Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 13 of 13

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2006_e165b
id	sigradi2006_e165b
authors	Angulo, Antonieta
year	2006
title	Optimization in the Balance between the Production Effort of E-learning Tutorials and their related Learning Outcome
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 122-126
summary	This paper provides evidence on the level of media richness that may be cost effective in the development of e-learning tutorials for teaching and learning computer visualization techniques. For such a purpose the author provides an analysis of low-cost / high-impact media rich products, the effort and cost required in their development and the measurement of related learning outcomes. Circa twenty years of R&D of multimedia and hypermedia applications for instruction have demonstrated the benefits of communicating relevant information to learners using engaging media. Based on this evidence, this paper assumes that due to the cognitive style of design students, the instructional packages for learning computer techniques for design visualization that are rich in media content, tend to be more effective. Available visualization technologies make the development of e-learning tutorials feasible and apparently the logical way to implement our instructional packages. However the question in the development of e-learning tutorials becomes a more strategic one when we are called to reach a level of optimization between producing a package with a basic standard, namely; text & still-graphic based tutorials, or a state-of-the-art package that is based on video demonstrations (more than enough?) that can accommodate the students’ learning requirements and also our production costs. The costs include the human resources (instructor, producers, assistants and others) and the material resources (hardware and software, copies, and others) involved in the creation of the e-learning tutorials. The key question is: What is good enough, and what is clearly superfluous? In order to confirm our hypothesis and propose a relevant balance between media richness and learning effectiveness, this paper describes an experiment in the use of two different levels of media richness as used to deliver instructions on the production of computer animations for design visualization. The students recruited for this experiment were fairly familiarized with the use of 3D modeling concepts and software, but had no previous knowledge of the techniques included in the tutorials; in specific; camera animation procedures. The students, separated in two groups, used one of the two methods; then they proceeded to apply their newly acquired skills in the production of an animation without using the help of any external means. The assessment of results was based on the quality of the final product and the students’ performance in the recall of the production procedures. Finally an interview with the students was conducted on their perception of what was accomplished from a metacognitive point of view. The results were processed in order to establish comparisons between the different levels of achievement and the students’ metacognitive assessment of learning. These results have helped us to create a clear set of recommendations for the production of e-learning tutorials and their conditions for implementation. The most beneficial characteristics of the two tested methods in relation to type of information, choice of media, method of information delivery, flexibility of production/editorial tools,! and overall cost of production, will be transferred into the development of a more refined product to be tested at larger scale.
keywords	e-learning tutorials; media richness; learning effectiveness; cognitive style; computer visualization techniques
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2014_092
id	ecaade2014_092
authors	Sherif Abdelmohsen
year	2014
title	A BIM-based Framework for Assessing Architectural Competition Entries
doi	https://doi.org/10.52842/conf.ecaade.2014.2.473
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 473-483
summary	Architectural competitions have been traditionally used to select best design practices. The basis of assessment for competitions has typically involved non-technical concepts of quality, subjective and emotional appreciations of experiences, and inseparable accord of formal, functional, aesthetic and contextual values (Rönn, 2011), rather than clear-cut objective and precisely measured values as in the engineering domain (Nashed, 2005; Nelson, 2006). Criteria for judgment usually focus on design parti and clarity of concept, novelty of architectural approach, context compliance, spatial organization, functional adaptability, economical solutions, and design flexibility. The assessment process, although presumably comprehensive and involving multiple evaluation techniques and resources, may still overlook important technical issues that may be fundamentally significant to the exclusion or approval of a given entry. This paper introduces a framework for assessing architectural competition entries aided by concepts of building information modeling (BIM).
wos	WOS:000361385100050
keywords	Building information modeling; architectural competitions; design evaluation; best practices; rule checking
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2006_p016d
id	sigradi2006_p016d
authors	Cavalcanti Neto, José Rodrigues and Leão de Amorim, Arivaldo
year	2006
title	Simulação digital: modelos digitais fotorealísticos no mapeamento e quantificação de patologias em projetos de restauração [Digital Fabrication: photo realistic digital models on mapping and quantifing the pathologies in restoration design]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 341-345
summary	This article is about the experience in the use of digital threedimensional models as an auxiliary tool in the phase of diagnosis on an architecture project of restoration. At first it deals with the importance and the methodology usually used in development of those projects. After telling about an experience that urged to look for new solutions, it was made a first exercise searching a new tool. It had about positive points the fact of being modeled quickly, to have made possible a clear vision of the pathologies and for being easily manipulable, providing a dynamic visualization of the construction. Another experience looked for the possibilities of analysis and quantification of damages in a photorealistic model. Afterwards analyzing the different potentials and restrictions of each accomplished experiment, this work looks for point out news ways that can be followed.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	eaea2005_115
id	eaea2005_115
authors	Hoelscher, Christoph and J. Alexander Schmidt
year	2006
title	User needs at the heart of town: Orientation and appraisal in an endoscopic city scale model (script)
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 115-131
summary	In this paper we provide a “work-in-progress” report on on going investigation into the perception of building alternatives at a central urban place. The city-planning task in this case involves the development of several key parcels of real estate, with significant impact on a mediumsized German city’s overall appearance and functionality. The interests of investors wishing to maximize economic utilization are competing with public interests regarding urban planning and urban design as well as development needs. Hence, there is a need for the development of different spatial layouts for the district to help identify reasonable concepts for the use of these key properties and their impact on the visual townscape as well as the functional spatial properties of the city’s open space. Ultimately, clear deed restrictions and guidelines are to be identified for future investors to preserve the cityscape and to improve the quality of the existing public open space but also to enhance downtown’s existing sensible economic equilibrium.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	eaea2005_151
id	eaea2005_151
authors	Ohno, Ruyzo
year	2006
title	Seat preference in public squares and distribution of the surrounding people: An examination of the validity of using visual simulation
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 151-163
summary	Public squares are shared by people who use them for various purposes. When people choose seats in a square, they unconsciously evaluate not only the physical characteristics of the space but also the distribution of others already present (Hall, 1966; Sommer, 1969; Whyte, 1988). Knowing the hidden rules of this behaviour will be important in designing squares that remain comfortable even in crowded situations. Most past studies of seat choice preference have reported on statistical tendencies derived from observations of subject behavior in actually existing sites (i.e., Abe, 1997; Imai, 1999; Kawamoto, 2003). However, they provide no clear theoretical model for explaining the basic mechanisms regulating such behaviour. The present study conducts a series of experiments in both real and virtual settings in order to extract quantitative relationships between subjects’ seat preferences and the presence of nearby strangers and to clarify what factors influence their seat choices.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	a3c8
id	a3c8
authors	Verdy Kwee, Dean Bruton, Antony Radford
year	2006
title	Visual Expressiveness in Educative Architectural Animations
source	Proceedings of the 4th international conference on Computer graphics and interactive techniques in Australasia and Southeast Asia. 2006, Kuala Lumpur, Malaysia November 29 - December 02, 2006
summary	Consider the current graphic capabilities of multimedia authoring tools. Many information technologies have been exploited to the fullest in the gaming and advertising industries. As far as educational materials produced to explain outstanding architectural and many heritage works, most publications still rely on print media. While much digital information has been propagated online through the Internet (and a few CD-ROM formats could also be found) the techniques of delivery have yet to take advantage of potential technologies, preferring only to digitally replicate and hyperlink the structure and content found in their printed cousins. The reason for this slow adoption is not clear and paradoxical since our society places abundant emphasis and stresses the importance of education over games. However, it seems that the industry and, more importantly, the architecture discipline themselves do not appear to promote architectural visualisations as a significant contributor to the education and learning process. Therefore, educative architectural information visualisation may have to set itself apart, especially to generate growth and interest in this area. This paper does not deal with the technical aspects of visualisation creation processes but proposes to emphasise architectural visualisations – animations, in particular - as a heightened form of art that could be approached with grammatical lens more than merely a technical exercise that aims to serve an outcome or an industry as they are often perceived now. Digital architectural visualisations and their delivery techniques can be expanded much more as an artistic (architectural) expression like architectural writings are to authors, games to game designers. Although differences could be identified, there are numerous lessons that can be drawn from other forms of art to propel architectural visualisations to a new level beyond those seen in real-estate websites, architectural practices and most students’ works in reputed educational institutions. Architectural information is peculiar to each building. In order to explicate the essences of architectural works (i.e. the vocabularies, designer’s intents, etc), in all fairness, their presentations cannot be generically produced and uniformly adapted. What one technique and approach could successfully achieve in explaining one building cannot exactly be re-applied to another building with the same expected results. Forms, scales, circulation paths, lighting assignments, designer’s intents, other information (and types) to be delivered differ from one building to another. As such, executions are also wide open to be explored to not only address the practical issues but also to express the intentions of the author/s or director/s to strengthen the architectural narratives. This paper highlights and illustrates by examples, specifically in architectural flythroughs/animations, considerations that need to be addressed in order that the results would serve as an artistic/architectural expression with a degree of educative substance.
keywords	Educative, education, animation, flythrough, expression, grammar, art,
series	other
type	short paper
email
more	http://portal.acm.org/citation.cfm?id=1174429.1174461&coll=GUIDE&dl=%23url.coll
last changed	2007/01/04 00:14

_id	2006_810
id	2006_810
authors	Dokonal, Wolfgang and Knight,Michael
year	2006
title	Pen or PC? - Is Sketching essential to architectural design?
doi	https://doi.org/10.52842/conf.ecaade.2006.810
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 810-817
summary	This paper reports on an ongoing student architectural design project that is investigating the differing effects of the use of PC’s or Pens in the design process. We are interested to see whether designing wholly on the computer with a volume modeling software would produce differing results to a traditional design process with a strong basis in 2D sketching. To minimize the influence of the participants previous experience in either the use of PC’s or the pen, we have been working with very young students that have not yet gone through a traditional training on architectural design and CAAD software. This is one of the key aspects of our experimental procedure. We have found that recent software developments in the field of CAAD clearly have and will influence the way architects design and brings the computer as a design tool to the “normal architect”. Until very recently the computer was seen as a design tool almost solely for “computer geeks” in the profession, the majority of architects still using it mainly as a drafting machine or to produce visualizations of their projects after a more ‘conventional’ design process had finished. It is now very clear to us that the ongoing change in technology will have a profound effect on the way all of us will work in future undertaking architectural design. It is an important question for every school of architecture what effect these developments will have on our teaching methods and the curricula. We use the above mentioned ongoing educational project to find out about the benefits and risks of using the computer as a design tool for first year students.
keywords	Early Design stages; Collaborative Design; Sketching
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ijac20064107
id	ijac20064107
authors	Elger, Dietrich; Russell, Peter
year	2006
title	Crisis? What crisis? Approaching information space: New dimensions in the field of architecture
source	International Journal of Architectural Computing vol. 4 - no. 1, 107-121
summary	The paper describes the current situation concerning career opportunities in the field of architecture in developed western countries. Several aspects that are almost universal mark this situation. Firstly, there are too many architects chasing traditional work in competition with other engineers. Secondly, the needs of the building industry have changed over the past years so that the skills that architects are able to offer are not necessarily those that are sought. Lastly, the constant specialisation of work has continued unabated. Architects, as generalists, have seen their areas of expertise be usurped from neighbouring fields. The situation is not lost, so long as architects are able to recognise what is desired from the point of view of the client and what is desired from the point of view of the architect. For educators, it must be clear that the real potential architects possess is their encompassing knowledge of the building information. Architectural Information Management is a necessary skill to be taught alongside the more traditional architectural skills. A brief outlook as to how this might come about is detailed in the paper. The authors propose didactic steps to achieve this. Primarily, the education of computer supported planning should not simply end with a series of lectures or seminars, but culminate in integrated Design Studios (which include Design-Build scenarios).
keywords	Architectural Information Management; Computer Supported Design Studios; CSCW
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00008
last changed	2007/03/04 07:08

_id	c8de
id	c8de
authors	Horne, Margaret; Hamza, Neveen
year	2006
title	Integration of Virtual Reality within the Built Environment Curriculum
source	ITCon Vol.11 pp. 311-324
summary	Virtual Reality (VR) technology is still perceived by many as being inaccessible and cost prohibitive with VR applications considered expensive to develop as well as challenging to operate. This paper reflects on current developments in VR technologies and describes an approach adopted for its phased integration into the academic curriculum of built environment students. The process and end results of implementing the integration are discussed and the paper illustrates the challenges of introducing VR, including the acceptance of the technology by academic staff and students, interest from industry, and issues pertaining to model development. It sets out to show that fairly sophisticated VR models can now be created by non-VR specialists using commercially available software and advocates that the implementation of VR will increase alongside industry’s adoption of these tools and the emergence of a new generation of students with VR skills. The study shows that current VR technologies, if integrated appropriately within built environment academic programmes, demonstrate clear promise to provide a foundation for more widespread collaborative working environments.
keywords	virtual reality, built environment, integration, academic curriculum
series	journal paper
type	normal paper
email
more	http://itcon.org/2006/23/
last changed	2006/06/07 23:49

_id	sigradi2006_000
id	sigradi2006_000
authors	Soza, Pedro (ed.)
year	2006
title	SiGradi2006
source	Proceedings of the 10th Iberoamerican Congress of Digital Graphics Graphics / ISBN 956-19-0539-6] Santiago de Chile (Chile) 21-23 november 2006, 494 p.
summary	Forty years of development have passed since digital technologies were used in the service of design for the first time but many of the early questions about its usefulness are still open. The beginning [early] period, known as call “analytical”, was founded in a rational and reductionist understanding of the phenomenon, including those related to creative processes. The target was rational optimization for possible solutions around a given problem. Later on, the graphic technologies development meant a huge jump in issues concerning 3D representation of designed objects. A great interest in visualization and “the virtual” then arose: almost everything and any shape, could be modelled and visualized, obtaining representations of space, time, light and matter as never seen before in any field related to imaging. Today these useful technologies are amplified due to the connectivity of the web, stimulating the birth of applications and models which seek to optimize the production processes. However, before of its impact, there is still a question waiting to be answered since the first days of CAD: has all this technology actually allowed the development of better design? The answer doesn’t seem to be obvious, when above all we see ourselves facing the context of a global world that becomes more and more complex. Digital technology is developing very rapidly. Despite this, an equally accelerated improvement in design products is not so clear. The reason for this could be the fact that our practices as designers have not been updated and improved at the same speed as technology. This next Sigradi is about debating how our organizational practices are changing with the digital phenomenon and how the users can positively trigger the potential that lies in these technologies. The hypothesis that underpins this question is the consideration that digital technologies are a unique platform to achieve the necessary integration of knowledge that must feed any contemporary design process. We think that the integration of multidisciplinary knowledge, memories, values and imagination must become the starting point in the production of better design.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	sigradi2006_c116c
id	sigradi2006_c116c
authors	Vergara Cortes, Mario
year	2006
title	Geometria del Sonido, Sala de conciertos D.U.M.B.O. , Brooklyn, N.Y..C. [Sound Geometry: Brooklyn Bridge Park Concert Halls]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 325-329
summary	Friedrich Schelling's famous quote, "Architecture is Frozen Music" attempted to find a relationship between the solidity of architecture and the intangibility of music in his era. While the Baroque, and subsequent Rococo, styles in architecture contain a plasticity and flow of ornament that seems to validate the statement, it does not go beyond purely surface characteristics. If we look at the purpose, goal and process of both music and architecture, finding clear relationships is difficult, though this does not deter architects from finding inspiration in music, and vice-versa.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	caadria2013_135
id	caadria2013_135
authors	Williams, Nick; Daniel Davis, Brady Peters, Alexander Peña De León, Jane Burry and Mark Burry
year	2013
title	FabPOD: An Open Design-to-Fabrication System
doi	https://doi.org/10.52842/conf.caadria.2013.251
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 251-260
summary	Digital workflows from the design to the production of buildings have received significant recent attention in architectural research. The need for both integrated systems for design collaboration (Boeykens and Neuckermans, 2006) and clear and flexible communication flows for non-standard fabrication outcomes have been identified as fundamental (Scheurer, 2010). This paper reports on the development of a digital “design system” for the design and prototyping of an acoustic enclosure for meetings in a large open work environment, theFabPod. The aim was to keep this system open for temporal flexibility in as many aspects of the finalisation of the design as possible. The system provides novel examples of both integrated collaboration and clear communication flow. (1) Acoustics is included as a design driver in early stages through the connection of digital simulation tools with design models. (2) Bi-directional information flows and clear modularisation of workflow underpins the system from design through to fabrication and assembly of the enclosure. Following the completion and evaluation of the FabPod prototype, the openness of the system will be tested through its application in subsequent design and prototyping iterations. Design development will respond to performance testing through user engagement methods and acoustic measurement.
wos	WOS:000351496100025
keywords	Digital workflow, Prototyping, Acoustic simulation, Collaborative design
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia06_546
id	acadia06_546
authors	Williamson, Shane
year	2006
title	Stock Space
doi	https://doi.org/10.52842/conf.acadia.2006.546
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 546-547
summary	Modest in budget and ephemeral in nature, STOCK SPACE was installed, exhibited, and dismantled over a five-day period at the Toronto National Trade Center as part of an invited exhibition of concept spaces at the 2005 Toronto Interior Design Show. Occupying 450 square feet within an 110,000-square-foot convention center, STOCK SPACE was small, vertical, warm, and quiet, in contrast to the immense horizontality of the mechanically cooled trade floor of nearly 40,000 exhibitors and attendees. STOCK SPACE was an investigation of limits. Material had to fit through doors and on our CNC milling bed. It had to clear staircases, be carried by hand, and be stored compactly within the confines of our fabrication area. STOCK SPACE was an exercise in subtraction. The space was created through the removal of stock material from a conceptually full volume that measured 24’ long x 18’ wide x 12’ tall. High density EPS foam in 4’x 8’ x 16” modules provided a light and machinable medium capable of recording the vestigial marks of fabrication as well as providing adequate dampening and insulation. The resulting assemblage of stacked modules embodied traits of the orthographic grid associated with the length and width of the stock, the topographic contours associated with the depth of the stock and the isoparametric grooves of the resulting surface. The collective composition of these elements was the analytical result of maximum machining curvature.
series	ACADIA
email
last changed	2022/06/07 07:57

No more hits.