Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 71

Reformat results as: short short into frame detailed detailed into frame

_id	fbae
id	fbae
authors	Horne, Margaret
year	2005
title	Virtual Beirut
source	CUPUM05 9th International Conference on Computers in Urban Planning and Urban Management, London, 29-30 June 2005
summary	This paper describes how urban planners in Beirut are applying three-dimensional computer modelling to aid design decision making in the regeneration programme for the city. The study reports on the recent developments of a computer model of Beirut and its effectiveness in communicating the spatial characteristics of Martyr’s Square, a place of historic significance in the city. An international urban design competition for Martyr’s Square, and its new axis to the sea, is underway to identify new ideas for the development of this area. This paper reports on the process of creating the computer model and feedback from users. It considers future plans for further 3D modelling of the city centre to meet the needs of urban designers.
keywords	Beirut, 3D Modelling, Urban Planning, Virtual Reality
series	other
type	normal paper
email
more	http://128.40.111.250/cupum/searchPapers/index.asp
last changed	2006/06/08 00:05

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
doi	https://doi.org/10.52842/conf.ecaade.2005.331
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2005_a_7c_a
id	caadria2005_a_7c_a
authors	Anandan Karunakaran
year	2005
title	Organisation of Pedestrian Movements: an Agent-Based Approach
doi	https://doi.org/10.52842/conf.caadria.2005.305
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 305-313
summary	Cities are becoming more complex in this digital era due to technological changes. Thinking of cities without such technological changes is equivalent to an embryonic state in the morphology of city growth, that is, the growth seems less advanced. So it is appropriate to think of the non digital city digitally. Urban design is one state which establishes the perfect relationship between the street, people and building. The relationship of the people with the building and street is becoming one of the key factors in architecture. It has been observed that the design of a city has been influenced by the pedestrian movement. Many cities prior to the industrial era were largely determined by the social interactions based on walking. Thus the pedestrians play a key role in the formation of the city. They are a very important component in any representation of transport movements. They generally terminate or initiate a chain of linked activities, and if observed carefully, a single pedestrian movement is meant to include various sub journeys from one location to another. In order to organize pedestrians, we need to understand the pedestrian movement system. Though there is a lot of development of urban models in this aspect, it is still in a nascent state in comparison with the digital advancement. Thus much research work is carried out which can be applied to any given environmental setting, and as a result urban designers can respond to the changing socio-cultural technologies.
series	CAADRIA
last changed	2022/06/07 07:54

_id	caadria2005_b_5b_c
id	caadria2005_b_5b_c
authors	Andreas Voigt, Helena Linzer
year	2005
title	Added Value: Implementation of User Requirements in City Simulators
doi	https://doi.org/10.52842/conf.caadria.2005.337
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 337-343
summary	The following contribution discusses the possible consequences of the concept of City Simulators and Digital City Models, which can be obtained from a previously conducted user inquiry in an Urban Planning Department. At the core of the examination are the additional benefit (added value) and the increasing acceptance of digital planning techniques by its users which can be made possible by the implementation of user requirements in City Simulators. Various experiments for cooperative planning in the urban space are formulated.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	2005_729
id	2005_729
authors	Asanowicz, Alexander
year	2005
title	Computer Renderings – „Reality is Overrated”
doi	https://doi.org/10.52842/conf.ecaade.2005.729
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 729-735
summary	In this paper, two problems concerning truthfulness of computer-generated visualization are considered. The first one concerns relationships between reality and its representation by computer renderings. The second problem concerns the kind of representations people need. These problems are analyzed for static perception of architectural forms based on computer visualization, and for dynamic walk-through perception of urban space. The thesis of the paper is that many photorealistic renderings are excessively realistic and thus not true. In this context, a new question arises: do we need the true representation of an object? The author claims that we need “adequate” pictures. Adequate means a picture that is satisfactory in particular situation. The problem of equivalence of media (renderings and animations) and reality is not that important here. Much research is concerned with the truthfulness and falsity of information. However, they do not take into consideration that frequently what seems to be real exerts bigger influence on people than what is in fact real. Understanding this problem may help us in producing images that better correspond to people’s expectations.
keywords	Perception, Rendering, Non-Photorealistic Rendering
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2005_491
id	2005_491
authors	Beirão, José and Duarte, José
year	2005
title	Urban Grammars: Towards Flexible Urban Design
doi	https://doi.org/10.52842/conf.ecaade.2005.491
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 491-500
summary	Traditional urban plans have definitive design systems, without the flexibility required to deal with the complexity and change that characterise contemporary urban societies. To provide urban plans with increased flexibility, it is proposed a design methodology capable of producing various design solutions instead of a specific definitive design. The methodology uses shape grammars as a process for generating urban design. In this approach, design becomes a system of solutions rather than a specific one. Through the analyses of a group of urban plans, a design methodology was sketched in which rules are used to enable more flexibility. These plans where chosen for their perceived qualities in terms of language, planning efficiency, and latent flexibility. As a result, a four-phased methodology was identified and thus, proposed for designing urban plans. This methodology was then combined with shape grammars and tested in a design studio setting. Students were asked to use the methodology and shape grammars as auxiliary instruments in the design of a flexible plan for a new town. In the following year, to simulate real-world conditions and oblige students to consider urban ordering and scale, work was structured differently. First, students were asked to develop a rule-based urban plan as in the previous year. Second, they were asked to conceive a detail plan for a sector of an urban plan defined by another group of students following its rules. The plans were then analysed with the goal of refining the methodology. Results show that shape grammars produce urban plans with non-definitive formal solutions, while keeping a consistent spatial language. They also provide plans with explicit and implicit flexibility, thereby giving future designers a wider degree of freedom. Finally, they provide students with a concrete methodology for approaching urban design and foster the development of additional designing skills.
keywords	Shape Grammars, Flexible Urban Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2005_b_6a_c
id	caadria2005_b_6a_c
authors	Bige Tunçer, Özer Ciftcioglu, Sevil Sariyildiz, Michael Cumming
year	2005
title	Intelligent design support
doi	https://doi.org/10.52842/conf.caadria.2005.436
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 436-446
summary	Design is a complex process that is information and communication intensive. In a design context, the use of knowledge technologies can assist designers in making informed design decisions. This paper reports on an educational experiment that implements an intelligent urban design aid. This experiment facilitates students to do research in a systematic way by using ICKT methods, techniques and tools in order to improve the quality of their urban design. We outline the process, describe the intelligent techniques, discuss the results of the educational experiment, and explore the approach’s potential for real-life design practices.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2020_112
id	sigradi2020_112
authors	Brandao, Jaqueline; Costa, Frederico Ribeiro; Silva, Geovany
year	2020
title	Morphological transformations in Brazilian peripheral areas: a case study of the Vila Cabral neighborhood at Campina Grande-PB
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 112-119
summary	This article describes an analysis of the morphological changes between 2005 and 2020 in the Vila Cabral neighborhood, located on the outskirts of the Brazilian city of Campina Grande. The research was developed in two different analytical scenarios, adopting the algorithmic- parametric computational implementation as a methodology, and applying the following procedures: (i) formal decomposition of a sample of the urban fabric; (ii) visibility graph analysis (VGA); (iii) analysis of the diversity of uses and (iv) analysis of urban density (populational and built). The study demonstrated that the association of different urban analysis tools strengthens decision-making in the context of evidence-based urban design.
keywords	Algorithmic-parametric urban analysis, Evidence-based design, Urban morphology, Campina Grande, Brazilian peripheral sprawl
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	sigradi2005_679
id	sigradi2005_679
authors	Bruscato Portella, Underléa; Juan Puebla Pons
year	2005
title	On the ways of expression in present architecture
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 679-683
summary	This paper aims at introducing the main aspects of a research on architectural representation and the usage of new technologies in the process of development of an architectural project, which has been conducted at a department of Graphical Expression. The authors of this paper would like to outline the most excellent and innovating aspects introduced by a number of architectural proposals which involve actively the application of these techniques. The chosen case studies for this paper are among the European contemporary architectural panorama. The authors will analyze some projects of architectural studios which were involved in the urban transformation brought about by celebration of the Forum of the Cultures 2004. These new ways of architectural representation have had, in this specific case, a significant effect within the context of a technological revolution that allows the conception of new forms and textures and the reflection on the increasingly complex processes to generate architectural space. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2005_1_54_91
id	cf2005_1_54_91
authors	CANEPARO Luca, MASALA Elena and ROBIGLIO Matteo
year	2005
title	Dynamic Generative Modelling System for Urban and Regional Design
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 259-268
summary	This paper introduces a dynamic generative modelling system for urban and regional design. Through dynamic modelling the system evolves in time according to the interactions of the planners, decision-makers and citizens. On the basis of several synchronous and/or asynchronous user interactions, models are dynamically generated at run time. The models are built by defining the data (datasets) and the actions to perform on that data (tasks). The system reads and correlates data at urban and regional scale from various authorities to generate dynamic datasets. Tasks are especially powerful when they integrate generative procedures in a hierarchical structure. This allows us to model urban and regional dynamics through the interaction of tasks at micro- and macro-scale. Tasks can also implement either Cellular Automata or software agents. We examine the system application to a case project: the simulation of micro- and macro-dynamics in an Alpine valley, with specific challenges to fit competitive and sustainable growth in a landscape quality perspective. The simulation in spatial and temporal dimensions of regional data provided us with the elements to study the territorial evolution over the next twenty years. Four strategies gave as many scenarios highlighting the results of specific policies.
keywords	large-scale modelling, participatory design, GIS, software agent, datascape
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	sigradi2005_558
id	sigradi2005_558
authors	Carlos, Juliano; Cecílio Batista Oliveira
year	2005
title	Dismissible packings of this atomic and electronic age
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 558-563
summary	Discuss concepts of urban nomadic and the revision of the contemporary habitation, from the reading of recent architectural proposals. It presents alterations of the international architecture after years 60, as the introduction of new medias in the domestic space and the life in society – the television, the radio, the communications for satellite and the computer – and boom technological with the production of new materials for the civil construction – the mega-structures in steel, new types of plastic, etc… - and the consequent unfoldings in the contemporary architecture. Analyze two works of the English group Archigram, (middle of 60), relating them with the production of three European offices in activity today. It concludes pointing future trends in the conception and production of the habitation, as the real necessity of its plastic, programmatical and technician-constructive rediscussion, searching to take care of the real necessities of its user, through special flexibility and plurifuntionality, beyond the incorporation of new technologies. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2005_603
id	sigradi2005_603
authors	Castañé, Dora; Claudio Deho, Adrián Barcesat, Carlos Tessier
year	2005
title	Urbamedia: the design of an integrated system of urban-building visualization and communication
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 603-608
summary	This paper presents the advancements of the Urbamedia project which was designed as part of a research program at the Center CAO (Creation computer assist), School of Architectural Design and Urbanism, University of Buenos Aires, which was led by the valued master and advisory professor Architect Arturo F. Montagu. This proposal of the city of Buenos Aires on the Mayo Avenue expands the original historical fragment presented between the following two referenced representative landmarks: The Two Congresses Square and the Mayo Square. It continues with the advancement of methodologies and techniques implemented in a system of “integrated visualization and communication” for the development of a VRML (Virtual Reality Modeling Language) 3D virtual non-immersive and interactive vision. It also incorporates the development of a “foundation of digitally integrated knowledge” with fragments of central areas from other surrounding cities as well as interfaced phenomenological situations. The application of digital VRML technology has allowed for thoroughly researching the processes through dynamic simulation of specific urban fragments (Mayo Avenue within Buenos Aires) and the cities that are also participating in the project. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	2005_501
id	2005_501
authors	Celani, Gabriela, Pupo, Regiane, Mendes, Gelly and Pinheiro, Érica
year	2005
title	Generative Design Systems for Housing
doi	https://doi.org/10.52842/conf.ecaade.2005.501
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 501-506
summary	The present paper describes an undergoing research that aims at developing a generative design computer implementation with an outside-in approach, OIDS. The system will allow developing and visualizing context-based housing development designs. This approach will include both natural characteristics of the site and the existing neighboring buildings. It is argued that certain common urban design practices are the result of a simplification due to difficulties in dealing with the irregularities of the natural environment, which often requires the use of time-consuming methods. The computer-based application will provide tools for dealing with such difficulties, allowing designers to describe their own design rules. In an initial phase of the project, a tool that can subdivide irregular land parcels into equally sized areas has been developed. In further stages, other environmental variables will be addressed, such as solar aspect and prevalent wind directions. Eventually, even the designs of interior layouts should result from exterior forces. The resulting generative system is expected to facilitate and encourage the use of a more organic approach to building siting and design, bringing about the important discussion about which should be the main forces in the generation of the built environment.
keywords	Generative Design; Context-Based Design; Housing Design; Building Siting; Urban Space Simulation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2005_1_22_147
id	cf2005_1_22_147
authors	CHAN Chiu-Shui, DANG Anrong and TONG Ziyu
year	2005
title	A 3D Model of the Inner City of Beijing
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 63-72
summary	This study has two major concentrations: 1) exploring methods of creating a digital city model, and 2) applying the model to study urban spatial structure, an issue of particular interest and importance to urban planners. Based on existing studies that primarily address two-dimensional (2D) urban structure, this paper focuses on the three-dimensional (3D) structure relating to the 3D urban form. Given their greater clarity and possibilities for quantitative analysis, both 3D digital urban models and GIS spatial overlay analysis methods hold tremendous potential for analysing and predicting future urban form. In this project, the Xidan Business District in Beijing's Inner City was the area selected to implement the digital-city application. Under the hypothesis that the existing urban spatial structure is determined by the city's urban planning scheme and current urban marketing forces, it is found that actual urban development does not follow the planning restrictions on zoning and building height regulations. Some contradictions and conflicts, such as building location and height, appeared in the studied district. The specific reasons for the discrepancies need to be further studied.
keywords	3D city modeling, GIS, remote sensing, virtual environments
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_122
id	ecaade2011_122
authors	Chronis, Angelos; Jagannath, Prarthana; Siskou, Vasiliki Aikaterini; Jones, Jonathan
year	2011
title	Sensing digital co-presence and digital identity: Visualizing the Bluetooth landscape of the City of Bath
doi	https://doi.org/10.52842/conf.ecaade.2011.087
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.87-92
summary	The impact of ubiquitous digital technologies on the analysis and synthesis of our urban environment is undoubtedly great. The urban topography is overlaid by an invisible, yet very tangible digital topography that is increasingly affecting our urban life. As W. J. Mitchell (Mitchell 2005) pointed out, the digital revolution has filled our world with “electronic instruments of displacement” that “embed the virtual in the physical, and weave it seamlessly into daily urban life”. The mobile phone, the most integrated mobile device is closely related to the notion of a digital identity, our personal identity on this digital space. The Bluetooth is the mainly used direct communication protocol between mobile phones today and in this scope, each device has its own unique ID, its “MAC address”. This paper investigates the potential use of recording and analysing Bluetooth enabled devices in the urban scale in understanding the interrelation between the physical and the digital topographies.
wos	WOS:000335665500009
keywords	Pervasive systems; digital presence; urban encounter; digital identity
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2005_535
id	sigradi2005_535
authors	Costa, Lucia Maria S.A .; Yuri Queiroz Abreu Torres, Erivelton Muniz da Silva, Leonardo Ventapane, Ana Lucia Cordeiro Luz
year	2005
title	Carioca urban waters: digital representations
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 535-539
summary	The main objective of this paper is to discuss the value of digital graphic representation as a tool to display research findings in Landscape Architecture and Urban Design. This is discussed through the presentation of a web site named Águas Urbanas Cariocas. The paper, after briefly presenting the research context, explains the process of the making of the site, highlighting its main aspects. It concludes arguing the value of graphic representation as one of the ways of interacting different knowledges. [Full paper in Portuguese]
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: