Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	2005_010
id	2005_010
authors	Aish, Robert
year	2005
title	From Intuition to Precision
doi	https://doi.org/10.52842/conf.ecaade.2005.010
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 10-14
summary	Design has been described as making inspire decisions with incomplete information. True, we may use prior knowledge, we may even think we understand the causalites involved, but what really matters is exploration: of new forms, of new materials, and speculation about the response to the resulting effects. Essentially, this exploration has its own dynamics, involving intuition and spontaneity, and without which there is no design. But of course we all know that this is not the whole story. Design is different to 'craft'; to directly 'making' or 'doing'. It necessarily has to be predictive in order to anticipate what the consequence of the 'making' or 'doing' will be. Therefore we inevitably have to counter balance our intuition with a well developed sense of premeditation. We have to be able to reason about future events, about the consequence of something that has not yet being made. There is always going to be an advantage if this reasoning can be achieved with a degree of precision. So how can we progress from intuition to precision? What abstractions can we use to represent, externalize and test the concepts involved? How can we augment the cognitive processes? How can we record the progression of ideas? And, how do we know when we have arrived? Design has a symbiotic relationship with geometry. There are many design issues that are independent of any specific configurations. We might call these “pre-geometric” issues. And having arrived at a particular configuration, there may be many material interpretations of the same geometry. We might call these “post-geometric” issues. But geometry is central to design, and without appropriate geometric understanding, the resulting design will be limited. Geometry has two distinct components, one is a formal descriptive system and the other is a process of subjective evaluation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_287
id	2005_287
authors	Achten, Henri and Reymen, Isabelle
year	2005
title	Structured Reflection as a Means to Deepen Understanding of CAAD
doi	https://doi.org/10.52842/conf.ecaade.2005.287
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 287-294
summary	In this paper we outline a strategy of structured reflection to improve reflection by students in a course on the implication of CAAD, design theory, and design methodology. Earlier editions of the course showed that students often did not evolve their learning beyond a checklist level. Reflection is an important mechanism to improve learning from design situations. After a consideration of the main approaches to design reflection, we take up Schön’s notion of reflection and provide support for structured reflection in CAAD education, based on earlier experiences with structured question lists in a civil engineering course. Findings after the first year’s run show a deeper level of reflection on a more elaborate level.
keywords	Structured Reflection, CAAD, Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_547
id	2005_547
authors	Elger, Dietrich and Russell, Peter
year	2005
title	Crisis? What Crisis?
doi	https://doi.org/10.52842/conf.ecaade.2005.547
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 547-556
summary	The paper describes the current situation concerning career opportunities in the field of architecture in developed western countries. Several aspects that are almost universal mark this situation. Firstly, there are too many architects chasing traditional work in competition with structural (civil) engineers. This is not surprising in consideration of the fact, that the architectural education industry produces far too many new architects for the economy to absorb. In Germany, the number is almost three times too many. Secondly, the needs of the building industry have changed over the past twenty years so that the skills that architects want to offer are not necessarily those that are sought. Lastly, the constant specialisation of work has continued unabated. Architects, as generalists, have idly watched their areas of expertise be usurped from neighbouring fields like civil and structural engineering The reasons for this crisis are manifold. In the schools of architecture, the discussions often deal with form or formal arguments, which, in fact, have little or no relevance to the building industry. This position was tenable so long as the clients were willing to accept formal arguments in order to receive buildings of high quality or current social relevance (i.e. current architectural fashion). With the dual aspects of globalisation and a shift to maintaining building stocks rather than producing new buildings, the tolerance for “architectural” discussions has been reduced even further. Indeed, the monetary pressures overwhelm almost all other aspects, including so-called green issues. What is more, most of the monetary issues are time based. Time represents, perhaps, the largest pressure in any current planning project. The clients expect expedient, accurate and inexpensive solutions. If architects are not able to produce these, the clients will (and do) go elsewhere. The authors argue that there remain serious problems to be solved for architects and the metier in general. Ever cheaper, ever faster and ever encompassing information technologies offer the architectural community a chance to turn recent trends on their head. By using information technologies to their full potential, architects can reassert themselves as the coordinators of building information and processes. Simply put, this means less photorealistic rendering and more databases, which may be unappealing for those architects who have positioned themselves as “designers” and are able to talk long on form, but short on cost or logistics. Nonetheless, the situation is not lost, so long as architects are able to recognise what is desired from the point of view of the client and what is desired from the point of view of the architect. It is not a question of one or the other. Architects must be able to offer innovative design solutions that not only address the fiscal, legal and programmatic constraints, but also push the boundaries at to the position of architecture in the community at large. For educators, it must be made clear that the real potential architects possess is their encompassing knowledge of the building process including their expertise concerning questions of architectural form, function, history and art. Precisely while they are generalists are architects invaluable in a sea of specialists. The biggest hurdle to asserting this in the past has been the control of the vast amounts of information. This is no longer a problem and also no longer an excuse. In the education of architects, it must be made clear that their role dictates sovereignty over architectural information. Architectural Information Management is a necessary skill alongside the more traditional architectural skills. A brief outlook as to how this might come about is detailed in the paper. The authors propose didactic steps to achieve this. Primarily, the education of computer supported planning should not simply end with a series of lectures or seminars, but culminate in integrated Design Studios (which including Design-Build scenarios).
keywords	Architectural Information Mangement, Computer Supported Design Studios, CSCW
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2005_797
id	2005_797
authors	Petzold, Frank and Donath, Dirk
year	2005
title	Tailor-made: Adapting and Extending CA(A)Dsystems
doi	https://doi.org/10.52842/conf.ecaade.2005.797
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 797-803
summary	CA(A)D systems are nowadays a part of everyday architectural practice and have completely replaced drawing with pen and T-square. The standard functions of such systems are (usually) sufficient for the everyday needs of practical work. The question is: can CA(A)D systems be adapted to improve work efficiency for specific users or applications such as those of the architect? Most current CA(A)D systems already provide some level of support for individual adaptation however these are rarely exploited by the end users. This paper discusses the teaching of skills for adapting and extending existing CA(A)D systems in current architectural education. In addition to the teaching of programming and operational skills, the course also examines the critical examination of CA(A)D systems and the formulation of user requirements (analysis), the search for existing solutions, functions or extensions (research) and the technical adaptation or extension of the system (software development). Using examples from current coursework, the paper illustrates both process and results of teaching practice.
keywords	Digital Design Education, 2D Representation, Design Process, 3D Modeling, Education in CAAD
series	eCAADe
email
last changed	2022/06/07 08:00

_id	2005_665
id	2005_665
authors	Brito, Tiago, Fonseca, Manuel J. and Jorge, Joaquim A.
year	2005
title	DecoSketch – Towards Calligraphic Approaches to Interior Design
doi	https://doi.org/10.52842/conf.ecaade.2005.665
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 665-670
summary	Computer-Aided Design tools have long played an important role in architecture design. However, we need to go beyond direct manipulation to devise new tools that will expedite the interior design and decoration. Indeed, conventional CAD systems, while providing ever increasing functionality, do not provide equal support to the drafting and drawing tasks. This makes even the simplest drawings a complicated endeavor. Draftspeople struggle with different concepts that those learnt from their earlier days in school and have to think long and hard to translate familiar sequences of operations to commands which require navigating a dense jungle of menus. The term calligraphic interfaces was coined by us to designate a large family of applications organized around the drawing paradigm, using a digital stylus and a tablet-and-screen combination as seen most recently in Tablet PCs®. Using these, users can enter drawings in a natural manner, largely evocative of drafting techniques that were perfected for pencil-and-paper media. This paper presents a simple calligraphic interface to explore interior design literally from the ground up. The Decosketch application is a modeling and visualization tool structured around 2 _D architectural plants. Its purpose is to help architects or customers easily creating and navigating through house designs starting from the floorplan and moving to their three-dimensional representation. Moreover, both 2D and 3D representations can be independently edited, providing a natural interface that tries to adhere to well-known representations and idioms used by architects when drafting using pencil and paper.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_269
id	2005_269
authors	Caldas, Luisa and Duarte, José
year	2005
title	Fabricating Ceramic Covers
doi	https://doi.org/10.52842/conf.ecaade.2005.269
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 269-276
summary	This paper describes a studio experiment developed with the aim of exploring the design and fabrication of innovative roof systems based on ceramic tiles using digital technologies. History is rich in examples of the use of ceramic roof tiles since the ancient world. Today’s systems derive from such ancient systems and fall into several basic categories depending on the form of the tiles and how they interlock. These systems present acceptable functional performances due to centuries of refinement, but as they have suffered little formal evolution in recent centuries, to respond to modern needs they require complex layering and assemblies. Recent technological evolution has emphasized the optimization of the tile production process in terms of time saving and cost reduction, and the improvement of product quality in terms of material homogeneity and durability. Little attention has been paid to the tile form and the roof system as a whole, including the assembly process. As a result, despite the variety and performance of existing designs, they are often perceived as outdated by architects who refuse to use them following a stylistic trend in architectural design towards primary forms and flat roofs. The challenge of the experiment was to take advantage of digital design and fabrication technology to conceive systems with improved performance and contemporary designs. The hope was that this could lead architects to consider integrating roof tiles systems in their architectural proposals. Results yielded five different roof systems. These systems are innovative from a formal viewpoint both at the tile and roof level. In addition, they are easy to assemble and possess better thermal and water-proofing performance. Digital technologies were determinant to enable students to design the complex shape of the tiles, to manipulate them into assemblies, and to assess the shape of the roofs, as well as their thermal and structural performance in some cases.
keywords	Design Education; Rapid Prototyping; Collaboration; Ceramics; Innovation; Tiles
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_647
id	2005_647
authors	Caldas, Luisa G.
year	2005
title	Three-Dimensional Shape Generation of Low-Energy Architectural Solutions using Pareto Genetic Algorithms
doi	https://doi.org/10.52842/conf.ecaade.2005.647
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 647-654
summary	This paper extends on a previous work on the application of a Generative Design System [GDS] to the evolution, in a computational environment, of three-dimensional architectural solutions that are energy-efficient and adapted to the climatic environment where they are located. The GDS combines a well-known building energy simulation software [DOE2.1E] with search procedures based on Genetic Algorithms and on Pareto optimization techniques, successfully allowing to tackle complex multi-objective problems. In the experiments described, architectural solutions based on a simplified layout were generated in response to two often-conflicting requirements: improving the use of daylighting in the space, while controlling the amount of energy loss through the building fabric. The choice of a cold climate like Chicago provided an adequate framework for studying the role of these opposing forces in architectural form generation. Analysis of results shows that building characteristics that originate successful solutions extend further than the building envelope. Issues of massing, aspect ratio, surface-to-volume ratio, orientation, and others, emerge from the analysis of solutions generated by the GDS, playing a significant role in dictating whether a given architectural form will prove adapted to its climatic and energy requirements. Results suggest that the questions raised by the exploration of form generation driven by environmental concerns are complex, deserving the pursuit of further experiments, in order to better understand the interaction of variables that the evolutionary process congregates.
keywords	Generative Design System, Genetic Algorithms, Evolutionary Architecture, Artificial Intelligence in Design, Building Energy Simulation, Bioclimatic Architecture, Environmental Design.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2005_089
id	sigradi2005_089
authors	Caldi, Leonardo
year	2005
title	Ethnomethodology and experience design
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 89-94
summary	Through a reading of the work of David Carson, this article seeks to shed light on certain contributions from ethnomethodology to experience design. Looking form better ways of communicating, Carson – himself a member of the skater and surfer communities with whom he wanted to communicate – advanced a new manner of doing graphic design, effectively challenging established paradigms of visual communication. In our view, Carson made use of ethnomethodology in a special way, based on intuition. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_211
id	2005_211
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2005
title	The Quest for the Holy Grail – Holistic Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2005.211
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 211-218
summary	Architectural design, due to phenomena such as globalisation of the construction process, delocalisation of professional and industrial activities, spread of new construction materials and components, and the challenges of environmental sustainability, has become so comlex that traditional ways of managing the process are no longer sufficient. What is more, architectural works are required to be ever more performing and integrated - holistic. The paradigm of collaborative design is gaining ground as a way of dealing with these problems. Various process/ product models have been proposed over the years, making more or less use of advanced tools. In this field this study proposes a model in which operators from various cultural contexts are each supported by Intelligent Assistants (agents). The model simulates the design of works of architecture to the best professional practice. Exchange of information and knowledge between the operators is essential to enhance the design process. From this follows the need to interface not just data, but also meanings. This article shows how to improve communications between different applications, used by different operators, so as to integrate information and knowledge, whether formalised or not, in a project managed collaboratively by means of XML.
keywords	Collaborative Design; Design Process Model; Distributed Knowledge Bases; Semantic Interfaces; aecXML
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2005_501
id	2005_501
authors	Celani, Gabriela, Pupo, Regiane, Mendes, Gelly and Pinheiro, Érica
year	2005
title	Generative Design Systems for Housing
doi	https://doi.org/10.52842/conf.ecaade.2005.501
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 501-506
summary	The present paper describes an undergoing research that aims at developing a generative design computer implementation with an outside-in approach, OIDS. The system will allow developing and visualizing context-based housing development designs. This approach will include both natural characteristics of the site and the existing neighboring buildings. It is argued that certain common urban design practices are the result of a simplification due to difficulties in dealing with the irregularities of the natural environment, which often requires the use of time-consuming methods. The computer-based application will provide tools for dealing with such difficulties, allowing designers to describe their own design rules. In an initial phase of the project, a tool that can subdivide irregular land parcels into equally sized areas has been developed. In further stages, other environmental variables will be addressed, such as solar aspect and prevalent wind directions. Eventually, even the designs of interior layouts should result from exterior forces. The resulting generative system is expected to facilitate and encourage the use of a more organic approach to building siting and design, bringing about the important discussion about which should be the main forces in the generation of the built environment.
keywords	Generative Design; Context-Based Design; Housing Design; Building Siting; Urban Space Simulation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2005_715
id	2005_715
authors	Chitchian, Davood and Bekkering, Henco
year	2005
title	A Decision Support Tool for Decision Makers
doi	https://doi.org/10.52842/conf.ecaade.2005.715
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 715-721
summary	Many decisions in a multidisciplinary and interdisciplinary process, as an intelligent activity, are too complex for decision makers to make choices based solely on instinct. The complexity stems from this fact that such activities cannot be defined precisely. Also satisfying goals depend on achievement of several interrelated tasks which cannot be solved simultaneously. Our decision support tool uses a mathematical application so called Analytical Hierarchy Process as a decision making aid. The developed tool provides a powerful and flexible mean for tackling the complex decision process into a simple concept of hierarchy, which incorporates factors influencing the decision alternatives in a systematic way.
keywords	Decision Support System; AHP; Eigenvalue; Construction Industry
series	eCAADe
email
last changed	2022/06/07 07:55

_id	1375
id	1375
authors	Coyne, Richard
year	2005
title	Cornucopia Limited: Design and Dissent on the Internet
source	MIT Press: Cambridge, Mass
summary	The Internet provides a remarkable demonstration of the persistence of the gift in contemporary commerce. Net enthusiasts seem prepared to donate much to the common good. This generous spirit ought to strike resonances with the culture of design, which generally promotes a creative ethos of generosity, conspicuous display, and exuberance. But the cornucopia of the gift economy is offset by net culture's recent leanings towards consumerism. This book challenges the supposed gift society of the Internet, and supplants the gift by a more compelling metaphor, enjoyed in certain quarters of contemporary design, that of theft, rule breaking, and transgression. The relationship between design thinking and the network economy is characterized by the reckless spirit of the trickster, the crosser of boundaries, and the malingerer in the hybrid and uncertain condition of the threshold. The book thus presents a designer's view of the network economy, drawing on insights from design theorists, economists, philosophers and cultural theorists. It provides valuable insights for theorists of human-computer interaction, architects, designers, and those interested in registering the source and direction of the impulse to create, innovate, and design. The book examines five metaphors: household, machine, game, gift and threshold. Economic theory is grounded in the household. The romantics and Marx claimed that labor is dominated by the rampant machinery of capitalism. The computer game represents a potent exemplar of new media economics. The gift is presented as precursor to commercial exchange. Coyne subjects each metaphor to scrutiny in terms of how it deals with the threshold, in other words as it is dissected by the cynic or manipulated by the trickster, and other liminal dwellers in the network economy. 'What’s shaping the culture of the Internet? This turns out to be a surprisingly tricky question, one that Richard Coyne explores with verve and erudition.' --Albert Borgmann, author of Holding On to Reality
keywords	design computing digital media economics threshold trickster e-commerce
series	book
type	normal paper
email
last changed	2006/05/27 18:21

_id	2005_037
id	2005_037
authors	Côté, Pierre, Léglise, Michel and Estévez, Daniel
year	2005
title	Virtual Architecture as Representation for Creative Design Process - Through a Collaborative eDesign Studio
doi	https://doi.org/10.52842/conf.ecaade.2005.037
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 37-45
summary	Using Virtual Architecture (VA) as a general scheme for representations to sustain the reflection activities involved in the design process can help students to initiate creative design ideas. Because of its implicit abstract nature, VA can be used, to represent original ideas or processes, or well-known architectural theories to articulate design ideas. Furthermore, VA as a mean of expression, turn out to be a source of inspiration for students who perceive it as medium with very few limits with which to develop, explore and express their design intuitions. A recent collaborative edesign studio experience is reported to illustrate the benefit observed. Using three examples out of ten student projects, we show how designs and design process have been characterized by those virtual representations. In fall semester 2004, the edesign studio took place between the Schools of Architecture of Toulouse and Université Laval in Québec. VA was both an academic and a studio topic at Laval while the other school students had a traditional design task to tackle, namely the rehabilitation of Chapou University Residences for students in Toulouse. Students from both schools composed each edesign team. In addition, three common architectural themes were web-documented and introduced to both classes: room, as defined by Louis Kahn: “a space which knows what it wants to be is a room”; color, as an architectural medium in dialectic with structure; and body-space relationships, as articulated by Gilles Deleuze and its projection to cyberspace. From the edesign studio results, we are arguing that virtual architecture should be looked at not only as new domain to be investigated by architects and taught in academic studios but also as a new medium of design to develop and explore design intuitions through virtual representations.
keywords	Virtual Architecture; Virtual Representations; Medium; eDesign; Design by Collaboration
series	eCAADe
email
last changed	2022/06/07 07:56

_id	2005_483
id	2005_483
authors	Datta, Sambit
year	2005
title	The Generation of Superstructure Geometry in Latina Temples: A Hybrid Approach
doi	https://doi.org/10.52842/conf.ecaade.2005.483
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 483-488
summary	The Nâgara tradition of temple building created a rich corpus of Latina (single-spired) temples spread across Northern India between the fifth and thirteenth centuries. Computing methods offer a distinct methodology for reconstructing the genesis and evolution of geometry in this tradition over time. This paper reports a hybrid technique, comprising three distinct computations for recovering and explaining the geometry of temples. The application of the technique enables scholars to bring together fragments of evidence, construe “best-fit” strategies and unearth implicit or hidden relationships. The advantage of this approach is that changes in assumptions and testing of geometric alternatives can be easily simulated from multiple sources of information, such as texts, sacred diagrams and individual temples.
keywords	Generative Design: 2D Representation; 3D Modeling; Visualization; Constraint Based Design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2005_467
id	2005_467
authors	Guéna, François
year	2005
title	Assisting 3D Modeling from Documents
doi	https://doi.org/10.52842/conf.ecaade.2005.467
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 467-476
summary	This paper presents research in computer modeling that ARIAM team of the school of architecture of Paris La Villette has been developing for several years. One of the aims of this research group is to develop computer systems that assist architects in modeling existing buildings or monuments from heterogeneous documents or data as drawings plans, sections, photos, measures taken on site etc. In spite of advances in computer recognition it’s a long way to have a system that could automatically recognize, from any bitmap document or photo, relevant architectural objects and automatically build the model these documents represent. However, if we could define a knowledge base about a particular domain, it would be possible to develop a system that could interpret specific documents that represent some kind of building or monuments. But, even in such limited domain, it is difficult to build an exhaustive knowledge base and user-interactions are generally required. We argue that a user could mark relevant information on the documents and thus facilitate the process of interpreting. The system we propose has three components: a graphical user interaction tool, an analyzer of documents and user interactions, and a generative tool that produces the required model. As an illustration, the paper presents a system we have developed which assists an architect in modeling a 3D mesh of gothic vaults for a finite elements analysis.
keywords	3D Modeling; Restitution; Knowledge Base System; Meshing; Gothic Vaults
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2005_139
id	2005_139
authors	Ham, Jeremy J.
year	2005
title	Music and Architecture: from Digital Composition to Physical Artifact
doi	https://doi.org/10.52842/conf.ecaade.2005.139
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 139-146
summary	This paper addresses how relationships between music and architecture can be explored within the design studio through a series of digital games and projects and culminating in the actual construction of small-scale architecture. Through the examination of music and architecture, students are provided with valuable opportunities for authentic learning opportunities relating to digital mastery, teamwork, tectonics, the role of digital technologies in the design and construction process and the translation of an architectural concept relating to composition to a physical artifact.
keywords	Music, Architecture, Real-Scale Modeling, the Design Studio
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2005_197
id	2005_197
authors	Hsieh, Chih-Wen
year	2005
title	A Networked Sketching Environment for Supporting Collective Creativity
doi	https://doi.org/10.52842/conf.ecaade.2005.197
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 197-204
summary	In the early conceptual design, individual designers often make extensive use of sketches to explore design problems. Moreover, within the collaborative design sessions, designers communicate and discuss with each other by sharing their temporary sketches. These private design artifacts are used to externalize ideas and share them with other designers in order to facilitate the performance of design sessions. During such social interaction performance, some abstraction behaviors behind social activities like collective creativity are synchronized. However, the existent tele-communication tools proposed for separated design groups, slightly hold back the activities of collective creativity. It makes designers dedicated just in the table discussion, and negatively influenced on collective creativity sharing. Thus, some private design artifacts became isolated in tele-communicative environments. In order to respect this, we propose an approach that uses the notion of Digital Backchannel to realize the sub-channel communications. In this paper, we also present the implementation of a working prototype of groupware application. Finally, we discussed some points from our studies.
keywords	CSCD: CSCW; Natural User Interface; Digital-Backchannel; Collective Creativity
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2005_399
id	2005_399
authors	Johansson, Mikael and Roupé, Mattias
year	2005
title	From CAD to VR – Implementations for Urban Planning and Building Design
doi	https://doi.org/10.52842/conf.ecaade.2005.399
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 399-405
summary	At present time, three-dimensional objects are often represented with 2D-data in urban planning and building design. In order to get all the involved parties to fully understand a certain project, this may not be enough. More and more projects therefore take use of the Virtual Reality (VR) technique as a complement to traditional 2D drawings and sketches. All the involved parties can then share a common frame of reference for all discussions regarding a certain project. Unfortunately, the technique is not yet adapted to fit the current building design process. In this paper, we present a solution for semi-automatic generation of a VR-model based on 3D CAD information and aerial photos obtained from the City Planning Authorities in Sweden. The data is imported to support real-time editing of terrain, roads and buildings. We also present a framework for importing 3D-models created in Autodesk Revit which enables a seamless integration of modern 3D CAD and VR-models. The features are implemented in a software developed at Chalmers Visualization studio (Gothenburg, Sweden) and technical details about terrain handling and speed-up techniques will be given.
keywords	Virtual Reality; 3D City modeling; Urban planning; Terrain; Visualization
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia05_048
id	acadia05_048
authors	Katodrytis, George
year	2005
title	Poiesis and Autopoiesis in Architecture
doi	https://doi.org/10.52842/conf.acadia.2005.048
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 48-57
summary	The use of digital technology in architecture has proven to be more assertive than originally thought: it has reconditioned the nature of the design process, and established new processes and techniques of fabrication. Recent applications in digital technology show inquisitiveness in the contentious subject Genetic Algorithms. This new architectural process is characterized by two main shifts: from poiesis (or poetry) to autopoiesis, and from authenticity to mimesis. Since evolutionary simulations give rise to new forms rather than design them, architects should now be both artists and operators of both Inventive and Systematic design. Inventive design: The digital media should bring about poiesis (poetry). Digital spaces reveal and visualize the unconscious desires of urban spaces, bringing forth new dreamscapes, mysterious and surreal. This implies a Freudian spatial unconscious, which can be subjected to analysis and interpretation. The tools of digital dreaming, meanwhile, have opened a window to the ‘urban unconscious’. Systematic Design: Digital media should bring about an autopoiesis. This approach calls into question traditional methods of architectural design that replace the hierarchical processes of production known as “cause and effect,” and propose a design process where the architect becomes a constructor of formal systems. Will the evolutionary simulation replace design? Is metric space dead? The new algorithmic evolutionary conditions give architecture an autopoiesis, similar to biological dynamics. Paradoxically, the new emerging process is more insightful. The emphasis of the exploration is on morphological complexity. Architecture, through “machine” fabrication, may become more responsive, rigorous and poetic.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	2005_671
id	2005_671
authors	Kilian, Axel
year	2005
title	Design Innovation through Constraint Modeling
doi	https://doi.org/10.52842/conf.ecaade.2005.671
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 671-678
summary	This paper describes how constraint modeling can support design innovation. Furthermore, it lays out how constraints are employed in the construction and exploration of a model’s design space. The paper places this approach within the larger context of design exploration using computational and conceptual representations of design. Four general constraint types are identified and examples from several workshops and design studios are presented for each of the constraint types. The examples range from product design to structural design to fabrication issues in architecture. Based on a review of the literature the most common constraints are of geometric, topologic, functional, and quantitative type. Based on the case studies the paper describes how the different types of constraints can be used as design drivers and help in the exploration of solution space. In conclusion the paper identifies the addition of bi-directional properties to constraint modeling as the next challenge in improving the application of constraint modeling in design exploration. Furthermore, the paper demonstrates the necessity to develop better constraint models for cross domain design.
keywords	Design Exploration, Constraint Modeling, Parametric Modeling
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: