Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 542

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2011_p115
id	cf2011_p115
authors	Pohl, Ingrid; Hirschberg Urs
year	2011
title	Sensitive Voxel - A reactive tangible surface
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 525-538.
summary	Haptic and tactile sensations, the active or passive exploration of our built surroundings through our sense of touch, give us a direct feeling and detailed information of space, a sense of architecture (Pallasmaa 2005). This paper presents the prototype of a reactive surface system, which focuses its output on the sense of touch. It explains how touch sensations influence the perception of architecture and discusses potential applications that might arise from such systems in the future. A growing number of projects demonstrate the strong impact of interaction design on the human senses and perception. They offer new ways of sensing and experiencing architectural space. But the majority of these interaction concepts focus on visual and auditory output-effects. The sense of touch is typically used as an input generator, but neglected as as a potential receiver of stimuli. With all the possibilities of sensors and micro-devices available nowadays, there is no longer a technical reason for this. It is possible to explore a much wider range of sense responding projects, to broaden the horizon of sensitive interaction concepts (Bullivant 2006). What if the surfaces of our surroundings can actively change the way it feels to touch them? What if things like walls and furniture get the ability to interactively respond to our touch? What new dimensions of communication and esthetic experience will open up when we conceive of tangibility in this bi-directional way? This paper presents a prototype system aimed at exploring these very questions. The prototype consists of a grid of tangible embedded cells, each one combining three kinds of actuators to produce divergent touch stimuli. All cells can be individually controlled from an interactive computer program. By providing a layering of different combinations and impulse intensities, the grid structure enables altering patterns of actuation. Thus it can be employed to explore a sort of individual touch aesthetic, for which - in order to differentiate it from established types of aesthetic experiences - we have created the term 'Euhaptics' (from the Greek ŒµœÖ = good and Œ¨œÄœÑœâ = touch, finger). The possibility to mix a wide range of actuators leads to blending options of touch stimuli. The sense of touch has an expanded perception- spectrum, which can be exploited by this technically embedded superposition. The juxtaposed arrangement of identical multilayered cell-units offers blending and pattern effects of different touch-stimuli. It reveals an augmented form of interaction with surfaces and interactive material structures. The combination of impulses does not need to be fixed a priori; it can be adjusted during the process of use. Thus the sensation of touch can be made personally unique in its qualities. The application on architectural shapes and surfaces allows the user to feel the sensations in a holistic manner ‚Äì potentially on the entire body. Hence the various dimensions of touch phenomena on the skin can be explored through empirical investigations by the prototype construction. The prototype system presented in the paper is limited in size and resolution, but its functionality suggests various directions of further development. In architectural applications, this new form of overlay may lead to create augmented environments that let inhabitants experience multimodal touch sensations. By interactively controlling the sensual patterns, such environments could get a unique ‚Äútouch‚Äù for every person that inhabit them. But there may be further applications that go beyond the interactive configuration of comfort, possibly opening up new forms of communication for handicapped people or applications in medical and therapeutic fields (Grunwald 2001). The well-known influence of touch- sensations on human psychological processes and moreover their bodily implications suggest that there is a wide scope of beneficial utilisations yet to be investigated.
keywords	Sensitive Voxel- A reactive tangible surface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia18_404
id	acadia18_404
authors	Clifford, Brandon; McGee, Wes
year	2018
title	Cyclopean Cannibalism. A method for recycling rubble
doi	https://doi.org/10.52842/conf.acadia.2018.404
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 404-413
summary	Each year, the United States discards 375 million tons of concrete construction debris to landfills (U.S. EPA 2016), but this is a new paradigm. Past civilizations cannibalized their constructions to produce new architectures (Hopkins 2005). This paper interrogates one cannibalistic methodology from the past known as cyclopean masonry in order to translate this valuable method into a contemporary digital procedure. The work contextualizes the techniques of this method and situates them into procedural recipes which can be applied in contemporary construction. A full-scale prototype is produced utilizing the described method; demolition debris is gathered, scanned, and processed through an algorithmic workflow. Each rubble unit is then minimally carved by a robotic arm and set to compose a new architecture from discarded rubble debris. The prototype merges ancient construction thinking with digital design and fabrication methodologies. It poses material cannibalism as a means of combating excessive construction waste generation.
keywords	full paper, cyclopean, algorithmic, robotic fabrication, stone, shape grammars, computation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ecaade2017_184
id	ecaade2017_184
authors	Almeida, Daniel and Sousa, José Pedro
year	2017
title	Tradition and Innovation in Digital Architecture - Reviewing the Serpentine Gallery Pavilion 2005
doi	https://doi.org/10.52842/conf.ecaade.2017.1.267
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 267-276
summary	Please write your aToday, in a moment when digital technologies are taking command of many architectural design and construction processes, it is important to examine the place and role of traditional ones. Designed by Álvaro Siza and Eduardo Souto de Moura in collaboration with Cecil Balmond, the Serpentine Gallery Pavilion 2005 reflects the potential of combining those two different approaches in the production of innovative buildings. For inquiring this argument, this paper investigates the development of this project from its conception to construction with a double goal: to uncover the relationship between analogical and digital processes, and to understand the architects' role in a geographically distributed workflow, which involved the use of computational design and robotic fabrication technologies. To support this examination, the authors designed and fabricated a 1:3 scale prototype of part of the Pavilion, which also served to check and reflect on the technological evolution since then, which is setting different conditions for design development and collaboration.bstract here by clicking this paragraph.
keywords	Serpentine Gallery Pavilion; Computational Design; Digital Fabrication; Wooden Construction; Architectural Representation;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2005_190
id	sigradi2005_190
authors	Ataman, Osman
year	2005
title	The digital architecture of tomorrow
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 190-193
summary	This paper presents an ongoing research project about the development of the materials and fabrication techniques for a fundamentally new class of architectural composite. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
series	SIGRADI
last changed	2016/03/10 09:47

_id	ijac20053202
id	ijac20053202
authors	Ataman, Osman
year	2005
title	Integrating Digital and Building Technologies: Towards a New Architectural Composite
source	International Journal of Architectural Computing vol. 3 - no. 2, 181-190
summary	This paper presents an ongoing research project about the development of the materials and fabrication techniques for a fundamentally new class of architectural composite. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia05_114
id	acadia05_114
authors	Due Schmidt, Anne Marie
year	2005
title	Navigating towards digital tectonic tools
doi	https://doi.org/10.52842/conf.acadia.2005.114
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 114-127
summary	The computer holds a great potential to break down the barriers between architecture and the technical aspects relating to architecture, thus supporting innovative architecture with an inner correspondence between form and technique. While the differing values in architecture and technique can seem like opposites, the term tectonics deals with creating a meaningful relationship between the two. The aim of this paper is to investigate what a digital tectonic tool could be and what relationship with technology it should represent. An understanding of this relationship can help us not only to understand the conflicts in architecture and the building industry but also bring us further into a discussion of how architecture can use digital tools. The investigation is carried out firstly by approaching the subject theoretically through the term tectonics and by setting up a model of the values a tectonic tool should encompass. Secondly the ability and validity of the model are shown by applying it to a case study of Jørn Utzon’s work on Minor Hall in Sydney Opera House - for the sake of exemplification the technical field focused on in this paper is room acoustics. Thirdly the relationship between the model of tectonics and the case will be compared and lastly a discussion about the characteristics of a tectonic tool and its implications on digital tectonic tools will be carried out.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	2005_771
id	2005_771
authors	Gavrilou, Evelyn, Bourdakis, Vassilis and Charitos, Dimitris
year	2005
title	Documenting the Spatial Design of an Interactive Multisensory Urban Installation
doi	https://doi.org/10.52842/conf.ecaade.2005.771
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 771-778
summary	The paper documents the design and implementation of an interactive multi-sensory environment (DETOUR) created by the interdisciplinary group VE_Design for an international open-air exhibition in Athens, Greece during the summer of 2004. The paper describes the creative process followed throughout the project and registers how computers, sensors and effectors have been utilised to either facilitate the creation of electronically mediated experiences or support the design. The architectural concept of the multi-sensory installation is analyzed in relation to its potential for creating communicative experiences as well as addressing physical form simulations. Notions such as ephemeral structures, parasites, social space, game as art and communication are discussed. The body – space interaction is investigated, enabling the team to elaborate on a modular construction. Finally, the impact of the work is discussed on the basis of recorded observations by visitors.
keywords	Interactive Multi-Sensory Environment; Ephemeral Space; Public Art;Embodied Spatial Experience; Simulation of Physical Form.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ijac20053204
id	ijac20053204
authors	Han, Seung-Hoon
year	2005
title	ARCH:DMUVR - A Working Prototype of a Distributed Collaborative Design System
source	International Journal of Architectural Computing vol. 3 - no. 2, 203-226
summary	This paper outlines a working prototype which suggests a distributed Computer-Aided Architectural Design (CAAD) system to promote a new model of collaborative design. Recently, there has been a growing interest in distributed CAAD integration due to the needs of direct collaboration among project participants. The potential for the integration of information is expected to have a tremendous impact on architecture and the construction industry. The aim of this research is to provide a new paradigm for a CAAD system by combining research on integrated CAAD applications with recent collaboration technologies. The proposed system has been designed and a prototype implemented to produce enough guidelines to foster interest in the development of future CAAD systems on the Internet. To this end, two different scopes of implementation are evaluated: first, global architecture and the functionality of a distributed CAAD system; and, second, the association of an architectural application to the system.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	cf2005_2_61_192
id	cf2005_2_61_192
authors	HOLZER Dominik, TANG Jiwu, XIE Mik2 and BURRY Mark
year	2005
title	Design Using Evolutionary Optimisation and Associative Geometry
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 243-254
summary	This paper describes the usage of parametric design and evolutionary optimisation techniques in architect-engineer collaborations. It discusses the apparent challenges in setting up a trans-disciplinary working-platform that cuts across profession-specific boundaries and negotiates between the otherwise distinct work-methodologies through the use of intelligent CAAD applications. Two approaches to architectural form finding have been combined in this research. The first, parametric design, uses a proprietary package as a key element to the organisation and reorganisation of architectural design. By doing so, it is providing it with intrinsic flexibility allowing designers to go beyond form and accommodate performance data for versioning. The second, ESO (Evolutionary Structural Optimisation), is an engineering tool based on the use of finite element analysis (FEA) capable of optimising the formal geometry of an object to obtain minimum volume under even stress-distribution through an iterative design process. In undertaking this research it became apparent that different levels of resolution need to be addressed in the form-finding process in order to investigate the full potential of the interactive use of parametric design and evolutionary optimisation. The case studies reflect this diversity and demonstrate more successes, limitations and future challenges within the transdisciplinary, collaborative effort.
keywords	associative geometry, evolutionary structural optimisation, architect engineer collaboration, finite element analysis
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	da71
id	da71
authors	Horne, Margaret
year	2004
title	Visualisation of Martyr’s Square, Beirut
source	CONVR2005 5th Conference of Construction Applications of Virtual Reality, ADETTI/ISCTE, Durham, UK, 12-13 September 2005
summary	Solidere, a Lebanese joint-stock company, was created by government decree in 1994 to reconstruct Beirut city-centre. The company, a form of public-private partnership, has a majority share holding of former owners and tenants of city-centre property. Several projects are underway, including the redevelopment of Place des Martyrs, once the bustling heart of Beirut but badly damaged during the war. Urban planners in Beirut have recently developed a 3D computer model to visually describe the spatial characteristics of Martyr’s Square and its context, prior to inviting design proposals for an international competition. This paper describes issues pertaining to the development of the model to meet the needs of urban designers and town planners. It also considers potential future uses of the simulation, outlining areas for further research and development.
keywords	Beirut, 3D Modelling, Visual Simulation, Town Planning
series	other
type	normal paper
email
last changed	2006/06/08 22:10

_id	acadia06_510
id	acadia06_510
authors	Johnson, Jason
year	2006
title	Complexity as a Creative Force in Design Variegation, Heterogeneity, Diversity
doi	https://doi.org/10.52842/conf.acadia.2006.510
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 510-517
summary	This paper describes an experimental project that attempts to use complexity as a creative and vital force within the design process. The project seeks to release architecture from its conventional role as a static urban backdrop and to transform it into a vital, dynamic, and active participant within cities. The project, entitled “Energy Farm”, was instigated by the 2005 International Open Design Competition for a “Performing Arts Island” located within the Han River in Seoul, Korea. Through the exploration of the site and program elements as an interacting matrix of fields, forces, and flows (energy, program, water flow, infrastructure, etc.), our proposal emerged as a variegated landscape marked by its capacities to produce its own energy, interweave heterogeneous threads of structure and program, and instigate a diverse set of scenarios in which physical and virtual realms coalesce. Architecture, in its unique capacity to bridge these realms, can release the rich computation potential of complexity into the physical realm. Within this scenario, architecture becomes a creative and vital agent for productive change with profound social, political, and ecological implications.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ddss2006-hb-187
id	DDSS2006-HB-187
authors	Lidia Diappi and Paola Bolchi
year	2006
title	Gentrification Waves in the Inner-City of Milan - A multi agent / cellular automata model based on Smith's Rent Gap theory
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 187-201
summary	The aim of this paper is to investigate the gentrification process by applying an urban spatial model of gentrification, based on Smith's (1979; 1987; 1996) Rent Gap theory. The rich sociological literature on the topic mainly assumes gentrification to be a cultural phenomenon, namely the result of a demand pressure of the suburban middle and upper class, willing to return to the city (Ley, 1980; Lipton, 1977, May, 1996). Little attempt has been made to investigate and build a sound economic explanation on the causes of the process. The Rent Gap theory (RGT) of Neil Smith still represents an important contribution in this direction. At the heart of Smith's argument there is the assumption that gentrification takes place because capitals return to the inner city, creating opportunities for residential relocation and profit. This paper illustrates a dynamic model of Smith's theory through a multi-agent/ cellular automata system approach (Batty, 2005) developed on a Netlogo platform. A set of behavioural rules for each agent involved (homeowner, landlord, tenant and developer, and the passive 'dwelling' agent with their rent and level of decay) are formalised. The simulations show the surge of neighbouring degradation or renovation and population turn over, starting with different initial states of decay and estate rent values. Consistent with a Self Organized Criticality approach, the model shows that non linear interactions at local level may produce different configurations of the system at macro level. This paper represents a further development of a previous version of the model (Diappi, Bolchi, 2005). The model proposed here includes some more realistic factors inspired by the features of housing market dynamics in the city of Milan. It includes the shape of the potential rent according to city form and functions, the subdivision in areal submarkets according to the current rents, and their maintenance levels. The model has a more realistic visualisation of the city and its form, and is able to show the different dynamics of the emergent neighbourhoods in the last ten years in Milan.
keywords	Multi agent systems, Housing market, Gentrification, Emergent systems
series	DDSS
last changed	2006/08/29 12:55

_id	ecaade2021_108
id	ecaade2021_108
authors	Romero, Rosaura Noemy Hernandez and Pak, Burak
year	2021
title	Understanding Design Justice in a Bottom-up Housing through Digital Actor-Network Mapping - The case of solidary mobile housing in Brussels
doi	https://doi.org/10.52842/conf.ecaade.2021.1.131
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 131-140
summary	This paper is a study of an ongoing housing project in Brussels (SMH) which involves bottom-up spatial occupation and 'making' by activists, activist architects, social workers and citizens. The particular focus of this paper is on the critical spatial agency of the citizens, activist-architects and artefacts for enabling architectural design justice (ADJ) in the SMH. Building on the Actor-Network Theory of Latour (2005) we developed an analytic method called Actor Link Mapping and Analysis (ALMA) which involves data collection from a wide range of network actors, the generation of a variety of digital network maps, making computational analysis, followed by workshops and interviews to discuss the findings. ALMA was used to recognize potential assets which are essential for design justice practices and networks. The analysis revealed the limits to community control of design processes and practices as well as limits to the conceptual links surrounding socio-spatial equality, thus limits to design justice in the SMH project. Our research also revealed a plethora of new roles and agencies in bottom-up housing production which were essential to understanding the dynamics and power distribution among the different actors.
keywords	Network Mapping; Network Analysis; Housing; Co-creation; Design Justice; Actor-Network Theory
series	eCAADe
email
last changed	2022/06/07 07:56

_id	2005_221
id	2005_221
authors	Sousa, José Pedro and Duarte, José Pinto
year	2005
title	Digital Desires, Material Realities
doi	https://doi.org/10.52842/conf.ecaade.2005.221
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 221-228
summary	Digital design and manufacturing technologies are progressively employed in building construction and architects interest in this field has grown widely, as many recent works, publications and scientific meetings demonstrate. By identifying some of the main reasons and expectations that were at the basis of the integration of CAD/CAM processes in the discipline, this paper examines the real success of these technological developments in contemporary architecture. By analyzing current work and literature the authors argue that there is often a discrepancy between the discourse on emerging new conditions for the practice, and the practical reality itself. To investigate this technological gap, the paper discusses in depth one of the most advocated promises of these new technologies: the feasible mass production of differentiation. Considering design intent, available CNC fabrication processes and material properties, it describes and critically analyses different strategies for building architectural surfaces, presenting specific examples from contemporary architecture. Realizing that there are technological limitations in the fulfillment of conceptual aspirations, this paper identifies possible innovative directions in building construction, based on the idea of structural performative surfaces. Finally, the authors reflect on the specific nature of architecture, distinguishing it from other areas that also employ digital technologies, to frame, from within the discipline, the technological expectations and its potential further developments.
keywords	CAD/CAM, Digital Fabrication, CNC Technologies, Rationalization, Mass-Customization
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2005_1_32_69
id	cf2005_1_32_69
authors	TAHRANI Souha, JALLOULI Jihen, MOREAU Guillaume and WOLOSZYN Philippe
year	2005
title	Towards a Virtual Reality Tool for Lighting Communication and Analysis in Urban Environments
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 115-124
summary	The objective of this paper is to evaluate the use of virtual reality as a potential decision-making tool to cognitively evaluate urban daylighting ambiences. This paper evaluates the solar effects visual perception in a real urban path in comparison to a virtual urban path in order to extract the characteristics of these effects and use them to figure out the necessary conditions for generating a physical and sensitive phenomena simulation. The comparison is based on questionnaires and interviews with participants on their judgements on sunlight during their walk through the chosen path. Our results highlight the relation between perception and the context of the urban environment, and prove that -in spite of its limits- virtual reality is able to simulate a large part of real solar effects.
keywords	virtual reality, 3D city modelling, environmental simulation, visual perception
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	ascaad2006_paper25
id	ascaad2006_paper25
authors	Artopoulos, Giorgos; Stanislav Roudavski and Francois Penz
year	2006
title	Adaptive Generative Patterns: design and construction of Prague Biennale pavilion
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This paper describes an experimental practice-based research project that considered design process, implementation and construction of a pavilion built to be part of the Performative Space section of the International Biennale of Contemporary Art, Prague 2005. The project was conceptualized as a time-bound performative situation with a parasite-like relationship to its host environment. Its design has emerged through an innovative iterative process that utilized digital simulative and procedural techniques and was formed in response to place-specific behavioral challenges. This paper presents the project as an in-depth case-study of digital methods in design, mass customization and unified methods of production. In particular, it considers the use of Voronoi patterns for production of structural elements providing detail on programming and construction techniques in relationship to design aspirations and practical constraints.
series	ASCAAD
email
last changed	2007/04/08 19:47

For more results click below: