Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 134

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	2006_168
id	2006_168
authors	Papalexopoulos, Dimitris
year	2006
title	Digital Territories and the Design Construction Continuum
doi	https://doi.org/10.52842/conf.ecaade.2006.168
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 168-174
summary	The purpose of the paper is to bring together the two newly elaborated concepts of Digital Territories (DT) and Design Construction Continuum (DCC) in order to approach the design of evolving – intelligent environments.Digital Territories is a concept elaborated 2005 by a Core Expert Group, conceived as an ephemeral Ambient Intelligence (AmI) space. DTs formed through the interconnection of physical objects embedding digital technologies, postulate the integration of the physical and the digital world, searching for operative definitions of new evolving in time functionalities. In DT’s, bridges between the physical and the digital are discrete elements disposing of certain autonomy in their conception and internal structure. Bridges have to be designed and located. The DCC proposes to relate design, fabrication and construction through information networks (it is in fact a DT). Through the DCC approach, design information is becoming construction information and industrial fabrication information. The DCC has to integrate interaction design and respond to questions posed by DTs design. DTs are integrated to DCC by constituting an intermediate level between building programming and design. Intelligent Building Components, that is AmI components operating as bridges between the physical and the digital in Digital Territories formations, cooperating to develop swarm intelligence applications to architectural space, are elements managed by the DCC. DT’s are about spaces communicating and the DCC is about communicating (design) space.
keywords	Digital Territories; Design Construction Continuum; Interaction Design; Evolving Environments; Intelligent Environments; Location Diagrams; Building Programming
series	eCAADe
email
last changed	2022/06/07 08:00

_id	2005_357
id	2005_357
authors	Pita, Javier
year	2005
title	Analogous Models and Architecture
doi	https://doi.org/10.52842/conf.ecaade.2005.357
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 357-364
summary	Among the many possible ways of classifying the concept of “modelling”, Maldonado refers to “homologies” when structure but not shape and function are similar; “analogies” when structure and function are similar, but not shape; and “isomorphisms” when structure and shape are similar, but function may or may not be similar. Traditional artistic representation would basically fall into the category of isomorphisms, whilst analogous models are to be found mainly in activities such as magic, play or industry. Other ways of representing reality, such as architectural models or drawings, are also traditionally regarded as isomorphisms. In the course of the last century, this panorama has been altered somewhat by the post-industrial or second industrial revolution in computing and communications. Using mathematical algorithms, the computing tool has an enormous capacity to describe things of extremely diverse nature: from the shape of everyday objects to relatively complex human behaviours, these can all be described using the common language of bits. Alongside developments in computing, the world of communications has been providing us with increasingly advanced means of transmitting information, including sophisticated systems capable of emulating our own perceptions. This paper is intended as a contribution to the theoretical debate conducted over recent years on the considerable shift that has occurred in architectural representation techniques. The analysis that follows highlights a two-fold change in traditional representation techniques: on the one hand, a change in the nature of the model (as is discussed in this paper); and on the other, a modification of the interfaces or communication and perception mechanisms of the model. The conjunction of these two factors has led to the emergence of representation modes that can no longer be regarded simply as isomorphisms of reality. Insofar as virtual spaces have the capacity for us to move, to interact, in short to inhabit them, they should be regarded as “analogous models” of architectural space. In other words, there has been a shift away from representation modes based on illusion in favour of those based on simulation.
keywords	Representation, Models, Virtual Space, Virtual Reality
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2005_731
id	sigradi2005_731
authors	Albornoz Delgado, Humberto Ángel; Laura Talía Escalante Rodríguez, Leticia Gallegos Cazares
year	2005
title	Didactic Design: light and optics for preschool level
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 731-737
summary	Since 2003, we have been developing a pedagogic proposal and didactic material for teaching Light and Optics to kindergarden children that enhances the construction of the first scientific thinking schemes. The design (industrial and graphic) applied to this project has generated an educational product composed of 44 objects. These materials allow teaching concepts such as: combination of colors, light indispensable to see, formation of shadows and images are not objects. These have been developed as inciters of curiosity, capable to awake the innate restlessness of children, achieving to stimulate their creativity. The purpose is to explore knowledge and construct their own ideas; enrich their experiences and inquire a reality that was drawn grey and tedious, generating a process of manipulation-action and then representation-conceptualization. This product has been successfully used as a pilot test in a kindergarden, reflecting significant gains in students’ science learning. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2005_a_7c_a
id	caadria2005_a_7c_a
authors	Anandan Karunakaran
year	2005
title	Organisation of Pedestrian Movements: an Agent-Based Approach
doi	https://doi.org/10.52842/conf.caadria.2005.305
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 305-313
summary	Cities are becoming more complex in this digital era due to technological changes. Thinking of cities without such technological changes is equivalent to an embryonic state in the morphology of city growth, that is, the growth seems less advanced. So it is appropriate to think of the non digital city digitally. Urban design is one state which establishes the perfect relationship between the street, people and building. The relationship of the people with the building and street is becoming one of the key factors in architecture. It has been observed that the design of a city has been influenced by the pedestrian movement. Many cities prior to the industrial era were largely determined by the social interactions based on walking. Thus the pedestrians play a key role in the formation of the city. They are a very important component in any representation of transport movements. They generally terminate or initiate a chain of linked activities, and if observed carefully, a single pedestrian movement is meant to include various sub journeys from one location to another. In order to organize pedestrians, we need to understand the pedestrian movement system. Though there is a lot of development of urban models in this aspect, it is still in a nascent state in comparison with the digital advancement. Thus much research work is carried out which can be applied to any given environmental setting, and as a result urban designers can respond to the changing socio-cultural technologies.
series	CAADRIA
last changed	2022/06/07 07:54

_id	acadia05_012
id	acadia05_012
authors	Anshuman, Sachin
year	2005
title	Responsiveness and Social Expression; Seeking Human Embodiment in Intelligent Façades
doi	https://doi.org/10.52842/conf.acadia.2005.012
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 12-23
summary	This paper is based on a comparative analysis of some twenty-six intelligent building facades and sixteen large media-facades from a socio-psychological perspective. It is not difficult to observe how deployment of computational technologies have engendered new possibilities for architectural production to which surface-centeredness lies at that heart of spatial production during design, fabrication and envelope automation processes. While surfaces play a critical role in contemporary social production (information display, communication and interaction), it is important to understand how the relationships between augmented building surfaces and its subjects unfold. We target double-skin automated facades as a distinct field within building-services and automation industry, and discuss how the developments within this area are over-occupied with seamless climate control and energy efficiency themes, resulting into socially inert mechanical membranes. Our thesis is that at the core of the development of automated façade lies the industrial automation attitude that renders the eventual product socially less engaging and machinic. We illustrate examples of interactive media-façades to demonstrate how architects and interaction designers have used similar technology to turn building surfaces into socially engaging architectural elements. We seek opportunities to extend performative aspects of otherwise function driven double-skin façades for public expression, informal social engagement and context embodiment. Towards the end of the paper, we propose a conceptual model as a possible method to address the emergent issues. Through this paper we intend to bring forth emergent concerns to designing building membrane where technology and performance are addressed through a broader cultural position, establishing a continual dialogue between the surface, function and its larger human context.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2005_211
id	2005_211
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2005
title	The Quest for the Holy Grail – Holistic Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2005.211
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 211-218
summary	Architectural design, due to phenomena such as globalisation of the construction process, delocalisation of professional and industrial activities, spread of new construction materials and components, and the challenges of environmental sustainability, has become so comlex that traditional ways of managing the process are no longer sufficient. What is more, architectural works are required to be ever more performing and integrated - holistic. The paradigm of collaborative design is gaining ground as a way of dealing with these problems. Various process/ product models have been proposed over the years, making more or less use of advanced tools. In this field this study proposes a model in which operators from various cultural contexts are each supported by Intelligent Assistants (agents). The model simulates the design of works of architecture to the best professional practice. Exchange of information and knowledge between the operators is essential to enhance the design process. From this follows the need to interface not just data, but also meanings. This article shows how to improve communications between different applications, used by different operators, so as to integrate information and knowledge, whether formalised or not, in a project managed collaboratively by means of XML.
keywords	Collaborative Design; Design Process Model; Distributed Knowledge Bases; Semantic Interfaces; aecXML
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2005_300
id	sigradi2005_300
authors	Cavieres, Andrés P.; Marcelo Quezada G.
year	2005
title	Analysis of the possibilities offered by the application of parametric modeling technologies in the design processes shared between architects and industrial designers: The prefabricated house case.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 300-303
summary	Traditionally, the teaching of digital design systems has been focused on the operative learning of software. However, this almost exclusively technical approach has leaded to a partial view of these systems, as well suited platforms to exploration of project’s possibilities. Consequently their relevance as a base for project representation and therefore as a useful instrument for conceptual exploration for design and experimental research of their processes have been undervalued. On the other hand, this restrictive perspective results in an important waste of the teaching possibilities lying in CAD software related with interdisciplinary teamwork. The following academic experience obeys to a new insight of how to teach these tools, based upon problem solving in Design by interdisciplinary students work teams from Architecture and Industrial Design. In this bet, the learning process is flexible, shared and collaborative, according to the requirements of each project, powered by the commitment of facing common goals. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	2005_607
id	2005_607
authors	Coppola, C., Calabrese, A., Iazzetta, A., Mele, F. and Talamo, O.
year	2005
title	The Transformation’s Control and Development
doi	https://doi.org/10.52842/conf.ecaade.2005.607
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 607-614
summary	The study of DNA of artifact and the development leading to its use in the field of industrial production of a single piece is now a common feature in the syllabus of the degree in Industrial Design at Faculty of Architecture “Luigi Vanvitelli” of SUN. The Generative Design Laboratory is where this process is carried out and includes the PROGEOR project for Generative Jewels Design. The experience acquired in the Generative Design Laboratory has developed along the lines of THE SINGLE PIECE, a product which combines the uniqueness of a handcrafted artefact with mass production methods. The development of project control technologies and also production technologies enables real-life experimentation of these hypotheses to be conducted.
keywords	Generative Model Design, Ontology, Agents
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2005_463
id	sigradi2005_463
authors	Costa Cabral, Cláudia Piantá
year	2005
title	Computer City, 1994
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 463-467
summary	This paper is about an emblematic design of the sixties, Dennis Crompton’s Computer City, published in 1964 by Archigram Magazine. Besides other enterprises of its time, Archigram promoted a critical view over institutionalised post-war modernism for not being able to recognize the emergence of new social realities, identified with the new technologies of automation and information, the restructuring of capitalist fordism and the shift from a predominantly industrial culture to an electronic culture. This paper sustains that more than a direct translation of unquestionable technical necessities; it was a conscious attempt of producing a sort of representation of technology. Crompton’s design clearly demonstrates the actual change in the character of technology, when it is no longer primarily identified with artefacts and objects, as the machine, and seems to be progressively identified with abstract and ubiquitous systems and processes of control, as automation and information systems. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ecaadesigradi2019_027
id	ecaadesigradi2019_027
authors	Erzetic, Catherine, Dobbs, Tiara, Fabbri, Alessandra, Gardner, Nicole, Haeusler, M. Hank and Zavoleas, Yannis
year	2019
title	Enhancing User-Engagement in the Design Process through Augmented Reality Applications
doi	https://doi.org/10.52842/conf.ecaade.2019.2.423
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 423-432
summary	Augmented Reality (AR) technologies are often perceived as the most impactful method to enhance the communication between the designer and the client during the iterative design process. However, the significance of designing the User Interface (UI) and the User Experience (UX) are often underestimated. To intercede, this research aims to employ new and existing techniques to develop UI's, and comparatively assess "the accuracy and completeness with which specified users can achieve specified goals in particular environments" (Stone, 2005) - a notion this research delineates as 'effectiveness'. Prompted by the work of key scholars, the developed UI's were assessed through the lens of existing UI evaluation techniques, including: Usability Heuristics (Nielsen, 1994) and Visual and Cognitive Heuristics (Zuk and Carpendale, 2006). In partnership with PTW Architects, characteristics such as the rapidity and complexity of interactions, in conjunction with the interface's simplicity and intuitiveness, were extracted from 15 trials underwent by architectural practitioners. The outcomes of this research highlights strategies for the effective development of user interface design for mobile augmented reality applications.
keywords	User Interface; Human Centered Design; User Experience; Heuristics; Usability Inspection Method
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	sigradi2005_097
id	sigradi2005_097
authors	Luhan, Gregory A.
year	2005
title	At Full-Scale \| From Installation to Inhabitation
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 97-102
summary	In 1999, the University of Kentucky (then the College of Architecture, now the College of Design-School of Architecture) established a Digital Design Studio to combine the strong tradition of handcrafting in the existing design program with those technologically sophisticated tools shaping the profession for the 21st century. Over a six-year period, this all-digital design studio has developed from a pedagogical model for developing new different ways of seeing and making architecture to a proof-of-concept real-world experience to coalesce state-of-the-art visualization techniques with current expectations of practice. Creating dynamic links between students, industry, and the profession has enabled the School of Architecture to provide leadership for practicing architects, to create an effective dialogue between industrial and design professionals, and to incorporate successfully leading-edge design pedagogy with the more technological applications that will shape the future of architecture practice. The materials presented here reflect a sequence of comprehensive digital projects produced under my direction from 1999 through 2005.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2005_1_13_236
id	cf2005_1_13_236
authors	MITCHELL William J.
year	2005
title	Constructing Complexity
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 41-50
summary	Buildings were once materialized drawings, but now, increasingly, they are materialized digital information - designed and documented on computer-aided design systems, fabricated with digitally controlled machinery, and assembled on site with the assistance of digital positioning and placement equipment. Within the framework of digitally mediated design and construction we can precisely quantify the design content and the construction content of a project, and go on to define complexity as the ratio of added design content to added construction content. This paper develops the definitions of design content, construction content, and complexity, and explores the formal, functional, and economic consequences of varying the levels of complexity of projects. It argues that the emerging architecture of the digital era is characterized by high levels of complexity, and that this enables more sensitive and inflected response to the exigencies of site, program, and expressive intention than was generally possible within the framework of industrial modernism.
keywords	assembly, complexity, construction, design, fabrication, uniformity, variety
series	CAAD Futures
last changed	2006/11/07 07:27

_id	sigradi2005_433
id	sigradi2005_433
authors	Muñoz, Patricia Laura; Juan López Coronel
year	2005
title	Looking at CAD from Morphology
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 433-437
summary	Our knowledge on Morphology of Industrial Design was increased through its relation to CAD systems. It was not just a functional change, because there was an integration of conceptual and operational morphological knowledge with 3D modelling systems. Over almost ten years of research we identified three different stages: exploration, surpassing of restrictions and expansion. We worked mainly in the generative systems of curve spatial surfaces and on their determination and communication, combining both digital and analogous resources. Throughout these stages we were able to understand CAD systems as instruments of inquiry that enable morphological explorations that would be unfeasible without them. If we can look beyond their visualizing faculties we can enter this challenging research area that will allow us to broaden the vision and scope of our discipline. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2005_1_68_34
id	cf2005_1_68_34
authors	PETZOLD Frank and BÜRGY, Christian
year	2005
title	Hands Free: A Wearable Surveying System for Building Surveying
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 351-360
summary	Activities in the building industry in Europe concentrate increasingly on a combination of renovation and new-building. A prerequisite for comprehensive IT supported design and planning in the context of existing buildings is both the use of on-site computer- aided surveying techniques and the integration of all professional disciplines in an integrated information and communication system. The starting point is often the building survey on site. An examination of currently available IT tools and hardware shows insufficient support for planning within existing built contexts. Surveying equipment has been derived from other disciplines without being modified to cater for the specific needs of building surveying. This paper describes a concept for computer-aided digital building surveying equipment based upon a wearable computer and AR to close the gap between specialist equipment adapted for use in building surveying and the need for simple straightforward surveying equipment for architects and engineers.
keywords	building surveying, wearable computing, HCI, industrial design, systems engineering
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2005_237
id	2005_237
authors	Schink, Claus-Jürgen, König, Holger and Krines, Manfred
year	2005
title	The “BASYS”-house - From a Research Project to Practice - a house in a day
doi	https://doi.org/10.52842/conf.ecaade.2005.237
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 237-243
summary	From 2000 to 2002 a building system was developed within an applied research project for creating individual planned, but widely prefabricated building- elements consisting of “Brettstapelholz”. These are massive wood elements, fabricated by a CNC-machine. Two years later the results were transferred to the building industry. Most of the developed innovations had been adapted, the virtual enterprise worked together spatially separated via a common internet platform. The building elements developed by the architect were used. Although working properly, the complete integration of the CAD/CAM chain hadn’t been completely adapted. The house was shown at the “Bau”-exhibition in Munich. The following day it was mounted 350 km far from Munich and finished at the same day. Overall, it took only one day to mount the house, from the bottom to the roof. The article will show the building system and discuss the experiences gained by transferring research to industry.
keywords	Multidisciplinary Design for Sustainability, CAD-CAM, Massive Wood Construction, Industrial Production of Buildings, Sustainable Construction, Low-eMission Buildings, Virtual Enterprise, Integral Planning Process
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaadesigradi2019_253
id	ecaadesigradi2019_253
authors	Velandia Rayo, Diego Alejandro
year	2019
title	Option One-second Iteration - Analysis, evaluation and redesign of a rural housing prototype
doi	https://doi.org/10.52842/conf.ecaade.2019.1.187
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 187-194
summary	In 2005, the rural housing deficit in Colombia was 1,600,000 units, which is equivalent to 68.25% of the total households. This very high number shows the difficulties faced by public policies on rural housing. This deficit is partly due to logistical problems related to the supply of materials and complexity in construction processes. It is necessary to explore new alternatives to offer more and better homes at lower costs. The research project presented in this manuscript started in 2013 as an initiative to reduce the housing deficit. It proposed to build a rural housing prototype integrating digital manufacturing processes. The performance of part of the structural and enclosing system was evaluated during a first iteration process to include changes in a second iteration later. With the adjustments to the design process discussed here, the prototype is expected to be built and tested to measure its efficiency and functioning.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	2005_083
id	2005_083
authors	Agostinho, Francisco Santos
year	2005
title	Architecture as Drawing, Perception and Cognition
doi	https://doi.org/10.52842/conf.ecaade.2005.083
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 83-90
summary	This work is about realizing that human perception is inherent to architecture. It is an asset and a trait subject to training and development in an empirical way, involving physical and manual action. It cannot be taught literally through convention and logic reasoning. It is a human achievement of great significance built on intellectual and scientific knowledge. It is something, being physical and empirical, that is supported on instrumental procedure. The computer, as a machine and an instrument, does not shorten the empirical experience of manipulation; on the contrary, it enhances J.J. Gibson’s findings about the perception of space in relation to eye and body movement. Being a cybernetic machine the computer may, and shall, evolve, and become perceptive. In order for that to happen, it is important to keep in mind the mechanism of human perception. Through producing a computerized model of a major architectural work, we develop natural knowledge about its physical features and the thought that lies underneath. To be able to use the computer as an instrument provides a user with explicit knowledge about its ways and mechanism that has to be made available. It involves training, which is to a great extent self-explanatory, and also explicit knowledge about the conventions that are being used, such as programming, reasoning and trigonometry.
keywords	Visualization; Environmental Simulation; Knowledge Modelling (KM); 3D Modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2005_a_8c_b
id	caadria2005_a_8c_b
authors	Alejandro Arismendy Echeverri
year	2005
title	Time-based computer aided architectural research for mapping techniques in multicultural space re-definitions.
doi	https://doi.org/10.52842/conf.caadria.2005.444
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 444-450
summary	This paper shall explore the process of research for the development of time-based computer aided applications as an alternative for mapping techniques. As part of an on going research, it was determined the necessity of implementing computer design strategies for time-based mapping due to the complexity and real-time variability of multicultural societies within its chrono-geo-ghraphical constrains for architectural space re-definitions.
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: