Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 556

Reformat results as: short short into frame detailed detailed into frame

_id	cf2005_2_63_81
id	cf2005_2_63_81
authors	McMEEL Dermott, COYNE Richard and LEE John
year	2005
title	Talking Dirty: Formal and Informal Communication in Construction Projects
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 265-274
summary	We analyse the emergence and use of formal and informal communication tools in group working to aid in understanding the complexity of construction projects. Our test case is the design and build of an interactive digital installation in an exhibition space, involving students. After the project we conducted focus group studies to elicit insights into the effective use of the digital communications available for the project. We recount key insights from the study and examine how digital messaging devices are contributing to or hindering creative discussion. Whereas the construction process is concerned with the removal of dirt and re-ordering, in this paper we reflect on construction’s ritualistic, contractual and unauthorized aspects, and dirt’s role within them. We draw on Bakhtin’s theories of the carnival in exploring ritual, and the mixing of the un-sanctioned (rumour) with the official (contractual). How does dirt impinge on issues of communication, open discussion, and the move towards “partnering” in construction practice? We conjecture that while physical dirt might be unpleasant, the removal of other forms of metaphorical dirt hampers construction as an efficient and creative process.
keywords	communications, technology, construction
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2005_778
id	sigradi2005_778
authors	Chiarella, Mauro
year	2005
title	DATABASE 3D. Of the new form to the data processing
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 778-782
summary	The search by new architectural forms with digital media loses interest when its results become foreseeable and repetitive in the growth of the large cities. At present, the interest is greater by the processing and manipulation of digital databases as alternatives of the architectural project. The resultant architectures possess forms that contrast less but with greater diversity in their spatial relations. DATABASE 3D is presented like a formal proposal risked of investigation. The experiences of project explore the concepts of Collective Autor, digital database and Hipertexto. It accepts the construction of a diverse and complex reality conformed by fragmentary spatial systems from the adoption of the mosaic, collage, remix and the digital sampling. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2005_b_5c_g
id	caadria2005_b_5c_g
authors	Hue-Ku Shih
year	2005
title	Social Events Awareness System in Design Environment: An Interactive Public Information Services Provider
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 404-410
doi	https://doi.org/10.52842/conf.caadria.2005.404
summary	This paper is an application of its main project, “Interactive Public Information Services Provider in Design Environment”. The project is based on the ID sensing technology and network services to support the social events, formal/informal communication and data communication…etc. In the paper we emphasize on how we can support social events in pervasive computing method. An architect indicates that informal communication is the key of creative ideas in design environment. (Henn, 2002) Here we describe how the concept of the main project can support the awareness of social events in design environment. We introduce the awareness system into three parts: 1. Scenarios 2. Parts in the framework 3. The design issues in the system.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2005_b_4c_e
id	caadria2005_b_4c_e
authors	J. Jinu Louishidha Kitchley, A. Srivathsan
year	2005
title	Combining Shape Grammar and Genetic Algorithm for Developing A Housing Layout: Capturing the Complexity of an Organic Fishing Settlement
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 259-265
doi	https://doi.org/10.52842/conf.caadria.2005.259
summary	Many settlements like the fishermen’s habitat have organically developed and embody the complex relation between land characteristics, functional activities and social aspirations. However, the recent rehabilitation and planning projects, constrained by technical and inscriptional rigidities, have become relatively fixed, formal and monotonous. This research attempts to harness and integrate some of the qualities of organic design process into computer aided design. The two complementary fields of Shape Grammar and Genetic algorithm have been converged for this purpose.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2005_793
id	sigradi2005_793
authors	Kapp, Silke; Ana Paula Baltazar dos Santos
year	2005
title	Digital interface for autonomous production of dwellings
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 793-798
summary	This paper describes the theoretical and technological parameters for a digital interface, in development by MOM/LOW (Morar de Outras Maneiras/ Living in Other Ways), intended at the autonomous production of dwelling. It introduces the current formal and informal processes of production of dwelling arguing for the need of an instrument to enable both the distribution of alternative building components and user participation. It discusses the main questions on agency and machine intelligence as to show the need to take human-machine asymmetry into account in interface design. It also points out the main problems regarding the current technology for creating 3D digital interactive interfaces, and indicates one possible way to use the available technology and locate agency in the event. It concludes by showing that interface design can take advantage of human dialogical ability and of the machine’s capacity to offer material for that dialogue, without humanising the machine or preconditioning human responses. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	cf2005_1_13_236
id	cf2005_1_13_236
authors	MITCHELL William J.
year	2005
title	Constructing Complexity
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 41-50
summary	Buildings were once materialized drawings, but now, increasingly, they are materialized digital information - designed and documented on computer-aided design systems, fabricated with digitally controlled machinery, and assembled on site with the assistance of digital positioning and placement equipment. Within the framework of digitally mediated design and construction we can precisely quantify the design content and the construction content of a project, and go on to define complexity as the ratio of added design content to added construction content. This paper develops the definitions of design content, construction content, and complexity, and explores the formal, functional, and economic consequences of varying the levels of complexity of projects. It argues that the emerging architecture of the digital era is characterized by high levels of complexity, and that this enables more sensitive and inflected response to the exigencies of site, program, and expressive intention than was generally possible within the framework of industrial modernism.
keywords	assembly, complexity, construction, design, fabrication, uniformity, variety
series	CAAD Futures
last changed	2006/11/07 07:27

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2005_139
id	2005_139
authors	Ham, Jeremy J.
year	2005
title	Music and Architecture: from Digital Composition to Physical Artifact
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 139-146
doi	https://doi.org/10.52842/conf.ecaade.2005.139
summary	This paper addresses how relationships between music and architecture can be explored within the design studio through a series of digital games and projects and culminating in the actual construction of small-scale architecture. Through the examination of music and architecture, students are provided with valuable opportunities for authentic learning opportunities relating to digital mastery, teamwork, tectonics, the role of digital technologies in the design and construction process and the translation of an architectural concept relating to composition to a physical artifact.
keywords	Music, Architecture, Real-Scale Modeling, the Design Studio
series	eCAADe
email
last changed	2022/06/07 07:50

_id	da71
id	da71
authors	Horne, Margaret
year	2004
title	Visualisation of Martyr’s Square, Beirut
source	CONVR2005 5th Conference of Construction Applications of Virtual Reality, ADETTI/ISCTE, Durham, UK, 12-13 September 2005
summary	Solidere, a Lebanese joint-stock company, was created by government decree in 1994 to reconstruct Beirut city-centre. The company, a form of public-private partnership, has a majority share holding of former owners and tenants of city-centre property. Several projects are underway, including the redevelopment of Place des Martyrs, once the bustling heart of Beirut but badly damaged during the war. Urban planners in Beirut have recently developed a 3D computer model to visually describe the spatial characteristics of Martyr’s Square and its context, prior to inviting design proposals for an international competition. This paper describes issues pertaining to the development of the model to meet the needs of urban designers and town planners. It also considers potential future uses of the simulation, outlining areas for further research and development.
keywords	Beirut, 3D Modelling, Visual Simulation, Town Planning
series	other
type	normal paper
email
last changed	2006/06/08 22:10

_id	cf2005_1_92_179
id	cf2005_1_92_179
authors	LAEPPLE Eberhard, CLAYTON Mark and JOHNSON Robert
year	2005
title	Case Studies of Web-Based Collaborative Design
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 455-464
summary	Data collected from real-world projects using Web-based communications and project management systems provide quantitative evidence for characterizing the design process. Tens of thousands of records have been analyzed from six cases. The cases are all high-end office and retail building projects, with about 50 members of the design team. The data supports the distinction of multiple stages in the design process as the patterns of usage of the software changes through time. Coordination activities are more frequent in early stages, while collaboration activities are more common in late stages. In planning and design stages, use of the software is focused upon accessing static information, while in construction documentation a relatively greater number of activities include generate and process operations.
keywords	collaboration, communications, design management, design process, software
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	caadria2019_183
id	caadria2019_183
authors	Macken, Marian, Mulla, Sarosh and Paterson, Aaron
year	2019
title	Inhabiting the Drawing - 1:1 in time and space
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 505-514
doi	https://doi.org/10.52842/conf.caadria.2019.1.505
summary	One of the fundamental characteristics of architectural drawing is its use of scale. Since the Renaissance - during which architectural production shifted from the construction site to paper - this scalar understanding began by using bodily measurements. In developing designs, the architect projects future occupation of the drawing with their eyes and hands moving over both its physical surface and represented space. The different relationship established between the digital drawer and the body has been criticised; Paul Emmons argues that CAD's full scale - or rather scale-less - capabilities omit this bodily presence of the drawer (Emmons, 2005). Due to the use of full scale data recording, the drawer zooms in and out to consider aspects, severing the drawing's relation to the operator's body. This paper explores ways in which the body and drawings intersect, beyond Emmons definition, and hence considers the influence of the method of drawing on perceptions of scale and the inhabitation of digital drawings. It uses ongoing collaborative research projects and exhibitions to explore the inhabitation of digital drawing at full scale. These works highlight the fundamental importance of the line within architecture, not as demarcation, divider or indexical reference, but as a traces of bodily projections.
keywords	architectural drawing; architectural scale; full scale drawing; post factum documentation
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	cf2005_2_55_233
id	cf2005_2_55_233
authors	Penttilä, Hannu
year	2005
title	The State of the Art of Finnish Building Product Modelling Methodology
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 225-240
summary	This paper describes and analyses the impacts of the current Finnish building product modelling methodology on the building process and on construction field organizations. The objective is also to recognize and monitor changes in the design and construction environments as well as in the software platforms. In Finland building product modelling has, after 10-15 years of preliminary research, evolved into a piloting phase where the developed modelling methods are currently tested in real-life projects. One quite possible - and even more desired - future scenario is that building product modelling will become an essential collaborative working platform for building projects within the next 10 years.
keywords	building product modelling, building information modelling, construction IT
series	CAAD Futures
type	normal paper
email
last changed	2009/06/04 07:02

_id	cf2011_p115
id	cf2011_p115
authors	Pohl, Ingrid; Hirschberg Urs
year	2011
title	Sensitive Voxel - A reactive tangible surface
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 525-538.
summary	Haptic and tactile sensations, the active or passive exploration of our built surroundings through our sense of touch, give us a direct feeling and detailed information of space, a sense of architecture (Pallasmaa 2005). This paper presents the prototype of a reactive surface system, which focuses its output on the sense of touch. It explains how touch sensations influence the perception of architecture and discusses potential applications that might arise from such systems in the future. A growing number of projects demonstrate the strong impact of interaction design on the human senses and perception. They offer new ways of sensing and experiencing architectural space. But the majority of these interaction concepts focus on visual and auditory output-effects. The sense of touch is typically used as an input generator, but neglected as as a potential receiver of stimuli. With all the possibilities of sensors and micro-devices available nowadays, there is no longer a technical reason for this. It is possible to explore a much wider range of sense responding projects, to broaden the horizon of sensitive interaction concepts (Bullivant 2006). What if the surfaces of our surroundings can actively change the way it feels to touch them? What if things like walls and furniture get the ability to interactively respond to our touch? What new dimensions of communication and esthetic experience will open up when we conceive of tangibility in this bi-directional way? This paper presents a prototype system aimed at exploring these very questions. The prototype consists of a grid of tangible embedded cells, each one combining three kinds of actuators to produce divergent touch stimuli. All cells can be individually controlled from an interactive computer program. By providing a layering of different combinations and impulse intensities, the grid structure enables altering patterns of actuation. Thus it can be employed to explore a sort of individual touch aesthetic, for which - in order to differentiate it from established types of aesthetic experiences - we have created the term 'Euhaptics' (from the Greek ŒµœÖ = good and Œ¨œÄœÑœâ = touch, finger). The possibility to mix a wide range of actuators leads to blending options of touch stimuli. The sense of touch has an expanded perception- spectrum, which can be exploited by this technically embedded superposition. The juxtaposed arrangement of identical multilayered cell-units offers blending and pattern effects of different touch-stimuli. It reveals an augmented form of interaction with surfaces and interactive material structures. The combination of impulses does not need to be fixed a priori; it can be adjusted during the process of use. Thus the sensation of touch can be made personally unique in its qualities. The application on architectural shapes and surfaces allows the user to feel the sensations in a holistic manner ‚Äì potentially on the entire body. Hence the various dimensions of touch phenomena on the skin can be explored through empirical investigations by the prototype construction. The prototype system presented in the paper is limited in size and resolution, but its functionality suggests various directions of further development. In architectural applications, this new form of overlay may lead to create augmented environments that let inhabitants experience multimodal touch sensations. By interactively controlling the sensual patterns, such environments could get a unique ‚Äútouch‚Äù for every person that inhabit them. But there may be further applications that go beyond the interactive configuration of comfort, possibly opening up new forms of communication for handicapped people or applications in medical and therapeutic fields (Grunwald 2001). The well-known influence of touch- sensations on human psychological processes and moreover their bodily implications suggest that there is a wide scope of beneficial utilisations yet to be investigated.
keywords	Sensitive Voxel- A reactive tangible surface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	791f
id	791f
authors	Stellingwerff, M. C.
year	2005
title	VIRTUAL CONTEXT - INVESTIGATING THE CHARACTERISTICS AND OPPORTUNITIES OF DIGITAL VISUALISATION MEDIA FOR SITUATED APPROACHES TO ARCHITECTURAL DESIGN IN AN URBAN ENVIRONMENT
source	Delft University Press
summary	This research initiative addresses the issue of Design in relation to Virtual Context. Central to this study are the innovative potentials and instrumental opportunities of computer based media techniques, capable of generating interactive models and changing perspectives for the benefit of urban and architectural design. The ambition was to not only make a contribution to the existing body of knowledge concerning digital technologies and their applications, but explore theoretical conditions which might help define and stimulate further study. From the outset, the focus was on furthering the opportunities for computer based representation media in creative design. On the basis of a series of explorative studies the subject of this research was targeted: the issue of Design in Context, or more specifically: Design(ing) in a Virtual Context. During the process there was a marked shift in the conception of the subject from – more or less immersive – VR technologies in the direction of approaches which might be expected to become readily available in practice and education and could be effective in actual design processes. This insight also brought about a shift in emphasis from realism per-se towards creating a sense of situatedness. The design representation system which was developed was intended to not just allow for one type of model view, but to afford an array of different views, from which the designer would be able to choose freely, depending on the phase and focus of design as well as personal preferences. A series of interface prototypes and support tools were developed especially and successively tested experimentally. For the intended final design driven experimental study, different virtual context models were considered. Eventually, an integral – purely fictitious – design ‘environment’ was constructed in the computer, so that the workings of the proposed system and its components would be tested systematically. A conscious choice was made for an in depth study, on a relatively modest scale, which would a certain amount of mutual involvement between designer and researcher, to confront the participants with the finer aspects of the proposed system in a relatively short time and to gather detailed data. A half dozen design professionals were invited to participate in a closely monitored experimental exercise. The results of this study therefore do not offer straightforward, indisputable facts, to be considered representative for the design community as a whole, but indicate that the working methods of the individual designers – when discovering aspects of the site, developing and presenting proposals and reflecting on the qualities of represented designs – tend to vary considerably. For this reason the interactive representation system proved to be of value. Participants could express different view preferences, with more or less realistic image modes being used in different phases of their design developments, with varying experiences of situatedness. Some of the design professionals participants were very appreciative of the system’s opportunities, others tended to be more ‘set in their ways’. The results of this experimental study indicate that there may particularly be opportunities for interface applications which are able to function interactively, offering individual designers – as well as others involved in evaluating design proposals – a variety of tools with which to approach specific design artefacts in their changing contexts. Virtual models can play not only an important role as a ‘reminder’ for the designer but also to other parties playing an active role in the design and implementation processes. Interactive environment models are not only promising as exploration tools for existing sites, but could be valuable to test the impact of a design on its location. This could be especially interesting if the site is difficult or impossible to visit or as yet a virtual construction. In addition such an approach might be beneficial for objective comparison and evaluation of design proposals in competitions and in education as well as in on-line collaborative design projects where the context is still in the process of being developed.
series	thesis:PhD
type	normal paper
email
more	http://www.bk.tudelft.nl/users/stelling/internet/
last changed	2005/03/02 22:40

_id	2005_751
id	2005_751
authors	Szalapaj, Peter
year	2005
title	The Digital Design Process in Contemporary Architectural Practice
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 751-759
doi	https://doi.org/10.52842/conf.ecaade.2005.751
summary	There is an increasing trend in contemporary architectural projects towards dependence upon digital processes for their organisation and technical evaluation of a range of design criteria. Digital representations are central not only to form generation and structural analysis, but also to the integration of fabrication and construction directly with the earlier design stages. It is important to bear in mind, however, that digital technology is only a means to an end which is the design process itself. Each technique of digital representation and analysis brings advantages and disadvantages to this process, and should therefore be described in these terms. It is becoming increasingly feasible to develop a rapid succession of distinct digital models, both geometric and dynamic, in early design stages. These can be tested and evaluated with respect to a range of analytical criteria, and the results of these analyses can affect further model development thus forming a cyclical process of 3-D digital model generation.
keywords	Dynamic Modelling, Geometric Modelling, Surface Modelling, Parametric Representation, Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2005_655
id	sigradi2005_655
authors	Tramontano, Marcelo; Carlos Augusto Joly Requena
year	2005
title	HABITARES: design processes of hybrid spaces
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 655-658
summary	This paper presents some results of an ongoing research work which aims at analyzing a set of architectural selected projects, categorizing the design process of their authors. Some main concepts are described and discussed, in order to sketch some preliminary conclusions the role of the architect in the construction of so-called hybrid spaces. This study is undergoing within the Nomads.usp Centre for Housing and Ways of Living Studies, of the University of Sao Paulo, Brazil (www.eesc.usp.br/nomads) [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	acadia20_114p
id	acadia20_114p
authors	Zivkovic, Sasa; Havener, Brian; Battaglia, Christopher
year	2020
title	Log Knot
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 114-119.
summary	Log Knot, developed by the Robotic Construction Laboratory (RCL) at Cornell University, is a robotically fabricated architectural installation that establishes a method for variable compound timber curvature creation utilizing both regular and irregular roundwood geometries. Moreover, the project develops methods for minimal formwork assembly and moment force optimization of customized mortise and tenon joints. Following the logic of a figure-8 knot, the project consists of an infinite loop of roundwood, curving three-dimensionally along its length. There are a variety of techniques to generate single curvature in wood structures – such as steam bending (Wright et al., 2013) or glue lamination (Issa and Kmeid, 2005) – but only a few techniques to generate complex curvature from raw material within a single wooden structural element exist. To construct complex curvature, the research team developed a simple method that can easily be replicated. First, the log is compartmentalized, establishing a series of discrete parts. Second, the parts are reconfigured into a complex curvature “whole” by carefully manipulating the assembly angles and joints between the logs. Timber components reconfigured in such a manner can either follow planar curvature profiles or spatial compound curvature profiles. Based on knowledge gained from the initial joinery tests, the research team developed a custom tri-fold mortise and tenon joint, which is self-supportive during assembly and able to resist bending in multiple directions. Using the tri-fold mortise and tenon joint, a number of full-scale prototypes were created to test the structural capacity of the overall assembly. Various structural optimization protocols are deployed in the Log Knot project. While the global knot form is derived from spatial considerations – albeit within the structurally sound framework of a closed-loop knot structure – the project is structurally optimized at a local level, closely calibrating structural cross-sections, joinery details, and joint rotation in relation to prevailing load conditions.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	2005_010
id	2005_010
authors	Aish, Robert
year	2005
title	From Intuition to Precision
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 10-14
doi	https://doi.org/10.52842/conf.ecaade.2005.010
summary	Design has been described as making inspire decisions with incomplete information. True, we may use prior knowledge, we may even think we understand the causalites involved, but what really matters is exploration: of new forms, of new materials, and speculation about the response to the resulting effects. Essentially, this exploration has its own dynamics, involving intuition and spontaneity, and without which there is no design. But of course we all know that this is not the whole story. Design is different to 'craft'; to directly 'making' or 'doing'. It necessarily has to be predictive in order to anticipate what the consequence of the 'making' or 'doing' will be. Therefore we inevitably have to counter balance our intuition with a well developed sense of premeditation. We have to be able to reason about future events, about the consequence of something that has not yet being made. There is always going to be an advantage if this reasoning can be achieved with a degree of precision. So how can we progress from intuition to precision? What abstractions can we use to represent, externalize and test the concepts involved? How can we augment the cognitive processes? How can we record the progression of ideas? And, how do we know when we have arrived? Design has a symbiotic relationship with geometry. There are many design issues that are independent of any specific configurations. We might call these “pre-geometric” issues. And having arrived at a particular configuration, there may be many material interpretations of the same geometry. We might call these “post-geometric” issues. But geometry is central to design, and without appropriate geometric understanding, the resulting design will be limited. Geometry has two distinct components, one is a formal descriptive system and the other is a process of subjective evaluation.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2005_491
id	2005_491
authors	Beirão, José and Duarte, José
year	2005
title	Urban Grammars: Towards Flexible Urban Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 491-500
doi	https://doi.org/10.52842/conf.ecaade.2005.491
summary	Traditional urban plans have definitive design systems, without the flexibility required to deal with the complexity and change that characterise contemporary urban societies. To provide urban plans with increased flexibility, it is proposed a design methodology capable of producing various design solutions instead of a specific definitive design. The methodology uses shape grammars as a process for generating urban design. In this approach, design becomes a system of solutions rather than a specific one. Through the analyses of a group of urban plans, a design methodology was sketched in which rules are used to enable more flexibility. These plans where chosen for their perceived qualities in terms of language, planning efficiency, and latent flexibility. As a result, a four-phased methodology was identified and thus, proposed for designing urban plans. This methodology was then combined with shape grammars and tested in a design studio setting. Students were asked to use the methodology and shape grammars as auxiliary instruments in the design of a flexible plan for a new town. In the following year, to simulate real-world conditions and oblige students to consider urban ordering and scale, work was structured differently. First, students were asked to develop a rule-based urban plan as in the previous year. Second, they were asked to conceive a detail plan for a sector of an urban plan defined by another group of students following its rules. The plans were then analysed with the goal of refining the methodology. Results show that shape grammars produce urban plans with non-definitive formal solutions, while keeping a consistent spatial language. They also provide plans with explicit and implicit flexibility, thereby giving future designers a wider degree of freedom. Finally, they provide students with a concrete methodology for approaching urban design and foster the development of additional designing skills.
keywords	Shape Grammars, Flexible Urban Design
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: