Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 554

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2005_558
id	sigradi2005_558
authors	Carlos, Juliano; Cecílio Batista Oliveira
year	2005
title	Dismissible packings of this atomic and electronic age
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 558-563
summary	Discuss concepts of urban nomadic and the revision of the contemporary habitation, from the reading of recent architectural proposals. It presents alterations of the international architecture after years 60, as the introduction of new medias in the domestic space and the life in society – the television, the radio, the communications for satellite and the computer – and boom technological with the production of new materials for the civil construction – the mega-structures in steel, new types of plastic, etc… - and the consequent unfoldings in the contemporary architecture. Analyze two works of the English group Archigram, (middle of 60), relating them with the production of three European offices in activity today. It concludes pointing future trends in the conception and production of the habitation, as the real necessity of its plastic, programmatical and technician-constructive rediscussion, searching to take care of the real necessities of its user, through special flexibility and plurifuntionality, beyond the incorporation of new technologies. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	2005_383
id	2005_383
authors	Ebert, Oliver, Schoenemann, Patrick and Lenhart, Michael
year	2005
title	Cityscape Computing System
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 383-389
doi	https://doi.org/10.52842/conf.ecaade.2005.383
summary	The central feature of the project is the development of a computer and its interfaces to simulate urban space and, in the context of an intermedia city tour, to allow citizens to creatively influence their urban space by manipulating media structures at chosen points throughout the city. A master plan is set up to re-cultivate public spaces and points of architectural focus. The city reacts interactively to the commands. A dialog is created between user and public space. The tour route is an open structure which can be expanded at any time. Via interfaces the user activates a reaction in the real city by making changes to the virtual model. This results in a dynamic space, a communication based on the results of this transformation. The user interface allows an information transfer between real people and virtual space. Virtual reality then reacts to the input by transferring that information back to reality. The direct influence on the architecture is effected by a media-transformer. It projects an additional perception level on to reality while monitoring the data via various analysis interfaces.
keywords	Interactive Urbanism; Media Installation; Human-Computer-Interaction
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2005_399
id	2005_399
authors	Johansson, Mikael and Roupé, Mattias
year	2005
title	From CAD to VR – Implementations for Urban Planning and Building Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 399-405
doi	https://doi.org/10.52842/conf.ecaade.2005.399
summary	At present time, three-dimensional objects are often represented with 2D-data in urban planning and building design. In order to get all the involved parties to fully understand a certain project, this may not be enough. More and more projects therefore take use of the Virtual Reality (VR) technique as a complement to traditional 2D drawings and sketches. All the involved parties can then share a common frame of reference for all discussions regarding a certain project. Unfortunately, the technique is not yet adapted to fit the current building design process. In this paper, we present a solution for semi-automatic generation of a VR-model based on 3D CAD information and aerial photos obtained from the City Planning Authorities in Sweden. The data is imported to support real-time editing of terrain, roads and buildings. We also present a framework for importing 3D-models created in Autodesk Revit which enables a seamless integration of modern 3D CAD and VR-models. The features are implemented in a software developed at Chalmers Visualization studio (Gothenburg, Sweden) and technical details about terrain handling and speed-up techniques will be given.
keywords	Virtual Reality; 3D City modeling; Urban planning; Terrain; Visualization
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia06_510
id	acadia06_510
authors	Johnson, Jason
year	2006
title	Complexity as a Creative Force in Design Variegation, Heterogeneity, Diversity
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 510-517
doi	https://doi.org/10.52842/conf.acadia.2006.510
summary	This paper describes an experimental project that attempts to use complexity as a creative and vital force within the design process. The project seeks to release architecture from its conventional role as a static urban backdrop and to transform it into a vital, dynamic, and active participant within cities. The project, entitled “Energy Farm”, was instigated by the 2005 International Open Design Competition for a “Performing Arts Island” located within the Han River in Seoul, Korea. Through the exploration of the site and program elements as an interacting matrix of fields, forces, and flows (energy, program, water flow, infrastructure, etc.), our proposal emerged as a variegated landscape marked by its capacities to produce its own energy, interweave heterogeneous threads of structure and program, and instigate a diverse set of scenarios in which physical and virtual realms coalesce. Architecture, in its unique capacity to bridge these realms, can release the rich computation potential of complexity into the physical realm. Within this scenario, architecture becomes a creative and vital agent for productive change with profound social, political, and ecological implications.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	2005_415
id	2005_415
authors	Tramontano, Marcelo and Mônaco dos Santos, Denise
year	2005
title	Online_communities
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 415-423
doi	https://doi.org/10.52842/conf.ecaade.2005.415
summary	Research on contemporary habitation spaces is directly related to the study of the relationship between new media and everyday life. This paper presents ongoing in-depth research which intends to discuss these relationships in different ways on a conceptual basis. A collaborative multi-users interface is being specially designed, supported by different kinds of electronic equipment. Furthermore, the project’s objective is to analyze how these information and communication technologies are to be used, as well as their impact on poor communities. As a hypothesis, our intention is to verify if the access to information will be able to broaden social interactions and improve new services which have been set up, in order to guarantee a better quality of life. Beyond being a conceptual approach, the study intends to present and examine facts obtained from intervening in a poor district in São Paulo city, Brazil. Using an existing public telecenter as an access provider to the internet, individual TV-connected set-top boxes in 220 apartments in a local social housing complex are being installed, enabling users to communicate through a collaborative multiusers digital interface. Adding a virtual instance to a geographically-based community, the aim of the project is to provide new possibilities to improve dialogue and debates, to encourage more income and cultural activities. It also intends to evaluate the effects of the technological mediation of social relationships, both inside and outside the community, as well as within the physical urban space such as in the dwellings. The results of this study will be useful in defining public policies to be implemented by the Sao Paulo Local Government. The work is being sponsored by FAPESP, which is the Sao Paulo State Funding Agencie, but also by public institutions, private partners and universities. Researchers involved belong to complementary fields such as architecture, urbanism, computer sciences, social sciences, psychology and electronic engineering.
keywords	Virtual Communities, Collaborative Networks, Digital Inclusion
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2005_a_7c_a
id	caadria2005_a_7c_a
authors	Anandan Karunakaran
year	2005
title	Organisation of Pedestrian Movements: an Agent-Based Approach
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 305-313
doi	https://doi.org/10.52842/conf.caadria.2005.305
summary	Cities are becoming more complex in this digital era due to technological changes. Thinking of cities without such technological changes is equivalent to an embryonic state in the morphology of city growth, that is, the growth seems less advanced. So it is appropriate to think of the non digital city digitally. Urban design is one state which establishes the perfect relationship between the street, people and building. The relationship of the people with the building and street is becoming one of the key factors in architecture. It has been observed that the design of a city has been influenced by the pedestrian movement. Many cities prior to the industrial era were largely determined by the social interactions based on walking. Thus the pedestrians play a key role in the formation of the city. They are a very important component in any representation of transport movements. They generally terminate or initiate a chain of linked activities, and if observed carefully, a single pedestrian movement is meant to include various sub journeys from one location to another. In order to organize pedestrians, we need to understand the pedestrian movement system. Though there is a lot of development of urban models in this aspect, it is still in a nascent state in comparison with the digital advancement. Thus much research work is carried out which can be applied to any given environmental setting, and as a result urban designers can respond to the changing socio-cultural technologies.
series	CAADRIA
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2005_603
id	sigradi2005_603
authors	Castañé, Dora; Claudio Deho, Adrián Barcesat, Carlos Tessier
year	2005
title	Urbamedia: the design of an integrated system of urban-building visualization and communication
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 603-608
summary	This paper presents the advancements of the Urbamedia project which was designed as part of a research program at the Center CAO (Creation computer assist), School of Architectural Design and Urbanism, University of Buenos Aires, which was led by the valued master and advisory professor Architect Arturo F. Montagu. This proposal of the city of Buenos Aires on the Mayo Avenue expands the original historical fragment presented between the following two referenced representative landmarks: The Two Congresses Square and the Mayo Square. It continues with the advancement of methodologies and techniques implemented in a system of “integrated visualization and communication” for the development of a VRML (Virtual Reality Modeling Language) 3D virtual non-immersive and interactive vision. It also incorporates the development of a “foundation of digitally integrated knowledge” with fragments of central areas from other surrounding cities as well as interfaced phenomenological situations. The application of digital VRML technology has allowed for thoroughly researching the processes through dynamic simulation of specific urban fragments (Mayo Avenue within Buenos Aires) and the cities that are also participating in the project. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaaderis2018_103
id	ecaaderis2018_103
authors	Davidová, Marie and Prokop, Šimon
year	2018
title	TreeHugger - The Eco-Systemic Prototypical Urban Intervention
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 75-84
keywords	The paper discusses co-design, development, production, application of TreeHugger (see Figure 1). The co-design among community and trans-disciplinary participants with different expertise required scope of media mix, switching between analogue, digital and back again. This involves different degrees of physical and digital 'GIGA-Mapping' (Sevaldson, 2011, 2015), 'Grasshopper3d' (Davidson, 2017) scripting and mix of digital and analogue fabrication to address the real life world. The critical participation of this 'Time-Based Design' (Sevaldson, 2004, 2005) process is the interaction of the prototype with eco-systemic agency of the adjacent environment - the eco-systemic performance. The TreeHugger is a responsive solid wood insect hotel, generating habitats and edible landscaping (Creasy, 2004) on bio-tope in city centre of Prague. To extend the impact, the code was uploaded for communities to download, local-specifically edit and apply worldwide. Thus, the fusion of discussed processes is multi-scaled and multi-layered, utilised in emerging design field: Systemic Approach to Architectural Performance.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	sigradi2005_700
id	sigradi2005_700
authors	Espina, Jane J. B.
year	2005
title	VISION OR RETROSPECTION INTO THE PAST: SCIENTIFIC VISUALIZATION IN THE RECOVERY OF PATRIMONIAL URBAN SPACES
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 700-706
summary	This paper shows the use of digital means in the presentation and relation between the perception of those who have walked by in the past and circulate at present through the Baralt Square space, at specific historic periods, with the purpose of reconstructing the different urban scenarios, and foresee their future, through the use of scientific visualization. The digital reconstruction of the square, of colonial origin, is a complex process. This multifunctional space represented forms and types of societies, as the various actors participated with perceptions and perspectives which were apart from reality, imposing their vision and interests, defining themselves in the materialization of the space-site. This research originates the urban analysis and the interpretation of the public space with the help of input devices and real-time visualizers. Interaction, virtual surroundings and mixed reality technologies may contribute in designing tools for the recovery of patrimonial surroundings. [Full paper in Spanish]
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:51

_id	cf2005_1_53_133
id	cf2005_1_53_133
authors	HERR Christiane M. and KVAN Thomas
year	2005
title	Using Cellular Automata to Generate High-Density Building Form
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 249-258
summary	This paper presents an investigation into the use of cellular automata systems for the design of high-density architecture for Asian cities. In this architectural context, urban form is shaped by architectural solutions that are developed in a copy-and-paste manner. To this background, cellular automata are introduced and discussed with respect to the specific potential of cellular systems to support architectural design addressing large projects as well as cost and speed constraints. Previous applications of cellular automata to architectural design have been conceptual and are typically limited by the rigidity of classical automata systems as adopted from other fields. This paper examines the generative design potential of cellular automata by applying them to the re-modelling of an existing architectural project. From this application it is concluded that cellular automata systems for architectural design can benefit from challenging and adapting classic cellular automata features, such as uniform volumetric high-resolution models and globally consistent rule execution. A demonstration example is used to illustrate that dynamic, state-dependent geometries can support an architectural design process.
keywords	cellular automata, high density architecture, urban morphology, generative design
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	fbae
id	fbae
authors	Horne, Margaret
year	2005
title	Virtual Beirut
source	CUPUM05 9th International Conference on Computers in Urban Planning and Urban Management, London, 29-30 June 2005
summary	This paper describes how urban planners in Beirut are applying three-dimensional computer modelling to aid design decision making in the regeneration programme for the city. The study reports on the recent developments of a computer model of Beirut and its effectiveness in communicating the spatial characteristics of Martyr’s Square, a place of historic significance in the city. An international urban design competition for Martyr’s Square, and its new axis to the sea, is underway to identify new ideas for the development of this area. This paper reports on the process of creating the computer model and feedback from users. It considers future plans for further 3D modelling of the city centre to meet the needs of urban designers.
keywords	Beirut, 3D Modelling, Urban Planning, Virtual Reality
series	other
type	normal paper
email
more	http://128.40.111.250/cupum/searchPapers/index.asp
last changed	2006/06/08 00:05

_id	caadria2005_a_7c_f
id	caadria2005_a_7c_f
authors	M.N.H. Siddique, Qazi A. Mowla, Mohammad A. Al Masum
year	2005
title	VIRTUALITY IN ARCHITECTURE: A DESIGN METAPHOR
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 342-350
doi	https://doi.org/10.52842/conf.caadria.2005.342
summary	Traditionally, architecture in its design process employs physical matter, requires physical presence and relies on real world environment using conventional methods of 2D depictions such as paper and pen or 3D representations such as physical models and communicates design ideas in verbal or text-based form. The conventional design process, for example an interior design, a residential house, a commercial complex or even urban design projects, follows the same hierarchy of activities. Efforts are made to the satisfaction of both parties to give the ideas of a physical shape through sketches, drafts and models which may take weeks even months. Finally the project gets its final shape in a working drawing, 3D visualisation or model making. This process is time consuming and somewhat redundant. In recent years technology has offered architects a new tool - the virtual environment. Architects use virtual environment increasingly as device of communication and presentation of design intensions. Virtual environment enables users to interact in real-time with design but unfortunately have not been used widely in the process of design development. The aim of this paper is to investigates the relationship between present design process and the emerging technology of virtual reality, establish a relationship between the two and its influence on architecture to form a new translated design process and communication, an interface between architect and client.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	acadia20_38
id	acadia20_38
authors	Mueller, Stephen
year	2020
title	Irradiated Shade
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 38-46.
doi	https://doi.org/10.52842/conf.acadia.2020.1.038
summary	The paper details computational mapping and modeling techniques from an ongoing design research project titled Irradiated Shade, which endeavors to develop and calibrate a computational toolset to uncover, represent, and design for the unseen dangers of ultraviolet radiation, a growing yet underexplored threat to cities, buildings, and the bodies that inhabit them. While increased shade in public spaces has been advocated as a strategy for “mitigation [of] climate change” (Kapelos and Patterson 2014), it is not a panacea to the threat. Even in apparent shade, the body is still exposed to harmful, ambient, or “scattered” UVB radiation. The study region is a binational metroplex, a territory in which significant atmospheric pollution and the effects of climate change (reduced cloud cover and more “still days” of stagnant air) amplify the “scatter” of ultraviolet wavelengths and UV exposure within shade, which exacerbates urban conditions of shade as an “index of inequality” (Bloch 2019) and threatens public health. Exposure to indirect radiation correlates to the amount of sky visible from the position of an observer (Gies and Mackay 2004). The overall size of a shade structure, as well as the design of openings along its sides, can greatly impact the UV protection factor (UPF) (Turnbull and Parisi 2005). Shade, therefore, is more complex than ubiquitous urban and architectural “sun” and “shadow studies” are capable of representing, as such analyses flatten the three-dimensional nature of radiation exposure and are “blind” to the ultraviolet spectrum. “Safe shade” is contingent on the nuances of the surrounding built environment, and designers must be empowered to observe and respond to a wider context than current representational tools allow.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia07_130
id	acadia07_130
authors	Satpathy, Lalatendu; Mathew, Anijo Punnen
year	2007
title	Smart Housing for the Elderly: Understanding Perceptions and Biases of Rural America
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 130-137
doi	https://doi.org/10.52842/conf.acadia.2007.130
summary	It is commonly acknowledged that ‘smart’ environments, interactive architecture and ‘smart’ homes will define the next cutting edge in architectural research. Most critics agree that one of the first problems that ‘smart’ homes will help to address is that of spiraling costs of healthcare and aging-in-place. This may be true for urban settings where there is the financial feasibility for such technologies but what about rural America? It has been conclusively proven that rural America suffers from a lack of healthcare (delivery and access). Prior research (Mathew 2005) has also established that a rural home is different from an urban home. Will technologies designed for the urban home work in a rural setting? And do rural people carry the same attitudes and biases towards technology? This paper continues our research in the design of ‘smart’ rural environments. It summarizes findings from focus group studies conducted in rural communities that help us to understand attitudes of people towards ‘smart’ technology. We will use these findings to examine the feasibility of ubiquitous computing and ‘smart’ spaces in rural areas. In conclusion, we will present guidelines to help designers in the creation of technology to augment healthy aging in rural home settings.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	cf2005_2_41_104
id	cf2005_2_41_104
authors	SEICHTER Hartmut
year	2005
title	Assessing Virtual Tangibility
source	Learning from the Past a Foundation for the Future [Special publication of papers presented at the CAAD futures 2005 conference held at the Vienna University of Technology / ISBN 3-85437-276-0], Vienna (Austria) 20-22 June 2005, pp. 151-160
summary	Design technology simulates a variety of senses but on the other hand restricts them to audio and visual responses. What happens if technology can accommodate more senses in the creation process and how does it affect the way we approach design? This paper investigates the implication of tangible interfaces in design computing. The focal point is to assess the factors of perception and cooperative working by employing an Augmented Reality (AR) setup with tangible interfaces in a design studio. A concept of usability evaluation is discussed with the focus on core theories and resulting methodology.
keywords	augmented reality, urban design, usability evaluation, tangible interface, CSCW
series	CAAD Futures
email
last changed	2005/05/05 07:06

_id	5b89
id	5b89
authors	Sevaldson, Birger
year	2005
title	Developing Digital Design Techniques Investigations on Creative Design Computing
source	Oslo School of Architecture and Design, PHD-Thesis
summary	1.1. The themes in this theses 16 1.1.1. Mind the mind gap 16 1.1.2. Prologue: The World Center for Human Concerns 17 1.1.3. Creative computer use 26 1.1.4. Design strategies and techniques 31 1.2. Overview 33 1.2.1. Main issues 34 1.2.2. The material 36 1.2.3. The framework of this thesis 37 2. CURRENT STATE AND BACKGROUND 39 2.1. New tools, old thoughts. 39 2.1.1. A misuse strategy 44 2.1.2. Emergence in design 47 2.1.3. Programming and design 50 2.1.4. Artificial intelligence 53 2.1.5. Human intelligence and artificial representations 53 2.2. Electronic dreams 54 2.2.1. The dream of intuitive software 55 2.2.2. The dream of the designing machine 60 2.2.3. The dream of self-emerging architecture; genetic algorithms in design 61 2.2.4. A cultural lag 62 2.3. Ideas and ideology 64 2.3.1. A personal perspective on the theories of the 1990s 65 2.3.2. "The suffering of diagrams" 68 2.3.3. Architectural theory and design methodology 69 2.4. Ideas on creativity 72 2.4.1. What is creativity? 73 2.4.2. Creativity, a cultural phenomenon. 75 2.4.3. Creativity in the information age 79 2.4.4. Creativity-enhancing techniques 81 2.4.5. Crucial fiicro-cultures 82 2.4.6. A proposal for a practitioner approach to creativity 83 2.5. Summary and conclusion of part 2 84 3. NEW DESIGN TECHNIQUES 86 3.1. Introduction 86 3.2. New technology - new strategy 87 3.3. Thinking through design practice: the inspirational playful design approach 88 3.4. A Corner stone: emergence 89 3.4.1. The source material 94 3.5. Recoding, translation and interpretation 95 A case: Tidsrom 97 3.6. Reconfiguring schemata 109 3.7. Rules and games 113 3.8. Virtuality and virtual models 118 3.8.1. What is "The Virtual"? 118 3.8.2. Virtual reality 119 Investigating "the virtual" 120 3.8.3. Analysing the virtual 126 3.9. Visual thinking (diagrams and visual thinking) 130 3.9.1. Visual Thinking and Abstraction. 130 3.9.2. A heuristic process 132 3.9.3. Visual thinking, skills and tacit knowledge 132 3.9.4. Media for visual thinking 133 3.10. Diagrammatic thinking 138 3.10.1. Descriptive diagrams 142 3.10.2. Generative diagrams 144 3.10.3. Versioning 149 3.10.4. Finding 153 3.10.5. Translation and interpretation 158 3.10.6. From generative diagram to program 168 3.10.7. Dynamic generative diagrams 171 3.11. The question of selection 175 3.12. Summary and conclusion of part 3 178 4. WAYS OF WORKING: FROM DESIGN PRACTICE TOWARDS THEORY AND DIGITAL DESIGN METHODS 179 4.1. Introduction 179 4.1.1. Practice-based research 180 4.1.2. Visual material is central. 180 4.1.3. Two investigation paths 180 4.1.4. Achievements 180 4.2. Methods 181 4.2.1. Explorative and generative research 182 4.2.2. A first-person approach 183 4.2.3. Analysis 184 4.2.4. The Material 185 4.3. Systematising creative computer use. Ways of working; techniques in creative computer use. 186 4.3.1. Categorization 186 4.3.2. Mapping the field of design computing. 187 4.3.3. Generic techniques 190 4.3.4. Specific techniques 192 4.3.5. Table of techniques 193 4.3.6. Examples of techniques 200 4.3.7. Traces of technology. 213 4.4. The further use of the generated material 219 4.4.1. Realisation strategies 221 4.4.2. Templates and scaffolds 223 4.5. Summary of Part 4 240 PART 5. WAYS OF THINKING: INTENTIONS IN CREATIVE COMPUTER USE. 241 5.1. Intentions 241 5.1.1. Categorising intentions 242 5.2. Intention themes 243 5.2.1. Cases and samples from Group one: Formal, phenomenal, spatial and geometrical themes 244 5.2.2. Intentions of response to the complexity of urban systems 297 5.3. The Hybrid Process 317 5.3.1. Hybridization strategies 319 5.3.2. The hybrid process and its elements. 328 6. SUMMARY AND CONCLUSIONS 344 6.1. Principles, concepts and methods for creative design computing 344 6.2. A new type of creativity? 348 6.3. A practice as the field for an investigation 349 6.4. Suggestions for further studies 349
series	thesis:PhD
type	normal paper
last changed	2007/04/08 16:11

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: