Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 617

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2006_217
id	caadria2006_217
authors	KILIAN, AXEL
year	2006
title	DESIGN EXPLORATION WITH CIRCULAR DEPENDENCIES: A chair design experiment
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 217-226
doi	https://doi.org/10.52842/conf.caadria.2006.x.q2e
summary	The paper demonstrates the need for advanced models of representation for circular dependency networks common in design problems that deal with multiple constraints. Constraints in a design problem are generally perceived as limitations to design exploration. The careful construction of constraint relationships can help to turn constraints into design drivers for the problem instead. Closely related to the notion that new goals may emerge from creating designs is the idea that one goal of planning may be the design activity itself (Simon 1981). The interplay of many constraints can lead to circular dependencies that make design exploration a challenge as any change causes ripples throughout the entire design construct. D’Arcy Thompson (1942) describes form as a diagram of forces. The construction of design representations that reflect such dependency networks pose a challenge and are far from exact matches of the task environment (Simon 1981). The paper proceeds in mapping these abstract observations of the circular dependencies in the design process to a chair experiment from design to fabrication giving detailed descriptions of the interdependencies of material, fabrication and aesthetic constraints. The experiment shows how those constraints were instrumental in achieving the aesthetics of the full scale prototype.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	4559
id	4559
authors	Kilian, Axel
year	2006
title	Design Exploration through Bidirectional Modeling of Constraints
source	Massachusetts Institute of Technology
summary	Today digital models for design exploration are not used to their full potential. The research efforts in the past decades have placed geometric design representations firmly at the center of digital design environments. In this thesis it is argued that models for design exploration that bridge different representation aid in the discovery of novel designs. Replacing commonly used analytical, uni-directional models for linking representations, with bidirectional ones, further supports design exploration. The key benefit of bidirectional models is the ability to swap the role of driver and driven in the exploration. The thesis developed around a set of design experiments that tested the integration of bidirectional computational models in domain specific designs. From the experiments three main exploration types emerged. They are: branching explorations for establishing constraints for an undefined design problem; illustrated in the design of a concept car. Circular explorations for the refinement of constraint relationships; illustrated in the design of a chair. Parallel explorations for exercising well-understood constraints; illustrated in a form finding model in architecture. A key contribution of the thesis is the novel use of constraint diagrams developed to construct design explorers for the experiments. The diagrams show the importance of translations between design representations in establishing design drivers from the set of constraints. The incomplete mapping of design features across different representations requires the redescription of the design for each translation. This redescription is a key aspect of exploration and supports design innovation. Finally, this thesis argues that the development of design specific design explorers favors a shift in software design away from monolithic, integrated software environments and towards open software platforms that support user development.
keywords	Design, exploration, generative, bidirectional, constraints
series	thesis:PhD
type	normal paper
email
more	http://designexplorer.net/newscreens/phd2006/index.html
last changed	2006/12/07 19:52

_id	ascaad2006_paper21
id	ascaad2006_paper21
authors	Abdelhameed, Wael A.
year	2006
title	The Relations Between Design Idea Emergence and Design Solution Direction: digital media use in mass exploration of architectural design
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	The unfolding of research is that design is a creative activity of problem-solving, directed to achieve what architecture should provide man with. The first part of the research investigates Design-Idea Exploration in the initial phases of design process, in terms of exploring the links between Design-Idea Emergence and Design-Solution Direction. The second part of the research presents a use of digital media in Design-Idea Exploration of three dimensional shapes throughout the initial phases of design process. The research has concluded the links between Design Ideas Emergence and Design Solution Directions, and presented the features of the program, which distinguish it from other standard modeling software.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2006_e165b
id	sigradi2006_e165b
authors	Angulo, Antonieta
year	2006
title	Optimization in the Balance between the Production Effort of E-learning Tutorials and their related Learning Outcome
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 122-126
summary	This paper provides evidence on the level of media richness that may be cost effective in the development of e-learning tutorials for teaching and learning computer visualization techniques. For such a purpose the author provides an analysis of low-cost / high-impact media rich products, the effort and cost required in their development and the measurement of related learning outcomes. Circa twenty years of R&D of multimedia and hypermedia applications for instruction have demonstrated the benefits of communicating relevant information to learners using engaging media. Based on this evidence, this paper assumes that due to the cognitive style of design students, the instructional packages for learning computer techniques for design visualization that are rich in media content, tend to be more effective. Available visualization technologies make the development of e-learning tutorials feasible and apparently the logical way to implement our instructional packages. However the question in the development of e-learning tutorials becomes a more strategic one when we are called to reach a level of optimization between producing a package with a basic standard, namely; text & still-graphic based tutorials, or a state-of-the-art package that is based on video demonstrations (more than enough?) that can accommodate the students’ learning requirements and also our production costs. The costs include the human resources (instructor, producers, assistants and others) and the material resources (hardware and software, copies, and others) involved in the creation of the e-learning tutorials. The key question is: What is good enough, and what is clearly superfluous? In order to confirm our hypothesis and propose a relevant balance between media richness and learning effectiveness, this paper describes an experiment in the use of two different levels of media richness as used to deliver instructions on the production of computer animations for design visualization. The students recruited for this experiment were fairly familiarized with the use of 3D modeling concepts and software, but had no previous knowledge of the techniques included in the tutorials; in specific; camera animation procedures. The students, separated in two groups, used one of the two methods; then they proceeded to apply their newly acquired skills in the production of an animation without using the help of any external means. The assessment of results was based on the quality of the final product and the students’ performance in the recall of the production procedures. Finally an interview with the students was conducted on their perception of what was accomplished from a metacognitive point of view. The results were processed in order to establish comparisons between the different levels of achievement and the students’ metacognitive assessment of learning. These results have helped us to create a clear set of recommendations for the production of e-learning tutorials and their conditions for implementation. The most beneficial characteristics of the two tested methods in relation to type of information, choice of media, method of information delivery, flexibility of production/editorial tools,! and overall cost of production, will be transferred into the development of a more refined product to be tested at larger scale.
keywords	e-learning tutorials; media richness; learning effectiveness; cognitive style; computer visualization techniques
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2006_818
id	2006_818
authors	Angulo, Antonieta
year	2006
title	Communication in the Implementation of a Metacognitive Strategy for Learning to Design
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 818-825
doi	https://doi.org/10.52842/conf.ecaade.2006.818
summary	This paper describes an instructional communication strategy that makes use of time-based media techniques (story boarding and animation) in order to empower design studios with means to promote their students’ awareness on the acquisition of metacognitive knowledge and skills. This paper highlights the importance of including the communication of the design processes in the evaluation of learning outcomes. Moreover, the paper proposes that the students should be made constantly aware of their design processes and how effective are the methods they use. It is in this state of awareness that metacognitive knowledge is acquired: knowing how to learn to design. We can cultivate, exploit and enhance the capabilities of design learners, making them more confident and independent as learners as they understand what they need to know and what kind of strategies might work for different design problems and learning opportunities. In the development of an instructional strategy to accomplish this learning goal, the paper proposes it may be possible and potentially beneficial to transfer current metacognitive support strategies from a course on computer visualization techniques to the design studios. The paper elaborates on how these communication strategies could be transferred and implemented in a design studio setting. The results of a recent controlled experiment and considerations about the cognitive style of design students will be used in the preparation of recommendations for future full scale implementations in early design studios.
keywords	Design learning; metacognitive learning strategy; time-based media
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2006_e159b
id	sigradi2006_e159b
authors	Barrow, Larry
year	2006
title	Digital Design Pedagogy - Basic Design - CADCAM Space Box Exploration
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 127-130
summary	This proposed paper will highlight the work of a “pre-architecture” graduate student’s work produced in a “Digital Design II” course in Spring 06. This student has a bachelor’s degree in Architectural Technologies and hopes to attend a “professional” degree program in architecture after completing our Master of Science degree program. The student entered our “pre / post-professional” graduate program as a means of learning more about design, technology and architecture. This provided a rare opportunity to do “research” in the area of digital technology in the early formative phases of a new architecture / design students development. The student chose to study “shadows” as a means of design inquiry. The primary focus of the work was the study of various “4” x 4” x 4” “space-cubes.” The student was given various “design” constraints, and “transformative” operations for the study of positive-negative space relationships, light+shadows, and surface as a means of gaining in-sight to form. The CADCAM tools proved to be empowering for the student’s exploration and learning. With the recent emergence of both more user-friendly hardware and software, we are seeing a paradigm shift in design “ideation.” This is attributed to the evolving human-computer-interface (HCI) that now allows a fluidic means of creative design ideation, digital representation and physical making. Computing technology is now infusing early conceptual design ideation and allowing designers, and form, to follow their ideas. The argument will be supported with primary evidence generated in our pedagogy and research that has shown the visualization and representational power of emerging 2D and 3D CADCAM tools. This paper will analyze the basic “digital design” process used by the writer’s student. Architectural form concepts, heretofore, impossible to model and represent, are now possible due to CADCAM. Emerging designers are integrating “digital thinking” in their fundamental conceptualization of form. These creative free-forms are only feasible for translation to tectonic form using digital design-make techniques. CADCAM tools are empowering designers for form exploration and design creativity. Current computing technology is now infusing the creative design process; the computer is becoming a design “partner” with the designer and is changing form and architecture; thus, we are now seeing unprecedented design-make creativity in architecture.
keywords	Basic Design; CADCAM; Digital Design; Virtual 3D Models; Physical 3D Printed Models
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20064405
id	ijac20064405
authors	Calderon, Carlos; Nyman, Karl; Worley, Nicholas
year	2006
title	The Architectural Cinematographer: Creating Architectural Experiences in 3D Real-time Environments
source	International Journal of Architectural Computing vol. 4 - no. 4, pp. 71-90
summary	This paper addresses the problem of creating new navigation paradigms for experiencing architectural designs in 3D real-time environments. The exploration of techniques other than still images or fly-through animations is complex and manifold, and requires the understanding and skills of many disciplines including cinematography, computer programming, architectural design and communication of 3D space. In this article, we present the Architectural Cinematographer (AC), a first step towards new navigation paradigms for real-time interactive virtual environments that are intended to enhance architectural walkthroughs with interactive camera effects. The AC is a fully developed modification (mod) of the game UnrealTournament2004™ using the Unreal™ game engine and relies on the notions of architectural concepts, cinematographic techniques and game level design to structure the virtual environment (VE) content in a way that facilitates a perception of design qualities in virtual architecture. AC addresses the current lack of either software or a structured approach to facilitate this in real-time architectural visualizations.
series	journal
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000004/art00006
last changed	2007/03/04 07:08

_id	sigradi2006_p016d
id	sigradi2006_p016d
authors	Cavalcanti Neto, José Rodrigues and Leão de Amorim, Arivaldo
year	2006
title	Simulação digital: modelos digitais fotorealísticos no mapeamento e quantificação de patologias em projetos de restauração [Digital Fabrication: photo realistic digital models on mapping and quantifing the pathologies in restoration design]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 341-345
summary	This article is about the experience in the use of digital threedimensional models as an auxiliary tool in the phase of diagnosis on an architecture project of restoration. At first it deals with the importance and the methodology usually used in development of those projects. After telling about an experience that urged to look for new solutions, it was made a first exercise searching a new tool. It had about positive points the fact of being modeled quickly, to have made possible a clear vision of the pathologies and for being easily manipulable, providing a dynamic visualization of the construction. Another experience looked for the possibilities of analysis and quantification of damages in a photorealistic model. Afterwards analyzing the different potentials and restrictions of each accomplished experiment, this work looks for point out news ways that can be followed.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ddss2006-hb-487
id	DDSS2006-HB-487
authors	Chien-Tung Chen and Teng-Wen Chang
year	2006
title	1:1 Spatially Augmented Reality Design Environment
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 487-499
summary	With the development of ubiquitous computing (Weiser, 1991), what will become of the traditional media such as pen and sketches, especially in the design education environment? Or what will they be transformed into? In this research, we focus on the interior design process with a particular type of media-1:1 spatially augmented reality design environment (SARDE). In this research, we tried to implement SARDE and have a scenario experiment to check how designers interact with such design media. Furthermore, through this research, we have come to know more about how designers use design media to represent their design dream.
keywords	Design & Decision Support Systems, Spatially Augmented Reality, Architecture Education, and Computer Visualization
series	DDSS
last changed	2006/08/29 12:55

_id	2006_190
id	2006_190
authors	Chiu, Mao-Lin and Chien-Rung Lou
year	2006
title	Teaching Tectonic Design Studio with A Digital Design Approach
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 190-197
doi	https://doi.org/10.52842/conf.ecaade.2006.190
summary	Digital design education is shifting from software and hardware application to issue-based, methodology-driven and technology-driven exploration. The attempts in design education have to address the future needs for architects, for instance the tectonic design. Our design studio tries to structure the design process to help students understand the principles and use the digital technology to operate tectonic design issue in the process. The dialogue with the materials (virtual and physical ones) is integrated with the exercises. The attempts in the design studio undertaken in National Cheng Kung University provide the foundation for observation and discussion. The pedagogy and approaches are examined, and the potential directions are reported.
keywords	Design studio; digital design; tectonic design; design education
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia06_540
id	acadia06_540
authors	Diewald, J., Frederick, M.
year	2006
title	Building Information Modeling: Interactive Versioning Experiment
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 540-541
doi	https://doi.org/10.52842/conf.acadia.2006.540
summary	Interactive Versioning, is the first experiment of an ongoing investigation into the conceptual role of parametric modeling in the design process. In this case, the form is defined by constrained floor-plate relationships. Originally testing methods using numerical values exported to excel, we obtained undesirable results and shifted our focus to the creation of an interactive model; restoring the direct influence of user input. The result is a 10-floor structure that allows the user to tweak point locations along the slab perimeters that in turn have global effect on the overall geometry of the architectural body. We are using four point definition types: reference above, interactive reference, reference below, and independent value. Interactive reference points use referential constraints defined as x and y distances from the global origin, which change on account of user inputs. Reference above points pull (x,y) values from an interactive point above. Reference below points pull (x,y) values from interactive points below. Independent points are unaffected by changes in any of the other points but may also be tweaked to adjust a form. On any given level, there are 2 interactive reference points, 2 reference above points, 2 reference below points, and 4 independent points. Additionally, 2 length constraints link interactive points with reference above points on the same level. This allows for changes to affect the entire structure rather than only the floor plates immediately above and below a given change. The addition of constraints to the floor outlines will yield a variety of formal results and offer the possibility to further control the output.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2006_234
id	2006_234
authors	Donath, Dirk and Christian Tonn
year	2006
title	Complex design strategies using building information models - Evaluation and interpretation of boundary conditions, supported by computer software
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 234-243
doi	https://doi.org/10.52842/conf.ecaade.2006.234
summary	The choice of a chord and its execution should be regarded as a must and not left to arbitrary wish or superficial speculation. (Johannes Itten, 1961) The paper describes a modular concept for the IT-support of planning practice using BIM (Building Information Modelling) and a parameterized building model. The platform used is the modularized software concept for architectural planning in existing built contexts (prototype software FREAK). The current progress in the development of a reasoned support of planning tasks is described in this paper in more detail. The system consists of a series of software prototypes which are linked to the BIM, utilize the specific data within and demonstrate the value of a consistent and extendable CAD-model. The “Colored Architecture” software prototype is one such design-support module of the software platform and enables the designer to experiment with the parameters colour, light and materials in architectural space. This module supports experimentation, assessment and realization of colours and materials in the architectural design process on a new quality. For instance, the integration of “live radiosity” light simulation allows a qualified and interactive assessment and evaluation of colours and materials in near-real lighting conditions. The paper also details further software prototypes, modules and concepts including building surveying and the design of self-supporting domed structures.
keywords	Design; Parameterized Building Information Modelling; Plausibility; Planning Support; Colour, Material and Light Design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2006_053
id	caadria2006_053
authors	HALIL ERHAN
year	2006
title	LEARNING FROM MASTERS: ACADEMIC APPRENTICESHIP MODEL FOR COMPUTATIONAL DESIGN EDUCATION
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 53-61
doi	https://doi.org/10.52842/conf.caadria.2006.x.i3p
summary	Education is taking a new shape for the emerging needs of society. A considerable number of schools and disciplines are adapting active and cooperative learning to foster critical thinking and cognitive skill gaining. Design computation discipline also has to search for new models in education and experiment with these to evolve. This paper presents the current status in other disciplines. The lessons learned are used to develop the Academic Apprenticeship Model for teaching design computation courses.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2006_e090b
id	sigradi2006_e090b
authors	Hanna, Sean and Turner, Alasdair
year	2006
title	Teaching parametric design in code and construction
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 158-161
summary	Automated manufacturing processes with the ability to translate digital models into physical form promise both an increase in the complexity of what can be built, and through rapid prototyping, a possibility to experiment easily with tangible examples of the evolving design. The increasing literacy of designers in computer languages, on the other hand, offers a new range of techniques through which the models themselves might be generated. This paper reviews the results of an integrated parametric modelling and digital manufacturing workshop combining participants with a background in computer programming with those with a background in fabrication. Its aim was both to encourage collaboration in a domain that overlaps both backgrounds, as well as to explore the ways in which the two working methods naturally extend the boundaries of traditional parametric design. The types of projects chosen by the students, the working methods adopted and progress made will be discussed in light of future educational possibilities, and of the future direction of parametric tools themselves. Where standard CAD constructs isolated geometric primitives, parametric models allow the user to set up a hierarchy of relationships, deferring such details as specific dimension and sometimes quantity to a later point. Usually these are captured by a geometric schema. Many such relationships in real design however, can not be defined in terms of geometry alone. Logical operations, environmental effects such as lighting and air flow, the behaviour of people and the dynamic behaviour of materials are all essential design parameters that require other methods of definition, including the algorithm. It has been our position that the skills of the programmer are necessary in the future of design. Bentley’s Generative Components software was used as the primary vehicle for the workshop design projects. Built within the familiar Microstation framework, it enables the construction of a parametric model at a range of different interfaces, from purely graphic through to entirely code based, thus allowing the manipulation of such non-geometric, algorithmic relationships as described above. Two-dimensional laser cutting was the primary fabrication method, allowing for rapid manufacturing, and in some cases iterative physical testing. The two technologies have led in the workshop to working methods that extend the geometric schema: the first, by forcing an explicit understanding of design as procedural, and the second by encouraging physical experimentation and optimisation. The resulting projects have tended to focus on responsiveness to conditions either coded or incorporated into experimental loop. Examples will be discussed. While programming languages and geometry are universal in intent, their constraints on the design process were still notable. The default data structures of computer languages (in particular the rectangular array) replace one schema limitation with another. The indexing of data in this way is conceptually hard-wired into much of our thinking both in CAD and in code. Thankfully this can be overcome with a bit of programming, but the number of projects which have required this suggests that more intuitive, or spatial methods of data access might be developed in the future.
keywords	generative design; parametric model; teaching
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ddss2006-hb-419
id	DDSS2006-HB-419
authors	Hung-Ming Cheng
year	2006
title	Generative Design in an Evolutionary Procedure - An approach of genetic programming
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 419-431
summary	This study describes a procedural design studio using Genetic Programming as the evolutionary mechanism and formal generation. This procedural design is integrated with a visualisation interface, which allows designers to interact and select from instances for design evolution. Evolutionary design facilitates designers in three areas: 1) diversify instances of design options; 2) inspect specific goals; 3) and enhance the possibility of discovering various potential solutions.
keywords	Artificial intelligent, Genetic algorithm, Generative design tools, Procedural design studio, Design exploration
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2006_151
id	caadria2006_151
authors	IH-CHENG LAI
year	2006
title	AGENT COMMUNICATION FOR ROLE PLAYING IN THE IDEA ASSOCIATION PROCESS
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 151-160
doi	https://doi.org/10.52842/conf.caadria.2006.x.t3c
summary	This paper proposes a framework for the specification of communication mechanisms that regulates interactions among agents participating in role playing in the idea association process. Since agents process a sort of human-like behavior, our approach is made taking as reference human communication characteristics through using role playing as metaphor. Therefore, we first analyze the characteristics of human communication, deriving role playing for linking ideas in the human world. By integrating with ACL mechanisms, we propose a framework to express communication mechanisms for exchanging message in a multi-agent framework called DIM-2. Finally, the framework is evaluated through an experiment. Also its computational feasibility of a support system for the distributed interactions is discussed in this paper.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	2006_014
id	2006_014
authors	Iordanova, Ivanka; Lorna Heaton and Manon Guité
year	2006
title	Architectural Design Spaces and Interpersonal Communication-Changes in Design Vocabulary and Language Expression
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 14-21
doi	https://doi.org/10.52842/conf.ecaade.2006.014
summary	This paper addresses communication during the design process and the mutations it may undergo depending on the medium of design. Three experimental observations were held with students in the context of architectural digital design studios. Each of them was performed when the students were working on a design problem, in groups of two or three, with different design mediums: cardboard mock-up or modeling software with one or two mice used for interaction with the computer. The methodology used for analysing the recorded video and graphical data is based on previous research work in the domains of collaborative communication as well as in the domain of design. It combines purely qualitative interpretation with graphical linkographic analysis. A software prototype was developed in order to allow for an interactive category assignment, exploration and interaction. Gesture, verbal language and design space are studied in order to determine their dependence on the medium and the eventual impact this might have either on the design process or on the object being designed.
keywords	Design communication; education; gesture
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia06_510
id	acadia06_510
authors	Johnson, Jason
year	2006
title	Complexity as a Creative Force in Design Variegation, Heterogeneity, Diversity
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 510-517
doi	https://doi.org/10.52842/conf.acadia.2006.510
summary	This paper describes an experimental project that attempts to use complexity as a creative and vital force within the design process. The project seeks to release architecture from its conventional role as a static urban backdrop and to transform it into a vital, dynamic, and active participant within cities. The project, entitled “Energy Farm”, was instigated by the 2005 International Open Design Competition for a “Performing Arts Island” located within the Han River in Seoul, Korea. Through the exploration of the site and program elements as an interacting matrix of fields, forces, and flows (energy, program, water flow, infrastructure, etc.), our proposal emerged as a variegated landscape marked by its capacities to produce its own energy, interweave heterogeneous threads of structure and program, and instigate a diverse set of scenarios in which physical and virtual realms coalesce. Architecture, in its unique capacity to bridge these realms, can release the rich computation potential of complexity into the physical realm. Within this scenario, architecture becomes a creative and vital agent for productive change with profound social, political, and ecological implications.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	2006_066
id	2006_066
authors	Kalisperis, Loukas N.; Katsuhiko Muramoto; Bimal Balakrishnan; Dragana Nikolic and Nevena Zikic
year	2006
title	Evaluating Relative Impact of Virtual Reality System Variables on Architectural Design Comprehension and Presence - A variable-centered approach using fractional factorial experiment
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 66-73
doi	https://doi.org/10.52842/conf.ecaade.2006.066
summary	The relative contributions of five variables (Stereoscopy, screen size, field of view, level of realism and level of detail) of virtual reality systems on spatial comprehension and presence are evaluated here. Using a variable-centered approach instead of an object-centric view as its theoretical basis, the contributions of these five variables and their two-way interactions are estimated through a 25-1 fractional factorial experiment (screening design) of resolution V with 84 subjects. The experiment design, procedure, measures used, creation of scales and indices, results of statistical analysis, their meaning and agenda for future research are elaborated.
keywords	Virtual reality system variables - stereoscopy; screen size; field of view; level of realism; level of detail; spatial comprehension; presence; variable-centered approach; fractional factorial experiment design
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: