Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 99

Reformat results as: short short into frame detailed detailed into frame

_id	2005_010
id	2005_010
authors	Aish, Robert
year	2005
title	From Intuition to Precision
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 10-14
doi	https://doi.org/10.52842/conf.ecaade.2005.010
summary	Design has been described as making inspire decisions with incomplete information. True, we may use prior knowledge, we may even think we understand the causalites involved, but what really matters is exploration: of new forms, of new materials, and speculation about the response to the resulting effects. Essentially, this exploration has its own dynamics, involving intuition and spontaneity, and without which there is no design. But of course we all know that this is not the whole story. Design is different to 'craft'; to directly 'making' or 'doing'. It necessarily has to be predictive in order to anticipate what the consequence of the 'making' or 'doing' will be. Therefore we inevitably have to counter balance our intuition with a well developed sense of premeditation. We have to be able to reason about future events, about the consequence of something that has not yet being made. There is always going to be an advantage if this reasoning can be achieved with a degree of precision. So how can we progress from intuition to precision? What abstractions can we use to represent, externalize and test the concepts involved? How can we augment the cognitive processes? How can we record the progression of ideas? And, how do we know when we have arrived? Design has a symbiotic relationship with geometry. There are many design issues that are independent of any specific configurations. We might call these “pre-geometric” issues. And having arrived at a particular configuration, there may be many material interpretations of the same geometry. We might call these “post-geometric” issues. But geometry is central to design, and without appropriate geometric understanding, the resulting design will be limited. Geometry has two distinct components, one is a formal descriptive system and the other is a process of subjective evaluation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_027
id	2005_027
authors	Akin, Ömer and Özkaya, Ipek
year	2005
title	Mixing Domains: Architecture plus Software Engineering
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 27-35
doi	https://doi.org/10.52842/conf.ecaade.2005.027
summary	Software engineering is a multidisciplinary area of knowledge combining competence in computation with at least one other area of expertise, typically in the domain of the applications being created. A course offering for students of engineering, architecture and software engineering at Carnegie Mellon illustrates the challenges and opportunities of cross-domain instruction. These include ontology, problem taxonomies, and instruction strategies.
keywords	Computing education in AEC; requirement engineering
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2005_673
id	sigradi2005_673
authors	Amorim, Arivaldo Leão de; Daniel Chudak
year	2005
title	Digital Historic Heritage: documenting of Pelourinho, Salvador - Bahia, Brazil, with 3D laser scanning technology
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 673-678
summary	This paper describes the Pelourinho Project realized past July in Salvador, during the 1st International Conference on 3D Laser Scanning for Heritage Documentation. The Pelourinho located at the historic center of Salvador, is an impressive wide set of buildings listed by UNESCO as World Heritage. The text contains a quickly overview about the 3D laser scanning technology, shows how data are captured and what they stored and what they means. The 3D laser scanning model, another kind of 3D geometric model is called point cloud and represents an excellent way to store data of some particular constructions. Because its irregular shapes it is very arduous to survey and represent these constructions by any other method. The point cloud model is an excellent way to represent with integrity and accuracy these particular complex shapes like the colonial baroque churches in Brazil. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_000
id	sigradi2005_000
authors	Angulo, Antonieta and Vásquez de Velasco, Guillermo (eds.)
year	2005
title	SiGradi2005: Vision and Visualization
source	Proceedings of the 9th Iberoamerican Congress of Digital Graphics Graphics / ISBN 978-1-59975-306-5] Lima (Perú) 21-23 november 2005, 826 p.
summary	Paradoxically, one of the most difficult but enjoyable things we do is to imagine. To open the eyes of our mind and see what no one else can see. We see images of things that are yet to be and through the same skill we devise ways in which to make them happen. We design the future in the form of environments, graphics, products, films, and a growing range of new media. Our ability to develop a vision and to visualize it is a gift that we are called to cultivate and put to good use. We have been privileged with a great responsibility. In the process of developing a vision and communicating that vision to others, we “visualize”. Visualization can be a very private experience in which we are alone with mental images that help us shape our vision. In other instances visualization can be a component of mass communication. Visualization can be a means or can be an end. It can be a small architectural sketch on a paper napkin or a mega-graphic covering a high-rise building, an airplane or a ship. In every case, the relationship between vision and visualization is a mutually supportive articulation of what our eyes and our minds can see. Our vision of the role of computers in the art and science of visualization is in constant development. Computer visualization can support an intimate dialog between a designer and his/her vision. It can translate and communicate that vision to a larger audience and in the hands of a new-media artist it can actually constitute his/her vision. The 9th Annual Conference of SIGraDI (Ibero American Society for Computer Graphics) will explore our collective vision on the future of digital visualization and digital media in Environmental Design, Product Design, Graphic Design, Cinematography, New Media, and Art. Authors are invited to share their research work with a focus on how it contributes to shape a collective understanding of the past, awareness of the present, and vision of the future in our multiple disciplines.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia05_000
id	acadia05_000
authors	Ataman, Osman (Ed.)
year	2005
title	Smart Architecture: Integration of Digital and Building Technologies
source	Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8, ISavannah (Georgia) 13-16 October 2005, 259 p.
doi	https://doi.org/10.52842/conf.acadia.2005
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry.
series	ACADIA
email
more	http://www.acadia.org
last changed	2022/06/07 07:49

_id	2005_131
id	2005_131
authors	Bailey, Rohan
year	2005
title	Digital Tools for Design Learning
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
doi	https://doi.org/10.52842/conf.ecaade.2005.131
summary	There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords	Design Education, Digital Design, Teaching Tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2005_749
id	sigradi2005_749
authors	Bessone, Miriam; Susana Garramuño de Galuzzi
year	2005
title	Design education, technology and visualization
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 749-754
summary	University faculty -adult culture- work from the logic that goes through their speech, didactic model and strategies, providing special links with: the aim of knowledge, transmission mechanisms and technological medium. Students -young culture- receive and deal with knowledge mechanisms from a new logic. In a multimedia framework they establish interpretations using technological medium from semantic decodification. Young graduates, assistants, studio leaders -intermediate culture- coming from traditional learning models with acquired abilities in digital media, are a “potential interface” between both cultures. The impact between fields and cultures implies limitations and risks that may encourage change. A discourse about “new didactic configurations” from the point of view of these three cultures makes possible the exploration of other ways of teaching. Therefore the articulation of teacher-student interrelations and media promotes the development of teaching-learning techniques. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2005_1_36_100
id	cf2005_1_36_100
authors	BILDA Zafer and GERO John S.
year	2005
title	Do We Need CAD during Conceptual Design?
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 155-164
summary	This paper presents the results of experiments to test whether a designer necessarily needs to produce and utilize external representations in the very early phases of conceptual design. Three architects are engaged in two separate design processes, one is the experiment condition where they were not allowed sketch, and the other, the control condition where they were allowed to sketch. In the experiment condition, architects were required to put on a blindfold and think aloud while designing. The results show that in both conditions the design outcomes fit in the given dimensions of the site, accommodate the space requirements and allow an effective use for the clients. Thus, when the participants were blindfolded, they were able to produce designs by using their cognitive resources to create and hold an internal representation of the design rather than by sketching, or using a CAD tool. We finally raise the question: do architects need CAD representations during the conceptual phase of the design activity?
keywords	representations, protocol studies, conceptual design
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	acadia05_156
id	acadia05_156
authors	Cabrinha, Mark
year	2005
title	From Bézier to NURBS: Integrating Material and Digital Techniques through a Plywood Shell
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 156-169
doi	https://doi.org/10.52842/conf.acadia.2005.156
summary	The development of digital fabrication has reintroduced material processes with digital processes. There has been much discussion about the tool and the objects of the tool, but little discussion of the implication of the material process on the digital process. A brief historical review on the development of computer numerical control and the origins of the Bézier curve reveals an instrumental fact: computer numerical controlled tools necessitated advancements in computational surfaces which eventually led to NURBS (Non-Uniform Rational B-Splines) surfaces. In other words, the origins of NURBS surfaces resides in its relation to material processes, rather than many current approaches that develop free form surfaces and then force the tool onto the material without regard to the material properties. From this historical and mathematical review, this project develops toward more intelligent construction methods based on the integration of NURBS differential geometry paired with material qualities and processes. Specifically, a digital technique of developing conceptual NURBS geometry into piecewise surface patches are then flattened based on the material thickness and density. From these flattened patches, a material technique is developed to intelligently remove material to allow the rigid flat material to re-develop into physical surface patches. The goal of this research is to develop digital and material techniques toward intelligent construction based on the correspondence between digitally driven surface and digitally driven material processes. The application of this technique as a rational and flexible system is to support the dynamic response of form and material toward such performative aspects as structure, daylight, ventilation, and thermal properties.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ad19
id	ad19
authors	Calderon, C., and Noble, R
year	2005
title	BEYOND MODELLING: AVANT-GARDE COMPUTER TECHNIQUES IN RESIDENTIAL BUILDINGS.
source	I Jornadas de Investigacion en Construccion, Madrid, 2-4 June, 2005.
summary	If the result of computer innovations can be interpreted as an emerging “difference” in the quality of constructed space, then in order to truly understand what future applications may be regarding architecture at present, we should look at what advanced functions are available in the process of designing forms and space (DeLuca and Nardini, 2002). Recently the so called parametric approach, a technique for describing a large class of designs with a small description in programming code, has become a focus of attention in architectural computing. In this paper, we reflect on the current use of parametric tools using real case studies as well as our own proof of concept parametric programmes and report on how the avant-garde computer techniques may help to increase the quality of residential building.
keywords	Building Quality, Parametric Design
series	other
type	normal paper
email
last changed	2005/12/02 11:42

_id	3032
id	3032
authors	Calderon, C., Worley, N and Nyman, K.
year	2005
title	A CINEMATIC CAMERA CONTROL ENGINE FOR ARCHITECTURAL VISUALISATIONS IN VIRTUAL WORLDS.
source	Proceedings. Conference on Construction Applications of Virtual Reality 2005, Durham, UK 12th –13th Sep 2005.
series	other
type	normal paper
email
last changed	2005/12/02 11:43

_id	sigradi2005_603
id	sigradi2005_603
authors	Castañé, Dora; Claudio Deho, Adrián Barcesat, Carlos Tessier
year	2005
title	Urbamedia: the design of an integrated system of urban-building visualization and communication
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 603-608
summary	This paper presents the advancements of the Urbamedia project which was designed as part of a research program at the Center CAO (Creation computer assist), School of Architectural Design and Urbanism, University of Buenos Aires, which was led by the valued master and advisory professor Architect Arturo F. Montagu. This proposal of the city of Buenos Aires on the Mayo Avenue expands the original historical fragment presented between the following two referenced representative landmarks: The Two Congresses Square and the Mayo Square. It continues with the advancement of methodologies and techniques implemented in a system of “integrated visualization and communication” for the development of a VRML (Virtual Reality Modeling Language) 3D virtual non-immersive and interactive vision. It also incorporates the development of a “foundation of digitally integrated knowledge” with fragments of central areas from other surrounding cities as well as interfaced phenomenological situations. The application of digital VRML technology has allowed for thoroughly researching the processes through dynamic simulation of specific urban fragments (Mayo Avenue within Buenos Aires) and the cities that are also participating in the project. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	20e8
id	20e8
authors	Cavallin H, Martin W M, Heylighen A
year	2005
title	THIS IS NOT A CAUCUS RACE. OR WHY UPGRADES IN GUIS WILL (NOT NECESSARILY) MAKE USERS (INSTANTLY) MORE PRODUCTIVE
source	SID 2005, Proceedings of the 4th Social Intelligence Design Workshop, Stanford University, March 2005 (CD Rom)
summary	In this paper we discuss the impact that upgrading applications may have across different users, using for this purpose the case of GUI improvements to a market leading drafting application. Our findings show that even though there are improvements in productivity that can be associated with the changes to the GUI, these improvements will not necessarily affect evenly all users, suggesting an interaction between the level of expertise and variations in productivity.
keywords	software evaluation, problem solving, reliability, absolute benchmarking, commercial CAD software, upgrading
series	other
type	normal paper
email
last changed	2005/04/01 13:24

_id	0a93
id	0a93
authors	Cavallin H, Martin W M, Heylighen A
year	2005
title	MIND-ING THE TASK
source	SID 2005, Proceedings of the 4th Social Intelligence Design Workshop, Stanford University, March 2005 (CD Rom)
summary	In this paper we describe our findings regarding the role of context in usability evaluation, particularly how the nature of the tasks can affect the users’ perception of the performance of a particular application. Our findings show a relationship between the variation in the nature of the tasks used for usability evaluation and the way in which subjects evaluate these applications afterwards using user -administered questionnaires. Our findings contradict the absolute benchmarking goal of some of these tools, and pose questions about the possibility of achieving that kind of benchmarks in software usability evaluation.
keywords	software evaluation, problem solving, reliability, absolute benchmarking, commercial CAD software, upgrading
series	other
type	normal paper
email
last changed	2005/04/01 13:23

_id	sigradi2005_300
id	sigradi2005_300
authors	Cavieres, Andrés P.; Marcelo Quezada G.
year	2005
title	Analysis of the possibilities offered by the application of parametric modeling technologies in the design processes shared between architects and industrial designers: The prefabricated house case.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 300-303
summary	Traditionally, the teaching of digital design systems has been focused on the operative learning of software. However, this almost exclusively technical approach has leaded to a partial view of these systems, as well suited platforms to exploration of project’s possibilities. Consequently their relevance as a base for project representation and therefore as a useful instrument for conceptual exploration for design and experimental research of their processes have been undervalued. On the other hand, this restrictive perspective results in an important waste of the teaching possibilities lying in CAD software related with interdisciplinary teamwork. The following academic experience obeys to a new insight of how to teach these tools, based upon problem solving in Design by interdisciplinary students work teams from Architecture and Industrial Design. In this bet, the learning process is flexible, shared and collaborative, according to the requirements of each project, powered by the commitment of facing common goals. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	2005_501
id	2005_501
authors	Celani, Gabriela, Pupo, Regiane, Mendes, Gelly and Pinheiro, Érica
year	2005
title	Generative Design Systems for Housing
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 501-506
doi	https://doi.org/10.52842/conf.ecaade.2005.501
summary	The present paper describes an undergoing research that aims at developing a generative design computer implementation with an outside-in approach, OIDS. The system will allow developing and visualizing context-based housing development designs. This approach will include both natural characteristics of the site and the existing neighboring buildings. It is argued that certain common urban design practices are the result of a simplification due to difficulties in dealing with the irregularities of the natural environment, which often requires the use of time-consuming methods. The computer-based application will provide tools for dealing with such difficulties, allowing designers to describe their own design rules. In an initial phase of the project, a tool that can subdivide irregular land parcels into equally sized areas has been developed. In further stages, other environmental variables will be addressed, such as solar aspect and prevalent wind directions. Eventually, even the designs of interior layouts should result from exterior forces. The resulting generative system is expected to facilitate and encourage the use of a more organic approach to building siting and design, bringing about the important discussion about which should be the main forces in the generation of the built environment.
keywords	Generative Design; Context-Based Design; Housing Design; Building Siting; Urban Space Simulation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2005_a_2a_b
id	caadria2005_a_2a_b
authors	Chieh-Jen Lin
year	2005
title	Space layout game: An Interactive Game of Space Layout for Teaching and Representing Design Knowledge
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 130-141
doi	https://doi.org/10.52842/conf.caadria.2005.130
summary	This paper described a prototype of interactive space layout, a tool for primary stage of architectural space layout called Space Layout Game (SLG). Rather than focused on the automation of space layout, we are interested in interactive responding in manipulative process and assisting teaching and representation of design skills and knowledge. Through composing a prototype of space layouts, reusing and modifying this prototype or other form teachers or other students to adapt to new conditions, students can present their design intensions, and learn layout skills and design knowledge through the manipulative processes
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	9c37
id	9c37
authors	Coates P, Derix C, Krakhofer S and Karanouh A
year	2005
title	Generating Architectural Spatial Configurations: two approaches using voronoi tessellations and particle systems
source	Proceedings of the Generative Arts conference, Milan, 2005
summary	It was one of the primary goals of the original Master’s programme in Computing and design at UEL in 1991 that we should work towards defining morphological generative processes for the conceptual design of architectural objects. These two papers offer a range of techniques which have been developed by two of this years MSc students (04-05) which show that we are getting close to this. The approaches range from computational geometric approaches (3d parametrics and voronoi diagrams) to emergent spatial organisation using agent based modelling. In many cases the resultant geometry is defined to the point where it can be transferred to advanced evaluation and fabrication systems, thus making this work sufficiently developed to begin to form a useful part in practical design processes.
keywords	morphology, computational geometry, particle systems, physical simulation, voronoi diagrams
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:39

For more results click below: