Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 99

Reformat results as: short short into frame detailed detailed into frame

_id	2005_467
id	2005_467
authors	Guéna, François
year	2005
title	Assisting 3D Modeling from Documents
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 467-476
doi	https://doi.org/10.52842/conf.ecaade.2005.467
summary	This paper presents research in computer modeling that ARIAM team of the school of architecture of Paris La Villette has been developing for several years. One of the aims of this research group is to develop computer systems that assist architects in modeling existing buildings or monuments from heterogeneous documents or data as drawings plans, sections, photos, measures taken on site etc. In spite of advances in computer recognition it’s a long way to have a system that could automatically recognize, from any bitmap document or photo, relevant architectural objects and automatically build the model these documents represent. However, if we could define a knowledge base about a particular domain, it would be possible to develop a system that could interpret specific documents that represent some kind of building or monuments. But, even in such limited domain, it is difficult to build an exhaustive knowledge base and user-interactions are generally required. We argue that a user could mark relevant information on the documents and thus facilitate the process of interpreting. The system we propose has three components: a graphical user interaction tool, an analyzer of documents and user interactions, and a generative tool that produces the required model. As an illustration, the paper presents a system we have developed which assists an architect in modeling a 3D mesh of gothic vaults for a finite elements analysis.
keywords	3D Modeling; Restitution; Knowledge Base System; Meshing; Gothic Vaults
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ijac20053102
id	ijac20053102
authors	Burry, Jane; Felicetti, Peter; Tang, Jiwu; Burry, Mark; Xie, Mike
year	2005
title	Dynamical structural modeling A collaborative design exploration
source	International Journal of Architectural Computing vol. 3 - no. 1, 27-42
summary	This study is based on a generative performative modeling approach that engages architects and structural engineers in close dialogue. We focus on knowledge shared between engineers and architects to apply the Finite Element Analysis based structural design technique Evolutionary Structural Optimization [ESO] as a way to understand or corroborate the performance factors that are significant in determining architectural form. ESO is very close conceptually to the dynamical system of matter and forces of growth itself. It has parallels both mathematical and metaphorical with natural evolution and morphogenesis so it has been poignant to apply the approach to a formal architectural case study in which the generative influence of these processes is inherent.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	2005_483
id	2005_483
authors	Datta, Sambit
year	2005
title	The Generation of Superstructure Geometry in Latina Temples: A Hybrid Approach
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 483-488
doi	https://doi.org/10.52842/conf.ecaade.2005.483
summary	The Nâgara tradition of temple building created a rich corpus of Latina (single-spired) temples spread across Northern India between the fifth and thirteenth centuries. Computing methods offer a distinct methodology for reconstructing the genesis and evolution of geometry in this tradition over time. This paper reports a hybrid technique, comprising three distinct computations for recovering and explaining the geometry of temples. The application of the technique enables scholars to bring together fragments of evidence, construe “best-fit” strategies and unearth implicit or hidden relationships. The advantage of this approach is that changes in assumptions and testing of geometric alternatives can be easily simulated from multiple sources of information, such as texts, sacred diagrams and individual temples.
keywords	Generative Design: 2D Representation; 3D Modeling; Visualization; Constraint Based Design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2005_687
id	2005_687
authors	Nir, Eyal and Capeluto Guedi
year	2005
title	Smart Cloud-of-Points Model: Point-based Digital Media and Tools for Architectural Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 687-694
doi	https://doi.org/10.52842/conf.ecaade.2005.687
summary	Abandoning the scale-model concept in favor of an abstract representation led us to the development of a digital design model based on point-clouds as design media. In this paper we examine the potential usage of point-clouds as design media. Extending the point-cloud model with a forth dimension represented as a numeric pointer to generative algorithms provides a parametric interface for the regeneration and alteration of the extended point-cloud model referred to as “Smart Cloud of Points”.
keywords	Point-Clouds; Parametric Design; Generative Modeling
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ac12
id	ac12
authors	Akin, Ö.; R. Krishnamurti, K.P. Lam (eds)
year	2005
title	Generative CAD Systems
source	Singapore: Carnegie Mellon University, 2005
summary	In the new millennium, Computer Aided Design has emerged as the most potent technological innovation in design. As BIM promises to integrate design tasks vertically and horizontally through graceful data exchange, new frontiers appear to researchers and practitioners as potential watershed events of the next decade. Generative approaches, a venerable engagement of computational design, is emerging as one of these. The proceedings of the Generative CAD Symposium held at Carnegie Mellon University, both summarizes the three decades of work in this area and reveals the beginnings of research and application expected in this domain. After all, will designers be able to effortlessly and intelligently generate potential design solutions that respond to appropriate design requirements and designers’ intentions?
series	book
type	normal paper
email
more	http://www.andrew.cmu.edu/user/oa04/publications_books.html
last changed	2008/09/04 07:18

_id	ascaad2006_paper25
id	ascaad2006_paper25
authors	Artopoulos, Giorgos; Stanislav Roudavski and Francois Penz
year	2006
title	Adaptive Generative Patterns: design and construction of Prague Biennale pavilion
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This paper describes an experimental practice-based research project that considered design process, implementation and construction of a pavilion built to be part of the Performative Space section of the International Biennale of Contemporary Art, Prague 2005. The project was conceptualized as a time-bound performative situation with a parasite-like relationship to its host environment. Its design has emerged through an innovative iterative process that utilized digital simulative and procedural techniques and was formed in response to place-specific behavioral challenges. This paper presents the project as an in-depth case-study of digital methods in design, mass customization and unified methods of production. In particular, it considers the use of Voronoi patterns for production of structural elements providing detail on programming and construction techniques in relationship to design aspirations and practical constraints.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2005_763
id	2005_763
authors	Beilharz, Kirsty
year	2005
title	Architecture as the Computer Interface: 4D Gestural Interaction with Socio-Spatial Sonification
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 763-770
doi	https://doi.org/10.52842/conf.ecaade.2005.763
summary	Architecture today extends far beyond designing building shells and material, peripheral boundaries. Arguably, it has always been, and shifts increasingly in contemporary environments towards, designing space and interaction with space. Hence, the role of the designer includes integration of computing in architecture through ambient display and non-tactile interaction. This paper explores a framework in which the architecture is the computer interface to information sonification. (Sonification is automatically generated representation of information using sound). The examples in this paper are Emergent Energies, demonstrating a socio-spatially responsive generative design in a sensate environment enabled by pressure mats; Sensor-Cow using wireless gesture controllers to sonify motion; and Sonic Kung Fu which is an interactive sound sculpture facilitated by video colour-tracking. The method in this paper connects current information sonification methodologies with gesture controller capabilities to complete a cycle in which gestural, non-tactile control permutes and interacts with automatically-generated information sonification. Gestural pervasive computing negotiates space and computer interaction without conventional interfaces (keyboard/mouse) thus freeing the user to monitor or display information with full mobility, without fixed or expensive devices. Integral computing, a blurring of human-machine boundaries and embedding communication infrastructure, ambient display and interaction in the fabric of architecture are the objectives of this re-thinking.
keywords	Interactive Sonification, Gesture Controllers, Responsive Spaces, SpatialSound
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_647
id	2005_647
authors	Caldas, Luisa G.
year	2005
title	Three-Dimensional Shape Generation of Low-Energy Architectural Solutions using Pareto Genetic Algorithms
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 647-654
doi	https://doi.org/10.52842/conf.ecaade.2005.647
summary	This paper extends on a previous work on the application of a Generative Design System [GDS] to the evolution, in a computational environment, of three-dimensional architectural solutions that are energy-efficient and adapted to the climatic environment where they are located. The GDS combines a well-known building energy simulation software [DOE2.1E] with search procedures based on Genetic Algorithms and on Pareto optimization techniques, successfully allowing to tackle complex multi-objective problems. In the experiments described, architectural solutions based on a simplified layout were generated in response to two often-conflicting requirements: improving the use of daylighting in the space, while controlling the amount of energy loss through the building fabric. The choice of a cold climate like Chicago provided an adequate framework for studying the role of these opposing forces in architectural form generation. Analysis of results shows that building characteristics that originate successful solutions extend further than the building envelope. Issues of massing, aspect ratio, surface-to-volume ratio, orientation, and others, emerge from the analysis of solutions generated by the GDS, playing a significant role in dictating whether a given architectural form will prove adapted to its climatic and energy requirements. Results suggest that the questions raised by the exploration of form generation driven by environmental concerns are complex, deserving the pursuit of further experiments, in order to better understand the interaction of variables that the evolutionary process congregates.
keywords	Generative Design System, Genetic Algorithms, Evolutionary Architecture, Artificial Intelligence in Design, Building Energy Simulation, Bioclimatic Architecture, Environmental Design.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2005_1_54_91
id	cf2005_1_54_91
authors	CANEPARO Luca, MASALA Elena and ROBIGLIO Matteo
year	2005
title	Dynamic Generative Modelling System for Urban and Regional Design
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 259-268
summary	This paper introduces a dynamic generative modelling system for urban and regional design. Through dynamic modelling the system evolves in time according to the interactions of the planners, decision-makers and citizens. On the basis of several synchronous and/or asynchronous user interactions, models are dynamically generated at run time. The models are built by defining the data (datasets) and the actions to perform on that data (tasks). The system reads and correlates data at urban and regional scale from various authorities to generate dynamic datasets. Tasks are especially powerful when they integrate generative procedures in a hierarchical structure. This allows us to model urban and regional dynamics through the interaction of tasks at micro- and macro-scale. Tasks can also implement either Cellular Automata or software agents. We examine the system application to a case project: the simulation of micro- and macro-dynamics in an Alpine valley, with specific challenges to fit competitive and sustainable growth in a landscape quality perspective. The simulation in spatial and temporal dimensions of regional data provided us with the elements to study the territorial evolution over the next twenty years. Four strategies gave as many scenarios highlighting the results of specific policies.
keywords	large-scale modelling, participatory design, GIS, software agent, datascape
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2005_501
id	2005_501
authors	Celani, Gabriela, Pupo, Regiane, Mendes, Gelly and Pinheiro, Érica
year	2005
title	Generative Design Systems for Housing
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 501-506
doi	https://doi.org/10.52842/conf.ecaade.2005.501
summary	The present paper describes an undergoing research that aims at developing a generative design computer implementation with an outside-in approach, OIDS. The system will allow developing and visualizing context-based housing development designs. This approach will include both natural characteristics of the site and the existing neighboring buildings. It is argued that certain common urban design practices are the result of a simplification due to difficulties in dealing with the irregularities of the natural environment, which often requires the use of time-consuming methods. The computer-based application will provide tools for dealing with such difficulties, allowing designers to describe their own design rules. In an initial phase of the project, a tool that can subdivide irregular land parcels into equally sized areas has been developed. In further stages, other environmental variables will be addressed, such as solar aspect and prevalent wind directions. Eventually, even the designs of interior layouts should result from exterior forces. The resulting generative system is expected to facilitate and encourage the use of a more organic approach to building siting and design, bringing about the important discussion about which should be the main forces in the generation of the built environment.
keywords	Generative Design; Context-Based Design; Housing Design; Building Siting; Urban Space Simulation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2005_2_32_203
id	cf2005_2_32_203
authors	CHASE Scott and AHMAD Sumbul
year	2005
title	Grammar Transformations: Using Composite Grammars to Understand Hybridity in Design
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 89-98
summary	Hybrid designs are those that develop from multiple sources. This paper presents the methodology of composite grammars, developed by merging multiple grammars, for the analysis of hybrid designs. The methodology is discussed with an example from Islamic architecture, which is known to have developed by borrowing from various sources. The methodology is seen to be useful for the analysis of the evolution of historic architecture, as well as for the development of new languages of designs.
keywords	shape grammars, generative design, historical analysis, Islamic architecture, hybridity
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	9c37
id	9c37
authors	Coates P, Derix C, Krakhofer S and Karanouh A
year	2005
title	Generating Architectural Spatial Configurations: two approaches using voronoi tessellations and particle systems
source	Proceedings of the Generative Arts conference, Milan, 2005
summary	It was one of the primary goals of the original Master’s programme in Computing and design at UEL in 1991 that we should work towards defining morphological generative processes for the conceptual design of architectural objects. These two papers offer a range of techniques which have been developed by two of this years MSc students (04-05) which show that we are getting close to this. The approaches range from computational geometric approaches (3d parametrics and voronoi diagrams) to emergent spatial organisation using agent based modelling. In many cases the resultant geometry is defined to the point where it can be transferred to advanced evaluation and fabrication systems, thus making this work sufficiently developed to begin to form a useful part in practical design processes.
keywords	morphology, computational geometry, particle systems, physical simulation, voronoi diagrams
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:39

_id	bc88
id	bc88
authors	Coates P, Derix C, Lau T, Parvin T and Puusepp R
year	2005
title	Topological Approximations for Spatial Representations
source	Proceedings of the Generative Arts conference, Milan, 2005
summary	Marshall McLuhan once said in his book Understanding Media that ‘Environments are invisible. Their ground rules evade easy perception.’ Evasive perception leads to fuzzy representations as shown through Kevin Lynch’s mental maps and the Situationists’ psycho-geographies. Eventually, spatial representations have to be described through abstractions based on some embedded rules of environmental interaction. These rules and methods of abstraction serve to understand cognition of space. The Centre for Evolutionary Computing in Architecture (CECA) at the University of East London has focused for the last 5 years on methods of cognitive spatial descriptions, based largely on either behavioural patterns or topological machines. The former being agent based, the latter neural network based. This year’s selection of student work constitutes a combination of cognitive agents + perceptive networks, and comprises three theses.
keywords	spatial cognition, neural networks, spatial perception, agent modelling
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:46

_id	6547
id	6547
authors	Coates P, Derix C, Lau T, Parvin T and Puusepp R
year	2005
title	Topological Approximations for Spatial Representations
source	Proceedings of the Generative Arts conference, Milan, 2005
summary	Marshall McLuhan once said in his book Understanding Media that ‘Environments are invisible. Their ground rules evade easy perception.’ Evasive perception leads to fuzzy representations as shown through Kevin Lynch’s mental maps and the Situationists’ psycho-geographies. Eventually, spatial representations have to be described through abstractions based on some embedded rules of environmental interaction. These rules and methods of abstraction serve to understand cognition of space. The Centre for Evolutionary Computing in Architecture (CECA) at the University of East London has focused for the last 5 years on methods of cognitive spatial descriptions, based largely on either behavioural patterns or topological machines. The former being agent based, the latter neural network based. This year’s selection of student work constitutes a combination of cognitive agents + perceptive networks, and comprises three theses.
keywords	spatial cognition, neural networks, spatial perception, agent modelling
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 21:09

_id	2005_623
id	2005_623
authors	Colakoglu, Birgul and Dionyan, Saro
year	2005
title	A Parametric Form Generator - ConGen
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 623-628
doi	https://doi.org/10.52842/conf.ecaade.2005.623
summary	This paper introduces a generative design tool for the early design phases. The tool is a prototype plug-in for 3D studio max, based on 3dmax script language. This plug-in generates form alternatives with symbolic representations. Designer sets max and min size values and positional relation rules for different sub-parts of the whole form. After the generation process designers can apply transformation modifiers and materials built in 3D Studio Max to the picked alternative. And get possible 3D form solutions that meet with the constraints of the design problem.
keywords	Generative Design Tools, 3DS Max
series	eCAADe
email
last changed	2022/06/07 07:56

_id	2005_607
id	2005_607
authors	Coppola, C., Calabrese, A., Iazzetta, A., Mele, F. and Talamo, O.
year	2005
title	The Transformation’s Control and Development
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 607-614
doi	https://doi.org/10.52842/conf.ecaade.2005.607
summary	The study of DNA of artifact and the development leading to its use in the field of industrial production of a single piece is now a common feature in the syllabus of the degree in Industrial Design at Faculty of Architecture “Luigi Vanvitelli” of SUN. The Generative Design Laboratory is where this process is carried out and includes the PROGEOR project for Generative Jewels Design. The experience acquired in the Generative Design Laboratory has developed along the lines of THE SINGLE PIECE, a product which combines the uniqueness of a handcrafted artefact with mass production methods. The development of project control technologies and also production technologies enables real-life experimentation of these hypotheses to be conducted.
keywords	Generative Model Design, Ontology, Agents
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	cf2005_1_51_122
id	cf2005_1_51_122
authors	FISCHER Thomas
year	2005
title	Generation of Apparently Irregular Truss Structures
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 229-238
summary	While cheaper mass-customisation technologies are becoming available, architectural design strives for ever more complex and less regular forms. The increasing costs associated with this tendency are difficult to control. Key factors contributing to this cost increase are non-uniform building components. Focusing on space frame construction, this paper examines the possibility of creating apparently irregular structures from relatively small sets of identical parts. Starting with an examination of the cost implications of irregular truss construction, a case study of the Beijing National Swim Center's space frame system and the conflicting natures of bottom-up and top-down generative logic in this context is presented. The paper concludes with the description of the development of a truss system that incorporates various design variables that increase visual irregularity. Learning from the past, this new system draws its basic logic from classic space frame principles but applies present-day computational logic to achieve new aesthetic effects and structural possibilities.
keywords	apparent irregularity, truss structures, prefabrication, generative design
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2005_107
id	2005_107
authors	Fricker, Pia, Ochsendorf, Mathias and Strehlke, Kai
year	2005
title	GENERATIVE INTERFACES AND SCENARIOS - INTERACTION IN INTELLIGENT ARCHITECTURE
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 107-113
doi	https://doi.org/10.52842/conf.ecaade.2005.107
summary	New media and modern building automation have a strong impact on contemporary architecture. So far one could regard built architecture as static. These new technologies introduce a dynamic impulse to architecture. The objective of our research and teaching work is to demonstrate the impact of innovative systems on architecture in daily usage while providing building automation, multimedia integration and facility management services in intelligent networked buildings. These technologies, as described in this paper are integrated in our second year course for students of Architecture. By designing an interactive graphical interface for the lab they were asked to create a spatial scenario as a self running Flash animation. Thus real space is merged with virtual reality.
keywords	CAAD Curriculum, Human-Computer Interaction, Web-Based Design, Building Automation, Generative Graphical Interfaces
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:50

For more results click below: