Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2006-pb-313
id	DDSS2006-PB-313
authors	Jakob Beetz, Jos van Leeuwen, and Bauke de Vries
year	2006
title	Distributed Collaboration in the Context of the Semantic Web
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 313-323
summary	In this paper we are proposing a Multi Agent System (MAS) framework for the facilitation of distributed collaboration in the AEC/FM domain. We are showing how the stack of technologies developed in the Semantic Web community can be put to use for the specific requirements of the building industry. Based on our earlier findings and developments in the area of logic based knowledge representations for the Design and Construction industry, we are outlining how these can form the semantic foundations of internal agent representations and their interconnection using speech acts.
keywords	Collaborative design, Multi-agent systems, Semantic Web
series	DDSS
last changed	2006/08/29 12:55

_id	acadia19_278
id	acadia19_278
authors	Ca?izares, Galo
year	2019
title	Digital Suprematism
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 278-287
doi	https://doi.org/10.52842/conf.acadia.2019.278
summary	It is widely held that sometime around 2006, the World Wide Web as we knew it mutated into Web 2.0. This colloquial label signaled a shift from an Internet designed for us to an Internet designed by us. Nowhere was this more explicitly stated than in Time Magazine’s 2006 Person of the Year selection: You. More than a decade later, Internet browsers have evolved into ubiquitous interfaces accessible from mobile devices, tablet computers, public kiosks, workstations, laptops, etc. It would, therefore, not be an overstatement to say that the browser is the most widespread content canvas in the world. Designers frequently use web browsers for their ability to exhibit and organize content. They are the sites for portfolios, announcements, magazines, and at times, discussions. But despite its flexibility and rich infrastructure, rarely is the browser used to generate design elements. Thanks to advanced web development languages like JavaScript and open-source code libraries, such as p5.JS, Matter.JS, and Three.JS, browsers now support interactive and spatial content. Typically, these tools are used to generate gimmicks or visual effects, such as the parallax illusion or the infinite scroll. But if we perceive the browser as a timebased picture plane, we can immediately recognize its architectonic potential. This paper puts forth a method for engaging the creative potential of web-based media and Internet browsers. Through example projects, I argue that the Internet browser is a highly complex spatial plane that warrants more architectural analysis and experimentation.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia06_148
id	acadia06_148
authors	Cabrinha, Mark
year	2006
title	Synthetic Pedagogy
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 148-149
doi	https://doi.org/10.52842/conf.acadia.2006.148
summary	As tools, techniques, and technologies expand design practice, there is likewise an innovation in design teaching shifting technology from a means of production and representation to a means of discovery and development. This has implications on studio culture and design pedagogy. Expanding the skills based notion of digital design from know-how, or know-how-to-do, toward know-for, or knowledge-for-action, forms a synthetic relationship between the skills necessary for action and the developing motivations of a young designer. This shifts digital design pedagogy to a medium of active inquiry through play and precision. As digital tools and infrastructure are now ubiquitous in most schools, including the increasing digital material exchange enabled through laser cutters, CNC routers, and rapid prototyping, this topic node presents research papers that engage technology not simply as tools to be taught, but as cognitive technologies which motivate and structure a design students knowledge, both tacit and explicit, in developing a digital and material, ecological and social synthetic environment. Digital fabrication, the Building Information Model, and parametric modeling have currency in architectural education today yet, beyond the instrumentality of teaching the tool, seldom is it questioned what the deeper motivations these technologies suggest. Each of these tools in their own way form a synthesis between representational artifacts and the technological impact on process weaving a wider web of materials, collaboration among peers and consultants, and engagement of the environment that the products of design are situated in.If it is true that this synthetic environment enabled by tools, techniques, and technologies moves from a representational model to a process model of design, the engagement of these tools in the design process is of critical importance in design education. What is the relationship between representation, simulation, and physical material in a digitally mediated design education? At the core of synthetic pedagogies is an underlying principle to form relationships of teaching architecture through digital tools, rather than simply teaching the tools themselves. What principles are taught through teaching with these tools, and furthermore, what new principles might these tools develop?
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddss2006-hb-251
id	DDSS2006-HB-251
authors	E.W.T.M. Heurkens
year	2006
title	Decision-Making on Olympic Urban Development - A multi-actor decision support tool
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 251-262
summary	Subject of study is the possible organisation of the Olympic Games of 2028 in the Netherlands, as seen from an urban development viewpoint. The project focuses on the decision-making process in the initiative phase. Aim of the project is the development of a decision support tool for the complex, interdisciplinary decision-making process which should result in an optimum interorganisational design. The methodology used to find the optimum choice is the combination of sub-solutions. Preference Measurement modelling based on a multi-criteria decision analysis is the technique employed. The group decision is a choice out of a number of Olympic urban development combinations, which is made in such a way that the preferred combination is the 'best' among the possible candidates for all relevant stakeholders.
keywords	Combination of sub-solutions, Group decision-making, Olympic urban development, Optimum interorganisational design, Preference measurement modelling
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2006-hb-433
id	DDSS2006-HB-433
authors	Eric Landreneau, Ozan O. Ozener, Burak Pak, Ergun Akleman, and John Keyser
year	2006
title	Interactive Rule-Based Design - An experimental interface for conceptual design
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 433-446
summary	In this paper, we present a method that allows designers to interactively create partially self-similar manifold surfaces without relying on shape grammars or fractal methods. The modellers that are based on traditional fractal methods or shape grammars usually create disconnected surfaces and restrict the creative freedom of users. In most cases, the shapes through conventional fractal or shape grammar methods are defined by hard coded schemes that allow limited interactivity for the design process. We present a new approach for modelling such shapes. With this approach, we have developed a simple generative tool with given adjustable parameters to achieve variety of conceptual forms. Using this tool, designers can interactively create a variety of partially self-similar manifold surfaces.
keywords	Fractal geometry, Conceptual design, Generative systems
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2006-hb-447
id	DDSS2006-HB-447
authors	G. Arthaud and J.C. Lombardo
year	2006
title	Automatic Semantic Comparison of STEP Product Models - Application to IFC product models
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 447-463
summary	This paper introduces an original method to compare IFC models and more generally any STEP models. Unlike common 'diff-like' tools which compare textual files by proceeding line against line, our approach compares actual graphs created from STEP-files. Therefore added, removed, and changed objects can be tracked between two versions of the model. Besides, this standalone tool does not need any heavy database to work so it is fully adapted to design methods of construction projects, where actors are free to modify a local version of their project without any dependence on the database. Moreover it is reusable for other industrial fields thanks to its compatibility with any STEP model. This tool is a part from a more global project which tends to improve accessibility and sustainability of IFC therefore it can be used as a support for VR based design tools.
keywords	Industry Foundation Classes (IFC), STEP models, EXPRESS language, Semantic comparison, Design process
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2006-hb-151
id	DDSS2006-HB-151
authors	Jean-Marie Boussier, P. Estraillier, D. Sarramia, and M. Augeraud
year	2006
title	Approach to Design Behavioural Models for Traffic Network Users - Choice of transport mode
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 151-166
summary	Our research work concerns the development of a multimodal urban traffic simulator designed to be a tool of decision-making aid similar to a game wherein the user-player can test different scenarios by immersion in a 3D virtual city. Our approach is based on the activity-based model and the multi-agent technology. The implemented result is a hybrid simulator connecting numerical simulation and behavioural aspects coming from real data. This paper is focused on two points: firstly, we introduce how a final user (the traffic regulator) instantiates and assembles components so as to model a city and its urban traffic network; secondly, we present the use of Dempster-Shafer theory in the context of discrete choice modelling. Our approach manipulates input variables in order to test realistic representations of behaviours of agent categories in a decision-making process. The traffic modelling is based on a questionnaire elaborated from standard arrays of Taguchi. The significant variables and interactions are determined with the analysis of variance which suggests a reduced model describing the behaviour of a particular social category. The belief theory is used to take into account the doubt of some respondents as well as for the preferences redistribution if the number of alternatives changes. The effects of external traffic conditions are also quantified to choose a 'robust' alternative and to use the agents' memory.
keywords	Urban traffic simulator, Virtual city, Multi-agent system, Behavioural model, Transport mean, Taguchi's method, Belief theory
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2006-pb-271
id	DDSS2006-PB-271
authors	Ji-Hyun Lee and Huai-Wei Liu
year	2006
title	The Art of Communication: a Collaborative Decision-Making System among Different Industrial Design Stakeholders - The case of the company ASUS
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 271-288
summary	Collaboration benefits the process of complex design. However, there are many communication problems among different stakeholders in the domain of industrial design, because the situation of communication and decision-makings for stakeholders is so complicated. To deal with the complexity requires both a web-based collaborative system to communicate and share information immediately, and a multi-agent system (MAS) integrated with KW architecture to possess different levels of competence at performing a particular task. The goal of our system is to integrate a variety of representational methods of transferring knowledge and to communicate among different stakeholders using a single platform. To demonstrate our proposed concepts, we focus on a prototype system for notebook design for the company ASUS, a leading notebook manufacturer based in Taiwan.
keywords	Web-based collaborative system, Computer-supported cooperative work, Decision-making, Multi-agent system, Knowledge warehouse
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2006-hb-309
id	DDSS2006-HB-309
authors	John S. Gero and Udo Kannengiesser
year	2006
title	A Framework for Situated Design Optimization
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 309-324
summary	This paper presents a framework for situated design optimization that expands the traditional view of design optimization. It is based on the notion of interaction providing the potential for modifications of various aspects of the optimization process: problem formulation, the optimization tool, the designer and ultimately the result. In contrast to other approaches, these modifications can drive further interactions within the same optimization process. We use parts of the situated function-behaviour-structure (FBS) framework as an ontological basis to describe the effects of intertwined interactions and modifications on the state space of ongoing optimization processes.
keywords	Design optimization, Situatedness
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2006_081
id	caadria2006_081
authors	JÖRG RÜGEMER
year	2006
title	WEB BASED DESIGN AND COMMUNICATION PEDAGOGY : Group pedagogy and the implementation of web-based technologies within the design process
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 81-90
doi	https://doi.org/10.52842/conf.caadria.2006.x.p2s
summary	The success of the international Zollhof project in Düsseldorf, Germany, in which virtual communication played a crucial role, was the catalyst for introducing interdisciplinary digital methods in the field of teaching. The firm of Frank O. Gehry and Associates, Santa Monica, California, served as an initial field of experimentation in order to bring together a heterogeneous group of project partners to participate in the design and construction phases of the Zollhof project. The design development, construction document, and construction phase was considerably enhanced by the employment of digital media as a communication and information tool. Parallel to the design process in the office in Santa Monica, a line of information flow and management had to be established to connect the local design team with consultants that were located in Europe and specifically in Germany. This line of communication required the team to send precise descriptions of project steps to the participants abroad, as well as receiving and processing a flow of responses returning to the Santa Monica office in very short intervals. By advancing and documenting each design and development step, the project progression was clearly documented by the project teams and thus understandable to everybody involved. The process demanded a highly articulated project description in text and images that were refined and exchanged daily. This helped to strengthen the cooperation between the design team and the project consultants and started to dissolve the role of the prime architect or designer toward a more team-related and democratic structure. All participants had quick access to all necessary information, which set aside the vertical hierarchy in favor of transparent communication tools and platforms.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia06_079
id	acadia06_079
authors	Kumar, Shilpi
year	2006
title	Architecture and Industrial Design A Convergent Process for Design
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 79-94
doi	https://doi.org/10.52842/conf.acadia.2006.079
summary	The use of technology has grown with the way design professions have evolved over time. Changing needs, desires of comfort, and perceptions of the consumers have led to a distinct improvement in the design of both product and architecture. The use of the digital media and emerging technologies has brought a dramatic change to the design process allowing us to view, feel, and mould a virtual object at every stage of design, development, and engineering. Change is often quick and easy since a virtual product does not inherently carry the biases of its physical counterpart. In order to communicate ideas across the team, digital processes are also used to bring together opinions, experiences, and perspectives. These methods encourage decision making based on information rather than prejudice or instinct. Thus, digital exchanges (technology) impact firm strategies at three levels: product, process, and administrative or support activities (Adler 1989).Digital tools for design exchange in Industrial Design (ID) began much earlier than many other professions. The profession of Architecture is also slowly moving to a similar model with digital exchange finding increasing prevalence in drawing, modeling, performance simulation, design collaboration, construction management, and building fabrication. The biggest problem is the disintegrated use of technology in the architectural profession without a strategy toward streamlining the design process from conception to fabrication. In this paper we investigate how the use of technology has evolved in the professions of Industrial Design and Architecture comparatively in their product, process, and support activities. Further, we will present a set of guidelines that will help architects in the convergence of design process, helping in a more efficient work flow with a strategic use of digital technology.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ddss2006-pb-3
id	DDSS2006-PB-3
authors	Massimiliano Petri, Alessandra Lapucci, Diana Poletti, and Silvana Lombardo
year	2006
title	An Internet Survey for an Activity-Based Model - An urban transportation analysis integrated in a G.I.S. environment
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 3-17
summary	The current research deals with the development of an Activity-Based Multi Agent System fully implemented in a G.I.S. framework and applied to the case study of the historical centre of Pisa. The objective is to create a simulation tool for Pisa population transfers in order to verify how transport demand varies because of interventions on traffic plan (e.g. creating urban areas subject to a toll access for vehicles), or on public transport lines, or on new activities location (e.g. supermarkets, public services etc.). Three different parts of the System have been simultaneously carried out: the first concerns a population sample survey, the second deals with geographical data structuring and the last one, still in elaboration progress, tests the model reliability to estract and implement behavioural rules. The results obtained till now show how the Database itself, containing temporal data about agents activities (extracted by the population sample questionnaire) and urban services the city offers, already represents an important instrument to support decision making process.
keywords	Activity-Based Model, G.I.S., Network Analysis, Decision Trees
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2006_125
id	caadria2006_125
authors	NORIHIRO KAWASUMI, ARISA OOBA, YONG SUN
year	2006
title	DEVELOPING DESIGN ARCHIVE AND VISUAL NAVIGATION INTERFACE FOR DIGITAL ENVIRONMENT
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 125-132
doi	https://doi.org/10.52842/conf.caadria.2006.x.e2k
summary	The digital media is most convenient technologies to realize collaborative design environment on the world wide network. A lot of practical Virtual Design Studio projects have been already executed in the world and lots of researchers try to develop more efficient web-based design systems for Virtual Design Studio. On these systems, the digital bulletin board is generally used to support for group discussion and exchanging design proposals via the network. But it is only possible to store and refer design proposals on the web. Its interface and operation are not well-optimized for architectural design activities. Then we consider that it’s necessary to develop the design information archive and visual interface to support digital design activities. The APEX and VPB system is the integrated design environment and we report the results of our experimental design studio using with it.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	sigradi2006_e034d
id	sigradi2006_e034d
authors	Ryan, Rachel and Donn, Michael
year	2006
title	A 3D, interactive, multilayered, web-enabled model as a tool for multiple sets of end user groups: A case study and end user analysis
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 392-396
summary	This research undertakes a case study involving focus groups of potential end users, to identify how a successful digital tool could be created using new and emerging technologies, to accommodate the multiple needs of these end users. 2005 saw the completion of a research paper, which proposed that a single, 3 dimensional digital model of a city forming a core for many different information systems, is a better approach to the needs of the city than many individual models optimised for each information system. The case for the single 3D model was evaluated through the research, development, delivery and analysis of a prototype 3 Dimensional model of Wellington City, New Zealand, presenting different ‘views’ of information in Wellington: a rendered visualisation in an animated “walkthrough”; the impact of planning constraints on daylight; interactive “plots” of property values. The development and delivery of the prototype model was analysed in regards to how complex, costly and time consuming it may be to exploit one base model for several purposes; and also therefore how beneficial, affordable and potentially successful a single model may be. The prototype model was created to test the idea, and therefore provided conclusions based on a limited feasibility analysis - with four potential information layers modelled and two potential delivery methods tested. The prototype model and user analysis results were presented in a research report that suggested further research and development of a single model could be very beneficial: Positive feedback from potential end users and data providers, and examples of potential data mining opportunities forming the basis of the need for continued research. 2006 sees the research continue as an 18 month research project in conjunction with an industry partner, Terralink International, (http://www.terralink.co.nz/). Terralink International Limited provides GIS and mapping solutions which according to their web site: “enable better business management.” The company maintains a national resource of “imagery, cartography, and spatial databases” and provides consultancy services linking these to company databases through GIS systems. The research investigates the potential for 3 dimensional, interactive, multilayered models to enhance delivery of information to multiple end user groups. The research method uses functional prototypes in end-user focus group workshops. These workshops, consisting of a combination of presentations, hands on interactive examples, group discussions, and individual feedback surveys, aim to establish how a tool might best be developed to communicate to a wide range of end users. The means of delivery whether a stand alone tool or web-based is a key element of the user group workshop assessment process. Note: The submission of the prototype tool (via video or interactive media) would greatly increase the effectiveness of the research presentation. Ability to include such media would be greatly appreciated.
keywords	multilayered; 3D; end users; interactive; web-enabled
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	ddss2006-pb-325
id	DDSS2006-PB-325
authors	Sylvain Kubicki, Gilles Halin, and Jean Claude Bignon
year	2006
title	Assistance to Coordination in the AEC Sector - A multi-view interface dedicated to building construction activity
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 325-339
summary	In the Architecture Engineering and Construction (AEC) sector, cooperation between actors is essential for projects success. During the building construction activity, organization is both hierarchical and adhocratic. Decision assistance tools have to integrate these heterogeneous parameters. The proposition described here consists of the design of a coordination assistance tool providing synthetic indicators on the statement of the activity and also allowing the user to navigate in the cooperative context through multiple views. This proposition is based on a model architecture allowing us to manage cooperative context information and its visualization.
keywords	Decision system, Coordination, Building construction, Multi-view interface, Product and process modelling, Human-computer interaction
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2006-hb-35
id	DDSS2006-HB-35
authors	Y. Gohnai, A. Ohgai, S. Ikaruga, T. Kato, K. Hitaka, M. Murakami, and K. Watanabe
year	2006
title	Development of a Support System for Community-Based Disaster Mitigation Planning Integrated with a Fire Spread Simulation Model Using CA - The results of an experimentation for verification of its usefulness
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 35-51
summary	This research carried out an experiment to verify the usefulness of a WebGIS-based system that we have been developing (A support system for community-based disaster mitigation planning integrated with a fire spread simulation model using CA) BEFORE, DURING and AFTER Workshops. Based on the data collected from the experiment, the usefulness and advantages of the system were verified from various angles. As a result, it was found that even though there are still some issues to be solved, the system is useful and effective as a support tool and also in enhancing awareness before and after Workshops.
keywords	Community-based planning for disaster mitigation, Planning support system, Fire spread simulation, Cellular automata, WebGIS
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2006-pb-387
id	DDSS2006-PB-387
authors	Yi-Chia Lee and Yi-Shin Deng
year	2006
title	A Design System Integrating TRIZ Method and Case-Based Reasoning Approach
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 387-402
summary	Today's industrials are facing numerous product development challenges and pressures as a result of an increasingly competitive market. It creates an enormous need for a constantly growing supply of new ideas and solutions. The computer support used by designers still lacks the ability to use experiential knowledge in a rational way. Therefore, pursuit of designer is utilizing innovative design methods and problem-solving approaches to systematically simplify design problem, and hence accelerate the design process. This paper proposed to integrate TRIZ method into CBR process and aims at exploring the possibility to use TRIZ method as a complement to enhance performance of CBR in product design. Wall lighting design problem is used as example, and an interactive CBR system is not only built to provide designers a computational tool to efficiently retrieve usefulness design cases but also assist designers systematically in finding creative ideas.
keywords	TRIZ, Case-based reasoning, Wall light design, Design methods
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2006-hb-467
id	DDSS2006-HB-467
authors	A. Fatah gen. Schieck, A. Penn, V. Kostakos, E. O'Neill, T. Kindberg, D. Stanton Fraser, and T. Jones
year	2006
title	Design Tools for Pervasive Computing in Urban Environments
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 467-486
summary	In this paper we report on ongoing research in which the implications of urban scale pervasive computing (always and everywhere present) are investigated for urban life and urban design in the heritage environment of the city of Bath. We explore a theoretical framework for understanding and designing pervasive systems as an integral part of the urban landscape. We develop a framework based on Hillier's Space Syntax theories and Kostakos' PSP framework which encompasses the analysis of space and spatial patterns, alongside the consideration of personal, social and public interaction spaces to capture the complex relationship between pervasive systems, urban space in general and the impact of the deployment of pervasive systems on people's relationships to heritage and to each other. We describe these methodological issues in detail before giving examples from early studies of the types of result we are beginning to find.
keywords	Urban space, Pervasive systems, Urban computing, Space Syntax, Interaction space
series	DDSS
last changed	2006/08/29 12:55

_id	2006_106
id	2006_106
authors	Achten, Henri
year	2006
title	Feature clusters for online recognition of graphic units in drawings
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 106-112
doi	https://doi.org/10.52842/conf.ecaade.2006.106
summary	Automated recognition of sketch drawings can provide the means for a natural interface between the designer and a design support system. Sketch drawing recognition is knowledge-intensive in the sense that the system must know what to look for in a drawing. In earlier work, we identified 24 different types of representations, termed graphic units. For recognition of graphic units we combine a multi-agent approach and online recognition. Each agent is specialised for one graphic unit. It continuously parses the online input stream for stroke features that fall within its scope. When an agent-specific threshold is reached, the agent puts a claim. Each agent has a specific cluster of features that can be viewed as distributed over a decision tree. The activation pattern of feature clusters over the decision tree is an indication which graphic unit is likely to be identified by the system. In this paper, we present the exhaustive set of features for agents and a binary decision tree over which the features are distributed.
keywords	Image recognition; sketches; graphic units; feature-based modelling
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: