Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 622

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2006_047
id	caadria2006_047
authors	SHAI YESHAYAHU, A.; B. MARIA VERA
year	2006
title	CUT, COPY, PASTE SOCIETY
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 47-52
doi	https://doi.org/10.52842/conf.caadria.2006.x.g1r
summary	You and I were not born in the 1990’s thus our experience about the true modalities of circulation and communication that have substantially transformed the methods that form and inform us today, are not really “pure”. Why? Because we know how slow time was before the communication boom of this last decade and because some of us still believe that we must read to be inform and thus, visit a bookstore, library or friends house and get peeks inside a subject of matter. So experiencing life as we bypass the book _ that’s a story of a brand new era! Taking note of the enormous changes this era brings, is fundamental to our current pedagogic undertakings. We seek data about the differences that lie in the way individuals, which never knew a world before or between analogue and digital zones, process information. It signals a dramatic shift in cognitive realms that is deeply imbedded in our emerging socio-economic spheres. So, you say “hypothesizing that economic, technologic, and cultural fluxes fabricate new means to learn and think, is not a fresh idea”_ True. But, it led us to ask one fundamental question _What are the upcoming learning habits employed by the “post digital” society? We noted that the post digital generation is an avid cut, copy, paste society that is able to extract information from infinite resources and mix, remix in diversified modes, through time and in real-time. We think these abilities are strengths, which will permit students to multitask yet they strongly differ from the academic agendas that are concerned with meditative processes and qualitative interdisciplinary task. As aspiring academics interested in the reconfiguration of current pedagogic formats we seek a creative intervention for future design generations, one that can benefit both the upheavals of the cultural world and the integrity of the academic setting where a pedagogy that links extended fields of knowledge with shifting cognitive habits can emerge. In this arena where cognition plays an important role, our goals are challenging and difficult, especially in the beginning years when the foundations set forward leaves lasting impressions. Thus, letting go of familiar grounds and tuning to continual alterations of the immediate surroundings enables us to seek means that facilitate important readings for our current learning/teaching processes. Demystifying changes and embracing differences as design potentials for new interventions are basic programmatic elements that permit us to incorporate a rigorous research agenda in the design exercises. Our presentation will project the current state of our teaching modality and provide examples of current studio work. It will demonstrate how everyday rituals, journeys and research observations, are documented by a society that heralds a new academic setting.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2016_013
id	ascaad2016_013
authors	Belkis Öksüz, Elif
year	2016
title	Parametricism for Urban Aesthetics - A flawless order behind chaos or an over-design of complexity
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 105-112
summary	Over the last decade, paradigm shifts in the philosophy of space-time relations, the change from space-time to spatio-temporality, caused significant changes in the design field, and introduced new variations and discourses for parametric approaches in architecture. Among all the discourses, parametricism is likely the most spectacular one. The founder of parametricism, Patrik Schumacher (2009) describes it as “a new style,” which has “the superior capacity to articulate programmatic complexity;” and “aesthetically, it is the elegance of ordered complexity in the sense of seamless fluidity.” In its theoretical background, Schumacher (2011) affiliates this style with the philosophy of autopoiesis, the philosophy that stands between making and becoming. Additionally, parametricism concerns not only the physical geometry in making of form; but also discusses the relational and causal aspects in becoming of form. In other words, it brings the aesthetic qualities in making through the topological intelligence behind becoming. Regarding that, parametricism seems an effective way of managing /creating complex topologies in form-related issues. However, when it comes to practice, there are some challenging points of parametricism in large-scale design studies. Thus, this work underlines that the dominance of elegance for urban planning has the potential of limiting the flexible and dynamic topology of the urban context, and objectifying the whole complex urban form as an over-designed product. For an aesthetic inquiry into urban parametricism, this paper highlights the challenging issues behind the aesthetic premises of parametricism at the urban design scale. For that, Kartal Master Plan Design Proposal by Zaha Hadid Architects (2006) will be discussed as an exemplary work.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	sigradi2006_e033b
id	sigradi2006_e033b
authors	Castillo, Tim
year	2006
title	Hybrid[s] : new pedagogical applications for designing our evolving spatial environment
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 131-136
summary	The continual emergence of new informational and technological systems has impacted our cultural landscape. As society continues to evolve, we are becoming more connected to virtual systems that impact our spatial environment. The awareness and understanding of these invisible forces requires new curricular pedagogies in architectural education. This paper will document an ongoing course that was developed to research new methodologies for working with haptic environments and informational systems. Utilizing a high performance-computing center, students in the class are developing new adaptive intelligent spatial systems that engage a multiplicity of scales. They researched environments for PDA’s (Personal Data Assistance), I-Pods, cellular phones, GPS (Guidance Positioning Systems) and a new immersive virtual dome environment. The goal of the class was to reevaluate how architectural practice in the future will encompass a more holistic approach to both physical and virtual spatial development.
keywords	Design tools and methods
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	2006_290
id	2006_290
authors	Cenani, Sehnaz and Gulen Cagdas
year	2006
title	Shape Grammar of Geometric Islamic Ornaments
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 290-297
doi	https://doi.org/10.52842/conf.ecaade.2006.290
summary	Shape grammars are the algorithmic systems used to analyze existing designs or create new ones. In spite of using text or symbols to express abstract representations, shape grammars aid to create novel designs through computational effort with shapes and rules. Many probabilities of rule selections and applications of these rules may generate emergent design solutions or create new design objectives. This paper aims to present the characteristics, shape grammar rules and historical background of geometrical ornaments in Islamic culture and to point out the possibilities of mathematics of symmetry. The knowledge presented in this paper can be used to generate new depictions and to gain new application areas like typography, wallpaper, landscape, façade design, tiling, jewelry, and textile designs. Even, these types of shape grammar studies can be used to open a novel approach as in Jean Nouvel’s “Arab World Institute” in Paris. The role of shape grammar analysis of geometrical Islamic ornaments explained in this paper is to increase the efficiency of architectural design education by facilitating the formal understanding of historical patterns. Novel use of shape grammars in education can enrich the designer’s ability to generate original designs. In this paper variants of Islamic ornaments are created with a CAAD program. A selected geometrical bezeme (ornament) from Islamic ornamental design is generated by encoding with a computer programming language. According to the generated bezeme, interaction scenario is as follows: Computer has the main control over grammar application. Only, some of the rules can be selected by the user. Varieties of this ornament are generated randomly through their line weight, line colors, filling types and filling colors. The shape grammar rules outlined in this paper are simple, but the resulting figures can be very inspiring. Furthermore, the endless potential for future design innovations is unlimited.
keywords	Computer-generated geometrical design; shape grammar rules; geometrical Islamic ornaments; Islamic patterns
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2015_246
id	caadria2015_246
authors	Fok, Wendy W.
year	2015
title	Delineating Crowd Sourced Ownership in the Digital Age for the Built Environment
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 43-52
doi	https://doi.org/10.52842/conf.caadria.2015.043
summary	Time Magazine, had named the “Person of the Year” to “YOU” (the crowd) in 2006 , due to the infinite potentials of the thousands and millions of ‘yous’ who control the media and financing within the new digital democracy. These same citizens of digital innovation create the new platforms—seen in the early beta developments of Kickstarter, Twitter, Wikipedia, and Facebook—and contribute to the manipulation of international exchange of information and power, creating value propositions beyond the traditional product complexity of the market. Peer exchange and crowd organizational strategy will be used to innovate the built environment, and it is pertinent for “digital” property and “real” property to recognize and benefit from this emergence. Professional codes of conduct, economic values, and legal regulations have become a means to an end of the designing of digital and physical property, as digital barriers lift much of the necessary pre-cautions that is required to govern collaboration. This body of research explores the qualifying factors of open innovation identity between the creators and the consumers, the state of design ethics and ownership uncertainties pertaining to the combinatory methods and mechanisms that employ these technologies.
keywords	Open Innovation; Crowd source; Authorship; Ownership; Digital Media; Digital Property; Physical Property.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2006_e090b
id	sigradi2006_e090b
authors	Hanna, Sean and Turner, Alasdair
year	2006
title	Teaching parametric design in code and construction
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 158-161
summary	Automated manufacturing processes with the ability to translate digital models into physical form promise both an increase in the complexity of what can be built, and through rapid prototyping, a possibility to experiment easily with tangible examples of the evolving design. The increasing literacy of designers in computer languages, on the other hand, offers a new range of techniques through which the models themselves might be generated. This paper reviews the results of an integrated parametric modelling and digital manufacturing workshop combining participants with a background in computer programming with those with a background in fabrication. Its aim was both to encourage collaboration in a domain that overlaps both backgrounds, as well as to explore the ways in which the two working methods naturally extend the boundaries of traditional parametric design. The types of projects chosen by the students, the working methods adopted and progress made will be discussed in light of future educational possibilities, and of the future direction of parametric tools themselves. Where standard CAD constructs isolated geometric primitives, parametric models allow the user to set up a hierarchy of relationships, deferring such details as specific dimension and sometimes quantity to a later point. Usually these are captured by a geometric schema. Many such relationships in real design however, can not be defined in terms of geometry alone. Logical operations, environmental effects such as lighting and air flow, the behaviour of people and the dynamic behaviour of materials are all essential design parameters that require other methods of definition, including the algorithm. It has been our position that the skills of the programmer are necessary in the future of design. Bentley’s Generative Components software was used as the primary vehicle for the workshop design projects. Built within the familiar Microstation framework, it enables the construction of a parametric model at a range of different interfaces, from purely graphic through to entirely code based, thus allowing the manipulation of such non-geometric, algorithmic relationships as described above. Two-dimensional laser cutting was the primary fabrication method, allowing for rapid manufacturing, and in some cases iterative physical testing. The two technologies have led in the workshop to working methods that extend the geometric schema: the first, by forcing an explicit understanding of design as procedural, and the second by encouraging physical experimentation and optimisation. The resulting projects have tended to focus on responsiveness to conditions either coded or incorporated into experimental loop. Examples will be discussed. While programming languages and geometry are universal in intent, their constraints on the design process were still notable. The default data structures of computer languages (in particular the rectangular array) replace one schema limitation with another. The indexing of data in this way is conceptually hard-wired into much of our thinking both in CAD and in code. Thankfully this can be overcome with a bit of programming, but the number of projects which have required this suggests that more intuitive, or spatial methods of data access might be developed in the future.
keywords	generative design; parametric model; teaching
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2006_101
id	caadria2006_101
authors	IVAN REDI, ANDREA REDI
year	2006
title	A.N.D.I. - A NEW DIGITAL INSTRUMENT: For networked creative collaboration in architecture and net.art
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 101-110
doi	https://doi.org/10.52842/conf.caadria.2006.x.i0a
summary	an open source software project, has objective to develop a run-time environment with the focus on the applications for the networked international and cross-disciplinary production in the creative sphere of architecture, urban planning, design and net.art. It is a digital environment which opens the possibilities to generate advanced projects in a networked society. This new working tools will increase the creativity, productivity and competitiveness of the involved actors by drawing upon and developing technologies for virtual, augmented and mixed realities. A.N.D.I. has two basic aspects. On the one hand it is a database driven collaborative environment and on the other hand it will enable the development of future software and tools for networked creative collaboration.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	acadia06_496
id	acadia06_496
authors	Jemtrud, Michael
year	2006
title	Eucalyptus: User Controlled Lightpath Enabled Participatory Design Studio
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 496-509
doi	https://doi.org/10.52842/conf.acadia.2006.496
summary	A new notion of participation is at stake with advances in technologically mediated work environments. The digitally mediated e-design studio has been around since the mid-1990’s and has been employed in various forms in disciplines including architecture/engineering/construction (AEC), industrial design, and the automotive industry. Insufficient bandwidth and insufficiently powerful, crudely coordinated tools resulted in distributed task-based modes of collaboration that did not allow full participation by members of the distributed design team. At the very least, the present “second generation” network severely limits the applications, tools, and modes of communication that can be used in data and visualization intense design scenarios. The emergence of Service Oriented Architectures and User-Controlled LightPaths (“intelligent infrastructure”) herald the beginning of a new age where fully participatory multi-site design may become possible. The networks, visualization & communication tools, Service Oriented Architecture & Web Services, work protocols, and physical site designs of the Participatory Design Studio (PDS) being developed by the authors will constitute one of the first working examples of this future. This paper will briefly outline the “mise en scène” or staging of the technical configuration of the Eucalyptus project; observations and results from the creative activity of the PDS in the context of two case studies; and speculate on the implications for design activity, pedagogy, and a more robust mode of participation.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ijac20064306
id	ijac20064306
authors	Klinger, Kevin R.; Vermillion, Joshua
year	2006
title	Visualizing the Operative and Analytic: Representing the Digital Fabrication Feedback Loop and Managing the Digital Exchange
source	International Journal of Architectural Computing vol. 4 - no. 3, 79-97
summary	Digital architecture is process-based and reliant upon a conversation between digital visualization, analysis, and production. With the complexity of information generated in process-based digital practices, we need to effectively manage and exchange the information. Feedback loops are integral to this process/product, and thus require extensive management of complex versions of visual and data related information. Quite a lot of scholarly attention has been focused upon highlighting innovative projects using digital fabrication and serial customization. However, there is a scarcity of scholarly work about innovations in visualizing and representing the design data integral in this feedback loop. This paper will examine innovative representational devices such as the matrix, sectioning, layering, bracketing, nesting, and other new forms of organizing, visualizing, analyzing, and simulating complex data, intent upon communicating multiple levels of operations during the design and fabrication process. With a rigorous taxonomy of operative and analytic devices for process-based digital design development, we can begin to outline a trajectory for future evolutions in practice. This writing is an attempt to make a few steps in this direction, and demonstrate some of these new representational ideas in practice.
series	journal
last changed	2007/03/04 07:08

_id	acadia06_190
id	acadia06_190
authors	Lindquist, Mark
year	2006
title	Web Based Collaboration (for Free) Using Wikis in Design Studios
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 190-199
doi	https://doi.org/10.52842/conf.acadia.2006.190
summary	This paper presents a case study of the use of Wikis by students in a landscape architecture design studio to evaluate the suitability of Wikis for enhancing student collaboration in the site analysis and preliminary design stage of a project. It was anticipated that using Wikis to facilitate collaboration would provide alternatives to conventional peer to peer collaboration. In addition, Wikis could enhance feedback between the course coordinator and students. The Wiki was used to collect, compile and present data for the purpose of a precedent study of cultural and physical analysis of a site in New Zealand, for which the technology proved successful. The Wiki was less successful in contributing to the collaborative preliminary design of the project. The following discussion and presentation will include the evaluation of online Wiki services, the process used in the design studio, strengths and weaknesses observed, and opportunities for future research.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	ascaad2006_paper7
id	ascaad2006_paper7
authors	Lömker, Thorsten M.
year	2006
title	Designing with Machines: solving architectural layout planning problems by the use of a constraint programming language and scheduling algorithms
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	In 1845 Edgar Allan Poe wrote the poem “The Raven”, an act full of poetry, love, passion, mourning, melancholia and death. In his essay “The Theory of Composition” which was published in 1846 Poe proved that the poem is based on an accurate mathematical description. Not only in literature are structures present that are based on mathematics. In the work of famous musicians, artists or architects like Bach, Escher or Palladio it is evident that the beauty and clarity of their work as well as its traceability has often been reached through the use of intrinsic mathematic coherences. If suchlike structures could be described within architecture, their mathematical abstraction could supplement “The Theory of Composition” of a building. This research focuses on an approach to describe principles in architectural layout planning in the form of mathematical rules that will be executed by the use of a computer. Provided that “design” is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a design problem, an exemplary method will be described to solve problems in architectural layout planning. Two problem domains will be examined: the design of new buildings, as well as the revitalization of existing buildings. Mathematical and syntactical difficulties that arise from the attempt to extract rules that relate to the process of building design will be pointed out. To avoid conflicts relating to theoretical subtleness a customary approach has been chosen in this work which is adopted from Operations Research. In this approach design is a synonym for planning, which could be described as a systematic and methodical course of action for the analysis and solution of current or future problems. The planning task is defined as an analysis of a problem with the aim to prepare optimal decisions by the use of mathematical methods. The decision problem of a planning task is represented by an optimization model and the application of an efficient algorithm to aid finding one or more solutions to the problem. The basic principle underlying the approach presented herein is the understanding of design in terms of searching for solutions that fulfill specific criteria. This search will be executed by the use of a constraint programming language, which refers to mathematical as well as to integer and mixed integer programming. Examples of architectural layout problems will be presented that can be solved by the use of this programming paradigm. In addition to this, a second programming approach resulting from the domain of resource-allocation has been followed in this research. It will be demonstrated that it is as well possible, to aid architectural layout planning by the use of scheduling algorithms.
series	ASCAAD
email
last changed	2007/11/27 08:22

_id	acadia07_138
id	acadia07_138
authors	Mathew, Anijo Punnen
year	2007
title	Beyond Technology: Efficiency, Aesthetics, and Embodied Experience
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 138-145
doi	https://doi.org/10.52842/conf.acadia.2007.138
summary	The spaces we live in are increasingly entwined in a complex weave of architecture and technology. With the evolution of intelligent devices that work in the background, design of place will eventually be a seamless integration of not just efficient but also experiential and virtual technologies. This signals a paradigm shift because “smart” architecture affords users a new interaction with architecture. In spite of such promises, we have seen interactive architecture ideas and “smart” environments only within laboratory walls or in the form of simplistic implementations. Perhaps the reason is simple. Rachael McCann asks if the integration of technology within the context of an increasingly information-driven modern era has abandoned the body in favor of the mind (McCann 2006). If we acknowledge that “smart” computing has the opportunity to transcend an efficient backbone to generator of experiences, perhaps we, as designers, must reconsider our position and strategy in this modern world. This paper is designed as a critical essay—one which evaluates interactive architecture and “smart” environments within the context of today’s socio-cultural climate. The paper hopes to open a discussion about the role of computing as architecture and the role of the architect in the design of such architecture.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	2006_464
id	2006_464
authors	Mullins, Michael; Tadeja Zupancic, Christian Kühn, Paul Coates and Orhan Kipcak
year	2006
title	V I PA: A virtual campus for virtual space design
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 464-469
doi	https://doi.org/10.52842/conf.ecaade.2006.464
summary	The conceptual design of virtual spaces is creating new places in which to live and work. In consequence, new opportunities for work and employment are opening up for architects as well as for architectural educators. In response to this challenge, VIPA, a transnational virtual campus is currently being developed; it contains an e-learning and research platform for European architectural schools with a focus on virtual space design. The virtual campus integrates administrative, curricular, and communicative infrastructures, interactive, multimedia 3-D contents, and pedagogical considerations in respect of the aims, content and technologies employed. Virtual campuses are already established at most universities in the European Community, yet surprisingly e-learning is not yet widespread in architectural schools in Europe. E-learning is arguably still in an initial research phase; although there are best practice examples where e-learning is already replacing traditional study forms in other teaching disciplines. However, it has been found that although all the universities involved in the VIPA project have been involved in e-learning projects for many years, there is a considerable resistance to e-learning as being equally effective as traditional face-to-face studio teaching. Given the new virtual conditions of space design however, new contexts for learning are increasingly relevant. University curricula have developed out of local competencies, networks of teachers and researchers. These local factors need to be woven into the fabric of a transnational VIPA curriculum and supported with organizational layout, platform, user interfaces and their features. Participants will offer existing courses in virtual space design, as well as developing new ones. This offers the option for both present and future participants to adjust the VIPA courseware to suit local curricula demands, while offering a large range of courses and knowledge. An additional feature of VIPA is thus as a platform for curricula development in virtual space design. The paper reports on the VIPA project’s aims, pedagogical problems, solutions, course content and methods; it will describe prototype results from participating universities and include perspectives on its future application.
keywords	Architectural Education; E-Learning; Virtual Space
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2006_e011c
id	sigradi2006_e011c
authors	Narahara, Taro and Terzidis, Kostas
year	2006
title	Optimal Distribution of Architecture Programs with Multiple-constraint Genetic Algorithm
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 299-303
summary	A genetic algorithm (GA) is a search technique for optimizing or solving a problem based on evolutionary biology, using terms and processes such as genomes, chromosomes, cross-over, mutation, or selection. The evolution starts from a population of completely random individuals and happens in generations. In each generation, the fitness of the whole population is evaluated, multiple individuals are stochastically selected from the current population (based on their fitness), modified (mutated or recombined) to form a new population, which becomes current in the next iteration of the algorithm. In architecture, GAs are of special interest mainly because of their ability to address a problem offering a multiplicity of possible solutions. Contrary to other algorithms where the objective is to accommodate a manually conceived diagram, GAs are emergent procedures that evolve over time through multiple attempt cycles (i.e. generations) and therefore offer a bottom-up approach to design. In addition, by using the computational power of computers they can resolve complex interactions between multiple factors and under multiple constraints offering solutions that occasionally surprise the designer. One of the main problems in architecture today is the quantity of the information and the level of complexity involved in most building projects. As globalization and economic development has started to arise at unprecedented levels, the need for large urban developments have become commonplace. Housing projects for a few hundreds to thousands of people have started to emerge over large urban areas. In such cases, the old paradigm for housing design was the development of high rises that served as stacking devices for multiple family housing units. Such a direction was unfortunately the only way to address excessive complexity using manual design skills mainly because it was simple to conceive but also simple to construct. The unfortunate nature of this approach lies rather in the uniformity, similarity, and invariability that these projects express in comparison to individuality, discreteness, and identity that human beings and families manifest. One of the main areas of complexity that could benefit architecture is in housing projects. In these projects there is a typology of residential units that need to be combined in various schemes that will fulfill multiple functional, environmental, and economic constraints. In this paper, the design of a 200-unit residential complex on a corner of two streets in an urban context was investigated as a case study. Recent advancement in tectonics and structural engineering enables the realization of buildings in mega scales and starts to introduce another layer of complexity into the building programs. Conventional design methods relying on the preconceived knowledge based approaches are no longer reliable. Beyond the certain quantitative factors and the complexity of the problems, search occasionally enters into the unpredictable domain of the human perception. Computational approaches to design allows us to go through thousands of iterations in a second and find the solution sets beyond the reach of designers’ intuitive search spaces. Genetic Algorithm can be a potential derivative for finding optimum design solution from indeterminate search spaces constrained by multi dimensional factors.
keywords	Genetic Algorithm; Housing Design; Multiple-constraint
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2011_p115
id	cf2011_p115
authors	Pohl, Ingrid; Hirschberg Urs
year	2011
title	Sensitive Voxel - A reactive tangible surface
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 525-538.
summary	Haptic and tactile sensations, the active or passive exploration of our built surroundings through our sense of touch, give us a direct feeling and detailed information of space, a sense of architecture (Pallasmaa 2005). This paper presents the prototype of a reactive surface system, which focuses its output on the sense of touch. It explains how touch sensations influence the perception of architecture and discusses potential applications that might arise from such systems in the future. A growing number of projects demonstrate the strong impact of interaction design on the human senses and perception. They offer new ways of sensing and experiencing architectural space. But the majority of these interaction concepts focus on visual and auditory output-effects. The sense of touch is typically used as an input generator, but neglected as as a potential receiver of stimuli. With all the possibilities of sensors and micro-devices available nowadays, there is no longer a technical reason for this. It is possible to explore a much wider range of sense responding projects, to broaden the horizon of sensitive interaction concepts (Bullivant 2006). What if the surfaces of our surroundings can actively change the way it feels to touch them? What if things like walls and furniture get the ability to interactively respond to our touch? What new dimensions of communication and esthetic experience will open up when we conceive of tangibility in this bi-directional way? This paper presents a prototype system aimed at exploring these very questions. The prototype consists of a grid of tangible embedded cells, each one combining three kinds of actuators to produce divergent touch stimuli. All cells can be individually controlled from an interactive computer program. By providing a layering of different combinations and impulse intensities, the grid structure enables altering patterns of actuation. Thus it can be employed to explore a sort of individual touch aesthetic, for which - in order to differentiate it from established types of aesthetic experiences - we have created the term 'Euhaptics' (from the Greek ŒµœÖ = good and Œ¨œÄœÑœâ = touch, finger). The possibility to mix a wide range of actuators leads to blending options of touch stimuli. The sense of touch has an expanded perception- spectrum, which can be exploited by this technically embedded superposition. The juxtaposed arrangement of identical multilayered cell-units offers blending and pattern effects of different touch-stimuli. It reveals an augmented form of interaction with surfaces and interactive material structures. The combination of impulses does not need to be fixed a priori; it can be adjusted during the process of use. Thus the sensation of touch can be made personally unique in its qualities. The application on architectural shapes and surfaces allows the user to feel the sensations in a holistic manner ‚Äì potentially on the entire body. Hence the various dimensions of touch phenomena on the skin can be explored through empirical investigations by the prototype construction. The prototype system presented in the paper is limited in size and resolution, but its functionality suggests various directions of further development. In architectural applications, this new form of overlay may lead to create augmented environments that let inhabitants experience multimodal touch sensations. By interactively controlling the sensual patterns, such environments could get a unique ‚Äútouch‚Äù for every person that inhabit them. But there may be further applications that go beyond the interactive configuration of comfort, possibly opening up new forms of communication for handicapped people or applications in medical and therapeutic fields (Grunwald 2001). The well-known influence of touch- sensations on human psychological processes and moreover their bodily implications suggest that there is a wide scope of beneficial utilisations yet to be investigated.
keywords	Sensitive Voxel- A reactive tangible surface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss2006-pb-373
id	DDSS2006-PB-373
authors	Rohan Bailey
year	2006
title	Towards a Digital Design Teaching Tool - A look at the ideas that should define a digital design primer
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 373-386
summary	Architecture in the 21st century has become an increasingly complex affair. In addition to new social and cultural norms, architects are inundated with constantly changing information regarding new materials, sustainable processes, and complex building types. This state of affairs has also affected the expectations placed on architectural education. Critics (in diverse spheres) have expressed concerns about the lack of requisite skills of graduates that characterise good design thinking strategies as well as promote responsible design. It has been proposed by this author in other forums that by using digital technology to empower design learning, we can allow students to confidently use (through reading and analysis) their sketches to develop conceptual ideas that reconcile disparate elements into a habitable, environmentally friendly and architecturally responsible whole that is fit for purpose, cost effective, sustainable and a delight to clients and users. This paper will seek to discuss one of the concepts that govern such a tool. It will start by delineating the problem (discussed earlier in the abstract) before outlining the concepts or principles that a design teaching tool should adhere to. These concepts acknowledge the importance for the tool to reflect the nature of design tasks, facilitate learning and be accessible to all learning types. The paper will then focus on one concept - the nature of design tasks. The subsequent sections will describe an information structure borne from this idea and make mention of a current prototype of the tool. The paper will conclude with a discussion of the strengths of considering this concept.
keywords	Design & decision support systems, Architectural education, Computer assisted learning, Design thinking
series	DDSS
last changed	2006/08/29 12:55

_id	eaea2005_61
id	eaea2005_61
authors	Stellingwerff, Martijn
year	2006
title	Fabrication of detailed scale models for eye level visualisation
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 61-68
summary	Putting a camera close to a scale-model requires deliberately chosen abstractions and refinements in order to communicate the required architectural insights. Depending on what aspects exactly have to be evaluated (e.g. the visualisation of urban space, building blocks, façade structures, urban furniture, traffic, day and night situations, general atmosphere of a place etc.) different choices can be made for level of detail and materialisation of the scale-models. Specific computer controlled tools can be employed to gain high-precision control over model making. In this conference contribution an overview is provided of possibilities from our newly established Computer-Aided- Modelling-lab (CAM-lab). A selection of applications, made by students and researchers, will be presented. Specific choices can make or break the quality of the final presentation. Insight and knowledge of many available techniques, using the right tools and materials, can bring appropriate scenes before the camera. The input from unbiased and freely experimenting students can give happy surprises and new insights. While looking at the broad range of possibilities, inspired by innovative experiments of students in the workshop we work towards a set of best practices. Especially the integration of different digital and traditional techniques remains interesting.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	ddss2006-hb-341
id	DDSS2006-HB-341
authors	Usama El Fiky and Mark Cox
year	2006
title	Culturally Accepted Green Architecture Toolbox - Pre-design helping tool and rating system for new built environment in Egypt
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 341-356
summary	This paper describes and analyses the process of developing computer software to incorporate both green architecture design strategies and their cultural indicators in one easy tool to help a designer to match his / her design with green architectural principles in the pre-design stage. The three resources of architectural identity in Egyptian, current and past green building practices with the up to date foreign knowledge of green architecture were combined in one toolbox with their building cultural indicators in Egypt. Using the toolbox in primary design stage helps the designer by providing more information about each green design strategy, how to use it effectively. Finally, the toolbox provides indicators about how much the whole project will be accepted in Egyptian society and to what extend it applies green architectural principles. For verification reason, the toolbox was tested with two groups of students in Egypt and The Netherlands as well as professional architects from both countries.
keywords	Software program, Building culture, Green architecture
series	DDSS
last changed	2006/08/29 12:55

_id	2006_818
id	2006_818
authors	Angulo, Antonieta
year	2006
title	Communication in the Implementation of a Metacognitive Strategy for Learning to Design
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 818-825
doi	https://doi.org/10.52842/conf.ecaade.2006.818
summary	This paper describes an instructional communication strategy that makes use of time-based media techniques (story boarding and animation) in order to empower design studios with means to promote their students’ awareness on the acquisition of metacognitive knowledge and skills. This paper highlights the importance of including the communication of the design processes in the evaluation of learning outcomes. Moreover, the paper proposes that the students should be made constantly aware of their design processes and how effective are the methods they use. It is in this state of awareness that metacognitive knowledge is acquired: knowing how to learn to design. We can cultivate, exploit and enhance the capabilities of design learners, making them more confident and independent as learners as they understand what they need to know and what kind of strategies might work for different design problems and learning opportunities. In the development of an instructional strategy to accomplish this learning goal, the paper proposes it may be possible and potentially beneficial to transfer current metacognitive support strategies from a course on computer visualization techniques to the design studios. The paper elaborates on how these communication strategies could be transferred and implemented in a design studio setting. The results of a recent controlled experiment and considerations about the cognitive style of design students will be used in the preparation of recommendations for future full scale implementations in early design studios.
keywords	Design learning; metacognitive learning strategy; time-based media
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: