Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	2005_000
id	2005_000
authors	Duarte, José Pinto, Ducla-Soares, Gonçalo and Sampaio, A. Zita (Eds.)
year	2005
title	Digital Design: The Quest for New Paradigms
doi	https://doi.org/10.52842/conf.ecaade.2005
source	23nd eCAADe Conference Proceedings [ISBN 0-9541183-3-2], Lisbon (Portugal) 21-24 September 2005, 880 p.
summary	As the field of computer-aided design evolved over the last thirty years or so, it has witnessed five changes of emphasis in research direction. In the first stage, the use of computers in architecture focused on the development of Computer Aided Design (CAD), that is, systems that simulated the use of drafting tools, and research was mainly concerned with the satisfaction of designers' ergonomic needs. In the second stage, there were efforts to use computer tools in non-graphical aspects of designing, such as the use of Data Base Management Systems (DBMS) in the quantity survey of buildings. The concern was to satisfy the cognitive needs of designers by focusing on the way information and knowledge were perceived, acquired, stored, and processed. In the third stage, the focus shifted to the development of realistic models of buildings to permit the assessment of design proposals. In the fourth stage, the focus was on studies concerned with the encoding of architectural knowledge into design tools (KBMS), and the discussion was whether to go towards design automation or design supporting tools. In the fifth stage, with the advent of the Internet and the development of communication tools, research became focused on the collaborative and social aspects of design activity. In recent years, research also became concerned with the exploration of the physical implications of digital media in the production of artefacts. Today, there is a vast range of research interests and approaches, but the quest for new, unifying paradigms continues.
series	eCAADe
type	normal paper
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
doi	https://doi.org/10.52842/conf.ecaade.2005.331
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2005_1_44_228
id	cf2005_1_44_228
authors	BURRY Jane, BURROW Andrew, AMOR Robert and BURRY Mark
year	2005
title	Shared Design Space
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 217-226
summary	Collaborative design activity that involves remote multilateral, multidisciplinary communication has become more commonplace with the electronic means to communicate across any distance in real time. The communication itself can be both an important repository of project information and an important part of the process of conceptualisation and design development. This research has explored the apparent shortcomings inherent in commonly used means of communication and how these impact on the design process. This paper describes research that has taken as a starting point the analysis and observation of actual design communication from the archive of an internationally published collaborative project involving disciplinarily diverse and globally scattered participants. Through the analysis, we have identified characteristics of communication tools or information environments that would address the particular issues found to impede collaboration while fostering those aspects that support it. The findings have been used to inform the design, specification and implementation of collaborative information spaces based on Wiki software.
keywords	collaborative design, communication, design process, digital media, computer mediated communication
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2005_211
id	2005_211
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2005
title	The Quest for the Holy Grail – Holistic Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2005.211
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 211-218
summary	Architectural design, due to phenomena such as globalisation of the construction process, delocalisation of professional and industrial activities, spread of new construction materials and components, and the challenges of environmental sustainability, has become so comlex that traditional ways of managing the process are no longer sufficient. What is more, architectural works are required to be ever more performing and integrated - holistic. The paradigm of collaborative design is gaining ground as a way of dealing with these problems. Various process/ product models have been proposed over the years, making more or less use of advanced tools. In this field this study proposes a model in which operators from various cultural contexts are each supported by Intelligent Assistants (agents). The model simulates the design of works of architecture to the best professional practice. Exchange of information and knowledge between the operators is essential to enhance the design process. From this follows the need to interface not just data, but also meanings. This article shows how to improve communications between different applications, used by different operators, so as to integrate information and knowledge, whether formalised or not, in a project managed collaboratively by means of XML.
keywords	Collaborative Design; Design Process Model; Distributed Knowledge Bases; Semantic Interfaces; aecXML
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2005_a_7b_d
id	caadria2005_a_7b_d
authors	Jane R. Burry, Andrew L. Burrow, Mark C. Burry
year	2005
title	Upholding the Poetic in Design Collaboration
doi	https://doi.org/10.52842/conf.caadria.2005.288
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 288-299
summary	Design is a fundamentally collaborative activity. It commonly calls on a wide range of expertise and is arguably most effective when all contributions can be considered from an early and highly conceptual phase of the process. The sharing of information, particularly in a process that, at its best, involves collective conceptualisation is complicated by the very close and reciprocal relationship between the partial knowledge about the object of design and the mode of expression or representation of these ideas. As the design process and its numerous inputs, iterations and interrelationships become embedded in the communications; knowledge capture, management and access become central issues. This paper will selectively recount some of the substantive evidence for the characteristics of communication environments most supportive to design collaboration. In response to these findings it will introduce the use of wiki as the basis of an environment to provide this support, provide more detailed examples of the ways in which wiki has been adopted in early collaborative experiments and describe the developments currently being implemented, and how these are being tested in use.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2005_a_1b_c
id	caadria2005_a_1b_c
authors	Ju-Hung Lan, Mao-Lin Chiu
year	2005
title	Information Mining to Enhance Shared Understanding in Collaborative Architectural Design
doi	https://doi.org/10.52842/conf.caadria.2005.083
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 83-93
summary	This research focuses on how to enhance shared understanding in collaborative design from information point of view. The data mining techniques are applied to discover the design semantic patterns with information classification and association capabilities. A system prototype with an information visualization tool is developed to demonstrate the capability of enhancing shared understanding in collaborative design.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2005_293
id	sigradi2005_293
authors	Oh, Sooyeon; Wookhyun Yeo, Katsumi Tanaka
year	2005
title	Comparative Navigation System for Collaborative Architectural Design
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 293-299
summary	As information technology continues to evolve, it is affecting all creative art forms by providing new tools and surroundings, such as virtual environments. 3D real-time simulation environments strongly support communication and navigation, enabling users to collaborate on designs using centralized or distributed environments. The persons concerned must understand the proposed design. Systems that help them gain this understanding are therefore required. An effective concept for gaining understanding is comparison. However, comparing one design proposal with another using existing systems is difficult because the users must consider their viewpoints separately. In this paper, we describe the concepts, strategies, and functions of a 3D virtual design environment for collaborative, real-time architectural design that is based on our 3D comparative navigation system and real-time simulation technology. We also evaluate the advantages and disadvantages of using this design environment to support collaborative architectural design.
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	2005_373
id	2005_373
authors	Ucelli, Giuliana, Conti, Giuseppe and De Amicis, Raffaele
year	2005
title	Shape Knowledge Embedded in a Collaborative Virtual Design Environment for Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2005.373
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 373-381
summary	VR-based design environment have been traditionally not connected to companies’ design repositories and knowledge management systems. Till now these tools are mainly used for the initial exploration of innovative and original three-dimensional spaces and curves. Our approach encourages the use of VRbased design environments as design tools from where to reuse design solutions and to access design information, which are stored in internal repositories. This vision goes towards the development of a VR-based integrated design platform. Further, today’s knowledge management systems show evident limitations when dealing with multimedia files and 3D models. In order to overcome this limitation a framework for embedding in our VR-based design environment a Knowledge Management system for multimedia content has been developed and it is here described. Our solution implies the use of annotation languages such as the recent MPEG7 ISO/IEC (Multimedia Content Description Interface) standard for metadata, which is based on the XML language. Data types handled in our system are multimedia formats including text, audio, video, images, and 3D models. The main contribution of our research activity is in providing an innovative and original approach for supporting the design process, which takes advantage both of the visualization and design capabilities of virtual reality technology and of the reuse of design solutions directly in VE, through the retrieval of 3D models and multimedia data from various sources.
keywords	Virtual Reality, Collaborative Architectural Design, Design Reuse, Content Retrieval
series	eCAADe
email
last changed	2022/06/07 07:57

_id	2005_010
id	2005_010
authors	Aish, Robert
year	2005
title	From Intuition to Precision
doi	https://doi.org/10.52842/conf.ecaade.2005.010
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 10-14
summary	Design has been described as making inspire decisions with incomplete information. True, we may use prior knowledge, we may even think we understand the causalites involved, but what really matters is exploration: of new forms, of new materials, and speculation about the response to the resulting effects. Essentially, this exploration has its own dynamics, involving intuition and spontaneity, and without which there is no design. But of course we all know that this is not the whole story. Design is different to 'craft'; to directly 'making' or 'doing'. It necessarily has to be predictive in order to anticipate what the consequence of the 'making' or 'doing' will be. Therefore we inevitably have to counter balance our intuition with a well developed sense of premeditation. We have to be able to reason about future events, about the consequence of something that has not yet being made. There is always going to be an advantage if this reasoning can be achieved with a degree of precision. So how can we progress from intuition to precision? What abstractions can we use to represent, externalize and test the concepts involved? How can we augment the cognitive processes? How can we record the progression of ideas? And, how do we know when we have arrived? Design has a symbiotic relationship with geometry. There are many design issues that are independent of any specific configurations. We might call these “pre-geometric” issues. And having arrived at a particular configuration, there may be many material interpretations of the same geometry. We might call these “post-geometric” issues. But geometry is central to design, and without appropriate geometric understanding, the resulting design will be limited. Geometry has two distinct components, one is a formal descriptive system and the other is a process of subjective evaluation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	2005_131
id	2005_131
authors	Bailey, Rohan
year	2005
title	Digital Tools for Design Learning
doi	https://doi.org/10.52842/conf.ecaade.2005.131
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
summary	There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords	Design Education, Digital Design, Teaching Tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_763
id	2005_763
authors	Beilharz, Kirsty
year	2005
title	Architecture as the Computer Interface: 4D Gestural Interaction with Socio-Spatial Sonification
doi	https://doi.org/10.52842/conf.ecaade.2005.763
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 763-770
summary	Architecture today extends far beyond designing building shells and material, peripheral boundaries. Arguably, it has always been, and shifts increasingly in contemporary environments towards, designing space and interaction with space. Hence, the role of the designer includes integration of computing in architecture through ambient display and non-tactile interaction. This paper explores a framework in which the architecture is the computer interface to information sonification. (Sonification is automatically generated representation of information using sound). The examples in this paper are Emergent Energies, demonstrating a socio-spatially responsive generative design in a sensate environment enabled by pressure mats; Sensor-Cow using wireless gesture controllers to sonify motion; and Sonic Kung Fu which is an interactive sound sculpture facilitated by video colour-tracking. The method in this paper connects current information sonification methodologies with gesture controller capabilities to complete a cycle in which gestural, non-tactile control permutes and interacts with automatically-generated information sonification. Gestural pervasive computing negotiates space and computer interaction without conventional interfaces (keyboard/mouse) thus freeing the user to monitor or display information with full mobility, without fixed or expensive devices. Integral computing, a blurring of human-machine boundaries and embedding communication infrastructure, ambient display and interaction in the fabric of architecture are the objectives of this re-thinking.
keywords	Interactive Sonification, Gesture Controllers, Responsive Spaces, SpatialSound
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2005_a_7a_d
id	caadria2005_a_7a_d
authors	Chieh-Jen Lin, Mao-Lin Chiu
year	2005
title	Ontology Based Design Knowledge Detective Agent
doi	https://doi.org/10.52842/conf.caadria.2005.239
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 239-250
summary	Design knowledge abstracted from cases is important for designers. This paper is aimed to build an agent to detect those correlations between explicit features of design cases and relevant design problems. Using the data mining algorithm, we have accumulated a list of keywords about design problems and their relevant concept from textual information of a case library, and established their semantic ontology by clustering their semantic and sentence structural relations from previous studies. Meanwhile, we also established another hierarchical ontology of explicit design case features by applying design domain knowledge. Then, through mapping semantic relations of relevant keywords between two ontologies, the system will become more sensitive to the correlations of design case features and relevant design problems. Finally, a graphical interface is built to visualize these correlations and help user to recognize useful design knowledge cached in design cases.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	2005_483
id	2005_483
authors	Datta, Sambit
year	2005
title	The Generation of Superstructure Geometry in Latina Temples: A Hybrid Approach
doi	https://doi.org/10.52842/conf.ecaade.2005.483
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 483-488
summary	The Nâgara tradition of temple building created a rich corpus of Latina (single-spired) temples spread across Northern India between the fifth and thirteenth centuries. Computing methods offer a distinct methodology for reconstructing the genesis and evolution of geometry in this tradition over time. This paper reports a hybrid technique, comprising three distinct computations for recovering and explaining the geometry of temples. The application of the technique enables scholars to bring together fragments of evidence, construe “best-fit” strategies and unearth implicit or hidden relationships. The advantage of this approach is that changes in assumptions and testing of geometric alternatives can be easily simulated from multiple sources of information, such as texts, sacred diagrams and individual temples.
keywords	Generative Design: 2D Representation; 3D Modeling; Visualization; Constraint Based Design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2005_547
id	2005_547
authors	Elger, Dietrich and Russell, Peter
year	2005
title	Crisis? What Crisis?
doi	https://doi.org/10.52842/conf.ecaade.2005.547
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 547-556
summary	The paper describes the current situation concerning career opportunities in the field of architecture in developed western countries. Several aspects that are almost universal mark this situation. Firstly, there are too many architects chasing traditional work in competition with structural (civil) engineers. This is not surprising in consideration of the fact, that the architectural education industry produces far too many new architects for the economy to absorb. In Germany, the number is almost three times too many. Secondly, the needs of the building industry have changed over the past twenty years so that the skills that architects want to offer are not necessarily those that are sought. Lastly, the constant specialisation of work has continued unabated. Architects, as generalists, have idly watched their areas of expertise be usurped from neighbouring fields like civil and structural engineering The reasons for this crisis are manifold. In the schools of architecture, the discussions often deal with form or formal arguments, which, in fact, have little or no relevance to the building industry. This position was tenable so long as the clients were willing to accept formal arguments in order to receive buildings of high quality or current social relevance (i.e. current architectural fashion). With the dual aspects of globalisation and a shift to maintaining building stocks rather than producing new buildings, the tolerance for “architectural” discussions has been reduced even further. Indeed, the monetary pressures overwhelm almost all other aspects, including so-called green issues. What is more, most of the monetary issues are time based. Time represents, perhaps, the largest pressure in any current planning project. The clients expect expedient, accurate and inexpensive solutions. If architects are not able to produce these, the clients will (and do) go elsewhere. The authors argue that there remain serious problems to be solved for architects and the metier in general. Ever cheaper, ever faster and ever encompassing information technologies offer the architectural community a chance to turn recent trends on their head. By using information technologies to their full potential, architects can reassert themselves as the coordinators of building information and processes. Simply put, this means less photorealistic rendering and more databases, which may be unappealing for those architects who have positioned themselves as “designers” and are able to talk long on form, but short on cost or logistics. Nonetheless, the situation is not lost, so long as architects are able to recognise what is desired from the point of view of the client and what is desired from the point of view of the architect. It is not a question of one or the other. Architects must be able to offer innovative design solutions that not only address the fiscal, legal and programmatic constraints, but also push the boundaries at to the position of architecture in the community at large. For educators, it must be made clear that the real potential architects possess is their encompassing knowledge of the building process including their expertise concerning questions of architectural form, function, history and art. Precisely while they are generalists are architects invaluable in a sea of specialists. The biggest hurdle to asserting this in the past has been the control of the vast amounts of information. This is no longer a problem and also no longer an excuse. In the education of architects, it must be made clear that their role dictates sovereignty over architectural information. Architectural Information Management is a necessary skill alongside the more traditional architectural skills. A brief outlook as to how this might come about is detailed in the paper. The authors propose didactic steps to achieve this. Primarily, the education of computer supported planning should not simply end with a series of lectures or seminars, but culminate in integrated Design Studios (which including Design-Build scenarios).
keywords	Architectural Information Mangement, Computer Supported Design Studios, CSCW
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia05_184
id	acadia05_184
authors	Fineout, Matthew G.
year	2005
title	The Tower of Babel: Bridging Diverse Languages with Information Technologies
doi	https://doi.org/10.52842/conf.acadia.2005.184
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 184-191
summary	New digital tools or information technologies are providing the means for architects to realize unprecedented architectural creations. Unfortunately, the promise these technologies hold is far from their potential expression in the built physical environment. A contributing cause to this disjunctive state is the multiplicity of languages and knowledge sets employed by the various team members or actors engaged in a building project. From the cost models of the owners to the shop drawings of the fabricators, each actor views the project in terms specific to their individual discipline. In order to successfully engage the building process, these new technologies must account for this condition and develop means in which to span across traditional boundaries. This paper will examine the disjointed and fractured nature of the building project and identify opportunities for the deployment of information technologies to bridge boundaries, ultimately providing for and delivering architectural projects of unparalleled precedence. Specific aspects inherent to these technologies will be examined to understand where their application may benefit the building process. The key attributes this paper will focus on include: visualization tools, centralized database, cross discipline platform tools and novel forms of information representation. A case study of an architectural project will serve as the means in which to study the successful implementation of these attributes and their resulting impact on the design process and building project. This study will demonstrate how information technologies can be implemented within the multifaceted framework of conventional building projects to yield a project of unprecedented form.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	sigradi2005_327
id	sigradi2005_327
authors	Fukuda, Tomohiro; Atsuko Kaga
year	2005
title	Development of 3Dblog: VR-blog system which supports network collaboration
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 327-332
summary	We developed a “3Dblog” system which cooperated seamlessly with various media, such as a 3-dimensional virtual space (3DVS) showing environmental design, and texts and pictures expressing concepts relevant to a design, incidental information, and the minutes, etc. This system is one in which the weblog (blog) and Virtual Reality (VR) were combined smoothly. It is possible to peruse information relevant to a space or to comment in articles written using the blog serving as a 3-dimensional icon, and displaying in 3-dimensional virtual space. In this research, the system was applied to the design of a city square in Japan in which the persons involved in various positions participated with systems development.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	b3f6
authors	Goodwin, G.
year	1997
title	Software and hardware summary
source	Automation in Construction 6 (1) (1997) pp. 29-31
summary	With the rate of change accelerating in both technological development and in the spread of global markets, very few cost cutting businesses will survive in a value added marketplace. Information sharing over networks has a lot to offer the Industry by way of eliminating delays from the construction process and inventory from the Supply Chain. The most significant change by 2005 will be in networking and communications. Discovering design flaws at the design stage rather than when the building is in use must be very attractive to clients of the Construction Industry. Construction firms must have some sort of IT Strategy or clear view of how to exploit IT to support their businesses. Large companies need to act as coaches and mentors to smaller ones. The Industry cannot maximise its IT benefits unless all the players participate.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	2005_467
id	2005_467
authors	Guéna, François
year	2005
title	Assisting 3D Modeling from Documents
doi	https://doi.org/10.52842/conf.ecaade.2005.467
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 467-476
summary	This paper presents research in computer modeling that ARIAM team of the school of architecture of Paris La Villette has been developing for several years. One of the aims of this research group is to develop computer systems that assist architects in modeling existing buildings or monuments from heterogeneous documents or data as drawings plans, sections, photos, measures taken on site etc. In spite of advances in computer recognition it’s a long way to have a system that could automatically recognize, from any bitmap document or photo, relevant architectural objects and automatically build the model these documents represent. However, if we could define a knowledge base about a particular domain, it would be possible to develop a system that could interpret specific documents that represent some kind of building or monuments. But, even in such limited domain, it is difficult to build an exhaustive knowledge base and user-interactions are generally required. We argue that a user could mark relevant information on the documents and thus facilitate the process of interpreting. The system we propose has three components: a graphical user interaction tool, an analyzer of documents and user interactions, and a generative tool that produces the required model. As an illustration, the paper presents a system we have developed which assists an architect in modeling a 3D mesh of gothic vaults for a finite elements analysis.
keywords	3D Modeling; Restitution; Knowledge Base System; Meshing; Gothic Vaults
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: