Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	2006_778
id	2006_778
authors	Dritsas, Stylianos; Renos Charitou and Lars Hesselgren
year	2006
title	Computational Methods on Tall Buildings - The Bishopsgate Tower
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 778-785
doi	https://doi.org/10.52842/conf.ecaade.2006.778
summary	This paper summarizes the ongoing research done on The Bishopsgate Tower in the City of London using parametric design methodologies. The process is indicative of how computational methods will develop in the future and help designers find solutions for increasingly complex spaces.
keywords	Tall Buildings; Computational Geometry; Building Information Management; Façade Optimization
series	eCAADe
email
last changed	2022/06/07 07:55

_id	bsct_dervishi
id	bsct_dervishi
authors	Dervishi, Sokol
year	2006
title	Computational Derivation of Incident Irradiance on Building Facades based on Measured Global Horizontal Irradiance Data
source	Vienna University of Technology; Building Science & Technology
summary	Reliable simulation of buildings' energy performance requires, amongst other things, the availability of detailed information on the magnitudes of incident solar radiation on building facades. However, the availability of the measured data concerning the incident solar radiation on vertical surfaces is restricted to only few locations. In addition, concurrent measurements of horizontal global and horizontal diffuse (or direct normal) irradiance data are likewise available only for a limited number of locations. In contrast, global horizontal irradiance data is available for many locations. This research demonstrates how to computationally derive incident irradiance values on vertical (or otherwise inclined) building surfaces from measured globalirradiance values. Given this context, three methods are considered to compute incident vertical irradiance values based on measured global horizontal irradiance data. Vertical solar irradiance measurements are described. Then, the computationally derived values are compared withcorresponding measurements. The results are evaluated based on their correlation coefficients and relative error. Finally, the application of horizontal-to- vertical irradiance mapping is demonstrated using the case of an office building at Vienna University of Technology.
keywords	Horizontal and vertical irradiance, measurement and simulation, energy performance
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2006/07/02 22:30

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2006_e011c
id	sigradi2006_e011c
authors	Narahara, Taro and Terzidis, Kostas
year	2006
title	Optimal Distribution of Architecture Programs with Multiple-constraint Genetic Algorithm
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 299-303
summary	A genetic algorithm (GA) is a search technique for optimizing or solving a problem based on evolutionary biology, using terms and processes such as genomes, chromosomes, cross-over, mutation, or selection. The evolution starts from a population of completely random individuals and happens in generations. In each generation, the fitness of the whole population is evaluated, multiple individuals are stochastically selected from the current population (based on their fitness), modified (mutated or recombined) to form a new population, which becomes current in the next iteration of the algorithm. In architecture, GAs are of special interest mainly because of their ability to address a problem offering a multiplicity of possible solutions. Contrary to other algorithms where the objective is to accommodate a manually conceived diagram, GAs are emergent procedures that evolve over time through multiple attempt cycles (i.e. generations) and therefore offer a bottom-up approach to design. In addition, by using the computational power of computers they can resolve complex interactions between multiple factors and under multiple constraints offering solutions that occasionally surprise the designer. One of the main problems in architecture today is the quantity of the information and the level of complexity involved in most building projects. As globalization and economic development has started to arise at unprecedented levels, the need for large urban developments have become commonplace. Housing projects for a few hundreds to thousands of people have started to emerge over large urban areas. In such cases, the old paradigm for housing design was the development of high rises that served as stacking devices for multiple family housing units. Such a direction was unfortunately the only way to address excessive complexity using manual design skills mainly because it was simple to conceive but also simple to construct. The unfortunate nature of this approach lies rather in the uniformity, similarity, and invariability that these projects express in comparison to individuality, discreteness, and identity that human beings and families manifest. One of the main areas of complexity that could benefit architecture is in housing projects. In these projects there is a typology of residential units that need to be combined in various schemes that will fulfill multiple functional, environmental, and economic constraints. In this paper, the design of a 200-unit residential complex on a corner of two streets in an urban context was investigated as a case study. Recent advancement in tectonics and structural engineering enables the realization of buildings in mega scales and starts to introduce another layer of complexity into the building programs. Conventional design methods relying on the preconceived knowledge based approaches are no longer reliable. Beyond the certain quantitative factors and the complexity of the problems, search occasionally enters into the unpredictable domain of the human perception. Computational approaches to design allows us to go through thousands of iterations in a second and find the solution sets beyond the reach of designers’ intuitive search spaces. Genetic Algorithm can be a potential derivative for finding optimum design solution from indeterminate search spaces constrained by multi dimensional factors.
keywords	Genetic Algorithm; Housing Design; Multiple-constraint
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	bsct_paipai
id	bsct_paipai
authors	Paipai, Angeliki
year	2006
title	Computational Assessment of Passive Cooling Methods in Buildings
source	Vienna University of Technology; Building Science & Technology
summary	Various factors have been contributing to a recent steady increase in buildings’ demands for cooling energy: environmental changes, increased heat gains due to equipment and growing expectations in view of acceptable indoor thermal conditions. Given this context, it’s both environmentally and economically meaningful to develop and implement passive cooling techniques toward the reduction of buildings’ demand for cooling energy. In the present study, we use parametric simulations to compute the relative impact of various passive cooling technologies toward the reduction of overheating risk in residential buildings. The cooling measures under examination are shading, natural ventilation (emphasizing on night time natural ventilation), and the application of phase change materials (PCM). The buildings that are being used for the parametric studies are an apartment and a double-storey single house, both simulated for a Mediterranean climate (Athens, Greece) and middle-European one (Vienna, Austria). The results showed that passive cooling methods can significantly contribute the reduction of overheating in buildings. In particular shading and night time ventilation have been shown to be very effective especially if applied in combination. PCMs on the other hand, showed a limited potential in the reduction of overheating risk, at least under the specific climatic circumstances.
keywords	Passive cooling; Parametric modeling; Thermal storage; Night ventilation; Phase Changing materials
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2006/07/02 22:30

_id	bsct_tsiopoulou
id	bsct_tsiopoulou
authors	Tsiopoulou, Chamaidi
year	2006
title	Calibrated Sky Luminance Maps for Daylight Simulation
source	Vienna University of Technology; Building Science & Technology
summary	Building design and control applications can benefit from daylight simulation. Sky models help to model the sky conditions and predict the availability of daylight in indoor environments. Sky luminance is changing according to the weather, the season of the year and the time of the day, therefore it is difficult to create an accurate sky model. The simplified models that are currently used for computational simulation do not take into account these constant changes. It is important to test if there is the possibility of creating a sky model that approaches the characteristics of real sky and provides the architects with more precise daylight predictions. As past research has demonstrated, relatively low-cost sky luminance mapping via digital imaging can provide an alternative to highly sophisticated sky scanners and support the provision of information on sky luminance distribution patterns on a more pervasive basis. The aim of this research is first to explore the potential of deriving sky luminance distribution maps based on digital imaging and then to test their efficiency for the prediction of indoor daylight. A comparison is made between the predictions based on existing sky models (CIE Standard Skies and Perez All-weather sky) and the camera-based sky model. Thus, the effects of the selection of the sky model on indoor daylighting prediction are explored. A set of measurements were performed at the roof of the TU Vienna in order to obtain the necessary data. The horizontal illuminance levels due to 12 sky sectors were measured with the help of a sky monitoring device. A scale (1:5) model of an architectural space was used to measure the indoor illuminance values with the help of three sensors. At the same time, images of the sky were obtained with the help of a digital camera with a fish-eye converter. Luminance values were derived from the images and four calibration methods were used to generate accurate sky luminance distribution maps. These variously calibrated luminance values were then compared with the corresponding photometric measurements. Finally, the application of a digitally derived sky model based on the best calibration method was compared with the other two sky models toward the prediction of indoor illuminance levels using the case of the scale model. The results demonstrated that the camera-based sky model was more reliable than the other two sky models. It was concluded that digital imaging combined with parallel photometric calibration can provide a valuable means for a real-time generation of sky luminance maps. Detailed sky luminance models can be generated and their application can increase the predictive accuracy of the computational daylight prediction tools. Moreover, the reliability of daylight simulation can be increased toward supporting the design process and the operation of daylighting systems in buildings.
keywords	Daylight simulation; sky luminance mapping; digital imaging; sky models.
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2006/07/02 22:33

_id	acadia06_230
id	acadia06_230
authors	Anzalone, Phillip
year	2006
title	Synthetic Research
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 230-231
doi	https://doi.org/10.52842/conf.acadia.2006.230
summary	Synthetic Research insinuates a relationship of a meticulous process of discovering truth contradicted against a fabricated, as in concocted, reality. It is important to recognize the logical aspect of synthetic when examining what synthetic research can provide for architectural discourse. Synthesis contrasts with analysis in that it’s primary methods involve recourse to experience; it is experience that is at the heart of synthetic research. The synthesis of theory, architectural constructions, technological artifacts and computational techniques requires experiencing the results of experimentation. Synthetic digital architecture necessitates a discovery process incorporating creation that allows for experience, be it virtual reality, full-scale prototyping or spatial creations; provided experience is a truthful one, and not disingenuous and thereby slipping into the alternate definition of synthetic.Research’s experimental arm, as opposed to the analytic, relies on tinkering - implying the unfinished, the incomplete, the prototype. Examples of this are everywhere. Computer screenshots are a strikingly literal example of synthetic research when used as a means of experiencing a process. Performance mock-ups of building assemblies are a method of synthetic research in that one experiences a set of defined performances in order to discover and redefine the project. The watchmaker craft is an exercise in research/experimentation where material properties are inherent in function and aesthetics; consider how the components interact with the environment - motion, gravity, space-time, temperature. Efficiency at this point is predominantly structural and physical. Decorative or aesthetic elements are applied or integrated in later iterations along with optimization of performance, marketing and costs.What is a architectural research? How can research synthesize the wide range of possibilities for the trajectory of architecture when engaged in digital and computational techniques? The goals, techniques, documentation and other methods of research production have a place in architecture that must be explored, particularly as it related to computation. As in other fields, we must build a legitimate body of research whereby others can use and expand upon, such that digital architectures evolve in innovative as well as prosperous paths.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2007_010
id	ecaade2007_010
authors	Artopoulos, Giorgos; Kourtis, Lampros
year	2007
title	The House of Affects Project
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 777-784
doi	https://doi.org/10.52842/conf.ecaade.2007.777
summary	The House of Affects is an experimental installation to be part of the PerFormaSpace project pursued at the University of Cambridge, UK (DIGIS) and Goldsmiths College London, U.C.L. (Digital Studios), currently partially funded by Arts&Business East 2006, in collaboration with Econavate, UK who will provide their technical expertise in fabrication using recycled materials. This paper presents project-specific information and theoretical discussion on the design process and the computational methods used to develop advanced adaptive structural components in relationship to behavioral goals, criteria and constraints.
keywords	Optimization, computational architecture, architectonics, adaptability
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2006_e070c
id	sigradi2006_e070c
authors	Cardoso, Daniel
year	2006
title	Controlled Unpredictability: Constraining Stochastic Search as a Form-Finding Method for Architectural Design
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 263-267
summary	Provided with a strict set of rules a computer program can perform the role of a simple designer. Taking advantage of a computer’s processing power, it can also provide an unlimited number of variations in the form while following a given set of constraints. This paper delineates a model for interrelating a rule-based system based on purely architectural considerations with non-deterministic computational procedures in order to provide controlled variations and constrained unpredictability. The experimental model consists of a verisimilar architectural problem, the design of a residential tower with a strict program of 200 units of different types in a given site. Following the interpretation of the program, a set of rules is defined by considering architectural concerns such as lighting, dimensions, circulations, etc. These rules are then encoded in a program that generates form in an unsupervised manner by means of a stochastic search algorithm. Once the program generates a design it’s evaluated, and the parameters on the constraints are adjusted in order to produce a new design. This paper presents a description of the architectural problem and of the rule building process, images and descriptions of three different towers produced, and the code for the stochastic-search algorithm used for generating the form. The succesful evolution of the experiments show how in a computation-oriented design process the interpretation of the problem and the rule setting process play a major role in the production of meaningful form, outlining the shifting role of human designers from form-makers to rule-builders in a computation-oriented design endeavour.
keywords	Architectural Design; Stochastic; Random; Rule-based systems; Form-generation
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2006_c169c
id	sigradi2006_c169c
authors	Culagovski Rubio, Rodrigo and Guevara S., Sebastián
year	2006
title	Arquitectura, Datos y Forma: Una primera aproximacion instrumental. [Architecture, data and form: A first instrumental approach]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 268-272
summary	The production of forms via iterative computational processes allows designers to operate on datasets that would be to large to be managed via traditional analog methods. This fact opens the door to new aesthetic and formal experimentation as well as attempts to reference or influence large scale phenomena such as geographical or network based sitatuations. This document presents the results of a series of investigations into the creation of algorithmic and parametric methods or instruments that could inform architectural practice. The work was done by the authors within the Masters of Architecture Program of the Catholic University of Chile.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ijac20053403
id	ijac20053403
authors	Datta, Sambit; Beynon, David
year	2005
title	A Computational Approach to the Reconstruction of Surface Geometry from Early Temple Superstructures
source	International Journal of Architectural Computing vol. 3 - no. 4, 471-486
summary	Recovering the control or implicit geometry underlying temple architecture requires bringing together fragments of evidence from field measurements, relating these to mathematical and geometric descriptions in canonical texts and proposing "best-fit" constructive models. While scholars in the field have traditionally used manual methods, the innovative application of niche computational techniques can help extend the study of artefact geometry. This paper demonstrates the application of a hybrid computational approach to the problem of recovering the surface geometry of early temple superstructures. The approach combines field measurements of temples, close-range architectural photogrammetry, rule-based generation and parametric modelling. The computing of surface geometry comprises a rule-based global model governing the overall form of the superstructure, several local models for individual motifs using photogrammetry and an intermediate geometry model that combines the two. To explain the technique and the different models, the paper examines an illustrative example of surface geometry reconstruction based on studies undertaken on a tenth century stone superstructure from western India. The example demonstrates that a combination of computational methods yields sophisticated models of the constructive geometry underlying temple form and that these digital artefacts can form the basis for in depth comparative analysis of temples, arising out of similar techniques, spread over geography, culture and time.
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00002
last changed	2007/03/04 07:08

_id	acadia06_342
id	acadia06_342
authors	Kobayashi, Yosihiro
year	2006
title	Self-Organizing Map and Axial Spatial Arrangement: Topological Mapping of Alternative Designs
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 342-355
doi	https://doi.org/10.52842/conf.acadia.2006.342
summary	This research attempts to formulate a computational framework for exploring spatial arrangements in the early phases of design. In the physical world, this could be compared to exploring spatial arrangements using cardboard cut-outs or simply a grid of spaces on paper. This research demonstrates the framework by means of a generative design system that introduces axial order in a plan parti made up of discrete 3D objects. The tool is designed to organize the 3D objects along an Axis specified by the user and also rearrange them following user-defined mathematical expressions. The numerical parameters (the dimensions and physical properties of the individual objects) are linked through the mathematical expressions to vary the spatial arrangement of objects. Implementation of the tool involves the Self Organizing Maps (SOMs) as the Graphical User Interface (GUI) in generative systems. This allows the user to select and dynamically view spatial arrangements that have been organized on a map based on their similarity. The application is implemented, tested, and its results are demonstrated using buildings designed by Louis I. Kahn, Frank Lloyd Wright and Mies van der Rohe.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	ddss2006-pb-69
id	DDSS2006-PB-69
authors	Noriel Christopher C. Tiglao
year	2006
title	Improving Social Policy through Spatial Information - Application of small area estimation and spatial microsimulation methods in geographical targeting
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 69-84
summary	The major goal of social policy in most developing countries is poverty alleviation. The ultimate challenge for policymakers is to use the available resources of the Government in order to provide the greatest possible assistance to those who need it most. Geographical targeting has emerged as one of the more feasible and efficient targeting methods. However, its full utilization is seriously hampered by the lack of the needed data sets. On the other hand, new computational approaches have great potential in providing spatially-disaggregate information. The paper explores the application of small area estimation and spatial microsimulation methods in geographical targeting.
keywords	Poverty targeting, Spatial information, Microsimulation, Small area estimation
series	DDSS
last changed	2006/08/29 12:55

_id	2006_198
id	2006_198
authors	Oxman, Rivka
year	2006
title	Educating the Digital Design Thinker - What Do We Teach When We Teach Design
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 198-205
doi	https://doi.org/10.52842/conf.ecaade.2006.198
summary	Designerly ways of thinking have become a significant topic in design research. If indeed, contemporary phenomena of “digital design thinking” are different from traditional models, than there is emerging pressure to pioneer new teaching paradigms Theories and methods of digital design can no longer be conceptualized as the merging of computational tools with conventional formulations of design thinking. Within the framework of this orientation to a critical formulation of new educational agenda, pedagogical issues are considered. A new orientation to understanding the impact of digital media on “digital design thinking” and pedagogy is presented discussed and demonstrated
keywords	Digital Design; Digital Architecture; Digital Design Studio; Design Thinking; Design Pedagogy
series	eCAADe
email
last changed	2022/06/07 08:00

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2006_037
id	caadria2006_037
authors	R. OXMAN
year	2006
title	DIGITAL DESIGN THINKING: IN THE NEW DESIGN IS THE NEW PEDAGOGY
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 37-46
doi	https://doi.org/10.52842/conf.caadria.2006.x.g3r
summary	Theories and methods of digital design can no longer be conceptualized as the merging of computational tools with conventional formulations of design. A new orientation to understanding the impact of digital media on “digital design thinking” and pedagogy is presented discussed and demonstrated.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2006_169
id	caadria2006_169
authors	RABEE M. REFFAT
year	2006
title	A COMPUTATIONAL SYSTEM FOR ENRICHING DISCOVERY IN ARCHITECTURAL DESIGN
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 169-177
doi	https://doi.org/10.52842/conf.caadria.2006.x.a3l
summary	This paper presents a computational system for enriching design discovery in the external 2D representation of architectural plans. Enriching discovery is achieved through an interpretative search process that involves emergent findings. The developed computational system employs a twofold discovery process, generative phase and an interpretative or explorative phase. In the generation phase the system allows designers to depict an initial building design in the form of 2D plans as a set of lines. The system recognizes possible components of the initial design by generating different forms of bounded shapes that are both explicit and implicit using the Hamiltonian circuit approach. In the interpretation phase the discovery process using the quest mechanism is invoked by selecting a geometrical semantic identified in the recognized shapes to generate possible alternative interpretations of the complete representation of initial design. This plays an important role in enriching discovery in the architectural design of buildings and provides a set of new moves and directions for the designer to pursue.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ascaad2006_paper8
id	ascaad2006_paper8
authors	Abdullah, Sajid; Ramesh Marasini and Munir Ahmad
year	2006
title	An Analysis of the Applications of Rapid Prototyping in Architecture
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	Rapid prototyping (RP) techniques are widely used within the design/manufacturing industry and are well established in manufacturing industry. These digital techniques offer quick and accurate prototypes with relatively low cost when we require exact likeness to a particular scale and detail. 3D modeling of buildings on CAD-systems in the AEC sector is now becoming more popular and becoming widely used practice as the higher efficiency of working with computers is being recognized. However the building of scaled physical representations is still performed manually, which generally requires a high amount of time. Complex post-modernist building forms are more faithfully and easily represented in a solid visualization form, than they could be using traditional model making methods. Using RP within the engineering community has given the users the possibility to communicate and visualize designs with greater ease with the clients and capture any error within the CAD design at an early stage of the project or product lifecycle. In this paper, the application of RP in architecture is reviewed and the possibilities of modeling architectural models are explored. A methodology of developing rapid prototypes with 3D CAD models using methods of solid freeform manufacturing in particular Fused Deposition Modeling (FDM) is presented and compared against traditional model making methods. An economical analysis is presented and discussed using a case study and the potential of applying RP techniques to architectural models is discussed.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	c7e6
id	c7e6
authors	Loemker, Thorsten Michael
year	2006
title	Digital Tools for Sustainable Revitalization of Buildings - Finding new Utilizations through Destructive and Non-Destructive Floor Space Relocation
source	Proceedings of the International Conference on Urban, Architectural and Technical Aspects of the Renewal of the Countryside IV., Bratislava, May 2006
summary	In 1845 Edgar Allan Poe wrote the poem “The Raven”, an act full of poetry, love, passion, mourning, melancholia and death. In his essay “The Theory of Composition” which was published in 1846 Poe proved that the poem is based on an accurate mathematical description. Not only in literature are structures present that are based on mathematics. In the work of famous musicians, artists or architects like Bach, Escher or Palladio it is evident that the beauty and clarity of their work as well as its traceability has often been reached through the use of intrinsic mathematic coherences. If suchlike structures could be described within architecture, their mathematical abstraction could supplement “The Theory of Composition” of a building. This research focuses on an approach to describe layout principles of existing buildings in the form of mathematical rules. Provided that “design” is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a design problem, two exemplary methods will be described to apply new utilizations to existing buildings through the use of these rules.
series	other
type	normal paper
email
last changed	2008/10/13 14:06

_id	ascaad2006_paper7
id	ascaad2006_paper7
authors	Lömker, Thorsten M.
year	2006
title	Designing with Machines: solving architectural layout planning problems by the use of a constraint programming language and scheduling algorithms
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	In 1845 Edgar Allan Poe wrote the poem “The Raven”, an act full of poetry, love, passion, mourning, melancholia and death. In his essay “The Theory of Composition” which was published in 1846 Poe proved that the poem is based on an accurate mathematical description. Not only in literature are structures present that are based on mathematics. In the work of famous musicians, artists or architects like Bach, Escher or Palladio it is evident that the beauty and clarity of their work as well as its traceability has often been reached through the use of intrinsic mathematic coherences. If suchlike structures could be described within architecture, their mathematical abstraction could supplement “The Theory of Composition” of a building. This research focuses on an approach to describe principles in architectural layout planning in the form of mathematical rules that will be executed by the use of a computer. Provided that “design” is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a design problem, an exemplary method will be described to solve problems in architectural layout planning. Two problem domains will be examined: the design of new buildings, as well as the revitalization of existing buildings. Mathematical and syntactical difficulties that arise from the attempt to extract rules that relate to the process of building design will be pointed out. To avoid conflicts relating to theoretical subtleness a customary approach has been chosen in this work which is adopted from Operations Research. In this approach design is a synonym for planning, which could be described as a systematic and methodical course of action for the analysis and solution of current or future problems. The planning task is defined as an analysis of a problem with the aim to prepare optimal decisions by the use of mathematical methods. The decision problem of a planning task is represented by an optimization model and the application of an efficient algorithm to aid finding one or more solutions to the problem. The basic principle underlying the approach presented herein is the understanding of design in terms of searching for solutions that fulfill specific criteria. This search will be executed by the use of a constraint programming language, which refers to mathematical as well as to integer and mixed integer programming. Examples of architectural layout problems will be presented that can be solved by the use of this programming paradigm. In addition to this, a second programming approach resulting from the domain of resource-allocation has been followed in this research. It will be demonstrated that it is as well possible, to aid architectural layout planning by the use of scheduling algorithms.
series	ASCAAD
email
last changed	2007/11/27 08:22

For more results click below: