Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	2005_365
id	2005_365
authors	Voigt, Andreas, Linzer, Helena, Mayerhofer, Rainier and Walchhofer, Hans Peter
year	2005
title	Competitive Support by Visual Simulation
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 365-370
doi	https://doi.org/10.52842/conf.ecaade.2005.365
summary	In this article the range of visual simulations for the competitive support is discussed and critically analysed by means of numerous definite competitions carried out within the working field of the authors – the range of experience concerning this matter covers a period of fifteen years (easily), all analysed examples were supported with the aid of CAAD/CAP-technologies. Recommendations are formulated and put forward for discussion. Furthermore the aspect of different acceptance of different presentational qualities (Levels of Detail) with the persons involved in the decision-making process are addressed (differences between socalled experts and laymen are particularly scrutinised).
keywords	Visual Simulation, Competitive Support
series	eCAADe
email
last changed	2022/06/07 07:58

_id	2005_771
id	2005_771
authors	Gavrilou, Evelyn, Bourdakis, Vassilis and Charitos, Dimitris
year	2005
title	Documenting the Spatial Design of an Interactive Multisensory Urban Installation
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 771-778
doi	https://doi.org/10.52842/conf.ecaade.2005.771
summary	The paper documents the design and implementation of an interactive multi-sensory environment (DETOUR) created by the interdisciplinary group VE_Design for an international open-air exhibition in Athens, Greece during the summer of 2004. The paper describes the creative process followed throughout the project and registers how computers, sensors and effectors have been utilised to either facilitate the creation of electronically mediated experiences or support the design. The architectural concept of the multi-sensory installation is analyzed in relation to its potential for creating communicative experiences as well as addressing physical form simulations. Notions such as ephemeral structures, parasites, social space, game as art and communication are discussed. The body – space interaction is investigated, enabling the team to elaborate on a modular construction. Finally, the impact of the work is discussed on the basis of recorded observations by visitors.
keywords	Interactive Multi-Sensory Environment; Ephemeral Space; Public Art;Embodied Spatial Experience; Simulation of Physical Form.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	2005_787
id	2005_787
authors	Veikos, Cathrine
year	2005
title	The Post-Medium Condition
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 787-794
doi	https://doi.org/10.52842/conf.ecaade.2005.787
summary	Theorists in art, architecture and visual media have described the digital world as a world of mediumlessness and proclaimed that the medium of a work, once the ontological determinant for the classification of the arts, is rendered meaningless by recent technological and cultural developments (Krauss, 2000; Negroponte, 1995; Manovich, 2001). Although indebted to specific media-based techniques and their attendant ideologies, software removes the material reality of techniques to an immaterial condition where the effects of material operations are reproduced abstractly. This paper asserts that a productive approach for digital design can be found in the acknowledgement that the importance of the digital format is not that it de-materializes media, but that it allows for the maximum intermingling of media. A re-conceptualization of media follows from this, defined now as, a set of conventions derived from the material conditions of a given technical support, conventions out of which to develop a form of expressiveness that can be both projective and mnemonic (Krauss, 2000). The paper will focus on the identification of these conventions towards the development of new forms of expressiveness in architecture. Further demonstration of the intermingling of materially-based conventions is carried out in the paper through a comparative analysis of contemporary works of art and architecture, taking installation art as a particular example. A new design approach based on the maximum intermingling of media takes account of integrative strategies towards the digital and the material and sees them as inextricably linked. In the digital “medium” different sets of conventions derived from different material conditions transfer their informational assets producing fully formed, material-digital ingenuity.
keywords	Expanded Architecture, Art Practice, Material, Information, ParametricTechniques, Evolutionary Logics
series	eCAADe
email
last changed	2022/06/07 07:58

_id	2005_349
id	2005_349
authors	Rafi, Ahmad, Izani, Mohd and Tinauli Musstanser
year	2005
title	High Dynamic Range Image (HDRI) Rendering
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 349-356
doi	https://doi.org/10.52842/conf.ecaade.2005.349
summary	This paper suggests a method known as High Dynamic Range Image (HDRI) to pre-visualise architectural elements in three-dimensional (3D) environment used by Computer Graphic Imaging (CGI) film-makers to integrate 3D models and characters into live action background (special effect). This Intensification Research Priority Area (IRPA) grant project was developed to suggest ways to achieve effective rendering solution and composition of the final output. It will focus on experimental modelling of local cultural elements that provides solutions for radiosity-type effects and dirt shadings. A set of data from an established site (i.e. environment) was captured and represented in High Dynamic Range (HDR) file. This data is integrated with architectural elements (e.g. 3D objects) and then pre-rendered to get the 3D visualisation of the actual environment. Several different exposures were also captured and tested to establish the correct rendering and lighting condition. This earlier result shows that HDRI method provides accurate visualisation and drastically reduces the rendering time without compromising the data (images) with accurate lighting. This paper will demonstrate the process of HDRI, compare the visual impact with ‘radiosity’ technique and other related rendering solutions and present the results, which are useful for architectural animation, simulation and other modelling developments.
keywords	HDRI, Pre-Visualisation, Modelling, Rendering
series	eCAADe
email
last changed	2022/06/07 07:59

_id	2005_287
id	2005_287
authors	Achten, Henri and Reymen, Isabelle
year	2005
title	Structured Reflection as a Means to Deepen Understanding of CAAD
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 287-294
doi	https://doi.org/10.52842/conf.ecaade.2005.287
summary	In this paper we outline a strategy of structured reflection to improve reflection by students in a course on the implication of CAAD, design theory, and design methodology. Earlier editions of the course showed that students often did not evolve their learning beyond a checklist level. Reflection is an important mechanism to improve learning from design situations. After a consideration of the main approaches to design reflection, we take up Schön’s notion of reflection and provide support for structured reflection in CAAD education, based on earlier experiences with structured question lists in a civil engineering course. Findings after the first year’s run show a deeper level of reflection on a more elaborate level.
keywords	Structured Reflection, CAAD, Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_131
id	2005_131
authors	Bailey, Rohan
year	2005
title	Digital Tools for Design Learning
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
doi	https://doi.org/10.52842/conf.ecaade.2005.131
summary	There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords	Design Education, Digital Design, Teaching Tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_665
id	2005_665
authors	Brito, Tiago, Fonseca, Manuel J. and Jorge, Joaquim A.
year	2005
title	DecoSketch – Towards Calligraphic Approaches to Interior Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 665-670
doi	https://doi.org/10.52842/conf.ecaade.2005.665
summary	Computer-Aided Design tools have long played an important role in architecture design. However, we need to go beyond direct manipulation to devise new tools that will expedite the interior design and decoration. Indeed, conventional CAD systems, while providing ever increasing functionality, do not provide equal support to the drafting and drawing tasks. This makes even the simplest drawings a complicated endeavor. Draftspeople struggle with different concepts that those learnt from their earlier days in school and have to think long and hard to translate familiar sequences of operations to commands which require navigating a dense jungle of menus. The term calligraphic interfaces was coined by us to designate a large family of applications organized around the drawing paradigm, using a digital stylus and a tablet-and-screen combination as seen most recently in Tablet PCs®. Using these, users can enter drawings in a natural manner, largely evocative of drafting techniques that were perfected for pencil-and-paper media. This paper presents a simple calligraphic interface to explore interior design literally from the ground up. The Decosketch application is a modeling and visualization tool structured around 2 _D architectural plants. Its purpose is to help architects or customers easily creating and navigating through house designs starting from the floorplan and moving to their three-dimensional representation. Moreover, both 2D and 3D representations can be independently edited, providing a natural interface that tries to adhere to well-known representations and idioms used by architects when drafting using pencil and paper.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_599
id	2005_599
authors	Couceiro, Mauro
year	2005
title	Architecture and Biological Analogies
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 599-606
doi	https://doi.org/10.52842/conf.ecaade.2005.599
summary	The study described in this paper evolves within the larger context of a research aimed at inquiring into analogies between architecture and nature, and more specifically between architecture and biology. Biology is a recursive source of architectural inspiration due to the tight relationship between form and function, the natural balance of forces and the corresponding geometric solutions found in living beings. Roughly, one can classify historical analogies between architecture and biology into two main categories. The first tries to mimic biological forms and the second biological processes. The specific goal of the described study is to find how new technologies can redefine and support the process of constructing such analogies. It uses as a case study a tower project designed by the architect Manuel Gausa (ACTAR, Barcelona) called Tornado Tower because of its complex shape inspired in the frozen form of a tornado. Due to the geometric irregularities of the tower, Gausa’s team had difficulties in designing it, especially because solving the structural problems required constant redrawing. This paper describes the first part of the study which primary goal was to conceive a parametric program that encoded the overall shape of the Tornado Tower. The idea was to use the program to simplify the drawing process. This required a mathematical study of spirals and helices which are at the conceptual basis of the external structure and shape of the tower. However, the program encodes not only the shape of Gausa’s tower, but also the shapes of other buildings with conceptual similarities. Such class of shapes is very recurrent in nature with different scales and with different utilities. Therefore, one can argue that the program makes a mathematical connection between a given natural class of shapes and architecture. The second part of the study will be devoted to extending the program with a genetic algorithm with the goal of guiding the generation of solutions taking into account their structural fitness. This way, the analogy with genetic procedures will be emphasized by the study of the evolution of forms and its limits of feasibility. In summary, the bionic shape analogy is made by the generation of mimetic natural forms and a genetic process analogy starts with the parametric treatment of shape based on code manipulations. At the end the program will establish an analogy between architecture and biology both terms of form and process.
keywords	Genetics; Evolutionary Systems; Parametric Design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	2005_629
id	2005_629
authors	Koutamanis, Alexander
year	2005
title	A Biased History of CAAD
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 629-637
doi	https://doi.org/10.52842/conf.ecaade.2005.629
summary	The democratization and popularization of the computer has brought on fundamental changes to many areas related to computer science, including CAAD. Such areas have been facing the necessity to reposition and reorient themselves in rapidly evolving academic and professional frameworks. A factor that complicates the processes of repositioning and reorientation is that most areas have a short but varied and frequently incoherent history that may be poorly understood. The paper is an attempt to trace the history of CAAD by means of publications. This refers to both key publications and the thematic structure of the overall CAAD production. The underlying hypothesis is that CAAD derives from two distinct ambitions, the technology-driven, bottom-up development of architectural computer graphics and the more domain theory-minded, top-down automation of designing. A third, less popular ambition is the computerization of analysis and evaluation, which can be treated as a subcategory of the previous two. The results of the bibliographic analysis are summarized in a timeline that indicates a convergence of ambitions and approaches in the 1980s, the period when CAAD became a recognizable area. In the 1990s the democratization and popularization of the computer caused diversification of CAAD activities over a wide spectrum, ranging from support to end-use of computer systems to computational theory and including the development of advanced, specific applications in cooperation with other architecture, building or design specializations.
keywords	History; Bibliography; Drawing; Design; Computerization
series	eCAADe
email
last changed	2022/06/07 07:51

_id	2005_797
id	2005_797
authors	Petzold, Frank and Donath, Dirk
year	2005
title	Tailor-made: Adapting and Extending CA(A)Dsystems
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 797-803
doi	https://doi.org/10.52842/conf.ecaade.2005.797
summary	CA(A)D systems are nowadays a part of everyday architectural practice and have completely replaced drawing with pen and T-square. The standard functions of such systems are (usually) sufficient for the everyday needs of practical work. The question is: can CA(A)D systems be adapted to improve work efficiency for specific users or applications such as those of the architect? Most current CA(A)D systems already provide some level of support for individual adaptation however these are rarely exploited by the end users. This paper discusses the teaching of skills for adapting and extending existing CA(A)D systems in current architectural education. In addition to the teaching of programming and operational skills, the course also examines the critical examination of CA(A)D systems and the formulation of user requirements (analysis), the search for existing solutions, functions or extensions (research) and the technical adaptation or extension of the system (software development). Using examples from current coursework, the paper illustrates both process and results of teaching practice.
keywords	Digital Design Education, 2D Representation, Design Process, 3D Modeling, Education in CAAD
series	eCAADe
email
last changed	2022/06/07 08:00

_id	2005_647
id	2005_647
authors	Caldas, Luisa G.
year	2005
title	Three-Dimensional Shape Generation of Low-Energy Architectural Solutions using Pareto Genetic Algorithms
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 647-654
doi	https://doi.org/10.52842/conf.ecaade.2005.647
summary	This paper extends on a previous work on the application of a Generative Design System [GDS] to the evolution, in a computational environment, of three-dimensional architectural solutions that are energy-efficient and adapted to the climatic environment where they are located. The GDS combines a well-known building energy simulation software [DOE2.1E] with search procedures based on Genetic Algorithms and on Pareto optimization techniques, successfully allowing to tackle complex multi-objective problems. In the experiments described, architectural solutions based on a simplified layout were generated in response to two often-conflicting requirements: improving the use of daylighting in the space, while controlling the amount of energy loss through the building fabric. The choice of a cold climate like Chicago provided an adequate framework for studying the role of these opposing forces in architectural form generation. Analysis of results shows that building characteristics that originate successful solutions extend further than the building envelope. Issues of massing, aspect ratio, surface-to-volume ratio, orientation, and others, emerge from the analysis of solutions generated by the GDS, playing a significant role in dictating whether a given architectural form will prove adapted to its climatic and energy requirements. Results suggest that the questions raised by the exploration of form generation driven by environmental concerns are complex, deserving the pursuit of further experiments, in order to better understand the interaction of variables that the evolutionary process congregates.
keywords	Generative Design System, Genetic Algorithms, Evolutionary Architecture, Artificial Intelligence in Design, Building Energy Simulation, Bioclimatic Architecture, Environmental Design.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_295
id	2005_295
authors	Ducla-Soares, Gonçalo
year	2005
title	Audiovisual Interfaces for Designing and Thinking about Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 295-302
doi	https://doi.org/10.52842/conf.ecaade.2005.295
summary	We propose to use computing technology in order to explore the ideas put forward by the Bauhaus regarding the incorporation of musical thinking in visual design and design education. Five audiovisual interfaces were developed in order to study how basic design knowledge can be naturally conveyed to students using music as an intermediary.
keywords	Design Education; Music; Interactivity; Audiovisual Interface
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2005_357
id	2005_357
authors	Pita, Javier
year	2005
title	Analogous Models and Architecture
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 357-364
doi	https://doi.org/10.52842/conf.ecaade.2005.357
summary	Among the many possible ways of classifying the concept of “modelling”, Maldonado refers to “homologies” when structure but not shape and function are similar; “analogies” when structure and function are similar, but not shape; and “isomorphisms” when structure and shape are similar, but function may or may not be similar. Traditional artistic representation would basically fall into the category of isomorphisms, whilst analogous models are to be found mainly in activities such as magic, play or industry. Other ways of representing reality, such as architectural models or drawings, are also traditionally regarded as isomorphisms. In the course of the last century, this panorama has been altered somewhat by the post-industrial or second industrial revolution in computing and communications. Using mathematical algorithms, the computing tool has an enormous capacity to describe things of extremely diverse nature: from the shape of everyday objects to relatively complex human behaviours, these can all be described using the common language of bits. Alongside developments in computing, the world of communications has been providing us with increasingly advanced means of transmitting information, including sophisticated systems capable of emulating our own perceptions. This paper is intended as a contribution to the theoretical debate conducted over recent years on the considerable shift that has occurred in architectural representation techniques. The analysis that follows highlights a two-fold change in traditional representation techniques: on the one hand, a change in the nature of the model (as is discussed in this paper); and on the other, a modification of the interfaces or communication and perception mechanisms of the model. The conjunction of these two factors has led to the emergence of representation modes that can no longer be regarded simply as isomorphisms of reality. Insofar as virtual spaces have the capacity for us to move, to interact, in short to inhabit them, they should be regarded as “analogous models” of architectural space. In other words, there has been a shift away from representation modes based on illusion in favour of those based on simulation.
keywords	Representation, Models, Virtual Space, Virtual Reality
series	eCAADe
email
last changed	2022/06/07 08:00

_id	2005_407
id	2005_407
authors	Post, Jelle and Koutamanis, Alexander
year	2005
title	Simulation for Daylighting in the Real World
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 407-414
doi	https://doi.org/10.52842/conf.ecaade.2005.407
summary	Technology has been an obvious solution to the increasing complexity of the built environment. As the number and specificity of use requirements increases, designers, clients and managers tend to segment the overall problem to manageable aspects only tentatively linked to each other. As a result, aspects such as ventilation and lighting tend to rely more on mechanical means than on the affordances of the overall design. Ironically this increases the complexity and opacity of the built environment probably to a greater extent than rules, regulations and requirements. The paper presents a review of available computational methods and techniques that aim at a more coherent approach by supporting integration of (day)lighting into architectural designing. It proposes that the two main courses of further action are the improvement and updating building regulations, and the combination of quantitative knowledge of good, existing daylight designs with advanced simulation-based analyses of early design proposals. Improvements in daylighting design and the integration of daylighting in design solutions depend primarily on design guidance based on the coordinated development and thorough understanding of usable measures such as the Daylight Factor, the Daylight Performance Index and function factors. A major prerequisite to both simulation and design guidance are robust and detailed geometrical 3D models that accommodate both the input and the output of design actions and transactions.
keywords	Simulation; Daylight; Integration
series	eCAADe
email
last changed	2022/06/07 08:00

_id	2005_507
id	2005_507
authors	Romão, Luis
year	2005
title	Can a Computer Implementation Based on Set Grammars Allow Emergent Shapes?
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 507-514
doi	https://doi.org/10.52842/conf.ecaade.2005.507
summary	In a previous paper, (Romão 2005) it was shown that a designer could create his own rules and combine them for application in a deterministic way using a computational device based on Set Grammars called SGtools. Using this device, the designer can assess the results in a visual manner and then change the rules without any knowledge of a programming language. This work examines whether SGtools can deal with emergence by coupling the representational abilities of Set Grammars with the search power of hybrid algorithm inspired on Genetic and Taboo search algorithms. The use of this search algorithm enhances the ability of the designer to explore solutions in practical time thereby enabling him/her to find unexpected, emergent solutions.
keywords	Shape Grammars, Generative Design; Prediction and Evaluation
series	eCAADe
email
last changed	2022/06/07 07:56

_id	2005_391
id	2005_391
authors	Suneson, Kaj, Wernemyr, Claes, Westerdahl, Börje and Allwood, Carl Martin
year	2005
title	The Effect of Stereovision on the Experience of VR Models of the External Surroundings and the Interior of a Building
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 391-398
doi	https://doi.org/10.52842/conf.ecaade.2005.391
summary	Virtual reality offers considerable promise with regard to facilitating the building process. A good example is the facilitation of communication between architects and building companies, sellers and buyers or between community planners and the general public. It is often thought that in order to utilise the potential of VR in, for example, the above-mentioned contexts, it is necessary to use fully fledged versions of VR, including stereovision and the possibility of controlling the VR show. However, if a model can also be presented on less advanced equipment and still interpreted in a way that is useful to the viewer it will be possible to distribute the model simply and effectively. This would make it easier to create a more democratic urban planning process compared with if specialised equipment needed to be used and special shows needed to be arranged. In this study we compared the experience of two VR models (a large indoor exhibition hall and an outdoor street in Gothenburg, Sweden) when presented with and without stereovision. When the experience was measured using the Semantic Environmental Scale (the SMB scale, developed by Küller, 1975, 1991), questions on the experience of presence and six other questions on the experience of the models, the results only revealed one indication that stereovision made a difference. This indication was the result for the SMB factor Enclosedness. Suggestions are presented for future research in this area.
keywords	Design Process; Virtual Environments; Human-Computer Interaction; 3D City Modelling; Environmental Simulation
series	eCAADe
email
last changed	2022/06/07 07:56

_id	2005_557
id	2005_557
authors	Barelkowski, Robert
year	2005
title	Web-based Social Participation in the Process of Town Planning
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 557-564
doi	https://doi.org/10.52842/conf.ecaade.2005.557
summary	The paper discusses the principles of using internet nested “Citizen” system that composes the platform to exchange information between different participants of planning procedure. As a part of P.R.S. method instrumentation, “Citizen” allows multidirectional interaction of planners, authorities and users of space. The paper shows various aspects of system structure, pointing out the most significant application abilities, the role different contents of the system play and services they provide to participants. The article summarizes the results of application, discusses the impact, web-based social participation has on efficiency of planning procedure, elimination of conflicts and understanding of planning problematics.
keywords	Web-Based Planning Support, Programming Implementations for TownPlanning, User Participation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_829
id	2005_829
authors	Boeykens, Stefan and Neuckermans, Herman
year	2005
title	Scale Level and Design Phase Transitions in a Digital Building Model
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 829-836
doi	https://doi.org/10.52842/conf.ecaade.2005.829
summary	Research and development on Computer Aided Architectural Design often focuses on simulating a building as a digital model. Our research on the early design stages explores concepts we feel are lacking in current design tools and research projects. Building models are usually static models, serving as a snapshot of the design. We aim to support design phase and scale level transitions, to better support the workflow of the designer. This paper formulates our approach at supporting transitions in an integrated design environment for architecture.
keywords	CAAD, Architectural Modeling, Design Process
series	eCAADe
email
last changed	2022/06/07 07:52

_id	2005_715
id	2005_715
authors	Chitchian, Davood and Bekkering, Henco
year	2005
title	A Decision Support Tool for Decision Makers
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 715-721
doi	https://doi.org/10.52842/conf.ecaade.2005.715
summary	Many decisions in a multidisciplinary and interdisciplinary process, as an intelligent activity, are too complex for decision makers to make choices based solely on instinct. The complexity stems from this fact that such activities cannot be defined precisely. Also satisfying goals depend on achievement of several interrelated tasks which cannot be solved simultaneously. Our decision support tool uses a mathematical application so called Analytical Hierarchy Process as a decision making aid. The developed tool provides a powerful and flexible mean for tackling the complex decision process into a simple concept of hierarchy, which incorporates factors influencing the decision alternatives in a systematic way.
keywords	Decision Support System; AHP; Eigenvalue; Construction Industry
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2005_399
id	2005_399
authors	Johansson, Mikael and Roupé, Mattias
year	2005
title	From CAD to VR – Implementations for Urban Planning and Building Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 399-405
doi	https://doi.org/10.52842/conf.ecaade.2005.399
summary	At present time, three-dimensional objects are often represented with 2D-data in urban planning and building design. In order to get all the involved parties to fully understand a certain project, this may not be enough. More and more projects therefore take use of the Virtual Reality (VR) technique as a complement to traditional 2D drawings and sketches. All the involved parties can then share a common frame of reference for all discussions regarding a certain project. Unfortunately, the technique is not yet adapted to fit the current building design process. In this paper, we present a solution for semi-automatic generation of a VR-model based on 3D CAD information and aerial photos obtained from the City Planning Authorities in Sweden. The data is imported to support real-time editing of terrain, roads and buildings. We also present a framework for importing 3D-models created in Autodesk Revit which enables a seamless integration of modern 3D CAD and VR-models. The features are implemented in a software developed at Chalmers Visualization studio (Gothenburg, Sweden) and technical details about terrain handling and speed-up techniques will be given.
keywords	Virtual Reality; 3D City modeling; Urban planning; Terrain; Visualization
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: