Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 67

Reformat results as: short short into frame detailed detailed into frame

_id	2005_647
id	2005_647
authors	Caldas, Luisa G.
year	2005
title	Three-Dimensional Shape Generation of Low-Energy Architectural Solutions using Pareto Genetic Algorithms
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 647-654
doi	https://doi.org/10.52842/conf.ecaade.2005.647
summary	This paper extends on a previous work on the application of a Generative Design System [GDS] to the evolution, in a computational environment, of three-dimensional architectural solutions that are energy-efficient and adapted to the climatic environment where they are located. The GDS combines a well-known building energy simulation software [DOE2.1E] with search procedures based on Genetic Algorithms and on Pareto optimization techniques, successfully allowing to tackle complex multi-objective problems. In the experiments described, architectural solutions based on a simplified layout were generated in response to two often-conflicting requirements: improving the use of daylighting in the space, while controlling the amount of energy loss through the building fabric. The choice of a cold climate like Chicago provided an adequate framework for studying the role of these opposing forces in architectural form generation. Analysis of results shows that building characteristics that originate successful solutions extend further than the building envelope. Issues of massing, aspect ratio, surface-to-volume ratio, orientation, and others, emerge from the analysis of solutions generated by the GDS, playing a significant role in dictating whether a given architectural form will prove adapted to its climatic and energy requirements. Results suggest that the questions raised by the exploration of form generation driven by environmental concerns are complex, deserving the pursuit of further experiments, in order to better understand the interaction of variables that the evolutionary process congregates.
keywords	Generative Design System, Genetic Algorithms, Evolutionary Architecture, Artificial Intelligence in Design, Building Energy Simulation, Bioclimatic Architecture, Environmental Design.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2006_168
id	2006_168
authors	Papalexopoulos, Dimitris
year	2006
title	Digital Territories and the Design Construction Continuum
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 168-174
doi	https://doi.org/10.52842/conf.ecaade.2006.168
summary	The purpose of the paper is to bring together the two newly elaborated concepts of Digital Territories (DT) and Design Construction Continuum (DCC) in order to approach the design of evolving – intelligent environments.Digital Territories is a concept elaborated 2005 by a Core Expert Group, conceived as an ephemeral Ambient Intelligence (AmI) space. DTs formed through the interconnection of physical objects embedding digital technologies, postulate the integration of the physical and the digital world, searching for operative definitions of new evolving in time functionalities. In DT’s, bridges between the physical and the digital are discrete elements disposing of certain autonomy in their conception and internal structure. Bridges have to be designed and located. The DCC proposes to relate design, fabrication and construction through information networks (it is in fact a DT). Through the DCC approach, design information is becoming construction information and industrial fabrication information. The DCC has to integrate interaction design and respond to questions posed by DTs design. DTs are integrated to DCC by constituting an intermediate level between building programming and design. Intelligent Building Components, that is AmI components operating as bridges between the physical and the digital in Digital Territories formations, cooperating to develop swarm intelligence applications to architectural space, are elements managed by the DCC. DT’s are about spaces communicating and the DCC is about communicating (design) space.
keywords	Digital Territories; Design Construction Continuum; Interaction Design; Evolving Environments; Intelligent Environments; Location Diagrams; Building Programming
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ac12
id	ac12
authors	Akin, Ö.; R. Krishnamurti, K.P. Lam (eds)
year	2005
title	Generative CAD Systems
source	Singapore: Carnegie Mellon University, 2005
summary	In the new millennium, Computer Aided Design has emerged as the most potent technological innovation in design. As BIM promises to integrate design tasks vertically and horizontally through graceful data exchange, new frontiers appear to researchers and practitioners as potential watershed events of the next decade. Generative approaches, a venerable engagement of computational design, is emerging as one of these. The proceedings of the Generative CAD Symposium held at Carnegie Mellon University, both summarizes the three decades of work in this area and reveals the beginnings of research and application expected in this domain. After all, will designers be able to effortlessly and intelligently generate potential design solutions that respond to appropriate design requirements and designers’ intentions?
series	book
type	normal paper
email
more	http://www.andrew.cmu.edu/user/oa04/publications_books.html
last changed	2008/09/04 07:18

_id	ecaade2017_184
id	ecaade2017_184
authors	Almeida, Daniel and Sousa, José Pedro
year	2017
title	Tradition and Innovation in Digital Architecture - Reviewing the Serpentine Gallery Pavilion 2005
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 267-276
doi	https://doi.org/10.52842/conf.ecaade.2017.1.267
summary	Please write your aToday, in a moment when digital technologies are taking command of many architectural design and construction processes, it is important to examine the place and role of traditional ones. Designed by Álvaro Siza and Eduardo Souto de Moura in collaboration with Cecil Balmond, the Serpentine Gallery Pavilion 2005 reflects the potential of combining those two different approaches in the production of innovative buildings. For inquiring this argument, this paper investigates the development of this project from its conception to construction with a double goal: to uncover the relationship between analogical and digital processes, and to understand the architects' role in a geographically distributed workflow, which involved the use of computational design and robotic fabrication technologies. To support this examination, the authors designed and fabricated a 1:3 scale prototype of part of the Pavilion, which also served to check and reflect on the technological evolution since then, which is setting different conditions for design development and collaboration.bstract here by clicking this paragraph.
keywords	Serpentine Gallery Pavilion; Computational Design; Digital Fabrication; Wooden Construction; Architectural Representation;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia05_012
id	acadia05_012
authors	Anshuman, Sachin
year	2005
title	Responsiveness and Social Expression; Seeking Human Embodiment in Intelligent Façades
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 12-23
doi	https://doi.org/10.52842/conf.acadia.2005.012
summary	This paper is based on a comparative analysis of some twenty-six intelligent building facades and sixteen large media-facades from a socio-psychological perspective. It is not difficult to observe how deployment of computational technologies have engendered new possibilities for architectural production to which surface-centeredness lies at that heart of spatial production during design, fabrication and envelope automation processes. While surfaces play a critical role in contemporary social production (information display, communication and interaction), it is important to understand how the relationships between augmented building surfaces and its subjects unfold. We target double-skin automated facades as a distinct field within building-services and automation industry, and discuss how the developments within this area are over-occupied with seamless climate control and energy efficiency themes, resulting into socially inert mechanical membranes. Our thesis is that at the core of the development of automated façade lies the industrial automation attitude that renders the eventual product socially less engaging and machinic. We illustrate examples of interactive media-façades to demonstrate how architects and interaction designers have used similar technology to turn building surfaces into socially engaging architectural elements. We seek opportunities to extend performative aspects of otherwise function driven double-skin façades for public expression, informal social engagement and context embodiment. Towards the end of the paper, we propose a conceptual model as a possible method to address the emergent issues. Through this paper we intend to bring forth emergent concerns to designing building membrane where technology and performance are addressed through a broader cultural position, establishing a continual dialogue between the surface, function and its larger human context.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia05_170
id	acadia05_170
authors	Barker, Daniel and Dong, Andy
year	2005
title	A Representation Language for a Prototype CAD Tool for Intelligent Rooms
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 170-183
doi	https://doi.org/10.52842/conf.acadia.2005.170
summary	Intelligent rooms are a type of intelligent environment which enhance ordinary activities within the confines of a room by responding to human interaction using pervasive and ubiquitous computing. In the design of intelligent rooms, the specification of how the intelligent room enacts intelligent behavior through computational means is as integral as the geometric description. The self-aware and context-aware capabilities of intelligent rooms extend the requirements for computer-aided design tools beyond 3D modeling of objects. This article presents a Hardware as Agents Description Language for Intelligent Rooms (HADLIR) to model hardware in an intelligent room as “hardware agents” having sensor and/or effector modalities with rules and goals. End-users describe intelligent room hardware as agents based on the HADLIR representation and write agent rules and goals in Jess for each hardware component. This HADLIR agent description and the requisite software sensors/effectors constitute “hardware agents” which are instantiated into a multi-agent society software environment. The society is then bridged to either a virtual environment to prototype the intelligent room or to microelectronic controllers to implement a physical intelligent room. The integration illustrates how the HADLIR representation assists in the design, simulation and implementation of an intelligent room and provides a foundation technology for CAD tools for the creation of intelligent rooms.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2005_1_69_73
id	cf2005_1_69_73
authors	BEILHARZ Kirsty
year	2005
title	Responsive Sensate Environments: Past and Future Directions
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 361-370
summary	This paper looks at ways in which recent developments in sensing technologies and gestural control of data in 3D space provide opportunities to interact with information. Social and spatial data, the utilisation of space, flows of people and dense abstract data lend themselves to visual and auditory representation to enhance our understanding of socio-spatial patterns. Mapping information to visualisation and sonification leads to gestural interaction with information representation, dissolving the visibility and tangibility of traditional computational interfaces and hardware. The purpose of this integration of new technologies is to blur boundaries between computational and spatial interaction and to transform building spaces into responsive, intelligent interfaces for display and information access.
keywords	responsive environments, sensate space, sonification, visualisation, gestural controllers
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	sigradi2020_112
id	sigradi2020_112
authors	Brandao, Jaqueline; Costa, Frederico Ribeiro; Silva, Geovany
year	2020
title	Morphological transformations in Brazilian peripheral areas: a case study of the Vila Cabral neighborhood at Campina Grande-PB
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 112-119
summary	This article describes an analysis of the morphological changes between 2005 and 2020 in the Vila Cabral neighborhood, located on the outskirts of the Brazilian city of Campina Grande. The research was developed in two different analytical scenarios, adopting the algorithmic- parametric computational implementation as a methodology, and applying the following procedures: (i) formal decomposition of a sample of the urban fabric; (ii) visibility graph analysis (VGA); (iii) analysis of the diversity of uses and (iv) analysis of urban density (populational and built). The study demonstrated that the association of different urban analysis tools strengthens decision-making in the context of evidence-based urban design.
keywords	Algorithmic-parametric urban analysis, Evidence-based design, Urban morphology, Campina Grande, Brazilian peripheral sprawl
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	cf2005_1_83_123
id	cf2005_1_83_123
authors	BRUNNER Klaus A. and MAHDAVI Ardeshir
year	2005
title	A Software Architecture for Self-updating Life-cycle Building Models
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 423-432
summary	This paper describes a computational infrastructure for the realization of a self-updating building information model conceived in the design phase and carried over to the operation phase of a building. As such, it illustrates how computational representations of buildings, which typically serve design support, documentation, and communication functions, can be transported into the post-construction phase. Toward this end, we formulate a number of requirements for the conception and maintenance of life-cycle building information models. Moreover, we describe the architecture and the prototypical implementation of such a model.
keywords	building models, sensors, simulation-based control, life-cycle
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	acadia05_156
id	acadia05_156
authors	Cabrinha, Mark
year	2005
title	From Bézier to NURBS: Integrating Material and Digital Techniques through a Plywood Shell
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 156-169
doi	https://doi.org/10.52842/conf.acadia.2005.156
summary	The development of digital fabrication has reintroduced material processes with digital processes. There has been much discussion about the tool and the objects of the tool, but little discussion of the implication of the material process on the digital process. A brief historical review on the development of computer numerical control and the origins of the Bézier curve reveals an instrumental fact: computer numerical controlled tools necessitated advancements in computational surfaces which eventually led to NURBS (Non-Uniform Rational B-Splines) surfaces. In other words, the origins of NURBS surfaces resides in its relation to material processes, rather than many current approaches that develop free form surfaces and then force the tool onto the material without regard to the material properties. From this historical and mathematical review, this project develops toward more intelligent construction methods based on the integration of NURBS differential geometry paired with material qualities and processes. Specifically, a digital technique of developing conceptual NURBS geometry into piecewise surface patches are then flattened based on the material thickness and density. From these flattened patches, a material technique is developed to intelligently remove material to allow the rigid flat material to re-develop into physical surface patches. The goal of this research is to develop digital and material techniques toward intelligent construction based on the correspondence between digitally driven surface and digitally driven material processes. The application of this technique as a rational and flexible system is to support the dynamic response of form and material toward such performative aspects as structure, daylight, ventilation, and thermal properties.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2005_214
id	sigradi2005_214
authors	Carnos Scaletsky, Celso
year	2005
title	Constructing a reflexive computational environment
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 214-218
summary	The learning of simple computer tools can represent an important resource to teach the complex design process in architecture. This article presents three didactic experiences that demonstrate certain design strategies normally used by architects and their relationship with the digital environment. By doing these design exercises, the students are invited to better understand the reflexive dialogue established with the design object. In these process notions as “references” and “sketches” should be approached. Instrumental resources are studied in parallel with epistemological reflection about the creative process. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2005_b_4c_b
id	caadria2005_b_4c_b
authors	Chang, Ting-Yuan
year	2005
title	Shift the Style: Supporting Product Design through Evolving Styles
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 240-245
doi	https://doi.org/10.52842/conf.caadria.2005.240
summary	How can we provide computational supports for product designers to actively utilize existing styles as driving force to achieve new designs? For a new style that can take the advantage from existing styles, we surveyed Case-Based Design and Case-Based Reasoning systems for product design and found discouraging results. We employ Learning Classifier Systems, a machine-learning paradigm, to perform automatic style classification. These classified styles are used to evolve new styles of designs.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2005_103
id	sigradi2005_103
authors	Clayton, Mark J.
year	2005
title	Computational design and AutoCAD: reading software as oral history
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 103-107
summary	Although the user interface and operation of AutoCAD may seem counter to architectural predilections, the software can be better understood in a historical context of themes of computational design, automated production drawings, and design graphics. Current interest in Building Information Modeling draws upon themes in architectural computing established 40 years ago and expressed in AutoCAD throughout its 25 year history.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	9c37
id	9c37
authors	Coates P, Derix C, Krakhofer S and Karanouh A
year	2005
title	Generating Architectural Spatial Configurations: two approaches using voronoi tessellations and particle systems
source	Proceedings of the Generative Arts conference, Milan, 2005
summary	It was one of the primary goals of the original Master’s programme in Computing and design at UEL in 1991 that we should work towards defining morphological generative processes for the conceptual design of architectural objects. These two papers offer a range of techniques which have been developed by two of this years MSc students (04-05) which show that we are getting close to this. The approaches range from computational geometric approaches (3d parametrics and voronoi diagrams) to emergent spatial organisation using agent based modelling. In many cases the resultant geometry is defined to the point where it can be transferred to advanced evaluation and fabrication systems, thus making this work sufficiently developed to begin to form a useful part in practical design processes.
keywords	morphology, computational geometry, particle systems, physical simulation, voronoi diagrams
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:39

_id	ijac20053403
id	ijac20053403
authors	Datta, Sambit; Beynon, David
year	2005
title	A Computational Approach to the Reconstruction of Surface Geometry from Early Temple Superstructures
source	International Journal of Architectural Computing vol. 3 - no. 4, 471-486
summary	Recovering the control or implicit geometry underlying temple architecture requires bringing together fragments of evidence from field measurements, relating these to mathematical and geometric descriptions in canonical texts and proposing "best-fit" constructive models. While scholars in the field have traditionally used manual methods, the innovative application of niche computational techniques can help extend the study of artefact geometry. This paper demonstrates the application of a hybrid computational approach to the problem of recovering the surface geometry of early temple superstructures. The approach combines field measurements of temples, close-range architectural photogrammetry, rule-based generation and parametric modelling. The computing of surface geometry comprises a rule-based global model governing the overall form of the superstructure, several local models for individual motifs using photogrammetry and an intermediate geometry model that combines the two. To explain the technique and the different models, the paper examines an illustrative example of surface geometry reconstruction based on studies undertaken on a tenth century stone superstructure from western India. The example demonstrates that a combination of computational methods yields sophisticated models of the constructive geometry underlying temple form and that these digital artefacts can form the basis for in depth comparative analysis of temples, arising out of similar techniques, spread over geography, culture and time.
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00002
last changed	2007/03/04 07:08

_id	ecaaderis2018_103
id	ecaaderis2018_103
authors	Davidová, Marie and Prokop, Šimon
year	2018
title	TreeHugger - The Eco-Systemic Prototypical Urban Intervention
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 75-84
keywords	The paper discusses co-design, development, production, application of TreeHugger (see Figure 1). The co-design among community and trans-disciplinary participants with different expertise required scope of media mix, switching between analogue, digital and back again. This involves different degrees of physical and digital 'GIGA-Mapping' (Sevaldson, 2011, 2015), 'Grasshopper3d' (Davidson, 2017) scripting and mix of digital and analogue fabrication to address the real life world. The critical participation of this 'Time-Based Design' (Sevaldson, 2004, 2005) process is the interaction of the prototype with eco-systemic agency of the adjacent environment - the eco-systemic performance. The TreeHugger is a responsive solid wood insect hotel, generating habitats and edible landscaping (Creasy, 2004) on bio-tope in city centre of Prague. To extend the impact, the code was uploaded for communities to download, local-specifically edit and apply worldwide. Thus, the fusion of discussed processes is multi-scaled and multi-layered, utilised in emerging design field: Systemic Approach to Architectural Performance.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	cf2005_2_51_24
id	cf2005_2_51_24
authors	DONATH Dirk and THUROW Torsten
year	2005
title	Integrated Computer-Assisted Building Surveying for Architectural Planning
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 183-192
summary	The paper describes a concept for the step-by-step computer-aided capture and representation of geometric building data in the context of planning-oriented building surveying. Selected aspects of the concept have been implemented and tested as prototypes. The process of step-by-step capture and representation is determined by the order in which the user experiences the building. Only the information that the user knows (can see) or can reasonably deduce is represented. In addition approaches to the flexible combination of different measuring techniques and geometric abstractions are described which are based upon geodetic computational adjustment. The paper also examines the flexible combination of different surveying techniques and geometric abstractions achieved with the help of geodesic computational adjustment methods. Selected aspects have been implemented and investigated as prototypes. All prototypes will be shown and discussed.
keywords	surveying techniques, geometric data capture, geometric representation, building information systems
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	2005_705
id	2005_705
authors	Dritsas, Stylianos
year	2005
title	The MiranScript
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 705-712
doi	https://doi.org/10.52842/conf.ecaade.2005.705
summary	This paper documents the implementation of a computational solution for a design project and presents a series of thoughts around the topic of architectural design as an act of intuitive calculation.
keywords	Design Computation, Calculation, Scripting, Rapid Prototyping, Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2005_155
id	sigradi2005_155
authors	Economou, Athanassios; Michael Herndon
year	2005
title	Linespace: An automated generation of the 19 spaces with 1 axis of growth
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 155-160
summary	The structures of 3-dimensional spaces with one axis of growth are discussed in detail. The mathematical structure of all 19 possible patterns is briefly discussed and a computational framework to generate these spaces is presented in the end.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ascaad2012_003
id	ascaad2012_003
authors	Elseragy, Ahmed
year	2012
title	Creative Design Between Representation and Simulation
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary	Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed	2012/05/15 20:46

For more results click below: