Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 626

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2006-pb-101
id	DDSS2006-PB-101
authors	Aloys W.J. Borgers, I.M.E. Smeets, A.D.A.M. Kemperman, and H.J.P. Timmermans
year	2006
title	Simulation of Micro Pedestrian Behaviour in Shopping Streets
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 101-116
summary	Over the years, scholars have developed various models of pedestrian movement. These models can be used to assess the effects of detailed design decisions or to predict pedestrian behaviour under conditions of crowding. To date, not much attention has been paid to pedestrians' shopping behaviour at the micro level. Therefore, the main purpose of this project is to test a model that aims at simulating micro pedestrian behaviour in shopping streets, including entering shops. The model assumes a detailed network of links to represent the structure of street segments and entrances to the shops. The basic principle underlying the model is that a pedestrian moves from one link in the network to another, adjacent link. In fact, a pedestrian enters a segment at one side, heading for the other side of the segment. However, a pedestrian might enter the segment by leaving a shop as well. Then, the pedestrian might be heading for either side of the segment. While transferring from the current link to the next link, the pedestrian will be attracted by the shops along both sides of the street. The study area is Antwerp's main shopping street. During a one-week workshop in July 2004, students observed pedestrian movement in this shopping street. An inventory of some physical characteristics of the shopping street was made and pedestrians were tracked through two separate segments of the shopping street. In total, 334 pedestrians were tracked. A conventional multinomial logit model is used to simulate pedestrians' micro behaviour. The process of consecutively selecting links continues until the pedestrian has reached one of the terminal links or a shop. The model performs very well. Simulated routes were used to assess the validity of the model. Observed and simulated link loading correspond fairly well, however, the model seems to slightly mispredict the attraction of a number of shops.
keywords	Micro pedestrian behaviour, Shopping street, Simulation
series	DDSS
last changed	2006/08/29 12:55

_id	sigradi2024_344
id	sigradi2024_344
authors	Andia, Alfredo and Peralta Gomez, Naomy
year	2024
title	Bio-Plastic Habitat: Lab-grown dwelling prototypes using bio-plastics
source	Herrera, Pablo C., Gómez, Paula, Estevez, Alberto T., Torreblanca-Díaz, David A. Biodigital Intelligent Systems - Proceedings of the XXVIII Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2024) - ISBN 978-9915-9635-2-5, iBAG-UIC Barcelona, Spain, 13-15 November 2024, pp. 2455–2466
summary	Since 2006, Synthetic Biology (SynBio) has emerged as the fastest-advancing technology in human history, enabling the rewiring of life's code and transforming numerous industries. It facilitates the production of diverse products, from lab-grown meat to mRNA vaccines. Over the last decade, SynBio has begun to influence architectural design and construction materials at macro and micro scales. We discuss how the progression from Engineered Living Materials (ELMs) to Programmable Living Materials (PLMs) represents a significant advancement in material science that will transform the architecture and construction industry. We present design proposals focusing on bioplastics for small-scale bio-grown habitats, exploring tension-based structures and optimizing properties like elasticity. This approach aims to innovate basic housing solutions and integrate sustainable bio-based polymers into architectural practice. Additionally, we present speculative projects of bio-membrane habitats that integrate PLM systems, combining synthetic biology and 3D printing to create self-lifting structures with potential for sustainable infrastructure applications.
keywords	Bio-Architecture, Synthetic Biology, Biomaterials, Biotechnology, Architecture
series	SIGraDi
email
last changed	2025/07/21 11:50

_id	sigradi2022_187
id	sigradi2022_187
authors	Andia, Alfredo
year	2022
title	SynBio-Design: Building new infrastructures and territories with Synthetic Biology.
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 1213–1224
summary	Which kind of imagination do we need for the future of our planet? In the past 150 years, we have completely transformed our biosphere. Today we have arrived at points of no return in global warming! The temperature of the Arctic Ocean will increase by 3-5°C by mid-century. This will lead to disastrous ocean acidification, sea-level rise, and worst of all the thawing of the permafrost that will release 1 trillion tons of carbon dioxide into the atmosphere. In this paper, we argue that building with biology will be the most important force to transform our planet. Since 2006, Synthetic Biology (SynBio) has surfaced as the fastest-growing technology in human history. SynBio involves emerging techniques that allow us to design, edit, and engineer all kinds of living organisms. In this paper, we elaborate on its potential development in growing infrastructures and its impacts on architectural thinking.
keywords	Bio-Inspired Design, Synthetic Biology, Bio-Architecture, Climate Change, Biotechnology
series	SIGraDi
email
last changed	2023/05/16 16:57

_id	sigradi2023_367
id	sigradi2023_367
authors	Andia, Alfredo
year	2023
title	Programmable Bio-Matter Architecture
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1797–1808
summary	Building with biology will be the most important platform to transform our planet in the next decades. Since 2006, Synthetic Biology (SynBio) has surfaced as the fastest-growing technology in human history. This field is allowing us to manipulate the genetic code, biology, food, and vaccines and ultimately aiming to reshape the very essence of existence. In this paper, we assess the development of SynBio and its impacts on architectural thinking, materials, and particularly in Architectural fiction. In this paper, we argue that there are at least three waves of impacts of SynBio technology in construction: Biomaterials, Engineered Living Materials (ELM), and Bio-Matter or biobots. We explore architectural thinking's domain, involving architects and engineers in research and startups. We embrace the architectural envisioning role and present our design work utilizing observed biological growth algorithms. Synthetic Biology urges questioning not only biomaterials but also the field's overarching vision.
keywords	Synthetic Biology, Bio-Architecture, Climate Change, Biotechnology, Architecture
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	sigradi2006_p034e
id	sigradi2006_p034e
authors	Araujo Pires, Julie and Murad, Carlos
year	2006
title	Inscrições hipertextuais: a escrita como imagem na criação visual contemporânea [Hypertext inscription: writing as image in contemporary visual creation]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 411-414
summary	This paper discusses the creative imagination by the speech’s presence on the contemporary projects of art/design. Nowadays the digital era has shattered limits of the space and the user’s perception in a mix between images and texts, built by numeric language, witnessing possible new ways of writing as image. Considering on the duality between verbal and visual, some post-modern artists/projectors are redeeming the germinal quality of image from the alphabet. They use video and electronic technology incorporating the word written in their creation process. In this sense, Gaston Bachelard’s ideas on the philosophy of image and imagination could be helpful to understand that process. At first, looking through the representations accomplished by the artists gesture in their constructions. Afterwards, how those visual poetics explore the word on video project and electronic way as experimentation and on the creation project process.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20064408
id	ijac20064408
authors	Ataman, Osman; Rogers, John; Ilesanmi, Adesida
year	2006
title	Redefining the Wall: Architecture, Materials and Macroelectronics
source	International Journal of Architectural Computing vol. 4 - no. 4, pp. 125-136
summary	As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of a new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology of its own.
series	journal
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000004/art00009
last changed	2007/03/04 07:08

_id	acadia06_158
id	acadia06_158
authors	Barrow, Larry R.
year	2006
title	Digital Design and Making 30 Years After
doi	https://doi.org/10.52842/conf.acadia.2006.158
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 158-177
summary	Current design studio pedagogy is undergoing significant change as the means and methods of ideation, representation and making evolve with digital tools; Computer-Aided-Design-Computer-Aided-Manufacturing (CADCAM) remains a contentious topic among many studio instructors and faculty in the academy. Computing is now nearing ubiquity; many processes and products have seen significant evolutionary trends, if not revolutionary transformations; this is no less the case in the academic and firm design studio. The impact of “digital” media and CADCAM, in the design-make process, remains obscure and formally unknown.In this paper, we will review our research and findings from the work of three students; two current students who were in our Digital Design II (DDII) spring 2006 course and the third student, the writer, will reflect on “design and making” from a “pre-architecture” and pre-studio/pre-computer (CADCAM) perspective of ‘making’ thirty-three years ago. The research findings provide universal precepts pertinent to current thinking about emerging studio pedagogy. Our findings suggest that computing technology should be introduced at the outset of design education for the beginning student in basic design studio; and moreover, advanced designers can partner with “digital” tools to ideate and realize their, heretofore unrepresentable and unconstructable, ideas in the early stages of design using CADCAM.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia06_104
id	acadia06_104
authors	Barrow, Larry R.
year	2006
title	Performance House: A CADCAM Modular House System
doi	https://doi.org/10.52842/conf.acadia.2006.104
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 104-121
summary	Millions of persons around the globe live in low quality indigenous, or Manufactured Housing (MH) systems that often result in low “performance” undesirable living environments and, at times, life threatening habitation. Our research has explored mass production principles in product design and architecture, currently at the single family housing scale, with a focus on the recent devastation along the US Gulf Coast as a result of hurricane impact, most notably hurricane Katrina.“Modern architecture” theoreticians have conceived, written, prototyped and even launched business ventures in an attempt to bring their manufactured housing “ideas” to fruition. However, architects have generally had little “long-term” impact in the area of manufactured housing strategies and the current manufactured housing industry remains archaic and problematic. This paper includes our research of other architects attempts to leverage technology in the manufactured housing industry; additionally, we analyzed current problems in the US mass housing industry. We then derived a set of “design criterion” as a means of anchoring our design inquiry for a proposed factory-built modular house system.Our research encompasses both process and product innovation; this paper reflects on our use of technology to leverage an Industrial Design (ID) process that is inclusive of many “design” partners and team members. We are using both virtual and physical output representation and physical prototyping for a factory-built house system; our Research and Development (R&D) is on-going with our collaborating design-manufacture engineering partners from the automotive, furniture and aerospace research labs here at Mississippi State University. Our goal is to use “industrial design” principles to produce mass housing components that provide durable-sustainable housing.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2006_e159b
id	sigradi2006_e159b
authors	Barrow, Larry
year	2006
title	Digital Design Pedagogy - Basic Design - CADCAM Space Box Exploration
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 127-130
summary	This proposed paper will highlight the work of a “pre-architecture” graduate student’s work produced in a “Digital Design II” course in Spring 06. This student has a bachelor’s degree in Architectural Technologies and hopes to attend a “professional” degree program in architecture after completing our Master of Science degree program. The student entered our “pre / post-professional” graduate program as a means of learning more about design, technology and architecture. This provided a rare opportunity to do “research” in the area of digital technology in the early formative phases of a new architecture / design students development. The student chose to study “shadows” as a means of design inquiry. The primary focus of the work was the study of various “4” x 4” x 4” “space-cubes.” The student was given various “design” constraints, and “transformative” operations for the study of positive-negative space relationships, light+shadows, and surface as a means of gaining in-sight to form. The CADCAM tools proved to be empowering for the student’s exploration and learning. With the recent emergence of both more user-friendly hardware and software, we are seeing a paradigm shift in design “ideation.” This is attributed to the evolving human-computer-interface (HCI) that now allows a fluidic means of creative design ideation, digital representation and physical making. Computing technology is now infusing early conceptual design ideation and allowing designers, and form, to follow their ideas. The argument will be supported with primary evidence generated in our pedagogy and research that has shown the visualization and representational power of emerging 2D and 3D CADCAM tools. This paper will analyze the basic “digital design” process used by the writer’s student. Architectural form concepts, heretofore, impossible to model and represent, are now possible due to CADCAM. Emerging designers are integrating “digital thinking” in their fundamental conceptualization of form. These creative free-forms are only feasible for translation to tectonic form using digital design-make techniques. CADCAM tools are empowering designers for form exploration and design creativity. Current computing technology is now infusing the creative design process; the computer is becoming a design “partner” with the designer and is changing form and architecture; thus, we are now seeing unprecedented design-make creativity in architecture.
keywords	Basic Design; CADCAM; Digital Design; Virtual 3D Models; Physical 3D Printed Models
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_c160e
id	sigradi2006_c160e
authors	Bessone, Miriam and Pérez Miró, Ricardo
year	2006
title	Experiencias interactivas para la transducción entre Música y Arquitectura a través de la forma [Interactive experience for the transcription amid music and architectural shape]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 420-424
summary	The digital technology and the integration of knowledge between musicians and architects it’s presented as a unique platform to explore and give a new meaning to the bonds between Music and Architecture. The presentation describes the experience and the results of creative process that link a group of music and architecture students and teachers for a hypermedia composition. The processes are orientated to the simultaneous construction of products from two approaches: from music to the form (plastic or visual), and vice versa. The exploration begins from musical assignments and it’s limited to two types of situations and creative bonds with digital technology: • Independent actions of the subject-musician and subject-architect. • Conjoint actions of both subjects. // The conclusions allow to evaluate the degree of measurability of the process taken care and possible derivations of the particular interpretations of them in each situation.
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:47

_id	acadia06_150
id	acadia06_150
authors	Boza, Luis Eduardo
year	2006
title	(Un) Intended Discoveries Crafting the Design Process
doi	https://doi.org/10.52842/conf.acadia.2006.150
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 150-157
summary	Computer Numeric Controlled (CNC) fabrication machineries are changing the way we design and build. These technologies have increased productivity through greater efficiencies and have helped to create new forms of practice, including increased specializations and broader collaborative approaches. (Kieran Timberlake 2003: 31). However, some argue that these technologies can have a de-humanizing effect, stripping the human touch away from the production of objects and redistributing the associated skills to machines. (Dormer 1997: 103). The (Digital) Craft studio explored the notions of technology and craft to understand how and when designers should exploit the tools employed (both the hand and the machine) during the design and production processes.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia06_148
id	acadia06_148
authors	Cabrinha, Mark
year	2006
title	Synthetic Pedagogy
doi	https://doi.org/10.52842/conf.acadia.2006.148
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 148-149
summary	As tools, techniques, and technologies expand design practice, there is likewise an innovation in design teaching shifting technology from a means of production and representation to a means of discovery and development. This has implications on studio culture and design pedagogy. Expanding the skills based notion of digital design from know-how, or know-how-to-do, toward know-for, or knowledge-for-action, forms a synthetic relationship between the skills necessary for action and the developing motivations of a young designer. This shifts digital design pedagogy to a medium of active inquiry through play and precision. As digital tools and infrastructure are now ubiquitous in most schools, including the increasing digital material exchange enabled through laser cutters, CNC routers, and rapid prototyping, this topic node presents research papers that engage technology not simply as tools to be taught, but as cognitive technologies which motivate and structure a design students knowledge, both tacit and explicit, in developing a digital and material, ecological and social synthetic environment. Digital fabrication, the Building Information Model, and parametric modeling have currency in architectural education today yet, beyond the instrumentality of teaching the tool, seldom is it questioned what the deeper motivations these technologies suggest. Each of these tools in their own way form a synthesis between representational artifacts and the technological impact on process weaving a wider web of materials, collaboration among peers and consultants, and engagement of the environment that the products of design are situated in.If it is true that this synthetic environment enabled by tools, techniques, and technologies moves from a representational model to a process model of design, the engagement of these tools in the design process is of critical importance in design education. What is the relationship between representation, simulation, and physical material in a digitally mediated design education? At the core of synthetic pedagogies is an underlying principle to form relationships of teaching architecture through digital tools, rather than simply teaching the tools themselves. What principles are taught through teaching with these tools, and furthermore, what new principles might these tools develop?
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia06_411
id	acadia06_411
authors	Campbell, Cameron
year	2006
title	Digital Design Pedagogy Setting the Foundation for Digital Design in the Architecture Curriculum
doi	https://doi.org/10.52842/conf.acadia.2006.411
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 411-417
summary	In this paper I will present the work of developing a digital media foundation course that addresses this need to give design students a digital design foundation that crosses over many design disciplines and navigates the inter-relationships of various software packages. These considerations do not preclude students from engaging in the analog-digital debate. Instead, the students become informed participants in understanding the differences, benefits, and liabilities of the mediums. Furthermore, by addressing digital technology at an early stage, the digital divide in architectural education is reduced, and more students have the opportunity to fold digital technology into their foundations of methodologies.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2006_c133d
id	sigradi2006_c133d
authors	Castañé, Dora
year	2006
title	Rosario, Views on the Integral Revitalization of a Cultural Heritage
source	SIGraDi 2006 - [10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006
summary	This work shows the study of the methods and techniques for the development of a virtual vision VRML 3D included in an "Digitally-integrated knowledge base" with interactive interphases of a significantly revitalized fragment of a central area of the city of Rosario, Province of Santa Fé, Argentina, that includes an emblematic heritage for the Argentineans: the National Monument to the Flag. Digital models that partly allow the development of a hypothesis of integration between the digitized information and information technology - new digital proximity - to the effects of being able to investigate the generation of multimedia database that includes three-dimensional and dynamic models of the mentioned type, in this case, urban, architectonic, and cultural heritage. Different views and research on heritage have been developing. Nevertheless, the use of these new 3D non-immersive technologies and inter-phases are opening a new field of vision and understanding of the subject.
keywords	Urban-architectural planning; heritage; virtual reality
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:48

_id	acadia06_232
id	acadia06_232
authors	Chaisuparasmikul, Pongsak
year	2006
title	Bidirectional Interoperability Between CAD and Energy Performance Simulation Through Virtual Model System Framework
doi	https://doi.org/10.52842/conf.acadia.2006.232
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 232-250
summary	The paper describes a novel approach involving interoperability, data modeling technology, and application of the building information model (BIM) focused on sustainable architecture. They share relationships and multiple experiences that have existed for years but have never have been proven. This interoperability of building performance simulation maps building information and parametric models with energy simulation models, establishing a seamless link between Computer Aided Design (CAD) and energy performance simulation software. During the last four decades, building designers have utilized information and communication technologies to create environmental representations to communicate spatial concepts or designs and to enhance spaces. Most architectural firms still rely on hand labor, drafted drawings, construction documents, specifications, schedules and work plans in traditional means. 3D modeling has been used primarily as a rendering tool, not as the actual representation of the project.With this innovative digitally exchange technology, architects and building designers can visually analyze dynamic building energy performance in response to changes of climate and building parameters. This software interoperability provides full data exchange bidirectional capabilities, which significantly reduces time and effort in energy simulation and data regeneration. Data mapping and exchange are key requirements for building more powerful energy simulations. An effective data model is the bidirectional nucleus of a well-designed relational database, critical in making good choices in selecting design parameters and in gaining and expanding a comprehensive understanding of existing data flows throughout the simulation process, making data systems for simulation more powerful, which has never been done before. Despite the variety of energy simulation applications in the lifecycle of building design and construction projects, there is a need for a system of data integration to allow seamless sharing and bidirectional reuse of data.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	8b29
id	8b29
authors	Chaszar, A. (ed.), Burry, M., Eliassen, T., Garofalo, D., Glymph, J., Hesselgren, L., Jonkhans, N., Kienzl, N., Kloft, H., Maher, A., Mueller, V., Palmer, A., Reuss, S., Schuler, M., Schwitter, C., Sharples, C., Sharples, W., Shea, K., Stoller, P., Takemori, T., Woodger, N.
year	2006
title	Blurring the Lines: Computer-Aided-Design and -Manufacturing in Architecture
source	Wiley-Academy, London 224 pp. Architecture in Practice series
summary	The first few years of the 21st century have seen a revolution in the ways that we think about designing and making buildings. In no other area is this more apparent than in the interface of computer-aided design (CAD) and computer-aided manufacture (CAM). The potential blurring or assimilation of these two systems holds the still elusive but golden promise of a direct, smooth transference of design data into large-scale production facilities in which components are directly cut, modelled and moulded. How far off are we from seeing the widespread adoption of this technology? What is the potential for CAD/CAM beyond tailor-made forms? In the future, what is the possibility of complex, large-scale forms being run out in mass-customised buildings?
keywords	associative geometry, auralization, CNC, collaborative design, generative design, parametric design, simulation, visualization
series	book
type	normal paper
email
last changed	2006/06/12 23:35

_id	caadria2010_055
id	caadria2010_055
authors	Chen, Zi-Ru; Chung-Yang Wang, Pei-Chien Hung and Yu-Tung Liu
year	2010
title	Preliminary tectonic phenomena of diversified architectural spatial forms in digital age
doi	https://doi.org/10.52842/conf.caadria.2010.599
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 599-608
summary	The research on tectonics in the architectural field began from the middle of nineteenth century and in recent twenty years digital technology gradually developed and permeated through the field of architecture. Liu and Lim (2006, 2009) integrated classic and digital tectonic factors a present framework of new tectonics. However, the previous studies related to the tectonics in this digital age were only on architectural cases that use a great deal of digital media. The research wants to know what and how the tectonic factors affect the different spatial forms of modern architecture and focused on a case study of the diversified spatial forms, orthogonal, folding and curving. The results show the classic tectonic thinking is imperative until now. It is critical to prove the significance of adding the new digital tectonic factors in digital age.
keywords	Digital and classic tectonics; spatial form; digital media
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ijac20064101
id	ijac20064101
authors	Cheng, Nancy Yen-Wen
year	2006
title	Learning design sketching from animations and storyboards
source	International Journal of Architectural Computing vol. 4 - no. 1, 1-17
summary	A digital pen-and-paper system that generates stroke-by-stroke animations was used to compare the perception of interactive animations versus printed storyboards. Design students studied a space-planning example as either an animation or a storyboard and then emulated the example in doing a similar problem. Students viewing the animations rather than the storyboards performed marginally better in terms of matching the example steps and meeting design quality criteria. Students may understand the process of design sketching, but may lack the skills to copy the steps. Emulating the solution requires both cognitive skills and graphic facility. While beginners could logically organize spatial adjacencies, they often radically resized required program areas to streamline geometry. After organizing building spaces, they lacked the graphic conventions to articulate architectural features, so they could not copy refinement steps. Subjects at all levels used approximately the same number of strokes, with more productive sketching from advanced subjects.
keywords	Teaching with Technology; Sketching; Design Teaching; Pen-Based Computing
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00002
last changed	2007/03/04 07:08

_id	ddss2006-pb-415
id	DDSS2006-PB-415
authors	Ching-Shun Tang
year	2006
title	Smart Structure: Designs with Rapid Prototyping
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 415-429
summary	This research presents the new orientation of the combination of digital modelling with generative programming and joint method of traditional wood structure for manipulating Rapid Prototyping to explore the assembling of free form objects. The presenting of the example indicates that the edition of Maya scripts defines the purpose of design. Through the discussion on scripts developing the assembly of the free-form objects of frames and surfaces and through the achievement that RP produces and examines objects, we bring out the possibilities of the new form developed from the old structure and illustrate how to develop our hypothesis. The developed result could provide the possible new way for free-form assembly. We expatiate our research process and final achievement and provide a new thinking direction in the education field.
keywords	CAD/CAM, Digital fabrication, Rapid prototyping, Traditional wood structure
series	DDSS
last changed	2006/08/29 12:55

For more results click below: