Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 559

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2005_a_7c_d
id	caadria2005_a_7c_d
authors	Jin Yeu Tsou, Jie He, Yucai Xue
year	2005
title	An Open Space with Scenery: ‘Greenscape Index’ for Performance Based Planning of High Density Urban Habitation
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 328-334
doi	https://doi.org/10.52842/conf.caadria.2005.328
summary	This paper presents an improvement of the original openness ratio concept, which has been formulated as an integrated index for early-stage urban open space planning and design support. The ‘greenscape index’ is a rating system which quantitatively integrates human visual perception with the visible landscape resources to evaluate the visual quality of open space vision within high-density urban environment. This new index is expected to provide more comprehensive environmental performance consideration criteria for urban planning and design. The research team also discusses the potential of the introducing this index to assess both psychological preference and physical form of urban open spaces. The new concept also has shown its feasibility on integrating key environmental considerations in visual sensitivity, urban wind, urban noise and solar heat gain into simple massing study which is applicable in the preliminary planning stage.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
doi	https://doi.org/10.52842/conf.ecaade.2005.331
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2005_b_6a_c
id	caadria2005_b_6a_c
authors	Bige Tunçer, Özer Ciftcioglu, Sevil Sariyildiz, Michael Cumming
year	2005
title	Intelligent design support
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 436-446
doi	https://doi.org/10.52842/conf.caadria.2005.436
summary	Design is a complex process that is information and communication intensive. In a design context, the use of knowledge technologies can assist designers in making informed design decisions. This paper reports on an educational experiment that implements an intelligent urban design aid. This experiment facilitates students to do research in a systematic way by using ICKT methods, techniques and tools in order to improve the quality of their urban design. We outline the process, describe the intelligent techniques, discuss the results of the educational experiment, and explore the approach’s potential for real-life design practices.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	cf2005_1_54_91
id	cf2005_1_54_91
authors	CANEPARO Luca, MASALA Elena and ROBIGLIO Matteo
year	2005
title	Dynamic Generative Modelling System for Urban and Regional Design
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 259-268
summary	This paper introduces a dynamic generative modelling system for urban and regional design. Through dynamic modelling the system evolves in time according to the interactions of the planners, decision-makers and citizens. On the basis of several synchronous and/or asynchronous user interactions, models are dynamically generated at run time. The models are built by defining the data (datasets) and the actions to perform on that data (tasks). The system reads and correlates data at urban and regional scale from various authorities to generate dynamic datasets. Tasks are especially powerful when they integrate generative procedures in a hierarchical structure. This allows us to model urban and regional dynamics through the interaction of tasks at micro- and macro-scale. Tasks can also implement either Cellular Automata or software agents. We examine the system application to a case project: the simulation of micro- and macro-dynamics in an Alpine valley, with specific challenges to fit competitive and sustainable growth in a landscape quality perspective. The simulation in spatial and temporal dimensions of regional data provided us with the elements to study the territorial evolution over the next twenty years. Four strategies gave as many scenarios highlighting the results of specific policies.
keywords	large-scale modelling, participatory design, GIS, software agent, datascape
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2005_771
id	2005_771
authors	Gavrilou, Evelyn, Bourdakis, Vassilis and Charitos, Dimitris
year	2005
title	Documenting the Spatial Design of an Interactive Multisensory Urban Installation
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 771-778
doi	https://doi.org/10.52842/conf.ecaade.2005.771
summary	The paper documents the design and implementation of an interactive multi-sensory environment (DETOUR) created by the interdisciplinary group VE_Design for an international open-air exhibition in Athens, Greece during the summer of 2004. The paper describes the creative process followed throughout the project and registers how computers, sensors and effectors have been utilised to either facilitate the creation of electronically mediated experiences or support the design. The architectural concept of the multi-sensory installation is analyzed in relation to its potential for creating communicative experiences as well as addressing physical form simulations. Notions such as ephemeral structures, parasites, social space, game as art and communication are discussed. The body – space interaction is investigated, enabling the team to elaborate on a modular construction. Finally, the impact of the work is discussed on the basis of recorded observations by visitors.
keywords	Interactive Multi-Sensory Environment; Ephemeral Space; Public Art;Embodied Spatial Experience; Simulation of Physical Form.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	cf2005_1_33_194
id	cf2005_1_33_194
authors	HE Jie, TSOU Jin Yeu, XUE Yucai and CHOW Benny
year	2005
title	A Visual Landscape Assessment Approach for High-density Urban Development
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 125-134
summary	The rapid developments of economy and urbanization bring great pressure to natural environment and resources, which contribute big challenge to sustainable urban development in high-density urban areas like Hong Kong, China and many other Eastern Asia cities. In these areas, protecting natural landscape resources and enhancing visibility to urban spaces and residential zones has become significant in improving the livability of human settlement. This paper presents a new approach in assessing the visual quality in high-density urban environment. The principal methodology is to quantitatively integrate human visual perception parameters with the visible landscape resources' characteristics. GIS is employed as the database and technical platform. A residential development in Hong Kong was used as a case study. The approach provides decision making support to urban planning, site layout design, and estate management during the early stage of the schematic design/planning process.
keywords	visual perception, visual quality assessment, urban planning, GIS
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	fbae
id	fbae
authors	Horne, Margaret
year	2005
title	Virtual Beirut
source	CUPUM05 9th International Conference on Computers in Urban Planning and Urban Management, London, 29-30 June 2005
summary	This paper describes how urban planners in Beirut are applying three-dimensional computer modelling to aid design decision making in the regeneration programme for the city. The study reports on the recent developments of a computer model of Beirut and its effectiveness in communicating the spatial characteristics of Martyr’s Square, a place of historic significance in the city. An international urban design competition for Martyr’s Square, and its new axis to the sea, is underway to identify new ideas for the development of this area. This paper reports on the process of creating the computer model and feedback from users. It considers future plans for further 3D modelling of the city centre to meet the needs of urban designers.
keywords	Beirut, 3D Modelling, Urban Planning, Virtual Reality
series	other
type	normal paper
email
more	http://128.40.111.250/cupum/searchPapers/index.asp
last changed	2006/06/08 00:05

_id	acadia06_510
id	acadia06_510
authors	Johnson, Jason
year	2006
title	Complexity as a Creative Force in Design Variegation, Heterogeneity, Diversity
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 510-517
doi	https://doi.org/10.52842/conf.acadia.2006.510
summary	This paper describes an experimental project that attempts to use complexity as a creative and vital force within the design process. The project seeks to release architecture from its conventional role as a static urban backdrop and to transform it into a vital, dynamic, and active participant within cities. The project, entitled “Energy Farm”, was instigated by the 2005 International Open Design Competition for a “Performing Arts Island” located within the Han River in Seoul, Korea. Through the exploration of the site and program elements as an interacting matrix of fields, forces, and flows (energy, program, water flow, infrastructure, etc.), our proposal emerged as a variegated landscape marked by its capacities to produce its own energy, interweave heterogeneous threads of structure and program, and instigate a diverse set of scenarios in which physical and virtual realms coalesce. Architecture, in its unique capacity to bridge these realms, can release the rich computation potential of complexity into the physical realm. Within this scenario, architecture becomes a creative and vital agent for productive change with profound social, political, and ecological implications.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	acadia20_38
id	acadia20_38
authors	Mueller, Stephen
year	2020
title	Irradiated Shade
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 38-46.
doi	https://doi.org/10.52842/conf.acadia.2020.1.038
summary	The paper details computational mapping and modeling techniques from an ongoing design research project titled Irradiated Shade, which endeavors to develop and calibrate a computational toolset to uncover, represent, and design for the unseen dangers of ultraviolet radiation, a growing yet underexplored threat to cities, buildings, and the bodies that inhabit them. While increased shade in public spaces has been advocated as a strategy for “mitigation [of] climate change” (Kapelos and Patterson 2014), it is not a panacea to the threat. Even in apparent shade, the body is still exposed to harmful, ambient, or “scattered” UVB radiation. The study region is a binational metroplex, a territory in which significant atmospheric pollution and the effects of climate change (reduced cloud cover and more “still days” of stagnant air) amplify the “scatter” of ultraviolet wavelengths and UV exposure within shade, which exacerbates urban conditions of shade as an “index of inequality” (Bloch 2019) and threatens public health. Exposure to indirect radiation correlates to the amount of sky visible from the position of an observer (Gies and Mackay 2004). The overall size of a shade structure, as well as the design of openings along its sides, can greatly impact the UV protection factor (UPF) (Turnbull and Parisi 2005). Shade, therefore, is more complex than ubiquitous urban and architectural “sun” and “shadow studies” are capable of representing, as such analyses flatten the three-dimensional nature of radiation exposure and are “blind” to the ultraviolet spectrum. “Safe shade” is contingent on the nuances of the surrounding built environment, and designers must be empowered to observe and respond to a wider context than current representational tools allow.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	955b
id	955b
authors	Rafi, A
year	2005
title	Information and communication technology (ICT) and intelligent cities: A Malaysian experience
source	In Mao-Lin, C. (Ed.), CAAD talk 4: Insights of digital cities (pp. 229-248), Taipei, Taiwan: Archidata
summary	This paper reports on Malaysian’s experience in suggesting and maintaining two cybercities (i.e. Putrajaya and Cyberjaya) or Intelligent Cities. The advantage of the convergence of technology has been implemented at national level as a means to increase human participation and to prosper in the Digital Age, in their daily life, business, education and other urban activities. It starts with an overview of ‘High-tech Corridors’ in Asia countries namely Philippines, Thailand, South Korea, and Singapore and its impact to these countries. The foundation of this study presents the criteria of Intelligent Community (IC) that makes a city intelligent without excluding the value of the citizen quality of life, culture and religion by associating with the Information and Communications Technology (ICT). We introduce and present www.i-Putra.com.my, a portal of digital soft city of Malaysia’s new administrative Capital, Putrajaya. This national project is funded by Putrajaya Holdings Sdn. Bhd. Malaysia and was originally developed by the Multimedia University before finally executed by I-Design Sdn. Bhd. It is designed to be an interactive channel to provide the services for different level of target audiences of the civic and urban activities. The guiding principle for i-Putra.com.my portal is content, context, community and commerce in which they will be integrated with the city information such as residential, commercial, service and public areas. It is hoped that this paper gives an example of good intelligent city concepts through a clear vision and planning, effective management, implementation and sustainable approach.
keywords	intelligent city, intelligent community (IC), ICT, High-tech Corridors
series	book
type	normal paper
email
last changed	2007/09/13 03:39

_id	caadria2005_b_4b_b
id	caadria2005_b_4b_b
authors	Seichter, Hartmut, Schnabel, Marc Aurel
year	2005
title	Digital and Tangible Sensation: An Augmented Reality Urban Design Studio
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 193-202
doi	https://doi.org/10.52842/conf.caadria.2005.193
summary	Traditionally urban design is perceived, communicated and created using physical and digital media. However, these realms are handled as separate entities, which hinder collaboration, understanding and communication. Collaborative Augmented Reality (AR) systems can integrate these tasks into one media type and allow a different conversation with complex issues. Human Computer Interfaces and Tangible User Interfaces play key role in AR. They allow an engagement with both the real and virtual component of an urban design project. This paper describes an urban design studio that employs AR as medium of collaboration, the theoretical framework of sense of presence, the understanding and the quality of the resulting design.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	2005_415
id	2005_415
authors	Tramontano, Marcelo and Mônaco dos Santos, Denise
year	2005
title	Online_communities
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 415-423
doi	https://doi.org/10.52842/conf.ecaade.2005.415
summary	Research on contemporary habitation spaces is directly related to the study of the relationship between new media and everyday life. This paper presents ongoing in-depth research which intends to discuss these relationships in different ways on a conceptual basis. A collaborative multi-users interface is being specially designed, supported by different kinds of electronic equipment. Furthermore, the project’s objective is to analyze how these information and communication technologies are to be used, as well as their impact on poor communities. As a hypothesis, our intention is to verify if the access to information will be able to broaden social interactions and improve new services which have been set up, in order to guarantee a better quality of life. Beyond being a conceptual approach, the study intends to present and examine facts obtained from intervening in a poor district in São Paulo city, Brazil. Using an existing public telecenter as an access provider to the internet, individual TV-connected set-top boxes in 220 apartments in a local social housing complex are being installed, enabling users to communicate through a collaborative multiusers digital interface. Adding a virtual instance to a geographically-based community, the aim of the project is to provide new possibilities to improve dialogue and debates, to encourage more income and cultural activities. It also intends to evaluate the effects of the technological mediation of social relationships, both inside and outside the community, as well as within the physical urban space such as in the dwellings. The results of this study will be useful in defining public policies to be implemented by the Sao Paulo Local Government. The work is being sponsored by FAPESP, which is the Sao Paulo State Funding Agencie, but also by public institutions, private partners and universities. Researchers involved belong to complementary fields such as architecture, urbanism, computer sciences, social sciences, psychology and electronic engineering.
keywords	Virtual Communities, Collaborative Networks, Digital Inclusion
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2005_a_7c_a
id	caadria2005_a_7c_a
authors	Anandan Karunakaran
year	2005
title	Organisation of Pedestrian Movements: an Agent-Based Approach
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 305-313
doi	https://doi.org/10.52842/conf.caadria.2005.305
summary	Cities are becoming more complex in this digital era due to technological changes. Thinking of cities without such technological changes is equivalent to an embryonic state in the morphology of city growth, that is, the growth seems less advanced. So it is appropriate to think of the non digital city digitally. Urban design is one state which establishes the perfect relationship between the street, people and building. The relationship of the people with the building and street is becoming one of the key factors in architecture. It has been observed that the design of a city has been influenced by the pedestrian movement. Many cities prior to the industrial era were largely determined by the social interactions based on walking. Thus the pedestrians play a key role in the formation of the city. They are a very important component in any representation of transport movements. They generally terminate or initiate a chain of linked activities, and if observed carefully, a single pedestrian movement is meant to include various sub journeys from one location to another. In order to organize pedestrians, we need to understand the pedestrian movement system. Though there is a lot of development of urban models in this aspect, it is still in a nascent state in comparison with the digital advancement. Thus much research work is carried out which can be applied to any given environmental setting, and as a result urban designers can respond to the changing socio-cultural technologies.
series	CAADRIA
last changed	2022/06/07 07:54

_id	caadria2005_b_5b_c
id	caadria2005_b_5b_c
authors	Andreas Voigt, Helena Linzer
year	2005
title	Added Value: Implementation of User Requirements in City Simulators
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 337-343
doi	https://doi.org/10.52842/conf.caadria.2005.337
summary	The following contribution discusses the possible consequences of the concept of City Simulators and Digital City Models, which can be obtained from a previously conducted user inquiry in an Urban Planning Department. At the core of the examination are the additional benefit (added value) and the increasing acceptance of digital planning techniques by its users which can be made possible by the implementation of user requirements in City Simulators. Various experiments for cooperative planning in the urban space are formulated.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	2005_729
id	2005_729
authors	Asanowicz, Alexander
year	2005
title	Computer Renderings – „Reality is Overrated”
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 729-735
doi	https://doi.org/10.52842/conf.ecaade.2005.729
summary	In this paper, two problems concerning truthfulness of computer-generated visualization are considered. The first one concerns relationships between reality and its representation by computer renderings. The second problem concerns the kind of representations people need. These problems are analyzed for static perception of architectural forms based on computer visualization, and for dynamic walk-through perception of urban space. The thesis of the paper is that many photorealistic renderings are excessively realistic and thus not true. In this context, a new question arises: do we need the true representation of an object? The author claims that we need “adequate” pictures. Adequate means a picture that is satisfactory in particular situation. The problem of equivalence of media (renderings and animations) and reality is not that important here. Much research is concerned with the truthfulness and falsity of information. However, they do not take into consideration that frequently what seems to be real exerts bigger influence on people than what is in fact real. Understanding this problem may help us in producing images that better correspond to people’s expectations.
keywords	Perception, Rendering, Non-Photorealistic Rendering
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2005_491
id	2005_491
authors	Beirão, José and Duarte, José
year	2005
title	Urban Grammars: Towards Flexible Urban Design
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 491-500
doi	https://doi.org/10.52842/conf.ecaade.2005.491
summary	Traditional urban plans have definitive design systems, without the flexibility required to deal with the complexity and change that characterise contemporary urban societies. To provide urban plans with increased flexibility, it is proposed a design methodology capable of producing various design solutions instead of a specific definitive design. The methodology uses shape grammars as a process for generating urban design. In this approach, design becomes a system of solutions rather than a specific one. Through the analyses of a group of urban plans, a design methodology was sketched in which rules are used to enable more flexibility. These plans where chosen for their perceived qualities in terms of language, planning efficiency, and latent flexibility. As a result, a four-phased methodology was identified and thus, proposed for designing urban plans. This methodology was then combined with shape grammars and tested in a design studio setting. Students were asked to use the methodology and shape grammars as auxiliary instruments in the design of a flexible plan for a new town. In the following year, to simulate real-world conditions and oblige students to consider urban ordering and scale, work was structured differently. First, students were asked to develop a rule-based urban plan as in the previous year. Second, they were asked to conceive a detail plan for a sector of an urban plan defined by another group of students following its rules. The plans were then analysed with the goal of refining the methodology. Results show that shape grammars produce urban plans with non-definitive formal solutions, while keeping a consistent spatial language. They also provide plans with explicit and implicit flexibility, thereby giving future designers a wider degree of freedom. Finally, they provide students with a concrete methodology for approaching urban design and foster the development of additional designing skills.
keywords	Shape Grammars, Flexible Urban Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2020_112
id	sigradi2020_112
authors	Brandao, Jaqueline; Costa, Frederico Ribeiro; Silva, Geovany
year	2020
title	Morphological transformations in Brazilian peripheral areas: a case study of the Vila Cabral neighborhood at Campina Grande-PB
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 112-119
summary	This article describes an analysis of the morphological changes between 2005 and 2020 in the Vila Cabral neighborhood, located on the outskirts of the Brazilian city of Campina Grande. The research was developed in two different analytical scenarios, adopting the algorithmic- parametric computational implementation as a methodology, and applying the following procedures: (i) formal decomposition of a sample of the urban fabric; (ii) visibility graph analysis (VGA); (iii) analysis of the diversity of uses and (iv) analysis of urban density (populational and built). The study demonstrated that the association of different urban analysis tools strengthens decision-making in the context of evidence-based urban design.
keywords	Algorithmic-parametric urban analysis, Evidence-based design, Urban morphology, Campina Grande, Brazilian peripheral sprawl
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	sigradi2005_679
id	sigradi2005_679
authors	Bruscato Portella, Underléa; Juan Puebla Pons
year	2005
title	On the ways of expression in present architecture
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 679-683
summary	This paper aims at introducing the main aspects of a research on architectural representation and the usage of new technologies in the process of development of an architectural project, which has been conducted at a department of Graphical Expression. The authors of this paper would like to outline the most excellent and innovating aspects introduced by a number of architectural proposals which involve actively the application of these techniques. The chosen case studies for this paper are among the European contemporary architectural panorama. The authors will analyze some projects of architectural studios which were involved in the urban transformation brought about by celebration of the Forum of the Cultures 2004. These new ways of architectural representation have had, in this specific case, a significant effect within the context of a technological revolution that allows the conception of new forms and textures and the reflection on the increasingly complex processes to generate architectural space. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: