Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 622

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2006_e081d
id	sigradi2006_e081d
authors	Hecker, Douglas
year	2006
title	Dry-In House: A Mass Customized Affordable House for New Orleans
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 359-362
summary	Dry-in house is a mass customized affordable housing system proposed for the reconstruction of New Orleans. The dry-in House gets the owner back to their home site quickly while providing the infrastructure an occupant needs (shelter, water, electricity). The owner is supplied with an inhabitable shell that is customizable before it is fabricated as well as onsite as the project is “fitted out” over time. The key concept is to allow families to participate in the design of their customized homes and to get people back to their home sites as quickly as possible and to give them the opportunity to finish and further customize their home over time. The project addresses inefficiencies and redundancies in emergency housing currently provided by FEMA. Primarily the dry-in House as its name implies provides a timely dried-in space which doubles as a customized infrastructure for the reconstruction of homes and neighborhoods. The project is designed to meet the $59,000 life cycle cost of the presently provided temporary housing, the notorious “FEMA Trailer”. However, the Dry-in House provides a solution that: a) Is permanent rather than temporary. The house will be finished and further customized over time rather than disposed of. b) Reoccupies the owner’s home site rather than a “FEMA ghetto” keeping the community together and functioning. c) Is mass customized rather than mass-standardized allowing the owner to have input on the design of their home. The design is a “starter home” rather than an inflexible and over-determined solution. This also has the benefit of giving variation to the reconstruction of New Orleans as opposed to the monotony of mass-production. d) Allows the owners to further customize their home over time with additional exterior finishes and the subdivision and fit out of the interior. By utilizing plate truss technology and associated parametric modeling software, highly customized trusses can be engineered and fabricated at no additional cost as compared to off-the-shelf trusses. This mass customization technology is employed to create the building section of each individual’s house. The truss is not used in its typical manner, spanning over the house; rather, it is extruded in section to form the house itself (roof, wall, and floor). Dry-in House exploits this building technology to quickly rebuild communities in a sensible manner. It allows for an increased speed of design and construction and most importantly it involves the owner in this process. The process has other benefits like reducing waste not only because it replaces the FEMA trailer which is expensive and disposable but also since the components are prefabricated there is more precision and also quality. The Dry-in House allows the owner-designer to “draw” the section of their new home providing them with a unique design and a sense of belonging and security. The design of the section of the house also provides them with spatial configurations customized relative to site conditions, program etc... Because of the narrow lot configuration of New Orleans, the design maximizes the roof as a source for natural ventilation and light for the interior of the house. In addition, the house is one room deep providing cross ventilation in all rooms minimizing reliance on artificial mechanical systems. The timely and efficient off site fabrication of building sections facilitate larger concentrations of volunteers on site at one time, thereby promoting a greater collective spirit among the community and volunteer workforce, a therapeutic event for the community as they participate in the rebuilding of their homes and city. With individualized building sections arriving on site, the construction process is imagined to be more akin to a barn raising, making possible the drying in of multiple houses in less than one day.
keywords	mass customization; digital manufacturing; affordable housing
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	2006_276
id	2006_276
authors	Rafi, Ahmad
year	2006
title	ILUDS - An Interactive Land Use Database System for Intelligent Cities
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 276-279
doi	https://doi.org/10.52842/conf.ecaade.2006.276
summary	This paper presents the i-putra business channel, a portal that has been completed with a comprehensive database of information relating to commercial and residential properties, and other on-going development components of Putrajaya, one of Malaysia’s intelligent cities. Designers were provided with multimedia-rich information of spaces before making a selection through the Interactive Land Use Database System (ILUDS) which hosted more than 67,000 units of residential and commercial areas in Putrajaya. The database was developed based on category searching features that aimed to be the one-stop brief explanatory system on the Internet. ILUDS depicts an innovative idea for city and urban development to prepare information and virtual interactivities for a better usage in a ‘soft city’ design. The system has the underlying structure that allows for partitioning and ease of handling within which the data can be structured under a graphical interface that facilitates editing, manipulation, attribution and updating. This attribute of city information and associate data offers users a different level of interactivity and provides effective use on architectural and city information.
keywords	ILUDS; intelligent community; intelligent cities; database
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ddss2006-hb-35
id	DDSS2006-HB-35
authors	Y. Gohnai, A. Ohgai, S. Ikaruga, T. Kato, K. Hitaka, M. Murakami, and K. Watanabe
year	2006
title	Development of a Support System for Community-Based Disaster Mitigation Planning Integrated with a Fire Spread Simulation Model Using CA - The results of an experimentation for verification of its usefulness
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 35-51
summary	This research carried out an experiment to verify the usefulness of a WebGIS-based system that we have been developing (A support system for community-based disaster mitigation planning integrated with a fire spread simulation model using CA) BEFORE, DURING and AFTER Workshops. Based on the data collected from the experiment, the usefulness and advantages of the system were verified from various angles. As a result, it was found that even though there are still some issues to be solved, the system is useful and effective as a support tool and also in enhancing awareness before and after Workshops.
keywords	Community-based planning for disaster mitigation, Planning support system, Fire spread simulation, Cellular automata, WebGIS
series	DDSS
last changed	2006/08/29 12:55

_id	ascaad2006_paper15
id	ascaad2006_paper15
authors	Anz, Craig and Akel Ismail Kahera
year	2006
title	Critical Environmentalism and the Practice of Re-Construction
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This research focuses on the implications and applications of “critical environmentalism” as a quintessential epistemological framework for urban interventions while implementing digital applications that foster collective, round-table approaches to design. Essentially centering the environment (Umwelt) as an encompassing and interconnecting catalyst between multiple disciplines, philosophies, and modes of inquiry and technologies, the framework reciprocally fosters individual and critical identities associated with particular places, belief systems, and their participants as a primary concern. Critical environmentalism promotes a comprehensive, reciprocally unifying epistemological framework that can significantly inform architectural interventions and the tethered use of its technologies in order to foster increased vitality and a certain coinvested attention to the complexities of the greater domain. Grounding the theory in pedagogical practice, this paper documents an approach to urban design and architectural education, implemented as a case-study and design scenario, where divergent perspectives amalgamate into emergent urban configurations, critically rooted in the conditional partialities of place. Digital technologies are incorporated along with analogical methods as tools to integrate multiple perspectives into a single, working plane. Engaging the above framework, the approach fosters a critical (re)construction and on-going, co-vested regeneration of community and the context of place while attempting to dialogically converge multiple urban conditions and modes-of-thought through the co-application of various digital technologies. Critically understanding complex urban situations involves dialogically analyzing, mapping, and modeling a discursive, categorical structure through a common goal and rationale that seeks dialectic synthesis between divergent constructions while forming mutual, catalyzing impetuses between varying facets. In essence, the integration of varying technologies in conjunction, connected to real world scenarios and a guiding epistemic framework cultivates effective cross-pollination of ideas and modes through communicative and participatory interaction. As such it also provides greater ease in crosschecking between a multitude of divergent modes playing upon urban design and community development. Since current digital technologies aid in data collection and the synthesis of information, varying factors can be more easily and collectively identified, analyzed, and then simultaneously used in subsequent design configurations. It inherently fosters the not fully realized potential to collectively overlay or montage complex patterns and thoughts seamlessly and to thus subsequently merge a multitude of corresponding design configurations simultaneously within an ongoing, usable database. As a result, the pedagogical process reveals richly textured sociocultural fabrics and thus produces distinct amplifications in complexity and attentive management of diverse issues, while also generating significant narratives and themes for fostering creative and integrative solutions. As a model for urban community and social development, critical environmentalism is further supported the integrative use of digital technologies as an effective means and management for essential, communicative interchange of knowledge and thus rapprochement between divergent modes-of-thought, promoting critical, productive interaction with others in the (co)constructive processes of our life-space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	2006_464
id	2006_464
authors	Mullins, Michael; Tadeja Zupancic, Christian Kühn, Paul Coates and Orhan Kipcak
year	2006
title	V I PA: A virtual campus for virtual space design
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 464-469
doi	https://doi.org/10.52842/conf.ecaade.2006.464
summary	The conceptual design of virtual spaces is creating new places in which to live and work. In consequence, new opportunities for work and employment are opening up for architects as well as for architectural educators. In response to this challenge, VIPA, a transnational virtual campus is currently being developed; it contains an e-learning and research platform for European architectural schools with a focus on virtual space design. The virtual campus integrates administrative, curricular, and communicative infrastructures, interactive, multimedia 3-D contents, and pedagogical considerations in respect of the aims, content and technologies employed. Virtual campuses are already established at most universities in the European Community, yet surprisingly e-learning is not yet widespread in architectural schools in Europe. E-learning is arguably still in an initial research phase; although there are best practice examples where e-learning is already replacing traditional study forms in other teaching disciplines. However, it has been found that although all the universities involved in the VIPA project have been involved in e-learning projects for many years, there is a considerable resistance to e-learning as being equally effective as traditional face-to-face studio teaching. Given the new virtual conditions of space design however, new contexts for learning are increasingly relevant. University curricula have developed out of local competencies, networks of teachers and researchers. These local factors need to be woven into the fabric of a transnational VIPA curriculum and supported with organizational layout, platform, user interfaces and their features. Participants will offer existing courses in virtual space design, as well as developing new ones. This offers the option for both present and future participants to adjust the VIPA courseware to suit local curricula demands, while offering a large range of courses and knowledge. An additional feature of VIPA is thus as a platform for curricula development in virtual space design. The paper reports on the VIPA project’s aims, pedagogical problems, solutions, course content and methods; it will describe prototype results from participating universities and include perspectives on its future application.
keywords	Architectural Education; E-Learning; Virtual Space
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2006_e160c
id	sigradi2006_e160c
authors	Andrade, Max and Cheng, Liang-Yee
year	2006
title	Diretrizez Geométricas de Auxílio ao Processo de Projeto de Edifícios Residenciais [Geometrical Guidelines to Aid the Design of Floor Plants of Residential Buildings]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 243-247
summary	This paper discusses the basic principles of a geometric method to aid the design process of residential buildings. It makes part of the initial phases of a research whose aim is to develop a computer system to aid the sketching and evaluation of floor plant design of multi-storied residential buildings. The fundamental idea of the research is the existence of some basic patterns of floor plants that reflect the designer’s mental models in this category of building. The models are regarding the usage of the space such as forms and dimensions, the elements for the circulation and the external skins. During the design process, architects work on each one of these models to generate the sketches of the floor plant layout. Generally, the layout of an apartment in multi-storied buildings depends basically on the internal dynamics of the users without the complex relationship with the neighborhood environment as in the case of houses. In this way, it would be easier to identify, to organize and to associate the mental models of multi-storied buildings on geometric basis, which, in their turns, might be effectively used as inputs for the layout planning of new design. By applying the geometric basis, the architects may reduce the universe of feasible alternatives into a small group of heuristic solutions that can be described by using few simple guidelines. In addition to this, the geometric bases of the existing buildings might be used to build a knowledge-based system to aid the architectural design. The objective of this paper is to show some initial results of the research obtained from a survey and the case studies of form, dimensions and topology of existing buildings. To limit the scope of the discussion, only residential buildings with two to three bedrooms are considered. At first, a survey of plants of residential buildings with two and three bedrooms, in Brazil, is carried out. In the next step, the dimensions, shape, external skin perimeter, circulation system and accessibility are analyzed. Finally, typical topologies of the building are investigated.
keywords	Design process; geometric method; residential buildings
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_e165b
id	sigradi2006_e165b
authors	Angulo, Antonieta
year	2006
title	Optimization in the Balance between the Production Effort of E-learning Tutorials and their related Learning Outcome
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 122-126
summary	This paper provides evidence on the level of media richness that may be cost effective in the development of e-learning tutorials for teaching and learning computer visualization techniques. For such a purpose the author provides an analysis of low-cost / high-impact media rich products, the effort and cost required in their development and the measurement of related learning outcomes. Circa twenty years of R&D of multimedia and hypermedia applications for instruction have demonstrated the benefits of communicating relevant information to learners using engaging media. Based on this evidence, this paper assumes that due to the cognitive style of design students, the instructional packages for learning computer techniques for design visualization that are rich in media content, tend to be more effective. Available visualization technologies make the development of e-learning tutorials feasible and apparently the logical way to implement our instructional packages. However the question in the development of e-learning tutorials becomes a more strategic one when we are called to reach a level of optimization between producing a package with a basic standard, namely; text & still-graphic based tutorials, or a state-of-the-art package that is based on video demonstrations (more than enough?) that can accommodate the students’ learning requirements and also our production costs. The costs include the human resources (instructor, producers, assistants and others) and the material resources (hardware and software, copies, and others) involved in the creation of the e-learning tutorials. The key question is: What is good enough, and what is clearly superfluous? In order to confirm our hypothesis and propose a relevant balance between media richness and learning effectiveness, this paper describes an experiment in the use of two different levels of media richness as used to deliver instructions on the production of computer animations for design visualization. The students recruited for this experiment were fairly familiarized with the use of 3D modeling concepts and software, but had no previous knowledge of the techniques included in the tutorials; in specific; camera animation procedures. The students, separated in two groups, used one of the two methods; then they proceeded to apply their newly acquired skills in the production of an animation without using the help of any external means. The assessment of results was based on the quality of the final product and the students’ performance in the recall of the production procedures. Finally an interview with the students was conducted on their perception of what was accomplished from a metacognitive point of view. The results were processed in order to establish comparisons between the different levels of achievement and the students’ metacognitive assessment of learning. These results have helped us to create a clear set of recommendations for the production of e-learning tutorials and their conditions for implementation. The most beneficial characteristics of the two tested methods in relation to type of information, choice of media, method of information delivery, flexibility of production/editorial tools,! and overall cost of production, will be transferred into the development of a more refined product to be tested at larger scale.
keywords	e-learning tutorials; media richness; learning effectiveness; cognitive style; computer visualization techniques
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_e048c
id	sigradi2006_e048c
authors	Beck, Mateus Paulo; Brener, Rafael; Giustina, Marcelo and Turkienicz, Benamy
year	2006
title	Light and Form in Design – A Computational Approach
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 254-257
summary	Shape perception is strongly influenced by the reciprocal relation between light and form. Computational applications can increase the number of design alternatives taking into account possible variations in the relation between light and form. The aim of this study is to discuss a pedagogical experience carried out with 5th semester architectural students, based on a series of exercises prior to the term project. The exercises were concerned with the relation between light and form from an aesthetical point of view and should be understood as examples for the use of computers as tools to creatively accelerate the process of design and learning. The paper is divided in five parts. The first one describes the conceptual background for the exercises, a descriptive method for the identification of light effects in architectural objects based on ideas of shape emergence. The exercises’ methodology is explained in the second part, referring to the use of computational applications in 3-dimensional modeling, material and light simulation. The methodology includes different phases: –creation of bi-dimensional compositions according to symmetry operations; –creation of a minimal living space assigning functions to spaces originated from the former composition; –analysis of the impact of light on the form and spaces created; –alteration of form and materials creating new light effects considering the functions related to the spaces. The exercises alternate work in computational environment in two and three dimensions with the use of mockups, lamps and photography. In the third part the results –student’s design steps– are described. In the fourth part the results are analyzed and some conclusions are outlined in the fifth and last part. The use of emergent forms combined with computational tools has proved to be an effective way to achieve an accelerated understanding of the impact of light on forms as demonstrated by the evolution of the students work during the term and by their final results concerning the term project.
keywords	Architectural Design; Lighting; Design Simulation; Virtual Environment
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2006_601
id	caadria2006_601
authors	BINSU CHIANG, MAO-LIN CHIU
year	2006
title	PRIVATE/UN-PRIVATE SPACE: Scenario-based Digital Design for Enhancing User Awareness
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 601-603
doi	https://doi.org/10.52842/conf.caadria.2006.x.s8b
summary	Context awareness is important for human senses of places as well as human computer interaction. The aim of this research paper is focusing on controlling the user's privacy in a smart space which is adaptive to different users for enhancing the user's awareness in his diary life. In Environmental Psychology, the definition of privacy is that an individual has the control of deciding what information of himself is released to others, and under how he interact with others. (Westin 1970) And privacy is categorized as the linguistic privacy and visual privacy. (Sundstorm 1986). Solutions for privacy control: Plan Layout, Vision Boundary, Access Control and Architecture Metaphor - the transmission of information is not ascertainable for every single user. Although information are shown in public, but information is implied by cues and symbols. Only a certain user or a group of users have access to the full context of information. The methodology is to form an analytic framework to study the relationship between information, user and activities by using the computational supports derived from KitchenSense, ConceptNet, Python, 3d Studio Max and Flash; and to record patterns built up by users' behaviour and actions. Furthermore, the scenario-based simulation can envision the real world conditions by adding interfaces for enhancing user awareness.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ijac20064304
id	ijac20064304
authors	Economou, Athanassios; Swarts, Matthew
year	2006
title	Performing Palladio
source	International Journal of Architectural Computing vol. 4 - no. 3, 47-61
summary	The relevance of music theory as an interpretive framework for the understanding of Palladio's work has been one of the most debated subjects in the realm of architectural theory and criticism. Typically the debate is quite abstract and it focuses on possible mappings between the ratios found in Palladio's plans and corresponding ratios used in contemporary musical temperaments. The paper here rather focuses on the actual performance of the ratios found in Palladio's work and the implications of this performance, melodic and harmonic, for the perception of the space for a situated observer/performer. To that extent the study suggests a model of mapping between space, sound and color and correlates that with polygon partition theory to simulate movement within a space. A brief account of the computer implementation with game engines technology is provided in the end. All examples to test these ideas are based on Palladio's Villa Capra.
series	journal
last changed	2007/03/04 07:08

_id	ascaad2007_060
id	ascaad2007_060
authors	Gillispie, D. and C. Calderon
year	2007
title	A framework towards designing responsive public information systems
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 767-782
summary	"Evolving effective responsive systems, and creating a credible interface between the work and the user, requires an awareness of many different types of user, contexts and functions as well as the phenomenological aspects of social and environmental conditions." (Bullivant, 2006). Responsive design and interactive architecture operates at the intersection of Architecture, Arts, Technology, Media Arts, HCI and Interaction Design in a physical context suggesting ways in which the existing physical environments can be augmented and extended adding a greater level of depth, meaning and engagement with the world around us. Through a series of case studies, this paper explores a number of principles which may be applied to the design of responsive environments of which public information systems form part. Divided into three main sections, the paper first explains how responsive environments have addressed the application of public information systems, secondly, through a series of case studies, precedents are highlighted which lead to development of principles for developing designs for responsive environments. The third section discusses and elaborates on these principles which have been developed based upon our own interpretations and grouping of precedents and approaches towards interaction design. This paper contributes towards the field of responsive environments and interactive architecture through an analysis of case studies to infer a framework from which responsive environments may be created and developed.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	sigradi2006_e090b
id	sigradi2006_e090b
authors	Hanna, Sean and Turner, Alasdair
year	2006
title	Teaching parametric design in code and construction
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 158-161
summary	Automated manufacturing processes with the ability to translate digital models into physical form promise both an increase in the complexity of what can be built, and through rapid prototyping, a possibility to experiment easily with tangible examples of the evolving design. The increasing literacy of designers in computer languages, on the other hand, offers a new range of techniques through which the models themselves might be generated. This paper reviews the results of an integrated parametric modelling and digital manufacturing workshop combining participants with a background in computer programming with those with a background in fabrication. Its aim was both to encourage collaboration in a domain that overlaps both backgrounds, as well as to explore the ways in which the two working methods naturally extend the boundaries of traditional parametric design. The types of projects chosen by the students, the working methods adopted and progress made will be discussed in light of future educational possibilities, and of the future direction of parametric tools themselves. Where standard CAD constructs isolated geometric primitives, parametric models allow the user to set up a hierarchy of relationships, deferring such details as specific dimension and sometimes quantity to a later point. Usually these are captured by a geometric schema. Many such relationships in real design however, can not be defined in terms of geometry alone. Logical operations, environmental effects such as lighting and air flow, the behaviour of people and the dynamic behaviour of materials are all essential design parameters that require other methods of definition, including the algorithm. It has been our position that the skills of the programmer are necessary in the future of design. Bentley’s Generative Components software was used as the primary vehicle for the workshop design projects. Built within the familiar Microstation framework, it enables the construction of a parametric model at a range of different interfaces, from purely graphic through to entirely code based, thus allowing the manipulation of such non-geometric, algorithmic relationships as described above. Two-dimensional laser cutting was the primary fabrication method, allowing for rapid manufacturing, and in some cases iterative physical testing. The two technologies have led in the workshop to working methods that extend the geometric schema: the first, by forcing an explicit understanding of design as procedural, and the second by encouraging physical experimentation and optimisation. The resulting projects have tended to focus on responsiveness to conditions either coded or incorporated into experimental loop. Examples will be discussed. While programming languages and geometry are universal in intent, their constraints on the design process were still notable. The default data structures of computer languages (in particular the rectangular array) replace one schema limitation with another. The indexing of data in this way is conceptually hard-wired into much of our thinking both in CAD and in code. Thankfully this can be overcome with a bit of programming, but the number of projects which have required this suggests that more intuitive, or spatial methods of data access might be developed in the future.
keywords	generative design; parametric model; teaching
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	cf2011_p027
id	cf2011_p027
authors	Herssens, Jasmien; Heylighen Ann
year	2011
title	A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary	Architects‚Äîlike other designers‚Äîtend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses‚Äîin the way architecture is conceived, taught and critiqued‚Äîresults in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as ‚Äúmovement‚Äù, ‚Äúguiding‚Äù and/or ‚Äúrest‚Äù plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords	blindness, design parameters, haptics, inclusive design, vision
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2006_613
id	caadria2006_613
authors	JAEHO RYU, NAOKI HASHIMOTO, MAKOTO SATO, MASASHI SOEDA, RYUZO OHNO
year	2006
title	A GAME ENGINE BASED ARCHITECTURAL SIMULATOR ON MULTI-PROJECTOR DISPLAYS
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 613-615
doi	https://doi.org/10.52842/conf.caadria.2006.x.m1v
summary	To make whole one image on screens that is generated by many computers and synchronization among computers, there is a need for a network software environment for multi-projector display system. Although the development costs increase for parallel programming for multi-projector display system, there is a possibility that the program cannot be executed at an enough speed since the network bandwidth might become a bottleneck. There are some software environments for that kind of multi-projector display system like Chromium that is latest version of WireGL (Humphreys, 2001&2002). WireGL is a kind of Client-Server Model, which one rendering server sends the data of rendering to many computers. While it can use the application without modification of source, it requires heavy network traffics. The other type of operating software is VR Juggler (Cruz-Neira, 2002), and CAVE Library that is a kind of Master-Slave Model. In the Master-Slave Model, every computer has same application programs to render the image that only keep the synchronization of rendering and events. But, these programs require a specialized skill and knowledge to modify the source of program for the certain rendering PC-Cluster system.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ascaad2006_paper7
id	ascaad2006_paper7
authors	Lömker, Thorsten M.
year	2006
title	Designing with Machines: solving architectural layout planning problems by the use of a constraint programming language and scheduling algorithms
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	In 1845 Edgar Allan Poe wrote the poem “The Raven”, an act full of poetry, love, passion, mourning, melancholia and death. In his essay “The Theory of Composition” which was published in 1846 Poe proved that the poem is based on an accurate mathematical description. Not only in literature are structures present that are based on mathematics. In the work of famous musicians, artists or architects like Bach, Escher or Palladio it is evident that the beauty and clarity of their work as well as its traceability has often been reached through the use of intrinsic mathematic coherences. If suchlike structures could be described within architecture, their mathematical abstraction could supplement “The Theory of Composition” of a building. This research focuses on an approach to describe principles in architectural layout planning in the form of mathematical rules that will be executed by the use of a computer. Provided that “design” is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a design problem, an exemplary method will be described to solve problems in architectural layout planning. Two problem domains will be examined: the design of new buildings, as well as the revitalization of existing buildings. Mathematical and syntactical difficulties that arise from the attempt to extract rules that relate to the process of building design will be pointed out. To avoid conflicts relating to theoretical subtleness a customary approach has been chosen in this work which is adopted from Operations Research. In this approach design is a synonym for planning, which could be described as a systematic and methodical course of action for the analysis and solution of current or future problems. The planning task is defined as an analysis of a problem with the aim to prepare optimal decisions by the use of mathematical methods. The decision problem of a planning task is represented by an optimization model and the application of an efficient algorithm to aid finding one or more solutions to the problem. The basic principle underlying the approach presented herein is the understanding of design in terms of searching for solutions that fulfill specific criteria. This search will be executed by the use of a constraint programming language, which refers to mathematical as well as to integer and mixed integer programming. Examples of architectural layout problems will be presented that can be solved by the use of this programming paradigm. In addition to this, a second programming approach resulting from the domain of resource-allocation has been followed in this research. It will be demonstrated that it is as well possible, to aid architectural layout planning by the use of scheduling algorithms.
series	ASCAAD
email
last changed	2007/11/27 08:22

_id	eaea2005_199
id	eaea2005_199
authors	Martens, Bob
year	2006
title	Dissemination of knowledge in architectural endoscopy
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 199-206
summary	The first EAEA conference was hosted 1993 in Tampere (Finland) and subsequently a further six conferences have taken place. Future conferences are already pre-scheduled and a steadily rising number of papers has been written. So far, the conference proceedings have been published in a paperbased format and, as these were published in small numbers, it is rather hard to take stock of preceding entries. However, the published proceedings can be regarded as capital for the EAEA-Association and it is both necessary and worthwhile to preserve this collective memory by means of an archived e-collection. At the time of the formation of the EAEA, electronic publishing was not yet widely used. Since then, computerbased infrastructure and related (web-based) software tools have become widely available. There is even an ongoing debate within the associations dedicated to electronic publishing, as to whether conference proceedings should be solely distributed in a digital format. Doubtless, a discussion towards the value of electronic publication output in the framework of research assessments etc. would be a step too far for this paper. Still, a dual strategy for the EAEA could be aiming at the production of a limited number of paperbased copies, which would mainly be distributed to the conference participants (and the remaining part being made available resp. free library copies to make this output more visible). However, the high commercial interest derived by financial revenues is not given and dissemination by digital means is far more in the interest of both the participants and the EAEA-association. Today, the creation of an electronic version of the conference proceedings costs very little extra. In both cases (analogue and digital) the materials should not only be “deposited” on the desktop of individuals, but also be capable of reaching more public destinations. As the conference host is changing biennially, it has to be confirmed that the hosting institution will handle the delivery of metadata. Local printing houses arrange the printing work, and no further interests (concerning copyright, revenues etc) from the side of publishing houses are in charge. The import of the provided metadata is supported by way of self-organisation on a shoestring budget, as it does not require extensive work if properly defined. This means that minimal effort is needed to make the material available and to achieve a certain level of sustainability.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	ddss2006-pb-3
id	DDSS2006-PB-3
authors	Massimiliano Petri, Alessandra Lapucci, Diana Poletti, and Silvana Lombardo
year	2006
title	An Internet Survey for an Activity-Based Model - An urban transportation analysis integrated in a G.I.S. environment
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 3-17
summary	The current research deals with the development of an Activity-Based Multi Agent System fully implemented in a G.I.S. framework and applied to the case study of the historical centre of Pisa. The objective is to create a simulation tool for Pisa population transfers in order to verify how transport demand varies because of interventions on traffic plan (e.g. creating urban areas subject to a toll access for vehicles), or on public transport lines, or on new activities location (e.g. supermarkets, public services etc.). Three different parts of the System have been simultaneously carried out: the first concerns a population sample survey, the second deals with geographical data structuring and the last one, still in elaboration progress, tests the model reliability to estract and implement behavioural rules. The results obtained till now show how the Database itself, containing temporal data about agents activities (extracted by the population sample questionnaire) and urban services the city offers, already represents an important instrument to support decision making process.
keywords	Activity-Based Model, G.I.S., Network Analysis, Decision Trees
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2006-hb-167
id	DDSS2006-HB-167
authors	Michael Balmer and Kai Nagel
year	2006
title	Shape Morphing of Intersection Layouts Using Curb Side Oriented Driver Simulation
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 167-183
summary	In a traffic network, capacities of parts of the network restrict the amount of transport that can be handled by this network. The capacity of a given traffic network element is not fixed, but influenced by parameters such as number of lanes, maximum speed, weather, view horizon, and so on. These parameters also define the maximum capacity of complicated intersections. Special shapes of intersections, particularly in urban regions, may further increase or decrease their capacity. This paper investigates an evolutionary algorithm to automatically improve the geometrical layout of parts of an urban network according to externally specified criteria. The paper consists of two main parts. In the first part, a simulation model is described which is able to produce realistically behaving vehicles only by using information about the curb side locations of the roads. This avoids the need to use lane connectivity, signal plans, etc. - which are details that would change during a change of the intersection layout. In the second part of the paper, the simulation changes the road and intersection layouts based on the behaviour of the vehicles. Using a feedback loop allows one to optimize the capacity of the modelled road system while its spatial extents are minimized. As a case study, a special roundabout is examined: 'Central' in downtown Zurich, Switzerland. The particularity of this roundabout is that it partially behaves like a roundabout but also contains two uncontrolled intersections. Due to its central position in the city, the roundabout is very busy with both individual cars and public transport vehicles.
keywords	Agent simulation method, Intersection layout, Evolutionary algorithm
series	DDSS
last changed	2006/08/29 12:55

_id	sigradi2006_e011c
id	sigradi2006_e011c
authors	Narahara, Taro and Terzidis, Kostas
year	2006
title	Optimal Distribution of Architecture Programs with Multiple-constraint Genetic Algorithm
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 299-303
summary	A genetic algorithm (GA) is a search technique for optimizing or solving a problem based on evolutionary biology, using terms and processes such as genomes, chromosomes, cross-over, mutation, or selection. The evolution starts from a population of completely random individuals and happens in generations. In each generation, the fitness of the whole population is evaluated, multiple individuals are stochastically selected from the current population (based on their fitness), modified (mutated or recombined) to form a new population, which becomes current in the next iteration of the algorithm. In architecture, GAs are of special interest mainly because of their ability to address a problem offering a multiplicity of possible solutions. Contrary to other algorithms where the objective is to accommodate a manually conceived diagram, GAs are emergent procedures that evolve over time through multiple attempt cycles (i.e. generations) and therefore offer a bottom-up approach to design. In addition, by using the computational power of computers they can resolve complex interactions between multiple factors and under multiple constraints offering solutions that occasionally surprise the designer. One of the main problems in architecture today is the quantity of the information and the level of complexity involved in most building projects. As globalization and economic development has started to arise at unprecedented levels, the need for large urban developments have become commonplace. Housing projects for a few hundreds to thousands of people have started to emerge over large urban areas. In such cases, the old paradigm for housing design was the development of high rises that served as stacking devices for multiple family housing units. Such a direction was unfortunately the only way to address excessive complexity using manual design skills mainly because it was simple to conceive but also simple to construct. The unfortunate nature of this approach lies rather in the uniformity, similarity, and invariability that these projects express in comparison to individuality, discreteness, and identity that human beings and families manifest. One of the main areas of complexity that could benefit architecture is in housing projects. In these projects there is a typology of residential units that need to be combined in various schemes that will fulfill multiple functional, environmental, and economic constraints. In this paper, the design of a 200-unit residential complex on a corner of two streets in an urban context was investigated as a case study. Recent advancement in tectonics and structural engineering enables the realization of buildings in mega scales and starts to introduce another layer of complexity into the building programs. Conventional design methods relying on the preconceived knowledge based approaches are no longer reliable. Beyond the certain quantitative factors and the complexity of the problems, search occasionally enters into the unpredictable domain of the human perception. Computational approaches to design allows us to go through thousands of iterations in a second and find the solution sets beyond the reach of designers’ intuitive search spaces. Genetic Algorithm can be a potential derivative for finding optimum design solution from indeterminate search spaces constrained by multi dimensional factors.
keywords	Genetic Algorithm; Housing Design; Multiple-constraint
series	SIGRADI
email
last changed	2016/03/10 09:55

For more results click below: