Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 555

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2005_a_1a_c
id	caadria2005_a_1a_c
authors	Soo-Hoon Park
year	2005
title	Interpretation of Implicit Design Knowledge in Architectural Drawings Into Explicit Knowledge
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 23-32
doi	https://doi.org/10.52842/conf.caadria.2005.023
summary	This paper concerns a methodology in applying architectural design knowledge to the interpretation of design concepts from architectural drawings. We formalize the design knowledge such that knowledge plays a key role in the design interpretations that map between drawings and their design concepts. We consider this mapping, in general, as those linking between design decision space and design performance space, where design variables in both spaces are examined and categorized from the drawings and concepts. Examinations on drawings are performed based on qualitative shape analysis schemes and we apply feature-based shape analysis techniques to encapsulate those design characteristics in decision space. Interpretations of design concepts through shape characteristics are based on mostly two types of symmetries, namely cyclic and dihedral groups. We use CommonLISP in analyzing shapes in design decision space and CLIPS expert system shell in illustrating simple reasoning based on those design knowledge. We select target drawings from some of Frank Lloyd Wright’s block housing plans. In this experiment we try to illustrate a valid methodology that explicitly handles some of the implicit design knowledge hidden in architectural drawings.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	2005_341
id	2005_341
authors	Uddin, M. Saleh
year	2005
title	Animation Techniques to Represent Graphic Analysis of Architecture: A Case Study of Richard Meier’s Atheneum
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 341-348
doi	https://doi.org/10.52842/conf.ecaade.2005.341
summary	It is debatable whether design can be taught. Frank Lloyd Wright himself mentioned that architecture should be taught by its principles, discerning the principles underlying in works by various architects. In the absence of thoroughly satisfactory methods of combining various means of digital representation for analysis, this paper investigates the features of 3D computer models; in particular, its animation environment to aid graphic analysis of built forms. Computer 3D animations, which are generated from 3D models, have an unparalleled capability to demonstrate spatial experience. Animations can also manipulate the constitute components of the spatial structure, thus illustrating analytically the composition of a building or object. The most significant aspect of 3D animation is in its flexibility of manipulation of various physical and rendering attributes of a 3D model. For the purpose of case study analysis, Richard Meier’s Atheneum in New Harmony, Indiana is chosen for its clarity in design elements and demonstration of applicable principles. Through various animation clips, the basic techniques are illustrated as an effective method of communicating concepts of graphic analysis.
keywords	3D Animation, Analytic Diagram, Form Analysis, Design Principles, 3D Model
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia20_114p
id	acadia20_114p
authors	Zivkovic, Sasa; Havener, Brian; Battaglia, Christopher
year	2020
title	Log Knot
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 114-119.
summary	Log Knot, developed by the Robotic Construction Laboratory (RCL) at Cornell University, is a robotically fabricated architectural installation that establishes a method for variable compound timber curvature creation utilizing both regular and irregular roundwood geometries. Moreover, the project develops methods for minimal formwork assembly and moment force optimization of customized mortise and tenon joints. Following the logic of a figure-8 knot, the project consists of an infinite loop of roundwood, curving three-dimensionally along its length. There are a variety of techniques to generate single curvature in wood structures – such as steam bending (Wright et al., 2013) or glue lamination (Issa and Kmeid, 2005) – but only a few techniques to generate complex curvature from raw material within a single wooden structural element exist. To construct complex curvature, the research team developed a simple method that can easily be replicated. First, the log is compartmentalized, establishing a series of discrete parts. Second, the parts are reconfigured into a complex curvature “whole” by carefully manipulating the assembly angles and joints between the logs. Timber components reconfigured in such a manner can either follow planar curvature profiles or spatial compound curvature profiles. Based on knowledge gained from the initial joinery tests, the research team developed a custom tri-fold mortise and tenon joint, which is self-supportive during assembly and able to resist bending in multiple directions. Using the tri-fold mortise and tenon joint, a number of full-scale prototypes were created to test the structural capacity of the overall assembly. Various structural optimization protocols are deployed in the Log Knot project. While the global knot form is derived from spatial considerations – albeit within the structurally sound framework of a closed-loop knot structure – the project is structurally optimized at a local level, closely calibrating structural cross-sections, joinery details, and joint rotation in relation to prevailing load conditions.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	sigradi2005_483
id	sigradi2005_483
authors	Abdelhameed, Wael
year	2005
title	Digital-Media Impact on the Representation Capability of Architects
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 483-489
summary	Architects draw to define design problems, to construct concepts, or to explore ideas. Representation not only connects various design activities and tasks, but also is utilized inside all these activities and tasks. Within the context of this research, the Design Capabilities of architects are defined as the skills used during the design process, including Conceptualization, Representation, Form Giving, Knowledge Building and Retrieving, and Decision-Making. Using representational techniques introduced by digital media during design development has altered what we can represent, perceive, and therefore conceive and imagine. Depending on primary data (a global questionnaire) and secondary data (synthesis of previous researches), the results of this investigation have substantiated that there has been a positive impact of digital media settings on the output of Representation capability of architects. The analysis reveals some detailed findings, which provide a better understanding of the subject matter.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_478
id	sigradi2005_478
authors	Abdelhameed, Wael
year	2005
title	Digital-Media Impact on the Decision-Making Capability of Architects
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 478-482
summary	The underlying assumption of the research is that media the representational environments of architects’ design thoughts, have impact on the way by which architects practice design and develop their design capabilities. This research aims at exploring the interrelationship between the media used by the architect and the development that might occur in the Decision-Making capability.The role of digital media in the architectural design process has become exploration and suggestion of what is being made, rather than, illustration of what has been already made. Depending on primary data (a global questionnaire) and secondary data (synthesis of the previous research), the results have substantiated the observation that there has been positive impact of digital media settings on the Decision-Making capability of architects. The analysis reveals some detailed findings, which provide a better understanding of the subject matter.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2005_1_64_168
id	cf2005_1_64_168
authors	ACHTEN Henri
year	2005
title	Resolving some Ambiguities in Real-time Design Drawing Recognition by means of a Decision Tree for Agents
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 311-320
summary	In this paper, we present a theoretical study on automated understanding of the design drawing. This can lead to design support through the natural interface of sketching. In earlier work, 24 plan-based conventions of depiction have been identified, such as grid, zone, axial system, contour, and element vocabulary. These are termed graphic units. Graphic units form a good basis for recognition of drawings as they combine shape with meaning. We present some of the theoretical questions that have to be resolved before an implementation can be made. The contribution of this paper is: (i) identification of domain knowledge which is necessary for recognition; (ii) outlining combined strategy of multi-agent systems and online recognition; (iii) functional structure for agents and their organisation to converge on sketch recognition.
keywords	multi-agent system, decision tree, pattern recognition, sketch
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2005_287
id	2005_287
authors	Achten, Henri and Reymen, Isabelle
year	2005
title	Structured Reflection as a Means to Deepen Understanding of CAAD
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 287-294
doi	https://doi.org/10.52842/conf.ecaade.2005.287
summary	In this paper we outline a strategy of structured reflection to improve reflection by students in a course on the implication of CAAD, design theory, and design methodology. Earlier editions of the course showed that students often did not evolve their learning beyond a checklist level. Reflection is an important mechanism to improve learning from design situations. After a consideration of the main approaches to design reflection, we take up Schön’s notion of reflection and provide support for structured reflection in CAAD education, based on earlier experiences with structured question lists in a civil engineering course. Findings after the first year’s run show a deeper level of reflection on a more elaborate level.
keywords	Structured Reflection, CAAD, Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2005_321
id	sigradi2005_321
authors	Almeida da Silva, Adriane Borda; Ana Lúcia Pinho Lucas, Ricardo Silveira
year	2005
title	Defining a process of design and learning of digital graphics by means of distance education
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 321-326
summary	This paper describes and analyses the teaching/learning approach which progressively is being established in the context of the Digital Graphics Post-Graduation Course. The method used has, basically, generated educational situations able to increase the self-learning capacity of the students; develop skills for collaborative activities to build the knowledge and overtake the limits of time and space imposed by traditional educational systems. The theoretical references adopted to draw the didactic situations are explained, these situations include more and more moments of distance learning, synchronous or asynchronous, redefining the attitude of lecturers and students. This work points out the introduction of a tutor, an agent to promote interactions among student/lecturer/object of knowledge; and the investment on production of didactic material specific to digital graphics is emphasized between lecturers and students, exploring collaborative activities to the distance learning modality. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2017_184
id	ecaade2017_184
authors	Almeida, Daniel and Sousa, José Pedro
year	2017
title	Tradition and Innovation in Digital Architecture - Reviewing the Serpentine Gallery Pavilion 2005
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 267-276
doi	https://doi.org/10.52842/conf.ecaade.2017.1.267
summary	Please write your aToday, in a moment when digital technologies are taking command of many architectural design and construction processes, it is important to examine the place and role of traditional ones. Designed by Álvaro Siza and Eduardo Souto de Moura in collaboration with Cecil Balmond, the Serpentine Gallery Pavilion 2005 reflects the potential of combining those two different approaches in the production of innovative buildings. For inquiring this argument, this paper investigates the development of this project from its conception to construction with a double goal: to uncover the relationship between analogical and digital processes, and to understand the architects' role in a geographically distributed workflow, which involved the use of computational design and robotic fabrication technologies. To support this examination, the authors designed and fabricated a 1:3 scale prototype of part of the Pavilion, which also served to check and reflect on the technological evolution since then, which is setting different conditions for design development and collaboration.bstract here by clicking this paragraph.
keywords	Serpentine Gallery Pavilion; Computational Design; Digital Fabrication; Wooden Construction; Architectural Representation;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2005_673
id	sigradi2005_673
authors	Amorim, Arivaldo Leão de; Daniel Chudak
year	2005
title	Digital Historic Heritage: documenting of Pelourinho, Salvador - Bahia, Brazil, with 3D laser scanning technology
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 673-678
summary	This paper describes the Pelourinho Project realized past July in Salvador, during the 1st International Conference on 3D Laser Scanning for Heritage Documentation. The Pelourinho located at the historic center of Salvador, is an impressive wide set of buildings listed by UNESCO as World Heritage. The text contains a quickly overview about the 3D laser scanning technology, shows how data are captured and what they stored and what they means. The 3D laser scanning model, another kind of 3D geometric model is called point cloud and represents an excellent way to store data of some particular constructions. Because its irregular shapes it is very arduous to survey and represent these constructions by any other method. The point cloud model is an excellent way to represent with integrity and accuracy these particular complex shapes like the colonial baroque churches in Brazil. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2005_a_7c_a
id	caadria2005_a_7c_a
authors	Anandan Karunakaran
year	2005
title	Organisation of Pedestrian Movements: an Agent-Based Approach
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 305-313
doi	https://doi.org/10.52842/conf.caadria.2005.305
summary	Cities are becoming more complex in this digital era due to technological changes. Thinking of cities without such technological changes is equivalent to an embryonic state in the morphology of city growth, that is, the growth seems less advanced. So it is appropriate to think of the non digital city digitally. Urban design is one state which establishes the perfect relationship between the street, people and building. The relationship of the people with the building and street is becoming one of the key factors in architecture. It has been observed that the design of a city has been influenced by the pedestrian movement. Many cities prior to the industrial era were largely determined by the social interactions based on walking. Thus the pedestrians play a key role in the formation of the city. They are a very important component in any representation of transport movements. They generally terminate or initiate a chain of linked activities, and if observed carefully, a single pedestrian movement is meant to include various sub journeys from one location to another. In order to organize pedestrians, we need to understand the pedestrian movement system. Though there is a lot of development of urban models in this aspect, it is still in a nascent state in comparison with the digital advancement. Thus much research work is carried out which can be applied to any given environmental setting, and as a result urban designers can respond to the changing socio-cultural technologies.
series	CAADRIA
last changed	2022/06/07 07:54

_id	caadria2005_b_5b_d
id	caadria2005_b_5b_d
authors	Andre Brown, Michael Knight, Martin Winchester
year	2005
title	Representation and Delivery of City Models
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 344-352
doi	https://doi.org/10.52842/conf.caadria.2005.344
summary	City modelling has a considerable range of potential applications and because of this, as a field of research has attracted a great deal of attention over recent years. Here we reflect on work already reported by the authors in this area, describe some more recent work on improving the system that had been developed and show an example of how city modelling is being applied in practice as a planning tool in the UK.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2005_b_5b_c
id	caadria2005_b_5b_c
authors	Andreas Voigt, Helena Linzer
year	2005
title	Added Value: Implementation of User Requirements in City Simulators
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 337-343
doi	https://doi.org/10.52842/conf.caadria.2005.337
summary	The following contribution discusses the possible consequences of the concept of City Simulators and Digital City Models, which can be obtained from a previously conducted user inquiry in an Urban Planning Department. At the core of the examination are the additional benefit (added value) and the increasing acceptance of digital planning techniques by its users which can be made possible by the implementation of user requirements in City Simulators. Various experiments for cooperative planning in the urban space are formulated.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	2005_729
id	2005_729
authors	Asanowicz, Alexander
year	2005
title	Computer Renderings – „Reality is Overrated”
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 729-735
doi	https://doi.org/10.52842/conf.ecaade.2005.729
summary	In this paper, two problems concerning truthfulness of computer-generated visualization are considered. The first one concerns relationships between reality and its representation by computer renderings. The second problem concerns the kind of representations people need. These problems are analyzed for static perception of architectural forms based on computer visualization, and for dynamic walk-through perception of urban space. The thesis of the paper is that many photorealistic renderings are excessively realistic and thus not true. In this context, a new question arises: do we need the true representation of an object? The author claims that we need “adequate” pictures. Adequate means a picture that is satisfactory in particular situation. The problem of equivalence of media (renderings and animations) and reality is not that important here. Much research is concerned with the truthfulness and falsity of information. However, they do not take into consideration that frequently what seems to be real exerts bigger influence on people than what is in fact real. Understanding this problem may help us in producing images that better correspond to people’s expectations.
keywords	Perception, Rendering, Non-Photorealistic Rendering
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_131
id	2005_131
authors	Bailey, Rohan
year	2005
title	Digital Tools for Design Learning
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
doi	https://doi.org/10.52842/conf.ecaade.2005.131
summary	There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords	Design Education, Digital Design, Teaching Tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia05_170
id	acadia05_170
authors	Barker, Daniel and Dong, Andy
year	2005
title	A Representation Language for a Prototype CAD Tool for Intelligent Rooms
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 170-183
doi	https://doi.org/10.52842/conf.acadia.2005.170
summary	Intelligent rooms are a type of intelligent environment which enhance ordinary activities within the confines of a room by responding to human interaction using pervasive and ubiquitous computing. In the design of intelligent rooms, the specification of how the intelligent room enacts intelligent behavior through computational means is as integral as the geometric description. The self-aware and context-aware capabilities of intelligent rooms extend the requirements for computer-aided design tools beyond 3D modeling of objects. This article presents a Hardware as Agents Description Language for Intelligent Rooms (HADLIR) to model hardware in an intelligent room as “hardware agents” having sensor and/or effector modalities with rules and goals. End-users describe intelligent room hardware as agents based on the HADLIR representation and write agent rules and goals in Jess for each hardware component. This HADLIR agent description and the requisite software sensors/effectors constitute “hardware agents” which are instantiated into a multi-agent society software environment. The society is then bridged to either a virtual environment to prototype the intelligent room or to microelectronic controllers to implement a physical intelligent room. The integration illustrates how the HADLIR representation assists in the design, simulation and implementation of an intelligent room and provides a foundation technology for CAD tools for the creation of intelligent rooms.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2005_1_73_113
id	cf2005_1_73_113
authors	BARRIOS Carlos
year	2005
title	Transformations on Parametric Design Models
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 393-400
summary	This paper presents a research in progress in the development of parametric models for generation of complex shapes, and introduces a methodology for exploration of possible designs generated from a single model. The research presents a case study on the designs of the Spanish architect Antonio Gaudi, and takes on the fundamental rules of form generation of the lateral nave columns of the Sagrada Familia temple in Barcelona. A parameterization schema is presented as a fundamental tool for design exploration, which allows the reproduction of the original shapes designed by Gaudi, and the generation of a large set of new designs.
keywords	parametric modeling, parametric design, design transformations
series	CAAD Futures
email
last changed	2006/11/07 07:27

For more results click below: