Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
doi	https://doi.org/10.52842/conf.ecaade.2005.331
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2005_1_52_176
id	cf2005_1_52_176
authors	GU Ning and MAHER Mary Lou
year	2005
title	Dynamic Designs of 3D Virtual Worlds Using Generative Design Agents
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 239-248
summary	3D virtual worlds are networked environments designed using the metaphor of architecture. Recent developments in 3D virtual worlds focus on interactivity, flexibility and adaptability. Rather than creating virtual environments in which the objects have intelligent behaviours, our research takes a different approach to develop an agent model that is associated with an individual person in the 3D virtual world as a personal design agent. This paper presents a Generative Design Agent (GDA), a kind of rational agent capable of representing a person in a virtual world and designing, implementing and demolishing 3D virtual places based on the occupants' current needs in the virtual world. The core of a GDA's design component is a generative design grammar that is able to capture a style of 3D virtual worlds. 3D virtual worlds designed using the GDA model is another kind of architecture for the "moment".
keywords	virtual environments, generative design, interactive design, shape grammars
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2005_173
id	2005_173
authors	Leeuwen, Jos van, Gassel, Frans van and Otter, Ad den
year	2005
title	Collaborative Design in Education
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 173-180
doi	https://doi.org/10.52842/conf.ecaade.2005.173
summary	Collaboration in design can take place in a physical, social space, in a distributed or virtual environment, or in a combination of both. Design teams use a range of ICT means to support both synchronous and asynchronous communication. While these tools are designed to facilitate collaboration, the collaboration process still requires planning and organisation in a social context, which are activities that students and professionals need to learn. In current practice there is a need for designers and design managers who have the competences to collaborate in design and to organise distributed collaboration processes. At the department of Architecture, Building, and Planning at Eindhoven University of Technology, we have developed a course on Collaborative Design in the Master of Science curriculum. This course addresses both the organisational, social, and technical issues of collaboration in design. The paper introduces the objectives and educational methods used in this course. It describes the experiences of both teachers and students that were gained now that the course was taught in three subsequent years.
keywords	Collaborative Design, Multi-disciplinary Design, Computer Support for Collaborative Working, Education, Design Management
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2005_b_4b_d
id	caadria2005_b_4b_d
authors	Martin Tamke
year	2005
title	Baking Light: Global Illumination in VR Environments as architectural design tool
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 214-228
doi	https://doi.org/10.52842/conf.caadria.2005.214
summary	As proven in the past, immersive Virtual Environments can be helpful in the process of architectural design (Achten et al. 1999). But still years later, these systems are not common in the architectural design process, neither in architectural education nor in professional work. The reasons might be the high price of e.g. CAVEs, the lack of intuitive navigation and design tools in those environments, the absence of useful and easy to handle design workflows, and the quality constraints of real-time display of 3D models. A great potential for VR in the architectural workflow is the review of design decisions: Display quality, comfortable navigation and realistic illumination are crucial ingredients here. Light is one of the principal elements in architectural design, so design reviews must enable the architect to judge the quality of his design in this respect. Realistic light simulations, e.g. via radiosity algorithms, are no longer the domain of high-end graphic workstations. Today's off-the-shelf hardware and 3D-software provide the architect with high-quality tools to simulate physically correct light distributions. But the quality and impression of light is hard to judge from looking at still renderings. In collaboration with the Institute of Computer Graphics at our university we have established a series of regular design reviews in their immersive virtual environment. This paper describes the workflow that has emerged from this collaboration, the tools that were developed and used, and our practical experiences with global-light-simulations. We share results which we think are helpful to others, and we highlight areas where further research is necessary.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2005_b_6c_c
id	caadria2005_b_6c_c
authors	Mauro Chiarella
year	2005
title	Parametric Surfaces And Architecture: Concepts, Design, and Production
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 496-502
doi	https://doi.org/10.52842/conf.caadria.2005.496
summary	By incorporating parametric surfaces and spline entities into the shape modeling computer systems, new design and production graphic tools have been created in the conceptual and poetic field of architecture; thus allowing an intuitive approach to the fast production of complex shapes with a minimum amount of data and specific knowledge. The analogous production systems (constrained by the material resources and constructive procedures present in the local existing technologies) are challenged by design and virtual simulation systems, suggesting new relationships between the architectural features and their representation: the creation of a symbolic and dynamic information space where the representation affects the identity of what is being represented. Taking into account this current challenge mentioned above, we have decided to work in the mixture, without reciprocal exclusions or substitutions, proposing some work alternatives to approach the issue under discussion in the Architecture Workshop.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	cf2005_1_31_28
id	cf2005_1_31_28
authors	PENG Chengzhi
year	2005
title	Townscaping: Development of Dynamic Virtual City Augmented 3D Sketch Design Tools
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 105-114
summary	The paper presents the development of an experimental Web-based design environment called Townscaping to be used at the conceptual stage of architectural and urban design. Inspired by Gordon Cullen's seminal work on Townscape (1960's-1970's), the idea of Townscaping is to explore how 3D digital sketch design tools could be developed to operate in connection with a dynamic virtual city system under a user's direct control. A prototype of Townscaping has been designed and implemented on the basis of an existing dynamic virtual city system. In Townscaping, a set of tools is provided for users to create and edit 3D graphic elements to be positioned directly onto the user-specified virtual city models. One of the key features of Townscaping is to enable sketching while navigation: designers can perform sketch design and gain immediate visual feedback while navigating the 3D virtual city models to any viewpoint at any moment. The current study suggests that it is feasible for virtual city models to serve as interactive urban contexts for 3D sketch design. Townscaping is considered primarily a research platform with which we are interested in investigating if designers' engaging in 3D space conceptions may be enhanced through interacting and sketching with virtual townscapes.
keywords	virtual city, 3D sketch design, interactive urban visualisation, web-based design
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	sigradi2005_689
id	sigradi2005_689
authors	Ruiz-Rodarte, Rocio; José Larios, Fernando García Cuspinera
year	2005
title	Real Time Visualizing Tools: Description of an experience where game engines and Internet browsers are used as means of exhibition at an archaeological site
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 689-694
summary	This paper presents the use of Virtual Reality (VR) environments as didactic means of exhibition. It approaches VR field by non traditional tools of visualization -as game engines- and describes the process and particular issues faced during its development. The examples shown in this document are part of an archaeological project under current development which faced budget solutions for equipment and its maintenance. The lack of experience outside the traditional VR field (SGI), lead the research team to try different game engines and VRML format in explore solutions to issues as performance, complexity, appearance, visualization, different needs of programming skills, file format compatibility, archiving and promotion applications. The experience delivered to replicate the process for other cultural projects can be useful also to architects and designers that are willing to experiment with VR as means of visualization during different stages of their projects.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	5b89
id	5b89
authors	Sevaldson, Birger
year	2005
title	Developing Digital Design Techniques Investigations on Creative Design Computing
source	Oslo School of Architecture and Design, PHD-Thesis
summary	1.1. The themes in this theses 16 1.1.1. Mind the mind gap 16 1.1.2. Prologue: The World Center for Human Concerns 17 1.1.3. Creative computer use 26 1.1.4. Design strategies and techniques 31 1.2. Overview 33 1.2.1. Main issues 34 1.2.2. The material 36 1.2.3. The framework of this thesis 37 2. CURRENT STATE AND BACKGROUND 39 2.1. New tools, old thoughts. 39 2.1.1. A misuse strategy 44 2.1.2. Emergence in design 47 2.1.3. Programming and design 50 2.1.4. Artificial intelligence 53 2.1.5. Human intelligence and artificial representations 53 2.2. Electronic dreams 54 2.2.1. The dream of intuitive software 55 2.2.2. The dream of the designing machine 60 2.2.3. The dream of self-emerging architecture; genetic algorithms in design 61 2.2.4. A cultural lag 62 2.3. Ideas and ideology 64 2.3.1. A personal perspective on the theories of the 1990s 65 2.3.2. "The suffering of diagrams" 68 2.3.3. Architectural theory and design methodology 69 2.4. Ideas on creativity 72 2.4.1. What is creativity? 73 2.4.2. Creativity, a cultural phenomenon. 75 2.4.3. Creativity in the information age 79 2.4.4. Creativity-enhancing techniques 81 2.4.5. Crucial fiicro-cultures 82 2.4.6. A proposal for a practitioner approach to creativity 83 2.5. Summary and conclusion of part 2 84 3. NEW DESIGN TECHNIQUES 86 3.1. Introduction 86 3.2. New technology - new strategy 87 3.3. Thinking through design practice: the inspirational playful design approach 88 3.4. A Corner stone: emergence 89 3.4.1. The source material 94 3.5. Recoding, translation and interpretation 95 A case: Tidsrom 97 3.6. Reconfiguring schemata 109 3.7. Rules and games 113 3.8. Virtuality and virtual models 118 3.8.1. What is "The Virtual"? 118 3.8.2. Virtual reality 119 Investigating "the virtual" 120 3.8.3. Analysing the virtual 126 3.9. Visual thinking (diagrams and visual thinking) 130 3.9.1. Visual Thinking and Abstraction. 130 3.9.2. A heuristic process 132 3.9.3. Visual thinking, skills and tacit knowledge 132 3.9.4. Media for visual thinking 133 3.10. Diagrammatic thinking 138 3.10.1. Descriptive diagrams 142 3.10.2. Generative diagrams 144 3.10.3. Versioning 149 3.10.4. Finding 153 3.10.5. Translation and interpretation 158 3.10.6. From generative diagram to program 168 3.10.7. Dynamic generative diagrams 171 3.11. The question of selection 175 3.12. Summary and conclusion of part 3 178 4. WAYS OF WORKING: FROM DESIGN PRACTICE TOWARDS THEORY AND DIGITAL DESIGN METHODS 179 4.1. Introduction 179 4.1.1. Practice-based research 180 4.1.2. Visual material is central. 180 4.1.3. Two investigation paths 180 4.1.4. Achievements 180 4.2. Methods 181 4.2.1. Explorative and generative research 182 4.2.2. A first-person approach 183 4.2.3. Analysis 184 4.2.4. The Material 185 4.3. Systematising creative computer use. Ways of working; techniques in creative computer use. 186 4.3.1. Categorization 186 4.3.2. Mapping the field of design computing. 187 4.3.3. Generic techniques 190 4.3.4. Specific techniques 192 4.3.5. Table of techniques 193 4.3.6. Examples of techniques 200 4.3.7. Traces of technology. 213 4.4. The further use of the generated material 219 4.4.1. Realisation strategies 221 4.4.2. Templates and scaffolds 223 4.5. Summary of Part 4 240 PART 5. WAYS OF THINKING: INTENTIONS IN CREATIVE COMPUTER USE. 241 5.1. Intentions 241 5.1.1. Categorising intentions 242 5.2. Intention themes 243 5.2.1. Cases and samples from Group one: Formal, phenomenal, spatial and geometrical themes 244 5.2.2. Intentions of response to the complexity of urban systems 297 5.3. The Hybrid Process 317 5.3.1. Hybridization strategies 319 5.3.2. The hybrid process and its elements. 328 6. SUMMARY AND CONCLUSIONS 344 6.1. Principles, concepts and methods for creative design computing 344 6.2. A new type of creativity? 348 6.3. A practice as the field for an investigation 349 6.4. Suggestions for further studies 349
series	thesis:PhD
type	normal paper
last changed	2007/04/08 16:11

_id	acadia05_156
id	acadia05_156
authors	Cabrinha, Mark
year	2005
title	From Bézier to NURBS: Integrating Material and Digital Techniques through a Plywood Shell
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 156-169
doi	https://doi.org/10.52842/conf.acadia.2005.156
summary	The development of digital fabrication has reintroduced material processes with digital processes. There has been much discussion about the tool and the objects of the tool, but little discussion of the implication of the material process on the digital process. A brief historical review on the development of computer numerical control and the origins of the Bézier curve reveals an instrumental fact: computer numerical controlled tools necessitated advancements in computational surfaces which eventually led to NURBS (Non-Uniform Rational B-Splines) surfaces. In other words, the origins of NURBS surfaces resides in its relation to material processes, rather than many current approaches that develop free form surfaces and then force the tool onto the material without regard to the material properties. From this historical and mathematical review, this project develops toward more intelligent construction methods based on the integration of NURBS differential geometry paired with material qualities and processes. Specifically, a digital technique of developing conceptual NURBS geometry into piecewise surface patches are then flattened based on the material thickness and density. From these flattened patches, a material technique is developed to intelligently remove material to allow the rigid flat material to re-develop into physical surface patches. The goal of this research is to develop digital and material techniques toward intelligent construction based on the correspondence between digitally driven surface and digitally driven material processes. The application of this technique as a rational and flexible system is to support the dynamic response of form and material toward such performative aspects as structure, daylight, ventilation, and thermal properties.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2005_067
id	2005_067
authors	Pellitteri, Giuseppe, Colajanni Benedetto and Concialdi, Salvatore
year	2005
title	Distance Collaboration. A Comparative Analysis of Tools and Procedures
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 67-73
doi	https://doi.org/10.52842/conf.ecaade.2005.067
summary	Besides design theory and practice, curricula of architectural students should include some experiences referring to professional situations. Among these experiences, Collaborative Design is nowadays somewhat frequent. It is normally practised by large professional studios, using expansive software which is beyond what they can afford on average. Much academic research on the topic has also been carried out often resulting in the proposition of new and too complex description models of the building object. We think that students should instead get acquainted with such a design process: an experience has been planned and carried out in our Department for the purpose of practising the possible paradigm in a more ordinary context. Its purpose was threefold. First, making the students grasp the method’s potentialities and learn the right approach. Second, testing the practical suitability of the most widely used software. Third, comparing their relative efficiency. The software we used was: Architectural Desktop, AutoCad Revit, ArchiCad for Teamwork. We focused special attention on how representing and managing restraints, since they are the main source of conflicts. This was the hardest topic to manage. The results were partly positive inasmuch as the experience showed that it could be possible to adopt the Collaborative Design paradigm which is also used in the AEC field. The drawbacks emerged from the analysis of non-dedicated software are: a relative slow process for the lack of certain specific tools; a subsequent necessity of integrating them with different communication software; the difficulty of managing hard and soft restraints. However, in the final analysis, the experience can be considered as positive.
keywords	Collaborative Design, Architectural teaching
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2005_a_2b_a
id	caadria2005_a_2b_a
authors	Affleck, Janice; Kvan Thomas
year	2005
title	REINTERPRETING VIRTUAL HERITAGE
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 169-178
doi	https://doi.org/10.52842/conf.caadria.2005.169
summary	This paper describes the context and proposal for an alternative approach to the common pattern of application of digital tools in the area of cultural heritage, also know as Virtual Heritage (VH). It investigates and addresses arising issues in a digital case study developed to implement a theoretical framework and investigate how and if existing technology can support it.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2005_529
id	sigradi2005_529
authors	Bourdakis, Vassilis; Anna Chronaki
year	2005
title	A Social and gendered analysis of the utilization of a VR planning tool for public participation
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 529-534
summary	The paper is a follow-up to earlier work investigating the research hypothesis that Virtual Reality (VR) is nowadays a maturetechnology, suitable for communicating planning ideas. A work in progress involving the redesign of two squares within the urbanfabric of a deprived Athenian neighbourhood is presented. A VR model of existing and proposed layouts was constructed, focusingon accuracy of visualisation, ease of navigation, online spatialized commenting mechanism and ease of access. User groups weresupported with appropriate training—researchers had the opportunity to observe the reactions of people and deliver questionnairesthat help identify problem areas related to technophobia, disbelief, past knowledge, communication skills, understanding of thevisualisation system used, usability of the navigation system as well as the commenting mechanism. Gender and social exclusionare key issues in this particular multicultural neighbourhood. Collecting demographic data on all participants (age, sex, educationlevel, employment, marital status, etc.) during the commenting process enables a series of analyses testing the ways the system isused.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_c086a
id	sigradi2006_c086a
authors	Bustos Lopez, Gabriela Ilusion and Vélez Jahn, Gonzalo
year	2006
title	Alternativas de Diseño: Sede virtual interactiva para el Taller Virtual de las Américas [Alternatives of Design: 3D Interactive Virtual Site to "Las Americas Virtual Design Studio"]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 47-51
summary	Alternatives of Design is a course that aims to prepare architects from the Master Studies Department of Computing in Architecture (LUZ), in two ways: first, by expanding their perspective about potentialities of using new virtual reality technologies in architecture, and second, by qualifying them to apply this acquired theoretical knowledge in their professional environment, The goal of this research is to describe the products of the course Alternatives of Design 2005, which include: a methodology of designing to the cyberspace by using VRML and Java Script, in order to achieve a proposal of a Site to "Las Americas Virtual Design Studio". This site is projected as a digital manager to interactive simulation in multiuser virtual worlds, specifically to virtual architectonical workshops, With this proposal, it is possible to integrate many users, in real time, from different locations on the same virtual world in Internet.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_344
id	sigradi2005_344
authors	Bustos, Gabriela I. L.; Iván V. Burgos P., Javier Oliva
year	2005
title	Multi-user virtual worlds: 3D interactive visualization in synthetic environments for design workshops
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 344-349
summary	The goal of this research is to describe a methodology of architectural design by using digital technology with three-dimensional interactive simulation in multi-user virtual worlds. In addition, this study will focus on the application of this method in the workshops at the School of Architecture in the University of Zulia. With this proposal, it is possible to integrate many users, in real time, from different locations on the same virtual world in Internet. In the same way, each visitor is able to interact and modify the virtual world using virtual menus while sharing ideas or modifications regarding the design of the project. This strategy allows modeling, visualizing, developing and evaluating the designed projects during the conceptual and parametric phase in the process of design. This application is a powerful tool to develop creativity and skills of spatial perception among the students. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2005_1_34_180
id	cf2005_1_34_180
authors	CALDERON Carlos, WORLEY Nicholas and NYMAN Karl
year	2005
title	Architectural Cinematographer: An Initial Approach to Experiential Design in Virtual Worlds
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 135-144
summary	This paper presents a paradigm for the generation of camera placements for architectural virtual environments as a method of enhancing the user's experience and as a way of facilitating the understanding of architectural designs. This paper reports on an initial prototype of a real-time cinematic control camera engine which enables the creation of architectural walkthroughs with a narrative structure. Currently, there is neither software nor a structured approach which facilitates this in architectural visualisations. The paper discusses the potential of our approach; analyses the technical and application domain challenges; examines its current limitations using well known architectural design concepts such as rhythm.
keywords	virtual environments, navigation, camera engine, cinematography, experiential design
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	sigradi2005_603
id	sigradi2005_603
authors	Castañé, Dora; Claudio Deho, Adrián Barcesat, Carlos Tessier
year	2005
title	Urbamedia: the design of an integrated system of urban-building visualization and communication
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 603-608
summary	This paper presents the advancements of the Urbamedia project which was designed as part of a research program at the Center CAO (Creation computer assist), School of Architectural Design and Urbanism, University of Buenos Aires, which was led by the valued master and advisory professor Architect Arturo F. Montagu. This proposal of the city of Buenos Aires on the Mayo Avenue expands the original historical fragment presented between the following two referenced representative landmarks: The Two Congresses Square and the Mayo Square. It continues with the advancement of methodologies and techniques implemented in a system of “integrated visualization and communication” for the development of a VRML (Virtual Reality Modeling Language) 3D virtual non-immersive and interactive vision. It also incorporates the development of a “foundation of digitally integrated knowledge” with fragments of central areas from other surrounding cities as well as interfaced phenomenological situations. The application of digital VRML technology has allowed for thoroughly researching the processes through dynamic simulation of specific urban fragments (Mayo Avenue within Buenos Aires) and the cities that are also participating in the project. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2005_1_22_147
id	cf2005_1_22_147
authors	CHAN Chiu-Shui, DANG Anrong and TONG Ziyu
year	2005
title	A 3D Model of the Inner City of Beijing
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 63-72
summary	This study has two major concentrations: 1) exploring methods of creating a digital city model, and 2) applying the model to study urban spatial structure, an issue of particular interest and importance to urban planners. Based on existing studies that primarily address two-dimensional (2D) urban structure, this paper focuses on the three-dimensional (3D) structure relating to the 3D urban form. Given their greater clarity and possibilities for quantitative analysis, both 3D digital urban models and GIS spatial overlay analysis methods hold tremendous potential for analysing and predicting future urban form. In this project, the Xidan Business District in Beijing's Inner City was the area selected to implement the digital-city application. Under the hypothesis that the existing urban spatial structure is determined by the city's urban planning scheme and current urban marketing forces, it is found that actual urban development does not follow the planning restrictions on zoning and building height regulations. Some contradictions and conflicts, such as building location and height, appeared in the studied district. The specific reasons for the discrepancies need to be further studied.
keywords	3D city modeling, GIS, remote sensing, virtual environments
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	caadria2005_a_2b_c
id	caadria2005_a_2b_c
authors	Chiu-Shui Chan, Chien-Hui Weng
year	2005
title	How Real Is the Sense of Presence in A Virtual Environment? : Applying Protocol Analysis for Data Collection
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 188-197
doi	https://doi.org/10.52842/conf.caadria.2005.188
summary	This study attempts to investigate the sense of presence in a fully immersive virtual environment. The methodology applied in this study used protocol analysis for data collection. A preliminary experiment was conducted to explore noticeable phenomena to develop a hypothesis for the final experiments. Four different virtual reality models, representing four different kinds of virtual space, were navigated in C6 (CAVE facilities) by two human subjects. Results of the research in this direction have provided valuable understanding regarding the sense of presence in the virtual environment.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2005_b_3c_a
id	caadria2005_b_3c_a
authors	Christopher Lowry
year	2005
title	Making Understanding: Research in the application of virtual environments in the teaching of architectural design and technology
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 93-101
doi	https://doi.org/10.52842/conf.caadria.2005.093
summary	This paper describes how the application of interactive three dimensional computer modelling enables students of architecture to gain a comprehensive insight into how buildings are made. An intimate exploration of what can be, in the student’s perception, a lacklustre subject area is revitalized through the use of virtual building models and introduces the student to the potentials of this medium in communicating their own design work. In addition the published case studies are navigated as one would a web site which is a familiar and comfortable format for the student. Original working drawings and specification provided by architects are utilised in generating detailed three dimensional virtual models of the complete building along with larger scale detail studies of particular building components. The models are then animated or transferred to VRML format for publication within interactive case studies. The case studies may be accessed via the department server for use by staff during lectures and seminars or informally by the individual student.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2005_058
id	sigradi2005_058
authors	Cohen Egler, Tamara Tania
year	2005
title	Electronic interaction in the government of Rio de Janeiro
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 58-62
summary	The purpose of the study is to examine the relations established between the state and the society by interventions of information technologies by the electronic government of the city of Rio de Janeiro. The methodological option was to realize a research that had by objective elevated the processes and procedures, by electronically mediation that is utilized by the government of the city. The results of the investigation reveal that the virtual governments reproduce by mimic the structure of traditional government. That makes us understand that the technological possibilities given by the information technologies to communicate “all with all”, are not applied and so remains the forms of communication “one for all,” and traditional forms of government are maintained. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:49

For more results click below: