Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	cf2005_1_11_235
id	cf2005_1_11_235
authors	BURRY Mark
year	2005
title	Digitally Sponsored Convergence of Design Education, Research and Practice
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 3-22
summary	This paper looks at examples of successful transdisciplinary design projects that oblige a departure from the typical assertion of sub-discipline distinctions. In doing so a case is made for a new convergence between architectural design education, research and practice. A case for post digital design will also be made, defined here as the comprehensive assimilation of the computer within traditional modes of design practice, offering a more natural and productive state of affairs than the exclusively digital office promulgated especially during the previous decade. The paper concludes with a demonstration of transdisciplinary design teaching and practice, offering a post digital design framework that require radical new approaches to education and practice. It is contended here that only when CAAD research is undertaken conjointly within teaching and practice can the links be properly formed between the two.
keywords	transdisciplinary design, convergence, design practice, collaboration, post digital design
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	caadria2005_a_7b_a
id	caadria2005_a_7b_a
authors	Abdullah, A.Q.M. ; Md. Emran Hossain, Md. Shabab Habib Khan
year	2005
title	Digital Perception, Development and Presentation in Architecture: a study of Bangladesh with global context
doi	https://doi.org/10.52842/conf.caadria.2005.255
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 255-267
summary	In the recent past the computer has become an important tool in both the design and presentation media/method in architecture. In this paper digitalization in architectural practice and architectural education in both the global and Bangladesh contexts have been studied. A survey questionnaire was carried out to find how and to what extent available software are being used in Bangladesh for this purpose. Opinion, views, expectations of architects from leading architectural firms of Bangladesh were studied to understand the future prospect of this field in Bangladesh.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2005_a_1a_b
id	caadria2005_a_1a_b
authors	B. Senyapili, I. Basa
year	2005
title	RECONCILING COMPUTER AND HAND: THE CASE OF AUTHOR IDENTITY IN DESIGN PRESENTATIONS
doi	https://doi.org/10.52842/conf.caadria.2005.013
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 13-22
summary	As computers were newly emerging in the field of architectural design, it was claimed that the impact of computers would change the way architects design and present. However, within the course of computer use in design, although the field of architectural practice might have been altered extremely, in architectural education there still seems to be a bond to conventional mind-hand-paper relation. One of the reasons for that bond is the fact that although being r 1000 elated to many technologies, architecture essentially positions itself around an artistic core that is still fed with conventional modes of creation. Architectural education aims at adopting and working on this very core. One of the major contributors in the formation of this core is the presence of author identity. This paper makes a critical approach to computers in terms of expressing author identity in design presentations especially during design education. We believe that the author identity is important in design education in terms of identifying the potential and skills of the student. Especially in design education the final step of design process turns out to be the presentation, unlike architectural practice where the presented design is actually built. Within this conception, two different studies were held in an educational environment with 160 design students and 20 design instructors. The results of both studies pointed at the fact that the digital opportunities that exist for design education should evolve around preserving and underlining the author identity in design presentations.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	2005_131
id	2005_131
authors	Bailey, Rohan
year	2005
title	Digital Tools for Design Learning
doi	https://doi.org/10.52842/conf.ecaade.2005.131
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
summary	There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords	Design Education, Digital Design, Teaching Tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_797
id	2005_797
authors	Petzold, Frank and Donath, Dirk
year	2005
title	Tailor-made: Adapting and Extending CA(A)Dsystems
doi	https://doi.org/10.52842/conf.ecaade.2005.797
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 797-803
summary	CA(A)D systems are nowadays a part of everyday architectural practice and have completely replaced drawing with pen and T-square. The standard functions of such systems are (usually) sufficient for the everyday needs of practical work. The question is: can CA(A)D systems be adapted to improve work efficiency for specific users or applications such as those of the architect? Most current CA(A)D systems already provide some level of support for individual adaptation however these are rarely exploited by the end users. This paper discusses the teaching of skills for adapting and extending existing CA(A)D systems in current architectural education. In addition to the teaching of programming and operational skills, the course also examines the critical examination of CA(A)D systems and the formulation of user requirements (analysis), the search for existing solutions, functions or extensions (research) and the technical adaptation or extension of the system (software development). Using examples from current coursework, the paper illustrates both process and results of teaching practice.
keywords	Digital Design Education, 2D Representation, Design Process, 3D Modeling, Education in CAAD
series	eCAADe
email
last changed	2022/06/07 08:00

_id	791f
id	791f
authors	Stellingwerff, M. C.
year	2005
title	VIRTUAL CONTEXT - INVESTIGATING THE CHARACTERISTICS AND OPPORTUNITIES OF DIGITAL VISUALISATION MEDIA FOR SITUATED APPROACHES TO ARCHITECTURAL DESIGN IN AN URBAN ENVIRONMENT
source	Delft University Press
summary	This research initiative addresses the issue of Design in relation to Virtual Context. Central to this study are the innovative potentials and instrumental opportunities of computer based media techniques, capable of generating interactive models and changing perspectives for the benefit of urban and architectural design. The ambition was to not only make a contribution to the existing body of knowledge concerning digital technologies and their applications, but explore theoretical conditions which might help define and stimulate further study. From the outset, the focus was on furthering the opportunities for computer based representation media in creative design. On the basis of a series of explorative studies the subject of this research was targeted: the issue of Design in Context, or more specifically: Design(ing) in a Virtual Context. During the process there was a marked shift in the conception of the subject from – more or less immersive – VR technologies in the direction of approaches which might be expected to become readily available in practice and education and could be effective in actual design processes. This insight also brought about a shift in emphasis from realism per-se towards creating a sense of situatedness. The design representation system which was developed was intended to not just allow for one type of model view, but to afford an array of different views, from which the designer would be able to choose freely, depending on the phase and focus of design as well as personal preferences. A series of interface prototypes and support tools were developed especially and successively tested experimentally. For the intended final design driven experimental study, different virtual context models were considered. Eventually, an integral – purely fictitious – design ‘environment’ was constructed in the computer, so that the workings of the proposed system and its components would be tested systematically. A conscious choice was made for an in depth study, on a relatively modest scale, which would a certain amount of mutual involvement between designer and researcher, to confront the participants with the finer aspects of the proposed system in a relatively short time and to gather detailed data. A half dozen design professionals were invited to participate in a closely monitored experimental exercise. The results of this study therefore do not offer straightforward, indisputable facts, to be considered representative for the design community as a whole, but indicate that the working methods of the individual designers – when discovering aspects of the site, developing and presenting proposals and reflecting on the qualities of represented designs – tend to vary considerably. For this reason the interactive representation system proved to be of value. Participants could express different view preferences, with more or less realistic image modes being used in different phases of their design developments, with varying experiences of situatedness. Some of the design professionals participants were very appreciative of the system’s opportunities, others tended to be more ‘set in their ways’. The results of this experimental study indicate that there may particularly be opportunities for interface applications which are able to function interactively, offering individual designers – as well as others involved in evaluating design proposals – a variety of tools with which to approach specific design artefacts in their changing contexts. Virtual models can play not only an important role as a ‘reminder’ for the designer but also to other parties playing an active role in the design and implementation processes. Interactive environment models are not only promising as exploration tools for existing sites, but could be valuable to test the impact of a design on its location. This could be especially interesting if the site is difficult or impossible to visit or as yet a virtual construction. In addition such an approach might be beneficial for objective comparison and evaluation of design proposals in competitions and in education as well as in on-line collaborative design projects where the context is still in the process of being developed.
series	thesis:PhD
type	normal paper
email
more	http://www.bk.tudelft.nl/users/stelling/internet/
last changed	2005/03/02 22:40

_id	caadria2005_a_7c_a
id	caadria2005_a_7c_a
authors	Anandan Karunakaran
year	2005
title	Organisation of Pedestrian Movements: an Agent-Based Approach
doi	https://doi.org/10.52842/conf.caadria.2005.305
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 305-313
summary	Cities are becoming more complex in this digital era due to technological changes. Thinking of cities without such technological changes is equivalent to an embryonic state in the morphology of city growth, that is, the growth seems less advanced. So it is appropriate to think of the non digital city digitally. Urban design is one state which establishes the perfect relationship between the street, people and building. The relationship of the people with the building and street is becoming one of the key factors in architecture. It has been observed that the design of a city has been influenced by the pedestrian movement. Many cities prior to the industrial era were largely determined by the social interactions based on walking. Thus the pedestrians play a key role in the formation of the city. They are a very important component in any representation of transport movements. They generally terminate or initiate a chain of linked activities, and if observed carefully, a single pedestrian movement is meant to include various sub journeys from one location to another. In order to organize pedestrians, we need to understand the pedestrian movement system. Though there is a lot of development of urban models in this aspect, it is still in a nascent state in comparison with the digital advancement. Thus much research work is carried out which can be applied to any given environmental setting, and as a result urban designers can respond to the changing socio-cultural technologies.
series	CAADRIA
last changed	2022/06/07 07:54

_id	acadia05_156
id	acadia05_156
authors	Cabrinha, Mark
year	2005
title	From Bézier to NURBS: Integrating Material and Digital Techniques through a Plywood Shell
doi	https://doi.org/10.52842/conf.acadia.2005.156
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 156-169
summary	The development of digital fabrication has reintroduced material processes with digital processes. There has been much discussion about the tool and the objects of the tool, but little discussion of the implication of the material process on the digital process. A brief historical review on the development of computer numerical control and the origins of the Bézier curve reveals an instrumental fact: computer numerical controlled tools necessitated advancements in computational surfaces which eventually led to NURBS (Non-Uniform Rational B-Splines) surfaces. In other words, the origins of NURBS surfaces resides in its relation to material processes, rather than many current approaches that develop free form surfaces and then force the tool onto the material without regard to the material properties. From this historical and mathematical review, this project develops toward more intelligent construction methods based on the integration of NURBS differential geometry paired with material qualities and processes. Specifically, a digital technique of developing conceptual NURBS geometry into piecewise surface patches are then flattened based on the material thickness and density. From these flattened patches, a material technique is developed to intelligently remove material to allow the rigid flat material to re-develop into physical surface patches. The goal of this research is to develop digital and material techniques toward intelligent construction based on the correspondence between digitally driven surface and digitally driven material processes. The application of this technique as a rational and flexible system is to support the dynamic response of form and material toward such performative aspects as structure, daylight, ventilation, and thermal properties.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2005_603
id	sigradi2005_603
authors	Castañé, Dora; Claudio Deho, Adrián Barcesat, Carlos Tessier
year	2005
title	Urbamedia: the design of an integrated system of urban-building visualization and communication
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 603-608
summary	This paper presents the advancements of the Urbamedia project which was designed as part of a research program at the Center CAO (Creation computer assist), School of Architectural Design and Urbanism, University of Buenos Aires, which was led by the valued master and advisory professor Architect Arturo F. Montagu. This proposal of the city of Buenos Aires on the Mayo Avenue expands the original historical fragment presented between the following two referenced representative landmarks: The Two Congresses Square and the Mayo Square. It continues with the advancement of methodologies and techniques implemented in a system of “integrated visualization and communication” for the development of a VRML (Virtual Reality Modeling Language) 3D virtual non-immersive and interactive vision. It also incorporates the development of a “foundation of digitally integrated knowledge” with fragments of central areas from other surrounding cities as well as interfaced phenomenological situations. The application of digital VRML technology has allowed for thoroughly researching the processes through dynamic simulation of specific urban fragments (Mayo Avenue within Buenos Aires) and the cities that are also participating in the project. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ijac20053203
id	ijac20053203
authors	Norman, Frederick
year	2005
title	Digital to Analog: Exploring Digital Processes of Making
source	International Journal of Architectural Computing vol. 3 - no. 2, 191-202
summary	This focus this paper is the translation of a digital information model that defines an object's surface properties and its connection to that which is real or physical. This research, while early in its investigation, seeks to explore architecture and digital design as a material process. The direct connection to output devices such as computer-numerically controlled routers provide a unique opportunity for controlled variation and serial differentiation and seeks to exploit mass customization rather than standardization. Through a series of studies the process from design to machine file to finish product is explored. This connection to digitally driven fabrication equipment creates within the design process an opportunity to realize ones designs both digitally and materially.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	2005_415
id	2005_415
authors	Tramontano, Marcelo and Mônaco dos Santos, Denise
year	2005
title	Online_communities
doi	https://doi.org/10.52842/conf.ecaade.2005.415
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 415-423
summary	Research on contemporary habitation spaces is directly related to the study of the relationship between new media and everyday life. This paper presents ongoing in-depth research which intends to discuss these relationships in different ways on a conceptual basis. A collaborative multi-users interface is being specially designed, supported by different kinds of electronic equipment. Furthermore, the project’s objective is to analyze how these information and communication technologies are to be used, as well as their impact on poor communities. As a hypothesis, our intention is to verify if the access to information will be able to broaden social interactions and improve new services which have been set up, in order to guarantee a better quality of life. Beyond being a conceptual approach, the study intends to present and examine facts obtained from intervening in a poor district in São Paulo city, Brazil. Using an existing public telecenter as an access provider to the internet, individual TV-connected set-top boxes in 220 apartments in a local social housing complex are being installed, enabling users to communicate through a collaborative multiusers digital interface. Adding a virtual instance to a geographically-based community, the aim of the project is to provide new possibilities to improve dialogue and debates, to encourage more income and cultural activities. It also intends to evaluate the effects of the technological mediation of social relationships, both inside and outside the community, as well as within the physical urban space such as in the dwellings. The results of this study will be useful in defining public policies to be implemented by the Sao Paulo Local Government. The work is being sponsored by FAPESP, which is the Sao Paulo State Funding Agencie, but also by public institutions, private partners and universities. Researchers involved belong to complementary fields such as architecture, urbanism, computer sciences, social sciences, psychology and electronic engineering.
keywords	Virtual Communities, Collaborative Networks, Digital Inclusion
series	eCAADe
email
last changed	2022/06/07 07:57

_id	955b
id	955b
authors	Rafi, A
year	2005
title	Information and communication technology (ICT) and intelligent cities: A Malaysian experience
source	In Mao-Lin, C. (Ed.), CAAD talk 4: Insights of digital cities (pp. 229-248), Taipei, Taiwan: Archidata
summary	This paper reports on Malaysian’s experience in suggesting and maintaining two cybercities (i.e. Putrajaya and Cyberjaya) or Intelligent Cities. The advantage of the convergence of technology has been implemented at national level as a means to increase human participation and to prosper in the Digital Age, in their daily life, business, education and other urban activities. It starts with an overview of ‘High-tech Corridors’ in Asia countries namely Philippines, Thailand, South Korea, and Singapore and its impact to these countries. The foundation of this study presents the criteria of Intelligent Community (IC) that makes a city intelligent without excluding the value of the citizen quality of life, culture and religion by associating with the Information and Communications Technology (ICT). We introduce and present www.i-Putra.com.my, a portal of digital soft city of Malaysia’s new administrative Capital, Putrajaya. This national project is funded by Putrajaya Holdings Sdn. Bhd. Malaysia and was originally developed by the Multimedia University before finally executed by I-Design Sdn. Bhd. It is designed to be an interactive channel to provide the services for different level of target audiences of the civic and urban activities. The guiding principle for i-Putra.com.my portal is content, context, community and commerce in which they will be integrated with the city information such as residential, commercial, service and public areas. It is hoped that this paper gives an example of good intelligent city concepts through a clear vision and planning, effective management, implementation and sustainable approach.
keywords	intelligent city, intelligent community (IC), ICT, High-tech Corridors
series	book
type	normal paper
email
last changed	2007/09/13 03:39

_id	sigradi2005_478
id	sigradi2005_478
authors	Abdelhameed, Wael
year	2005
title	Digital-Media Impact on the Decision-Making Capability of Architects
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 478-482
summary	The underlying assumption of the research is that media the representational environments of architects’ design thoughts, have impact on the way by which architects practice design and develop their design capabilities. This research aims at exploring the interrelationship between the media used by the architect and the development that might occur in the Decision-Making capability.The role of digital media in the architectural design process has become exploration and suggestion of what is being made, rather than, illustration of what has been already made. Depending on primary data (a global questionnaire) and secondary data (synthesis of the previous research), the results have substantiated the observation that there has been positive impact of digital media settings on the Decision-Making capability of architects. The analysis reveals some detailed findings, which provide a better understanding of the subject matter.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2005_b_5b_d
id	caadria2005_b_5b_d
authors	Andre Brown, Michael Knight, Martin Winchester
year	2005
title	Representation and Delivery of City Models
doi	https://doi.org/10.52842/conf.caadria.2005.344
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 344-352
summary	City modelling has a considerable range of potential applications and because of this, as a field of research has attracted a great deal of attention over recent years. Here we reflect on work already reported by the authors in this area, describe some more recent work on improving the system that had been developed and show an example of how city modelling is being applied in practice as a planning tool in the UK.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2006_paper25
id	ascaad2006_paper25
authors	Artopoulos, Giorgos; Stanislav Roudavski and Francois Penz
year	2006
title	Adaptive Generative Patterns: design and construction of Prague Biennale pavilion
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This paper describes an experimental practice-based research project that considered design process, implementation and construction of a pavilion built to be part of the Performative Space section of the International Biennale of Contemporary Art, Prague 2005. The project was conceptualized as a time-bound performative situation with a parasite-like relationship to its host environment. Its design has emerged through an innovative iterative process that utilized digital simulative and procedural techniques and was formed in response to place-specific behavioral challenges. This paper presents the project as an in-depth case-study of digital methods in design, mass customization and unified methods of production. In particular, it considers the use of Voronoi patterns for production of structural elements providing detail on programming and construction techniques in relationship to design aspirations and practical constraints.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	2005_163
id	2005_163
authors	Balakrishnan, Bimal, Kalisperis, Loukas N. and Muramoto, Katsuhiko
year	2005
title	Evaluating Workflow and Modeling Strategies of Pen Computing in the Beginning Architectural Design Studio
doi	https://doi.org/10.52842/conf.ecaade.2005.163
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 163-170
summary	This paper investigates the impact of Tablet PCs on the workflow in an undergraduate design studio. We examined how well the students adapted the Tablet PC into their day-to-day design work and evaluated the appropriateness of the Tablet PC as a common digital tool used in an architectural design studio. This research involved observation of student behavior during the semester and the conducting of a survey measuring various aspects of the students’ use of the computers. A more specific goal was to compare the effectiveness of the pen versus the mouse as input devices for a three-dimensional modeling task in terms of both task time and strategies. Our assumption was that a change in input mode would affect the strategies and the performance. The results of a within-subjects, repeated-measures experiment carried out to elicit differences in input devices are discussed.
keywords	Digital Design Education; Human-Computer Interaction; 3D Modeling; Pen Computing; Task Analysis
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2005_720
id	sigradi2005_720
authors	Bermudez, Julio; Jim Agutter
year	2005
title	Data Architecture Studio: Premises, Pedagogy, and Results
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 720-724
summary	Information Visualization (InfoVis) is the field devoted to the study of methods for displaying data in information-rich domains. Although most of the InfoVis solutions have been developed by scientists and engineers, artists and designers have began to bring in their expertise to advance the state of the art. The role that architects may play in this development could be substantial. Yet, participating in this new design frontier means to master skills and knowledge not necessarily covered by traditional architectural education. This paper presents a four-year effort devoted to develop such InfoVis curricula in an architectural context. The course encodes knowledge harvested over almost 10 year of InfoVis research bridging 5 disciplines and delivering many successful academic, technological, and commercial products. In particular, the class investigates the use of architecture as (1) a fundamental data organizational device and (2) a research method of examination, response, and communication for InfoVis problems.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_225
id	sigradi2005_225
authors	Bianchi, Alejandra S.
year	2005
title	Education and innovation: present and future of teacher’s practice in digital graphic
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 225-229
summary	This is a qualitative research about the “educative training process” of Digital Graphic students, in the Architectural Department of Nordeste University- Argentina. The specific aim is “to know in depth the elements that influence in the educative training process in digital graphics”, to guide the propose of new teaching strategies to make better the teaching- learning process. The studied universe includes two architecture -students groups that are coursing first and second year of the career, since 2004. The first analysis categories, allow us to find out the meaning that pupils give to the facts, to build the training process dialectic. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_253
id	2005_253
authors	Breen, Jack and Stellingwerff, Martijn
year	2005
title	Towards Ornamatics
doi	https://doi.org/10.52842/conf.ecaade.2005.253
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 253-260
summary	Computer aided modelling and drafting protocols – in combination with new production technologies – have contributed to wholly new ways of shaping building elements. Some examples of new techniques, which have recently become very successful in building production and in architectural design education, are: 3D Rapid Prototyping; 2,5D and 3D Milling and computer aided Shape Cutting (notably using laser and water jet modes). Such new approaches not only create new opportunities for traditional production processes (including physical modelling), they also offer new perspectives for design and manufacturing on the level of architectural components and connections. We foresee innovative approaches to building product design, with a renewed interest in expressive Ornamentation. A phenomenological development we would like to address using the concept of ‘Ornamatics’. This contribution explores the potentials of product design with a renewed focus on ornamentation, involving the active utilization of computer aided modelling and manufacturing techniques. The paper furthermore documents results and findings of a series of explorative studies carried out within an educational laboratory environment.
keywords	Design Driven Research; Computer Aided Fabrication; Aesthetics; Ornamentation; Education
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: