Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	2006_566
id	2006_566
authors	Rafi, Ahmad; Mohamad Izani Zainal Abidin; Avijit Paul and Aishah Abdul Razak
year	2006
title	Simulation of architectural lighting in a virtual environment - A case study on real and fake High Dynamic Range Images (HDRI)
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 566-572
doi	https://doi.org/10.52842/conf.ecaade.2006.566
summary	The early findings of this research were presented in eCAADe 2005 International Conference, Lisbon primarily to highlight the concept of High Dynamic Range Images (HDRI) when representing architectural spaces in the form of still images. An experiment had been carried out to compare the results between HDRI rendering and ‘conventional’ lighting simulation algorithms namely ray tracing and radiosity. The results were based on static and using the same exposure factors, when capturing HDRI. This project, funded by Intensification Research Priority Area (IRPA) grant continues to present and report HDRI results in a simulation environment. In this paper, we first briefly explain on the concept of real and fake HDRI. Then a comparison experiment is conducted to compare these two methods and discuss the impact and effectiveness of the illumination computation in architectural simulation environment. In order to carry out the experiment, a few models of the architectural scenes were developed. These models were then textured with real photos and manipulated with ‘shaders’, and further rendered using fake and real HDRI techniques. As for the fake HDRI, two methods were developed. The first was using an image as the ambient map and different exposures were created by increasing the value of Hue, V of HSV and saturation. The second involved a series of digital photos with the selection of the brightest and darkest area using Adobe Photoshop to establish the scale of luminosity. A few camera movements were triggered and position for ‘real-time’ rendering simulation. The result of the experiment has shown a significant improvement on the rendering time and quality of the rendering. Finally this paper suggests the selection criteria for choosing real and fake HDRI, and how each technique can be best utilized for architectural representations in a simulation environment.
keywords	HDRI; simulation; Real HDRI;Fake HDRI; illumination computation
series	eCAADe
email
last changed	2022/06/07 07:59

_id	2005_349
id	2005_349
authors	Rafi, Ahmad, Izani, Mohd and Tinauli Musstanser
year	2005
title	High Dynamic Range Image (HDRI) Rendering
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 349-356
doi	https://doi.org/10.52842/conf.ecaade.2005.349
summary	This paper suggests a method known as High Dynamic Range Image (HDRI) to pre-visualise architectural elements in three-dimensional (3D) environment used by Computer Graphic Imaging (CGI) film-makers to integrate 3D models and characters into live action background (special effect). This Intensification Research Priority Area (IRPA) grant project was developed to suggest ways to achieve effective rendering solution and composition of the final output. It will focus on experimental modelling of local cultural elements that provides solutions for radiosity-type effects and dirt shadings. A set of data from an established site (i.e. environment) was captured and represented in High Dynamic Range (HDR) file. This data is integrated with architectural elements (e.g. 3D objects) and then pre-rendered to get the 3D visualisation of the actual environment. Several different exposures were also captured and tested to establish the correct rendering and lighting condition. This earlier result shows that HDRI method provides accurate visualisation and drastically reduces the rendering time without compromising the data (images) with accurate lighting. This paper will demonstrate the process of HDRI, compare the visual impact with ‘radiosity’ technique and other related rendering solutions and present the results, which are useful for architectural animation, simulation and other modelling developments.
keywords	HDRI, Pre-Visualisation, Modelling, Rendering
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2005_628
id	sigradi2005_628
authors	Diogo Righetto, Adriana Volpon
year	2005
title	The dynamics of elaborating and presenting architectural projects
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 628-633
summary	The intention in this work is focused on checking if, with the introduction of informatics in architectural offices, how graphic representation has changed mainly on matters of presentation drawings of the architectural object, which makes communication possible between the designer and user. The research is based on qualitative approach and the methodological procedures adopted consisted of the bibliographical revision that supported all the theoretical body of the research, the subjects of the research – presentation images of Architectural Projects, the field survey and the instruments of data collection. The relationships between professional graduation, drawing teaching and learning, project methodologies, using of digital resources, types and resources of Project Presentation, interface between the language resources used and interface with the user have been studied. The results lead to the changes occurred on the presentation of architectural projects. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	caadria2005_b_3b_b
id	caadria2005_b_3b_b
authors	Jae Hwan Jung
year	2005
title	Algorithmic forest: A Study to Generate ‘Lighting-Revealing’ Structure by Algorithm
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 61-70
doi	https://doi.org/10.52842/conf.caadria.2005.061
summary	In today’s world of architectural design the use of computational technology as drawing and modeling tools is ubiquitous. However, the typical use of the computer as a design tool generally limits the creative aspect of architectural design. Incorporating algorithm can enhance traditional “manual” methods of CAD based design, as well as furthering human intellect in the field of architectural design. The research to be presented will demonstrate the potential benefits of algorithms by using them to design and generate a structure that creates variable lighting effects similar to those created by natural light shining through trees in a forest.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2005_427
id	sigradi2005_427
authors	Tannuré, Abel E.
year	2005
title	Shadow and digital system: digital techniques and architecture
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 427-432
summary	The system proposes to apply the results of the investigation in the task of architecture de-structurizing the idea in order to free the capacity of thought. One works in a three-dimensional way with models built, using discarded material. It is processed by means of digital media, giving a series of images which have been selected. One uses on them different systems of lighting changing the number of lights, the position in space and the distances. Like that one obtains different shadows on a surface; those shadows work in similar form with “eyes” of possible architectural forms. They are digitally processed according to the desired objectives. Several of them are combined adding and removing elements, which makes them dynamic in time. This technique tries to develop a new tool for students who may find the idea spontaneously, with the freedom of thought in three-dimensions like a new form of looking at architecture. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	caadria2005_b_6a_c
id	caadria2005_b_6a_c
authors	Bige Tunçer, Özer Ciftcioglu, Sevil Sariyildiz, Michael Cumming
year	2005
title	Intelligent design support
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 436-446
doi	https://doi.org/10.52842/conf.caadria.2005.436
summary	Design is a complex process that is information and communication intensive. In a design context, the use of knowledge technologies can assist designers in making informed design decisions. This paper reports on an educational experiment that implements an intelligent urban design aid. This experiment facilitates students to do research in a systematic way by using ICKT methods, techniques and tools in order to improve the quality of their urban design. We outline the process, describe the intelligent techniques, discuss the results of the educational experiment, and explore the approach’s potential for real-life design practices.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2005_b_5a_b
id	caadria2005_b_5a_b
authors	De-Lun Huang, Shen-Guan Shih
year	2005
title	A Case-Based Decision Support System for Housing Refurbishment
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 288-299
doi	https://doi.org/10.52842/conf.caadria.2005.288x.r0c
summary	Effective communication is a key for ensuring quality of housing refurbishment. This paper provides a framework of decision support system for housing refurbishment that helps designers better communicate with tenants who generally lack expert knowledge and can not express their needs clearly. The framework is constructed using Case-Based Reasoning (CBR) for retrieving past similar cases to meet the challenges and demands of the present refurbishment project at hand. With the help of the system, users can retrieve past cases that match the users’ requirements and revise them to meet current needs. It can also be used as design criteria for evaluating the final product to ensure its conformance with the initial planning. A test case is used to demonstrate the system’s suitability. The effectiveness of this system is supported by a post-experiment evaluation and interview with the tenant concerning his satisfaction on the refurbishment.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	2005_805
id	2005_805
authors	El-Khoury, Nada, De Paoli, Giovanni and Tidafi, Temy
year	2005
title	Using Digital Devices to Find New Ways of Representing Audience Visibility in Theatrical Spaces
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 805-810
doi	https://doi.org/10.52842/conf.ecaade.2005.805
summary	The following paper is in keeping with other pieces of research which tend to broaden the role of today’s computer tools so that they be seen as more than just representative. In fact, more and more studies focus on computer tools used as smart guides in the development stages of the preliminary concept. We therefore present a cognitive and interactive device with characteristics that address a theatre designer’s requirements. It provides information on the visual quality of seats and optimizes their location in order to improve audience visibility. The working method we introduce will serve as a basis for future implementations when designing theatrical facilities and providing for audience visibility.
keywords	Visibility; CAD; Theatrical Facility; Digital Devices
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	sigradi2005_280
id	sigradi2005_280
authors	Kobayashi, Yoshihiro
year	2005
title	Teaching 3D Software in a big class: the Method and the statistical analysis in 3D education
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 280-285
summary	This paper introduces an experimental course to teach 3D software for more than 200 students at the same time in a semester, and discusses about the quality of results and the statistical analysis. The results are shown as the 3D rendered images made by the students in the general education course. Based on the statistical data from the course, the correlations between the score of students and several factors, such as, access number to online discussion board, gender, software-purchased, degree program, etc. are analyzed.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	caadria2005_b_4b_b
id	caadria2005_b_4b_b
authors	Seichter, Hartmut, Schnabel, Marc Aurel
year	2005
title	Digital and Tangible Sensation: An Augmented Reality Urban Design Studio
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 193-202
doi	https://doi.org/10.52842/conf.caadria.2005.193
summary	Traditionally urban design is perceived, communicated and created using physical and digital media. However, these realms are handled as separate entities, which hinder collaboration, understanding and communication. Collaborative Augmented Reality (AR) systems can integrate these tasks into one media type and allow a different conversation with complex issues. Human Computer Interfaces and Tangible User Interfaces play key role in AR. They allow an engagement with both the real and virtual component of an urban design project. This paper describes an urban design studio that employs AR as medium of collaboration, the theoretical framework of sense of presence, the understanding and the quality of the resulting design.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	2005_415
id	2005_415
authors	Tramontano, Marcelo and Mônaco dos Santos, Denise
year	2005
title	Online_communities
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 415-423
doi	https://doi.org/10.52842/conf.ecaade.2005.415
summary	Research on contemporary habitation spaces is directly related to the study of the relationship between new media and everyday life. This paper presents ongoing in-depth research which intends to discuss these relationships in different ways on a conceptual basis. A collaborative multi-users interface is being specially designed, supported by different kinds of electronic equipment. Furthermore, the project’s objective is to analyze how these information and communication technologies are to be used, as well as their impact on poor communities. As a hypothesis, our intention is to verify if the access to information will be able to broaden social interactions and improve new services which have been set up, in order to guarantee a better quality of life. Beyond being a conceptual approach, the study intends to present and examine facts obtained from intervening in a poor district in São Paulo city, Brazil. Using an existing public telecenter as an access provider to the internet, individual TV-connected set-top boxes in 220 apartments in a local social housing complex are being installed, enabling users to communicate through a collaborative multiusers digital interface. Adding a virtual instance to a geographically-based community, the aim of the project is to provide new possibilities to improve dialogue and debates, to encourage more income and cultural activities. It also intends to evaluate the effects of the technological mediation of social relationships, both inside and outside the community, as well as within the physical urban space such as in the dwellings. The results of this study will be useful in defining public policies to be implemented by the Sao Paulo Local Government. The work is being sponsored by FAPESP, which is the Sao Paulo State Funding Agencie, but also by public institutions, private partners and universities. Researchers involved belong to complementary fields such as architecture, urbanism, computer sciences, social sciences, psychology and electronic engineering.
keywords	Virtual Communities, Collaborative Networks, Digital Inclusion
series	eCAADe
email
last changed	2022/06/07 07:57

_id	4781
authors	Howard, R.
year	1997
title	Using multimedia to link experts' views and derive common conclusions
source	Automation in Construction 6 (1) (1997) pp. 3-9
summary	Few publications on technology are read from start to finish and, where a broad subject is covered, only part of the content is relevant to a particular reader. Facilities such as multimedia and hypertext allow documents from different sources and containing various forms of data to be linked into a report which can be published electronically. Those who access a report, such as Building IT 2005, can then go direct to the topics of particular interest, visit related topics and background data, or search the text for particular terms. The most appropriate medium can be used whether text, data, images or video, and useful material extracted for teaching or research. Actions can be linked back to the papers in which they were recommended so that, while conclusions are presented compactly, the full context and the credentials of the author can be seen.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	sigradi2005_075
id	sigradi2005_075
authors	Müller, Milagros
year	2005
title	Perception of representation space for present forms of art
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 75-79
summary	Contemporaneus art constructs its own space: interactive, multiple, eidetic, heterogenous, discontinuous and subjective: essence, forms and idea of a heterotopic at the same time atopic space, that arises at the moment of the intelligible apprehension of the work. This work sets out to study the construction codes of that space from the spectator point of view, for whom the history is the sum of histories narrated by the space, the scenery, stage scene, choreography, dances, hairdos, accessories, make-up, clothes, illumination, music, sounds, songs, word, performance, gestures etc., for which sets out the analysis from the perceived, analyzed and interpreted images by the spectator. It will be exemplified from the Dogville film, of Lars Von Traer (2004), using the qualitative research method, where the speaker meaning is introduced: the creator intentionality of those spaces, but is inescapable who arises the “interpretation” from the observer. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2006_e034d
id	sigradi2006_e034d
authors	Ryan, Rachel and Donn, Michael
year	2006
title	A 3D, interactive, multilayered, web-enabled model as a tool for multiple sets of end user groups: A case study and end user analysis
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 392-396
summary	This research undertakes a case study involving focus groups of potential end users, to identify how a successful digital tool could be created using new and emerging technologies, to accommodate the multiple needs of these end users. 2005 saw the completion of a research paper, which proposed that a single, 3 dimensional digital model of a city forming a core for many different information systems, is a better approach to the needs of the city than many individual models optimised for each information system. The case for the single 3D model was evaluated through the research, development, delivery and analysis of a prototype 3 Dimensional model of Wellington City, New Zealand, presenting different ‘views’ of information in Wellington: a rendered visualisation in an animated “walkthrough”; the impact of planning constraints on daylight; interactive “plots” of property values. The development and delivery of the prototype model was analysed in regards to how complex, costly and time consuming it may be to exploit one base model for several purposes; and also therefore how beneficial, affordable and potentially successful a single model may be. The prototype model was created to test the idea, and therefore provided conclusions based on a limited feasibility analysis - with four potential information layers modelled and two potential delivery methods tested. The prototype model and user analysis results were presented in a research report that suggested further research and development of a single model could be very beneficial: Positive feedback from potential end users and data providers, and examples of potential data mining opportunities forming the basis of the need for continued research. 2006 sees the research continue as an 18 month research project in conjunction with an industry partner, Terralink International, (http://www.terralink.co.nz/). Terralink International Limited provides GIS and mapping solutions which according to their web site: “enable better business management.” The company maintains a national resource of “imagery, cartography, and spatial databases” and provides consultancy services linking these to company databases through GIS systems. The research investigates the potential for 3 dimensional, interactive, multilayered models to enhance delivery of information to multiple end user groups. The research method uses functional prototypes in end-user focus group workshops. These workshops, consisting of a combination of presentations, hands on interactive examples, group discussions, and individual feedback surveys, aim to establish how a tool might best be developed to communicate to a wide range of end users. The means of delivery whether a stand alone tool or web-based is a key element of the user group workshop assessment process. Note: The submission of the prototype tool (via video or interactive media) would greatly increase the effectiveness of the research presentation. Ability to include such media would be greatly appreciated.
keywords	multilayered; 3D; end users; interactive; web-enabled
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	sigradi2005_634
id	sigradi2005_634
authors	Burt, Richard; Robert Warden, Ozgur Gonen, Vinod Srinivasan
year	2005
title	Digitally Documenting D-Day: The use of Close Range Digital Photogrammetry at Pointe du Hoc
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 634-639
summary	This paper describes the progress of a multi-disciplinary team from Texas A&M University to digitally document the command post at one of the most significant historic sites of the D-Day landings: Pointe du Hoc. The methods used to collect survey data for both the production of 2D Historic American Building Survey drawings and for the 3D digital model are described. The processes used to produce the 3D digital model involves collecting survey data using digital photogrammetry and then applying surfaces to that model using modeling software. The results of the first season’s survey work are described and illustrated. Finally, the problems encountered with lighting and the digital photogrammetry processing are discussed and recommendations made for future work.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
doi	https://doi.org/10.52842/conf.ecaade.2005.331
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2005_811
id	sigradi2005_811
authors	Amundarain, Iñaki Martín; Víctor Aperribay ; Jesús Mª Alonso ; José Javier San Martín José Ignacio San Martín ; José Mª Arrieta ; Igor Treviño
year	2005
title	Advanced techniques of design in support to medical science: Application to implantological treatments.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 811-817
summary	At the present time the importance of the image of people plays a key role. Therefore many people who leave these standards wish to change their aesthetic face one, in occasions to look for characteristics that respond to the modern beauty, and in others, to try to solve a medical problem. In the work that is exposed here, the use of the present technological tools of design appears, like support to the scientific development that it makes possible an effectively learn more express and to the students of Odontolgy, improvement of the quality of the treatments of the doctors and help the patients to see beforehand the final results of the operations, avoiding to see disagreeable images. So, the support of the surgical procedures on systems CAD/CAM is making possible the enormous development of medical science, such form that are every time better, more comfortable to learn and are less traumatic for them. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_269
id	2005_269
authors	Caldas, Luisa and Duarte, José
year	2005
title	Fabricating Ceramic Covers
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 269-276
doi	https://doi.org/10.52842/conf.ecaade.2005.269
summary	This paper describes a studio experiment developed with the aim of exploring the design and fabrication of innovative roof systems based on ceramic tiles using digital technologies. History is rich in examples of the use of ceramic roof tiles since the ancient world. Today’s systems derive from such ancient systems and fall into several basic categories depending on the form of the tiles and how they interlock. These systems present acceptable functional performances due to centuries of refinement, but as they have suffered little formal evolution in recent centuries, to respond to modern needs they require complex layering and assemblies. Recent technological evolution has emphasized the optimization of the tile production process in terms of time saving and cost reduction, and the improvement of product quality in terms of material homogeneity and durability. Little attention has been paid to the tile form and the roof system as a whole, including the assembly process. As a result, despite the variety and performance of existing designs, they are often perceived as outdated by architects who refuse to use them following a stylistic trend in architectural design towards primary forms and flat roofs. The challenge of the experiment was to take advantage of digital design and fabrication technology to conceive systems with improved performance and contemporary designs. The hope was that this could lead architects to consider integrating roof tiles systems in their architectural proposals. Results yielded five different roof systems. These systems are innovative from a formal viewpoint both at the tile and roof level. In addition, they are easy to assemble and possess better thermal and water-proofing performance. Digital technologies were determinant to enable students to design the complex shape of the tiles, to manipulate them into assemblies, and to assess the shape of the roofs, as well as their thermal and structural performance in some cases.
keywords	Design Education; Rapid Prototyping; Collaboration; Ceramics; Innovation; Tiles
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ad19
id	ad19
authors	Calderon, C., and Noble, R
year	2005
title	BEYOND MODELLING: AVANT-GARDE COMPUTER TECHNIQUES IN RESIDENTIAL BUILDINGS.
source	I Jornadas de Investigacion en Construccion, Madrid, 2-4 June, 2005.
summary	If the result of computer innovations can be interpreted as an emerging “difference” in the quality of constructed space, then in order to truly understand what future applications may be regarding architecture at present, we should look at what advanced functions are available in the process of designing forms and space (DeLuca and Nardini, 2002). Recently the so called parametric approach, a technique for describing a large class of designs with a small description in programming code, has become a focus of attention in architectural computing. In this paper, we reflect on the current use of parametric tools using real case studies as well as our own proof of concept parametric programmes and report on how the avant-garde computer techniques may help to increase the quality of residential building.
keywords	Building Quality, Parametric Design
series	other
type	normal paper
email
last changed	2005/12/02 11:42

For more results click below: