Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	2005_407
id	2005_407
authors	Post, Jelle and Koutamanis, Alexander
year	2005
title	Simulation for Daylighting in the Real World
doi	https://doi.org/10.52842/conf.ecaade.2005.407
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 407-414
summary	Technology has been an obvious solution to the increasing complexity of the built environment. As the number and specificity of use requirements increases, designers, clients and managers tend to segment the overall problem to manageable aspects only tentatively linked to each other. As a result, aspects such as ventilation and lighting tend to rely more on mechanical means than on the affordances of the overall design. Ironically this increases the complexity and opacity of the built environment probably to a greater extent than rules, regulations and requirements. The paper presents a review of available computational methods and techniques that aim at a more coherent approach by supporting integration of (day)lighting into architectural designing. It proposes that the two main courses of further action are the improvement and updating building regulations, and the combination of quantitative knowledge of good, existing daylight designs with advanced simulation-based analyses of early design proposals. Improvements in daylighting design and the integration of daylighting in design solutions depend primarily on design guidance based on the coordinated development and thorough understanding of usable measures such as the Daylight Factor, the Daylight Performance Index and function factors. A major prerequisite to both simulation and design guidance are robust and detailed geometrical 3D models that accommodate both the input and the output of design actions and transactions.
keywords	Simulation; Daylight; Integration
series	eCAADe
email
last changed	2022/06/07 08:00

_id	2005_131
id	2005_131
authors	Bailey, Rohan
year	2005
title	Digital Tools for Design Learning
doi	https://doi.org/10.52842/conf.ecaade.2005.131
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
summary	There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords	Design Education, Digital Design, Teaching Tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_829
id	2005_829
authors	Boeykens, Stefan and Neuckermans, Herman
year	2005
title	Scale Level and Design Phase Transitions in a Digital Building Model
doi	https://doi.org/10.52842/conf.ecaade.2005.829
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 829-836
summary	Research and development on Computer Aided Architectural Design often focuses on simulating a building as a digital model. Our research on the early design stages explores concepts we feel are lacking in current design tools and research projects. Building models are usually static models, serving as a snapshot of the design. We aim to support design phase and scale level transitions, to better support the workflow of the designer. This paper formulates our approach at supporting transitions in an integrated design environment for architecture.
keywords	CAAD, Architectural Modeling, Design Process
series	eCAADe
email
last changed	2022/06/07 07:52

_id	2005_000
id	2005_000
authors	Duarte, José Pinto, Ducla-Soares, Gonçalo and Sampaio, A. Zita (Eds.)
year	2005
title	Digital Design: The Quest for New Paradigms
doi	https://doi.org/10.52842/conf.ecaade.2005
source	23nd eCAADe Conference Proceedings [ISBN 0-9541183-3-2], Lisbon (Portugal) 21-24 September 2005, 880 p.
summary	As the field of computer-aided design evolved over the last thirty years or so, it has witnessed five changes of emphasis in research direction. In the first stage, the use of computers in architecture focused on the development of Computer Aided Design (CAD), that is, systems that simulated the use of drafting tools, and research was mainly concerned with the satisfaction of designers' ergonomic needs. In the second stage, there were efforts to use computer tools in non-graphical aspects of designing, such as the use of Data Base Management Systems (DBMS) in the quantity survey of buildings. The concern was to satisfy the cognitive needs of designers by focusing on the way information and knowledge were perceived, acquired, stored, and processed. In the third stage, the focus shifted to the development of realistic models of buildings to permit the assessment of design proposals. In the fourth stage, the focus was on studies concerned with the encoding of architectural knowledge into design tools (KBMS), and the discussion was whether to go towards design automation or design supporting tools. In the fifth stage, with the advent of the Internet and the development of communication tools, research became focused on the collaborative and social aspects of design activity. In recent years, research also became concerned with the exploration of the physical implications of digital media in the production of artefacts. Today, there is a vast range of research interests and approaches, but the quest for new, unifying paradigms continues.
series	eCAADe
type	normal paper
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	2005_373
id	2005_373
authors	Ucelli, Giuliana, Conti, Giuseppe and De Amicis, Raffaele
year	2005
title	Shape Knowledge Embedded in a Collaborative Virtual Design Environment for Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2005.373
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 373-381
summary	VR-based design environment have been traditionally not connected to companies’ design repositories and knowledge management systems. Till now these tools are mainly used for the initial exploration of innovative and original three-dimensional spaces and curves. Our approach encourages the use of VRbased design environments as design tools from where to reuse design solutions and to access design information, which are stored in internal repositories. This vision goes towards the development of a VR-based integrated design platform. Further, today’s knowledge management systems show evident limitations when dealing with multimedia files and 3D models. In order to overcome this limitation a framework for embedding in our VR-based design environment a Knowledge Management system for multimedia content has been developed and it is here described. Our solution implies the use of annotation languages such as the recent MPEG7 ISO/IEC (Multimedia Content Description Interface) standard for metadata, which is based on the XML language. Data types handled in our system are multimedia formats including text, audio, video, images, and 3D models. The main contribution of our research activity is in providing an innovative and original approach for supporting the design process, which takes advantage both of the visualization and design capabilities of virtual reality technology and of the reuse of design solutions directly in VE, through the retrieval of 3D models and multimedia data from various sources.
keywords	Virtual Reality, Collaborative Architectural Design, Design Reuse, Content Retrieval
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2006_443
id	caadria2006_443
authors	M.W. KNIGHT, A.G.P. BROWN, J.S. SMITH
year	2006
title	DIGITAL TERRAIN MESHES FROM GPS IN URBAN AREAS: A Practical Aid to City Modelling
doi	https://doi.org/10.52842/conf.caadria.2006.x.a6t
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 443-451
summary	The work presented here brings together two core interests that have been developed by the first two authors over recent years. The first is the development of city models for use in a range of applications where different data sets and different levels of detail may be appropriate. The second is the development of low cost systems that can deliver useful tools to help address Computer Aided Architectural Design problems. In addition the involvement of a colleague in Electrical Engineering and Electronics reflects a long standing belief in the benefits of cross-disciplinary and interdisciplinary work between architecture and parallel research fields. The product of the collaboration is a system that can aid in the production of terrain models that, in our case, are particularly important as the base for a city model (Brown et.al, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2009_673
id	cf2009_673
authors	Tamke, Martin; Thomsen, Mette, Ramsgard
year	2009
title	Digital wood craft
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 673- 686
summary	In 1995, Robin Evans points out in his book The Projective Cast how the development of techniques changed architecture and the space inhabited in times of Gothic and early Renaissance. We see a parallel phenomenon today, where the interplay of technology and tool gives shape to new design (Kolarevic 2005). Yet in opposition to the interwoven fields of design and craft of the late Gothic, today’s building sector is enormously diversified, and a growing complexity in the building process and number of used materials can be observed. This gives an opposite point of departure into a more integrated field of design and innovation in architectural design and building industry.
keywords	Digital production, CAD/CAM, parametric design, complex form, mass customization
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ijac20053303
id	ijac20053303
authors	Alvarado, Rodrigo Garcia; Castillo, Gino Alvarez; Marquez, Juan Carlos Parra; Mayorga, Sergio Navarro
year	2005
title	Filmic Development of Architectural Animations
source	International Journal of Architectural Computing vol. 3 - no. 3, 299-316
summary	This paper proposes a general method to make animated presentations of architectural designs, based on cinematographic techniques. Particularly, it reviews theoretical documenttion about filmmaking as well as several productions that exhibit remarkable locations. The proposed method first comprises of a planning stage, with the narrative and graphic formulation of the presentation. Next is an elaboration or adjustment stage for the digital modelling of the design, and finally, there is an animation production and editing stage. Likewise, the research sets up a computer implementation of some activities and characteristics, and experiments in the programming of camera movements for architectural animations. In general, this work suggests focusing on the communication of the qualitative features of the design, instead of the elaboration of the digital model, and on emphasizing the visual diversity, graphic style and narrative construction of the presentation.
series	journal
more	http://www.ingentaconnect.com/search/expand?pub=infobike://mscp/ijac/2005/00000003/00000003/art00004
last changed	2007/03/04 07:08

_id	sigradi2005_126
id	sigradi2005_126
authors	Barrios Hernandez, Carlos Roberto
year	2005
title	EVALUATION OF parametric models: TWO PROVISOS FOR THE SAGRADA FAMILIA COLUMNS
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 126-132
summary	This paper presents a research in progress in the development of parametric models for geometric manipulation of complex shapes, and introduces a methodology for evaluation of the design instances of a parametric model. The research presents a case study on the designs of the Spanish architect Antonio Gaudi, and takes on the fundamental rules of the form generation of the nave columns of the Expiatory Temple of the Sagrada Familia in Barcelona. The evaluation is done applying two provisos that determine if a shape is part of the design language and is an instance of the parametric model is a Gaudinian design.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2005_501
id	2005_501
authors	Celani, Gabriela, Pupo, Regiane, Mendes, Gelly and Pinheiro, Érica
year	2005
title	Generative Design Systems for Housing
doi	https://doi.org/10.52842/conf.ecaade.2005.501
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 501-506
summary	The present paper describes an undergoing research that aims at developing a generative design computer implementation with an outside-in approach, OIDS. The system will allow developing and visualizing context-based housing development designs. This approach will include both natural characteristics of the site and the existing neighboring buildings. It is argued that certain common urban design practices are the result of a simplification due to difficulties in dealing with the irregularities of the natural environment, which often requires the use of time-consuming methods. The computer-based application will provide tools for dealing with such difficulties, allowing designers to describe their own design rules. In an initial phase of the project, a tool that can subdivide irregular land parcels into equally sized areas has been developed. In further stages, other environmental variables will be addressed, such as solar aspect and prevalent wind directions. Eventually, even the designs of interior layouts should result from exterior forces. The resulting generative system is expected to facilitate and encourage the use of a more organic approach to building siting and design, bringing about the important discussion about which should be the main forces in the generation of the built environment.
keywords	Generative Design; Context-Based Design; Housing Design; Building Siting; Urban Space Simulation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2005_659
id	sigradi2005_659
authors	García Alvarado, Rodrigo; Gino Alvarez Castillo, Juan Carlos Parra Márquez, Sergio Navarro Mayorga
year	2005
title	Building the look: methodology for architectural animations
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 659-663
summary	It proposes a procedure to elaborate animated presentations of architectural designs based on perceptual properties, filmmaking practice and characteristics of digital systems. This approach set up four steps; preparation of narrative and visual content, elaboration or adjustment of digital modelling, production of animated views and final edition of presentation. Currently it works in the evaluation of this method making some examples and the computer implementation of several tasks. This work suggests specific features for architectural animations and its possibilities to express design issues, remarking the visual diversity and development of meanings. Encouraging architectural design focused in the living experience instead of formal arrangements. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2005_144
id	sigradi2005_144
authors	Goldberg, Sergio Araya
year	2005
title	ICHTYOMORPH - Design and development of a fish-skin double façade system for freeform super tall buildings using Parametric Design Tools
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 144-149
summary	Parametric design implies a whole new paradigm of non standard design through the propagation of the difference, the repetition of variation. The ability to control variation and adaptation to local conditions allows more precise yet complex designs. This paper describes a research project designing double skin façade systems for tall buildings using a parametric approach. These designs are tested later through rapid prototyping techniques. This research aims its design towards an adjustable façade structure, articulated according to various complex geometrical conditions on the façade of a building. The skin is conceived as a light, flexible, reconfigurable composition responding to different criteria regarding the design, its environment or the program. It achieves this through different levels of control on different scales of the project, by embedding several layers of parametric features, which are nested one inside the other, in order to produce the overall rainscreen surface of the tower.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2005_a_1b_a
id	caadria2005_a_1b_a
authors	Rabee M. Reffat
year	2005
title	Collaborative Digital Architectural Design Learning within 3D Virtual Environments
doi	https://doi.org/10.52842/conf.caadria.2005.065
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 65-74
summary	This paper introduces a collaborative learning approach to digital architectural design within a 3D real-time virtual environment within which students Inhabit, Design, Construct and Evaluate (IDCE) their designs virtually and collaboratively. The paper articulates the development and implementation of the IDCE model utilized within the 3D virtual environment for achieving collaborating digital architectural design learning. The effects of metaphors on constructing architectural designs within virtual environments are addressed.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	acadia05_200
id	acadia05_200
authors	Tsou, J.-Y., Chan Yi Lee, Mak Kwok Pui, Ru Xu Du, Liang Jian, Yeung Kim
year	2005
title	Applying Scientific Simulation to Integrate Thermoelectric Conductor Module into Architectural Design – Smart Wall for Thermal Comfort
doi	https://doi.org/10.52842/conf.acadia.2005.200
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 200-210
summary	This paper presents the innovative architectural design concept, which is to integrate the new material and technology into the building design to achieve the thermal comfort and at the same time reduce the energy consumption of the building by making use of the renewable energy, including solar and wind energy. The system is developed based on the idea of regional thermal comfort in building. The advantage of the system is the environmental friendly approach, costless operation, reliability, flexibility, scalability and adaptability for the integration to the building design. With the design concept, we tried to do two application designs in two virtual sites. One is a badminton court for the 2008 Beijing Olympic Games and the other is a cooling pond in a shopping mall. We will introduce how computational simulation can contribute to the prediction of the performance of the design. We will also discuss how the computation simulation can help in the design optimization process. Through the development of the new design integration of the material to the building, we would like to feedback to the material industry to encourage further collaboration and development in the material enhancement, so that both industries and the society can benefit from the advancement.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
doi	https://doi.org/10.52842/conf.ecaade.2005.331
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2005_b_4c_b
id	caadria2005_b_4c_b
authors	Chang, Ting-Yuan
year	2005
title	Shift the Style: Supporting Product Design through Evolving Styles
doi	https://doi.org/10.52842/conf.caadria.2005.240
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 240-245
summary	How can we provide computational supports for product designers to actively utilize existing styles as driving force to achieve new designs? For a new style that can take the advantage from existing styles, we surveyed Case-Based Design and Case-Based Reasoning systems for product design and found discouraging results. We employ Learning Classifier Systems, a machine-learning paradigm, to perform automatic style classification. These classified styles are used to evolve new styles of designs.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	2005_303
id	2005_303
authors	Clark, Steve and Maher, Mary Lou
year	2005
title	Learning and Designing in a Virtual Place
doi	https://doi.org/10.52842/conf.ecaade.2005.303
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 303-309
summary	This paper reports on a study of the role of place in a virtual learning environment for digital media design. Using an immersive 3D Virtual World based on Active Worlds, we have created a virtual learning place for students in a Website Design course. The virtual learning place has two distinct parts: a classroom-like place surrounded by student galleries. Students can navigate and communicate (synchronous chat) within the environment in the form of an avatar (virtual person). We recorded the conversations and activities of the students in discussions held in the virtual learning place and applied a communication coding scheme to analyze their discussions. In this paper we present our approach to developing an understanding of the role of place and evidence of its effect on the conversations of design students in a virtual learning environment. We show how we identified the characteristics of place and specifically how it provides a context for identity and presence for supporting collaborative and constructivist student centred learning.
keywords	Virtual Learning Environments, Place, Virtual Design Studios
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia05_114
id	acadia05_114
authors	Due Schmidt, Anne Marie
year	2005
title	Navigating towards digital tectonic tools
doi	https://doi.org/10.52842/conf.acadia.2005.114
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 114-127
summary	The computer holds a great potential to break down the barriers between architecture and the technical aspects relating to architecture, thus supporting innovative architecture with an inner correspondence between form and technique. While the differing values in architecture and technique can seem like opposites, the term tectonics deals with creating a meaningful relationship between the two. The aim of this paper is to investigate what a digital tectonic tool could be and what relationship with technology it should represent. An understanding of this relationship can help us not only to understand the conflicts in architecture and the building industry but also bring us further into a discussion of how architecture can use digital tools. The investigation is carried out firstly by approaching the subject theoretically through the term tectonics and by setting up a model of the values a tectonic tool should encompass. Secondly the ability and validity of the model are shown by applying it to a case study of Jørn Utzon’s work on Minor Hall in Sydney Opera House - for the sake of exemplification the technical field focused on in this paper is room acoustics. Thirdly the relationship between the model of tectonics and the case will be compared and lastly a discussion about the characteristics of a tectonic tool and its implications on digital tectonic tools will be carried out.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2005_197
id	2005_197
authors	Hsieh, Chih-Wen
year	2005
title	A Networked Sketching Environment for Supporting Collective Creativity
doi	https://doi.org/10.52842/conf.ecaade.2005.197
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 197-204
summary	In the early conceptual design, individual designers often make extensive use of sketches to explore design problems. Moreover, within the collaborative design sessions, designers communicate and discuss with each other by sharing their temporary sketches. These private design artifacts are used to externalize ideas and share them with other designers in order to facilitate the performance of design sessions. During such social interaction performance, some abstraction behaviors behind social activities like collective creativity are synchronized. However, the existent tele-communication tools proposed for separated design groups, slightly hold back the activities of collective creativity. It makes designers dedicated just in the table discussion, and negatively influenced on collective creativity sharing. Thus, some private design artifacts became isolated in tele-communicative environments. In order to respect this, we propose an approach that uses the notion of Digital Backchannel to realize the sub-channel communications. In this paper, we also present the implementation of a working prototype of groupware application. Finally, we discussed some points from our studies.
keywords	CSCD: CSCW; Natural User Interface; Digital-Backchannel; Collective Creativity
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: