Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	acadia05_226
id	acadia05_226
authors	Biloria, N., Oosterhuis, K. and Aalbers, C.
year	2005
title	Design Informatics
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 226-235
doi	https://doi.org/10.52842/conf.acadia.2005.226
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for envisaging complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This design-research approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. The hence extorted ‘point cloud’ configuration serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed script-routines, iteratively run calculations to generate steel-wireframes, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct hence enabling timely and effective construction of the conceptualized form.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2005_829
id	2005_829
authors	Boeykens, Stefan and Neuckermans, Herman
year	2005
title	Scale Level and Design Phase Transitions in a Digital Building Model
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 829-836
doi	https://doi.org/10.52842/conf.ecaade.2005.829
summary	Research and development on Computer Aided Architectural Design often focuses on simulating a building as a digital model. Our research on the early design stages explores concepts we feel are lacking in current design tools and research projects. Building models are usually static models, serving as a snapshot of the design. We aim to support design phase and scale level transitions, to better support the workflow of the designer. This paper formulates our approach at supporting transitions in an integrated design environment for architecture.
keywords	CAAD, Architectural Modeling, Design Process
series	eCAADe
email
last changed	2022/06/07 07:52

_id	2005_547
id	2005_547
authors	Elger, Dietrich and Russell, Peter
year	2005
title	Crisis? What Crisis?
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 547-556
doi	https://doi.org/10.52842/conf.ecaade.2005.547
summary	The paper describes the current situation concerning career opportunities in the field of architecture in developed western countries. Several aspects that are almost universal mark this situation. Firstly, there are too many architects chasing traditional work in competition with structural (civil) engineers. This is not surprising in consideration of the fact, that the architectural education industry produces far too many new architects for the economy to absorb. In Germany, the number is almost three times too many. Secondly, the needs of the building industry have changed over the past twenty years so that the skills that architects want to offer are not necessarily those that are sought. Lastly, the constant specialisation of work has continued unabated. Architects, as generalists, have idly watched their areas of expertise be usurped from neighbouring fields like civil and structural engineering The reasons for this crisis are manifold. In the schools of architecture, the discussions often deal with form or formal arguments, which, in fact, have little or no relevance to the building industry. This position was tenable so long as the clients were willing to accept formal arguments in order to receive buildings of high quality or current social relevance (i.e. current architectural fashion). With the dual aspects of globalisation and a shift to maintaining building stocks rather than producing new buildings, the tolerance for “architectural” discussions has been reduced even further. Indeed, the monetary pressures overwhelm almost all other aspects, including so-called green issues. What is more, most of the monetary issues are time based. Time represents, perhaps, the largest pressure in any current planning project. The clients expect expedient, accurate and inexpensive solutions. If architects are not able to produce these, the clients will (and do) go elsewhere. The authors argue that there remain serious problems to be solved for architects and the metier in general. Ever cheaper, ever faster and ever encompassing information technologies offer the architectural community a chance to turn recent trends on their head. By using information technologies to their full potential, architects can reassert themselves as the coordinators of building information and processes. Simply put, this means less photorealistic rendering and more databases, which may be unappealing for those architects who have positioned themselves as “designers” and are able to talk long on form, but short on cost or logistics. Nonetheless, the situation is not lost, so long as architects are able to recognise what is desired from the point of view of the client and what is desired from the point of view of the architect. It is not a question of one or the other. Architects must be able to offer innovative design solutions that not only address the fiscal, legal and programmatic constraints, but also push the boundaries at to the position of architecture in the community at large. For educators, it must be made clear that the real potential architects possess is their encompassing knowledge of the building process including their expertise concerning questions of architectural form, function, history and art. Precisely while they are generalists are architects invaluable in a sea of specialists. The biggest hurdle to asserting this in the past has been the control of the vast amounts of information. This is no longer a problem and also no longer an excuse. In the education of architects, it must be made clear that their role dictates sovereignty over architectural information. Architectural Information Management is a necessary skill alongside the more traditional architectural skills. A brief outlook as to how this might come about is detailed in the paper. The authors propose didactic steps to achieve this. Primarily, the education of computer supported planning should not simply end with a series of lectures or seminars, but culminate in integrated Design Studios (which including Design-Build scenarios).
keywords	Architectural Information Mangement, Computer Supported Design Studios, CSCW
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ascaad2012_003
id	ascaad2012_003
authors	Elseragy, Ahmed
year	2012
title	Creative Design Between Representation and Simulation
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary	Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed	2012/05/15 20:46

_id	2005_115
id	2005_115
authors	Oxman, Rivka and Rotenstreich, Ruth
year	2005
title	Conceptual Content of Digital Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 115-121
doi	https://doi.org/10.52842/conf.ecaade.2005.115
summary	Concepts related to digital architecture have begun to occupy a central role in current architectural discourse. Design concepts that have been the conceptual content of this discourse are now becoming integrated into the general architectural discourse. The research reports on this process of the emergence, migration, and crystallization of a new conceptual structure over the past decade under the influence of digital design and its emerging conceptual structure. The research presented in this paper examines the emergence of new ideas in architectural thinking that are related to digital architecture since 1990 until today. In order to demonstrate this shift, we have selected a representative architectural building type that is strongly and directly influenced by the conceptual content of the cultural discourse in architecture. A museum type was selected to represent features of the expression that reflects the changes and evolution of conceptual structures that underlie digital design. The research methodology is based on a method known as “content analysis”. Content analysis in our research was de- fined as including textual material in books, book chapters, essays, articles, and historical documents. A new approach for Design Content Analysis was accomplished employing the ICF analytical framework. In order to conduct a content analysis the text was coded and was broken down into categories on a variety of theoretical design themes. Our findings demonstrate that certain expressions related to digital technology have moved up from a low level descriptive function to a significant conceptual role in formulating the design content of architectural design. In our paper we describe the research, methodology findings and contribution to the definition of the conceptual content of contemporary architectural discourse on digital architecture.
keywords	Digital Design, Digital Architecture, Content Analysis, Conceptual Design
series	eCAADe
email
last changed	2022/06/07 08:00

_id	2005_581
id	2005_581
authors	Wender, Katrin, Willenbacher, Heiko, Hübler, Reinhard and Donath, Dirk
year	2005
title	A Modular Navigation Layer for Information Retrieval in the Building Life Cycle
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 581-588
doi	https://doi.org/10.52842/conf.ecaade.2005.581
summary	One cause for the mostly inconsistent and incomplete transfer of data within the building life-cycle is the insular nature of currently available software solutions for building planning / facility management. An IT-supported integrative platform could ensure the integration not only of all planning participants and their respective tasks but also all phases of the building life-cycle. A platform of this kind must provide flexibility on several levels: modelling / administration, model integration and of course data navigation and information retrieval. Because of the uniqueness and long lifetime of buildings it is impossible to develop a comprehensive and generically applicable building model as well as information requirements occurring during the life-cycle cannot be precisely defined in advance. A basic feature of the proposed approach is the ability to modify the building model (i.e. data structure) at run-time of the system. As a fundamental requirement the navigation layer of the integrative platform must support a variety of search strategies and be open for the integration of new modules. We describe an approach for an integrated platform for information retrieval across the entire life cycle of a building using a digital building model as a basis. The system architecture developed for the data and integration layers is described and problems associated with information provision for supporting decisions are examined. Based on the demands identified, an approach for a navigation and online search layer is formulated.
keywords	Information Retrieval: Building Life Cycle, Building Model, Planning Process, Decision Process
series	eCAADe
email
last changed	2022/06/07 07:57

_id	2005_237
id	2005_237
authors	Schink, Claus-Jürgen, König, Holger and Krines, Manfred
year	2005
title	The “BASYS”-house - From a Research Project to Practice - a house in a day
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 237-243
doi	https://doi.org/10.52842/conf.ecaade.2005.237
summary	From 2000 to 2002 a building system was developed within an applied research project for creating individual planned, but widely prefabricated building- elements consisting of “Brettstapelholz”. These are massive wood elements, fabricated by a CNC-machine. Two years later the results were transferred to the building industry. Most of the developed innovations had been adapted, the virtual enterprise worked together spatially separated via a common internet platform. The building elements developed by the architect were used. Although working properly, the complete integration of the CAD/CAM chain hadn’t been completely adapted. The house was shown at the “Bau”-exhibition in Munich. The following day it was mounted 350 km far from Munich and finished at the same day. Overall, it took only one day to mount the house, from the bottom to the roof. The article will show the building system and discuss the experiences gained by transferring research to industry.
keywords	Multidisciplinary Design for Sustainability, CAD-CAM, Massive Wood Construction, Industrial Production of Buildings, Sustainable Construction, Low-eMission Buildings, Virtual Enterprise, Integral Planning Process
series	eCAADe
email
last changed	2022/06/07 07:57

_id	acadia05_200
id	acadia05_200
authors	Tsou, J.-Y., Chan Yi Lee, Mak Kwok Pui, Ru Xu Du, Liang Jian, Yeung Kim
year	2005
title	Applying Scientific Simulation to Integrate Thermoelectric Conductor Module into Architectural Design – Smart Wall for Thermal Comfort
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 200-210
doi	https://doi.org/10.52842/conf.acadia.2005.200
summary	This paper presents the innovative architectural design concept, which is to integrate the new material and technology into the building design to achieve the thermal comfort and at the same time reduce the energy consumption of the building by making use of the renewable energy, including solar and wind energy. The system is developed based on the idea of regional thermal comfort in building. The advantage of the system is the environmental friendly approach, costless operation, reliability, flexibility, scalability and adaptability for the integration to the building design. With the design concept, we tried to do two application designs in two virtual sites. One is a badminton court for the 2008 Beijing Olympic Games and the other is a cooling pond in a shopping mall. We will introduce how computational simulation can contribute to the prediction of the performance of the design. We will also discuss how the computation simulation can help in the design optimization process. Through the development of the new design integration of the material to the building, we would like to feedback to the material industry to encourage further collaboration and development in the material enhancement, so that both industries and the society can benefit from the advancement.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia05_236
id	acadia05_236
authors	Brandt, Jordan
year	2005
title	Skin That Fits: Designing and constructing cladding systems with as-built structural data
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 236-245
doi	https://doi.org/10.52842/conf.acadia.2005.236
summary	An awkward interface exists between the structure and skin of complex architecture. The primary structure is typically allowed much higher tolerance ranges than that of the cladding industry, due primarily to the delicate nature of the building envelope which, above all, must prevent water penetration and meet the aesthetic requirements of the architect and client. As architecture has integrated advanced design and fabrication techniques to realize increasingly complex shapes, this problem has been aggravated because of the tangency requirements for high gloss curved finish surfaces and the larger variations found with rolled steel columns and undulating concrete forms. To date, most innovations in this area have been focused upon mechanical connections that can be adjusted and shimmed, thus requiring increased design engineering and on-site labor costs for effective implementation. It would be preferable to manufacture cladding components that are properly adjusted to the actual site conditions, negating the need to predict and accommodate potential dimensional variation with complex connections. The research provides a model for implementing long distance laser scanning technology to facilitate a real-time parametric BIM, herein called an Isomodel.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2005_211
id	2005_211
authors	Carrara, Gianfranco and Fioravanti, Antonio
year	2005
title	The Quest for the Holy Grail – Holistic Collaborative Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 211-218
doi	https://doi.org/10.52842/conf.ecaade.2005.211
summary	Architectural design, due to phenomena such as globalisation of the construction process, delocalisation of professional and industrial activities, spread of new construction materials and components, and the challenges of environmental sustainability, has become so comlex that traditional ways of managing the process are no longer sufficient. What is more, architectural works are required to be ever more performing and integrated - holistic. The paradigm of collaborative design is gaining ground as a way of dealing with these problems. Various process/ product models have been proposed over the years, making more or less use of advanced tools. In this field this study proposes a model in which operators from various cultural contexts are each supported by Intelligent Assistants (agents). The model simulates the design of works of architecture to the best professional practice. Exchange of information and knowledge between the operators is essential to enhance the design process. From this follows the need to interface not just data, but also meanings. This article shows how to improve communications between different applications, used by different operators, so as to integrate information and knowledge, whether formalised or not, in a project managed collaboratively by means of XML.
keywords	Collaborative Design; Design Process Model; Distributed Knowledge Bases; Semantic Interfaces; aecXML
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2005_603
id	sigradi2005_603
authors	Castañé, Dora; Claudio Deho, Adrián Barcesat, Carlos Tessier
year	2005
title	Urbamedia: the design of an integrated system of urban-building visualization and communication
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 603-608
summary	This paper presents the advancements of the Urbamedia project which was designed as part of a research program at the Center CAO (Creation computer assist), School of Architectural Design and Urbanism, University of Buenos Aires, which was led by the valued master and advisory professor Architect Arturo F. Montagu. This proposal of the city of Buenos Aires on the Mayo Avenue expands the original historical fragment presented between the following two referenced representative landmarks: The Two Congresses Square and the Mayo Square. It continues with the advancement of methodologies and techniques implemented in a system of “integrated visualization and communication” for the development of a VRML (Virtual Reality Modeling Language) 3D virtual non-immersive and interactive vision. It also incorporates the development of a “foundation of digitally integrated knowledge” with fragments of central areas from other surrounding cities as well as interfaced phenomenological situations. The application of digital VRML technology has allowed for thoroughly researching the processes through dynamic simulation of specific urban fragments (Mayo Avenue within Buenos Aires) and the cities that are also participating in the project. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2006_545
id	caadria2006_545
authors	DIETRICH ELGER, ANDREAS DIECKMANN, PETER RUSSELL, THOMAS STACHELHAUS
year	2006
title	THE INTEGRATED DESIGN STUDIO: A VIEW BEHIND THE SCENES:Liquid Campus 3
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 545-548
doi	https://doi.org/10.52842/conf.caadria.2006.x.v4r
summary	Over 10 months ending in July 2005, architecture students from Aachen, Karlsruhe and Weimar took part in a design studio that differed significantly from other studios in that the result of the studio was a 1:1 realisation of the design. This is part of an evolution of the virtual faculty of architecture “Liquid Campus”, founded in 2001, which has seen the complexity of the projects steadily rise and this continued in the Project “Ein Fest: Ein Dach”. The integrated studio is arranged to encourage an active, economic and transparent learning process, which encompasses design, communication and cooperation issues. The stated goal at the beginning of the two-semester process is to build and although only a few of the ideas are realised, all participants are involved in the realisation. In this case, the project was to create “roofs” for an open-air concert for 200,000 people in Karlsruhe, Germany. The planning was carried out using the Netzentwurf platform, with which the authors have several years experience.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	2005_107
id	2005_107
authors	Fricker, Pia, Ochsendorf, Mathias and Strehlke, Kai
year	2005
title	GENERATIVE INTERFACES AND SCENARIOS - INTERACTION IN INTELLIGENT ARCHITECTURE
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 107-113
doi	https://doi.org/10.52842/conf.ecaade.2005.107
summary	New media and modern building automation have a strong impact on contemporary architecture. So far one could regard built architecture as static. These new technologies introduce a dynamic impulse to architecture. The objective of our research and teaching work is to demonstrate the impact of innovative systems on architecture in daily usage while providing building automation, multimedia integration and facility management services in intelligent networked buildings. These technologies, as described in this paper are integrated in our second year course for students of Architecture. By designing an interactive graphical interface for the lab they were asked to create a spatial scenario as a self running Flash animation. Thus real space is merged with virtual reality.
keywords	CAAD Curriculum, Human-Computer Interaction, Web-Based Design, Building Automation, Generative Graphical Interfaces
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:50

_id	caadria2005_a_7c_d
id	caadria2005_a_7c_d
authors	Jin Yeu Tsou, Jie He, Yucai Xue
year	2005
title	An Open Space with Scenery: ‘Greenscape Index’ for Performance Based Planning of High Density Urban Habitation
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 328-334
doi	https://doi.org/10.52842/conf.caadria.2005.328
summary	This paper presents an improvement of the original openness ratio concept, which has been formulated as an integrated index for early-stage urban open space planning and design support. The ‘greenscape index’ is a rating system which quantitatively integrates human visual perception with the visible landscape resources to evaluate the visual quality of open space vision within high-density urban environment. This new index is expected to provide more comprehensive environmental performance consideration criteria for urban planning and design. The research team also discusses the potential of the introducing this index to assess both psychological preference and physical form of urban open spaces. The new concept also has shown its feasibility on integrating key environmental considerations in visual sensitivity, urban wind, urban noise and solar heat gain into simple massing study which is applicable in the preliminary planning stage.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	2005_695
id	2005_695
authors	Kouzeleas, Stelios Th.
year	2005
title	Definition of a Method of Limits of the Simplification of a Hall Model in a CAD System to Diminish Falsification of Acoustic Simulation Results
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 695-704
doi	https://doi.org/10.52842/conf.ecaade.2005.695
summary	During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi- EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
keywords	Calculation Cad Program Integrated Development ; Design Process ; 3D Modeling ; Performance Simulation ; Acoustic Simulation Results
series	eCAADe
email
last changed	2022/06/07 07:52

_id	2005_147
id	2005_147
authors	Lai, Ih-Cheng
year	2005
title	Infilling Time into Space - A Pedagogical Approach for Evolving Space Using Digital Media
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 147-154
doi	https://doi.org/10.52842/conf.ecaade.2005.147
summary	This paper presents a pedagogical approach to explore the relationships between time and space by using digital media. Based on a pedagogical model called e-Space proposed by Lai (2004), we apply motion as a spatial issue to approach this study. Through integrating with the characteristics of digital media, students are encouraged to evolve architectural space and form by decomposing, re-organizing, interpreting and realizing the spatial composition. Simultaneously, diverse digital media applications integrated with design thinking in a design process enables students to bridge two design spaces - physical and virtual. This process introduces the students to a new approach of design-creation and form finding. Finally, we use an advanced digital media course as an example to understand the impacts of the pedagogical approach. The students’ outcomes are also reported in this paper
keywords	Digital Media, Pedagogy, Motion, Design Space, Design Learning
series	eCAADe
email
last changed	2022/06/07 07:52

_id	2006_168
id	2006_168
authors	Papalexopoulos, Dimitris
year	2006
title	Digital Territories and the Design Construction Continuum
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 168-174
doi	https://doi.org/10.52842/conf.ecaade.2006.168
summary	The purpose of the paper is to bring together the two newly elaborated concepts of Digital Territories (DT) and Design Construction Continuum (DCC) in order to approach the design of evolving – intelligent environments.Digital Territories is a concept elaborated 2005 by a Core Expert Group, conceived as an ephemeral Ambient Intelligence (AmI) space. DTs formed through the interconnection of physical objects embedding digital technologies, postulate the integration of the physical and the digital world, searching for operative definitions of new evolving in time functionalities. In DT’s, bridges between the physical and the digital are discrete elements disposing of certain autonomy in their conception and internal structure. Bridges have to be designed and located. The DCC proposes to relate design, fabrication and construction through information networks (it is in fact a DT). Through the DCC approach, design information is becoming construction information and industrial fabrication information. The DCC has to integrate interaction design and respond to questions posed by DTs design. DTs are integrated to DCC by constituting an intermediate level between building programming and design. Intelligent Building Components, that is AmI components operating as bridges between the physical and the digital in Digital Territories formations, cooperating to develop swarm intelligence applications to architectural space, are elements managed by the DCC. DT’s are about spaces communicating and the DCC is about communicating (design) space.
keywords	Digital Territories; Design Construction Continuum; Interaction Design; Evolving Environments; Intelligent Environments; Location Diagrams; Building Programming
series	eCAADe
email
last changed	2022/06/07 08:00

_id	cf2005_1_68_34
id	cf2005_1_68_34
authors	PETZOLD Frank and BÜRGY, Christian
year	2005
title	Hands Free: A Wearable Surveying System for Building Surveying
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 351-360
summary	Activities in the building industry in Europe concentrate increasingly on a combination of renovation and new-building. A prerequisite for comprehensive IT supported design and planning in the context of existing buildings is both the use of on-site computer- aided surveying techniques and the integration of all professional disciplines in an integrated information and communication system. The starting point is often the building survey on site. An examination of currently available IT tools and hardware shows insufficient support for planning within existing built contexts. Surveying equipment has been derived from other disciplines without being modified to cater for the specific needs of building surveying. This paper describes a concept for computer-aided digital building surveying equipment based upon a wearable computer and AR to close the gap between specialist equipment adapted for use in building surveying and the need for simple straightforward surveying equipment for architects and engineers.
keywords	building surveying, wearable computing, HCI, industrial design, systems engineering
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	955b
id	955b
authors	Rafi, A
year	2005
title	Information and communication technology (ICT) and intelligent cities: A Malaysian experience
source	In Mao-Lin, C. (Ed.), CAAD talk 4: Insights of digital cities (pp. 229-248), Taipei, Taiwan: Archidata
summary	This paper reports on Malaysian’s experience in suggesting and maintaining two cybercities (i.e. Putrajaya and Cyberjaya) or Intelligent Cities. The advantage of the convergence of technology has been implemented at national level as a means to increase human participation and to prosper in the Digital Age, in their daily life, business, education and other urban activities. It starts with an overview of ‘High-tech Corridors’ in Asia countries namely Philippines, Thailand, South Korea, and Singapore and its impact to these countries. The foundation of this study presents the criteria of Intelligent Community (IC) that makes a city intelligent without excluding the value of the citizen quality of life, culture and religion by associating with the Information and Communications Technology (ICT). We introduce and present www.i-Putra.com.my, a portal of digital soft city of Malaysia’s new administrative Capital, Putrajaya. This national project is funded by Putrajaya Holdings Sdn. Bhd. Malaysia and was originally developed by the Multimedia University before finally executed by I-Design Sdn. Bhd. It is designed to be an interactive channel to provide the services for different level of target audiences of the civic and urban activities. The guiding principle for i-Putra.com.my portal is content, context, community and commerce in which they will be integrated with the city information such as residential, commercial, service and public areas. It is hoped that this paper gives an example of good intelligent city concepts through a clear vision and planning, effective management, implementation and sustainable approach.
keywords	intelligent city, intelligent community (IC), ICT, High-tech Corridors
series	book
type	normal paper
email
last changed	2007/09/13 03:39

For more results click below: