Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 553

Reformat results as: short short into frame detailed detailed into frame

_id	cf2005_2_34_32
id	cf2005_2_34_32
authors	SENYAPILI Burcu
year	2005
title	A System Model for Identifying Historic Buildings by Using Multiple Typologies
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 109-118
summary	This paper discusses the problem of locating buildings of architectural heritage with respect to different typologies. The cross referencing process of such a task can often be tedious and difficult. Within this framework, this paper introduces a system model that enables users to pin-point the buildings with respect to different typologies. The model introduced here differs from similar efforts by displaying of the results of inquiries on a visual matrix. A limited sample domain of Classical Ottoman architectural heritage illustrates how the proposed model will operate. All the buildings entered in the system have textual and visual data entries along with static and dynamic attributes. In any inquiry, the attributes determine which buildings will be included, and the visual data fill in the cells of the matrix.
keywords	architectural heritage, design education, typologies, database systems
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	2005_547
id	2005_547
authors	Elger, Dietrich and Russell, Peter
year	2005
title	Crisis? What Crisis?
doi	https://doi.org/10.52842/conf.ecaade.2005.547
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 547-556
summary	The paper describes the current situation concerning career opportunities in the field of architecture in developed western countries. Several aspects that are almost universal mark this situation. Firstly, there are too many architects chasing traditional work in competition with structural (civil) engineers. This is not surprising in consideration of the fact, that the architectural education industry produces far too many new architects for the economy to absorb. In Germany, the number is almost three times too many. Secondly, the needs of the building industry have changed over the past twenty years so that the skills that architects want to offer are not necessarily those that are sought. Lastly, the constant specialisation of work has continued unabated. Architects, as generalists, have idly watched their areas of expertise be usurped from neighbouring fields like civil and structural engineering The reasons for this crisis are manifold. In the schools of architecture, the discussions often deal with form or formal arguments, which, in fact, have little or no relevance to the building industry. This position was tenable so long as the clients were willing to accept formal arguments in order to receive buildings of high quality or current social relevance (i.e. current architectural fashion). With the dual aspects of globalisation and a shift to maintaining building stocks rather than producing new buildings, the tolerance for “architectural” discussions has been reduced even further. Indeed, the monetary pressures overwhelm almost all other aspects, including so-called green issues. What is more, most of the monetary issues are time based. Time represents, perhaps, the largest pressure in any current planning project. The clients expect expedient, accurate and inexpensive solutions. If architects are not able to produce these, the clients will (and do) go elsewhere. The authors argue that there remain serious problems to be solved for architects and the metier in general. Ever cheaper, ever faster and ever encompassing information technologies offer the architectural community a chance to turn recent trends on their head. By using information technologies to their full potential, architects can reassert themselves as the coordinators of building information and processes. Simply put, this means less photorealistic rendering and more databases, which may be unappealing for those architects who have positioned themselves as “designers” and are able to talk long on form, but short on cost or logistics. Nonetheless, the situation is not lost, so long as architects are able to recognise what is desired from the point of view of the client and what is desired from the point of view of the architect. It is not a question of one or the other. Architects must be able to offer innovative design solutions that not only address the fiscal, legal and programmatic constraints, but also push the boundaries at to the position of architecture in the community at large. For educators, it must be made clear that the real potential architects possess is their encompassing knowledge of the building process including their expertise concerning questions of architectural form, function, history and art. Precisely while they are generalists are architects invaluable in a sea of specialists. The biggest hurdle to asserting this in the past has been the control of the vast amounts of information. This is no longer a problem and also no longer an excuse. In the education of architects, it must be made clear that their role dictates sovereignty over architectural information. Architectural Information Management is a necessary skill alongside the more traditional architectural skills. A brief outlook as to how this might come about is detailed in the paper. The authors propose didactic steps to achieve this. Primarily, the education of computer supported planning should not simply end with a series of lectures or seminars, but culminate in integrated Design Studios (which including Design-Build scenarios).
keywords	Architectural Information Mangement, Computer Supported Design Studios, CSCW
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2005_333
id	sigradi2005_333
authors	Koutamanis, Alexander
year	2005
title	Group design evaluation
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 333-337
summary	Architectural visualization refers not only to the bulk of documents produced in the externalization of design representations but also to a major component of design communication and decision-taking. The paper focuses on the use of visualization in group design processes, i.e. processes typically involving the issues of common authorship, multi-actor design and intensive interaction between different aspects. It proposes that effective group design visualization requires hybrid environments that combine digital and analogue media in unobtrusive and efficient support structures. Registration of design information in group visualization refers primarily to two complementary dimensions: the syntagmatic (the sequence of actions that produce an image) and the paradigmatic (the collection of graphic primitives in the image). Recording syntagmatic information (i.e. who drew what and when) is essential for disentangling the usually dense results of group visualization and for distinguishing between actors, aspects and alternatives.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	2005_687
id	2005_687
authors	Nir, Eyal and Capeluto Guedi
year	2005
title	Smart Cloud-of-Points Model: Point-based Digital Media and Tools for Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2005.687
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 687-694
summary	Abandoning the scale-model concept in favor of an abstract representation led us to the development of a digital design model based on point-clouds as design media. In this paper we examine the potential usage of point-clouds as design media. Extending the point-cloud model with a forth dimension represented as a numeric pointer to generative algorithms provides a parametric interface for the regeneration and alteration of the extended point-cloud model referred to as “Smart Cloud of Points”.
keywords	Point-Clouds; Parametric Design; Generative Modeling
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cf2005_2_52_159
id	cf2005_2_52_159
authors	SHIH Naai-Jung and WU Ming-Chang
year	2005
title	A 3D Point-cloud-based Verification of As-built Construction Progress
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 193-202
summary	Point clouds were overlapped to reveal differences between two working days. The same type of comparison was made between 2003.2.11 and 2003.12.11. Comparisons between the original schedule and real schedule (the catch-up schedule) were also made. The overlapping test provides one of the most comprehensive checking methods of the as-built progress in a digital format. Examples show that the overlapping comparisons help identify the addition and removal of objects scanned from 50 meters away. The geometric information is feasible for construction inspection and records. Limitations and benefits of overlapping are discussed.
keywords	3D scan, construction technology, schedule
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	caadria2005_a_1a_b
id	caadria2005_a_1a_b
authors	B. Senyapili, I. Basa
year	2005
title	RECONCILING COMPUTER AND HAND: THE CASE OF AUTHOR IDENTITY IN DESIGN PRESENTATIONS
doi	https://doi.org/10.52842/conf.caadria.2005.013
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 13-22
summary	As computers were newly emerging in the field of architectural design, it was claimed that the impact of computers would change the way architects design and present. However, within the course of computer use in design, although the field of architectural practice might have been altered extremely, in architectural education there still seems to be a bond to conventional mind-hand-paper relation. One of the reasons for that bond is the fact that although being r 1000 elated to many technologies, architecture essentially positions itself around an artistic core that is still fed with conventional modes of creation. Architectural education aims at adopting and working on this very core. One of the major contributors in the formation of this core is the presence of author identity. This paper makes a critical approach to computers in terms of expressing author identity in design presentations especially during design education. We believe that the author identity is important in design education in terms of identifying the potential and skills of the student. Especially in design education the final step of design process turns out to be the presentation, unlike architectural practice where the presented design is actually built. Within this conception, two different studies were held in an educational environment with 160 design students and 20 design instructors. The results of both studies pointed at the fact that the digital opportunities that exist for design education should evolve around preserving and underlining the author identity in design presentations.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cdc2008_243
id	cdc2008_243
authors	Loukissas, Yanni
year	2008
title	Keepers of the Geometry: Architects in a Culture of Simulation
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 243-244
summary	“Why do we have to change? We’ve been building buildings for years without CATIA?” Roger Norfleet, a practicing architect in his thirties poses this question to Tim Quix, a generation older and an expert in CATIA, a computer-aided design tool developed by Dassault Systemes in the early 1980’s for use by aerospace engineers. It is 2005 and CATIA has just come into use at Paul Morris Associates, the thirty-person architecture firm where Norfleet works; he is struggling with what it will mean for him, for his firm, for his profession. Computer-aided design is about creativity, but also about jurisdiction, about who controls the design process. In Architecture: The Story of Practice, Architectural theorist Dana Cuff writes that each generation of architects is educated to understand what constitutes a creative act and who in the system of their profession is empowered to use it and at what time. Creativity is socially constructed and Norfleet is coming of age as an architect in a time of technological but also social transition. He must come to terms with the increasingly complex computeraided design tools that have changed both creativity and the rules by which it can operate. In today’s practices, architects use computer-aided design software to produce threedimensional geometric models. Sometimes they use off-the-shelf commercial software like CATIA, sometimes they customize this software through plug-ins and macros, sometimes they work with software that they have themselves programmed. And yet, conforming to Larson’s ideas that they claim the higher ground by identifying with art and not with science, contemporary architects do not often use the term “simulation.” Rather, they have held onto traditional terms such as “modeling” to describe the buzz of new activity with digital technology. But whether or not they use the term, simulation is creating new architectural identities and transforming relationships among a range of design collaborators: masters and apprentices, students and teachers, technical experts and virtuoso programmers. These days, constructing an identity as an architect requires that one define oneself in relation to simulation. Case studies, primarily from two architectural firms, illustrate the transformation of traditional relationships, in particular that of master and apprentice, and the emergence of new roles, including a new professional identity, “keeper of the geometry,” defined by the fusion of person and machine. Like any profession, architecture may be seen as a system in flux. However, with their new roles and relationships, architects are learning that the fight for professional jurisdiction is increasingly for jurisdiction over simulation. Computer-aided design is changing professional patterns of production in architecture, the very way in which professionals compete with each other by making new claims to knowledge. Even today, employees at Paul Morris squabble about the role that simulation software should play in the office. Among other things, they fight about the role it should play in promotion and firm hierarchy. They bicker about the selection of new simulation software, knowing that choosing software implies greater power for those who are expert in it. Architects and their collaborators are in a continual struggle to define the creative roles that can bring them professional acceptance and greater control over design. New technologies for computer-aided design do not change this reality, they become players in it.
email
last changed	2009/01/07 08:05

_id	2005_221
id	2005_221
authors	Sousa, José Pedro and Duarte, José Pinto
year	2005
title	Digital Desires, Material Realities
doi	https://doi.org/10.52842/conf.ecaade.2005.221
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 221-228
summary	Digital design and manufacturing technologies are progressively employed in building construction and architects interest in this field has grown widely, as many recent works, publications and scientific meetings demonstrate. By identifying some of the main reasons and expectations that were at the basis of the integration of CAD/CAM processes in the discipline, this paper examines the real success of these technological developments in contemporary architecture. By analyzing current work and literature the authors argue that there is often a discrepancy between the discourse on emerging new conditions for the practice, and the practical reality itself. To investigate this technological gap, the paper discusses in depth one of the most advocated promises of these new technologies: the feasible mass production of differentiation. Considering design intent, available CNC fabrication processes and material properties, it describes and critically analyses different strategies for building architectural surfaces, presenting specific examples from contemporary architecture. Realizing that there are technological limitations in the fulfillment of conceptual aspirations, this paper identifies possible innovative directions in building construction, based on the idea of structural performative surfaces. Finally, the authors reflect on the specific nature of architecture, distinguishing it from other areas that also employ digital technologies, to frame, from within the discipline, the technological expectations and its potential further developments.
keywords	CAD/CAM, Digital Fabrication, CNC Technologies, Rationalization, Mass-Customization
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2005_b_5c_d
id	caadria2005_b_5c_d
authors	Yang-Ting Shen, Tay-Sheng Teng
year	2005
title	Personal Mobile Device for Situated Interaction
doi	https://doi.org/10.52842/conf.caadria.2005.382
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 382-387
summary	The objective of the paper is to explore how the personal mobile devices help the user to interact with the space and get the personal service. We embed the RFID tag in PDA for the sake of identifying by the space. The space adapts itself to fit the user’s need by reading the data of the electronic tag. And the user uses PDA to interact with the space and record the interactive experience. We establish an interactive scenario between the user and the space to experiment how the system work.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2005_743
id	sigradi2005_743
authors	Albornoz Delgado, Humberto Ángel; Leticia Gallegos Cazares
year	2005
title	Science teaching with technology (ECIT)
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 743-748
summary	There is an evident need to improve the teaching of sciences. Therefore the ECIT Web page has been designed to assist the teaching of physics, chemistry and biology to secondary students. Considering technology as a mean and not as an end for teaching, the “ECIT Model” was developed following pedagogic as well as design criteria. Its’ implementation requires a specific classroom outline, the use of certain technological tools and an efficient interface, to achieve a working environment (not only digital) of action and learning. The application has been successful and progress has been remarkable in students´ conceptual development in all the subjects. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_673
id	sigradi2005_673
authors	Amorim, Arivaldo Leão de; Daniel Chudak
year	2005
title	Digital Historic Heritage: documenting of Pelourinho, Salvador - Bahia, Brazil, with 3D laser scanning technology
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 673-678
summary	This paper describes the Pelourinho Project realized past July in Salvador, during the 1st International Conference on 3D Laser Scanning for Heritage Documentation. The Pelourinho located at the historic center of Salvador, is an impressive wide set of buildings listed by UNESCO as World Heritage. The text contains a quickly overview about the 3D laser scanning technology, shows how data are captured and what they stored and what they means. The 3D laser scanning model, another kind of 3D geometric model is called point cloud and represents an excellent way to store data of some particular constructions. Because its irregular shapes it is very arduous to survey and represent these constructions by any other method. The point cloud model is an excellent way to represent with integrity and accuracy these particular complex shapes like the colonial baroque churches in Brazil. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_811
id	2005_811
authors	Anay, Hakan
year	2005
title	A Critical Approach to the Use of Computers in Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2005.811
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 811-817
summary	There are two dominant approaches to architectural and urbanistic problem solving: program based approaches and paradigm based approaches. Beyond these two, this paper proposes the critical/formalist approach as a paradigm for architectural design while summarizing the epistemological foundations of it, and investigates the possible contribution of the computers to this approach. The primary aim is to set a starting point for a more comprehensive future research.
keywords	Design Theory, Design Methodology, Computer Aided Design, Formalism, Architectural Form
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_729
id	2005_729
authors	Asanowicz, Alexander
year	2005
title	Computer Renderings – „Reality is Overrated”
doi	https://doi.org/10.52842/conf.ecaade.2005.729
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 729-735
summary	In this paper, two problems concerning truthfulness of computer-generated visualization are considered. The first one concerns relationships between reality and its representation by computer renderings. The second problem concerns the kind of representations people need. These problems are analyzed for static perception of architectural forms based on computer visualization, and for dynamic walk-through perception of urban space. The thesis of the paper is that many photorealistic renderings are excessively realistic and thus not true. In this context, a new question arises: do we need the true representation of an object? The author claims that we need “adequate” pictures. Adequate means a picture that is satisfactory in particular situation. The problem of equivalence of media (renderings and animations) and reality is not that important here. Much research is concerned with the truthfulness and falsity of information. However, they do not take into consideration that frequently what seems to be real exerts bigger influence on people than what is in fact real. Understanding this problem may help us in producing images that better correspond to people’s expectations.
keywords	Perception, Rendering, Non-Photorealistic Rendering
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia05_226
id	acadia05_226
authors	Biloria, N., Oosterhuis, K. and Aalbers, C.
year	2005
title	Design Informatics
doi	https://doi.org/10.52842/conf.acadia.2005.226
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 226-235
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for envisaging complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This design-research approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. The hence extorted ‘point cloud’ configuration serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed script-routines, iteratively run calculations to generate steel-wireframes, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct hence enabling timely and effective construction of the conceptualized form.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2005_647
id	2005_647
authors	Caldas, Luisa G.
year	2005
title	Three-Dimensional Shape Generation of Low-Energy Architectural Solutions using Pareto Genetic Algorithms
doi	https://doi.org/10.52842/conf.ecaade.2005.647
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 647-654
summary	This paper extends on a previous work on the application of a Generative Design System [GDS] to the evolution, in a computational environment, of three-dimensional architectural solutions that are energy-efficient and adapted to the climatic environment where they are located. The GDS combines a well-known building energy simulation software [DOE2.1E] with search procedures based on Genetic Algorithms and on Pareto optimization techniques, successfully allowing to tackle complex multi-objective problems. In the experiments described, architectural solutions based on a simplified layout were generated in response to two often-conflicting requirements: improving the use of daylighting in the space, while controlling the amount of energy loss through the building fabric. The choice of a cold climate like Chicago provided an adequate framework for studying the role of these opposing forces in architectural form generation. Analysis of results shows that building characteristics that originate successful solutions extend further than the building envelope. Issues of massing, aspect ratio, surface-to-volume ratio, orientation, and others, emerge from the analysis of solutions generated by the GDS, playing a significant role in dictating whether a given architectural form will prove adapted to its climatic and energy requirements. Results suggest that the questions raised by the exploration of form generation driven by environmental concerns are complex, deserving the pursuit of further experiments, in order to better understand the interaction of variables that the evolutionary process congregates.
keywords	Generative Design System, Genetic Algorithms, Evolutionary Architecture, Artificial Intelligence in Design, Building Energy Simulation, Bioclimatic Architecture, Environmental Design.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2005_a_7b_c
id	caadria2005_a_7b_c
authors	Chang, Chuang-Ting
year	2005
title	Some Phenomena of Touch in Study Models
doi	https://doi.org/10.52842/conf.caadria.2005.277
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 277-287
summary	The senses of “Touch” bring people the feeling of reality, and human beings can always naturally sense the tactile impression. Hence we touch things and our sense tells us that our hands are touching something (Hinckley et al. 1999). Comparing to the tools used by designers between traditional and new digital media in the design process, the most difference is in the sense of touch. This paper focuses on the sense of touch to point out the haptic experience which have ignored by the past in design process. Four phenomena will be discussed in details and some useful suggestions given for future study.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2005_2_32_203
id	cf2005_2_32_203
authors	CHASE Scott and AHMAD Sumbul
year	2005
title	Grammar Transformations: Using Composite Grammars to Understand Hybridity in Design
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 89-98
summary	Hybrid designs are those that develop from multiple sources. This paper presents the methodology of composite grammars, developed by merging multiple grammars, for the analysis of hybrid designs. The methodology is discussed with an example from Islamic architecture, which is known to have developed by borrowing from various sources. The methodology is seen to be useful for the analysis of the evolution of historic architecture, as well as for the development of new languages of designs.
keywords	shape grammars, generative design, historical analysis, Islamic architecture, hybridity
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	caadria2006_565
id	caadria2006_565
authors	CHEN CHIEN TUNG
year	2006
title	DESIGN ON SITE: Portable, Measurable, Adjustable Design Media
doi	https://doi.org/10.52842/conf.caadria.2006.x.b7f
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 565-567
summary	Space designers usually look for information on site before proceeding design. They image any possibilities of design, while they are on site. Restricted to traditional design media, if they want to develop their ideas further, they have to go back to desks. This kind of design process can capture only part of information of the site. Why not do some developments directly when designers are on the site? That is the starting point of this paper. The whole situation of site is very complicated, so it is very difficult discussing all the possibilities. In order to understand how to design on site, reducing the variations is needed. Tsai and Chang (2005) proposed a prototype about design on site, which focuses on land forming. So I chose interior as the site to reduce the variation and have more controllable factors. Still there are many factors effecting design on site, scale is very unique and very important factor of them. Beginners are difficult to really feel how long it is on the plan drawing, and even most advanced VR equipment still can’t fully present the rich information on the site. To experience the site though body, the main idea is how to propose a portable device that can support space designer to do design on site directly, with intuitional body movement and precise scale, and get feedback immediately.
series	CAADRIA
email
last changed	2022/06/07 07:49

For more results click below: