Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia05_226
id	acadia05_226
authors	Biloria, N., Oosterhuis, K. and Aalbers, C.
year	2005
title	Design Informatics
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 226-235
doi	https://doi.org/10.52842/conf.acadia.2005.226
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for envisaging complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This design-research approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. The hence extorted ‘point cloud’ configuration serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed script-routines, iteratively run calculations to generate steel-wireframes, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct hence enabling timely and effective construction of the conceptualized form.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2005_010
id	2005_010
authors	Aish, Robert
year	2005
title	From Intuition to Precision
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 10-14
doi	https://doi.org/10.52842/conf.ecaade.2005.010
summary	Design has been described as making inspire decisions with incomplete information. True, we may use prior knowledge, we may even think we understand the causalites involved, but what really matters is exploration: of new forms, of new materials, and speculation about the response to the resulting effects. Essentially, this exploration has its own dynamics, involving intuition and spontaneity, and without which there is no design. But of course we all know that this is not the whole story. Design is different to 'craft'; to directly 'making' or 'doing'. It necessarily has to be predictive in order to anticipate what the consequence of the 'making' or 'doing' will be. Therefore we inevitably have to counter balance our intuition with a well developed sense of premeditation. We have to be able to reason about future events, about the consequence of something that has not yet being made. There is always going to be an advantage if this reasoning can be achieved with a degree of precision. So how can we progress from intuition to precision? What abstractions can we use to represent, externalize and test the concepts involved? How can we augment the cognitive processes? How can we record the progression of ideas? And, how do we know when we have arrived? Design has a symbiotic relationship with geometry. There are many design issues that are independent of any specific configurations. We might call these “pre-geometric” issues. And having arrived at a particular configuration, there may be many material interpretations of the same geometry. We might call these “post-geometric” issues. But geometry is central to design, and without appropriate geometric understanding, the resulting design will be limited. Geometry has two distinct components, one is a formal descriptive system and the other is a process of subjective evaluation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2005_511
id	sigradi2005_511
authors	Barrow, Larry R.
year	2005
title	Man and machine: ideation and Making
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 511-516
summary	The realization of architecture, that is the building of the physical artifact, requires numerous collaborative participates that requires a communication network in order to realize the vision. All efforts to communicate a design idea prior to physical realization, that is manufacturing or construction, are forms of visualization (i.e. representation). Herein lies the fundamental problem, the designer(s) must en-vision, and communicate that which is to BE ... physical, yet is NOT... physical. In this paper, we will review the emerging Human-Computer-Interface and technology influences on process and product; here we find the “humanistic” component is a critical factor in the success of “digital” strategies.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_253
id	2005_253
authors	Breen, Jack and Stellingwerff, Martijn
year	2005
title	Towards Ornamatics
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 253-260
doi	https://doi.org/10.52842/conf.ecaade.2005.253
summary	Computer aided modelling and drafting protocols – in combination with new production technologies – have contributed to wholly new ways of shaping building elements. Some examples of new techniques, which have recently become very successful in building production and in architectural design education, are: 3D Rapid Prototyping; 2,5D and 3D Milling and computer aided Shape Cutting (notably using laser and water jet modes). Such new approaches not only create new opportunities for traditional production processes (including physical modelling), they also offer new perspectives for design and manufacturing on the level of architectural components and connections. We foresee innovative approaches to building product design, with a renewed interest in expressive Ornamentation. A phenomenological development we would like to address using the concept of ‘Ornamatics’. This contribution explores the potentials of product design with a renewed focus on ornamentation, involving the active utilization of computer aided modelling and manufacturing techniques. The paper furthermore documents results and findings of a series of explorative studies carried out within an educational laboratory environment.
keywords	Design Driven Research; Computer Aided Fabrication; Aesthetics; Ornamentation; Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_211
id	2005_211
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2005
title	The Quest for the Holy Grail – Holistic Collaborative Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 211-218
doi	https://doi.org/10.52842/conf.ecaade.2005.211
summary	Architectural design, due to phenomena such as globalisation of the construction process, delocalisation of professional and industrial activities, spread of new construction materials and components, and the challenges of environmental sustainability, has become so comlex that traditional ways of managing the process are no longer sufficient. What is more, architectural works are required to be ever more performing and integrated - holistic. The paradigm of collaborative design is gaining ground as a way of dealing with these problems. Various process/ product models have been proposed over the years, making more or less use of advanced tools. In this field this study proposes a model in which operators from various cultural contexts are each supported by Intelligent Assistants (agents). The model simulates the design of works of architecture to the best professional practice. Exchange of information and knowledge between the operators is essential to enhance the design process. From this follows the need to interface not just data, but also meanings. This article shows how to improve communications between different applications, used by different operators, so as to integrate information and knowledge, whether formalised or not, in a project managed collaboratively by means of XML.
keywords	Collaborative Design; Design Process Model; Distributed Knowledge Bases; Semantic Interfaces; aecXML
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2005_1_82_21
id	cf2005_1_82_21
authors	DE VRIES Bauke and HARINK Jeroen
year	2005
title	Construction Analysis during the Design Process
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 413-422
summary	4D CAD systems are used by contractors for visually checking the construction process. To enable simulation of the construction process, the construction planner links building components from a CAD model with the activities from a project planning. In this paper we describe a method to generate a project planning directly from a CAD model using basic construction knowledge. A case study is discussed briefly to show the current results and the shortcomings. Finally an outlook is presented on a more advanced implementation that is (also) useful for designers.
keywords	4D CAD, design process, construction analysis, automatic planning
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2005_467
id	2005_467
authors	Guéna, François
year	2005
title	Assisting 3D Modeling from Documents
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 467-476
doi	https://doi.org/10.52842/conf.ecaade.2005.467
summary	This paper presents research in computer modeling that ARIAM team of the school of architecture of Paris La Villette has been developing for several years. One of the aims of this research group is to develop computer systems that assist architects in modeling existing buildings or monuments from heterogeneous documents or data as drawings plans, sections, photos, measures taken on site etc. In spite of advances in computer recognition it’s a long way to have a system that could automatically recognize, from any bitmap document or photo, relevant architectural objects and automatically build the model these documents represent. However, if we could define a knowledge base about a particular domain, it would be possible to develop a system that could interpret specific documents that represent some kind of building or monuments. But, even in such limited domain, it is difficult to build an exhaustive knowledge base and user-interactions are generally required. We argue that a user could mark relevant information on the documents and thus facilitate the process of interpreting. The system we propose has three components: a graphical user interaction tool, an analyzer of documents and user interactions, and a generative tool that produces the required model. As an illustration, the paper presents a system we have developed which assists an architect in modeling a 3D mesh of gothic vaults for a finite elements analysis.
keywords	3D Modeling; Restitution; Knowledge Base System; Meshing; Gothic Vaults
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia05_212
id	acadia05_212
authors	Luhan, Gregory A.
year	2005
title	Modern Translations, Contemporary Methods: DL-1_Resonance House®
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 212-225
doi	https://doi.org/10.52842/conf.acadia.2005.212
summary	As the first design-build-fabricate-assemble experiment at our school, the intent of the studio was to design a framework from which to examine a “lived space” through digital-to-digital processes. Moving from digital models and physical stereo lithographic models to hand-fabrication and digital assembly allowed the students to move from creation to completion. As part of our holistic design process, the studio fabricated almost all components for the project. These elements include the wood flooring, the copper and wood skins, the building’s structural panels, and the two-story light vortex. This single-family, in-fill house is located within an historic downtown neighborhood and is subject to historic district zoning regulations, design guidelines, and Board of Architecture Review approvals. The project is analogous to design challenges presenting themselves in historic districts throughout the United States including the Savannah, Georgia site for the 2005 ACADIA Conference. The scale of the project relates well to the horizontal nature of this context and after a formal, televised review process with the local Board of Architecture Review, the project represents a dynamic, yet sympathetic architectural dialogue with the surrounding buildings. The project develops simultaneously from the exterior and interior resulting in two courtyards that mediate the urban “front door” and the private “terrace.” The students designed these areas through a series of two-dimensional axonometric drawings, three-dimensional physical and digital models, and four-dimensional time-based animations. The building massing separates into two core elements: gabled copper volume and wood screen volume. These elements maintain their conceptual purity by using the same types of modulations on their skins. The copper form with its deep-cut reveals and proportionally placed light scoring patterns reflects the horizontal datum lines of the floor, sill, threshold, and ceiling. In contrast, the wood volume reflects these same lines as applied “shadow screens” which create depths that seamlessly tie together the side, rear, and front facades.The hinge point of the house is the light vortex. Designed in Rhino, translated in Catia, fabricated out of aluminum, and clad in stainless steel, this two-story sculptural element will literally wrap light around its surfaces. Like a sunflower, the light vortex, with its angel hair stainless steel finish, responds to the incremental differentiation of light throughout the day. Photosensitive floor-mounted lights designed to augment the volume of natural light will provide a continuous light rendition on the sculpture. The project, scheduled for completion at the end of the 2005 summer session, is at the time of this submission about 60% complete.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	sigradi2005_133
id	sigradi2005_133
authors	Luhan, Gregory A.
year	2005
title	From art to part \| DL-1_Resonance house®
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 133-138
summary	Moving from digital models and physical stereo lithographic models to hand-fabrication and digital assembly allowed the students to move from creation to completion. As part of our holistic design process, the studio fabricated almost all components for the project. These elements include the wood flooring and cantilevered staircase, the copper and wood skins, the building’s structural panels, and the two-story light vortex. This project—a single-family, in-fill house located within an historic downtown neighborhood—is subject to historic district zoning regulations, design guidelines, and Board of Architecture Review approvals. The students designed these areas through a series of two-dimensional plans and axonometric drawings, three-dimensional physical and digital models, and four-dimensional time-based animations. The building massing separates into two core elements: a gabled copper volume and a wood screen volume. The hinge point of the house is the light vortex. Photosensitive floor-mounted lights designed to augment the volume of natural light will provide a continuous light rendition on the sculpture. The project is scheduled for completion in October 2005.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	2005_245
id	2005_245
authors	Lyon, Eduardo
year	2005
title	Design for Manufacturing in Architecture
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 245-252
doi	https://doi.org/10.52842/conf.ecaade.2005.245
summary	This paper explores new ways to integrate manufacturing processes information in to design phases. Through the analysis of related fields and looking at the relations between its design methods and production processes, we analyze design processes and design representations that already have embedded in them specific ways to materialize through production the artifacts they define. Subsequently, we explore curved surface fabrication using cutting and bending technologies. As a summary, we conceptualize from this top-down development approach to design a framework that integrates design and construction in architecture, based on three possible applications fields: - Design processes improvement - Building production process improvement - CAD-CAM Tools development.
keywords	Design Computing, Design Cognition, Digital Manufacturing
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2005_120
id	sigradi2005_120
authors	Lyon, Eduardo; Charles Eastman
year	2005
title	Design for manufacturing in architecture: mapping between the design and fabrication of curved surfaces
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 120-125
summary	This paper explores new ways to integrate manufacturing processes information in to design phases. Through the analysis of related fields and looking at the relations between its design methods and production processes, we analyze design processes and design representations that already have embedded in them specific ways to materialize through production the artifacts they define. Subsequently, we explore curved surface fabrication using cutting and bending technologies. As a summary, we conceptualize from this top-down development approach to design a framework that integrates design and construction in architecture, based on three possible applications fields: 1.) Design processes improvement; 2.) Building production process improvement; 3.) CAD-CAM Tools development. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia05_192
id	acadia05_192
authors	Modeen, Th,, Pasquire, C. and Soar, R.
year	2005
title	Design Ground - An Iconic Tactile Surface
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 192-199
doi	https://doi.org/10.52842/conf.acadia.2005.192
summary	This paper forms an intermediary summary of a project which aim is to suggest an alternate methodology for utilizing additive Rapid Manufacturing (an evolved rendition of Rapid Prototyping), for the conceptualization and fabrication of design and architecture. It plans to do so by establishing a methodology that is innate and a direct reflection of the additive RM production process. The project also aims to address the seemingly divisive discrepancy between the process of digitally conceiving a design and the intrinsically somatic way we perceive it. Such aims are explored through a surface design that is not predominantly guided by visually derived nodes but instead relies on a form of ‘tactile iconography’ as a means for expressing and amplifying various qualities and elements found in its vernacular. The resulting design would be very difficult, if not impossible, to make by any other means.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	sigradi2005_139
id	sigradi2005_139
authors	Orciuoli, Affonso
year	2005
title	Towards a non-standard architecture: design and manufacture as it relates to information systems
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 139-143
summary	The development of computer programs has brought about a new trend for architects and designers. Topology, splines, nurbs and the use of sophisticated computer programs, which were formerly possible only to be executed on powerful computers, have triggered an interest in architects. Ten years ago, computers started to replace traditional drawing tools. Nowadays it is possible to develop the whole architectural process in three dimensions (project and manufacturing), reaching certain proposals that otherwise would be impossible or very tedious and time-consuming to carry out. Information technology proposes a new architectonic language, already experimented in a virtual way, but one that can be made real by means of the computer numeric control. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	2005_679
id	2005_679
authors	Steinø, Nicolai and Veirum, Niels Einar
year	2005
title	A Parametric Approach to Urban Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 679-686
doi	https://doi.org/10.52842/conf.ecaade.2005.679
summary	It is the thesis of this paper, that the application of a parametric design approach to urban design has great potentials for improving the systematic testing and subsequent argumentation for urban design proposals. Parametric design has so far mainly been applied to engineering. However, the ‘components’ constituting an urban design also share similarities that may be defined parametrically. Aspects such as density, use, mix, form, space, and typology may all be defined parametrically. By doing so, it is possible to not only perform a systematic de-sign process, but also to evaluate the pros and cons of scenarios with different parametric settings. On the basis of a theoretical discussion, followed by a case study in the form of a student workshop, the paper will discuss the nature and scope of parametric urban design, draw some preliminary conclusions, and outline some possible perspectives for the development of parametric urban design.
keywords	Parametric, Parameters, Urban Design, Methodology, Workshop, CAD
series	eCAADe
email
last changed	2022/06/07 07:56

_id	791f
id	791f
authors	Stellingwerff, M. C.
year	2005
title	VIRTUAL CONTEXT - INVESTIGATING THE CHARACTERISTICS AND OPPORTUNITIES OF DIGITAL VISUALISATION MEDIA FOR SITUATED APPROACHES TO ARCHITECTURAL DESIGN IN AN URBAN ENVIRONMENT
source	Delft University Press
summary	This research initiative addresses the issue of Design in relation to Virtual Context. Central to this study are the innovative potentials and instrumental opportunities of computer based media techniques, capable of generating interactive models and changing perspectives for the benefit of urban and architectural design. The ambition was to not only make a contribution to the existing body of knowledge concerning digital technologies and their applications, but explore theoretical conditions which might help define and stimulate further study. From the outset, the focus was on furthering the opportunities for computer based representation media in creative design. On the basis of a series of explorative studies the subject of this research was targeted: the issue of Design in Context, or more specifically: Design(ing) in a Virtual Context. During the process there was a marked shift in the conception of the subject from – more or less immersive – VR technologies in the direction of approaches which might be expected to become readily available in practice and education and could be effective in actual design processes. This insight also brought about a shift in emphasis from realism per-se towards creating a sense of situatedness. The design representation system which was developed was intended to not just allow for one type of model view, but to afford an array of different views, from which the designer would be able to choose freely, depending on the phase and focus of design as well as personal preferences. A series of interface prototypes and support tools were developed especially and successively tested experimentally. For the intended final design driven experimental study, different virtual context models were considered. Eventually, an integral – purely fictitious – design ‘environment’ was constructed in the computer, so that the workings of the proposed system and its components would be tested systematically. A conscious choice was made for an in depth study, on a relatively modest scale, which would a certain amount of mutual involvement between designer and researcher, to confront the participants with the finer aspects of the proposed system in a relatively short time and to gather detailed data. A half dozen design professionals were invited to participate in a closely monitored experimental exercise. The results of this study therefore do not offer straightforward, indisputable facts, to be considered representative for the design community as a whole, but indicate that the working methods of the individual designers – when discovering aspects of the site, developing and presenting proposals and reflecting on the qualities of represented designs – tend to vary considerably. For this reason the interactive representation system proved to be of value. Participants could express different view preferences, with more or less realistic image modes being used in different phases of their design developments, with varying experiences of situatedness. Some of the design professionals participants were very appreciative of the system’s opportunities, others tended to be more ‘set in their ways’. The results of this experimental study indicate that there may particularly be opportunities for interface applications which are able to function interactively, offering individual designers – as well as others involved in evaluating design proposals – a variety of tools with which to approach specific design artefacts in their changing contexts. Virtual models can play not only an important role as a ‘reminder’ for the designer but also to other parties playing an active role in the design and implementation processes. Interactive environment models are not only promising as exploration tools for existing sites, but could be valuable to test the impact of a design on its location. This could be especially interesting if the site is difficult or impossible to visit or as yet a virtual construction. In addition such an approach might be beneficial for objective comparison and evaluation of design proposals in competitions and in education as well as in on-line collaborative design projects where the context is still in the process of being developed.
series	thesis:PhD
type	normal paper
email
more	http://www.bk.tudelft.nl/users/stelling/internet/
last changed	2005/03/02 22:40

_id	ecaadesigradi2019_253
id	ecaadesigradi2019_253
authors	Velandia Rayo, Diego Alejandro
year	2019
title	Option One-second Iteration - Analysis, evaluation and redesign of a rural housing prototype
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 187-194
doi	https://doi.org/10.52842/conf.ecaade.2019.1.187
summary	In 2005, the rural housing deficit in Colombia was 1,600,000 units, which is equivalent to 68.25% of the total households. This very high number shows the difficulties faced by public policies on rural housing. This deficit is partly due to logistical problems related to the supply of materials and complexity in construction processes. It is necessary to explore new alternatives to offer more and better homes at lower costs. The research project presented in this manuscript started in 2013 as an initiative to reduce the housing deficit. It proposed to build a rural housing prototype integrating digital manufacturing processes. The performance of part of the structural and enclosing system was evaluated during a first iteration process to include changes in a second iteration later. With the adjustments to the design process discussed here, the prototype is expected to be built and tested to measure its efficiency and functioning.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	sigradi2005_209
id	sigradi2005_209
authors	Quezada Gutiérrez, Marcelo; Andrés Cavieres Pinilla, Osvaldo Zorzano Betancourt
year	2005
title	Learning of digital tools trough its concurrent utilization: game design.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 209-213
summary	This educational experience intends to show that the concurrent application of the digital tools in a project of design permits a better learning of these, by means of an environment of collaborative work and utilizing tools of e-learning next to traditional systems of teaching. As a consequence of this experience we have the possibility to outline a methodology that already is being applied in our institution. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	sigradi2005_478
id	sigradi2005_478
authors	Abdelhameed, Wael
year	2005
title	Digital-Media Impact on the Decision-Making Capability of Architects
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 478-482
summary	The underlying assumption of the research is that media the representational environments of architects’ design thoughts, have impact on the way by which architects practice design and develop their design capabilities. This research aims at exploring the interrelationship between the media used by the architect and the development that might occur in the Decision-Making capability.The role of digital media in the architectural design process has become exploration and suggestion of what is being made, rather than, illustration of what has been already made. Depending on primary data (a global questionnaire) and secondary data (synthesis of the previous research), the results have substantiated the observation that there has been positive impact of digital media settings on the Decision-Making capability of architects. The analysis reveals some detailed findings, which provide a better understanding of the subject matter.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: