Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 553

Reformat results as: short short into frame detailed detailed into frame

_id	2005_303
id	2005_303
authors	Clark, Steve and Maher, Mary Lou
year	2005
title	Learning and Designing in a Virtual Place
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 303-309
doi	https://doi.org/10.52842/conf.ecaade.2005.303
summary	This paper reports on a study of the role of place in a virtual learning environment for digital media design. Using an immersive 3D Virtual World based on Active Worlds, we have created a virtual learning place for students in a Website Design course. The virtual learning place has two distinct parts: a classroom-like place surrounded by student galleries. Students can navigate and communicate (synchronous chat) within the environment in the form of an avatar (virtual person). We recorded the conversations and activities of the students in discussions held in the virtual learning place and applied a communication coding scheme to analyze their discussions. In this paper we present our approach to developing an understanding of the role of place and evidence of its effect on the conversations of design students in a virtual learning environment. We show how we identified the characteristics of place and specifically how it provides a context for identity and presence for supporting collaborative and constructivist student centred learning.
keywords	Virtual Learning Environments, Place, Virtual Design Studios
series	eCAADe
email
last changed	2022/06/07 07:56

_id	2005_037
id	2005_037
authors	Côté, Pierre, Léglise, Michel and Estévez, Daniel
year	2005
title	Virtual Architecture as Representation for Creative Design Process - Through a Collaborative eDesign Studio
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 37-45
doi	https://doi.org/10.52842/conf.ecaade.2005.037
summary	Using Virtual Architecture (VA) as a general scheme for representations to sustain the reflection activities involved in the design process can help students to initiate creative design ideas. Because of its implicit abstract nature, VA can be used, to represent original ideas or processes, or well-known architectural theories to articulate design ideas. Furthermore, VA as a mean of expression, turn out to be a source of inspiration for students who perceive it as medium with very few limits with which to develop, explore and express their design intuitions. A recent collaborative edesign studio experience is reported to illustrate the benefit observed. Using three examples out of ten student projects, we show how designs and design process have been characterized by those virtual representations. In fall semester 2004, the edesign studio took place between the Schools of Architecture of Toulouse and Université Laval in Québec. VA was both an academic and a studio topic at Laval while the other school students had a traditional design task to tackle, namely the rehabilitation of Chapou University Residences for students in Toulouse. Students from both schools composed each edesign team. In addition, three common architectural themes were web-documented and introduced to both classes: room, as defined by Louis Kahn: “a space which knows what it wants to be is a room”; color, as an architectural medium in dialectic with structure; and body-space relationships, as articulated by Gilles Deleuze and its projection to cyberspace. From the edesign studio results, we are arguing that virtual architecture should be looked at not only as new domain to be investigated by architects and taught in academic studios but also as a new medium of design to develop and explore design intuitions through virtual representations.
keywords	Virtual Architecture; Virtual Representations; Medium; eDesign; Design by Collaboration
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2005_755
id	sigradi2005_755
authors	Mántaras, Guillermo J.
year	2005
title	Virtual unreality
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 755-759
summary	What will be waiting for the man of a virtual, parallel world, conceived by another man? Inasmuch as a virtual atmosphere does not possess weather, there is no day or nights, simply there is no sky, and if there is neither sky nor ground it does not have an above or below and of course there is no gravity. In such case why would we need walls and windows? Would we need streets to circulate? Why would we walk or fly? Today, digital media bring the necessary tools to shape, to represent and to live impossible experiences within a world where all imaginable phenomena is possible. Our experience aims to explore an approach of the student towards the new processes of design in order to contrive new spaces, taking care of not falling in an exclusively aesthetic objective but reflecting on the characteristics and qualities that a virtual space and its matter must have. In order to be able to conceive them we must use and teach digital media stimulating the students to harness its “non-reality”. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cdc2008_243
id	cdc2008_243
authors	Loukissas, Yanni
year	2008
title	Keepers of the Geometry: Architects in a Culture of Simulation
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 243-244
summary	“Why do we have to change? We’ve been building buildings for years without CATIA?” Roger Norfleet, a practicing architect in his thirties poses this question to Tim Quix, a generation older and an expert in CATIA, a computer-aided design tool developed by Dassault Systemes in the early 1980’s for use by aerospace engineers. It is 2005 and CATIA has just come into use at Paul Morris Associates, the thirty-person architecture firm where Norfleet works; he is struggling with what it will mean for him, for his firm, for his profession. Computer-aided design is about creativity, but also about jurisdiction, about who controls the design process. In Architecture: The Story of Practice, Architectural theorist Dana Cuff writes that each generation of architects is educated to understand what constitutes a creative act and who in the system of their profession is empowered to use it and at what time. Creativity is socially constructed and Norfleet is coming of age as an architect in a time of technological but also social transition. He must come to terms with the increasingly complex computeraided design tools that have changed both creativity and the rules by which it can operate. In today’s practices, architects use computer-aided design software to produce threedimensional geometric models. Sometimes they use off-the-shelf commercial software like CATIA, sometimes they customize this software through plug-ins and macros, sometimes they work with software that they have themselves programmed. And yet, conforming to Larson’s ideas that they claim the higher ground by identifying with art and not with science, contemporary architects do not often use the term “simulation.” Rather, they have held onto traditional terms such as “modeling” to describe the buzz of new activity with digital technology. But whether or not they use the term, simulation is creating new architectural identities and transforming relationships among a range of design collaborators: masters and apprentices, students and teachers, technical experts and virtuoso programmers. These days, constructing an identity as an architect requires that one define oneself in relation to simulation. Case studies, primarily from two architectural firms, illustrate the transformation of traditional relationships, in particular that of master and apprentice, and the emergence of new roles, including a new professional identity, “keeper of the geometry,” defined by the fusion of person and machine. Like any profession, architecture may be seen as a system in flux. However, with their new roles and relationships, architects are learning that the fight for professional jurisdiction is increasingly for jurisdiction over simulation. Computer-aided design is changing professional patterns of production in architecture, the very way in which professionals compete with each other by making new claims to knowledge. Even today, employees at Paul Morris squabble about the role that simulation software should play in the office. Among other things, they fight about the role it should play in promotion and firm hierarchy. They bicker about the selection of new simulation software, knowing that choosing software implies greater power for those who are expert in it. Architects and their collaborators are in a continual struggle to define the creative roles that can bring them professional acceptance and greater control over design. New technologies for computer-aided design do not change this reality, they become players in it.
email
last changed	2009/01/07 08:05

_id	sigradi2005_321
id	sigradi2005_321
authors	Almeida da Silva, Adriane Borda; Ana Lúcia Pinho Lucas, Ricardo Silveira
year	2005
title	Defining a process of design and learning of digital graphics by means of distance education
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 321-326
summary	This paper describes and analyses the teaching/learning approach which progressively is being established in the context of the Digital Graphics Post-Graduation Course. The method used has, basically, generated educational situations able to increase the self-learning capacity of the students; develop skills for collaborative activities to build the knowledge and overtake the limits of time and space imposed by traditional educational systems. The theoretical references adopted to draw the didactic situations are explained, these situations include more and more moments of distance learning, synchronous or asynchronous, redefining the attitude of lecturers and students. This work points out the introduction of a tutor, an agent to promote interactions among student/lecturer/object of knowledge; and the investment on production of didactic material specific to digital graphics is emphasized between lecturers and students, exploring collaborative activities to the distance learning modality. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2005_155
id	2005_155
authors	Mullins, Michael, Kirkegaard, Poul Henning, Jessen, Rasmus Zederkof and Klitgaard Jens
year	2005
title	A Topology Optimization Approach to Learning in Architectural Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 155-162
doi	https://doi.org/10.52842/conf.ecaade.2005.155
summary	Topology optimization methods offer an interesting tool for architects and engineers as a rational basis for the choice of a structure’s initial form, particularly as developments in computer software are compatible with this approach. This can be argued from ecology, resource savings, static load design, financial and a number of other pragmatic reasons. But in an artistic/architectural perspective these are not decisive. Analogical design qualities include a tectonic appreciation of the properties of materials, metaphoric interpretation of intention and considerations of context. The paper describes an attempt to unify analytic and analogical approaches in an architectural education setting, using topology optimization software. It uses as examples recent student projects where the architectural design process based on a topology optimization approach has been investigated. The paper describes and presents results obtained by the students during the project. Further, a discussion is delivered concerning the improved understanding of tectonic design obtained by the student during the projects.
keywords	Architectural Education, Topology Optimization, Tectonic Design
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2005_b_6c_e
id	caadria2005_b_6c_e
authors	Julio Bermudez, Albert C. Smith, Seth Striefel
year	2005
title	Visualizing the Invisible: Digital Studies on Representing Non-Visual Architectural Experiences
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 510-515
doi	https://doi.org/10.52842/conf.caadria.2005.510
summary	During the last several years our architecture school has gone through the process of fully digitizing the studios. We, as faculty are learning much about the advantages and difficulties of teaching architectural design in this new electronic environment. This knowledge has been included in our development of a beginning design communications course that offers an important improvement in regards to our changing teaching situation. This short paper presents one project from this course that introduces our students to the use of digital media for dealing with non-visual and subjective content —something quite contrary to what is usually associated with the teaching of digital graphics. We believe that this project breaks new ground for teaching and investigating the nature of computer graphics and through it into the very essence of our experience and understanding of architecture.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	cf2005_2_41_104
id	cf2005_2_41_104
authors	SEICHTER Hartmut
year	2005
title	Assessing Virtual Tangibility
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 151-160
summary	Design technology simulates a variety of senses but on the other hand restricts them to audio and visual responses. What happens if technology can accommodate more senses in the creation process and how does it affect the way we approach design? This paper investigates the implication of tangible interfaces in design computing. The focal point is to assess the factors of perception and cooperative working by employing an Augmented Reality (AR) setup with tangible interfaces in a design studio. A concept of usability evaluation is discussed with the focus on core theories and resulting methodology.
keywords	augmented reality, urban design, usability evaluation, tangible interface, CSCW
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	2005_311
id	2005_311
authors	Özkar, Mine
year	2005
title	Lesson 1 in Design Computing Does not Have to be with Computers
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 311-318
doi	https://doi.org/10.52842/conf.ecaade.2005.311
summary	This paper proposes basic design instruction as a possible setting for introducing the concept of design computing to architecture students in the first year of their education. The argument is based on two viewpoints. The first extends the positivistic understanding of computation to visual reasoning in general. The second recognizes visual design activity as a reasoning process. The author suggests that, in order for computation to be embedded in the ways of design thinking, an understanding of it needs to be built-in, both as concept and as practice, into learning about the design process. The study draws attention particularly to basic design instruction as a setting for design and computation to be learnt concurrently. Examples from the first year curriculum at Middle East Technical University are given to illustrate the discussion.
keywords	Basic Design; Computation; Design Reasoning; Design Thinking
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2005_a_1a_b
id	caadria2005_a_1a_b
authors	B. Senyapili, I. Basa
year	2005
title	RECONCILING COMPUTER AND HAND: THE CASE OF AUTHOR IDENTITY IN DESIGN PRESENTATIONS
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 13-22
doi	https://doi.org/10.52842/conf.caadria.2005.013
summary	As computers were newly emerging in the field of architectural design, it was claimed that the impact of computers would change the way architects design and present. However, within the course of computer use in design, although the field of architectural practice might have been altered extremely, in architectural education there still seems to be a bond to conventional mind-hand-paper relation. One of the reasons for that bond is the fact that although being r 1000 elated to many technologies, architecture essentially positions itself around an artistic core that is still fed with conventional modes of creation. Architectural education aims at adopting and working on this very core. One of the major contributors in the formation of this core is the presence of author identity. This paper makes a critical approach to computers in terms of expressing author identity in design presentations especially during design education. We believe that the author identity is important in design education in terms of identifying the potential and skills of the student. Especially in design education the final step of design process turns out to be the presentation, unlike architectural practice where the presented design is actually built. Within this conception, two different studies were held in an educational environment with 160 design students and 20 design instructors. The results of both studies pointed at the fact that the digital opportunities that exist for design education should evolve around preserving and underlining the author identity in design presentations.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	2005_131
id	2005_131
authors	Bailey, Rohan
year	2005
title	Digital Tools for Design Learning
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 131-138
doi	https://doi.org/10.52842/conf.ecaade.2005.131
summary	There is growing consensus among architectural critics and educators that there exists an increasing divide between the worlds of architectural education and practice. New social and cultural norms, new materials, and current global concerns, like sustainability, have largely influenced the need for an improved balance/integration between design theory and practice. This places schools of architecture around the world under pressure to provide their graduates with the requisite skills that support responsible design characterized by good design thinking strategies. The Caribbean School of Architecture, in addition to being affected by this predicament, has other pressures on its educational offerings. The region’s lack of resources and particular social issues mandates that graduates of the school adopt a responsible attitude towards design in the region. A positive attitude to such issues as sustainability, energy conservation and community will only come about through an effective transmission of particular architectural knowledge that is relevant to the region. The challenge (globally and in the Caribbean), therefore, is the provision of an innovative and effective way of supporting the student master dialogue in studio, facilitating the transfer of “practical, appropriate knowledge” needed by students to create safe, purposeful and responsible architecture. This paper exists within the research paradigm of providing digital teaching tools to beginning students of architecture. This digital research paradigm seeks to move digital technology (the computer) beyond functioning as an instrumental tool (in visualization, representation and fabrication) to becoming a “Socratic machine” that provides an appropriate environment for design learning. Research funds have been allocated to the author to research and develop the information component of the tool with special reference to the Caribbean. The paper will report on the results of prior investigations, describe the reaction and appreciation of the students and conclude with lessons learnt for the further development of the teaching tool.
keywords	Design Education, Digital Design, Teaching Tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2005_1_62_226
id	cf2005_1_62_226
authors	CHENG, Nancy Yen-wen and MCKELVEY Andrew
year	2005
title	LEARNING DESIGN PROCESS WITH DIGITAL SKETCHING: COPYING GRAPHIC PROCESSES FROM ANIMATIONS AND STORYBOARDS
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 291-300
summary	This paper examines the effectiveness of animated versus non-animated drawings as teaching tools. Data was collected by comparing how architectural design students given an animation versus those given a static, six-panel storyboard are able to learn processes in a space-planning design problem. All subjects were given an example of an expert design drawing, asked to put the design steps in order, and then to follow those steps in performing a similar design problem. Their responses were recorded with a digital pen-on-paper system that automatically generates vector animations. The animations can then be immediately viewed on a computer for stroke-by-stroke review. Finally, each student’s animation was analysed in terms of design process steps and compared with the expert example. While those given animations performed only marginally better on the survey of steps, they were better able to imitate the order of expert steps. Furthermore, reviewing the examples by computer revealed common errors that students could modify for more successful design strategies. The following discussion examines methods for researching design process with the digital pen, along with shortcomings, advantages and directions for further study.
keywords	teaching, with technology, sketching, design teaching, digital pPen-based computing
series	CAAD Futures
type	normal paper
email
last changed	2007/10/22 06:58

_id	caadria2005_b_3c_a
id	caadria2005_b_3c_a
authors	Christopher Lowry
year	2005
title	Making Understanding: Research in the application of virtual environments in the teaching of architectural design and technology
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 93-101
doi	https://doi.org/10.52842/conf.caadria.2005.093
summary	This paper describes how the application of interactive three dimensional computer modelling enables students of architecture to gain a comprehensive insight into how buildings are made. An intimate exploration of what can be, in the student’s perception, a lacklustre subject area is revitalized through the use of virtual building models and introduces the student to the potentials of this medium in communicating their own design work. In addition the published case studies are navigated as one would a web site which is a familiar and comfortable format for the student. Original working drawings and specification provided by architects are utilised in generating detailed three dimensional virtual models of the complete building along with larger scale detail studies of particular building components. The models are then animated or transferred to VRML format for publication within interactive case studies. The case studies may be accessed via the department server for use by staff during lectures and seminars or informally by the individual student.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2005_b_3c_c
id	caadria2005_b_3c_c
authors	Jawaid Haider, Theodor Wyeld, Peter Scriver
year	2005
title	On the Pedagogical Benefits of Incorporating Digital Media in the Teaching of Architectural History and Theory
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 109-115
doi	https://doi.org/10.52842/conf.caadria.2005.109
summary	This paper reports on the use of physical and digital media in a history and theories of twentieth century architecture and landscape course. An electronic bulletin board (ebb) was used to generate an open forum for critical dialogue on textual, physical, and digital media. It gave teachers and students the ability to observe the course in new ways. Student interactions with the ebb transformed a culture of hidden collaboration to an open exchange of ideas and concepts. Of particular interest here is the use of 3-D digital composing tools (VRML) that provided a simple, but powerful way to visualize ideas which physical representation often could not. This approach instilled a philosophy of linking design and theory, where history and theory are seen as a body of knowledge consciously brought to bear on design practice.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2005_714
id	sigradi2005_714
authors	Klinger, Kevin R.
year	2005
title	Augmented Vision: Digital Devices and Post-processing for Experiential Learning
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 714-719
summary	Today, digital devices and post-processing provide for rich mediated observations of places. When we observe the natural world through a digital lens, it alters perception and augments our understanding. Digital devices affect the observing reality through a bias of digital laws, thus participating by revealing layers of information concealed within the captured scene. This paper outlines strategies for digitally augmenting our innate powers of observation and facilitating critical experiential learning through digital visual notation. Digitally augmented observation techniques were tested during student and professor related travel/study with Ball State University. Examples of time-based motion capture such as serial digital photography, post processed image manipulation, and digital video/still collage with multimedia narrative will be used to illustrate how digitally enhanced augmented vision techniques render observation of the everyday world in new terms. Additionally, the paper points to a trajectory for future digital notes scholarship by examining the potential for innovative new pedagogies, and situating the discourse in relation to an existing body of scholarship on traditional visual notes.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	sigradi2005_203
id	sigradi2005_203
authors	Pratschke, Anja
year	2005
title	Abrigo Mínimo: architecture as process
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 203-208
summary	Information and communication technologies bring together methods of organizing complex activities while questioning traditional ways of working, inviting to use complex approaches when it comes to design process, based on the fact that the media has the potential to alter the perceptions of whole factors involved. It enables the creation of networks, the rethinking of working methods, allowing an even more effective interaction between different actors and their activities. The starting point for the experimental exercise “Abrigo Mínimo” was to discuss a different approach of understanding the way architectural student design by including questions of context. It is proposed that, to understand the design process complexity, they should have a vision of site, subjects and design interrelations as processes rather than products and a conception of it as fields of relations rather than as arrangements of objects. This posture would change radically the students’ way of designing, providing a kind of orientation to act. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	sigradi2005_743
id	sigradi2005_743
authors	Albornoz Delgado, Humberto Ángel; Leticia Gallegos Cazares
year	2005
title	Science teaching with technology (ECIT)
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 743-748
summary	There is an evident need to improve the teaching of sciences. Therefore the ECIT Web page has been designed to assist the teaching of physics, chemistry and biology to secondary students. Considering technology as a mean and not as an end for teaching, the “ECIT Model” was developed following pedagogic as well as design criteria. Its’ implementation requires a specific classroom outline, the use of certain technological tools and an efficient interface, to achieve a working environment (not only digital) of action and learning. The application has been successful and progress has been remarkable in students´ conceptual development in all the subjects. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20053104
id	ijac20053104
authors	Fischer, Thomas
year	2005
title	Teaching Programming for and with Microcontroller-Enhanced Physical Models
source	International Journal of Architectural Computing vol. 3 - no. 1, 57-74
summary	As processes of use, interaction and transformation take center stage in various fields of design, electronic sensors, controllers, displays and actuators can significantly enhance the value of physical models. These technologies allow the development of novel computer interfaces for new kinds of interaction with virtual models, and in the future they can be expected to play an important role in the development of new types of active building components and materials for automated construction and dynamic runtime adaptations of inhabitable environments. However, embedding programmed logic into physical objects involves skills outside the traditional domains of expertise of designers and model makers and confronts them with a steep learning curve. The wide variety of alternative technologies and development tools available in this area has a particularly disorienting effect on novices. However, some early experiences suggest that mastery of this learning curve is easily within reach, given some basic introduction, guidance and support. To assist design students in acquiring a basic level of programming knowledge, better educational programming tools are still required. It is the intent of this paper to provide designers and educators with a starting point for explorations into this area as well as to report on the development of an educational approach to electronics programming called haptic programming.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	sigradi2205_725
id	sigradi2205_725
authors	Haque, Mohammed E.
year	2005
title	DESKTOP VIRTUAL ENVIRONMENTS IN CONSTRUCTION EDUCATION
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 725-730
summary	In construction science, classroom oriented education remains the preferred mode of teaching. Alternative methods such as field trips, use of 3D drawings, and physical models often supplement and enhance the understanding of students. In addition to the risks involved with field trips, designated sites may not be at the particular stage of construction during the academic semester, or the construction sequence may not be fast enough to demonstrate the multiple facets during field visits. Considerable pedagogical advantages can be achieved by the integration of IT and visualization tools in teaching construction engineering/technology. The objective of this research was to develop a desktop virtual environment using 3D, animations, virtual reality and walkthrough of construction processes of steel, concrete, and lightwood structures. These visualization techniques can be valuable aids not only in teaching in the classroom but also an effective self-directed tool for open learning via the web.
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:53

For more results click below: