Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2006_paper25
id	ascaad2006_paper25
authors	Artopoulos, Giorgos; Stanislav Roudavski and Francois Penz
year	2006
title	Adaptive Generative Patterns: design and construction of Prague Biennale pavilion
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This paper describes an experimental practice-based research project that considered design process, implementation and construction of a pavilion built to be part of the Performative Space section of the International Biennale of Contemporary Art, Prague 2005. The project was conceptualized as a time-bound performative situation with a parasite-like relationship to its host environment. Its design has emerged through an innovative iterative process that utilized digital simulative and procedural techniques and was formed in response to place-specific behavioral challenges. This paper presents the project as an in-depth case-study of digital methods in design, mass customization and unified methods of production. In particular, it considers the use of Voronoi patterns for production of structural elements providing detail on programming and construction techniques in relationship to design aspirations and practical constraints.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2006_paper6
id	ascaad2006_paper6
authors	Biloria, Nimish; Kas Oosterhus, and Cas Aalbers
year	2006
title	Design Informatics: a case based investigation into parametric design scripting and CNC based manufacturing techniques
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for manifesting complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This designresearch approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. A pattern of points attained from this intersection: ‘the point cloud’ serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed scriptroutines, iteratively run calculations to generate steel-wire frames, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct thus enabling timely and effective construction of the conceptualized form.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	caadria2006_601
id	caadria2006_601
authors	BINSU CHIANG, MAO-LIN CHIU
year	2006
title	PRIVATE/UN-PRIVATE SPACE: Scenario-based Digital Design for Enhancing User Awareness
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 601-603
doi	https://doi.org/10.52842/conf.caadria.2006.x.s8b
summary	Context awareness is important for human senses of places as well as human computer interaction. The aim of this research paper is focusing on controlling the user's privacy in a smart space which is adaptive to different users for enhancing the user's awareness in his diary life. In Environmental Psychology, the definition of privacy is that an individual has the control of deciding what information of himself is released to others, and under how he interact with others. (Westin 1970) And privacy is categorized as the linguistic privacy and visual privacy. (Sundstorm 1986). Solutions for privacy control: Plan Layout, Vision Boundary, Access Control and Architecture Metaphor - the transmission of information is not ascertainable for every single user. Although information are shown in public, but information is implied by cues and symbols. Only a certain user or a group of users have access to the full context of information. The methodology is to form an analytic framework to study the relationship between information, user and activities by using the computational supports derived from KitchenSense, ConceptNet, Python, 3d Studio Max and Flash; and to record patterns built up by users' behaviour and actions. Furthermore, the scenario-based simulation can envision the real world conditions by adding interfaces for enhancing user awareness.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2006_237
id	caadria2006_237
authors	N.BILORIA, K.OOSTERHUIS, C. AALBERS
year	2006
title	DESIGN INFORMATICS: (A case based investigation into parametric design, scripting and CNC based manufacturing techniques)
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 237-244
doi	https://doi.org/10.52842/conf.caadria.2006.x.q9e
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for envisaging complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This design-research approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. The hence extorted ‘point cloud’ configuration serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed script-routines, iteratively run calculations to generate steel-wire frames, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct hence enabling timely and effective construction of the conceptualized form.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	2006_794
id	2006_794
authors	Nir, Eyal and Guedi Capeluto
year	2006
title	On Design Continuity with Smart Cloud of Points
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 794-797
doi	https://doi.org/10.52842/conf.ecaade.2006.794
summary	The continuity of the design process is not well supported by the widespread available CAD systems that mainly focus on specific design stages overlooking the transition between them, where some of the design information is lost or duplicated. The growing use of complex geometries in architectural design projects led to the adoption of constraint-based parametric modeling techniques in the construction industry. Applying these techniques and tools requires rationalizing the design solution and fixing its geometry at an early design stage. When done prematurely, it can result in design fixation and restrain the design creativity, putting it within constraints. In this paper we explore the use of Smart Cloud of Points (SmCP) as an adaptive design media supporting the continuity of the design process.
keywords	Parametric Design: point-clouds; performance driven design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ijac20064307
id	ijac20064307
authors	Goldberg, Sergio Araya
year	2006
title	Computational Design of Parametric Scripts for Digital Fabrication of Curved Structures
source	International Journal of Architectural Computing vol. 4 - no. 3, 99-117
summary	This paper explores strategies for building toolchains to design, develop and fabricate architectural designs. It explains how complex curved structures can be constructed from flat standard panels. The hypothesis of this research is that by embedding ruled based procedures addressing generative, variational, iterative, and fabricational logics into early phases of design, both design techniques and digital fabrication methods can merge to solve a recurrent problem in contemporary architectural design, building double curved structures. Furthermore it achieves this using common fabrication methods and standard construction materials. It describes the processes of programming computational tools creating and developing designs to fabricate continuous complex curved structures. I describe this through a series of experiments, using parametric design environments and scripted functions, implementing certain techniques to fabricate these designs using rapid prototyping machines. Comparing different design and fabrication approaches I offer a discussion about universal application of programmed procedures into architectural design.
series	journal
last changed	2007/03/04 07:08

_id	sigradi2006_e171c
id	sigradi2006_e171c
authors	González Böhme, Luis Felipe and Vargas Cárdenas, Bernardo
year	2006
title	Foundations for a Constraint-Based Floor Plan Layout Support in Participatory Planning of Low-Income Housing
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 283-287
summary	We introduce the foundations of a novel approach that deals with constraint-based design methods to supporting participatory planning processes of low-income dwellings. We examine the space allocation problem inside the architectural domain on the basis of graph theory and combinatorics, providing a concise mathematical background for an implementation strategy called FLS (Floor plan Layout Support), which is analyzed here for the first time regarding this particular context of application. The philosophy underlying a design method that is mainly driven by the formulation of distinct constraints suggests to avoid the traditional procedure of first to create a yet not necessarily valid instance of the eventual design solution by directly choosing specific parameter values of its shape, and later on to evaluate its validity by confronting the designed model to a set of applicable constraints. Instead, constraint-based design poses a search procedure that operates in a space of planning-relevant constraint sets. The FLS methodology integrates some few principles of constraint-based automated reasoning with high user interactivity, into a design environment where as much dwellers as planners can collaboratively work in solving spatial organization problems of housing projects. The FLS model of application makes use of a combination of dweller-specified constraints, planning and zoning regulations, and a small library of modular space units. Constraint-based design ! methods are particularly capable of supplying efficient support for the collaborative involvement of dwellers into the architectural programming process of her/his own home. Mainly, because dwellers themselves tend to describe their space need and design intentions as a set of constraints on room quantity, space utilization, circulation system, allocation of available furniture, available budget, construction time, and so forth. The goal is to achieve an integrated tool for finding and modelling topologically valid solutions for floor plan layout alternatives, by combining user-driven interactive procedures with automatic search and generative processes. Thus, several design alternatives can be explored in less time and with less effort than using mainstream procedures of architectural practice. A FLS implementation will constitute one system module of a larger integrated system model called Esther. A FLS tool shall interact with other functional modules, like e.g. the BDS (Building Bulk Design Support), which also uses constraint-based design methods. A preliminary procedural model for the FLS was tested on Chile’s official social housing standards (Chilean Building Code – OGUC. Art. 6.4.1) which are very similar to most Latin American housing programs currently in operation.
keywords	constraint-based design; floor plan layout; participatory planning; low-income housing; design theory; design proces
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2006_e090b
id	sigradi2006_e090b
authors	Hanna, Sean and Turner, Alasdair
year	2006
title	Teaching parametric design in code and construction
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 158-161
summary	Automated manufacturing processes with the ability to translate digital models into physical form promise both an increase in the complexity of what can be built, and through rapid prototyping, a possibility to experiment easily with tangible examples of the evolving design. The increasing literacy of designers in computer languages, on the other hand, offers a new range of techniques through which the models themselves might be generated. This paper reviews the results of an integrated parametric modelling and digital manufacturing workshop combining participants with a background in computer programming with those with a background in fabrication. Its aim was both to encourage collaboration in a domain that overlaps both backgrounds, as well as to explore the ways in which the two working methods naturally extend the boundaries of traditional parametric design. The types of projects chosen by the students, the working methods adopted and progress made will be discussed in light of future educational possibilities, and of the future direction of parametric tools themselves. Where standard CAD constructs isolated geometric primitives, parametric models allow the user to set up a hierarchy of relationships, deferring such details as specific dimension and sometimes quantity to a later point. Usually these are captured by a geometric schema. Many such relationships in real design however, can not be defined in terms of geometry alone. Logical operations, environmental effects such as lighting and air flow, the behaviour of people and the dynamic behaviour of materials are all essential design parameters that require other methods of definition, including the algorithm. It has been our position that the skills of the programmer are necessary in the future of design. Bentley’s Generative Components software was used as the primary vehicle for the workshop design projects. Built within the familiar Microstation framework, it enables the construction of a parametric model at a range of different interfaces, from purely graphic through to entirely code based, thus allowing the manipulation of such non-geometric, algorithmic relationships as described above. Two-dimensional laser cutting was the primary fabrication method, allowing for rapid manufacturing, and in some cases iterative physical testing. The two technologies have led in the workshop to working methods that extend the geometric schema: the first, by forcing an explicit understanding of design as procedural, and the second by encouraging physical experimentation and optimisation. The resulting projects have tended to focus on responsiveness to conditions either coded or incorporated into experimental loop. Examples will be discussed. While programming languages and geometry are universal in intent, their constraints on the design process were still notable. The default data structures of computer languages (in particular the rectangular array) replace one schema limitation with another. The indexing of data in this way is conceptually hard-wired into much of our thinking both in CAD and in code. Thankfully this can be overcome with a bit of programming, but the number of projects which have required this suggests that more intuitive, or spatial methods of data access might be developed in the future.
keywords	generative design; parametric model; teaching
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	acadia07_040
id	acadia07_040
authors	Hyde, Rory
year	2007
title	Punching Above Your Weight: Digital Design Methods and Organisational Change in Small Practice
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 40-47
doi	https://doi.org/10.52842/conf.acadia.2007.040
summary	Expanding bodies of knowledge imply expanding teams to manage this knowledge. Paradoxically, it can be shown that in situations of complexity—which increasingly characterise the production of architecture generally—the small practice or small team could be at an advantage. This is due to the increasingly digital nature of the work undertaken and artefacts produced by practices, enabling production processes to be augmented with digital toolsets and for tight project delivery networks to be forged with other collaborators and consultants (Frazer 2006). Furthermore, as Christensen argues, being small may also be desirable, as innovations are less likely to be developed by large, established companies (Christensen 1997). By working smarter, and managing the complexity of design and construction, not only can the small practice “punch above its weight” and compete with larger practices, this research suggests it is a more appropriate model for practice in the digital age. This paper demonstrates this through the implementation of emerging technologies and strategies including generative and parametric design, digital fabrication, and digital construction. These strategies have been employed on a number of built and un-built case-study projects in a unique collaboration between RMIT University’s SIAL lab and the award-winning design practice BKK Architects.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	caadria2006_637
id	caadria2006_637
authors	J. JINU LOUISHIDHA KITCHLEY
year	2006
title	GENERATIVE EVOLUTIONARY DESIGN AND EVALUATION OF CLUSTER SETTLEMENT PATTERNS
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 637-639
doi	https://doi.org/10.52842/conf.caadria.2006.x.w5t
summary	This project proposes a generative model for a layout of an organic settlement, in particular fishermen’s settlements. It attempts to harness and integrate some of the qualities of organic design process into computer-aided design, capture the complexities of an organic solution and apply it to the housing design decisions. The two complementary fields of Shape Grammar and Generative Evolutionary Design have been converged for this purpose. Shape Grammar is used to extract the style and aspects of organically evolved fisherman’s housing settlement. Generative Evolutionary Design which uses genetic algorithms as a search mechanism is used to explore alternatives and to evaluate the generated design for its functional and usability values and identify the fitter solutions.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ijac20064104
id	ijac20064104
authors	Sass, Larry
year	2006
title	A wood frame grammar: A generative system for digital fabrication
source	International Journal of Architectural Computing vol. 4 - no. 1, 51-67
summary	A novel design system is presented that generates information for house construction exclusively from 3/4" plywood sheets. A shape grammar routine is employed to subdivide an initial solid shape into constructible components for desktop digital fabrication and design evaluation as a physical model. Once approved final construction can happen with components cut on a CNC wood router after the design has been validated by a laser cut model. Shape grammar rule format is used to design functions that build geometry later converted to a scripting language in CAD. Future goals for the grammar are to develop a complete CAD program that translates 3D designs to 2D drawings for flat digital fabrication. The ultimate goal of the program is to automate the translation of solid models to information for digital fabrication. Currently a manual process the translation allows the designer to focus on the visual aspects of evaluation at any scale with little concern for constructability.
keywords	CNC; Shape Grammars; Scripting
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00005
last changed	2007/03/04 07:08

_id	ecaade2007_143
id	ecaade2007_143
authors	Ulmer, Andreas; Halatsch, Jan; Kunze, Antje; Müller, Pascal; Gool, Luc Van
year	2007
title	Procedural Design of Urban Open Spaces
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 351-358
doi	https://doi.org/10.52842/conf.ecaade.2007.351
summary	This paper presents a novel approach for the automatic creation of vegetation scenarios in real or virtual 3D cities in order to simplify the complex design process and time consuming modeling tasks in urban landscape planning. We introduce shape grammars as a practical tool for the rule-based generation of urban open spaces. The automatically generated designs can be used for pre-visualization, master planning, guided design variation and digital content creation in general (e.g. for the entertainment industry). In a first step, we extend the CGA shape grammar by Müller et al. (2006) with urban planning operations. In a second step, we employ the possibilities of shape grammars to encode design patterns (Alexander et al., 1977). Therefore, we propose several examples of design patterns allowing for an intuitive high-level placement of objects common in urban open spaces (e.g. plants). Furthermore, arbitrary interactions between distinct instances of the vegetation and the urban environment can be encoded. With the resulting system, the designer can efficiently vegetate landscape and city parks, alleys, gardens, patios and even single buildings by applying the corresponding shape grammar rules. Our results demonstrate the procedural design process on two practical example scenarios, each one covering a different scale and different contexts of planning. The first example illustrates a derivation of the Garden of Versailles and the second example describes the usage of high-level rule sets to generate a suburbia model.
keywords	City modeling, design methodology, generative design, simulation, virtual environments
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ascaad2006_paper15
id	ascaad2006_paper15
authors	Anz, Craig and Akel Ismail Kahera
year	2006
title	Critical Environmentalism and the Practice of Re-Construction
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This research focuses on the implications and applications of “critical environmentalism” as a quintessential epistemological framework for urban interventions while implementing digital applications that foster collective, round-table approaches to design. Essentially centering the environment (Umwelt) as an encompassing and interconnecting catalyst between multiple disciplines, philosophies, and modes of inquiry and technologies, the framework reciprocally fosters individual and critical identities associated with particular places, belief systems, and their participants as a primary concern. Critical environmentalism promotes a comprehensive, reciprocally unifying epistemological framework that can significantly inform architectural interventions and the tethered use of its technologies in order to foster increased vitality and a certain coinvested attention to the complexities of the greater domain. Grounding the theory in pedagogical practice, this paper documents an approach to urban design and architectural education, implemented as a case-study and design scenario, where divergent perspectives amalgamate into emergent urban configurations, critically rooted in the conditional partialities of place. Digital technologies are incorporated along with analogical methods as tools to integrate multiple perspectives into a single, working plane. Engaging the above framework, the approach fosters a critical (re)construction and on-going, co-vested regeneration of community and the context of place while attempting to dialogically converge multiple urban conditions and modes-of-thought through the co-application of various digital technologies. Critically understanding complex urban situations involves dialogically analyzing, mapping, and modeling a discursive, categorical structure through a common goal and rationale that seeks dialectic synthesis between divergent constructions while forming mutual, catalyzing impetuses between varying facets. In essence, the integration of varying technologies in conjunction, connected to real world scenarios and a guiding epistemic framework cultivates effective cross-pollination of ideas and modes through communicative and participatory interaction. As such it also provides greater ease in crosschecking between a multitude of divergent modes playing upon urban design and community development. Since current digital technologies aid in data collection and the synthesis of information, varying factors can be more easily and collectively identified, analyzed, and then simultaneously used in subsequent design configurations. It inherently fosters the not fully realized potential to collectively overlay or montage complex patterns and thoughts seamlessly and to thus subsequently merge a multitude of corresponding design configurations simultaneously within an ongoing, usable database. As a result, the pedagogical process reveals richly textured sociocultural fabrics and thus produces distinct amplifications in complexity and attentive management of diverse issues, while also generating significant narratives and themes for fostering creative and integrative solutions. As a model for urban community and social development, critical environmentalism is further supported the integrative use of digital technologies as an effective means and management for essential, communicative interchange of knowledge and thus rapprochement between divergent modes-of-thought, promoting critical, productive interaction with others in the (co)constructive processes of our life-space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	acadia06_064
id	acadia06_064
authors	Luhan, Gregory A.
year	2006
title	Synthetic Making
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 64-67
doi	https://doi.org/10.52842/conf.acadia.2006.064
summary	Various approaches of virtual and physical modeling have led to a synthetic form of making that is plastic and scalable in nature. This shift from traditional forms of representing and generating architecture now offers a better possibility of full-scale construction and fabrication processes and links transparently to industry. Architects are beginning to dynamically inform the visioning processes of assemblies and design through a range of precise subassemblies. Further to this end, the synthetic techniques and materials are opening up avenues for designers to investigate a range of fibers and fabrics that radically transform light and color renditions, and texture. Investigations in the realm of traditional materials such as stone, wood, and concrete continue to evolve, as do their associated methods of making. As a result of synthetic technologies, architects today have the possibility to work along side industry engineers and professionals to design castings, moldings, patterns, and tools that challenge not only the architectural work of art, but industrial and product design as well. This cultural shift from physical space to virtual space back to physical space and the combination of hand-, digital-, and robotic-making offers a unique juxtaposition of the built artifact to its manufacturing that challenges both spatial conventions and also the levels of precision and tolerance by which buildings are assembled. Traditional forms of documentation for example result typically in discrepancies between the drawn and the actualized which are now challenged by the level of precision and tolerance at the virtual level. It is within this context that leading-edge architects and designers operate today. Yet, how the profession and the academy respond to these opportunities remains an open line of inquiry and addressing these concerns opens up the rich potential enabled through synthetic making.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	cf2011_p115
id	cf2011_p115
authors	Pohl, Ingrid; Hirschberg Urs
year	2011
title	Sensitive Voxel - A reactive tangible surface
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 525-538.
summary	Haptic and tactile sensations, the active or passive exploration of our built surroundings through our sense of touch, give us a direct feeling and detailed information of space, a sense of architecture (Pallasmaa 2005). This paper presents the prototype of a reactive surface system, which focuses its output on the sense of touch. It explains how touch sensations influence the perception of architecture and discusses potential applications that might arise from such systems in the future. A growing number of projects demonstrate the strong impact of interaction design on the human senses and perception. They offer new ways of sensing and experiencing architectural space. But the majority of these interaction concepts focus on visual and auditory output-effects. The sense of touch is typically used as an input generator, but neglected as as a potential receiver of stimuli. With all the possibilities of sensors and micro-devices available nowadays, there is no longer a technical reason for this. It is possible to explore a much wider range of sense responding projects, to broaden the horizon of sensitive interaction concepts (Bullivant 2006). What if the surfaces of our surroundings can actively change the way it feels to touch them? What if things like walls and furniture get the ability to interactively respond to our touch? What new dimensions of communication and esthetic experience will open up when we conceive of tangibility in this bi-directional way? This paper presents a prototype system aimed at exploring these very questions. The prototype consists of a grid of tangible embedded cells, each one combining three kinds of actuators to produce divergent touch stimuli. All cells can be individually controlled from an interactive computer program. By providing a layering of different combinations and impulse intensities, the grid structure enables altering patterns of actuation. Thus it can be employed to explore a sort of individual touch aesthetic, for which - in order to differentiate it from established types of aesthetic experiences - we have created the term 'Euhaptics' (from the Greek ŒµœÖ = good and Œ¨œÄœÑœâ = touch, finger). The possibility to mix a wide range of actuators leads to blending options of touch stimuli. The sense of touch has an expanded perception- spectrum, which can be exploited by this technically embedded superposition. The juxtaposed arrangement of identical multilayered cell-units offers blending and pattern effects of different touch-stimuli. It reveals an augmented form of interaction with surfaces and interactive material structures. The combination of impulses does not need to be fixed a priori; it can be adjusted during the process of use. Thus the sensation of touch can be made personally unique in its qualities. The application on architectural shapes and surfaces allows the user to feel the sensations in a holistic manner ‚Äì potentially on the entire body. Hence the various dimensions of touch phenomena on the skin can be explored through empirical investigations by the prototype construction. The prototype system presented in the paper is limited in size and resolution, but its functionality suggests various directions of further development. In architectural applications, this new form of overlay may lead to create augmented environments that let inhabitants experience multimodal touch sensations. By interactively controlling the sensual patterns, such environments could get a unique ‚Äútouch‚Äù for every person that inhabit them. But there may be further applications that go beyond the interactive configuration of comfort, possibly opening up new forms of communication for handicapped people or applications in medical and therapeutic fields (Grunwald 2001). The well-known influence of touch- sensations on human psychological processes and moreover their bodily implications suggest that there is a wide scope of beneficial utilisations yet to be investigated.
keywords	Sensitive Voxel- A reactive tangible surface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2007_068
id	ecaade2007_068
authors	Schindler, Christoph; Châtelet, Maud; Wiskemann, Barbara; Zieta, Oskar
year	2007
title	Umbrella Schoolyard Roofs in Zurich
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 35-42
doi	https://doi.org/10.52842/conf.ecaade.2007.035
summary	The paper discusses a 1:1 student workshop on digital sheet metal fabrication organized in collaboration between ETH Zurich and the City of Zurich in 2005 and 2006. During the workshop a structure of fifteen sheet metal schoolyard roofs was designed, produced, and constructed by the participating students. The workshop was set up to explore how current academic topics such as CAD/CAM, digital fabrication with minimal tolerance, and design optimization with genetic algorithms could be incorporated in a permanent structure with legal building standards and a professional construction sequence.
keywords	Teaching seminar workshop 1:1, digital sheet metal fabrication, pavilion roof structure, genetic algorithms
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2007_010
id	ecaade2007_010
authors	Artopoulos, Giorgos; Kourtis, Lampros
year	2007
title	The House of Affects Project
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 777-784
doi	https://doi.org/10.52842/conf.ecaade.2007.777
summary	The House of Affects is an experimental installation to be part of the PerFormaSpace project pursued at the University of Cambridge, UK (DIGIS) and Goldsmiths College London, U.C.L. (Digital Studios), currently partially funded by Arts&Business East 2006, in collaboration with Econavate, UK who will provide their technical expertise in fabrication using recycled materials. This paper presents project-specific information and theoretical discussion on the design process and the computational methods used to develop advanced adaptive structural components in relationship to behavioral goals, criteria and constraints.
keywords	Optimization, computational architecture, architectonics, adaptability
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2006_e033b
id	sigradi2006_e033b
authors	Castillo, Tim
year	2006
title	Hybrid[s] : new pedagogical applications for designing our evolving spatial environment
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 131-136
summary	The continual emergence of new informational and technological systems has impacted our cultural landscape. As society continues to evolve, we are becoming more connected to virtual systems that impact our spatial environment. The awareness and understanding of these invisible forces requires new curricular pedagogies in architectural education. This paper will document an ongoing course that was developed to research new methodologies for working with haptic environments and informational systems. Utilizing a high performance-computing center, students in the class are developing new adaptive intelligent spatial systems that engage a multiplicity of scales. They researched environments for PDA’s (Personal Data Assistance), I-Pods, cellular phones, GPS (Guidance Positioning Systems) and a new immersive virtual dome environment. The goal of the class was to reevaluate how architectural practice in the future will encompass a more holistic approach to both physical and virtual spatial development.
keywords	Design tools and methods
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2006_561
id	caadria2006_561
authors	HONG-SHENG CHEN, CHAN-JUI LIU
year	2006
title	AN ADAPTIVE DESIGN SUPPORT SYSTEM FOR INTERACTIVE IMAGE SEARCHING WITH DATA MINING METHODOLOGY
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 561-563
doi	https://doi.org/10.52842/conf.caadria.2006.x.g8b
summary	This study explodes a domain where the use of pictures is essential [Sabrina Kacher 2002]. Designers need a way to rapidly get image. Recent years, there are more and more companies start to store and sale images for designers. They try to use hypermedia or website system to support designers when they need images.
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: