Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 626

Reformat results as: short short into frame detailed detailed into frame

_id	ijac20064106
id	ijac20064106
authors	Kilian, Axel
year	2006
title	Design innovation through constraint modeling
source	International Journal of Architectural Computing vol. 4 - no. 1, 87-105
summary	In this paper we describe how constraint modeling can support design innovation. Furthermore, we lay out how constraints are employed in the construction and exploration of a model's design space. We place the approach within the context of design exploration using computational and conceptual representations of design. A review of the literature reveals that geometric, topologic, functional, and quantitative constraints are those most commonly used. For each constraint type, an example is presented drawing from several workshops and research conducted by the author. The examples range from product design, to structural design, to fabrication issues in freeform geometry. Based on the case studies, we describe how the different types of constraints can be used as design drivers and help in the exploration of solution spaces. In conclusion, we identify the need for bidirectional exercising of constraints as the next challenge in design exploration and discuss how it is relevant in particular for cross domain design.
keywords	Design Exploration; Constraint Modeling; Parametric Modeling
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00007
last changed	2007/03/04 07:08

_id	2006_818
id	2006_818
authors	Angulo, Antonieta
year	2006
title	Communication in the Implementation of a Metacognitive Strategy for Learning to Design
doi	https://doi.org/10.52842/conf.ecaade.2006.818
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 818-825
summary	This paper describes an instructional communication strategy that makes use of time-based media techniques (story boarding and animation) in order to empower design studios with means to promote their students’ awareness on the acquisition of metacognitive knowledge and skills. This paper highlights the importance of including the communication of the design processes in the evaluation of learning outcomes. Moreover, the paper proposes that the students should be made constantly aware of their design processes and how effective are the methods they use. It is in this state of awareness that metacognitive knowledge is acquired: knowing how to learn to design. We can cultivate, exploit and enhance the capabilities of design learners, making them more confident and independent as learners as they understand what they need to know and what kind of strategies might work for different design problems and learning opportunities. In the development of an instructional strategy to accomplish this learning goal, the paper proposes it may be possible and potentially beneficial to transfer current metacognitive support strategies from a course on computer visualization techniques to the design studios. The paper elaborates on how these communication strategies could be transferred and implemented in a design studio setting. The results of a recent controlled experiment and considerations about the cognitive style of design students will be used in the preparation of recommendations for future full scale implementations in early design studios.
keywords	Design learning; metacognitive learning strategy; time-based media
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2006_e165b
id	sigradi2006_e165b
authors	Angulo, Antonieta
year	2006
title	Optimization in the Balance between the Production Effort of E-learning Tutorials and their related Learning Outcome
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 122-126
summary	This paper provides evidence on the level of media richness that may be cost effective in the development of e-learning tutorials for teaching and learning computer visualization techniques. For such a purpose the author provides an analysis of low-cost / high-impact media rich products, the effort and cost required in their development and the measurement of related learning outcomes. Circa twenty years of R&D of multimedia and hypermedia applications for instruction have demonstrated the benefits of communicating relevant information to learners using engaging media. Based on this evidence, this paper assumes that due to the cognitive style of design students, the instructional packages for learning computer techniques for design visualization that are rich in media content, tend to be more effective. Available visualization technologies make the development of e-learning tutorials feasible and apparently the logical way to implement our instructional packages. However the question in the development of e-learning tutorials becomes a more strategic one when we are called to reach a level of optimization between producing a package with a basic standard, namely; text & still-graphic based tutorials, or a state-of-the-art package that is based on video demonstrations (more than enough?) that can accommodate the students’ learning requirements and also our production costs. The costs include the human resources (instructor, producers, assistants and others) and the material resources (hardware and software, copies, and others) involved in the creation of the e-learning tutorials. The key question is: What is good enough, and what is clearly superfluous? In order to confirm our hypothesis and propose a relevant balance between media richness and learning effectiveness, this paper describes an experiment in the use of two different levels of media richness as used to deliver instructions on the production of computer animations for design visualization. The students recruited for this experiment were fairly familiarized with the use of 3D modeling concepts and software, but had no previous knowledge of the techniques included in the tutorials; in specific; camera animation procedures. The students, separated in two groups, used one of the two methods; then they proceeded to apply their newly acquired skills in the production of an animation without using the help of any external means. The assessment of results was based on the quality of the final product and the students’ performance in the recall of the production procedures. Finally an interview with the students was conducted on their perception of what was accomplished from a metacognitive point of view. The results were processed in order to establish comparisons between the different levels of achievement and the students’ metacognitive assessment of learning. These results have helped us to create a clear set of recommendations for the production of e-learning tutorials and their conditions for implementation. The most beneficial characteristics of the two tested methods in relation to type of information, choice of media, method of information delivery, flexibility of production/editorial tools,! and overall cost of production, will be transferred into the development of a more refined product to be tested at larger scale.
keywords	e-learning tutorials; media richness; learning effectiveness; cognitive style; computer visualization techniques
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2006_paper15
id	ascaad2006_paper15
authors	Anz, Craig and Akel Ismail Kahera
year	2006
title	Critical Environmentalism and the Practice of Re-Construction
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This research focuses on the implications and applications of “critical environmentalism” as a quintessential epistemological framework for urban interventions while implementing digital applications that foster collective, round-table approaches to design. Essentially centering the environment (Umwelt) as an encompassing and interconnecting catalyst between multiple disciplines, philosophies, and modes of inquiry and technologies, the framework reciprocally fosters individual and critical identities associated with particular places, belief systems, and their participants as a primary concern. Critical environmentalism promotes a comprehensive, reciprocally unifying epistemological framework that can significantly inform architectural interventions and the tethered use of its technologies in order to foster increased vitality and a certain coinvested attention to the complexities of the greater domain. Grounding the theory in pedagogical practice, this paper documents an approach to urban design and architectural education, implemented as a case-study and design scenario, where divergent perspectives amalgamate into emergent urban configurations, critically rooted in the conditional partialities of place. Digital technologies are incorporated along with analogical methods as tools to integrate multiple perspectives into a single, working plane. Engaging the above framework, the approach fosters a critical (re)construction and on-going, co-vested regeneration of community and the context of place while attempting to dialogically converge multiple urban conditions and modes-of-thought through the co-application of various digital technologies. Critically understanding complex urban situations involves dialogically analyzing, mapping, and modeling a discursive, categorical structure through a common goal and rationale that seeks dialectic synthesis between divergent constructions while forming mutual, catalyzing impetuses between varying facets. In essence, the integration of varying technologies in conjunction, connected to real world scenarios and a guiding epistemic framework cultivates effective cross-pollination of ideas and modes through communicative and participatory interaction. As such it also provides greater ease in crosschecking between a multitude of divergent modes playing upon urban design and community development. Since current digital technologies aid in data collection and the synthesis of information, varying factors can be more easily and collectively identified, analyzed, and then simultaneously used in subsequent design configurations. It inherently fosters the not fully realized potential to collectively overlay or montage complex patterns and thoughts seamlessly and to thus subsequently merge a multitude of corresponding design configurations simultaneously within an ongoing, usable database. As a result, the pedagogical process reveals richly textured sociocultural fabrics and thus produces distinct amplifications in complexity and attentive management of diverse issues, while also generating significant narratives and themes for fostering creative and integrative solutions. As a model for urban community and social development, critical environmentalism is further supported the integrative use of digital technologies as an effective means and management for essential, communicative interchange of knowledge and thus rapprochement between divergent modes-of-thought, promoting critical, productive interaction with others in the (co)constructive processes of our life-space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2006_e048c
id	sigradi2006_e048c
authors	Beck, Mateus Paulo; Brener, Rafael; Giustina, Marcelo and Turkienicz, Benamy
year	2006
title	Light and Form in Design – A Computational Approach
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 254-257
summary	Shape perception is strongly influenced by the reciprocal relation between light and form. Computational applications can increase the number of design alternatives taking into account possible variations in the relation between light and form. The aim of this study is to discuss a pedagogical experience carried out with 5th semester architectural students, based on a series of exercises prior to the term project. The exercises were concerned with the relation between light and form from an aesthetical point of view and should be understood as examples for the use of computers as tools to creatively accelerate the process of design and learning. The paper is divided in five parts. The first one describes the conceptual background for the exercises, a descriptive method for the identification of light effects in architectural objects based on ideas of shape emergence. The exercises’ methodology is explained in the second part, referring to the use of computational applications in 3-dimensional modeling, material and light simulation. The methodology includes different phases: –creation of bi-dimensional compositions according to symmetry operations; –creation of a minimal living space assigning functions to spaces originated from the former composition; –analysis of the impact of light on the form and spaces created; –alteration of form and materials creating new light effects considering the functions related to the spaces. The exercises alternate work in computational environment in two and three dimensions with the use of mockups, lamps and photography. In the third part the results –student’s design steps– are described. In the fourth part the results are analyzed and some conclusions are outlined in the fifth and last part. The use of emergent forms combined with computational tools has proved to be an effective way to achieve an accelerated understanding of the impact of light on forms as demonstrated by the evolution of the students work during the term and by their final results concerning the term project.
keywords	Architectural Design; Lighting; Design Simulation; Virtual Environment
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2006_413
id	caadria2006_413
authors	Bhatt Anand; Martens, Bob
year	2006
title	ON-TO-CAAD: Investigating the Knowledge Contained within the Corpus of CAAD Research
doi	https://doi.org/10.52842/conf.caadria.2006.x.s6g
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 413-424
summary	The work presented here discusses an ongoing research in constructing a knowledge representation system founded on CAAD document repositories and investigating the network of concepts constructed by CAAD research. The approach does not rely on conceptual models or theories about CAAD research, rather a formal semantics amenable to decidable reasoning on the corpus of research in CAAD. A web-based demonstration application is illustrated in the paper in which we discuss two propositions about CAAD research discovered in the process of our investigations.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ascaad2006_paper6
id	ascaad2006_paper6
authors	Biloria, Nimish; Kas Oosterhus, and Cas Aalbers
year	2006
title	Design Informatics: a case based investigation into parametric design scripting and CNC based manufacturing techniques
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for manifesting complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This designresearch approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. A pattern of points attained from this intersection: ‘the point cloud’ serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed scriptroutines, iteratively run calculations to generate steel-wire frames, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct thus enabling timely and effective construction of the conceptualized form.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	acadia06_148
id	acadia06_148
authors	Cabrinha, Mark
year	2006
title	Synthetic Pedagogy
doi	https://doi.org/10.52842/conf.acadia.2006.148
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 148-149
summary	As tools, techniques, and technologies expand design practice, there is likewise an innovation in design teaching shifting technology from a means of production and representation to a means of discovery and development. This has implications on studio culture and design pedagogy. Expanding the skills based notion of digital design from know-how, or know-how-to-do, toward know-for, or knowledge-for-action, forms a synthetic relationship between the skills necessary for action and the developing motivations of a young designer. This shifts digital design pedagogy to a medium of active inquiry through play and precision. As digital tools and infrastructure are now ubiquitous in most schools, including the increasing digital material exchange enabled through laser cutters, CNC routers, and rapid prototyping, this topic node presents research papers that engage technology not simply as tools to be taught, but as cognitive technologies which motivate and structure a design students knowledge, both tacit and explicit, in developing a digital and material, ecological and social synthetic environment. Digital fabrication, the Building Information Model, and parametric modeling have currency in architectural education today yet, beyond the instrumentality of teaching the tool, seldom is it questioned what the deeper motivations these technologies suggest. Each of these tools in their own way form a synthesis between representational artifacts and the technological impact on process weaving a wider web of materials, collaboration among peers and consultants, and engagement of the environment that the products of design are situated in.If it is true that this synthetic environment enabled by tools, techniques, and technologies moves from a representational model to a process model of design, the engagement of these tools in the design process is of critical importance in design education. What is the relationship between representation, simulation, and physical material in a digitally mediated design education? At the core of synthetic pedagogies is an underlying principle to form relationships of teaching architecture through digital tools, rather than simply teaching the tools themselves. What principles are taught through teaching with these tools, and furthermore, what new principles might these tools develop?
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia06_540
id	acadia06_540
authors	Diewald, J., Frederick, M.
year	2006
title	Building Information Modeling: Interactive Versioning Experiment
doi	https://doi.org/10.52842/conf.acadia.2006.540
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 540-541
summary	Interactive Versioning, is the first experiment of an ongoing investigation into the conceptual role of parametric modeling in the design process. In this case, the form is defined by constrained floor-plate relationships. Originally testing methods using numerical values exported to excel, we obtained undesirable results and shifted our focus to the creation of an interactive model; restoring the direct influence of user input. The result is a 10-floor structure that allows the user to tweak point locations along the slab perimeters that in turn have global effect on the overall geometry of the architectural body. We are using four point definition types: reference above, interactive reference, reference below, and independent value. Interactive reference points use referential constraints defined as x and y distances from the global origin, which change on account of user inputs. Reference above points pull (x,y) values from an interactive point above. Reference below points pull (x,y) values from interactive points below. Independent points are unaffected by changes in any of the other points but may also be tweaked to adjust a form. On any given level, there are 2 interactive reference points, 2 reference above points, 2 reference below points, and 4 independent points. Additionally, 2 length constraints link interactive points with reference above points on the same level. This allows for changes to affect the entire structure rather than only the floor plates immediately above and below a given change. The addition of constraints to the floor outlines will yield a variety of formal results and offer the possibility to further control the output.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	7987
id	7987
authors	Dimitrios Makris, Ioannis Havoutis, Georges Miaoulis, Dimitri Plemenos
year	2006
title	MultiCAD – MOGA A System for Conceptual Style Design of Buildings
source	Conference Proceedings of the 9th 3IA (2006) International Conference on Computer Graphics and Artificial Intelligence, p73-84
summary	The synthesis of the three-dimensional morphology of a building is one of the most important tasks in architecture. Space planning and morphology are of the most interesting and complex of architectural design problems. Architectural design is guided by the constraints on the spatial composition and the morphology of the final building. During the conceptual phase problems are characterised by fuzziness and complexity. Building requirements are ill-defined and contradictory. The designer should explore the solution space for alternative building solutions while refining requirements and style preferences. In this paper we present the development and implementation of an Evolutionary Declarative Design system prototype for the aid of conceptual style design of buildings. The system is a specific MultiCAD prototype system including architectural knowledge, architectural style and a multi-objective genetic algorithm. Two design cases are presented for two different architectural styles. The applicability and efficiency of the system prototype are discussed.
keywords	declarative modelling, evolutionary design, multi-objective genetic algorithms, architectural conceptual design, constraints
series	other
type	normal paper
email
more	http://3ia.teiath.gr/3ia_previous_conferences_cds/2006/Papers/Full/Makris_8.pdf
last changed	2007/11/29 15:55

_id	sigradi2006_e172c
id	sigradi2006_e172c
authors	Donath, Dirk and González Böhme, Luis Felipe
year	2006
title	A Constraint-Based Building Bulk Design Support
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 278-282
summary	We introduce an architecture practice-oriented implementation strategy of constraint-based methods called BDS (Building Bulk Design Support) to supporting bulk analysis during the architectural programming phase. We examine the optmization problem of site coverage and building massing according to a set of standard planning and zoning regulations, and try a problem solving approach based on the paradigm of constraint satisfaction problems. The case study, which is focused on the paticipatory planning of very low-income dwellings within the Latin American context, serves as testbed for a prototypical application of the adopted methodology. The BDS constitutes a novel approach on computer-aided bulk analysis, regarding this particularly relevant context of application. In the case of participatively planned low-income housing projects, efficiency regarding time and cost of planning directly affects dwellers’ quality of life, whereas elementary programming tasks such as bulk analysis lack appropriate state-of-the-art technological support. Traditional architectural planning methods demand a large domain-specific knowledge base and skillful planners. A planning process, which is mainly driven by the formulation of planning-relevant constraints and sets of solution alternatives, suggests to avoid architects’ traditional procedure of: 1. Create an (yet not necessarily valid) instance of the eventual design solution by directly choosing specific values for its shape parameters. 2. Evaluate its validity by confronting the designed model to a set of applicable constraints, which have to be satisfied. Instead, the constraint-based design methodology poses a search procedure that operates in a space of pertinent constraint sets. A computer-aided interactive search procedure to find more valid design solution alternatives in less time and with less effort is particularly qualified to supply efficient support for participatory planning activities carried out between dwellers and planners. The set of solutions for a building-bulk design problem is constrained by both a large complex system of planning and zoning regulations and the geometry of the eventual design solution itself. Given a considerable amount of such regulations, a regular size geometric constraint satisfaction system proved to be capable of providing a highly efficient, interactive modeling and evaluation tool for the formulation in real time of valid solution alternatives for an ordinary building-bulk design problem. A BDS implementation will constitute one system module of a larger integrated system model called Esther. A BDS tool shall interact with other functional modules, like e.g. the FLS (Floor plan Layout Support), which also uses constraint-based design methods.
keywords	constraint-based design; bulk analysis; participatory planning; low-income housing; design theory; design proces
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia06_392
id	acadia06_392
authors	Dorta, T., Perez, E.
year	2006
title	Hybrid modeling revaluing manual action for 3D modeling
doi	https://doi.org/10.52842/conf.acadia.2006.392
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 392-402
summary	3D modeling software uses conventional interface devices like mouse, keyboard and display allowing the designer to model 3D shapes. Due to the complexity of 3D shape data structures, these programs work through a geometrical system and a graphical user interface to input and output data. However, these elements interfere with the conceptual stage of the design process because the software is always asking to be fed with accurate geometries—something hard to do at the beginning of the process. Furthermore, the interface does not recognize all the advantages and skills of the designer’s bare hands as a powerful modeling tool.This paper presents the evaluation of a hybrid modeling technique for conceptual design. The hybrid modeling approach proposes to use both computer and manual tools for 3D modeling at the beginning of the design process. Using 3D scanning and rapid prototyping techniques, the designer is able to go back and forth between digital and manual mode, thus taking advantage of each one. Starting from physical models, the design is then digitalized in order to be treated with special modeling software. Then, the rapid prototyping physical model becomes a matrix or physical 3D template used to explore design intentions with the hands, allowing the proposal of complex shapes, which is difficult to achieve by 3D modeling software alone.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	acadia06_251
id	acadia06_251
authors	d’Estrée Sterk, Tristan
year	2006
title	Shape Change in Responsive Architectural Structures: Current Reasons & Challenge
doi	https://doi.org/10.52842/conf.acadia.2006.251
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 251-260
summary	Shape control within architectural structures is a natural extension to the practice of engineering and architectural design. The knowledge needed for it’s development builds upon two well understood foundations: 1) the long existing knowledge that building performance and function are intimately connected to the shape of built spaces; and 2) the relatively new idea that embedded computational systems may be employed to control devices in useful and beautiful ways. When combined, each type of knowledge can be used to further architecture and engineering at both theoretical and methodological levels. Structural shape control is of major interest within architecture because it is the primary ingredient needed to produce building envelopes that change shape. Structural shape control also currently represents a major technological and methodological stumbling block for architects, posing many challenges that have theoretical and practical origins. Theoretically, responsive architectural structures demand a re-evaluation of existing notions of space making. Practically, these systems demand a re-evaluation of construction and design methodologies across both engineering and architectural practice.
series	ACADIA
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

_id	ddss2006-hb-203
id	DDSS2006-HB-203
authors	Gerhard Zimmermann
year	2006
title	Multi-Agent Model to Multi-Process Transformation - A housing market case study
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 203-219
summary	Simulation is a means to help urban planners and investors to optimize inhabitant satisfaction and return on investment. An example is the optimal match between household preferences and property profiles. The problem is that not enough knowledge exists yet about dynamic user activity models to build reliable and realistic simulators. Therefore, we propose a modeling and software technique that produces simulator prototypes very efficiently for the development, test, and evaluation of many different user activity models, using executable models, code generation, and a domain specific software process. As a specific feature, the model is based on many agents acting independently from each other and that are mapped in several refinement steps into the same number of concurrent processes. The housing example is used as a case study to explain the process and show performance results.
keywords	Agent technology, User activity modeling, User activity simulation, Software engineering, Code generation, Software process
series	DDSS
last changed	2006/08/29 12:55

_id	ascaad2006_paper18
id	ascaad2006_paper18
authors	Huang, Chie-Chieh
year	2006
title	An Approach to 3D Conceptual Modelling
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This article presents a 3D user interface required by the development of conceptual modeling. This 3D user interface provides a new structure for solving the problems of difficult interface operations and complicated commands due to the application of CAD 2D interface for controlling 3D environment. The 3D user interface integrates the controlling actions of “seeing – moving –seeing” while designers are operating CAD (Schön and Wiggins, 1992). Simple gestures are used to control the operations instead. The interface also provides a spatial positioning method which helps designers to eliminate the commands of converting a coordinate axis. The study aims to discuss the provision of more intuitively interactive control through CAD so as to fulfil the needs of designers. In our practices and experiments, a pair of LED gloves equipped with two CCD cameras for capturing is used to sense the motions of hands and positions in 3D. In addition, circuit design is applied to convert the motions of hands including selecting, browsing, zoom in / zoom out and rotating to LED switches in different colours so as to identify images.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	eaea2005_39
id	eaea2005_39
authors	Kardos, Peter
year	2006
title	The visual context of architectural and urban design processes
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 39-47
summary	When designing, an architect in his imagination generates images, topics and drafts in various combinations. He is supported by his imagination, experience, know - how and ideological creative intentions. He is driven by the need to externally transmit, illustrate or explain his visualizations. The basis of the external communication is on one side the figurative interpretation of spatial manifestation of the conceptual suggestion and on the other hand the vision, perception or experience of the given solution projection by eyes of participants to the visual presentation. The above-mentioned process of verification or consensual examination is a principal requirement for creative progressing in finding solutions to an architectural problem. In the process of architectural education this phenomenon in studio conditions becomes a platform for students to gather professional experience in practical application of theoretical knowledge and in iterative verification of predication value quality of architectural or urbanistic proposal itself.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	ascaad2006_paper22
id	ascaad2006_paper22
authors	Lonnman, Bruce
year	2006
title	Structural Performance Modelling in Architectural Design Education
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	In architectural education the process of design has evolved with the development of CAD technology. In many design schools throughout the world, the computer has extended its role beyond that of a drafting machine to become a tool for performance modeling. Applications currently used by students test lighting, thermal conditions, and structural validity, to name a few. However the goals in education are not identical to those in practice, and digital modeling can support learning in many ways that are not particularly useful or appropriate in professional practice. In the design of structures there are three fundamental levels of understanding: behavior, form, and performance. Each has its place in design education and uses digital modeling in different forms. This paper describes various pedagogical models that incorporate computer aided drawing and performance modeling in the teaching of structures. Examples of student exercises and projects are discussed.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2006_c038a
id	sigradi2006_c038a
authors	Monedero, Javier
year	2006
title	Autoaprendizaje, integración transversal y diseño 3D [Self learning, transversal integration and 3D design]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 80-83
summary	The paper begins with some considerations about the historical evolution of parametric design methods in the advanced industry and their forecoming transference to the field of architecture. Following these considerations it is maintained that this transference will bring about a second revolution in the educational methodologies, more important than the first one, and that this will result in a clearer separation between conceptual knowledge and instrumental knowledge. The need to give a proper place to a growing sector of information and mechanical methods of learning in the academic world should lead to a an adequate integration of computer aided instruction, a broader collaboration between different departments and to e-learning methods established on a regular basis. In this context, an outline of a new experience of this kind, that will start next term in our school, is presented.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	2006_464
id	2006_464
authors	Mullins, Michael; Tadeja Zupancic, Christian Kühn, Paul Coates and Orhan Kipcak
year	2006
title	V I PA: A virtual campus for virtual space design
doi	https://doi.org/10.52842/conf.ecaade.2006.464
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 464-469
summary	The conceptual design of virtual spaces is creating new places in which to live and work. In consequence, new opportunities for work and employment are opening up for architects as well as for architectural educators. In response to this challenge, VIPA, a transnational virtual campus is currently being developed; it contains an e-learning and research platform for European architectural schools with a focus on virtual space design. The virtual campus integrates administrative, curricular, and communicative infrastructures, interactive, multimedia 3-D contents, and pedagogical considerations in respect of the aims, content and technologies employed. Virtual campuses are already established at most universities in the European Community, yet surprisingly e-learning is not yet widespread in architectural schools in Europe. E-learning is arguably still in an initial research phase; although there are best practice examples where e-learning is already replacing traditional study forms in other teaching disciplines. However, it has been found that although all the universities involved in the VIPA project have been involved in e-learning projects for many years, there is a considerable resistance to e-learning as being equally effective as traditional face-to-face studio teaching. Given the new virtual conditions of space design however, new contexts for learning are increasingly relevant. University curricula have developed out of local competencies, networks of teachers and researchers. These local factors need to be woven into the fabric of a transnational VIPA curriculum and supported with organizational layout, platform, user interfaces and their features. Participants will offer existing courses in virtual space design, as well as developing new ones. This offers the option for both present and future participants to adjust the VIPA courseware to suit local curricula demands, while offering a large range of courses and knowledge. An additional feature of VIPA is thus as a platform for curricula development in virtual space design. The paper reports on the VIPA project’s aims, pedagogical problems, solutions, course content and methods; it will describe prototype results from participating universities and include perspectives on its future application.
keywords	Architectural Education; E-Learning; Virtual Space
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2006_237
id	caadria2006_237
authors	N.BILORIA, K.OOSTERHUIS, C. AALBERS
year	2006
title	DESIGN INFORMATICS: (A case based investigation into parametric design, scripting and CNC based manufacturing techniques)
doi	https://doi.org/10.52842/conf.caadria.2006.x.q9e
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 237-244
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for envisaging complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This design-research approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. The hence extorted ‘point cloud’ configuration serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed script-routines, iteratively run calculations to generate steel-wire frames, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct hence enabling timely and effective construction of the conceptualized form.
series	CAADRIA
email
last changed	2022/06/07 07:49

For more results click below: