CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

_id 2005_237
id 2005_237
authors Schink, Claus-Jürgen, König, Holger and Krines, Manfred
year 2005
title The “BASYS”-house - From a Research Project to Practice - a house in a day
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 237-243
doi https://doi.org/10.52842/conf.ecaade.2005.237
summary From 2000 to 2002 a building system was developed within an applied research project for creating individual planned, but widely prefabricated building- elements consisting of “Brettstapelholz”. These are massive wood elements, fabricated by a CNC-machine. Two years later the results were transferred to the building industry. Most of the developed innovations had been adapted, the virtual enterprise worked together spatially separated via a common internet platform. The building elements developed by the architect were used. Although working properly, the complete integration of the CAD/CAM chain hadn’t been completely adapted. The house was shown at the “Bau”-exhibition in Munich. The following day it was mounted 350 km far from Munich and finished at the same day. Overall, it took only one day to mount the house, from the bottom to the roof. The article will show the building system and discuss the experiences gained by transferring research to industry.
keywords Multidisciplinary Design for Sustainability, CAD-CAM, Massive Wood Construction, Industrial Production of Buildings, Sustainable Construction, Low-eMission Buildings, Virtual Enterprise, Integral Planning Process
series eCAADe
email
last changed 2022/06/07 07:57

_id cf2005_2_53_169
id cf2005_2_53_169
authors VAN LEEUWEN Jos, JESSURUN Joran and JANSEN Glenco
year 2005
title Searching with Experience
source Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 203-214
summary This paper describes the motivation and development of a new algorithm for ranking web pages. This development aims to enable the implementation of a search engine that can provide highly personalised results to queries. It was initiated by a request from the Dutch CAD industry, but has generic potential for the development of web search engines. The paper describes the algorithm, its position in relation with existing algorithms, and its potential drawbacks and advantages.
keywords search engine, page ranking, product information, construction supply chain, machine learning
series CAAD Futures
email
last changed 2005/05/05 07:06

_id sigradi2012_30
id sigradi2012_30
authors Angeluzzi, Gustavo; Hanns, Daniela Kutschat
year 2012
title Um levantamento de requisitos gerais para o desenvolvimento e posicionamento de DOOTERS – um aplicativo lúdico de listas de tarefas para iPhone [A survey of general requirements for developing and positioning DOOTERS - a to-do list application for iPhone]
source SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 191-195
summary DOOTERS is a to-do list application for iPhone which entertains and motivates the user to get things done. It was developed based on requirements obtained trough: 1. the study of several personal information organizing methods (Covey, 1989; Allen, 2005; Foster, 2006); 2. answers to a task lists user focused questionnaire; 3. observation of to-do list users while creating lists and organizing tasks; 4. comparison of digital and non-digital task list media (paper, computer and mobile device); 5. analysis of profiles, behaviors and to-do list applications for iPhone. In this paper, the authors present the process of obtaining requirements for developing and positioning DOOTERS.
keywords information and interface design, requirements, to-do list application, iPhone, DOOTERS
series SIGRADI
email
last changed 2016/03/10 09:47

_id a8b4
authors Bridges, A.H.
year 1997
title Implications of the Internet for the construction industry
source Automation in Construction 6 (1) (1997) pp. 45-49
summary This paper is an adaptation of a section of the Building IT 2005 multimedia CD-ROM (Building IT 2005, Construction IT Forum, Cambridge, 1995). The paper discusses the implications of network technology for the construction industry. Introductory material about the Internet (and links to interesting resources) is included in the publication cited and a much more extensive guide is available in A.H. Bridges, The Construction Net, E. & FN Spon, London 1996.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id sigradi2005_778
id sigradi2005_778
authors Chiarella, Mauro
year 2005
title DATABASE 3D. Of the new form to the data processing
source SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 778-782
summary The search by new architectural forms with digital media loses interest when its results become foreseeable and repetitive in the growth of the large cities. At present, the interest is greater by the processing and manipulation of digital databases as alternatives of the architectural project. The resultant architectures possess forms that contrast less but with greater diversity in their spatial relations. DATABASE 3D is presented like a formal proposal risked of investigation. The experiences of project explore the concepts of Collective Autor, digital database and Hipertexto. It accepts the construction of a diverse and complex reality conformed by fragmentary spatial systems from the adoption of the mosaic, collage, remix and the digital sampling. [Full paper in Spanish]
series SIGRADI
email
last changed 2016/03/10 09:48

_id caadria2006_597
id caadria2006_597
authors CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year 2006
title NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
source CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
doi https://doi.org/10.52842/conf.caadria.2006.x.r4i
summary In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series CAADRIA
email
last changed 2022/06/07 07:50

_id b3f6
authors Goodwin, G.
year 1997
title Software and hardware summary
source Automation in Construction 6 (1) (1997) pp. 29-31
summary With the rate of change accelerating in both technological development and in the spread of global markets, very few cost cutting businesses will survive in a value added marketplace. Information sharing over networks has a lot to offer the Industry by way of eliminating delays from the construction process and inventory from the Supply Chain. The most significant change by 2005 will be in networking and communications. Discovering design flaws at the design stage rather than when the building is in use must be very attractive to clients of the Construction Industry. Construction firms must have some sort of IT Strategy or clear view of how to exploit IT to support their businesses. Large companies need to act as coaches and mentors to smaller ones. The Industry cannot maximise its IT benefits unless all the players participate.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id 1fbd
authors Kelly, J.G., Aouad, G., Rezgui, Y.and Crofts, J.
year 1997
title Information systems developments in the UK construction industry
source Automation in Construction 6 (1) (1997) pp. 17-22
summary The paper is based on a synopsis of work completed in 1995 as part of the 'Building IT 2005' project in the UK (J.G. Kelly, Procurement information systems, Building IT 2005, Construction IT Forum, Cambridge, 1995). Selected current UK research is reported and a revised view of the future is offered on the basis of this new work.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id 6795
id 6795
authors KOUZELEAS Stelios
year 2005
title DEFINITION OF A METHOD OF LIMITS OF THE SIMPLIFICATION OF A HALL MODEL IN A CAD SYSTEM TO DIMINISH FALSIFICATION OF ACOUSTIC SIMULATION RESULTS
source International Congress eCAADe 2005 (Education and research in Computer Aided Architectural Design in Europe), subject : “Digital Desing : the quest for new paradigms”, ISBN 0-9541183-2-4, pp. 695-704, Technical University of Lisbon, Portugal, 21-24 September 2005
summary During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi-EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
series other
type normal paper
email
more http://www.civil.ist.utl.pt/ecaade05/
last changed 2005/10/25 12:19

_id 2005_695
id 2005_695
authors Kouzeleas, Stelios Th.
year 2005
title Definition of a Method of Limits of the Simplification of a Hall Model in a CAD System to Diminish Falsification of Acoustic Simulation Results
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 695-704
doi https://doi.org/10.52842/conf.ecaade.2005.695
summary During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi- EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
keywords Calculation Cad Program Integrated Development ; Design Process ; 3D Modeling ; Performance Simulation ; Acoustic Simulation Results
series eCAADe
email
last changed 2022/06/07 07:52

_id ijac20053307
id ijac20053307
authors Ozel, Filiz
year 2005
title Confluence of Building Information for Design, Construction and Management of Buildings
source International Journal of Architectural Computing vol. 3 - no. 3, 373-390
summary Professionals who are involved in design, construction and occupancy phases of a building not only generate information that must eventually be used by other building professionals, but also they themselves must use data and informationprovided by others such as product manufacturers, planning departments, etc. The integration of information and data through all phases of the life cycle of a building is important as it impacts the work done by a large number of constituents in the building industry. Seamless integration of such information has been a bigger concern for those who are downstream users of the data generated by the architect as he/she designs a building. Such downstream users can range from structural engineers to construction managers, from facility managers to building asset managers. More recently, the considerable increase in the design and operationof intelligent buildings that incorporate a very wide range of technologies has rendered this coordination more important than ever.
series journal
more http://www.ingentaconnect.com/search/expand?pub=infobike://mscp/ijac/2005/00000003/00000003/art00008
last changed 2007/03/04 07:08

_id cf2005_1_68_34
id cf2005_1_68_34
authors PETZOLD Frank and BÜRGY, Christian
year 2005
title Hands Free: A Wearable Surveying System for Building Surveying
source Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 351-360
summary Activities in the building industry in Europe concentrate increasingly on a combination of renovation and new-building. A prerequisite for comprehensive IT supported design and planning in the context of existing buildings is both the use of on-site computer- aided surveying techniques and the integration of all professional disciplines in an integrated information and communication system. The starting point is often the building survey on site. An examination of currently available IT tools and hardware shows insufficient support for planning within existing built contexts. Surveying equipment has been derived from other disciplines without being modified to cater for the specific needs of building surveying. This paper describes a concept for computer-aided digital building surveying equipment based upon a wearable computer and AR to close the gap between specialist equipment adapted for use in building surveying and the need for simple straightforward surveying equipment for architects and engineers.
keywords building surveying, wearable computing, HCI, industrial design, systems engineering
series CAAD Futures
email
last changed 2006/11/07 07:27

_id sigradi2006_e034d
id sigradi2006_e034d
authors Ryan, Rachel and Donn, Michael
year 2006
title A 3D, interactive, multilayered, web-enabled model as a tool for multiple sets of end user groups: A case study and end user analysis
source SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 392-396
summary This research undertakes a case study involving focus groups of potential end users, to identify how a successful digital tool could be created using new and emerging technologies, to accommodate the multiple needs of these end users. 2005 saw the completion of a research paper, which proposed that a single, 3 dimensional digital model of a city forming a core for many different information systems, is a better approach to the needs of the city than many individual models optimised for each information system. The case for the single 3D model was evaluated through the research, development, delivery and analysis of a prototype 3 Dimensional model of Wellington City, New Zealand, presenting different ‘views’ of information in Wellington: a rendered visualisation in an animated “walkthrough”; the impact of planning constraints on daylight; interactive “plots” of property values. The development and delivery of the prototype model was analysed in regards to how complex, costly and time consuming it may be to exploit one base model for several purposes; and also therefore how beneficial, affordable and potentially successful a single model may be. The prototype model was created to test the idea, and therefore provided conclusions based on a limited feasibility analysis - with four potential information layers modelled and two potential delivery methods tested. The prototype model and user analysis results were presented in a research report that suggested further research and development of a single model could be very beneficial: Positive feedback from potential end users and data providers, and examples of potential data mining opportunities forming the basis of the need for continued research. 2006 sees the research continue as an 18 month research project in conjunction with an industry partner, Terralink International, (http://www.terralink.co.nz/). Terralink International Limited provides GIS and mapping solutions which according to their web site: “enable better business management.” The company maintains a national resource of “imagery, cartography, and spatial databases” and provides consultancy services linking these to company databases through GIS systems. The research investigates the potential for 3 dimensional, interactive, multilayered models to enhance delivery of information to multiple end user groups. The research method uses functional prototypes in end-user focus group workshops. These workshops, consisting of a combination of presentations, hands on interactive examples, group discussions, and individual feedback surveys, aim to establish how a tool might best be developed to communicate to a wide range of end users. The means of delivery whether a stand alone tool or web-based is a key element of the user group workshop assessment process. Note: The submission of the prototype tool (via video or interactive media) would greatly increase the effectiveness of the research presentation. Ability to include such media would be greatly appreciated.
keywords multilayered; 3D; end users; interactive; web-enabled
series SIGRADI
email
last changed 2016/03/10 09:59

_id sigradi2005_350
id sigradi2005_350
authors San Martín, Patricia; Sergio Bertozzi
year 2005
title “Otra Andria” e-learning environment for the architectural designing workshop
source SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 350-354
summary This work describes results obtained from a test over an experimental prototype “Otra Andria” (OA1) designed by the investigation team of “Obra Abierta: Over the construction of an investigating and learning system in virtual environments”. OA1 is a basic tool. It show us: three simultaneous screens with editing tool bars, an integrated chat for publication and discussion, images and texts, all this in synchronized time. Tools are simultaneously accessible from all boards by the teacher, the students or between pupils. There is a web log, a personal web, and an activities’ organization space for the professors. This experience was helpful to understand the actual needs for virtual environment applications as well as e-learning problems in such cases where the know-how is not available to every attendant to the course. That means we must begin working on hyper-medial language diffusion among all teachers who want to use the ICT in all its actual potentiality. [Full paper in Spanish]
series SIGRADI
email
last changed 2016/03/10 09:59

_id 2005_751
id 2005_751
authors Szalapaj, Peter
year 2005
title The Digital Design Process in Contemporary Architectural Practice
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 751-759
doi https://doi.org/10.52842/conf.ecaade.2005.751
summary There is an increasing trend in contemporary architectural projects towards dependence upon digital processes for their organisation and technical evaluation of a range of design criteria. Digital representations are central not only to form generation and structural analysis, but also to the integration of fabrication and construction directly with the earlier design stages. It is important to bear in mind, however, that digital technology is only a means to an end which is the design process itself. Each technique of digital representation and analysis brings advantages and disadvantages to this process, and should therefore be described in these terms. It is becoming increasingly feasible to develop a rapid succession of distinct digital models, both geometric and dynamic, in early design stages. These can be tested and evaluated with respect to a range of analytical criteria, and the results of these analyses can affect further model development thus forming a cyclical process of 3-D digital model generation.
keywords Dynamic Modelling, Geometric Modelling, Surface Modelling, Parametric Representation, Digital Fabrication
series eCAADe
email
last changed 2022/06/07 07:56

_id cf2005_2_52_159
id cf2005_2_52_159
authors SHIH Naai-Jung and WU Ming-Chang
year 2005
title A 3D Point-cloud-based Verification of As-built Construction Progress
source Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 193-202
summary Point clouds were overlapped to reveal differences between two working days. The same type of comparison was made between 2003.2.11 and 2003.12.11. Comparisons between the original schedule and real schedule (the catch-up schedule) were also made. The overlapping test provides one of the most comprehensive checking methods of the as-built progress in a digital format. Examples show that the overlapping comparisons help identify the addition and removal of objects scanned from 50 meters away. The geometric information is feasible for construction inspection and records. Limitations and benefits of overlapping are discussed.
keywords 3D scan, construction technology, schedule
series CAAD Futures
email
last changed 2005/05/05 07:06

_id caadria2014_042
id caadria2014_042
authors Alam, Jack and Jeremy J. Ham
year 2014
title Towards a BIM-Based Energy Rating System
source Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi https://doi.org/10.52842/conf.caadria.2014.285
summary Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series CAADRIA
email
last changed 2022/06/07 07:54

_id 791f
id 791f
authors Stellingwerff, M. C.
year 2005
title VIRTUAL CONTEXT - INVESTIGATING THE CHARACTERISTICS AND OPPORTUNITIES OF DIGITAL VISUALISATION MEDIA FOR SITUATED APPROACHES TO ARCHITECTURAL DESIGN IN AN URBAN ENVIRONMENT
source Delft University Press
summary This research initiative addresses the issue of Design in relation to Virtual Context.

Central to this study are the innovative potentials and instrumental opportunities of computer based media techniques, capable of generating interactive models and changing perspectives for the benefit of urban and architectural design.

The ambition was to not only make a contribution to the existing body of knowledge concerning digital technologies and their applications, but explore theoretical conditions which might help define and stimulate further study.

From the outset, the focus was on furthering the opportunities for computer based representation media in creative design. On the basis of a series of explorative studies the subject of this research was targeted: the issue of Design in Context, or more specifically: Design(ing) in a Virtual Context.

During the process there was a marked shift in the conception of the subject from – more or less immersive – VR technologies in the direction of approaches which might be expected to become readily available in practice and education and could be effective in actual design processes. This insight also brought about a shift in emphasis from realism per-se towards creating a sense of situatedness.

The design representation system which was developed was intended to not just allow for one type of model view, but to afford an array of different views, from which the designer would be able to choose freely, depending on the phase and focus of design as well as personal preferences. A series of interface prototypes and support tools were developed especially and successively tested experimentally. 

For the intended final design driven experimental study, different virtual context models were considered. Eventually, an integral –  purely fictitious – design ‘environment’ was constructed in the computer, so that the workings of the proposed system and its components would be tested systematically.

A conscious choice was made for an in depth study, on a relatively modest scale, which would a certain amount of mutual involvement between designer and researcher, to confront the participants with the finer aspects of the proposed system in a relatively short time and to gather detailed data. A half dozen design professionals were invited to participate in a closely monitored experimental exercise.

The results of this study therefore do not offer straightforward, indisputable facts, to be considered representative for the design community as a whole, but indicate that the working methods of the individual designers – when discovering aspects of the site, developing and presenting proposals and reflecting on the qualities of represented designs – tend to vary considerably. For this reason the interactive representation system proved to be of value. Participants could express different view preferences, with more or less realistic image modes being used in different phases of their design developments, with varying experiences of situatedness. Some of the design professionals participants were very appreciative of the system’s opportunities, others tended to be more ‘set in their ways’.

The results of this experimental study indicate that there may particularly be opportunities for interface applications which are able to function interactively, offering individual designers –  as well as others involved in evaluating design proposals – a variety of tools with which to approach specific design artefacts in their changing contexts. Virtual models can play not only an important role as a ‘reminder’ for the designer but also to other parties playing an active role in the design and implementation processes. Interactive environment models are not only promising as exploration tools for existing sites, but could be valuable to test the impact of a design on its location. This could be especially interesting if the site is difficult or impossible to visit or as yet a virtual construction. In addition such an approach might be beneficial for objective comparison and evaluation of design proposals in competitions and in education as well as in on-line collaborative design projects where the context is still in the process of being developed.  

series thesis:PhD
type normal paper
email
more http://www.bk.tudelft.nl/users/stelling/internet/
last changed 2005/03/02 22:40

_id ecaade2017_184
id ecaade2017_184
authors Almeida, Daniel and Sousa, José Pedro
year 2017
title Tradition and Innovation in Digital Architecture - Reviewing the Serpentine Gallery Pavilion 2005
source Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 267-276
doi https://doi.org/10.52842/conf.ecaade.2017.1.267
summary Please write your aToday, in a moment when digital technologies are taking command of many architectural design and construction processes, it is important to examine the place and role of traditional ones. Designed by Álvaro Siza and Eduardo Souto de Moura in collaboration with Cecil Balmond, the Serpentine Gallery Pavilion 2005 reflects the potential of combining those two different approaches in the production of innovative buildings. For inquiring this argument, this paper investigates the development of this project from its conception to construction with a double goal: to uncover the relationship between analogical and digital processes, and to understand the architects' role in a geographically distributed workflow, which involved the use of computational design and robotic fabrication technologies. To support this examination, the authors designed and fabricated a 1:3 scale prototype of part of the Pavilion, which also served to check and reflect on the technological evolution since then, which is setting different conditions for design development and collaboration.bstract here by clicking this paragraph.
keywords Serpentine Gallery Pavilion; Computational Design; Digital Fabrication; Wooden Construction; Architectural Representation;
series eCAADe
email
last changed 2022/06/07 07:54

_id ijac20053303
id ijac20053303
authors Alvarado, Rodrigo Garcia; Castillo, Gino Alvarez; Marquez, Juan Carlos Parra; Mayorga, Sergio Navarro
year 2005
title Filmic Development of Architectural Animations
source International Journal of Architectural Computing vol. 3 - no. 3, 299-316
summary This paper proposes a general method to make animated presentations of architectural designs, based on cinematographic techniques. Particularly, it reviews theoretical documenttion about filmmaking as well as several productions that exhibit remarkable locations. The proposed method first comprises of a planning stage, with the narrative and graphic formulation of the presentation. Next is an elaboration or adjustment stage for the digital modelling of the design, and finally, there is an animation production and editing stage. Likewise, the research sets up a computer implementation of some activities and characteristics, and experiments in the programming of camera movements for architectural animations. In general, this work suggests focusing on the communication of the qualitative features of the design, instead of the elaboration of the digital model, and on emphasizing the visual diversity, graphic style and narrative construction of the presentation.
series journal
more http://www.ingentaconnect.com/search/expand?pub=infobike://mscp/ijac/2005/00000003/00000003/art00004
last changed 2007/03/04 07:08

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 27HOMELOGIN (you are user _anon_606134 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002