Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 14 of 14

Reformat results as: short short into frame detailed detailed into frame

_id	2005_253
id	2005_253
authors	Breen, Jack and Stellingwerff, Martijn
year	2005
title	Towards Ornamatics
doi	https://doi.org/10.52842/conf.ecaade.2005.253
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 253-260
summary	Computer aided modelling and drafting protocols – in combination with new production technologies – have contributed to wholly new ways of shaping building elements. Some examples of new techniques, which have recently become very successful in building production and in architectural design education, are: 3D Rapid Prototyping; 2,5D and 3D Milling and computer aided Shape Cutting (notably using laser and water jet modes). Such new approaches not only create new opportunities for traditional production processes (including physical modelling), they also offer new perspectives for design and manufacturing on the level of architectural components and connections. We foresee innovative approaches to building product design, with a renewed interest in expressive Ornamentation. A phenomenological development we would like to address using the concept of ‘Ornamatics’. This contribution explores the potentials of product design with a renewed focus on ornamentation, involving the active utilization of computer aided modelling and manufacturing techniques. The paper furthermore documents results and findings of a series of explorative studies carried out within an educational laboratory environment.
keywords	Design Driven Research; Computer Aided Fabrication; Aesthetics; Ornamentation; Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac20053306
id	ijac20053306
authors	Cabral Filho, Jose dos Santos
year	2005
title	Digital Art A Field of Inquiry for Contemporary Architecture
source	International Journal of Architectural Computing vol. 3 - no. 3, 355-372
summary	This article investigates the interplay of digital technology, art and architecture and it presents a series of experimental workshops developed at LAGEAR (Graphic Laboratory for the Experience of Architecture, School of Architecture at UFMG, Brazil). The intention of these workshops is to include an artistic approach to the work in a computer lab dedicated to teaching and researching architecture. At first, a discussion on the relationship between art and architecture is presented, followed by an analysis of the enhancement of such relationship with the advent of digital technology. Then a series of works developed by artists and students in collaboration is described. The article concludes with a discussion on the role of digital art for architectural education. It is proposed that it may be one of the most adequate fields for students to freely investigate contemporary issues, such as interactivity and automation, which are now shaping our built environment.
series	journal
more	http://www.ingentaconnect.com/search/expand?pub=infobike://mscp/ijac/2005/00000003/00000003/art00007
last changed	2007/03/04 07:08

_id	1375
id	1375
authors	Coyne, Richard
year	2005
title	Cornucopia Limited: Design and Dissent on the Internet
source	MIT Press: Cambridge, Mass
summary	The Internet provides a remarkable demonstration of the persistence of the gift in contemporary commerce. Net enthusiasts seem prepared to donate much to the common good. This generous spirit ought to strike resonances with the culture of design, which generally promotes a creative ethos of generosity, conspicuous display, and exuberance. But the cornucopia of the gift economy is offset by net culture's recent leanings towards consumerism. This book challenges the supposed gift society of the Internet, and supplants the gift by a more compelling metaphor, enjoyed in certain quarters of contemporary design, that of theft, rule breaking, and transgression. The relationship between design thinking and the network economy is characterized by the reckless spirit of the trickster, the crosser of boundaries, and the malingerer in the hybrid and uncertain condition of the threshold. The book thus presents a designer's view of the network economy, drawing on insights from design theorists, economists, philosophers and cultural theorists. It provides valuable insights for theorists of human-computer interaction, architects, designers, and those interested in registering the source and direction of the impulse to create, innovate, and design. The book examines five metaphors: household, machine, game, gift and threshold. Economic theory is grounded in the household. The romantics and Marx claimed that labor is dominated by the rampant machinery of capitalism. The computer game represents a potent exemplar of new media economics. The gift is presented as precursor to commercial exchange. Coyne subjects each metaphor to scrutiny in terms of how it deals with the threshold, in other words as it is dissected by the cynic or manipulated by the trickster, and other liminal dwellers in the network economy. 'What’s shaping the culture of the Internet? This turns out to be a surprisingly tricky question, one that Richard Coyne explores with verve and erudition.' --Albert Borgmann, author of Holding On to Reality
keywords	design computing digital media economics threshold trickster e-commerce
series	book
type	normal paper
email
last changed	2006/05/27 18:21

_id	cf2005_1_61_209
id	cf2005_1_61_209
authors	LEE Chia-Hsun, HU Yuchang and SELKER Ted
year	2005
title	iSphere: A Proximity-based 3D Input Interface
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 281-290
summary	This paper presents a 24 degree of freedom input device for 3D modeling. iSphere uses the proximity information of pulling-out and pressing-in capacitive sensors to manipulate 12 control points of a 3D surface simultaneously . The iSphere dodecahedron is demonstrated manipulating an analog parametric model with high-level modeling concepts like push or pull the 3D surfaces. Our pilot experiment shows that iSphere saved many steps of selecting the control point and going through menus. Experts were used to those extra steps and still found themselves doing them but novices saved significant time for surface shaping tasks. 3D systems are benefited to execute high-level modeling commands, but lacking of fidelity is a great issue of analog input device.
keywords	3D input device, proximity sensing, parametric modeling, human-computer interaction
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	sigradi2005_097
id	sigradi2005_097
authors	Luhan, Gregory A.
year	2005
title	At Full-Scale \| From Installation to Inhabitation
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 97-102
summary	In 1999, the University of Kentucky (then the College of Architecture, now the College of Design-School of Architecture) established a Digital Design Studio to combine the strong tradition of handcrafting in the existing design program with those technologically sophisticated tools shaping the profession for the 21st century. Over a six-year period, this all-digital design studio has developed from a pedagogical model for developing new different ways of seeing and making architecture to a proof-of-concept real-world experience to coalesce state-of-the-art visualization techniques with current expectations of practice. Creating dynamic links between students, industry, and the profession has enabled the School of Architecture to provide leadership for practicing architects, to create an effective dialogue between industrial and design professionals, and to incorporate successfully leading-edge design pedagogy with the more technological applications that will shape the future of architecture practice. The materials presented here reflect a sequence of comprehensive digital projects produced under my direction from 1999 through 2005.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2012_30
id	sigradi2012_30
authors	Angeluzzi, Gustavo; Hanns, Daniela Kutschat
year	2012
title	Um levantamento de requisitos gerais para o desenvolvimento e posicionamento de DOOTERS – um aplicativo lúdico de listas de tarefas para iPhone [A survey of general requirements for developing and positioning DOOTERS - a to-do list application for iPhone]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 191-195
summary	DOOTERS is a to-do list application for iPhone which entertains and motivates the user to get things done. It was developed based on requirements obtained trough: 1. the study of several personal information organizing methods (Covey, 1989; Allen, 2005; Foster, 2006); 2. answers to a task lists user focused questionnaire; 3. observation of to-do list users while creating lists and organizing tasks; 4. comparison of digital and non-digital task list media (paper, computer and mobile device); 5. analysis of profiles, behaviors and to-do list applications for iPhone. In this paper, the authors present the process of obtaining requirements for developing and positioning DOOTERS.
keywords	information and interface design, requirements, to-do list application, iPhone, DOOTERS
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2005_000
id	sigradi2005_000
authors	Angulo, Antonieta and Vásquez de Velasco, Guillermo (eds.)
year	2005
title	SiGradi2005: Vision and Visualization
source	Proceedings of the 9th Iberoamerican Congress of Digital Graphics Graphics / ISBN 978-1-59975-306-5] Lima (Perú) 21-23 november 2005, 826 p.
summary	Paradoxically, one of the most difficult but enjoyable things we do is to imagine. To open the eyes of our mind and see what no one else can see. We see images of things that are yet to be and through the same skill we devise ways in which to make them happen. We design the future in the form of environments, graphics, products, films, and a growing range of new media. Our ability to develop a vision and to visualize it is a gift that we are called to cultivate and put to good use. We have been privileged with a great responsibility. In the process of developing a vision and communicating that vision to others, we “visualize”. Visualization can be a very private experience in which we are alone with mental images that help us shape our vision. In other instances visualization can be a component of mass communication. Visualization can be a means or can be an end. It can be a small architectural sketch on a paper napkin or a mega-graphic covering a high-rise building, an airplane or a ship. In every case, the relationship between vision and visualization is a mutually supportive articulation of what our eyes and our minds can see. Our vision of the role of computers in the art and science of visualization is in constant development. Computer visualization can support an intimate dialog between a designer and his/her vision. It can translate and communicate that vision to a larger audience and in the hands of a new-media artist it can actually constitute his/her vision. The 9th Annual Conference of SIGraDI (Ibero American Society for Computer Graphics) will explore our collective vision on the future of digital visualization and digital media in Environmental Design, Product Design, Graphic Design, Cinematography, New Media, and Art. Authors are invited to share their research work with a focus on how it contributes to shape a collective understanding of the past, awareness of the present, and vision of the future in our multiple disciplines.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2005_a_7b_c
id	caadria2005_a_7b_c
authors	Chang, Chuang-Ting
year	2005
title	Some Phenomena of Touch in Study Models
doi	https://doi.org/10.52842/conf.caadria.2005.277
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 277-287
summary	The senses of “Touch” bring people the feeling of reality, and human beings can always naturally sense the tactile impression. Hence we touch things and our sense tells us that our hands are touching something (Hinckley et al. 1999). Comparing to the tools used by designers between traditional and new digital media in the design process, the most difference is in the sense of touch. This paper focuses on the sense of touch to point out the haptic experience which have ignored by the past in design process. Four phenomena will be discussed in details and some useful suggestions given for future study.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2005_738
id	sigradi2005_738
authors	Gatermann, Harald
year	2005
title	Educational Parcours for Architectural Photography
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 738-742
summary	Our didactical concept is based on the idea of simulating photographical techniques by using a set of mock-up situations, created with a common CAAD- and visualisation-software (Artlantis).The didactic program (and the mock-up-“parcours“) starts with a two-dimensional object, found on different places in the city or on the campus: an „advertising panel“. With any kind of camera it is possible to take a picture of sufficient quality. When taking the real photo, students have to deal with different points of view, different inclinations of the camera and different zoom-adjustments. When they present their results in digital form, they also have to deal with disappointments in form of distortions of their lenses. The CAD-model of the same situation (professional photographers use the terminus, mock-up“) shows parallels in using different points of view, different zoom-adjustments. Our experience in using this kind of mock-up-simulation is very positive: students develop a new sight to things and procedures which intensifies their consciousness and their knowledge of photographical and architectural situations.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	cdc2008_243
id	cdc2008_243
authors	Loukissas, Yanni
year	2008
title	Keepers of the Geometry: Architects in a Culture of Simulation
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 243-244
summary	“Why do we have to change? We’ve been building buildings for years without CATIA?” Roger Norfleet, a practicing architect in his thirties poses this question to Tim Quix, a generation older and an expert in CATIA, a computer-aided design tool developed by Dassault Systemes in the early 1980’s for use by aerospace engineers. It is 2005 and CATIA has just come into use at Paul Morris Associates, the thirty-person architecture firm where Norfleet works; he is struggling with what it will mean for him, for his firm, for his profession. Computer-aided design is about creativity, but also about jurisdiction, about who controls the design process. In Architecture: The Story of Practice, Architectural theorist Dana Cuff writes that each generation of architects is educated to understand what constitutes a creative act and who in the system of their profession is empowered to use it and at what time. Creativity is socially constructed and Norfleet is coming of age as an architect in a time of technological but also social transition. He must come to terms with the increasingly complex computeraided design tools that have changed both creativity and the rules by which it can operate. In today’s practices, architects use computer-aided design software to produce threedimensional geometric models. Sometimes they use off-the-shelf commercial software like CATIA, sometimes they customize this software through plug-ins and macros, sometimes they work with software that they have themselves programmed. And yet, conforming to Larson’s ideas that they claim the higher ground by identifying with art and not with science, contemporary architects do not often use the term “simulation.” Rather, they have held onto traditional terms such as “modeling” to describe the buzz of new activity with digital technology. But whether or not they use the term, simulation is creating new architectural identities and transforming relationships among a range of design collaborators: masters and apprentices, students and teachers, technical experts and virtuoso programmers. These days, constructing an identity as an architect requires that one define oneself in relation to simulation. Case studies, primarily from two architectural firms, illustrate the transformation of traditional relationships, in particular that of master and apprentice, and the emergence of new roles, including a new professional identity, “keeper of the geometry,” defined by the fusion of person and machine. Like any profession, architecture may be seen as a system in flux. However, with their new roles and relationships, architects are learning that the fight for professional jurisdiction is increasingly for jurisdiction over simulation. Computer-aided design is changing professional patterns of production in architecture, the very way in which professionals compete with each other by making new claims to knowledge. Even today, employees at Paul Morris squabble about the role that simulation software should play in the office. Among other things, they fight about the role it should play in promotion and firm hierarchy. They bicker about the selection of new simulation software, knowing that choosing software implies greater power for those who are expert in it. Architects and their collaborators are in a continual struggle to define the creative roles that can bring them professional acceptance and greater control over design. New technologies for computer-aided design do not change this reality, they become players in it.
email
last changed	2009/01/07 08:05

_id	2005_357
id	2005_357
authors	Pita, Javier
year	2005
title	Analogous Models and Architecture
doi	https://doi.org/10.52842/conf.ecaade.2005.357
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 357-364
summary	Among the many possible ways of classifying the concept of “modelling”, Maldonado refers to “homologies” when structure but not shape and function are similar; “analogies” when structure and function are similar, but not shape; and “isomorphisms” when structure and shape are similar, but function may or may not be similar. Traditional artistic representation would basically fall into the category of isomorphisms, whilst analogous models are to be found mainly in activities such as magic, play or industry. Other ways of representing reality, such as architectural models or drawings, are also traditionally regarded as isomorphisms. In the course of the last century, this panorama has been altered somewhat by the post-industrial or second industrial revolution in computing and communications. Using mathematical algorithms, the computing tool has an enormous capacity to describe things of extremely diverse nature: from the shape of everyday objects to relatively complex human behaviours, these can all be described using the common language of bits. Alongside developments in computing, the world of communications has been providing us with increasingly advanced means of transmitting information, including sophisticated systems capable of emulating our own perceptions. This paper is intended as a contribution to the theoretical debate conducted over recent years on the considerable shift that has occurred in architectural representation techniques. The analysis that follows highlights a two-fold change in traditional representation techniques: on the one hand, a change in the nature of the model (as is discussed in this paper); and on the other, a modification of the interfaces or communication and perception mechanisms of the model. The conjunction of these two factors has led to the emergence of representation modes that can no longer be regarded simply as isomorphisms of reality. Insofar as virtual spaces have the capacity for us to move, to interact, in short to inhabit them, they should be regarded as “analogous models” of architectural space. In other words, there has been a shift away from representation modes based on illusion in favour of those based on simulation.
keywords	Representation, Models, Virtual Space, Virtual Reality
series	eCAADe
email
last changed	2022/06/07 08:00

_id	cf2011_p115
id	cf2011_p115
authors	Pohl, Ingrid; Hirschberg Urs
year	2011
title	Sensitive Voxel - A reactive tangible surface
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 525-538.
summary	Haptic and tactile sensations, the active or passive exploration of our built surroundings through our sense of touch, give us a direct feeling and detailed information of space, a sense of architecture (Pallasmaa 2005). This paper presents the prototype of a reactive surface system, which focuses its output on the sense of touch. It explains how touch sensations influence the perception of architecture and discusses potential applications that might arise from such systems in the future. A growing number of projects demonstrate the strong impact of interaction design on the human senses and perception. They offer new ways of sensing and experiencing architectural space. But the majority of these interaction concepts focus on visual and auditory output-effects. The sense of touch is typically used as an input generator, but neglected as as a potential receiver of stimuli. With all the possibilities of sensors and micro-devices available nowadays, there is no longer a technical reason for this. It is possible to explore a much wider range of sense responding projects, to broaden the horizon of sensitive interaction concepts (Bullivant 2006). What if the surfaces of our surroundings can actively change the way it feels to touch them? What if things like walls and furniture get the ability to interactively respond to our touch? What new dimensions of communication and esthetic experience will open up when we conceive of tangibility in this bi-directional way? This paper presents a prototype system aimed at exploring these very questions. The prototype consists of a grid of tangible embedded cells, each one combining three kinds of actuators to produce divergent touch stimuli. All cells can be individually controlled from an interactive computer program. By providing a layering of different combinations and impulse intensities, the grid structure enables altering patterns of actuation. Thus it can be employed to explore a sort of individual touch aesthetic, for which - in order to differentiate it from established types of aesthetic experiences - we have created the term 'Euhaptics' (from the Greek ŒµœÖ = good and Œ¨œÄœÑœâ = touch, finger). The possibility to mix a wide range of actuators leads to blending options of touch stimuli. The sense of touch has an expanded perception- spectrum, which can be exploited by this technically embedded superposition. The juxtaposed arrangement of identical multilayered cell-units offers blending and pattern effects of different touch-stimuli. It reveals an augmented form of interaction with surfaces and interactive material structures. The combination of impulses does not need to be fixed a priori; it can be adjusted during the process of use. Thus the sensation of touch can be made personally unique in its qualities. The application on architectural shapes and surfaces allows the user to feel the sensations in a holistic manner ‚Äì potentially on the entire body. Hence the various dimensions of touch phenomena on the skin can be explored through empirical investigations by the prototype construction. The prototype system presented in the paper is limited in size and resolution, but its functionality suggests various directions of further development. In architectural applications, this new form of overlay may lead to create augmented environments that let inhabitants experience multimodal touch sensations. By interactively controlling the sensual patterns, such environments could get a unique ‚Äútouch‚Äù for every person that inhabit them. But there may be further applications that go beyond the interactive configuration of comfort, possibly opening up new forms of communication for handicapped people or applications in medical and therapeutic fields (Grunwald 2001). The well-known influence of touch- sensations on human psychological processes and moreover their bodily implications suggest that there is a wide scope of beneficial utilisations yet to be investigated.
keywords	Sensitive Voxel- A reactive tangible surface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20053105
id	ijac20053105
authors	Pranovich, Slava; Achten, Henri; de Vries, Bauke; van Wijk, Jack
year	2005
title	Structural Sketcher: Representing and applying well-structured graphic representations in early design
source	International Journal of Architectural Computing vol. 3 - no. 1, 75-92
summary	Computational drawing support has the potential to improve design support in the early phase. Much work in this area is devoted to input of design information, manipulation, and presentation. Based on a review of current work, we note that among other things, digital drawing tools should be close to the conventions and techniques already used by architects. This is, in principle, possible by processing strokes in a more or less traditional sketch approach, or by offering specialised commands that provide a direct implementation of such conventions. The latter approach is covered by Structural Sketcher. A subset of drawing conventions developed earlier, called graphic units, is adopted within the system. In order to contribute to design support, the application of such graphic units should be fast and intuitive, and the definition of internal relationships should be quick and straightforward. For intuitive manipulation, Structural Sketcher incorporates the "paper and scissors" metaphor, and introduces a novel UI-concept called the KITE. To achieve an easy and fast maintenance of relationships, a graph based on anchor-points is built-up on the fly. Performance of the system has been tested on a quantitative and qualitative basis. The system shows the benefit that graphic units can bring to drawing support, and how these can be implemented. To conclude, limitations and further work are discussed.
series	journal
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

No more hits.