Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 556

Reformat results as: short short into frame detailed detailed into frame

_id	6795
id	6795
authors	KOUZELEAS Stelios
year	2005
title	DEFINITION OF A METHOD OF LIMITS OF THE SIMPLIFICATION OF A HALL MODEL IN A CAD SYSTEM TO DIMINISH FALSIFICATION OF ACOUSTIC SIMULATION RESULTS
source	International Congress eCAADe 2005 (Education and research in Computer Aided Architectural Design in Europe), subject : “Digital Desing : the quest for new paradigms”, ISBN 0-9541183-2-4, pp. 695-704, Technical University of Lisbon, Portugal, 21-24 September 2005
summary	During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi-EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
series	other
type	normal paper
email
more	http://www.civil.ist.utl.pt/ecaade05/
last changed	2005/10/25 12:19

_id	d2a9
id	d2a9
authors	PAPADIMITRIOU Kimon, KOUZELEAS Stelios
year	2005
title	A METHOD FOR REAL TIME SPATIAL ANALYSIS OF SOUND VIA MODELING IN A CAD ENVIRONMENT, BASED ON ACOUSTICAL MEASUREMENTS
source	14th European Colloquium on Theoretical and Quantitative Geography,September 9-13, 2005, Tomar, Portugal
summary	Typical modeling systems for spatial analysis employ data that represent the visual part of a landscape (e.g. relief and morphology), combined with other data about specific attributes (depending on the aims of an application). Thus, in a modeling environment, each place is described by a variety of properties that are not always visible. More of those “hidden” properties require special sensors and/or instruments to be captured and sometimes make their presence evident through human senses, such is sound. The present study takes advantage of wide spread technologies (such as GPS, VHF telecommunications and field sensors) and methodologies that are commonly used in telegeoprocessing – telegeomonitoring in order to simulate an existing acoustic environment. The aim is to acquire real time data about the sound (referenced to a particular area) and manipulate them in a CAD environment with purpose to visualize the sound influence in a specific landscape. Specifically it is proposed a method that transfers spatial data (collected from the field), directly into a modeling system (in the office, or in situ). In sequence the data is processed adequately to feed the modeling system that describes the current sound intensity of a place.
keywords	Environmental Simulation, Soundscape, Real-time data acquisition, Real-time 3D modeling
series	other
type	normal paper
email
more	http://e-geo.fcsh.unl.pt/ectqg2005/
last changed	2005/10/25 11:10

_id	ad19
id	ad19
authors	Calderon, C., and Noble, R
year	2005
title	BEYOND MODELLING: AVANT-GARDE COMPUTER TECHNIQUES IN RESIDENTIAL BUILDINGS.
source	I Jornadas de Investigacion en Construccion, Madrid, 2-4 June, 2005.
summary	If the result of computer innovations can be interpreted as an emerging “difference” in the quality of constructed space, then in order to truly understand what future applications may be regarding architecture at present, we should look at what advanced functions are available in the process of designing forms and space (DeLuca and Nardini, 2002). Recently the so called parametric approach, a technique for describing a large class of designs with a small description in programming code, has become a focus of attention in architectural computing. In this paper, we reflect on the current use of parametric tools using real case studies as well as our own proof of concept parametric programmes and report on how the avant-garde computer techniques may help to increase the quality of residential building.
keywords	Building Quality, Parametric Design
series	other
type	normal paper
email
last changed	2005/12/02 11:42

_id	ijac20053101
id	ijac20053101
authors	Schieck, Ava Fatah; Penn, Alan; Mottram, Chiron; Strothmann, Andreas; Ohlenburg, Jan; Broll, Wolfgang; Aish, Francis; Attfield, Simon
year	2005
title	Interactive Space Generation through Play Exploring the Role of Simulation on the Design Table
source	International Journal of Architectural Computing vol. 3 - no. 1, 3-26
summary	In this paper we report on recent developments in the use of simulation as an aspect of design decision support for architecture and planning. This research is based on ARTHUR (Augmented Round Table for Architecture and Urban Planning). Although real time simulation has been incorporated in design support systems, little attention has been given to the simulation of pedestrian movement in collaborative AR based systems. Here we report on user evaluation tests of the ARTHUR system, which are focused on the effect of real time pedestrian simulation on the way pairs of designers work together.These tests suggest that the integration of simulated pedestrian movement on the design table plays a critical role in exploring possible design solutions and encourages different and new ways of thinking about design problems. Donald Schon's concept of the reflection-in-action provide a useful framework for interpreting these results.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	acadia05_170
id	acadia05_170
authors	Barker, Daniel and Dong, Andy
year	2005
title	A Representation Language for a Prototype CAD Tool for Intelligent Rooms
doi	https://doi.org/10.52842/conf.acadia.2005.170
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 170-183
summary	Intelligent rooms are a type of intelligent environment which enhance ordinary activities within the confines of a room by responding to human interaction using pervasive and ubiquitous computing. In the design of intelligent rooms, the specification of how the intelligent room enacts intelligent behavior through computational means is as integral as the geometric description. The self-aware and context-aware capabilities of intelligent rooms extend the requirements for computer-aided design tools beyond 3D modeling of objects. This article presents a Hardware as Agents Description Language for Intelligent Rooms (HADLIR) to model hardware in an intelligent room as “hardware agents” having sensor and/or effector modalities with rules and goals. End-users describe intelligent room hardware as agents based on the HADLIR representation and write agent rules and goals in Jess for each hardware component. This HADLIR agent description and the requisite software sensors/effectors constitute “hardware agents” which are instantiated into a multi-agent society software environment. The society is then bridged to either a virtual environment to prototype the intelligent room or to microelectronic controllers to implement a physical intelligent room. The integration illustrates how the HADLIR representation assists in the design, simulation and implementation of an intelligent room and provides a foundation technology for CAD tools for the creation of intelligent rooms.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2005_603
id	sigradi2005_603
authors	Castañé, Dora; Claudio Deho, Adrián Barcesat, Carlos Tessier
year	2005
title	Urbamedia: the design of an integrated system of urban-building visualization and communication
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 603-608
summary	This paper presents the advancements of the Urbamedia project which was designed as part of a research program at the Center CAO (Creation computer assist), School of Architectural Design and Urbanism, University of Buenos Aires, which was led by the valued master and advisory professor Architect Arturo F. Montagu. This proposal of the city of Buenos Aires on the Mayo Avenue expands the original historical fragment presented between the following two referenced representative landmarks: The Two Congresses Square and the Mayo Square. It continues with the advancement of methodologies and techniques implemented in a system of “integrated visualization and communication” for the development of a VRML (Virtual Reality Modeling Language) 3D virtual non-immersive and interactive vision. It also incorporates the development of a “foundation of digitally integrated knowledge” with fragments of central areas from other surrounding cities as well as interfaced phenomenological situations. The application of digital VRML technology has allowed for thoroughly researching the processes through dynamic simulation of specific urban fragments (Mayo Avenue within Buenos Aires) and the cities that are also participating in the project. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2006_565
id	caadria2006_565
authors	CHEN CHIEN TUNG
year	2006
title	DESIGN ON SITE: Portable, Measurable, Adjustable Design Media
doi	https://doi.org/10.52842/conf.caadria.2006.x.b7f
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 565-567
summary	Space designers usually look for information on site before proceeding design. They image any possibilities of design, while they are on site. Restricted to traditional design media, if they want to develop their ideas further, they have to go back to desks. This kind of design process can capture only part of information of the site. Why not do some developments directly when designers are on the site? That is the starting point of this paper. The whole situation of site is very complicated, so it is very difficult discussing all the possibilities. In order to understand how to design on site, reducing the variations is needed. Tsai and Chang (2005) proposed a prototype about design on site, which focuses on land forming. So I chose interior as the site to reduce the variation and have more controllable factors. Still there are many factors effecting design on site, scale is very unique and very important factor of them. Beginners are difficult to really feel how long it is on the plan drawing, and even most advanced VR equipment still can’t fully present the rich information on the site. To experience the site though body, the main idea is how to propose a portable device that can support space designer to do design on site directly, with intuitional body movement and precise scale, and get feedback immediately.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2005_695
id	2005_695
authors	Kouzeleas, Stelios Th.
year	2005
title	Definition of a Method of Limits of the Simplification of a Hall Model in a CAD System to Diminish Falsification of Acoustic Simulation Results
doi	https://doi.org/10.52842/conf.ecaade.2005.695
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 695-704
summary	During the modelling, because of the sometimes complex architectural shape of halls, we were forced to introduce simplifications in order to carry out calculations and simulation operations on these halls, as the calculation software requires plane surfaces. This paper presents a developed tool adapted on a CAD modelling system (AutoCAD), which defines an “average limits” of the model simplification operation in order to control and diminish the falsification of calculation and simulation results on this model, such as the architectural acoustic simulation. The process of the elaboration and the adjustment of the simplified models of the Grand Theatre of Bordeaux (GTB) based on acoustical measurements and their calculation results are described in detail in a previous article (Kouzeleas and Semidor, 2001). The analysis process of the consequences of the hall model simplification on the acoustical simulation results and the applied simplification methods are described in a PhD thesis (Kouzeleas, 2002). This article is based on this analysis process in order to apply it on several simplified models of the Amphitheatre of the Architecture School of Bordeaux (Amphi- EAPB). The comparison in a CAD system (AutoCAD) of the acoustical calculation results and the areas after simplification of the simplified models of these two halls made with AutoCAD, via the developed tool adapted on the AutoCAD, permit to define a “limits average of a hall model simplification” before the falsification of these calculation results.
keywords	Calculation Cad Program Integrated Development ; Design Process ; 3D Modeling ; Performance Simulation ; Acoustic Simulation Results
series	eCAADe
email
last changed	2022/06/07 07:52

_id	2005_349
id	2005_349
authors	Rafi, Ahmad, Izani, Mohd and Tinauli Musstanser
year	2005
title	High Dynamic Range Image (HDRI) Rendering
doi	https://doi.org/10.52842/conf.ecaade.2005.349
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 349-356
summary	This paper suggests a method known as High Dynamic Range Image (HDRI) to pre-visualise architectural elements in three-dimensional (3D) environment used by Computer Graphic Imaging (CGI) film-makers to integrate 3D models and characters into live action background (special effect). This Intensification Research Priority Area (IRPA) grant project was developed to suggest ways to achieve effective rendering solution and composition of the final output. It will focus on experimental modelling of local cultural elements that provides solutions for radiosity-type effects and dirt shadings. A set of data from an established site (i.e. environment) was captured and represented in High Dynamic Range (HDR) file. This data is integrated with architectural elements (e.g. 3D objects) and then pre-rendered to get the 3D visualisation of the actual environment. Several different exposures were also captured and tested to establish the correct rendering and lighting condition. This earlier result shows that HDRI method provides accurate visualisation and drastically reduces the rendering time without compromising the data (images) with accurate lighting. This paper will demonstrate the process of HDRI, compare the visual impact with ‘radiosity’ technique and other related rendering solutions and present the results, which are useful for architectural animation, simulation and other modelling developments.
keywords	HDRI, Pre-Visualisation, Modelling, Rendering
series	eCAADe
email
last changed	2022/06/07 07:59

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2005_a_2c_f
id	caadria2005_a_2c_f
authors	Somen Chakraborty, Uttam Kumar Banerjee
year	2005
title	Mathematical Models Representing Experts’ Evaluation for Layout of Small Dwelling Units
doi	https://doi.org/10.52842/conf.caadria.2005.228
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 228-233
summary	For the purpose of automated generation of room-layouts for dwelling units, all feasible plans that are generated during the process of generation of room-layouts are to be evaluated. Selection of a layout will be done based on some mathematical models for satisfaction values of users. In this paper we have shown models to obtain satisfaction values of dwellers primarily based on the opinion of experts who have experience in successfully designing or evaluating dwelling units as a part of mass housing in Kolkata region.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2005_1_32_69
id	cf2005_1_32_69
authors	TAHRANI Souha, JALLOULI Jihen, MOREAU Guillaume and WOLOSZYN Philippe
year	2005
title	Towards a Virtual Reality Tool for Lighting Communication and Analysis in Urban Environments
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 115-124
summary	The objective of this paper is to evaluate the use of virtual reality as a potential decision-making tool to cognitively evaluate urban daylighting ambiences. This paper evaluates the solar effects visual perception in a real urban path in comparison to a virtual urban path in order to extract the characteristics of these effects and use them to figure out the necessary conditions for generating a physical and sensitive phenomena simulation. The comparison is based on questionnaires and interviews with participants on their judgements on sunlight during their walk through the chosen path. Our results highlight the relation between perception and the context of the urban environment, and prove that -in spite of its limits- virtual reality is able to simulate a large part of real solar effects.
keywords	virtual reality, 3D city modelling, environmental simulation, visual perception
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2005_131
id	2005_131
authors	Bailey, Rohan
year	2005
title	Digital Tools for Design Learning
doi	https://doi.org/10.52842/conf.ecaade.2005.131
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
summary	There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords	Design Education, Digital Design, Teaching Tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac20053104
id	ijac20053104
authors	Fischer, Thomas
year	2005
title	Teaching Programming for and with Microcontroller-Enhanced Physical Models
source	International Journal of Architectural Computing vol. 3 - no. 1, 57-74
summary	As processes of use, interaction and transformation take center stage in various fields of design, electronic sensors, controllers, displays and actuators can significantly enhance the value of physical models. These technologies allow the development of novel computer interfaces for new kinds of interaction with virtual models, and in the future they can be expected to play an important role in the development of new types of active building components and materials for automated construction and dynamic runtime adaptations of inhabitable environments. However, embedding programmed logic into physical objects involves skills outside the traditional domains of expertise of designers and model makers and confronts them with a steep learning curve. The wide variety of alternative technologies and development tools available in this area has a particularly disorienting effect on novices. However, some early experiences suggest that mastery of this learning curve is easily within reach, given some basic introduction, guidance and support. To assist design students in acquiring a basic level of programming knowledge, better educational programming tools are still required. It is the intent of this paper to provide designers and educators with a starting point for explorations into this area as well as to report on the development of an educational approach to electronics programming called haptic programming.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	4781
authors	Howard, R.
year	1997
title	Using multimedia to link experts' views and derive common conclusions
source	Automation in Construction 6 (1) (1997) pp. 3-9
summary	Few publications on technology are read from start to finish and, where a broad subject is covered, only part of the content is relevant to a particular reader. Facilities such as multimedia and hypertext allow documents from different sources and containing various forms of data to be linked into a report which can be published electronically. Those who access a report, such as Building IT 2005, can then go direct to the topics of particular interest, visit related topics and background data, or search the text for particular terms. The most appropriate medium can be used whether text, data, images or video, and useful material extracted for teaching or research. Actions can be linked back to the papers in which they were recommended so that, while conclusions are presented compactly, the full context and the credentials of the author can be seen.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	2006_566
id	2006_566
authors	Rafi, Ahmad; Mohamad Izani Zainal Abidin; Avijit Paul and Aishah Abdul Razak
year	2006
title	Simulation of architectural lighting in a virtual environment - A case study on real and fake High Dynamic Range Images (HDRI)
doi	https://doi.org/10.52842/conf.ecaade.2006.566
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 566-572
summary	The early findings of this research were presented in eCAADe 2005 International Conference, Lisbon primarily to highlight the concept of High Dynamic Range Images (HDRI) when representing architectural spaces in the form of still images. An experiment had been carried out to compare the results between HDRI rendering and ‘conventional’ lighting simulation algorithms namely ray tracing and radiosity. The results were based on static and using the same exposure factors, when capturing HDRI. This project, funded by Intensification Research Priority Area (IRPA) grant continues to present and report HDRI results in a simulation environment. In this paper, we first briefly explain on the concept of real and fake HDRI. Then a comparison experiment is conducted to compare these two methods and discuss the impact and effectiveness of the illumination computation in architectural simulation environment. In order to carry out the experiment, a few models of the architectural scenes were developed. These models were then textured with real photos and manipulated with ‘shaders’, and further rendered using fake and real HDRI techniques. As for the fake HDRI, two methods were developed. The first was using an image as the ambient map and different exposures were created by increasing the value of Hue, V of HSV and saturation. The second involved a series of digital photos with the selection of the brightest and darkest area using Adobe Photoshop to establish the scale of luminosity. A few camera movements were triggered and position for ‘real-time’ rendering simulation. The result of the experiment has shown a significant improvement on the rendering time and quality of the rendering. Finally this paper suggests the selection criteria for choosing real and fake HDRI, and how each technique can be best utilized for architectural representations in a simulation environment.
keywords	HDRI; simulation; Real HDRI;Fake HDRI; illumination computation
series	eCAADe
email
last changed	2022/06/07 07:59

_id	cf2005_1_64_168
id	cf2005_1_64_168
authors	ACHTEN Henri
year	2005
title	Resolving some Ambiguities in Real-time Design Drawing Recognition by means of a Decision Tree for Agents
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 311-320
summary	In this paper, we present a theoretical study on automated understanding of the design drawing. This can lead to design support through the natural interface of sketching. In earlier work, 24 plan-based conventions of depiction have been identified, such as grid, zone, axial system, contour, and element vocabulary. These are termed graphic units. Graphic units form a good basis for recognition of drawings as they combine shape with meaning. We present some of the theoretical questions that have to be resolved before an implementation can be made. The contribution of this paper is: (i) identification of domain knowledge which is necessary for recognition; (ii) outlining combined strategy of multi-agent systems and online recognition; (iii) functional structure for agents and their organisation to converge on sketch recognition.
keywords	multi-agent system, decision tree, pattern recognition, sketch
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2005_083
id	2005_083
authors	Agostinho, Francisco Santos
year	2005
title	Architecture as Drawing, Perception and Cognition
doi	https://doi.org/10.52842/conf.ecaade.2005.083
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 83-90
summary	This work is about realizing that human perception is inherent to architecture. It is an asset and a trait subject to training and development in an empirical way, involving physical and manual action. It cannot be taught literally through convention and logic reasoning. It is a human achievement of great significance built on intellectual and scientific knowledge. It is something, being physical and empirical, that is supported on instrumental procedure. The computer, as a machine and an instrument, does not shorten the empirical experience of manipulation; on the contrary, it enhances J.J. Gibson’s findings about the perception of space in relation to eye and body movement. Being a cybernetic machine the computer may, and shall, evolve, and become perceptive. In order for that to happen, it is important to keep in mind the mechanism of human perception. Through producing a computerized model of a major architectural work, we develop natural knowledge about its physical features and the thought that lies underneath. To be able to use the computer as an instrument provides a user with explicit knowledge about its ways and mechanism that has to be made available. It involves training, which is to a great extent self-explanatory, and also explicit knowledge about the conventions that are being used, such as programming, reasoning and trigonometry.
keywords	Visualization; Environmental Simulation; Knowledge Modelling (KM); 3D Modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

For more results click below: