Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 42

Reformat results as: short short into frame detailed detailed into frame

_id	acadia06_538
id	acadia06_538
authors	Senagala, Mahesh
year	2006
title	Light Exchange
doi	https://doi.org/10.52842/conf.acadia.2006.538
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 538-539
summary	The notions of collaborative exchanges, leadership, and entrepreneurialism that cross disciplinary boundaries were promoted in a digital design-build studio taught in spring 2005. With the starting funds of one dollar, the studio took up the challenge of building two full-scale tensile fabric structures that mark the entrances to a downtown San Antonio building. Structures of 1200 square feet total surface area were successfully designed, engineered, and executed within a semester framework at a final cost of $102,490. Collaborations were fostered with 24 industry partners from Asia, Europe, Australia, and USA, including four structural engineers. Innovative pedagogical, collaborative and project management methods were employed. The studio was structured as a self-organized design “firm.” Positions were created and students were “hired” into the firm to play different roles. The studio utilized web-based communication and project management tools. After a four-week warm-up project that established an innovative studio culture, professional schedules were prepared and the engineers were engaged in the collaborative process of designing the anchors, cables, connections and PTFE/PVC membranes. The peculiarities of digitally designing, fabricating and erecting tensile fabric structures were comprehensively explored. The studio completed all the CNC fabrication, concrete footings and membrane fabrication at local workshops through special partnerships.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	sigradi2005_731
id	sigradi2005_731
authors	Albornoz Delgado, Humberto Ángel; Laura Talía Escalante Rodríguez, Leticia Gallegos Cazares
year	2005
title	Didactic Design: light and optics for preschool level
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 731-737
summary	Since 2003, we have been developing a pedagogic proposal and didactic material for teaching Light and Optics to kindergarden children that enhances the construction of the first scientific thinking schemes. The design (industrial and graphic) applied to this project has generated an educational product composed of 44 objects. These materials allow teaching concepts such as: combination of colors, light indispensable to see, formation of shadows and images are not objects. These have been developed as inciters of curiosity, capable to awake the innate restlessness of children, achieving to stimulate their creativity. The purpose is to explore knowledge and construct their own ideas; enrich their experiences and inquire a reality that was drawn grey and tedious, generating a process of manipulation-action and then representation-conceptualization. This product has been successfully used as a pilot test in a kindergarden, reflecting significant gains in students’ science learning. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_089
id	sigradi2005_089
authors	Caldi, Leonardo
year	2005
title	Ethnomethodology and experience design
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 89-94
summary	Through a reading of the work of David Carson, this article seeks to shed light on certain contributions from ethnomethodology to experience design. Looking form better ways of communicating, Carson – himself a member of the skater and surfer communities with whom he wanted to communicate – advanced a new manner of doing graphic design, effectively challenging established paradigms of visual communication. In our view, Carson made use of ethnomethodology in a special way, based on intuition. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_063
id	sigradi2005_063
authors	Fernández, Roberto César
year	2005
title	Lúxive
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 63-68
summary	The subject of this digital art project is the process of erosion-sedimentation in general, and the leaching (process of separation of a contained soluble substance in an insoluble compound) in individual. In the name of the project one includes the light, since it is possible to ask themselves if there is a luminance erosion-sedimentation-leaching, or to try to establish an analogy between the natural leaching of the ground and the luminance radiations. Lúxive tries to generate a dialectic one with the process reality of the natural phenomenon, an atmosphere based on the time: it demands the apprehension of his temporary reality to be able to translate it from the imaginative activity. Lúxive does not try to imitate the erosion of the light, but to take elements from his to occur for reconstruct itself in forms to see and listen, from elements that conform the atmosphere in tacit form. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	sigradi2005_695
id	sigradi2005_695
authors	Geva, Anat; Andrew Garst
year	2005
title	The Holy light: a comparison of natural and artificial light in a sacred setting
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 695-699
summary	The design of sacred settings can attempt to enrich the inner spiritual experience of the Lord being the Light. It provides natural light to connect to the divine and artificial light to highlight the rituals associated with this connection. The paper attempts to compare these light effects in a sacred setting; and to utilize popular commercial graphic software in the analyses of these effects. Specifically, AutoCAD and Forum Z are utilized to investigate these differences in viewing the dome's fresco in the historic Church of St. Themonianos in Lysi, Cyprus and in the Byzantic Fresco Chapel in Houston, Texas. The study includes three parts: recreation of a digitized model of the historic church in Cyprus; analyses of light effects in both churches; and a comparison of light effects along accepted lighting guidelines. The conclusion of this examination is that both sources of light complement each other in their effects in sacred settings.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2005_144
id	sigradi2005_144
authors	Goldberg, Sergio Araya
year	2005
title	ICHTYOMORPH - Design and development of a fish-skin double façade system for freeform super tall buildings using Parametric Design Tools
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 144-149
summary	Parametric design implies a whole new paradigm of non standard design through the propagation of the difference, the repetition of variation. The ability to control variation and adaptation to local conditions allows more precise yet complex designs. This paper describes a research project designing double skin façade systems for tall buildings using a parametric approach. These designs are tested later through rapid prototyping techniques. This research aims its design towards an adjustable façade structure, articulated according to various complex geometrical conditions on the façade of a building. The skin is conceived as a light, flexible, reconfigurable composition responding to different criteria regarding the design, its environment or the program. It achieves this through different levels of control on different scales of the project, by embedding several layers of parametric features, which are nested one inside the other, in order to produce the overall rainscreen surface of the tower.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2005_b_3b_b
id	caadria2005_b_3b_b
authors	Jae Hwan Jung
year	2005
title	Algorithmic forest: A Study to Generate ‘Lighting-Revealing’ Structure by Algorithm
doi	https://doi.org/10.52842/conf.caadria.2005.061
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 61-70
summary	In today’s world of architectural design the use of computational technology as drawing and modeling tools is ubiquitous. However, the typical use of the computer as a design tool generally limits the creative aspect of architectural design. Incorporating algorithm can enhance traditional “manual” methods of CAD based design, as well as furthering human intellect in the field of architectural design. The research to be presented will demonstrate the potential benefits of algorithms by using them to design and generate a structure that creates variable lighting effects similar to those created by natural light shining through trees in a forest.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia05_142
id	acadia05_142
authors	Lee, Jaewook and Kalay, Yehuda E.
year	2005
title	Collaborative Design Approach to Intelligent Environments
doi	https://doi.org/10.52842/conf.acadia.2005.142
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 142-155
summary	Intelligent environments are buildings and other settings that can recognize the changing needs of their users and/or the changing nature of their context, and respond to them by adjusting some key environmental parameters (temperature, light, sound, furnishings, etc.). Unlike the currently common approach, which is based on systems theory (i.e., adjusting the parameters of the environment to match some pre-defined use profile), the approach proposed in this paper is based on dynamic, collaborative design: it views the (built) environment as comprised of multiple independent object-agents, each of which is responsible for one small aspect of the environment. Each can sense the immediate changes pertaining to its domain of responsibility, and propose corrective measures, which are negotiated with other agents to form a collective response. The paper hypothesizes that such an approach can be made more context-sensitive and dynamic, is easily scaleable, and can respond to the needs of multiple different users of the environment at the same time. The paper presents the rationale for developing the multi-agent approach, its hypothetical implementation, and its application to hypothetical case studies.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	acadia05_212
id	acadia05_212
authors	Luhan, Gregory A.
year	2005
title	Modern Translations, Contemporary Methods: DL-1_Resonance House®
doi	https://doi.org/10.52842/conf.acadia.2005.212
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 212-225
summary	As the first design-build-fabricate-assemble experiment at our school, the intent of the studio was to design a framework from which to examine a “lived space” through digital-to-digital processes. Moving from digital models and physical stereo lithographic models to hand-fabrication and digital assembly allowed the students to move from creation to completion. As part of our holistic design process, the studio fabricated almost all components for the project. These elements include the wood flooring, the copper and wood skins, the building’s structural panels, and the two-story light vortex. This single-family, in-fill house is located within an historic downtown neighborhood and is subject to historic district zoning regulations, design guidelines, and Board of Architecture Review approvals. The project is analogous to design challenges presenting themselves in historic districts throughout the United States including the Savannah, Georgia site for the 2005 ACADIA Conference. The scale of the project relates well to the horizontal nature of this context and after a formal, televised review process with the local Board of Architecture Review, the project represents a dynamic, yet sympathetic architectural dialogue with the surrounding buildings. The project develops simultaneously from the exterior and interior resulting in two courtyards that mediate the urban “front door” and the private “terrace.” The students designed these areas through a series of two-dimensional axonometric drawings, three-dimensional physical and digital models, and four-dimensional time-based animations. The building massing separates into two core elements: gabled copper volume and wood screen volume. These elements maintain their conceptual purity by using the same types of modulations on their skins. The copper form with its deep-cut reveals and proportionally placed light scoring patterns reflects the horizontal datum lines of the floor, sill, threshold, and ceiling. In contrast, the wood volume reflects these same lines as applied “shadow screens” which create depths that seamlessly tie together the side, rear, and front facades.The hinge point of the house is the light vortex. Designed in Rhino, translated in Catia, fabricated out of aluminum, and clad in stainless steel, this two-story sculptural element will literally wrap light around its surfaces. Like a sunflower, the light vortex, with its angel hair stainless steel finish, responds to the incremental differentiation of light throughout the day. Photosensitive floor-mounted lights designed to augment the volume of natural light will provide a continuous light rendition on the sculpture. The project, scheduled for completion at the end of the 2005 summer session, is at the time of this submission about 60% complete.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	sigradi2005_133
id	sigradi2005_133
authors	Luhan, Gregory A.
year	2005
title	From art to part \| DL-1_Resonance house®
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 133-138
summary	Moving from digital models and physical stereo lithographic models to hand-fabrication and digital assembly allowed the students to move from creation to completion. As part of our holistic design process, the studio fabricated almost all components for the project. These elements include the wood flooring and cantilevered staircase, the copper and wood skins, the building’s structural panels, and the two-story light vortex. This project—a single-family, in-fill house located within an historic downtown neighborhood—is subject to historic district zoning regulations, design guidelines, and Board of Architecture Review approvals. The students designed these areas through a series of two-dimensional plans and axonometric drawings, three-dimensional physical and digital models, and four-dimensional time-based animations. The building massing separates into two core elements: a gabled copper volume and a wood screen volume. The hinge point of the house is the light vortex. Photosensitive floor-mounted lights designed to augment the volume of natural light will provide a continuous light rendition on the sculpture. The project is scheduled for completion in October 2005.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	caadria2005_b_4b_d
id	caadria2005_b_4b_d
authors	Martin Tamke
year	2005
title	Baking Light: Global Illumination in VR Environments as architectural design tool
doi	https://doi.org/10.52842/conf.caadria.2005.214
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 214-228
summary	As proven in the past, immersive Virtual Environments can be helpful in the process of architectural design (Achten et al. 1999). But still years later, these systems are not common in the architectural design process, neither in architectural education nor in professional work. The reasons might be the high price of e.g. CAVEs, the lack of intuitive navigation and design tools in those environments, the absence of useful and easy to handle design workflows, and the quality constraints of real-time display of 3D models. A great potential for VR in the architectural workflow is the review of design decisions: Display quality, comfortable navigation and realistic illumination are crucial ingredients here. Light is one of the principal elements in architectural design, so design reviews must enable the architect to judge the quality of his design in this respect. Realistic light simulations, e.g. via radiosity algorithms, are no longer the domain of high-end graphic workstations. Today's off-the-shelf hardware and 3D-software provide the architect with high-quality tools to simulate physically correct light distributions. But the quality and impression of light is hard to judge from looking at still renderings. In collaboration with the Institute of Computer Graphics at our university we have established a series of regular design reviews in their immersive virtual environment. This paper describes the workflow that has emerged from this collaboration, the tools that were developed and used, and our practical experiences with global-light-simulations. We share results which we think are helpful to others, and we highlight areas where further research is necessary.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	781d
id	781d
authors	Mayer, Rosirene; Turkienicz, Benamy
year	2005
title	Generative Process of Oskar Niemeyer‘s Style
source	2005 Aesthetics and Architectural Composition. Proceedings of the Dresden International Symposium of Architecture 2004 (to appear in "pro Literatur Verlag", D-82291 Mammendorf ISBN: 3-86611-022-7 / Editors: Ralf Weber/Matthias Albrecht Amann/ TU Dresden
summary	The aim of this study is to outline the structure of a possible grammar of Oscar Niemeyer’s architectural language, focusing on the so-called “free forms.” The idea is to assess the extent to which it is possible to shed some light on the discussion of architectural freedom as used by many authors when describing the work of the Brazilian architect. The investigation associates geometric relations present in Niemeyer’s buildings to the Shape Grammar model as proposed by Stiny & Gips (1975). The model made possible the depiction of consistencies in vocabulary, rules and operations deployed by Niemeyer. This eventually led to the description of an original architectural language present in Niemeyer’s buildings.
keywords	Shape Grammars, Oskar Niemeyer, Generative process
series	other
type	symposium
email
last changed	2006/10/01 08:39

_id	sigradi2005_517
id	sigradi2005_517
authors	Medero Rocha, Isabel Amalia
year	2005
title	Architectural space between reality and virtuality: simulation or reality?
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 517-521
summary	This study was carried out under the Theory, Epistemology, and Philosophy principles, and is part of the PAAVI Project: The Architectural Design Process in Interactive Virtual Environments. The study presents part of the theory reference landmark that furnishes support in methodology and process approaches to the empirical research groundwork. The study also addresses the dimensions of architectural space and its representation in cyberspace. Comparisons are made between: static space/dynamic space – mathematical laws/architectural principles – interaction during the infographic process and formal manipulation of software – shape/form/function/space/void – distances/effects/rendering. The basic hypothesis is that the decisions made while solving architectural problems demand in-depth thought and ponderation. This is necessary in the light of the project theory, using the computer tools, electronic media, and concepts that structure different software. These software operations interfere in and interact with conception, appropriation, use and the esthetics of space and architectural form. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2016_154
id	ecaade2016_154
authors	Ozer, Derya Gulec and Nagakura, Takehiko
year	2016
title	Simplifying Architectural Heritage Visualization - AUGMENTEDparion
doi	https://doi.org/10.52842/conf.ecaade.2016.2.521
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 521-528
summary	Among other historical artifacts, architectural heritage is the most difficult to present in museums. There is a need for a high-tech visualization of cultural heritage since it is important to visualize, share and analyze data for stakeholders such as historians, archaeologists, architects and tourists. This study aims to represent architectural heritage in terms of photogrammetry and AR methods for the Parion Theater, Biga, Turkey, dates back to 1st-2nd century A.D. and has been under excavation since 2005. The study uses MULTIRAMA, a method previously developed by ARC Team (MIT) in 2013, which aims to represent the "unseen" to such users by visualising and documenting via an app. The method supports architectural heritage representation via the processes of, i) documentation, ii) data process and modeling, and iii) presentation. This holistic and low cost approach will focus on the problem of visualizing the digital architectural heritage, and led light to future projects of a historical visualization database throughout Turkey.
wos	WOS:000402064400052
keywords	Augmented Reality (AR); Cultural Heritage; Photogrammetry; Parion
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2005_390
id	sigradi2005_390
authors	Santos Cabral Filho, José dos
year	2005
title	Architecture and electronic music – body, image and time
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 390-393
summary	The attempts to correlate architecture and music are frequent and Schelling’s idea of architecture as fronzen music, although problematic, seems to prevail. This article proposes the update of these comparisons under the light of recent developments seen in the field of popular electronic music. Special considerations are made to the questions of authorship, the use of images and the bodily engagement of audiences. The immersive quality of both architecture and music is highlighted as one of the best possible grounds for comparing both disciplines. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	acadia05_036
id	acadia05_036
authors	Senagala, Mahesh
year	2005
title	Building is a Network for Living in: Toward New Architectures
doi	https://doi.org/10.52842/conf.acadia.2005.036
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 36-47
summary	Our societies today are beginning to think, communicate, interact and live differently as everything in the human world is beginning to be networked wirelessly at the speed of light with everything else in the world (including architecture). This article looks at the big picture and outlines a series of recent developments in digital technologies that would enable architecture to become sensate, supple and globally networked at the speed of light. New thinking, new commerce, new polity, and new architectures are emerging out of the apparently disparate yet closely related design and technological inventions. We are on the verge of moving from the outmoded notions of space and time to the post-spatial notion of sensate and supple space-time.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	sigradi2005_806
id	sigradi2005_806
authors	Torres, Gerson J. M
year	2005
title	Modeling and visualizing the architectural project and their relationship with the nature and the environment using Biocad and CAACD: Computer Architectural Aided Climatic Design
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 806-810
summary	Architecture is built in artificial and natural environments, some are real others are virtual. Until now, CAAD, CAD, and 3D modeling and simulation software have not included the environment and are therefore limited to imprecise representations. This challenges the algorithmic complexity of the software that simulates elements of nature, air, natural and artificial light using techniques of radiosity and raytracing. Today, CAACD (Computer Architectural Aided Climate Design) software needs information like geographic location, atmospheric and climatic conditions of the place to use it in conceptual decisions during the design process and to be able to guarantee environmental comfort in the project. This situation has provided me, together with professors and postgraduate students in the discipline of landscape architecture, with the fundamental framework for my study, namely: The virtual construction of a region, including digital representation of the built environment and the tropical flora. This paper describes the basic methodology used in such a process. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	acadia06_546
id	acadia06_546
authors	Williamson, Shane
year	2006
title	Stock Space
doi	https://doi.org/10.52842/conf.acadia.2006.546
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 546-547
summary	Modest in budget and ephemeral in nature, STOCK SPACE was installed, exhibited, and dismantled over a five-day period at the Toronto National Trade Center as part of an invited exhibition of concept spaces at the 2005 Toronto Interior Design Show. Occupying 450 square feet within an 110,000-square-foot convention center, STOCK SPACE was small, vertical, warm, and quiet, in contrast to the immense horizontality of the mechanically cooled trade floor of nearly 40,000 exhibitors and attendees. STOCK SPACE was an investigation of limits. Material had to fit through doors and on our CNC milling bed. It had to clear staircases, be carried by hand, and be stored compactly within the confines of our fabrication area. STOCK SPACE was an exercise in subtraction. The space was created through the removal of stock material from a conceptually full volume that measured 24’ long x 18’ wide x 12’ tall. High density EPS foam in 4’x 8’ x 16” modules provided a light and machinable medium capable of recording the vestigial marks of fabrication as well as providing adequate dampening and insulation. The resulting assemblage of stacked modules embodied traits of the orthographic grid associated with the length and width of the stock, the topographic contours associated with the depth of the stock and the isoparametric grooves of the resulting surface. The collective composition of these elements was the analytical result of maximum machining curvature.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	caadria2005_b_3c_e
id	caadria2005_b_3c_e
authors	Yasushi Onohara, Tatsuya Kishimoto
year	2005
title	VR System by the Combination of HMD and Gyro Sensor for Streetscape Evaluation
doi	https://doi.org/10.52842/conf.caadria.2005.123
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 123-128
summary	In this paper, Virtual Reality System for Streetscape and Street space evaluation using the Virtual Reality system are concerned. Light and small VR system using the combination of HMD and 3 axes gyro sensor, which provides view stereoscopic environments and enable us to view all direction of streetscape, is presented. Next, the adaptability of this system for the streetscape and space evaluation is confirmed through two experiments. The sense of Height, Volume, Amenity, Depth, and Activeness of different stand points and those by different streets which have different width are investigated and several features of sense of Street space are clarified by the VR system.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	2005_537
id	2005_537
authors	Barrios, Carlos
year	2005
title	Symmetry, Rules and Recursion
doi	https://doi.org/10.52842/conf.ecaade.2005.537
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 537-543
summary	This paper presents a parametric shape grammar that explains the generation of the structural forms of the Spanish designer Santiago Calatrava. The shape grammar is divided into two separate grammars a lower level grammar and a higher level grammar. The lower level or first grammar is composed of rules to generate a “fundamental unit” design, which has the characteristic to be a single component with non-repetitive parts that becomes the primitive object of the design. The higher level or second grammar is composed of rules that generate the overall design by recursive application of Euclidean transformations to the fundamental unit. We concentrate our discussion on the higher level or second grammar to demonstrate the process of generating complex designs by application of simple rules.
keywords	Shape Grammars, Parametric Design, Design Rules, Complex Structures
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: