Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	acadia06_496
id	acadia06_496
authors	Jemtrud, Michael
year	2006
title	Eucalyptus: User Controlled Lightpath Enabled Participatory Design Studio
doi	https://doi.org/10.52842/conf.acadia.2006.496
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 496-509
summary	A new notion of participation is at stake with advances in technologically mediated work environments. The digitally mediated e-design studio has been around since the mid-1990’s and has been employed in various forms in disciplines including architecture/engineering/construction (AEC), industrial design, and the automotive industry. Insufficient bandwidth and insufficiently powerful, crudely coordinated tools resulted in distributed task-based modes of collaboration that did not allow full participation by members of the distributed design team. At the very least, the present “second generation” network severely limits the applications, tools, and modes of communication that can be used in data and visualization intense design scenarios. The emergence of Service Oriented Architectures and User-Controlled LightPaths (“intelligent infrastructure”) herald the beginning of a new age where fully participatory multi-site design may become possible. The networks, visualization & communication tools, Service Oriented Architecture & Web Services, work protocols, and physical site designs of the Participatory Design Studio (PDS) being developed by the authors will constitute one of the first working examples of this future. This paper will briefly outline the “mise en scène” or staging of the technical configuration of the Eucalyptus project; observations and results from the creative activity of the PDS in the context of two case studies; and speculate on the implications for design activity, pedagogy, and a more robust mode of participation.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	2006_464
id	2006_464
authors	Mullins, Michael; Tadeja Zupancic, Christian Kühn, Paul Coates and Orhan Kipcak
year	2006
title	V I PA: A virtual campus for virtual space design
doi	https://doi.org/10.52842/conf.ecaade.2006.464
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 464-469
summary	The conceptual design of virtual spaces is creating new places in which to live and work. In consequence, new opportunities for work and employment are opening up for architects as well as for architectural educators. In response to this challenge, VIPA, a transnational virtual campus is currently being developed; it contains an e-learning and research platform for European architectural schools with a focus on virtual space design. The virtual campus integrates administrative, curricular, and communicative infrastructures, interactive, multimedia 3-D contents, and pedagogical considerations in respect of the aims, content and technologies employed. Virtual campuses are already established at most universities in the European Community, yet surprisingly e-learning is not yet widespread in architectural schools in Europe. E-learning is arguably still in an initial research phase; although there are best practice examples where e-learning is already replacing traditional study forms in other teaching disciplines. However, it has been found that although all the universities involved in the VIPA project have been involved in e-learning projects for many years, there is a considerable resistance to e-learning as being equally effective as traditional face-to-face studio teaching. Given the new virtual conditions of space design however, new contexts for learning are increasingly relevant. University curricula have developed out of local competencies, networks of teachers and researchers. These local factors need to be woven into the fabric of a transnational VIPA curriculum and supported with organizational layout, platform, user interfaces and their features. Participants will offer existing courses in virtual space design, as well as developing new ones. This offers the option for both present and future participants to adjust the VIPA courseware to suit local curricula demands, while offering a large range of courses and knowledge. An additional feature of VIPA is thus as a platform for curricula development in virtual space design. The paper reports on the VIPA project’s aims, pedagogical problems, solutions, course content and methods; it will describe prototype results from participating universities and include perspectives on its future application.
keywords	Architectural Education; E-Learning; Virtual Space
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ddss2006-pb-185
id	DDSS2006-PB-185
authors	O.T.J. Devisch, H.J.P. Timmermans, T.A. Arentze, and A.W.J. Borgers
year	2006
title	Modelling Residential Search and Location Choice - Framework and Numerical Experiments
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 185-200
summary	People only move a limited number of times during their lifetime. Factors such as high financial costs, local social networks, emotional bounds, etc. make that people typically postpone this decision as long as possible, up to the point where the benefit of alternative housing outperforms all these factors. Then things generally have to go fast. This combination of time-pressure, high costs and lack in experience turn residential search and location choice into a complex decision process. This paper presents a model developed to grasp some of this complexity. Households are approached as autonomous decision-makers continuously evaluating whether to search for information, to visit houses for inspection, to start negotiating with the owner of a house for sale or to do nothing and stay in the current house. Households make these evaluations on the basis of beliefs regarding their environment and update these beliefs each time they collect new information on this environment.
keywords	Microsimulation, Spatial simulation models, Strategic decision-making, State dependent behaviour, Belief-updating
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2006_217
id	caadria2006_217
authors	KILIAN, AXEL
year	2006
title	DESIGN EXPLORATION WITH CIRCULAR DEPENDENCIES: A chair design experiment
doi	https://doi.org/10.52842/conf.caadria.2006.x.q2e
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 217-226
summary	The paper demonstrates the need for advanced models of representation for circular dependency networks common in design problems that deal with multiple constraints. Constraints in a design problem are generally perceived as limitations to design exploration. The careful construction of constraint relationships can help to turn constraints into design drivers for the problem instead. Closely related to the notion that new goals may emerge from creating designs is the idea that one goal of planning may be the design activity itself (Simon 1981). The interplay of many constraints can lead to circular dependencies that make design exploration a challenge as any change causes ripples throughout the entire design construct. D’Arcy Thompson (1942) describes form as a diagram of forces. The construction of design representations that reflect such dependency networks pose a challenge and are far from exact matches of the task environment (Simon 1981). The paper proceeds in mapping these abstract observations of the circular dependencies in the design process to a chair experiment from design to fabrication giving detailed descriptions of the interdependencies of material, fabrication and aesthetic constraints. The experiment shows how those constraints were instrumental in achieving the aesthetics of the full scale prototype.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	2006_168
id	2006_168
authors	Papalexopoulos, Dimitris
year	2006
title	Digital Territories and the Design Construction Continuum
doi	https://doi.org/10.52842/conf.ecaade.2006.168
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 168-174
summary	The purpose of the paper is to bring together the two newly elaborated concepts of Digital Territories (DT) and Design Construction Continuum (DCC) in order to approach the design of evolving – intelligent environments.Digital Territories is a concept elaborated 2005 by a Core Expert Group, conceived as an ephemeral Ambient Intelligence (AmI) space. DTs formed through the interconnection of physical objects embedding digital technologies, postulate the integration of the physical and the digital world, searching for operative definitions of new evolving in time functionalities. In DT’s, bridges between the physical and the digital are discrete elements disposing of certain autonomy in their conception and internal structure. Bridges have to be designed and located. The DCC proposes to relate design, fabrication and construction through information networks (it is in fact a DT). Through the DCC approach, design information is becoming construction information and industrial fabrication information. The DCC has to integrate interaction design and respond to questions posed by DTs design. DTs are integrated to DCC by constituting an intermediate level between building programming and design. Intelligent Building Components, that is AmI components operating as bridges between the physical and the digital in Digital Territories formations, cooperating to develop swarm intelligence applications to architectural space, are elements managed by the DCC. DT’s are about spaces communicating and the DCC is about communicating (design) space.
keywords	Digital Territories; Design Construction Continuum; Interaction Design; Evolving Environments; Intelligent Environments; Location Diagrams; Building Programming
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2006_e133e
id	sigradi2006_e133e
authors	Skinner, Martha
year	2006
title	Immersive Mappings in Audio/Video and Installation
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 451-455
summary	Architecture, spaces, cities… are not static but rather dynamic and ever changing entities. The city, which is composed of activities, interactions, patterns of use, changes, is dynamic and temporal. As James Corner states in The Agency of Mapping: Speculation, Critique and Invention; “The experiences of space cannot be separated from the events that happen in it” (1). Mapping practices, which have evolved from the experiential to the pictorial to the mathematical and abstract, more often have failed to combine these various important aspects which describe a place. Michel de Certeau in Walking the City argues that the plan-like image of a city as seen from above is nothing else but a “viewpoint… a picture, whose condition of possibility is an oblivion and a misunderstanding of practices”. He argues for the experience of wandering through the city as a “process of appropriation of the topographical system” (2). In my work and the work of my students, the audio/video camera has been employed as a medium with which to combine the various characteristics that make up place. It has been important to be both immersed as well as removed, to be both realistic and abstract, to be picturesque and analytical. In addition, we have experimented with the merging of two vocabularies: that of architectural drawing and that of moving image as a way to rediscover both vocabularies and as a way to achieve readings of place that are both qualitative and quantitative. In this essay, various mappings and notations of cities done through the exploitation of the audio/video camera as a mapping medium will be introduced.
keywords	mapping; representation; tools and methods; temporality
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ascaad2006_paper15
id	ascaad2006_paper15
authors	Anz, Craig and Akel Ismail Kahera
year	2006
title	Critical Environmentalism and the Practice of Re-Construction
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This research focuses on the implications and applications of “critical environmentalism” as a quintessential epistemological framework for urban interventions while implementing digital applications that foster collective, round-table approaches to design. Essentially centering the environment (Umwelt) as an encompassing and interconnecting catalyst between multiple disciplines, philosophies, and modes of inquiry and technologies, the framework reciprocally fosters individual and critical identities associated with particular places, belief systems, and their participants as a primary concern. Critical environmentalism promotes a comprehensive, reciprocally unifying epistemological framework that can significantly inform architectural interventions and the tethered use of its technologies in order to foster increased vitality and a certain coinvested attention to the complexities of the greater domain. Grounding the theory in pedagogical practice, this paper documents an approach to urban design and architectural education, implemented as a case-study and design scenario, where divergent perspectives amalgamate into emergent urban configurations, critically rooted in the conditional partialities of place. Digital technologies are incorporated along with analogical methods as tools to integrate multiple perspectives into a single, working plane. Engaging the above framework, the approach fosters a critical (re)construction and on-going, co-vested regeneration of community and the context of place while attempting to dialogically converge multiple urban conditions and modes-of-thought through the co-application of various digital technologies. Critically understanding complex urban situations involves dialogically analyzing, mapping, and modeling a discursive, categorical structure through a common goal and rationale that seeks dialectic synthesis between divergent constructions while forming mutual, catalyzing impetuses between varying facets. In essence, the integration of varying technologies in conjunction, connected to real world scenarios and a guiding epistemic framework cultivates effective cross-pollination of ideas and modes through communicative and participatory interaction. As such it also provides greater ease in crosschecking between a multitude of divergent modes playing upon urban design and community development. Since current digital technologies aid in data collection and the synthesis of information, varying factors can be more easily and collectively identified, analyzed, and then simultaneously used in subsequent design configurations. It inherently fosters the not fully realized potential to collectively overlay or montage complex patterns and thoughts seamlessly and to thus subsequently merge a multitude of corresponding design configurations simultaneously within an ongoing, usable database. As a result, the pedagogical process reveals richly textured sociocultural fabrics and thus produces distinct amplifications in complexity and attentive management of diverse issues, while also generating significant narratives and themes for fostering creative and integrative solutions. As a model for urban community and social development, critical environmentalism is further supported the integrative use of digital technologies as an effective means and management for essential, communicative interchange of knowledge and thus rapprochement between divergent modes-of-thought, promoting critical, productive interaction with others in the (co)constructive processes of our life-space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2006_e183a
id	sigradi2006_e183a
authors	Costa Couceiro, Mauro
year	2006
title	La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary	The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords	evolutionary computation; genetic architectures; artificial/natural intelligence
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	acadia06_304
id	acadia06_304
authors	Dorta, T., Perez, E.
year	2006
title	Immersive Drafted Virtual Reality a new approach for ideation within virtual reality
doi	https://doi.org/10.52842/conf.acadia.2006.304
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 304-316
summary	There is a void between design and computer in ideation. Traditional tools like sketching are more appropriate for conceptual design since they can sustain abstraction, ambiguity, and inaccuracy—essentials at the beginning of the design process. Actual graphical user interface approaches, as well as hardware devices, constrain creative thinking. Computer representations and virtual reality are now used for presentation and validation rather than for design. Most virtual reality tools are seen as passive rather than active instruments in this process of ideation. Moreover, virtual reality techniques come from other disciplines and are applied to design without considering the design process itself and the skills designers already possess.This paper proposes and evaluates a new approach for the conceptual design of spaces within virtual reality. Starting from the non-immersive technique we developed before, where the user was able to be inside a 3D modeled space through real sketches, this technique goes one step further, allowing the designer to sketch the space from the inside all in real-time. Using an interactive pen display for sketching and an immersive projective spherical display, designers and colleagues are able to propose and make design decisions from inside the project. The capabilities of the computer to display the virtual environment are, therefore, mixed with the designer’s skills in sketching and understanding the space.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	acadia06_542
id	acadia06_542
authors	Faulders, Thom
year	2006
title	Airspace Tokyo
doi	https://doi.org/10.52842/conf.acadia.2006.542
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 542-543
summary	Airspace Tokyo is designed to establish a screened buffer zone - a thin, super-compact artificial “yard” that protects the building’s occupants from the pressing context of the dense urban environment outside. The new white, minimalist four-story building, designed by a Tokyo architect, is a stacked four unit multi-family dwelling with a garage and two large professional photography studios for lease on its ground floor. Located in the Ota-ku area of the city, the site was previously occupied by the owner with a sprawling residence that was wrapped by a layer of dense vegetation, and was unique in a city where open space is rare amidst the high demand for built space. Since the entire site is to now be razed to accommodate construction for the new and much larger development, the design intention for the screen is to invent an architectural system that performs with similar attributes to the demolished green strip and creates an atmospheric zone of protection. In effect, the demolished two meters of setback width of open ground space is now to be reduced into a new zone with a width of only 20 cm.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2006_904
id	2006_904
authors	Gurer, Ethem and Gulen Cagdas
year	2006
title	A Multi-Level Fusion of Evolutionary Design Processes
doi	https://doi.org/10.52842/conf.ecaade.2006.904
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 904-907
summary	Evolutionary design methodologies generally aim to present new form-finding processes, where nature-based approaches are used, such as self-organization, genetic algorithms etc. This paper aims to present a new architectural design approach that focuses on integrating these different evolutionary methods in an emergent process. The main goal is to achieve a high-level of integration where lacking qualities of each evolutionary method are completed by the other one in a synergic and especially emergent behavior.
keywords	Evolutionary design; morphogenetic; self-organization; emergence
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2006_e090b
id	sigradi2006_e090b
authors	Hanna, Sean and Turner, Alasdair
year	2006
title	Teaching parametric design in code and construction
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 158-161
summary	Automated manufacturing processes with the ability to translate digital models into physical form promise both an increase in the complexity of what can be built, and through rapid prototyping, a possibility to experiment easily with tangible examples of the evolving design. The increasing literacy of designers in computer languages, on the other hand, offers a new range of techniques through which the models themselves might be generated. This paper reviews the results of an integrated parametric modelling and digital manufacturing workshop combining participants with a background in computer programming with those with a background in fabrication. Its aim was both to encourage collaboration in a domain that overlaps both backgrounds, as well as to explore the ways in which the two working methods naturally extend the boundaries of traditional parametric design. The types of projects chosen by the students, the working methods adopted and progress made will be discussed in light of future educational possibilities, and of the future direction of parametric tools themselves. Where standard CAD constructs isolated geometric primitives, parametric models allow the user to set up a hierarchy of relationships, deferring such details as specific dimension and sometimes quantity to a later point. Usually these are captured by a geometric schema. Many such relationships in real design however, can not be defined in terms of geometry alone. Logical operations, environmental effects such as lighting and air flow, the behaviour of people and the dynamic behaviour of materials are all essential design parameters that require other methods of definition, including the algorithm. It has been our position that the skills of the programmer are necessary in the future of design. Bentley’s Generative Components software was used as the primary vehicle for the workshop design projects. Built within the familiar Microstation framework, it enables the construction of a parametric model at a range of different interfaces, from purely graphic through to entirely code based, thus allowing the manipulation of such non-geometric, algorithmic relationships as described above. Two-dimensional laser cutting was the primary fabrication method, allowing for rapid manufacturing, and in some cases iterative physical testing. The two technologies have led in the workshop to working methods that extend the geometric schema: the first, by forcing an explicit understanding of design as procedural, and the second by encouraging physical experimentation and optimisation. The resulting projects have tended to focus on responsiveness to conditions either coded or incorporated into experimental loop. Examples will be discussed. While programming languages and geometry are universal in intent, their constraints on the design process were still notable. The default data structures of computer languages (in particular the rectangular array) replace one schema limitation with another. The indexing of data in this way is conceptually hard-wired into much of our thinking both in CAD and in code. Thankfully this can be overcome with a bit of programming, but the number of projects which have required this suggests that more intuitive, or spatial methods of data access might be developed in the future.
keywords	generative design; parametric model; teaching
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	2006_262
id	2006_262
authors	Ibrahim, Magdy
year	2006
title	To BIM or not to BIM, This is NOT the Question - How to Implement BIM Solutions in Large Design Firm Environments
doi	https://doi.org/10.52842/conf.ecaade.2006.262
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 262-267
summary	Building information modeling is the technology that is converting the workplace in design firms. The initial resistance to applying the concept has faded due to many reasons. Professional architects now see the feasibility and benefits of using the new technology. CAD managers in design firms are working toward the implementation of BIM packages in order to eventually, replace the conventional CAD platforms that are still widely used. However, there are still internal obstacles that slow down the process of the implementation. The change in the project management and the required proper training for the conversion are the two major internal obstacles. The current well organized work flow tailored around the conventional CAD platforms has to be changed in a way suitable for the new technology. The training firms provide for their employees should also be re-structured in a more vertical organization in order to guarantee that everyone understands the new concept and the new work flow. Architectural education usually reflects the needs of the work market. It is very important to understand the needs and identify the directions where the architectural education should go. What do we expect from newly graduated architects? How should we shift the focus toward BIM based CAD in design schools? And, what does it mean to teach modeling versus teaching drafting?
keywords	Computer Aided Drafting; Building Information Modeling; Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2006_486
id	2006_486
authors	Jemtrud, Michael; Martin Brooks; Bobby Ho; Sandy Lui; Philam Nguyen; John Spence and Bruce Spencer
year	2006
title	Intelligent Infrastructure Enabled Participatory Design Studio - Eucalyptus: Collaborating at the speed of light
doi	https://doi.org/10.52842/conf.ecaade.2006.486
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 486-493
summary	A new notion of participation is at stake with advances in technologically mediated work environments. Insufficient bandwidth and insufficiently powerful, crudely coordinated tools resulted in distributed task-based modes of collaboration that did not allow full participation by members of the distributed design team. The emergence of Service Oriented Architectures and User-Controlled LightPaths (“intelligent infrastructure”) herald the beginning of a new age where fully participatory multi-site design may become possible. This paper will briefly outline the “mise en scène” or staging of the technical configuration of the Eucalyptus project; observations and results from the creative activity of the PDS in the context of two case studies; and speculate on the implications for design activity, pedagogy, and a more robust mode of participation.
keywords	participatory design studio; e-design; SOA; architectural design education; design methods; dashboard
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2006_000
id	caadria2006_000
authors	Kaga, Atsuko; Naka, Ryusuhe (eds.)
year	2006
title	CAADRIA '06
doi	https://doi.org/10.52842/conf.caadria.2006
source	Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia (ISBN 4-907662-01-7 / Kumamoto, Japan) March 30th - April 2nd 2006, 649 p.
summary	It is apparent that recent development of digital technology has shifted the paradigm of the socio-economic system of the world as well as the style of day-to-day communication in our lives, as professor Mitchell suggested in his book. In the field of architecture, there have been many prospective studies on the development and applications of digital technology to architectural design practice and education. However, the reactions of the architecture community to such technological development have been slower and weaker than researchers initially expected. Is this because developed technology has overlooked some of essential needs of the community while seeking tasks for itself or because present technology is still insufficiently developed to attract people to new ideas? One of Japan's great samurai sword masters, Musashi Miyamoto, spent the last years of his life in Kumamoto where he wrote The Book of Five Rings. The most important element of his work was his concept of rhythm and harmony; how all things are in harmony, and how by working with the rhythm of a situation we can turn it to our advantage with little effort. The conference aims to provide the participants with an opportunity to explore visions and ideas on the digital technology that could enhance Rhythm and Harmony in architectural design practice and education.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ascaad2006_paper12
id	ascaad2006_paper12
authors	Katodrytis, George
year	2006
title	The Autopoiesis and Mimesis of Architecture
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	The use of digital technology in architecture has proven to be more assertive than originally thought: it has reconditioned the nature of the design process, and established new practices and techniques of fabrication. The 21st century began with the technology of art. There is a new responsiveness to the reading and understanding of digital space, which is characterized by complexity and the uncanny. Recent applications in digital technology show inquisitiveness in the contentious subject Genetic Algorithms. This new architectural process is characterized by two main shifts: from poiesis (or poetry) to autopoiesis, and from authenticity to mimesis. Since evolutionary simulations give rise to new forms rather than design them, architects should now be artists and operators of both Inventive and Systematic design. Inventive design: The digital media should bring about poiesis (poetry). Digital spaces reveal and visualize the unconscious desires of urban spaces and bring forth new dreamscapes, mysterious and surreal. This implies a Freudian spatial unconscious, which can be subjected to analysis and interpretation. “Space may be the projection or the extension of the physical apparatus”, Freud noted1. Space is never universal, but subjective. A space would be a result of introjection or projection – which is to say, a product of the thinking and sensing subject as opposed to the universal and stable entity envisaged since the Enlighten. There is a spatial unconscious, susceptible to analysis and interpretation. Systematic Design: Digital media should bring about an autopoiesis. This approach calls into question traditional methods of architectural design – which replace the hierarchical processes of production known as “cause and effect” - and proposes a design process where the architect becomes a constructor of formal systems. Will the evolutionary simulation replace design? Is metric space dead? Is it replaced by the new definition of space, that of topology? The new algorithmic evolutionary conditions give architecture an autopoiesis, similar to biological dynamics. The use of algorithms in design and fabrication has shifted the role of the architect from design to programming. Parametric design has introduced another dimension: that of variation and topological evolution, breaking the authentic into the reused. Architecture now is about topology than typology, variation than authenticity, it is mimetic than original, uncanny and subconscious than merely generic. In a parallel universe, which is both algorithmic and metaphysical, the modeling machine creates a new abstraction, the morphogenesis of the “new hybrid condition”. The emphasis of the exploration is on morphological complexity. Architecture may become – paradoxically - rigorous yet more uncanny and introverted.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2006_paper4
id	ascaad2006_paper4
authors	Kouider, Tahar
year	2006
title	Evolution or Revolution: is digital conceptual design the way forward for Architects?
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This research investigates architectural conceptual design and discusses its recent historical, philosophical and theoretical development within the overall architectural design process and attempts to establish an objective definition more tuned to current thinking and advancement in technology. It also evaluates the various traditional and information technology (IT) tools available to the designer and establishes their relationship to the conceptual design process in order to identify if any of these tools, in particular the IT tools, have a role to play in the practice and the enhancement of the conceptual design process. A survey of Scottish practicing architects (small to medium size practices) was undertaken to validate the results of the investigation. The results seem to suggest that IT tools are not essential to the conceptual design process but that they are very well capable of enhancing the creativity and speed of some aspects of it. They also suggest the existence of an inherent resistance amongst Architects / designers to utilising these tools in conceptual design. It is, furthermore, identified that if practitioners were to encompass new working practices and acquire new skills, IT tools could also provide powerful new modes of communication with the client. A correlation between the size of the practice and the degree of exposure and experience of IT tools was also established. To test some of the above findings, a design studio experiment was undertaken where half of the students adopted digital tools, utilising SketchUp software and digital sketchpads, whilst the others adopted traditional tools for the conceptual design part of their projects. No attempt was made to gauge the quality of the actual designs produced. The results indicate that the SketchUp group rated their conceptual design experience higher in terms of efficiency, flexibility and communication. The control group, who had dominantly adopted traditional freehand sketching, were impressed by the outcome from the SketchUp group. All student who answered the questionnaire, both SketchUp and control groups, said they would consider adopting some form of 3D sketching in the future.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddss2006-pb-153
id	DDSS2006-PB-153
authors	Linda Ma, Theo Arentze, Aloys Borgers, and Harry Timmermans
year	2006
title	A Multi-Agent Model for Generating Local Land-Use Plans in the Context of an Urban Planning Support System
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 153-168
summary	In a multi-player urban planning process, the outcome of any individual decision of the actors is uncertain until a state where the plan is satisfactory for all. To support the plan generation phase, this paper develops a generic multi-agent system, in which agents represent particular land-uses. In the system, agents higher in the hierarchy have priority over agents lower in the hierarchy to claim units of land. This one-direction claim process may result in a plan that is not optimal for every agent. The system, therefore, allows agents to revise their plans in an iterative procedure. A case study illustrates centralized, semi-centralized and decentralized solutions for a plan area based on the outcomes of different strategies used by facility agents (retail, green, schools) and a housing agent. The results show that the proposed system is able to generate rational and realistic plan alternatives for new residential areas.
keywords	Multi-agent system, Planning support system, Plan alternative, Land use planning
series	DDSS
last changed	2006/08/29 12:55

_id	73ae
id	73ae
authors	Loemker, Thorsten Michael
year	2006
title	Revitalization of Existing Buildings through Sustainable Non-Destructive Floor Space Relocation
source	GBEN 2006, Global Built Environment Network: Towards an Integrated Approach for Sustainability, P. 181-189
summary	The revitalisation of existing buildings is getting more and more important. We are facing a situation where in many cases there is no need to design new buildings because an increasing number of existing buildings is not used anymore. The most ecological procedure to revitalise these buildings would be through a continuous usage and by making few or no alterations to the stock. Thus, the modus operandi could be named a “non-destructive” approach. From the architects’ point of view, non-destructive redesign of existing buildings is time-consuming and complex. The methodology we developed to aid architects in solving such tasks is based on exchanging or swapping utilisation of specific rooms to converge in a design solution. With the aid of mathematical rules, which will be executed by the use of a computer, solutions to floor space relocation problems will be generated. Provided that “design” is in principle a combinatorial problem, i.e., a constraint-based search for an overall optimal solution of a problem, an exemplary method will be described to solve such problems.
keywords	Revitalisation, Optimisation, Floor Space Relocation, Constraint Programming
series	other
type	normal paper
email
last changed	2008/10/13 13:57

_id	acadia06_261
id	acadia06_261
authors	Lömker, Thorsten M.
year	2006
title	Revitalization of Existing Buildings through Sustainable Non-Destructive Floor Space Relocation
doi	https://doi.org/10.52842/conf.acadia.2006.261
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 261-268
summary	The revitalization of existing buildings is gaining importance. We are facing a development where, in many cases, there is no need to design new buildings because an increasing number of existing buildings are not used anymore. The most ecological procedure to revitalize these buildings would be through a continued usage and by making few or no alterations to the stock. Thus, the modus operandi could be called a “non-destructive” approach.From the architect’s point of view, non-destructive redesign of existing buildings is time-consuming and complex. The methodology we developed to aid architects in solving such tasks is based on exchanging or swapping utilization of specific rooms in order to reach a design solution. With the aid of mathematical rules, which will be executed by the use of a computer, solutions to floor space relocation problems will be generated. Provided that “design” is in principle a combinatorial problem, i.e., a constraint-based search for an overall optimal solution of a problem, an exemplary method will be described to solve such problems.The design of the model developed is related to problems in logistics (e.g., the loading in trans-shipment centers). The model does not alter geometric proportions or locations of rooms, but solely changes their occupancy such that a new usage could be applied to the building. From our point of view, non-destructive models can play an important role in floor space relocation processes. Our examinations demonstrate that new patterns of utilization could be found through the use of this model.
series	ACADIA
email
last changed	2022/06/07 07:59

For more results click below: