Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 596

Reformat results as: short short into frame detailed detailed into frame

_id	acadia06_317
id	acadia06_317
authors	Lee, E. S., Hong, S., Johnson, Brian R.
year	2006
title	Context Aware Paper-Based Review Instrument A Tangible User Interface for Architecture Design Review
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 317-327
doi	https://doi.org/10.52842/conf.acadia.2006.317
summary	We describe the design and implementation of a prototype computer-supported collaborative work (CSCW) environment for review of architectural construction documents. This environment utilizes a novel plain-paper tangible interface that supports shared activity such as review of construction documents using an “over the shoulder” computational assistant called CAPRI.Despite the increasing use of computers, work in most architecture firms still largely revolves around paper drawings. Architects structure their work around paper instead of digital representations for reasons of legal liability and tradition, as well as technical limitations. While hardcopy is intuitive, dense, and easy to access, it lacks direct connection to the wide range of design knowledge increasingly available in interactive design environments. This lack is felt most acutely during design review processes, when the designer or reviewer is often called upon to consult and consider holistically a variety of supporting (backing) documents, a task which requires focused attention and a good memory, if errors are to be avoided.Our prototype system enables multiple reviewers to interact equally with a paper construction document using a tangible interface to query detail and backing data from a project knowledge base. We believe this will decrease the reviewer’s cognitive load by bringing design data to them in a contextual and timely way. In doing so, we believe errors will be caught sooner and mistakes reduced.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	sigradi2006_c129b
id	sigradi2006_c129b
authors	Abad, Gabriel; Adriane Borde; Mónica Fuentes; Virginia Agrielav; Adriana Granero and Jacqueline Fernández
year	2006
title	Producción colaborativa de material de enseñanza-aprendizaje de Gráfica Digital con aportes multidisciplinarios [Collaborative production for taught-learning materials for digital graphic with multidisciplinary contributions]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 117-121
summary	For a contribution to problem solving processes at different areas, this paper presents the use of Digital Graphics as a knowledge object for a distance teaching/learning workshop. At the Learning Management System, different theoretical subjects with supporting tools were proposed, and exercises requiring collaborative work. An specific didactic situation using available technologies at Internet for 3D modelling, combined with satellite images and geographic information program was proposed. The final works were then shared by a 3D models repository. As a complement of this experience and in relation with their professional work, every student proposed a new didactic situation including Learning Objects, sharing them with the others members of the group, through conceptual maps built up in a co-operative way.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_c086a
id	sigradi2006_c086a
authors	Bustos Lopez, Gabriela Ilusion and Vélez Jahn, Gonzalo
year	2006
title	Alternativas de Diseño: Sede virtual interactiva para el Taller Virtual de las Américas [Alternatives of Design: 3D Interactive Virtual Site to "Las Americas Virtual Design Studio"]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 47-51
summary	Alternatives of Design is a course that aims to prepare architects from the Master Studies Department of Computing in Architecture (LUZ), in two ways: first, by expanding their perspective about potentialities of using new virtual reality technologies in architecture, and second, by qualifying them to apply this acquired theoretical knowledge in their professional environment, The goal of this research is to describe the products of the course Alternatives of Design 2005, which include: a methodology of designing to the cyberspace by using VRML and Java Script, in order to achieve a proposal of a Site to "Las Americas Virtual Design Studio". This site is projected as a digital manager to interactive simulation in multiuser virtual worlds, specifically to virtual architectonical workshops, With this proposal, it is possible to integrate many users, in real time, from different locations on the same virtual world in Internet.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_e068d
id	sigradi2006_e068d
authors	Catovic-Hughes, Selma
year	2006
title	Digital Storytelling: "Memory….. Sarajevo, my personal story"
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 337-340
summary	“It was a fresh summer night, sky deprived of stars, and hardly any signs of life. After hours of waiting, well passed midnight, they finally allowed us to enter. I couldn’t see or hear much, except movements of those in front of me, but judging by intense scent of mildew and worm-like smell of earth, I realized my mile long underground adventure had begun. There was no looking back, only the brave steps ahead into my new, and hopefully, safe and fruitful future.” [ from diary95 ] Just like many teens around the world, I too kept a journal. It began with playful thoughts of a teenage girl, living in Sarajevo, enjoying life. On my fifteenth birthday, those carefree moments were soon replaced with brutal facts of life under siege: Sarajevo and its citizens had been surrounded by the Serbs who took over all the roads leading in and out of the city. Three years later, I was weeks away from graduating high school, and instead of getting excited, I wondered about my future…”Yesterday was awesome -- we had both electricity and water for eight straight hours…hooray!! You could see the lights miles away…the entire city was awake, making pies and bread, washing clothes, watching movies.” [ from diary93 ] Was I going to spend the rest of my life anticipating the restricted electric and water timetable? Would I wake up the next day to see all my family alive? Would I ever have a chance to fulfill my dreams? This project captures the process of [re]tracing steps of my personal journey of leaving Sarajevo to come to the United States and [re]constructing memories as a sequence of spatial events using the artifacts and the text from my war journals. The intent of my project is to define that line between the old and the new, and intertwine and merge its current condition with the facts and memories from the past. Although there was never a permanent “Berlin-wall-like” divider, the natural contours of the river and invisible screens of the snipers served as impermeable walls and divided the city for four years. The implied boundary seemed to be more powerful than the massiveness of the concrete barricades. Is it possible to re-condition something [building, space, soul] to be and feel the same when it had been destroyed and deeply scarred on the inside? Instead of placing banal memorials engraved with the bare facts, how can we make a tribute to a series of events—a time period that changed the fabric of the city—in a more three-dimensional experience? How can we integrate digital phenomenon in the process of the post-war reconstruction to re-trace the past while creating necessary advanced improvements for the new contemporary society? The impact that social conditions have on architecture, art, culture, and ultimately, people can be told in a universal language – digital storytelling, containing pieces of history and personal memories to create representations of time and space of the past, present or future.
keywords	memory; postwar; retrace; reconstruction; memorial
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2009_046
id	caadria2009_046
authors	Haeusler, Matthias Hank
year	2009
title	Modulations of Voxel Surfaces Through Emotional Expressions to Generate A Feedback Loop Between Private Mood and Public Image
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 173-182
doi	https://doi.org/10.52842/conf.caadria.2009.173
summary	My proposal is an investigation into the perceptual boundaries between human and architectural expression. It asks how architecture can creatively adopt human expression by using the emotions ‘displayed’ on the ‘surface face’ as a generator for displaying a surface on a voxel façade to achieve a cross-connecting perceptual change with modulations through emotion (Massumi, 2006). Through voxel facades the public with their expressed emotions will be included in the decision process of defining space, by expressing our innermost feelings through an architectural medium. Thus emotions of the individual have a platform and can be conveyed indirectly to the public, and in turn open up discussions about the state of the community through the state of the façade. An alliance of media and place in an urban context can be achieved and created, with the participation of its inhabitants, along with a new perception of how media and architecture can together shape and inform spatial relations for a feedback loop between private mood and public image.
keywords	Voxel façade; simulation; human-environment interaction; dynamic space
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	32b4
id	32b4
authors	Heylighen, Ann; Casaer, Mathias; Neuckermans, Herman
year	2006
title	UNAWARE: SUPPORTING TACIT DESIGN KNOWLEDGE EXCHANGE
source	International Journal of Web-Based Communities, Volume 2, Number 1, Jan 2006, pp.31-44
summary	DYNAMO (Dynamic Architectural Memory Online) is an interactive platform to share ideas, knowledge and insights in the form of concrete building projects among designers in different contexts and at different levels of expertise. Interaction with various user groups revealed two major thresholds: submitting project material to the platform takes time, effort, and specific skills; in addition, designers tend to sense a psychological threshold to share their ideas and insights with others. In response to this ‘free-ridership’, the paper proposes to conceive DYNAMO as an associative network of projects, and develops ideas about how the links in this network can be determined and updated by exploiting insights implicitly available in project documentation and user (inter)actions. This should allow DYNAMO to learn from the insights of all designers using the platform, active contributors and ‘free-riders’ alike, without any awareness on their side and to apply these insights to continuously enhance its performance.
keywords	architectural design; self-organisation; usage logs; connectionism
series	other
type	normal paper
email
last changed	2006/02/01 14:28

_id	2006_152
id	2006_152
authors	Koutamanis, Alexander
year	2006
title	Contextual awareness in mobile information processing
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 152-159
doi	https://doi.org/10.52842/conf.ecaade.2006.152
summary	Applications of mobile information technologies in architecture and building require a high degree of contextual awareness not only for localization but also for distinguishing between different types of information (relevant, redundant, stable etc.). This awareness refers to the physical context of a device, as well as to the social dynamics of the situation (including interaction with shared information). Architectural knowledge and in particular design representations support the development of contextual awareness but there are significant differences between these representations and the use of information they convey in mobile applications.
keywords	Mobile information processing; context; representation; information systems
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2006_c038a
id	sigradi2006_c038a
authors	Monedero, Javier
year	2006
title	Autoaprendizaje, integración transversal y diseño 3D [Self learning, transversal integration and 3D design]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 80-83
summary	The paper begins with some considerations about the historical evolution of parametric design methods in the advanced industry and their forecoming transference to the field of architecture. Following these considerations it is maintained that this transference will bring about a second revolution in the educational methodologies, more important than the first one, and that this will result in a clearer separation between conceptual knowledge and instrumental knowledge. The need to give a proper place to a growing sector of information and mechanical methods of learning in the academic world should lead to a an adequate integration of computer aided instruction, a broader collaboration between different departments and to e-learning methods established on a regular basis. In this context, an outline of a new experience of this kind, that will start next term in our school, is presented.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2006_e011c
id	sigradi2006_e011c
authors	Narahara, Taro and Terzidis, Kostas
year	2006
title	Optimal Distribution of Architecture Programs with Multiple-constraint Genetic Algorithm
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 299-303
summary	A genetic algorithm (GA) is a search technique for optimizing or solving a problem based on evolutionary biology, using terms and processes such as genomes, chromosomes, cross-over, mutation, or selection. The evolution starts from a population of completely random individuals and happens in generations. In each generation, the fitness of the whole population is evaluated, multiple individuals are stochastically selected from the current population (based on their fitness), modified (mutated or recombined) to form a new population, which becomes current in the next iteration of the algorithm. In architecture, GAs are of special interest mainly because of their ability to address a problem offering a multiplicity of possible solutions. Contrary to other algorithms where the objective is to accommodate a manually conceived diagram, GAs are emergent procedures that evolve over time through multiple attempt cycles (i.e. generations) and therefore offer a bottom-up approach to design. In addition, by using the computational power of computers they can resolve complex interactions between multiple factors and under multiple constraints offering solutions that occasionally surprise the designer. One of the main problems in architecture today is the quantity of the information and the level of complexity involved in most building projects. As globalization and economic development has started to arise at unprecedented levels, the need for large urban developments have become commonplace. Housing projects for a few hundreds to thousands of people have started to emerge over large urban areas. In such cases, the old paradigm for housing design was the development of high rises that served as stacking devices for multiple family housing units. Such a direction was unfortunately the only way to address excessive complexity using manual design skills mainly because it was simple to conceive but also simple to construct. The unfortunate nature of this approach lies rather in the uniformity, similarity, and invariability that these projects express in comparison to individuality, discreteness, and identity that human beings and families manifest. One of the main areas of complexity that could benefit architecture is in housing projects. In these projects there is a typology of residential units that need to be combined in various schemes that will fulfill multiple functional, environmental, and economic constraints. In this paper, the design of a 200-unit residential complex on a corner of two streets in an urban context was investigated as a case study. Recent advancement in tectonics and structural engineering enables the realization of buildings in mega scales and starts to introduce another layer of complexity into the building programs. Conventional design methods relying on the preconceived knowledge based approaches are no longer reliable. Beyond the certain quantitative factors and the complexity of the problems, search occasionally enters into the unpredictable domain of the human perception. Computational approaches to design allows us to go through thousands of iterations in a second and find the solution sets beyond the reach of designers’ intuitive search spaces. Genetic Algorithm can be a potential derivative for finding optimum design solution from indeterminate search spaces constrained by multi dimensional factors.
keywords	Genetic Algorithm; Housing Design; Multiple-constraint
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia07_284
id	acadia07_284
authors	Robinson, Kirsten; Gorbet, Robert; Beesley, Philip
year	2007
title	Evolving Cooperative Behaviour in a Reflexive Membrane
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 284-293
doi	https://doi.org/10.52842/conf.acadia.2007.284
summary	This paper describes the integration of machine intelligence into an immersive architectural sculpture that interacts dynamically with users and the environment. The system is conceived to function as an architectural envelope that might transfer air using a distributed array of components. The sculpture includes a large array of interconnected miniature structural and kinetic elements, each with local sensing, actuation, and machine intelligence. We demonstrate a model in which these autonomous, interconnected agents develop cooperative behaviour to maximize airflow. Agents have access to sensory data about their local environment and ‘learn’ to move air through the working of a genetic algorithm. Introducing distributed and responsive machine intelligence builds on work done on evolving embodied intelligence (Floreano et al. 2004) and architectural ‘geotextile’ sculptures by Philip Beesley and collaborators (Beesley et al. 1996-2006). The paper contributes to the general field of interactive art by demonstrating an application of machine intelligence as a design method. The objective is the development of coherent distributed kinetic building envelopes with environmental control functions. A cultural context is included, discussing dynamic paradigms in responsive architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	sigradi2006_000
id	sigradi2006_000
authors	Soza, Pedro (ed.)
year	2006
title	SiGradi2006
source	Proceedings of the 10th Iberoamerican Congress of Digital Graphics Graphics / ISBN 956-19-0539-6] Santiago de Chile (Chile) 21-23 november 2006, 494 p.
summary	Forty years of development have passed since digital technologies were used in the service of design for the first time but many of the early questions about its usefulness are still open. The beginning [early] period, known as call “analytical”, was founded in a rational and reductionist understanding of the phenomenon, including those related to creative processes. The target was rational optimization for possible solutions around a given problem. Later on, the graphic technologies development meant a huge jump in issues concerning 3D representation of designed objects. A great interest in visualization and “the virtual” then arose: almost everything and any shape, could be modelled and visualized, obtaining representations of space, time, light and matter as never seen before in any field related to imaging. Today these useful technologies are amplified due to the connectivity of the web, stimulating the birth of applications and models which seek to optimize the production processes. However, before of its impact, there is still a question waiting to be answered since the first days of CAD: has all this technology actually allowed the development of better design? The answer doesn’t seem to be obvious, when above all we see ourselves facing the context of a global world that becomes more and more complex. Digital technology is developing very rapidly. Despite this, an equally accelerated improvement in design products is not so clear. The reason for this could be the fact that our practices as designers have not been updated and improved at the same speed as technology. This next Sigradi is about debating how our organizational practices are changing with the digital phenomenon and how the users can positively trigger the potential that lies in these technologies. The hypothesis that underpins this question is the consideration that digital technologies are a unique platform to achieve the necessary integration of knowledge that must feed any contemporary design process. We think that the integration of multidisciplinary knowledge, memories, values and imagination must become the starting point in the production of better design.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	ddss2006-hb-341
id	DDSS2006-HB-341
authors	Usama El Fiky and Mark Cox
year	2006
title	Culturally Accepted Green Architecture Toolbox - Pre-design helping tool and rating system for new built environment in Egypt
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 341-356
summary	This paper describes and analyses the process of developing computer software to incorporate both green architecture design strategies and their cultural indicators in one easy tool to help a designer to match his / her design with green architectural principles in the pre-design stage. The three resources of architectural identity in Egyptian, current and past green building practices with the up to date foreign knowledge of green architecture were combined in one toolbox with their building cultural indicators in Egypt. Using the toolbox in primary design stage helps the designer by providing more information about each green design strategy, how to use it effectively. Finally, the toolbox provides indicators about how much the whole project will be accepted in Egyptian society and to what extend it applies green architectural principles. For verification reason, the toolbox was tested with two groups of students in Egypt and The Netherlands as well as professional architects from both countries.
keywords	Software program, Building culture, Green architecture
series	DDSS
last changed	2006/08/29 12:55

_id	ascaad2007_012
id	ascaad2007_012
authors	Zeile, P.; F. Farnoudi and B. Streich
year	2007
title	Fascination google earth – use in urban and landscape design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 141-148
summary	Virtual 3D-City-and Architecture models, Virtual Globe systems like NASA World Wind and Google Earth as well as new attempts of immersive technologies become more important, not only among experts in spatial planning, but also many private users are interested in these new tools. These developments cause powerful impacts in the general social, cultural and everyday life. Given the dynamic development of Google Earth, the discussion about the representation and the use of geodata for a wide user group - beyond the planning disciplines - reaches new heights. According to expert's opinion, Google Earth with its computer language KML (Keyhole Markup Language) becomes a 3D-GIS-Standard [Rush in 2006]. By the easy and quick representation of three-dimensional (city) structures and single buildings, Google Earth will significantly influence all groups of society. User groups which have not been acquainted with geodata or highly specified and complex GIS-Systems [Dworschak in 2006], discover that working with this data by using Google Earth is great fun. They recognize, that with the help of generally understandable and easily recognizable visualisation of these data, mediation of knowledge becomes very easy. In addition, it is acknowledged that geodata has great potential to add value, in disciplines such as the academics, the financial sector or personal use.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	sigradi2006_e145a
id	sigradi2006_e145a
authors	Heiss, Leah
year	2006
title	Empathy over distance: Wearables as tools for augmenting Remote Emotional Connection
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 66-69
summary	Mainstream communication modes emphasise network speed, connection access, resolution, portability, and aesthetic design as primary to the success of their products. Within this vision a three by four centimetre screen and high resolution display are deemed adequate to emulate the intensities and complexities of face-to-face connection with loved ones. They allow us to ‘be there with you’ from wherever we might be. Yet interpersonal communication is a massively complex phenomenon. It involves a plethora of micro-activities which occur at a physical, physiological, and psychological level allowing us to recognise at a cellular scale intention, motive and emotional authenticity. Our conscious and non-conscious involvement in spatially collocated communication is substantial due to these myriad channels of real-time bi-directional information transfer. While contemporary communications technologies have the capacity to mediate our relationships, they fall short of encouraging the richness of spatially co-present interaction. The research discussed in this paper investigates the potential expansion of remote connection when electronically enhanced apparel is incorporated into the communications mix. Rather than pursuing the manifold functionalities of traditional communications media the garments discussed focus solely on the goal of enhancing empathy between physically distant individuals. This paper reports on the development and testing of a range of garments that conduct presence information between remotely located people. The garments sense, process, transmit and receive the heartbeat wavelength (ECG). They are enabled with ECG sensors, signal processing equipment, small vibration motors, and radio transceivers which allow users to ‘feel’ the heartbeat of a remote friend/lover/relative as vibration through their garment. The prototypes aim to enrich the remote communications experience through reintroducing an embodied, tactile dimension that is present in face-to-face communication. A range of user testing trials will be discussed which have been undertaken to assess the impact of the garments at a conscious and a non-conscious level. Conscious experiences were gauged through qualitative testing, by way of interviews and unsolicited written reactions, which have provided a range of engaging emotional responses. Non-conscious physiological reactions were assessed by recording ECG throughout user-testing periods. This data has been processed using HRV (heart rate variability) analysis software, running on MatLab. Preliminary results suggest that users have strong conscious and non-conscious reactions to the experience of wearing the prototype garments. The paper will describe the data processing techniques and findings of the user testing trials. The development of biosignal sensing garments has raised a range of issues including: innovative potentials for embedded peripheral awareness media; the expansion of the classical body to incorporate remotely sensed information; the issue of data semantics and the development of intensely personal non-verbal languages; and the issue of corporeal privacy when one’s biological information is exposed for potential download. They also bring into question how our bodily experiences might change when we incorporate remote sensory systems.
keywords	Enabled apparel; emotional tools; biosignals
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2006_e160c
id	sigradi2006_e160c
authors	Andrade, Max and Cheng, Liang-Yee
year	2006
title	Diretrizez Geométricas de Auxílio ao Processo de Projeto de Edifícios Residenciais [Geometrical Guidelines to Aid the Design of Floor Plants of Residential Buildings]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 243-247
summary	This paper discusses the basic principles of a geometric method to aid the design process of residential buildings. It makes part of the initial phases of a research whose aim is to develop a computer system to aid the sketching and evaluation of floor plant design of multi-storied residential buildings. The fundamental idea of the research is the existence of some basic patterns of floor plants that reflect the designer’s mental models in this category of building. The models are regarding the usage of the space such as forms and dimensions, the elements for the circulation and the external skins. During the design process, architects work on each one of these models to generate the sketches of the floor plant layout. Generally, the layout of an apartment in multi-storied buildings depends basically on the internal dynamics of the users without the complex relationship with the neighborhood environment as in the case of houses. In this way, it would be easier to identify, to organize and to associate the mental models of multi-storied buildings on geometric basis, which, in their turns, might be effectively used as inputs for the layout planning of new design. By applying the geometric basis, the architects may reduce the universe of feasible alternatives into a small group of heuristic solutions that can be described by using few simple guidelines. In addition to this, the geometric bases of the existing buildings might be used to build a knowledge-based system to aid the architectural design. The objective of this paper is to show some initial results of the research obtained from a survey and the case studies of form, dimensions and topology of existing buildings. To limit the scope of the discussion, only residential buildings with two to three bedrooms are considered. At first, a survey of plants of residential buildings with two and three bedrooms, in Brazil, is carried out. In the next step, the dimensions, shape, external skin perimeter, circulation system and accessibility are analyzed. Finally, typical topologies of the building are investigated.
keywords	Design process; geometric method; residential buildings
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2006_818
id	2006_818
authors	Angulo, Antonieta
year	2006
title	Communication in the Implementation of a Metacognitive Strategy for Learning to Design
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 818-825
doi	https://doi.org/10.52842/conf.ecaade.2006.818
summary	This paper describes an instructional communication strategy that makes use of time-based media techniques (story boarding and animation) in order to empower design studios with means to promote their students’ awareness on the acquisition of metacognitive knowledge and skills. This paper highlights the importance of including the communication of the design processes in the evaluation of learning outcomes. Moreover, the paper proposes that the students should be made constantly aware of their design processes and how effective are the methods they use. It is in this state of awareness that metacognitive knowledge is acquired: knowing how to learn to design. We can cultivate, exploit and enhance the capabilities of design learners, making them more confident and independent as learners as they understand what they need to know and what kind of strategies might work for different design problems and learning opportunities. In the development of an instructional strategy to accomplish this learning goal, the paper proposes it may be possible and potentially beneficial to transfer current metacognitive support strategies from a course on computer visualization techniques to the design studios. The paper elaborates on how these communication strategies could be transferred and implemented in a design studio setting. The results of a recent controlled experiment and considerations about the cognitive style of design students will be used in the preparation of recommendations for future full scale implementations in early design studios.
keywords	Design learning; metacognitive learning strategy; time-based media
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2006_e165b
id	sigradi2006_e165b
authors	Angulo, Antonieta
year	2006
title	Optimization in the Balance between the Production Effort of E-learning Tutorials and their related Learning Outcome
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 122-126
summary	This paper provides evidence on the level of media richness that may be cost effective in the development of e-learning tutorials for teaching and learning computer visualization techniques. For such a purpose the author provides an analysis of low-cost / high-impact media rich products, the effort and cost required in their development and the measurement of related learning outcomes. Circa twenty years of R&D of multimedia and hypermedia applications for instruction have demonstrated the benefits of communicating relevant information to learners using engaging media. Based on this evidence, this paper assumes that due to the cognitive style of design students, the instructional packages for learning computer techniques for design visualization that are rich in media content, tend to be more effective. Available visualization technologies make the development of e-learning tutorials feasible and apparently the logical way to implement our instructional packages. However the question in the development of e-learning tutorials becomes a more strategic one when we are called to reach a level of optimization between producing a package with a basic standard, namely; text & still-graphic based tutorials, or a state-of-the-art package that is based on video demonstrations (more than enough?) that can accommodate the students’ learning requirements and also our production costs. The costs include the human resources (instructor, producers, assistants and others) and the material resources (hardware and software, copies, and others) involved in the creation of the e-learning tutorials. The key question is: What is good enough, and what is clearly superfluous? In order to confirm our hypothesis and propose a relevant balance between media richness and learning effectiveness, this paper describes an experiment in the use of two different levels of media richness as used to deliver instructions on the production of computer animations for design visualization. The students recruited for this experiment were fairly familiarized with the use of 3D modeling concepts and software, but had no previous knowledge of the techniques included in the tutorials; in specific; camera animation procedures. The students, separated in two groups, used one of the two methods; then they proceeded to apply their newly acquired skills in the production of an animation without using the help of any external means. The assessment of results was based on the quality of the final product and the students’ performance in the recall of the production procedures. Finally an interview with the students was conducted on their perception of what was accomplished from a metacognitive point of view. The results were processed in order to establish comparisons between the different levels of achievement and the students’ metacognitive assessment of learning. These results have helped us to create a clear set of recommendations for the production of e-learning tutorials and their conditions for implementation. The most beneficial characteristics of the two tested methods in relation to type of information, choice of media, method of information delivery, flexibility of production/editorial tools,! and overall cost of production, will be transferred into the development of a more refined product to be tested at larger scale.
keywords	e-learning tutorials; media richness; learning effectiveness; cognitive style; computer visualization techniques
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2006_paper15
id	ascaad2006_paper15
authors	Anz, Craig and Akel Ismail Kahera
year	2006
title	Critical Environmentalism and the Practice of Re-Construction
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This research focuses on the implications and applications of “critical environmentalism” as a quintessential epistemological framework for urban interventions while implementing digital applications that foster collective, round-table approaches to design. Essentially centering the environment (Umwelt) as an encompassing and interconnecting catalyst between multiple disciplines, philosophies, and modes of inquiry and technologies, the framework reciprocally fosters individual and critical identities associated with particular places, belief systems, and their participants as a primary concern. Critical environmentalism promotes a comprehensive, reciprocally unifying epistemological framework that can significantly inform architectural interventions and the tethered use of its technologies in order to foster increased vitality and a certain coinvested attention to the complexities of the greater domain. Grounding the theory in pedagogical practice, this paper documents an approach to urban design and architectural education, implemented as a case-study and design scenario, where divergent perspectives amalgamate into emergent urban configurations, critically rooted in the conditional partialities of place. Digital technologies are incorporated along with analogical methods as tools to integrate multiple perspectives into a single, working plane. Engaging the above framework, the approach fosters a critical (re)construction and on-going, co-vested regeneration of community and the context of place while attempting to dialogically converge multiple urban conditions and modes-of-thought through the co-application of various digital technologies. Critically understanding complex urban situations involves dialogically analyzing, mapping, and modeling a discursive, categorical structure through a common goal and rationale that seeks dialectic synthesis between divergent constructions while forming mutual, catalyzing impetuses between varying facets. In essence, the integration of varying technologies in conjunction, connected to real world scenarios and a guiding epistemic framework cultivates effective cross-pollination of ideas and modes through communicative and participatory interaction. As such it also provides greater ease in crosschecking between a multitude of divergent modes playing upon urban design and community development. Since current digital technologies aid in data collection and the synthesis of information, varying factors can be more easily and collectively identified, analyzed, and then simultaneously used in subsequent design configurations. It inherently fosters the not fully realized potential to collectively overlay or montage complex patterns and thoughts seamlessly and to thus subsequently merge a multitude of corresponding design configurations simultaneously within an ongoing, usable database. As a result, the pedagogical process reveals richly textured sociocultural fabrics and thus produces distinct amplifications in complexity and attentive management of diverse issues, while also generating significant narratives and themes for fostering creative and integrative solutions. As a model for urban community and social development, critical environmentalism is further supported the integrative use of digital technologies as an effective means and management for essential, communicative interchange of knowledge and thus rapprochement between divergent modes-of-thought, promoting critical, productive interaction with others in the (co)constructive processes of our life-space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	acadia06_158
id	acadia06_158
authors	Barrow, Larry R.
year	2006
title	Digital Design and Making 30 Years After
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 158-177
doi	https://doi.org/10.52842/conf.acadia.2006.158
summary	Current design studio pedagogy is undergoing significant change as the means and methods of ideation, representation and making evolve with digital tools; Computer-Aided-Design-Computer-Aided-Manufacturing (CADCAM) remains a contentious topic among many studio instructors and faculty in the academy. Computing is now nearing ubiquity; many processes and products have seen significant evolutionary trends, if not revolutionary transformations; this is no less the case in the academic and firm design studio. The impact of “digital” media and CADCAM, in the design-make process, remains obscure and formally unknown.In this paper, we will review our research and findings from the work of three students; two current students who were in our Digital Design II (DDII) spring 2006 course and the third student, the writer, will reflect on “design and making” from a “pre-architecture” and pre-studio/pre-computer (CADCAM) perspective of ‘making’ thirty-three years ago. The research findings provide universal precepts pertinent to current thinking about emerging studio pedagogy. Our findings suggest that computing technology should be introduced at the outset of design education for the beginning student in basic design studio; and moreover, advanced designers can partner with “digital” tools to ideate and realize their, heretofore unrepresentable and unconstructable, ideas in the early stages of design using CADCAM.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2006_e159b
id	sigradi2006_e159b
authors	Barrow, Larry
year	2006
title	Digital Design Pedagogy - Basic Design - CADCAM Space Box Exploration
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 127-130
summary	This proposed paper will highlight the work of a “pre-architecture” graduate student’s work produced in a “Digital Design II” course in Spring 06. This student has a bachelor’s degree in Architectural Technologies and hopes to attend a “professional” degree program in architecture after completing our Master of Science degree program. The student entered our “pre / post-professional” graduate program as a means of learning more about design, technology and architecture. This provided a rare opportunity to do “research” in the area of digital technology in the early formative phases of a new architecture / design students development. The student chose to study “shadows” as a means of design inquiry. The primary focus of the work was the study of various “4” x 4” x 4” “space-cubes.” The student was given various “design” constraints, and “transformative” operations for the study of positive-negative space relationships, light+shadows, and surface as a means of gaining in-sight to form. The CADCAM tools proved to be empowering for the student’s exploration and learning. With the recent emergence of both more user-friendly hardware and software, we are seeing a paradigm shift in design “ideation.” This is attributed to the evolving human-computer-interface (HCI) that now allows a fluidic means of creative design ideation, digital representation and physical making. Computing technology is now infusing early conceptual design ideation and allowing designers, and form, to follow their ideas. The argument will be supported with primary evidence generated in our pedagogy and research that has shown the visualization and representational power of emerging 2D and 3D CADCAM tools. This paper will analyze the basic “digital design” process used by the writer’s student. Architectural form concepts, heretofore, impossible to model and represent, are now possible due to CADCAM. Emerging designers are integrating “digital thinking” in their fundamental conceptualization of form. These creative free-forms are only feasible for translation to tectonic form using digital design-make techniques. CADCAM tools are empowering designers for form exploration and design creativity. Current computing technology is now infusing the creative design process; the computer is becoming a design “partner” with the designer and is changing form and architecture; thus, we are now seeing unprecedented design-make creativity in architecture.
keywords	Basic Design; CADCAM; Digital Design; Virtual 3D Models; Physical 3D Printed Models
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: