Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 556

Reformat results as: short short into frame detailed detailed into frame

_id	2005_647
id	2005_647
authors	Caldas, Luisa G.
year	2005
title	Three-Dimensional Shape Generation of Low-Energy Architectural Solutions using Pareto Genetic Algorithms
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 647-654
doi	https://doi.org/10.52842/conf.ecaade.2005.647
summary	This paper extends on a previous work on the application of a Generative Design System [GDS] to the evolution, in a computational environment, of three-dimensional architectural solutions that are energy-efficient and adapted to the climatic environment where they are located. The GDS combines a well-known building energy simulation software [DOE2.1E] with search procedures based on Genetic Algorithms and on Pareto optimization techniques, successfully allowing to tackle complex multi-objective problems. In the experiments described, architectural solutions based on a simplified layout were generated in response to two often-conflicting requirements: improving the use of daylighting in the space, while controlling the amount of energy loss through the building fabric. The choice of a cold climate like Chicago provided an adequate framework for studying the role of these opposing forces in architectural form generation. Analysis of results shows that building characteristics that originate successful solutions extend further than the building envelope. Issues of massing, aspect ratio, surface-to-volume ratio, orientation, and others, emerge from the analysis of solutions generated by the GDS, playing a significant role in dictating whether a given architectural form will prove adapted to its climatic and energy requirements. Results suggest that the questions raised by the exploration of form generation driven by environmental concerns are complex, deserving the pursuit of further experiments, in order to better understand the interaction of variables that the evolutionary process congregates.
keywords	Generative Design System, Genetic Algorithms, Evolutionary Architecture, Artificial Intelligence in Design, Building Energy Simulation, Bioclimatic Architecture, Environmental Design.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2012_003
id	ascaad2012_003
authors	Elseragy, Ahmed
year	2012
title	Creative Design Between Representation and Simulation
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary	Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed	2012/05/15 20:46

_id	caadria2005_a_7c_f
id	caadria2005_a_7c_f
authors	M.N.H. Siddique, Qazi A. Mowla, Mohammad A. Al Masum
year	2005
title	VIRTUALITY IN ARCHITECTURE: A DESIGN METAPHOR
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 342-350
doi	https://doi.org/10.52842/conf.caadria.2005.342
summary	Traditionally, architecture in its design process employs physical matter, requires physical presence and relies on real world environment using conventional methods of 2D depictions such as paper and pen or 3D representations such as physical models and communicates design ideas in verbal or text-based form. The conventional design process, for example an interior design, a residential house, a commercial complex or even urban design projects, follows the same hierarchy of activities. Efforts are made to the satisfaction of both parties to give the ideas of a physical shape through sketches, drafts and models which may take weeks even months. Finally the project gets its final shape in a working drawing, 3D visualisation or model making. This process is time consuming and somewhat redundant. In recent years technology has offered architects a new tool - the virtual environment. Architects use virtual environment increasingly as device of communication and presentation of design intensions. Virtual environment enables users to interact in real-time with design but unfortunately have not been used widely in the process of design development. The aim of this paper is to investigates the relationship between present design process and the emerging technology of virtual reality, establish a relationship between the two and its influence on architecture to form a new translated design process and communication, an interface between architect and client.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	cf2005_2_13_167
id	cf2005_2_13_167
authors	VANDE MOERE Andrew
year	2005
title	Form Follows Data
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 31-40
summary	This paper analyzes the relationships between creative design and the field of information visualization, with a focus on historical connotations and newest developments that show great potential. Empirical evidence shows how designers often employ information visualization as a creative concept capable of significantly determining the design outcome, and vice versa, how information visualization can be enhanced by exploring interdisciplinary concepts, such as design cognition, user engagement, aesthetics and art. Several symbiotic dependencies are explained and demonstrated, including the first conceptual cyberspace and information architecture definitions. This paper will argue that information visualization should be enriched with the principles of creative design and art, to develop valuable data representations that address the emotional experience and engagement of users, instead of solely focusing on task effectiveness metrics. Finally, several interdisciplinary movements are described that show great symbiotic potential in the near future, especially in the fields of ambient information displays, informative art and location-based information awareness.
keywords	information visualization, aesthetics, design, information architecture
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	2005_787
id	2005_787
authors	Veikos, Cathrine
year	2005
title	The Post-Medium Condition
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 787-794
doi	https://doi.org/10.52842/conf.ecaade.2005.787
summary	Theorists in art, architecture and visual media have described the digital world as a world of mediumlessness and proclaimed that the medium of a work, once the ontological determinant for the classification of the arts, is rendered meaningless by recent technological and cultural developments (Krauss, 2000; Negroponte, 1995; Manovich, 2001). Although indebted to specific media-based techniques and their attendant ideologies, software removes the material reality of techniques to an immaterial condition where the effects of material operations are reproduced abstractly. This paper asserts that a productive approach for digital design can be found in the acknowledgement that the importance of the digital format is not that it de-materializes media, but that it allows for the maximum intermingling of media. A re-conceptualization of media follows from this, defined now as, a set of conventions derived from the material conditions of a given technical support, conventions out of which to develop a form of expressiveness that can be both projective and mnemonic (Krauss, 2000). The paper will focus on the identification of these conventions towards the development of new forms of expressiveness in architecture. Further demonstration of the intermingling of materially-based conventions is carried out in the paper through a comparative analysis of contemporary works of art and architecture, taking installation art as a particular example. A new design approach based on the maximum intermingling of media takes account of integrative strategies towards the digital and the material and sees them as inextricably linked. In the digital “medium” different sets of conventions derived from different material conditions transfer their informational assets producing fully formed, material-digital ingenuity.
keywords	Expanded Architecture, Art Practice, Material, Information, ParametricTechniques, Evolutionary Logics
series	eCAADe
email
last changed	2022/06/07 07:58

_id	2005_279
id	2005_279
authors	Walz, Steffen P., Schoch, Odilo, Ochsendorf, Mathias and Spindler, Torsten
year	2005
title	Serious Fun: Pervasive game design as a CAAD teaching and research method
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 279-286
doi	https://doi.org/10.52842/conf.ecaade.2005.279
summary	Today and in the future, architectural students must be prepared for designing both physical and adaptive, computer-integrated spaces. The question is: How do we easily and effectively convey architecturally relevant theories and practices of pervasive computing in teaching? In this paper, we present a didactic model that has proved to be a possible answer. During a semester long design class, we supervised an interdisciplinary group of architecture and computer science students who teamworked on an early so called serious pervasive game prototype, entitled “ETHGame”. The class culminated in a two week compact phase and a presentation before ETH representatives involved in e-learning projects. The resulting interactive prototype takes advantage of our campus’s extensive wireless local area network infrastructure, allowing for user positioning and location based learning, servicing, and peer-to-peer communication. The game mutates the whole of the ETH Zurich campus into a knowledge space, issuing position dependent and position relevant questions to players. The ETHGame forces participants to engage with a given space in the form of a quiz and rewards them for collaborating both face-to-face and facelessly. The game helps them build a collective academic and space aware identity whilst being immersed in a sentient environment. Thus, in this paper we are introducing serious pervasive game design as a novel design research and teaching paradigm for CAAD, as well as a e-learning design strategy.
keywords	Pervasive Computing; Pervasive Game Design; Serious Games; LocationBased Learning; Knowledge Space
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2005_811
id	sigradi2005_811
authors	Amundarain, Iñaki Martín; Víctor Aperribay ; Jesús Mª Alonso ; José Javier San Martín José Ignacio San Martín ; José Mª Arrieta ; Igor Treviño
year	2005
title	Advanced techniques of design in support to medical science: Application to implantological treatments.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 811-817
summary	At the present time the importance of the image of people plays a key role. Therefore many people who leave these standards wish to change their aesthetic face one, in occasions to look for characteristics that respond to the modern beauty, and in others, to try to solve a medical problem. In the work that is exposed here, the use of the present technological tools of design appears, like support to the scientific development that it makes possible an effectively learn more express and to the students of Odontolgy, improvement of the quality of the treatments of the doctors and help the patients to see beforehand the final results of the operations, avoiding to see disagreeable images. So, the support of the surgical procedures on systems CAD/CAM is making possible the enormous development of medical science, such form that are every time better, more comfortable to learn and are less traumatic for them. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_000
id	sigradi2005_000
authors	Angulo, Antonieta and Vásquez de Velasco, Guillermo (eds.)
year	2005
title	SiGradi2005: Vision and Visualization
source	Proceedings of the 9th Iberoamerican Congress of Digital Graphics Graphics / ISBN 978-1-59975-306-5] Lima (Perú) 21-23 november 2005, 826 p.
summary	Paradoxically, one of the most difficult but enjoyable things we do is to imagine. To open the eyes of our mind and see what no one else can see. We see images of things that are yet to be and through the same skill we devise ways in which to make them happen. We design the future in the form of environments, graphics, products, films, and a growing range of new media. Our ability to develop a vision and to visualize it is a gift that we are called to cultivate and put to good use. We have been privileged with a great responsibility. In the process of developing a vision and communicating that vision to others, we “visualize”. Visualization can be a very private experience in which we are alone with mental images that help us shape our vision. In other instances visualization can be a component of mass communication. Visualization can be a means or can be an end. It can be a small architectural sketch on a paper napkin or a mega-graphic covering a high-rise building, an airplane or a ship. In every case, the relationship between vision and visualization is a mutually supportive articulation of what our eyes and our minds can see. Our vision of the role of computers in the art and science of visualization is in constant development. Computer visualization can support an intimate dialog between a designer and his/her vision. It can translate and communicate that vision to a larger audience and in the hands of a new-media artist it can actually constitute his/her vision. The 9th Annual Conference of SIGraDI (Ibero American Society for Computer Graphics) will explore our collective vision on the future of digital visualization and digital media in Environmental Design, Product Design, Graphic Design, Cinematography, New Media, and Art. Authors are invited to share their research work with a focus on how it contributes to shape a collective understanding of the past, awareness of the present, and vision of the future in our multiple disciplines.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_438
id	sigradi2005_438
authors	Bessone, Miriam; Ricardo Pérez Miró, Isabel Molinas
year	2005
title	Digital visualization and new intellectual associations among language - music - architecture
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 438-443
summary	Throughout history, architecture has transposed contributions bound to structuralist focus or to musical composition. This is from linguistic and music respectively. New visualization systems show the possibility to give transpositions a new meaning, form the potentialities of hypermedia; locking for new projects parameters. This papers will show experimental workshop results developed within CI+D 2000 “New speeches and design process”. They study links and explore our work interrelating word – music and image. These processes are developed by people coming from literature, visual arts, music, and architecture areas. Lastly, the first results will be shown. Since parameters were transposed from music, by using NURBS forms, space prefiguration is tried out. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia05_226
id	acadia05_226
authors	Biloria, N., Oosterhuis, K. and Aalbers, C.
year	2005
title	Design Informatics
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 226-235
doi	https://doi.org/10.52842/conf.acadia.2005.226
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for envisaging complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This design-research approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. The hence extorted ‘point cloud’ configuration serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed script-routines, iteratively run calculations to generate steel-wireframes, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct hence enabling timely and effective construction of the conceptualized form.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ijac20053102
id	ijac20053102
authors	Burry, Jane; Felicetti, Peter; Tang, Jiwu; Burry, Mark; Xie, Mike
year	2005
title	Dynamical structural modeling A collaborative design exploration
source	International Journal of Architectural Computing vol. 3 - no. 1, 27-42
summary	This study is based on a generative performative modeling approach that engages architects and structural engineers in close dialogue. We focus on knowledge shared between engineers and architects to apply the Finite Element Analysis based structural design technique Evolutionary Structural Optimization [ESO] as a way to understand or corroborate the performance factors that are significant in determining architectural form. ESO is very close conceptually to the dynamical system of matter and forces of growth itself. It has parallels both mathematical and metaphorical with natural evolution and morphogenesis so it has been poignant to apply the approach to a formal architectural case study in which the generative influence of these processes is inherent.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	acadia05_156
id	acadia05_156
authors	Cabrinha, Mark
year	2005
title	From Bézier to NURBS: Integrating Material and Digital Techniques through a Plywood Shell
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 156-169
doi	https://doi.org/10.52842/conf.acadia.2005.156
summary	The development of digital fabrication has reintroduced material processes with digital processes. There has been much discussion about the tool and the objects of the tool, but little discussion of the implication of the material process on the digital process. A brief historical review on the development of computer numerical control and the origins of the Bézier curve reveals an instrumental fact: computer numerical controlled tools necessitated advancements in computational surfaces which eventually led to NURBS (Non-Uniform Rational B-Splines) surfaces. In other words, the origins of NURBS surfaces resides in its relation to material processes, rather than many current approaches that develop free form surfaces and then force the tool onto the material without regard to the material properties. From this historical and mathematical review, this project develops toward more intelligent construction methods based on the integration of NURBS differential geometry paired with material qualities and processes. Specifically, a digital technique of developing conceptual NURBS geometry into piecewise surface patches are then flattened based on the material thickness and density. From these flattened patches, a material technique is developed to intelligently remove material to allow the rigid flat material to re-develop into physical surface patches. The goal of this research is to develop digital and material techniques toward intelligent construction based on the correspondence between digitally driven surface and digitally driven material processes. The application of this technique as a rational and flexible system is to support the dynamic response of form and material toward such performative aspects as structure, daylight, ventilation, and thermal properties.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	2005_599
id	2005_599
authors	Couceiro, Mauro
year	2005
title	Architecture and Biological Analogies
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 599-606
doi	https://doi.org/10.52842/conf.ecaade.2005.599
summary	The study described in this paper evolves within the larger context of a research aimed at inquiring into analogies between architecture and nature, and more specifically between architecture and biology. Biology is a recursive source of architectural inspiration due to the tight relationship between form and function, the natural balance of forces and the corresponding geometric solutions found in living beings. Roughly, one can classify historical analogies between architecture and biology into two main categories. The first tries to mimic biological forms and the second biological processes. The specific goal of the described study is to find how new technologies can redefine and support the process of constructing such analogies. It uses as a case study a tower project designed by the architect Manuel Gausa (ACTAR, Barcelona) called Tornado Tower because of its complex shape inspired in the frozen form of a tornado. Due to the geometric irregularities of the tower, Gausa’s team had difficulties in designing it, especially because solving the structural problems required constant redrawing. This paper describes the first part of the study which primary goal was to conceive a parametric program that encoded the overall shape of the Tornado Tower. The idea was to use the program to simplify the drawing process. This required a mathematical study of spirals and helices which are at the conceptual basis of the external structure and shape of the tower. However, the program encodes not only the shape of Gausa’s tower, but also the shapes of other buildings with conceptual similarities. Such class of shapes is very recurrent in nature with different scales and with different utilities. Therefore, one can argue that the program makes a mathematical connection between a given natural class of shapes and architecture. The second part of the study will be devoted to extending the program with a genetic algorithm with the goal of guiding the generation of solutions taking into account their structural fitness. This way, the analogy with genetic procedures will be emphasized by the study of the evolution of forms and its limits of feasibility. In summary, the bionic shape analogy is made by the generation of mimetic natural forms and a genetic process analogy starts with the parametric treatment of shape based on code manipulations. At the end the program will establish an analogy between architecture and biology both terms of form and process.
keywords	Genetics; Evolutionary Systems; Parametric Design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia05_114
id	acadia05_114
authors	Due Schmidt, Anne Marie
year	2005
title	Navigating towards digital tectonic tools
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 114-127
doi	https://doi.org/10.52842/conf.acadia.2005.114
summary	The computer holds a great potential to break down the barriers between architecture and the technical aspects relating to architecture, thus supporting innovative architecture with an inner correspondence between form and technique. While the differing values in architecture and technique can seem like opposites, the term tectonics deals with creating a meaningful relationship between the two. The aim of this paper is to investigate what a digital tectonic tool could be and what relationship with technology it should represent. An understanding of this relationship can help us not only to understand the conflicts in architecture and the building industry but also bring us further into a discussion of how architecture can use digital tools. The investigation is carried out firstly by approaching the subject theoretically through the term tectonics and by setting up a model of the values a tectonic tool should encompass. Secondly the ability and validity of the model are shown by applying it to a case study of Jørn Utzon’s work on Minor Hall in Sydney Opera House - for the sake of exemplification the technical field focused on in this paper is room acoustics. Thirdly the relationship between the model of tectonics and the case will be compared and lastly a discussion about the characteristics of a tectonic tool and its implications on digital tectonic tools will be carried out.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2005_547
id	2005_547
authors	Elger, Dietrich and Russell, Peter
year	2005
title	Crisis? What Crisis?
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 547-556
doi	https://doi.org/10.52842/conf.ecaade.2005.547
summary	The paper describes the current situation concerning career opportunities in the field of architecture in developed western countries. Several aspects that are almost universal mark this situation. Firstly, there are too many architects chasing traditional work in competition with structural (civil) engineers. This is not surprising in consideration of the fact, that the architectural education industry produces far too many new architects for the economy to absorb. In Germany, the number is almost three times too many. Secondly, the needs of the building industry have changed over the past twenty years so that the skills that architects want to offer are not necessarily those that are sought. Lastly, the constant specialisation of work has continued unabated. Architects, as generalists, have idly watched their areas of expertise be usurped from neighbouring fields like civil and structural engineering The reasons for this crisis are manifold. In the schools of architecture, the discussions often deal with form or formal arguments, which, in fact, have little or no relevance to the building industry. This position was tenable so long as the clients were willing to accept formal arguments in order to receive buildings of high quality or current social relevance (i.e. current architectural fashion). With the dual aspects of globalisation and a shift to maintaining building stocks rather than producing new buildings, the tolerance for “architectural” discussions has been reduced even further. Indeed, the monetary pressures overwhelm almost all other aspects, including so-called green issues. What is more, most of the monetary issues are time based. Time represents, perhaps, the largest pressure in any current planning project. The clients expect expedient, accurate and inexpensive solutions. If architects are not able to produce these, the clients will (and do) go elsewhere. The authors argue that there remain serious problems to be solved for architects and the metier in general. Ever cheaper, ever faster and ever encompassing information technologies offer the architectural community a chance to turn recent trends on their head. By using information technologies to their full potential, architects can reassert themselves as the coordinators of building information and processes. Simply put, this means less photorealistic rendering and more databases, which may be unappealing for those architects who have positioned themselves as “designers” and are able to talk long on form, but short on cost or logistics. Nonetheless, the situation is not lost, so long as architects are able to recognise what is desired from the point of view of the client and what is desired from the point of view of the architect. It is not a question of one or the other. Architects must be able to offer innovative design solutions that not only address the fiscal, legal and programmatic constraints, but also push the boundaries at to the position of architecture in the community at large. For educators, it must be made clear that the real potential architects possess is their encompassing knowledge of the building process including their expertise concerning questions of architectural form, function, history and art. Precisely while they are generalists are architects invaluable in a sea of specialists. The biggest hurdle to asserting this in the past has been the control of the vast amounts of information. This is no longer a problem and also no longer an excuse. In the education of architects, it must be made clear that their role dictates sovereignty over architectural information. Architectural Information Management is a necessary skill alongside the more traditional architectural skills. A brief outlook as to how this might come about is detailed in the paper. The authors propose didactic steps to achieve this. Primarily, the education of computer supported planning should not simply end with a series of lectures or seminars, but culminate in integrated Design Studios (which including Design-Build scenarios).
keywords	Architectural Information Mangement, Computer Supported Design Studios, CSCW
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia05_184
id	acadia05_184
authors	Fineout, Matthew G.
year	2005
title	The Tower of Babel: Bridging Diverse Languages with Information Technologies
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 184-191
doi	https://doi.org/10.52842/conf.acadia.2005.184
summary	New digital tools or information technologies are providing the means for architects to realize unprecedented architectural creations. Unfortunately, the promise these technologies hold is far from their potential expression in the built physical environment. A contributing cause to this disjunctive state is the multiplicity of languages and knowledge sets employed by the various team members or actors engaged in a building project. From the cost models of the owners to the shop drawings of the fabricators, each actor views the project in terms specific to their individual discipline. In order to successfully engage the building process, these new technologies must account for this condition and develop means in which to span across traditional boundaries. This paper will examine the disjointed and fractured nature of the building project and identify opportunities for the deployment of information technologies to bridge boundaries, ultimately providing for and delivering architectural projects of unparalleled precedence. Specific aspects inherent to these technologies will be examined to understand where their application may benefit the building process. The key attributes this paper will focus on include: visualization tools, centralized database, cross discipline platform tools and novel forms of information representation. A case study of an architectural project will serve as the means in which to study the successful implementation of these attributes and their resulting impact on the design process and building project. This study will demonstrate how information technologies can be implemented within the multifaceted framework of conventional building projects to yield a project of unprecedented form.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	sigradi2005_799
id	sigradi2005_799
authors	Gonzalo, Guillermo E.; Sara L. Ledesma, V.M. Nota, C.F. Martínez, G.I. Quiñones y G. Márquez Vega.
year	2005
title	Methodology for the bioclimatic design: computer sustain for election of guidelines and strategies.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 799-805
summary	After numerous studies and practical of use, field and laboratory measurements, carried out among the years 1994 and 1999, we arrived to the elaboration and presentation of a methodology for the bioclimatic design and energetically sustainable that already takes two books publications. With the support of more than 600 figures that facilitate the understanding of the concepts explained in the books and 26 computer software and databases, that are attached to the second book, the work is facilitated so that designers of buildings that have not been never in contact with a certain climate, or that they don’t have sufficiently assumed by means of the observation of the particularities of a certain climatic situation, to understand the form in that the climate influence their design, condition or determine the design solutions and averge strategies that will choose when carrying out an architecture work. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	cf2005_1_53_133
id	cf2005_1_53_133
authors	HERR Christiane M. and KVAN Thomas
year	2005
title	Using Cellular Automata to Generate High-Density Building Form
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 249-258
summary	This paper presents an investigation into the use of cellular automata systems for the design of high-density architecture for Asian cities. In this architectural context, urban form is shaped by architectural solutions that are developed in a copy-and-paste manner. To this background, cellular automata are introduced and discussed with respect to the specific potential of cellular systems to support architectural design addressing large projects as well as cost and speed constraints. Previous applications of cellular automata to architectural design have been conceptual and are typically limited by the rigidity of classical automata systems as adopted from other fields. This paper examines the generative design potential of cellular automata by applying them to the re-modelling of an existing architectural project. From this application it is concluded that cellular automata systems for architectural design can benefit from challenging and adapting classic cellular automata features, such as uniform volumetric high-resolution models and globally consistent rule execution. A demonstration example is used to illustrate that dynamic, state-dependent geometries can support an architectural design process.
keywords	cellular automata, high density architecture, urban morphology, generative design
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	6b43
id	6b43
authors	Heylighen A, Casaer M, Neuckermans H
year	2005
title	SHARING-IN-ACTION. HOW DESIGNERS CAN SHARE INSIGHTS WITHOUT KNOWING
source	P. Kommers & P. Isaías (eds), Web Based Communities 2005, Proceedings of the IADIS International Conference on Web-Based Communities 2005, Algarve (Portugal), Feb 2005, pp.238-245 (ISBN 972-99353-7-8)
summary	In architecture, design ideas are developed as much through interaction as by individuals in isolation. This awareness inspired the development of a Dynamic Architectural Memory On-line, an interactive platform to share ideas, knowledge and insights in the form of concrete building projects among designers in different contexts and at different levels of expertise. Interaction with various user groups revealed this platform to suffer from at least two thresholds. First of all, making projects available to other platform users takes time, effort, and specific skills. Secondly, designers tend to sense a psychological threshold to share their ideas and insights with others. In trying to tackle both thresholds, this paper proposes to conceive the platform as an associative network of projects, and develops ideas about how the relationships in this network can be determined and updated by exploiting the insights implicitly available in the project documentation and user (inter)actions. In the long run, this should allow the platform to learn from all designers using the platform, including those who do not release information on their own projects, and to apply the lessons learned to continuously enhance its performance.
keywords	web-based communities, self-organization, data mining, design experience
series	other
type	normal paper
email
last changed	2005/04/01 13:25

For more results click below: