Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 546

Reformat results as: short short into frame detailed detailed into frame

_id	ijac20053104
id	ijac20053104
authors	Fischer, Thomas
year	2005
title	Teaching Programming for and with Microcontroller-Enhanced Physical Models
source	International Journal of Architectural Computing vol. 3 - no. 1, 57-74
summary	As processes of use, interaction and transformation take center stage in various fields of design, electronic sensors, controllers, displays and actuators can significantly enhance the value of physical models. These technologies allow the development of novel computer interfaces for new kinds of interaction with virtual models, and in the future they can be expected to play an important role in the development of new types of active building components and materials for automated construction and dynamic runtime adaptations of inhabitable environments. However, embedding programmed logic into physical objects involves skills outside the traditional domains of expertise of designers and model makers and confronts them with a steep learning curve. The wide variety of alternative technologies and development tools available in this area has a particularly disorienting effect on novices. However, some early experiences suggest that mastery of this learning curve is easily within reach, given some basic introduction, guidance and support. To assist design students in acquiring a basic level of programming knowledge, better educational programming tools are still required. It is the intent of this paper to provide designers and educators with a starting point for explorations into this area as well as to report on the development of an educational approach to electronics programming called haptic programming.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2005_558
id	sigradi2005_558
authors	Carlos, Juliano; Cecílio Batista Oliveira
year	2005
title	Dismissible packings of this atomic and electronic age
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 558-563
summary	Discuss concepts of urban nomadic and the revision of the contemporary habitation, from the reading of recent architectural proposals. It presents alterations of the international architecture after years 60, as the introduction of new medias in the domestic space and the life in society – the television, the radio, the communications for satellite and the computer – and boom technological with the production of new materials for the civil construction – the mega-structures in steel, new types of plastic, etc… - and the consequent unfoldings in the contemporary architecture. Analyze two works of the English group Archigram, (middle of 60), relating them with the production of three European offices in activity today. It concludes pointing future trends in the conception and production of the habitation, as the real necessity of its plastic, programmatical and technician-constructive rediscussion, searching to take care of the real necessities of its user, through special flexibility and plurifuntionality, beyond the incorporation of new technologies. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ijac20053201
id	ijac20053201
authors	Aitcheson, Robert; Friedman, Jonathan; Seebohm, Thomas
year	2005
title	3-Axis CNC Milling in Architectural Design
source	International Journal of Architectural Computing vol. 3 - no. 2, 161-180
summary	Physical scale models still have a role in architectural design. 3-axis CNC milling provides one way of making scale models both for study purposes and for presentation in durable materials such as wood. We present some types of scale models, the methods for creating them and the place in the design process that scale models occupy. We provide an overview of CNC milling procedures and issues and we describe the process of how one can creatively develop appropriate methods for milling different types of scale models and materials. Two case studies are presented with which we hope to convey not only the range of possible models that can be machined but also the way one creatively explores to arrive at appropriate milling strategies. Where apposite, we compare 3-axis CNC milling to newer technologies used for rapid prototyping but rapid prototyping is not a primary focus.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2005_731
id	sigradi2005_731
authors	Albornoz Delgado, Humberto Ángel; Laura Talía Escalante Rodríguez, Leticia Gallegos Cazares
year	2005
title	Didactic Design: light and optics for preschool level
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 731-737
summary	Since 2003, we have been developing a pedagogic proposal and didactic material for teaching Light and Optics to kindergarden children that enhances the construction of the first scientific thinking schemes. The design (industrial and graphic) applied to this project has generated an educational product composed of 44 objects. These materials allow teaching concepts such as: combination of colors, light indispensable to see, formation of shadows and images are not objects. These have been developed as inciters of curiosity, capable to awake the innate restlessness of children, achieving to stimulate their creativity. The purpose is to explore knowledge and construct their own ideas; enrich their experiences and inquire a reality that was drawn grey and tedious, generating a process of manipulation-action and then representation-conceptualization. This product has been successfully used as a pilot test in a kindergarden, reflecting significant gains in students’ science learning. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia05_000
id	acadia05_000
authors	Ataman, Osman (Ed.)
year	2005
title	Smart Architecture: Integration of Digital and Building Technologies
doi	https://doi.org/10.52842/conf.acadia.2005
source	Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8, ISavannah (Georgia) 13-16 October 2005, 259 p.
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry.
series	ACADIA
email
more	http://www.acadia.org
last changed	2022/06/07 07:49

_id	sigradi2005_190
id	sigradi2005_190
authors	Ataman, Osman
year	2005
title	The digital architecture of tomorrow
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 190-193
summary	This paper presents an ongoing research project about the development of the materials and fabrication techniques for a fundamentally new class of architectural composite. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
series	SIGRADI
last changed	2016/03/10 09:47

_id	ijac20053202
id	ijac20053202
authors	Ataman, Osman
year	2005
title	Integrating Digital and Building Technologies: Towards a New Architectural Composite
source	International Journal of Architectural Computing vol. 3 - no. 2, 181-190
summary	This paper presents an ongoing research project about the development of the materials and fabrication techniques for a fundamentally new class of architectural composite. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	acadia05_058
id	acadia05_058
authors	Daveiga, José and Ferreira, Paulo
year	2005
title	Smart and Nano Materials in Architecture
doi	https://doi.org/10.52842/conf.acadia.2005.058
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 58-67
summary	We describe and analyze the fields of Smart and Nano Materials and their potential impact on architectural design and building fabrication. Distinguishing Smart and Nano materials, Smart Materials perform both sensing and actuating operations, whereas many Nano materials are capable of self-assembly. In general, Smart and Nano materials can perform like living systems, simulating human skin, the body’s muscles, a leaf’s chlorophyll and self-regeneration. Recognizing that the traditional partition between Materials Science and Architecture is obsolete, our intent is to show how these two fields are intrinsically connected, while growing evermore symbiotic as we progress into the futureKeeping the designer in mind, our paper begins with the question: “What Nano and Smart materials can be used in future architectural designs?” Outlining what such materials might mean for architectural fabrication and design, we claim that Smart and Nano Materials can imitate living organisms. Effective implementation of these materials will therefore allow designed spaces to operate as active organs within a larger dynamic organism, synthesizing both expressive intent and pragmatic considerations. This paper is a collaboration between an architect and a materials scientist on the future of materials and their influence in architecture. By giving examples of work already underway we intend to illustrate and suggest directions ranging from the functional to the expressive, from tectonics to morphology. We conclude with a reflection on the importance of future research between our two areas of knowledge.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ecaaderis2018_103
id	ecaaderis2018_103
authors	Davidová, Marie and Prokop, Šimon
year	2018
title	TreeHugger - The Eco-Systemic Prototypical Urban Intervention
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 75-84
keywords	The paper discusses co-design, development, production, application of TreeHugger (see Figure 1). The co-design among community and trans-disciplinary participants with different expertise required scope of media mix, switching between analogue, digital and back again. This involves different degrees of physical and digital 'GIGA-Mapping' (Sevaldson, 2011, 2015), 'Grasshopper3d' (Davidson, 2017) scripting and mix of digital and analogue fabrication to address the real life world. The critical participation of this 'Time-Based Design' (Sevaldson, 2004, 2005) process is the interaction of the prototype with eco-systemic agency of the adjacent environment - the eco-systemic performance. The TreeHugger is a responsive solid wood insect hotel, generating habitats and edible landscaping (Creasy, 2004) on bio-tope in city centre of Prague. To extend the impact, the code was uploaded for communities to download, local-specifically edit and apply worldwide. Thus, the fusion of discussed processes is multi-scaled and multi-layered, utilised in emerging design field: Systemic Approach to Architectural Performance.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	ecaade2018_k02
id	ecaade2018_k02
authors	Ingarden, Krzysztof
year	2018
title	Between Critical Regionalism, Neo-vernacularism and Localised Modernism - Three projects of Ingarden & Ewy.
doi	https://doi.org/10.52842/conf.ecaade.2018.1.017
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 17-24
summary	In the 70s-80s Kenneth Frampton, defined the phenomenon of "critical regionalism" in contemporary architecture. He pointed out that the most interesting objects arise at the threshold between local and global architecture. These are objects that are open to modern technology in various fields of science, and at the same time remain rooted in the local tradition of building , thus to create a space that is approved and understood locally. The article presents two examples of buildings (the Ma³opolska Garden of Arts in Krakow and the Polish Pavilion EXPO 2005 Aichi in Japan, Europe - Far East Gallery in Krakow) that look for their individual contextual sources, turn to experiments with traditional materials, try to find lost threads of handicraft tradition, and at the same time reach for modern technologies with respect for the natural and cultural environment.
keywords	wicker facade; building material experiments; experimental architecture; Polish architecture
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cdc2008_243
id	cdc2008_243
authors	Loukissas, Yanni
year	2008
title	Keepers of the Geometry: Architects in a Culture of Simulation
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 243-244
summary	“Why do we have to change? We’ve been building buildings for years without CATIA?” Roger Norfleet, a practicing architect in his thirties poses this question to Tim Quix, a generation older and an expert in CATIA, a computer-aided design tool developed by Dassault Systemes in the early 1980’s for use by aerospace engineers. It is 2005 and CATIA has just come into use at Paul Morris Associates, the thirty-person architecture firm where Norfleet works; he is struggling with what it will mean for him, for his firm, for his profession. Computer-aided design is about creativity, but also about jurisdiction, about who controls the design process. In Architecture: The Story of Practice, Architectural theorist Dana Cuff writes that each generation of architects is educated to understand what constitutes a creative act and who in the system of their profession is empowered to use it and at what time. Creativity is socially constructed and Norfleet is coming of age as an architect in a time of technological but also social transition. He must come to terms with the increasingly complex computeraided design tools that have changed both creativity and the rules by which it can operate. In today’s practices, architects use computer-aided design software to produce threedimensional geometric models. Sometimes they use off-the-shelf commercial software like CATIA, sometimes they customize this software through plug-ins and macros, sometimes they work with software that they have themselves programmed. And yet, conforming to Larson’s ideas that they claim the higher ground by identifying with art and not with science, contemporary architects do not often use the term “simulation.” Rather, they have held onto traditional terms such as “modeling” to describe the buzz of new activity with digital technology. But whether or not they use the term, simulation is creating new architectural identities and transforming relationships among a range of design collaborators: masters and apprentices, students and teachers, technical experts and virtuoso programmers. These days, constructing an identity as an architect requires that one define oneself in relation to simulation. Case studies, primarily from two architectural firms, illustrate the transformation of traditional relationships, in particular that of master and apprentice, and the emergence of new roles, including a new professional identity, “keeper of the geometry,” defined by the fusion of person and machine. Like any profession, architecture may be seen as a system in flux. However, with their new roles and relationships, architects are learning that the fight for professional jurisdiction is increasingly for jurisdiction over simulation. Computer-aided design is changing professional patterns of production in architecture, the very way in which professionals compete with each other by making new claims to knowledge. Even today, employees at Paul Morris squabble about the role that simulation software should play in the office. Among other things, they fight about the role it should play in promotion and firm hierarchy. They bicker about the selection of new simulation software, knowing that choosing software implies greater power for those who are expert in it. Architects and their collaborators are in a continual struggle to define the creative roles that can bring them professional acceptance and greater control over design. New technologies for computer-aided design do not change this reality, they become players in it.
email
last changed	2009/01/07 08:05

_id	2005_155
id	2005_155
authors	Mullins, Michael, Kirkegaard, Poul Henning, Jessen, Rasmus Zederkof and Klitgaard Jens
year	2005
title	A Topology Optimization Approach to Learning in Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2005.155
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 155-162
summary	Topology optimization methods offer an interesting tool for architects and engineers as a rational basis for the choice of a structure’s initial form, particularly as developments in computer software are compatible with this approach. This can be argued from ecology, resource savings, static load design, financial and a number of other pragmatic reasons. But in an artistic/architectural perspective these are not decisive. Analogical design qualities include a tectonic appreciation of the properties of materials, metaphoric interpretation of intention and considerations of context. The paper describes an attempt to unify analytic and analogical approaches in an architectural education setting, using topology optimization software. It uses as examples recent student projects where the architectural design process based on a topology optimization approach has been investigated. The paper describes and presents results obtained by the students during the project. Further, a discussion is delivered concerning the improved understanding of tectonic design obtained by the student during the projects.
keywords	Architectural Education, Topology Optimization, Tectonic Design
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2005_321
id	sigradi2005_321
authors	Almeida da Silva, Adriane Borda; Ana Lúcia Pinho Lucas, Ricardo Silveira
year	2005
title	Defining a process of design and learning of digital graphics by means of distance education
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 321-326
summary	This paper describes and analyses the teaching/learning approach which progressively is being established in the context of the Digital Graphics Post-Graduation Course. The method used has, basically, generated educational situations able to increase the self-learning capacity of the students; develop skills for collaborative activities to build the knowledge and overtake the limits of time and space imposed by traditional educational systems. The theoretical references adopted to draw the didactic situations are explained, these situations include more and more moments of distance learning, synchronous or asynchronous, redefining the attitude of lecturers and students. This work points out the introduction of a tutor, an agent to promote interactions among student/lecturer/object of knowledge; and the investment on production of didactic material specific to digital graphics is emphasized between lecturers and students, exploring collaborative activities to the distance learning modality. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20053308
id	ijac20053308
authors	Anders, Peter
year	2005
title	Cybrid Principles: Guidelines for Merging Physical and Cyber Spaces
source	International Journal of Architectural Computing vol. 3 - no. 3, 391-406
summary	This article introduces seven principles for the design of mixed reality compositions. Contrasting the novelty of mixed reality technology, we have derived these principles from basic needs served by traditional architecture as well as those that have arisen since the introduction of information technologies. These principles draw also from research in cognitive science, human-computer interface design and the recognition of the multivalent, psychosomatic nature of space.
series	journal
more	http://www.ingentaconnect.com/search/expand?pub=infobike://mscp/ijac/2005/00000003/00000003/art00009
last changed	2007/03/04 07:08

_id	ijac20053205
id	ijac20053205
authors	Kacher, Sabrina; Halin, Gilles; Bignon, Jean-Claude; Humbert, Pascal
year	2005
title	A method for Constructing a Reference Image Database to Assist with Design Process. Application to the Wooden Architecture Domain
source	International Journal of Architectural Computing vol. 3 - no. 2, 227-244
summary	Designing architectural projects requires the introduction of references, because design is an activity oriented towards a result which does not yet exist. If we summarise the current categories used in Artificial Intelligence to characterise the different forms of reasoning, we are able to consider that design is more the concern of the induction or the abduction mechanism than the deduction mechanism. Moreover, the main characteristic of the designer's activity is to work towards non-routine situations with the use of many references. In this paper we will present method principles to construct a reference image database. These references will enable the designer to further in solving the design problem. To illustrate these reference usage, we choose photographic images belonging to the wooden construction domain We also present at the end of the paper an experiment which aims to evaluate the real help that this reference image database can bring to designers during their creation task.
series	journal
last changed	2007/03/04 07:08

_id	2005_055
id	2005_055
authors	Moloney, Jules
year	2005
title	Game Engines and Virtual Design Studios
doi	https://doi.org/10.52842/conf.ecaade.2005.055
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 55-62
summary	A discussion of the outcomes from the use of a game engine based collaborative virtual environment for virtual design studios. By way of introduction the use of a game engine is positioned between the high end visualization capabilities of immersive VR, and the high dimensional accuracy of 3D CAD. Software development, which address problems related to content creation and communication lag, are reported. This is supplemented with a more general discussion of the motivations for design collaboration between architectural schools. We confer with other researchers that lack of engagement is more related to pedagogy, then as a result of technical issues. In conclusion we discuss the potential of game play to enhance virtual design studios in terms of engagement and deliberation
keywords	Collaborative Virtual Environments, Game Engines, Pedagogy
series	eCAADe
email
last changed	2022/06/07 07:58

_id	5b89
id	5b89
authors	Sevaldson, Birger
year	2005
title	Developing Digital Design Techniques Investigations on Creative Design Computing
source	Oslo School of Architecture and Design, PHD-Thesis
summary	1.1. The themes in this theses 16 1.1.1. Mind the mind gap 16 1.1.2. Prologue: The World Center for Human Concerns 17 1.1.3. Creative computer use 26 1.1.4. Design strategies and techniques 31 1.2. Overview 33 1.2.1. Main issues 34 1.2.2. The material 36 1.2.3. The framework of this thesis 37 2. CURRENT STATE AND BACKGROUND 39 2.1. New tools, old thoughts. 39 2.1.1. A misuse strategy 44 2.1.2. Emergence in design 47 2.1.3. Programming and design 50 2.1.4. Artificial intelligence 53 2.1.5. Human intelligence and artificial representations 53 2.2. Electronic dreams 54 2.2.1. The dream of intuitive software 55 2.2.2. The dream of the designing machine 60 2.2.3. The dream of self-emerging architecture; genetic algorithms in design 61 2.2.4. A cultural lag 62 2.3. Ideas and ideology 64 2.3.1. A personal perspective on the theories of the 1990s 65 2.3.2. "The suffering of diagrams" 68 2.3.3. Architectural theory and design methodology 69 2.4. Ideas on creativity 72 2.4.1. What is creativity? 73 2.4.2. Creativity, a cultural phenomenon. 75 2.4.3. Creativity in the information age 79 2.4.4. Creativity-enhancing techniques 81 2.4.5. Crucial fiicro-cultures 82 2.4.6. A proposal for a practitioner approach to creativity 83 2.5. Summary and conclusion of part 2 84 3. NEW DESIGN TECHNIQUES 86 3.1. Introduction 86 3.2. New technology - new strategy 87 3.3. Thinking through design practice: the inspirational playful design approach 88 3.4. A Corner stone: emergence 89 3.4.1. The source material 94 3.5. Recoding, translation and interpretation 95 A case: Tidsrom 97 3.6. Reconfiguring schemata 109 3.7. Rules and games 113 3.8. Virtuality and virtual models 118 3.8.1. What is "The Virtual"? 118 3.8.2. Virtual reality 119 Investigating "the virtual" 120 3.8.3. Analysing the virtual 126 3.9. Visual thinking (diagrams and visual thinking) 130 3.9.1. Visual Thinking and Abstraction. 130 3.9.2. A heuristic process 132 3.9.3. Visual thinking, skills and tacit knowledge 132 3.9.4. Media for visual thinking 133 3.10. Diagrammatic thinking 138 3.10.1. Descriptive diagrams 142 3.10.2. Generative diagrams 144 3.10.3. Versioning 149 3.10.4. Finding 153 3.10.5. Translation and interpretation 158 3.10.6. From generative diagram to program 168 3.10.7. Dynamic generative diagrams 171 3.11. The question of selection 175 3.12. Summary and conclusion of part 3 178 4. WAYS OF WORKING: FROM DESIGN PRACTICE TOWARDS THEORY AND DIGITAL DESIGN METHODS 179 4.1. Introduction 179 4.1.1. Practice-based research 180 4.1.2. Visual material is central. 180 4.1.3. Two investigation paths 180 4.1.4. Achievements 180 4.2. Methods 181 4.2.1. Explorative and generative research 182 4.2.2. A first-person approach 183 4.2.3. Analysis 184 4.2.4. The Material 185 4.3. Systematising creative computer use. Ways of working; techniques in creative computer use. 186 4.3.1. Categorization 186 4.3.2. Mapping the field of design computing. 187 4.3.3. Generic techniques 190 4.3.4. Specific techniques 192 4.3.5. Table of techniques 193 4.3.6. Examples of techniques 200 4.3.7. Traces of technology. 213 4.4. The further use of the generated material 219 4.4.1. Realisation strategies 221 4.4.2. Templates and scaffolds 223 4.5. Summary of Part 4 240 PART 5. WAYS OF THINKING: INTENTIONS IN CREATIVE COMPUTER USE. 241 5.1. Intentions 241 5.1.1. Categorising intentions 242 5.2. Intention themes 243 5.2.1. Cases and samples from Group one: Formal, phenomenal, spatial and geometrical themes 244 5.2.2. Intentions of response to the complexity of urban systems 297 5.3. The Hybrid Process 317 5.3.1. Hybridization strategies 319 5.3.2. The hybrid process and its elements. 328 6. SUMMARY AND CONCLUSIONS 344 6.1. Principles, concepts and methods for creative design computing 344 6.2. A new type of creativity? 348 6.3. A practice as the field for an investigation 349 6.4. Suggestions for further studies 349
series	thesis:PhD
type	normal paper
last changed	2007/04/08 16:11

_id	sigradi2005_251
id	sigradi2005_251
authors	Socorro, Alberto Bravo de Laguna
year	2005
title	Introduction to the visualization in the computer through the teaching of the modern movement.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 251-256
summary	The paper makes reference to issues of communication and architectural visualization by means of computers in education. It also addresses issues of representation and the necessity for ethics and esthetic in the digital visualization of architecture. The presence of ethical issues in the architectural discourse of the modern movement, offers a fundamental framework for addressing the education on digital architectural representation. Objectives: 1. Use the architectural framework of rules generated by the modern movement and their representations, as a means for systematically explore the CAD language; 2. Study the visualization of architectural space through the visualization of modern space as for instance in the case of modern pioneers of the didactic model. // Observations: This educational strategy is not exclusive and does not resign to our present condition. It finds in the scope of the modern movement a suitable field of experimentation. Let us take advantage of our study of the modern pioneers as a safeguard on our sense of esthetic and ethics. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	2005_010
id	2005_010
authors	Aish, Robert
year	2005
title	From Intuition to Precision
doi	https://doi.org/10.52842/conf.ecaade.2005.010
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 10-14
summary	Design has been described as making inspire decisions with incomplete information. True, we may use prior knowledge, we may even think we understand the causalites involved, but what really matters is exploration: of new forms, of new materials, and speculation about the response to the resulting effects. Essentially, this exploration has its own dynamics, involving intuition and spontaneity, and without which there is no design. But of course we all know that this is not the whole story. Design is different to 'craft'; to directly 'making' or 'doing'. It necessarily has to be predictive in order to anticipate what the consequence of the 'making' or 'doing' will be. Therefore we inevitably have to counter balance our intuition with a well developed sense of premeditation. We have to be able to reason about future events, about the consequence of something that has not yet being made. There is always going to be an advantage if this reasoning can be achieved with a degree of precision. So how can we progress from intuition to precision? What abstractions can we use to represent, externalize and test the concepts involved? How can we augment the cognitive processes? How can we record the progression of ideas? And, how do we know when we have arrived? Design has a symbiotic relationship with geometry. There are many design issues that are independent of any specific configurations. We might call these “pre-geometric” issues. And having arrived at a particular configuration, there may be many material interpretations of the same geometry. We might call these “post-geometric” issues. But geometry is central to design, and without appropriate geometric understanding, the resulting design will be limited. Geometry has two distinct components, one is a formal descriptive system and the other is a process of subjective evaluation.
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: