Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 519

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2005_b_5a_b
id	caadria2005_b_5a_b
authors	De-Lun Huang, Shen-Guan Shih
year	2005
title	A Case-Based Decision Support System for Housing Refurbishment
doi	https://doi.org/10.52842/conf.caadria.2005.288x.r0c
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 288-299
summary	Effective communication is a key for ensuring quality of housing refurbishment. This paper provides a framework of decision support system for housing refurbishment that helps designers better communicate with tenants who generally lack expert knowledge and can not express their needs clearly. The framework is constructed using Case-Based Reasoning (CBR) for retrieving past similar cases to meet the challenges and demands of the present refurbishment project at hand. With the help of the system, users can retrieve past cases that match the users’ requirements and revise them to meet current needs. It can also be used as design criteria for evaluating the final product to ensure its conformance with the initial planning. A test case is used to demonstrate the system’s suitability. The effectiveness of this system is supported by a post-experiment evaluation and interview with the tenant concerning his satisfaction on the refurbishment.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	sigradi2005_362
id	sigradi2005_362
authors	Jemtrud, Michael; Konstantin Privalov
year	2005
title	“User Controlled LightPath” Enabled Participatory Design Studio: first steps
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 362-368
summary	The technical scheme and creative scenario of a new media-based “User Controlled Lightpath Provisioning” (UCLP) enabled “Participatory Design Studio” will be elaborated. This practical collaborative work environment model represents a technologically robust and sophisticated means of communication and sharing of resources that stands to radically transform design processes. UCLP technology is a fibre based software solution designed to enable end-users to create their own discipline or application-specific IP network whose topology and architecture is optimized for their particular applications needs and requirements. A distinction between “task-based collaboration” found in conventional “Virtual Design Studios” and the heterogeneous nature of the “participatory” work environment will be made. UCLP technology provides a secure, large bandwidth, low latency network that can accommodate up to 10Gbps. This capability creates an environment which is not dependent upon traditional low bandwidth requirements for communication, visualization, and production therefore allowing a greater range of desired tools for creative activity.
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2005_b_3c_f
id	caadria2005_b_3c_f
authors	Kai-Ming Yang
year	2005
title	A bodily user interface for VR-CAVE
doi	https://doi.org/10.52842/conf.caadria.2005.129
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 129-135
summary	The main purpose of this research is to explore how body movement can increase user’s sense of presence in the virtual reality cave (VR-CAVE). Traditionally, in architectural applications, there is no interaction between users and VR-CAVE. Visual perception is the major way of presentation. The users feel certain level of sense of presence. Therefore, in order to increase user’s sense of presence, we designed a bodily user interface as our controller which utilized user’s body movement to interact with VR. The contribution is that not only a user can easily or effortlessly control and navigate VR space but also VR navigation will directly link to the experience of walking in a physical space, which provides strong sense of presence to user.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	cf2005_1_63_131
id	cf2005_1_63_131
authors	YAN Wei and KALAY Yehuda
year	2005
title	Simulating Human Behaviour in Built Environments
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 301-310
summary	This paper addresses the problem of predicting and evaluating the impacts of the built environment on its human inhabitants. It presents a simulation system comprising a usability-based building model and an agent-based virtual user model. The building model represents both geometric information and usability properties of design elements, and is generated automatically from a standard CAD model. Virtual users are modelled as autonomous agents that emulate the appearance, perception, social traits and physical behaviour of real users (walking, sitting, meeting other virtual users, etc.). Their behaviour model is based upon theoretical and practical environment-behaviour studies, real world data from a field study, and Artificial Life research. By inserting the virtual users in the usability-enabled building model, and letting them “explore” it on their own volition, the system reveals the interrelationship between the environment and its users. The environment can then be modified, to see how different arrangements affect user behaviours.
keywords	behaviour simulation, behaviour study, human modelling, building modelling
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	acadia05_170
id	acadia05_170
authors	Barker, Daniel and Dong, Andy
year	2005
title	A Representation Language for a Prototype CAD Tool for Intelligent Rooms
doi	https://doi.org/10.52842/conf.acadia.2005.170
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 170-183
summary	Intelligent rooms are a type of intelligent environment which enhance ordinary activities within the confines of a room by responding to human interaction using pervasive and ubiquitous computing. In the design of intelligent rooms, the specification of how the intelligent room enacts intelligent behavior through computational means is as integral as the geometric description. The self-aware and context-aware capabilities of intelligent rooms extend the requirements for computer-aided design tools beyond 3D modeling of objects. This article presents a Hardware as Agents Description Language for Intelligent Rooms (HADLIR) to model hardware in an intelligent room as “hardware agents” having sensor and/or effector modalities with rules and goals. End-users describe intelligent room hardware as agents based on the HADLIR representation and write agent rules and goals in Jess for each hardware component. This HADLIR agent description and the requisite software sensors/effectors constitute “hardware agents” which are instantiated into a multi-agent society software environment. The society is then bridged to either a virtual environment to prototype the intelligent room or to microelectronic controllers to implement a physical intelligent room. The integration illustrates how the HADLIR representation assists in the design, simulation and implementation of an intelligent room and provides a foundation technology for CAD tools for the creation of intelligent rooms.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2005_1_36_100
id	cf2005_1_36_100
authors	BILDA Zafer and GERO John S.
year	2005
title	Do We Need CAD during Conceptual Design?
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 155-164
summary	This paper presents the results of experiments to test whether a designer necessarily needs to produce and utilize external representations in the very early phases of conceptual design. Three architects are engaged in two separate design processes, one is the experiment condition where they were not allowed sketch, and the other, the control condition where they were allowed to sketch. In the experiment condition, architects were required to put on a blindfold and think aloud while designing. The results show that in both conditions the design outcomes fit in the given dimensions of the site, accommodate the space requirements and allow an effective use for the clients. Thus, when the participants were blindfolded, they were able to produce designs by using their cognitive resources to create and hold an internal representation of the design rather than by sketching, or using a CAD tool. We finally raise the question: do architects need CAD representations during the conceptual phase of the design activity?
keywords	representations, protocol studies, conceptual design
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	sigradi2005_529
id	sigradi2005_529
authors	Bourdakis, Vassilis; Anna Chronaki
year	2005
title	A Social and gendered analysis of the utilization of a VR planning tool for public participation
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 529-534
summary	The paper is a follow-up to earlier work investigating the research hypothesis that Virtual Reality (VR) is nowadays a maturetechnology, suitable for communicating planning ideas. A work in progress involving the redesign of two squares within the urbanfabric of a deprived Athenian neighbourhood is presented. A VR model of existing and proposed layouts was constructed, focusingon accuracy of visualisation, ease of navigation, online spatialized commenting mechanism and ease of access. User groups weresupported with appropriate training—researchers had the opportunity to observe the reactions of people and deliver questionnairesthat help identify problem areas related to technophobia, disbelief, past knowledge, communication skills, understanding of thevisualisation system used, usability of the navigation system as well as the commenting mechanism. Gender and social exclusionare key issues in this particular multicultural neighbourhood. Collecting demographic data on all participants (age, sex, educationlevel, employment, marital status, etc.) during the commenting process enables a series of analyses testing the ways the system isused.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia05_236
id	acadia05_236
authors	Brandt, Jordan
year	2005
title	Skin That Fits: Designing and constructing cladding systems with as-built structural data
doi	https://doi.org/10.52842/conf.acadia.2005.236
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 236-245
summary	An awkward interface exists between the structure and skin of complex architecture. The primary structure is typically allowed much higher tolerance ranges than that of the cladding industry, due primarily to the delicate nature of the building envelope which, above all, must prevent water penetration and meet the aesthetic requirements of the architect and client. As architecture has integrated advanced design and fabrication techniques to realize increasingly complex shapes, this problem has been aggravated because of the tangency requirements for high gloss curved finish surfaces and the larger variations found with rolled steel columns and undulating concrete forms. To date, most innovations in this area have been focused upon mechanical connections that can be adjusted and shimmed, thus requiring increased design engineering and on-site labor costs for effective implementation. It would be preferable to manufacture cladding components that are properly adjusted to the actual site conditions, negating the need to predict and accommodate potential dimensional variation with complex connections. The research provides a model for implementing long distance laser scanning technology to facilitate a real-time parametric BIM, herein called an Isomodel.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2005_000
id	2005_000
authors	Duarte, José Pinto, Ducla-Soares, Gonçalo and Sampaio, A. Zita (Eds.)
year	2005
title	Digital Design: The Quest for New Paradigms
doi	https://doi.org/10.52842/conf.ecaade.2005
source	23nd eCAADe Conference Proceedings [ISBN 0-9541183-3-2], Lisbon (Portugal) 21-24 September 2005, 880 p.
summary	As the field of computer-aided design evolved over the last thirty years or so, it has witnessed five changes of emphasis in research direction. In the first stage, the use of computers in architecture focused on the development of Computer Aided Design (CAD), that is, systems that simulated the use of drafting tools, and research was mainly concerned with the satisfaction of designers' ergonomic needs. In the second stage, there were efforts to use computer tools in non-graphical aspects of designing, such as the use of Data Base Management Systems (DBMS) in the quantity survey of buildings. The concern was to satisfy the cognitive needs of designers by focusing on the way information and knowledge were perceived, acquired, stored, and processed. In the third stage, the focus shifted to the development of realistic models of buildings to permit the assessment of design proposals. In the fourth stage, the focus was on studies concerned with the encoding of architectural knowledge into design tools (KBMS), and the discussion was whether to go towards design automation or design supporting tools. In the fifth stage, with the advent of the Internet and the development of communication tools, research became focused on the collaborative and social aspects of design activity. In recent years, research also became concerned with the exploration of the physical implications of digital media in the production of artefacts. Today, there is a vast range of research interests and approaches, but the quest for new, unifying paradigms continues.
series	eCAADe
type	normal paper
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	acadia05_078
id	acadia05_078
authors	Fox, Michael and Hu, Catherine
year	2005
title	Starting From The Micro: A Pedagogical Approach to Designing Interactive Architecture
doi	https://doi.org/10.52842/conf.acadia.2005.078
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 78-93
summary	The paper outlines a pedagogical approach whereby a number of technology-intensive skills can be quickly learned to a level of useful practicality through a series of discrete, yet cumulative explorations with the design goal of creating intelligently responsive architectural systems. The culmination of such explorations in creating full-scale interactive architectural environments leads to a relatively unexplored area of negotiation whereby individual systems must necessarily manage environmental input to mediate a behavioural output. The emerging area of interactive architecture serves as a practical means for inventing entirely new ways of developing spaces, and the designing and building environments that address dynamic, flexible and constantly changing needs. Interactive architecture is defined here as spaces and objects that can physically re-configure themselves to meet changing needs. The central issues explored are human and environmental interaction and behaviours, embedded computational infrastructures, kinetic and mechanical systems and physical control mechanisms. Being both multidisciplinary and technology-intensive in nature, architects need to be equipped with at least a base foundational knowledge in a number of domains in order to be able to develop the skills necessary to explore, conceive, and design such systems. The teaching methods were carried out with a group of undergraduate design students who had no previous experience in mechanical engineering, electronics, programming, or kinetic design with the goal of creating a responsive kinetic system that can demonstrate physical interactive behaviours on an applicable architectural scale. We found the approach to be extremely successful in terms of psychologically demystifying unfamiliar and often daunting technologies, while simultaneously clarifying the larger architectural implications of the novel systems that had been created. The authors summarize the processes and tools that architects and designers can utilize in creating and demonstrating of such systems and the implications of adopting a more active role in directing the development of this new area of design.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	2005_771
id	2005_771
authors	Gavrilou, Evelyn, Bourdakis, Vassilis and Charitos, Dimitris
year	2005
title	Documenting the Spatial Design of an Interactive Multisensory Urban Installation
doi	https://doi.org/10.52842/conf.ecaade.2005.771
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 771-778
summary	The paper documents the design and implementation of an interactive multi-sensory environment (DETOUR) created by the interdisciplinary group VE_Design for an international open-air exhibition in Athens, Greece during the summer of 2004. The paper describes the creative process followed throughout the project and registers how computers, sensors and effectors have been utilised to either facilitate the creation of electronically mediated experiences or support the design. The architectural concept of the multi-sensory installation is analyzed in relation to its potential for creating communicative experiences as well as addressing physical form simulations. Notions such as ephemeral structures, parasites, social space, game as art and communication are discussed. The body – space interaction is investigated, enabling the team to elaborate on a modular construction. Finally, the impact of the work is discussed on the basis of recorded observations by visitors.
keywords	Interactive Multi-Sensory Environment; Ephemeral Space; Public Art;Embodied Spatial Experience; Simulation of Physical Form.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2005_b_4a_c
id	caadria2005_b_4a_c
authors	Halil I. Erhan, Ulrich Flemming
year	2005
title	User-System Interaction Design for Requirements Modeling
doi	https://doi.org/10.52842/conf.caadria.2005.160
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 160-170
summary	RaBBiT (Requirements Building for Building Types) provides computational support for architectural programming or requirements modeling in building design. A highly interactive graphical user interface (GUI) allows users to adapt RaBBiT to various programming styles and terminologies. Since users are not expected to have any prior computer programming experience, the design of RaBBiT’s GUI posed particular challenges, which we attempted to meet through a direct-manipulation interface based on the model-world metaphor.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	da71
id	da71
authors	Horne, Margaret
year	2004
title	Visualisation of Martyr’s Square, Beirut
source	CONVR2005 5th Conference of Construction Applications of Virtual Reality, ADETTI/ISCTE, Durham, UK, 12-13 September 2005
summary	Solidere, a Lebanese joint-stock company, was created by government decree in 1994 to reconstruct Beirut city-centre. The company, a form of public-private partnership, has a majority share holding of former owners and tenants of city-centre property. Several projects are underway, including the redevelopment of Place des Martyrs, once the bustling heart of Beirut but badly damaged during the war. Urban planners in Beirut have recently developed a 3D computer model to visually describe the spatial characteristics of Martyr’s Square and its context, prior to inviting design proposals for an international competition. This paper describes issues pertaining to the development of the model to meet the needs of urban designers and town planners. It also considers potential future uses of the simulation, outlining areas for further research and development.
keywords	Beirut, 3D Modelling, Visual Simulation, Town Planning
series	other
type	normal paper
email
last changed	2006/06/08 22:10

_id	2005_427
id	2005_427
authors	Jakovich, Joanne and Beilharz, Kirsty
year	2005
title	Multimodal Spatial Emergence in the Design of Sensate Spaces
doi	https://doi.org/10.52842/conf.ecaade.2005.427
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 427-432
summary	Design of reactive, intelligent and sensate spaces is a form of spatial design that demands creating thinking in terms of non-permanent, non-tactile and sometimes non-visual media. This implies spatial conceptualization using sensory modalities that are ordinarily of secondary importance to vision in design, such as proprioception and hearing. This paper explores these alternative modalities for both spatial perception and spatial expression with a view to developing innovative interfaces for spatial design. Computer games and installation art environments are analyzed for use of alternative spatial immersion techniques. This informs a physical spatial interaction environment. Motion-capture input and digital auditory output provide real-time, intuitive feedback to the user. Useful interaction strategies are acquired that can be used in a non-intrusive manner in sensate spaces for communal, commercial, or public contexts.
keywords	Spatial Emergence; Multimodal Perception; Computer Games; Installation Art; Auditory Feedback
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2005_a_8b_a
id	caadria2005_a_8b_a
authors	Jia-Yih Joy Chen, Taysheng Jeng
year	2005
title	A Context-Aware Home for Child-minding
doi	https://doi.org/10.52842/conf.caadria.2005.403
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 403-412
summary	This paper introduces the concept of context awareness to the application of designing an interactive home with emphasis on child-minding. We setup the functional requirements of a context-aware home and seek the technology to provide safety monitor and real-time guidance for kid who is temporarily alone at home. The approaches presented are: (1) Survey and Research Scope (2) User Life Pattern Observations (3) Activity Zones and Scenarios (3) Context Database and Context Manager (4) Media and Interface (5) Evaluation. The process and result will lead our following applications of context awareness in future interactive home study.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ijac20053205
id	ijac20053205
authors	Kacher, Sabrina; Halin, Gilles; Bignon, Jean-Claude; Humbert, Pascal
year	2005
title	A method for Constructing a Reference Image Database to Assist with Design Process. Application to the Wooden Architecture Domain
source	International Journal of Architectural Computing vol. 3 - no. 2, 227-244
summary	Designing architectural projects requires the introduction of references, because design is an activity oriented towards a result which does not yet exist. If we summarise the current categories used in Artificial Intelligence to characterise the different forms of reasoning, we are able to consider that design is more the concern of the induction or the abduction mechanism than the deduction mechanism. Moreover, the main characteristic of the designer's activity is to work towards non-routine situations with the use of many references. In this paper we will present method principles to construct a reference image database. These references will enable the designer to further in solving the design problem. To illustrate these reference usage, we choose photographic images belonging to the wooden construction domain We also present at the end of the paper an experiment which aims to evaluate the real help that this reference image database can bring to designers during their creation task.
series	journal
last changed	2007/03/04 07:08

_id	sigradi2005_178
id	sigradi2005_178
authors	Kenzari, Bechir
year	2005
title	Synthesis of cutting-edge technologies and miniature tooling in the physical modelling of architectural objects designed on CAD
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 178-183
summary	Developments made in the Rapid Prototyping and CAD/CAM (including CNC and Laser) Technologies are giving designers the advantage of building physical realities, at whatever scale, directly and automatically from computer files, with the explicit implications of speed, precision and flexibility. Yet there are modeling details that can only be solved through the use of specialized materials, accessories and miniature tools which neither fall under the CNC, laser or rapid prototyping categories, but complement them. The most emphatic aspect of this research is to show how technical expertise, craftsmanship and detailing in the making of physical models require the intervention of not-so-well-known tools and machines. In the absence of an ideal technology to convert all 3-d digital models into physical models, and despite the advent of CAD-CAM and Rapid Prototyping, the combination of high technology and miniature tooling becomes the ultimate way to go in order to solve many modeling requirements.
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2005_108
id	sigradi2005_108
authors	Martens, Bob; Martijn Stellingwerff
year	2005
title	Creating Physical Models Using Virtual Reconstructions: Mixed CAM-techniques for a Viennese Synagogue Scale-model
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 108-113
summary	In the framework of a preceding SiGraDi-conference the virtual reconstruction work of Viennese Synagogues was elaborated. The focus of this continued research project is laid on historic/reconstructive modeling, which has specific requirements towards the modeling and subsequent production of scale models. In this paper, the prerequisites of 3D-printing and lasercutting technology for model making will be presented. This includes aspects of scale and handling of individual building elements regarding the possibilities and limitations for each specific CAM-technique. Compared to the rendering models, the modeling procedures for scale-model fabrication had to be adjusted. For example, certain dimensions for details and the structural strength of 3D-printed parts have to be taken into account. Due to economical and constructional reasons as well the printing time involved, a scale-model should be created by means of mixed CAM-techniques; building components have to be split up and assigned accordingly.
keywords	Virtual heritage, Rapid Prototyping, 3D-printing (3DP), Lasercutting
series	SIGRADI
email
last changed	2016/03/10 09:55

For more results click below: