Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 421

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2006_e185d
id	sigradi2006_e185d
authors	Geva, Anat and Mukherji, Anuradha
year	2006
title	The Holy Darkness: A Study of Light in Brihadeshvara Hindu Temple, in Tanjore, Tamilnadu, India (1010 AD)
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 425-428
summary	The study investigates how religious principles govern the treatment of light/darkness in sacred monument. Specifically, a digitized daylight simulation is used in the analysis of Brihadeshvara Hindu Temple, built in 1010 AD in Tanjore, Tamilnadu, India. This sacred monument, listed as one of UNESCO's World Heritage Sites, is an intriguing case study since the treatment of the 'holy light' in the temple is the treatment of the 'holy darkness'.In spite of the importance given to sun in ancient Hindu scriptures, natural light was used very sparsely in Hindu temples. According to Hindu religious belief, when a worshipper is in the presence of the divine, there should be nothing to distract his/her senses (including vision). Therefore, the innermost sanctum is shrouded in total darkness and the progression into the temple is a ritual movement where the devotee goes through the dynamic experience of the darkening spaces of the temple before reaching the dark sacred chamber (see Fig.1). The dictation of the Hindu faith to create this spiritual procession toward the 'holy darkness' is examined in the historic Brihadeshvara Temple by using Lightscape -- computerized lighting simulation software. To run the program, a 3-D CAD surface model of the temple was created and imported into Lightscape. Then the model was assigned materials and its openings and lighting systems were defined. The simulations were run on four interior horizontal (floor) and vertical (walls) surfaces, along four spaces of the procession in the temple. The simulation targeted three time frames: sunrise, sunset and at high noon on March 21st (the equinox). The location of Tanjore, India was used for light conditions. The Lightscape simulations used the process of radiosity to generate single frame daylight renderings along with light analysis of each surface. A lighting animation was then produced in Quick Time.The results of this analysis demonstrate that the average illumination values for specific surfaces of the temple along the procession sequence correspond to the schematic expectation depicted in Figure 1, i.e., a progressively decreased luminance towards the dark innermost chamber. Furthermore, the simulated values were compared to the Illuminating Engineering Society (IES) standards, which recommend ranges of luminance for specific visual tasks and areas. The comparisons showed that the average luminance in the temple, from the illuminated entrance in the east to the darker chamber in the west, is lower than the IES standards for 'public places with dark surroundings' for 'short temporary visits'. Finally, a morphological analysis of the temple along accepted daylight design guidelines corroborated the previous findings. The multi-method investigation of the relationship of light and darkness, light and objects, and the designated light quality in the Brihadeshvara Temple demonstrates the strong influence of the specific dictum of Hinduism on the light/darkness treatment in the temple. The paper concludes that digitized media such as computerized daylight simulations can examine the significance of light/darkness in sacred monuments as a spiritual experience. This quantitative investigation can augment the qualitative studies in the field of historic sacred architecture.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ascaad2006_paper8
id	ascaad2006_paper8
authors	Abdullah, Sajid; Ramesh Marasini and Munir Ahmad
year	2006
title	An Analysis of the Applications of Rapid Prototyping in Architecture
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	Rapid prototyping (RP) techniques are widely used within the design/manufacturing industry and are well established in manufacturing industry. These digital techniques offer quick and accurate prototypes with relatively low cost when we require exact likeness to a particular scale and detail. 3D modeling of buildings on CAD-systems in the AEC sector is now becoming more popular and becoming widely used practice as the higher efficiency of working with computers is being recognized. However the building of scaled physical representations is still performed manually, which generally requires a high amount of time. Complex post-modernist building forms are more faithfully and easily represented in a solid visualization form, than they could be using traditional model making methods. Using RP within the engineering community has given the users the possibility to communicate and visualize designs with greater ease with the clients and capture any error within the CAD design at an early stage of the project or product lifecycle. In this paper, the application of RP in architecture is reviewed and the possibilities of modeling architectural models are explored. A methodology of developing rapid prototypes with 3D CAD models using methods of solid freeform manufacturing in particular Fused Deposition Modeling (FDM) is presented and compared against traditional model making methods. An economical analysis is presented and discussed using a case study and the potential of applying RP techniques to architectural models is discussed.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	fcb4
id	fcb4
authors	Loemker, Thorsten Michael
year	2006
title	Solving Revitalization-Problems by the Use of a Constraint Programming Language
source	IKM 2006, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, July 2006
summary	This research focuses on an approach to describe principles in architectural layout planning within the domain of revitalization. With the aid of mathematical rules, which are executed by a computer, solutions to design problems are generated. Provided that “design” is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a problem, an exemplary method will be described to solve such problems in architectural layout planning. To avoid conflicts relating to theoretical subtleness, a customary approach adopted from Operations Research has been chosen in this work [1]. In this approach, design is a synonym for planning, which could be described as a systematic and methodical course of action for the analysis and solution of current or future problems. The planning task is defined as an analysis of a problem with the aim to prepare optimal decisions by the use of mathematical methods. The decision problem of a planning task is represented by an optimization model and the application of an efficient algorithm in order to aid finding one or more solutions to the problem. The basic principle underlying the approach presented herein is the understanding of design in terms of searching for solutions that fulfill specific criteria. This search is executed by the use of a constraint programming language.
keywords	Revitalization, Optimization, Constraint Programming, OPL
series	other
type	short paper
email
more	http://euklid.bauing.uni-weimar.de/ikm2006-cd/data/templates/papers/f26.pdf
last changed	2008/10/13 14:02

_id	ed47
id	ed47
authors	Pektas S T, Pultar M
year	2006
title	MODELLING DETAILED INFORMATION FLOWS IN BUILDING DESIGN WITH THE PARAMETER-BASED DESIGN STRUCTURE MATRIX
source	Design Studies, 27(1), pp. 99-122
summary	The Architecture/Engineering/Construction (AEC) industry is one of the multidisciplinary domains in which collaboration among related parties is of utmost importance. Despite the intense flow of information between design professionals, there is a lack of research to better understand and manipulate these flows. Most of the current process modelling tools in the AEC industry do not enable analyses of iterative information cycles. Moreover, these tools represent the process at high levels, thus, they are inadequate for multi-parameter problems like building design. With a view to alleviate these problems, this paper introduces the use of parameter-based design structure matrix as a process modelling and system analysis tool for building design. The method reveals insights into the process structure, optimum sequence of parameter decisions, iterative cycles and concurrency in the process. The application of the method is demonstrated through a case study on suspended ceiling design in a real-life project.
keywords	design management; design processes; modelling; planning; information processing
series	other
type	normal paper
email
last changed	2005/12/01 15:47

_id	caadria2006_541
id	caadria2006_541
authors	SHUN WATANABE
year	2006
title	TOWARD THE INTERDEPENDENTAL SPATIAL ANALYSIS AND DESIGN EDUCATION
doi	https://doi.org/10.52842/conf.caadria.2006.x.g7i
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 541-543
summary	Now, GIS stands for not only capitals of Geographical Information Systems as computer application software but also implication of Geographical Information Science. This new territory, so called GIScience, is related to physical and human geography, cartography, topography, architecture and urban planning, civil and social engineering, landscape and environmental ecology, spatial econometrics, socioeconomics, sociology, statistics, operations research, information and cognitive science, etc., and there is a real need for reinforcement of the mutual cooperation. But we still remain in a situation of highlighting the utility of GIS as tools in individual research fields, and lack comprehensive perspective of their organic linkage.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2006_e165b
id	sigradi2006_e165b
authors	Angulo, Antonieta
year	2006
title	Optimization in the Balance between the Production Effort of E-learning Tutorials and their related Learning Outcome
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 122-126
summary	This paper provides evidence on the level of media richness that may be cost effective in the development of e-learning tutorials for teaching and learning computer visualization techniques. For such a purpose the author provides an analysis of low-cost / high-impact media rich products, the effort and cost required in their development and the measurement of related learning outcomes. Circa twenty years of R&D of multimedia and hypermedia applications for instruction have demonstrated the benefits of communicating relevant information to learners using engaging media. Based on this evidence, this paper assumes that due to the cognitive style of design students, the instructional packages for learning computer techniques for design visualization that are rich in media content, tend to be more effective. Available visualization technologies make the development of e-learning tutorials feasible and apparently the logical way to implement our instructional packages. However the question in the development of e-learning tutorials becomes a more strategic one when we are called to reach a level of optimization between producing a package with a basic standard, namely; text & still-graphic based tutorials, or a state-of-the-art package that is based on video demonstrations (more than enough?) that can accommodate the students’ learning requirements and also our production costs. The costs include the human resources (instructor, producers, assistants and others) and the material resources (hardware and software, copies, and others) involved in the creation of the e-learning tutorials. The key question is: What is good enough, and what is clearly superfluous? In order to confirm our hypothesis and propose a relevant balance between media richness and learning effectiveness, this paper describes an experiment in the use of two different levels of media richness as used to deliver instructions on the production of computer animations for design visualization. The students recruited for this experiment were fairly familiarized with the use of 3D modeling concepts and software, but had no previous knowledge of the techniques included in the tutorials; in specific; camera animation procedures. The students, separated in two groups, used one of the two methods; then they proceeded to apply their newly acquired skills in the production of an animation without using the help of any external means. The assessment of results was based on the quality of the final product and the students’ performance in the recall of the production procedures. Finally an interview with the students was conducted on their perception of what was accomplished from a metacognitive point of view. The results were processed in order to establish comparisons between the different levels of achievement and the students’ metacognitive assessment of learning. These results have helped us to create a clear set of recommendations for the production of e-learning tutorials and their conditions for implementation. The most beneficial characteristics of the two tested methods in relation to type of information, choice of media, method of information delivery, flexibility of production/editorial tools,! and overall cost of production, will be transferred into the development of a more refined product to be tested at larger scale.
keywords	e-learning tutorials; media richness; learning effectiveness; cognitive style; computer visualization techniques
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2006_302
id	2006_302
authors	Dounas, Theodoros and Anastasios M. Kotsiopoulos
year	2006
title	Generation of alternative designs in architectural problems using Shape Grammars defined with animation tools - A computer implementation of shape grammars using modelling and animation software
doi	https://doi.org/10.52842/conf.ecaade.2006.302
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 302-307
summary	We present a model of generation of alternative designs to selected architectural and spatial configurations of small complexity. Specifically we present a production pipeline of architectural / spatial configurations using the context of animation and time based design tools. Our model consists of time and space design constraints of boundaries / objects affecting a given architectural design, thus producing an alternative solution for every timeframe of the animation cycle. The alternative designs vary from the original according to their temporal and/or spatial distance from the original object on the animation time-line. The constraints placed upon the objects , used as actuators of Shape Grammars, are defined informally by the user/designer while their influence can vary according to time, speed, location, configuration of the object and/or the constraint itself. However the constraints further function as formal rules for the Shape Grammar creation so that our model tries to predict ahead of time the emergence of alternate designs. The employ of animation tools [shape driven curves, speed and time-line functions,parent child relationships] in the shape generation of our model empowers the user/designer to configure whole sets of shapes and designs interactively and without the need to define every solution independently. Simultaneously, a different, time-focused view of our model describes its use on designs that develop different configurations over time. Thus a duality of our model is established: either the animated schema may be a sum or family of various designs or the animated time-line represents a single design which changes over time. Finally the possibility of an automated analysis of every design is discussed, using Space Syntax diagrams so the designer can quickly evaluate the various spatial configurations produced by a single original.
keywords	shape computation; shape grammar computer implementation; alternative designs; animation software techniques
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2006_e145a
id	sigradi2006_e145a
authors	Heiss, Leah
year	2006
title	Empathy over distance: Wearables as tools for augmenting Remote Emotional Connection
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 66-69
summary	Mainstream communication modes emphasise network speed, connection access, resolution, portability, and aesthetic design as primary to the success of their products. Within this vision a three by four centimetre screen and high resolution display are deemed adequate to emulate the intensities and complexities of face-to-face connection with loved ones. They allow us to ‘be there with you’ from wherever we might be. Yet interpersonal communication is a massively complex phenomenon. It involves a plethora of micro-activities which occur at a physical, physiological, and psychological level allowing us to recognise at a cellular scale intention, motive and emotional authenticity. Our conscious and non-conscious involvement in spatially collocated communication is substantial due to these myriad channels of real-time bi-directional information transfer. While contemporary communications technologies have the capacity to mediate our relationships, they fall short of encouraging the richness of spatially co-present interaction. The research discussed in this paper investigates the potential expansion of remote connection when electronically enhanced apparel is incorporated into the communications mix. Rather than pursuing the manifold functionalities of traditional communications media the garments discussed focus solely on the goal of enhancing empathy between physically distant individuals. This paper reports on the development and testing of a range of garments that conduct presence information between remotely located people. The garments sense, process, transmit and receive the heartbeat wavelength (ECG). They are enabled with ECG sensors, signal processing equipment, small vibration motors, and radio transceivers which allow users to ‘feel’ the heartbeat of a remote friend/lover/relative as vibration through their garment. The prototypes aim to enrich the remote communications experience through reintroducing an embodied, tactile dimension that is present in face-to-face communication. A range of user testing trials will be discussed which have been undertaken to assess the impact of the garments at a conscious and a non-conscious level. Conscious experiences were gauged through qualitative testing, by way of interviews and unsolicited written reactions, which have provided a range of engaging emotional responses. Non-conscious physiological reactions were assessed by recording ECG throughout user-testing periods. This data has been processed using HRV (heart rate variability) analysis software, running on MatLab. Preliminary results suggest that users have strong conscious and non-conscious reactions to the experience of wearing the prototype garments. The paper will describe the data processing techniques and findings of the user testing trials. The development of biosignal sensing garments has raised a range of issues including: innovative potentials for embedded peripheral awareness media; the expansion of the classical body to incorporate remotely sensed information; the issue of data semantics and the development of intensely personal non-verbal languages; and the issue of corporeal privacy when one’s biological information is exposed for potential download. They also bring into question how our bodily experiences might change when we incorporate remote sensory systems.
keywords	Enabled apparel; emotional tools; biosignals
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	2006_014
id	2006_014
authors	Iordanova, Ivanka; Lorna Heaton and Manon Guité
year	2006
title	Architectural Design Spaces and Interpersonal Communication-Changes in Design Vocabulary and Language Expression
doi	https://doi.org/10.52842/conf.ecaade.2006.014
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 14-21
summary	This paper addresses communication during the design process and the mutations it may undergo depending on the medium of design. Three experimental observations were held with students in the context of architectural digital design studios. Each of them was performed when the students were working on a design problem, in groups of two or three, with different design mediums: cardboard mock-up or modeling software with one or two mice used for interaction with the computer. The methodology used for analysing the recorded video and graphical data is based on previous research work in the domains of collaborative communication as well as in the domain of design. It combines purely qualitative interpretation with graphical linkographic analysis. A software prototype was developed in order to allow for an interactive category assignment, exploration and interaction. Gesture, verbal language and design space are studied in order to determine their dependence on the medium and the eventual impact this might have either on the design process or on the object being designed.
keywords	Design communication; education; gesture
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2006_p031d
id	sigradi2006_p031d
authors	Pontes, Mateus and Malard, Maria Lúcia
year	2006
title	Integração entre Projeto Arquitetônico e Orçamento Através de Softwares CAD [Integration between architectural design and bidding through CAD software]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 373-376
summary	Propose: Costs are a major issue in low-cost housing projects. Traditional project process uses estimated cost studies and comparative methods in initial phases, but the cost itself is elaborated only at the end phases, generating significant re-working and changes in specifications and drawings. Is desirable to use tools that possibility more integration between costs and architectural projects. Some CAD software already offers these tools, but they are not use by architects. This work intention is search in these tools the integration between costs and architectural projects. Methods: To use software Vectorworks in a low-cost housing project, Residential Serra Verde; incorporate cost aspects at initial phase by parameterization of 3D model; analysis of cost and project results. Findings: validation of cost estimative with the utilization of tested procedures. Value: developing a simple methodology of cost estimation and integration with architectural project.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	2006_798
id	2006_798
authors	Potamianos, Iakovos and Wassim Jabi
year	2006
title	Interactive Parametric Design and the Role of Light in Byzantine Churches
doi	https://doi.org/10.52842/conf.ecaade.2006.798
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 798-803
summary	Byzantine church design depended heavily on natural light which was used for evocative purposes. The orientation of the main axis of the church, the form of the apse and the location and size of its windows are affected by the need for sunlight to shine at the altar on a desired time and for a certain duration. Until now the process of accurately taking account of all the above parameters has been rather difficult and tedious. This paper illustrates the use of digital tools both for the analysis of the geometry of existing apse designs and the parametric generation of new ones. A sophisticated computer program was used to calculate sun angles during the Byzantine period incorporating calendar changes. In addition, Bentley System’s Generative Components software was used to construct a parametric model that allows the user to define the geometric conditions and parameters of the apse. The software would then iterate through multiple solutions to satisfy the desired conditions as well as allow the user to change the conditions at will. The tools were used to discover the geometry of the apse of the Byzantine church of Hagia Sophia in Constantinople and to analyze the apse of the Post-Byzantine church of the Xeropotamou monastery on Mount Athos in Greece. The paper concludes with a discussion of the role of parametric tools for architectural analysis and the generation of possible design solutions.
keywords	Parametric Design; Generative Components; Light; Byzantine Churches
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ijac20064105
id	ijac20064105
authors	Sowa, Agnieszka Katarzyna
year	2006
title	Towards architect-aided computing design
source	International Journal of Architectural Computing vol. 4 - no. 1, 69-85
summary	In the design process of some recent, specific architectural projects the part elaborated by computers and machines significantly grows. They could generate, optimize and produce the most complicated and complex solutions, taking over some tasks which before were the domain of architects. This article presents a project carried out by postgraduate students at Eidgenossische Technische Hochschule in Zurich, Switzerland, where such a digital design process was implemented, with all its advantages and disadvantages. The observations and conclusions gained during the work allow the author to formulate the concept of Architect-Aided Computing Design, to define some challenges for architects created by such a working method, and to present an analysis about the potential new software for architectural production.
keywords	Structural Optimization; Rapid Prototyping; CNC Production; CAAD Education
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00006
last changed	2007/03/04 07:08

_id	sigradi2006_c064b
id	sigradi2006_c064b
authors	Veas, Verónica; Goldsack, Luis and Muñoz, Gabriela
year	2006
title	El Factor Humano: Aprendizaje en el mundo digital [The Human Factor: Learning in the Digital World]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 224-227
summary	The experimental subject “Pathological analysis and proposals of intervention in buildings” is born as a result of understanding that the lack of connectivity between the subjects of the architecture career is due to the absence of a scene that connect them. The objective of this subject was to share a space for the construction and generation of knowledge from the personal interest and the commitment with the solution of a real necessity. The specific thematic was the “intervention in existing buildings” and it worked with a designed methodology to generate technical files that allow the intervention founded on them. Software Photomodeler was used to elaborate the photogrammetric survey and the digital platform Moodle to administer all the information. The fundamental thing of this experience is the cross-sectional characteristic (by disciplines and ages), recognizing that to incorporate the digital knowledge to the development of the subject were key to obtain the feedback of the system formed by professors, assistants, monitors and students.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	acadia06_104
id	acadia06_104
authors	Barrow, Larry R.
year	2006
title	Performance House: A CADCAM Modular House System
doi	https://doi.org/10.52842/conf.acadia.2006.104
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 104-121
summary	Millions of persons around the globe live in low quality indigenous, or Manufactured Housing (MH) systems that often result in low “performance” undesirable living environments and, at times, life threatening habitation. Our research has explored mass production principles in product design and architecture, currently at the single family housing scale, with a focus on the recent devastation along the US Gulf Coast as a result of hurricane impact, most notably hurricane Katrina.“Modern architecture” theoreticians have conceived, written, prototyped and even launched business ventures in an attempt to bring their manufactured housing “ideas” to fruition. However, architects have generally had little “long-term” impact in the area of manufactured housing strategies and the current manufactured housing industry remains archaic and problematic. This paper includes our research of other architects attempts to leverage technology in the manufactured housing industry; additionally, we analyzed current problems in the US mass housing industry. We then derived a set of “design criterion” as a means of anchoring our design inquiry for a proposed factory-built modular house system.Our research encompasses both process and product innovation; this paper reflects on our use of technology to leverage an Industrial Design (ID) process that is inclusive of many “design” partners and team members. We are using both virtual and physical output representation and physical prototyping for a factory-built house system; our Research and Development (R&D) is on-going with our collaborating design-manufacture engineering partners from the automotive, furniture and aerospace research labs here at Mississippi State University. Our goal is to use “industrial design” principles to produce mass housing components that provide durable-sustainable housing.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	caadria2006_111
id	caadria2006_111
authors	DAVID HARRISON, MICHAEL DONN
year	2006
title	USING WEB 2.0 TECHNOLOGIES TO PRESERVE DESIGN HISTORY AND IMPROVE COLLABORATION
doi	https://doi.org/10.52842/conf.caadria.2006.x.a7m
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 111-117
summary	This paper describes ongoing research into how emerging Internet concepts used in conjunction with existing Information Technologies (IT) can improve inter-project communication and understanding. The emphasis of the research is to use technology as an enabler to share personal thoughts and enhance the conversation that takes place within a development team. It stems from the observation that the emphasis of many new Architecture, Engineering and Construction (AEC) technologies is to minimise and diffuse project conversation with highly complex, machine interpretable building information models.Project teams are usually brought together for a relatively short but intense period of time. Following project completion these unique teams are dissolved just as quickly and often are never formed again. As a consequence it is difficult to justify the investment in time and resources required to implement complex IT-based collaboration solutions. A further barrier to adoption is the differential application of IT skills across the AEC industry. Therefore in order for a new technology to gain broad acceptance and be most beneficial it must be applicable to the broadest audience with the minimum investment required from all parties. The primary objective of this research is to preserve the rich design history of a project from conception to completion. Submitted information can be intelligently searched using the meta-data sourced from syndicated data feeds about team members, project timelines, work diaries and email communication. Once indexed users can tag documents and messages in order to provide a further, far richer layer of meta-data to assist in searching, identification of issues and semantic clarification. This strategy of defining AEC semantics through social interaction differs greatly from that of more complex, computer interpretable solutions such as Industry Foundation Classes. Rather than abstracting information to suit a generic yet highly intelligent building model, the emphasis is on preserving the participant’s own thoughts and conversation about decisions and issues in order to create a forum for intelligent conversation as the design evolves.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	c870
id	c870
authors	Derix, Christian
year	2006
title	Approximating Phenomenological Space
source	EGICE - Intelligent Computing in Engineering and Architecture
summary	Architectural design requires a variety of representations to describe the many expressions a building can be observed through. Commonly, the form and space of a building are represented through the visual abstraction of projective geometry. The medium of geometric representation has become synonymous with architectural space. The introduction of computational design in architecture has not changed our understanding or representation of architectural space, only of its geometric description and production processes. The addition of the computer as a medium should allow us to open new ‘ways of seeing’ since the medium allows for novel descriptions and expressions via data processing hitherto impossible. This paper would like to propose some computational methods that could potentially describe and generate non-geometric but rather phenomenal expressions of architectural space.
keywords	neural networks, architectural space, cognition, phenomena
series	book
type	normal paper
email
more	http://www.springerlink.com/content/1j54337p42051p84/?MUD=MP
last changed	2012/09/17 21:02

_id	2006_506
id	2006_506
authors	Fioravanti, Antonio and Rinaldo Rustico
year	2006
title	x-House game - A Space for simulating a Collaborative Working Environment in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2006.506
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 506-511
summary	The research consists of the set up of a game simulating a e Collaborative Working Environment – CWE – in Architectural Design. The use of a game is particularly useful as it makes it possible to simplify the complex terms of the problem and, through the game itself, makes it easier to study knowledge engineering tools, communication protocols and the areas of an ICT implementation of a general model of collaborative design. In the following several characteristics of the game are given (also with reference to other games) such as; participating actors (Wix 1997), the “pieces” (construction components) used, the modular space employed, the PDWs/SDW dialectics, the screenshot of the interface prototype, the score.
keywords	Architectural Design; CWE; Game; Representation Model; KBs
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss2006-hb-203
id	DDSS2006-HB-203
authors	Gerhard Zimmermann
year	2006
title	Multi-Agent Model to Multi-Process Transformation - A housing market case study
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 203-219
summary	Simulation is a means to help urban planners and investors to optimize inhabitant satisfaction and return on investment. An example is the optimal match between household preferences and property profiles. The problem is that not enough knowledge exists yet about dynamic user activity models to build reliable and realistic simulators. Therefore, we propose a modeling and software technique that produces simulator prototypes very efficiently for the development, test, and evaluation of many different user activity models, using executable models, code generation, and a domain specific software process. As a specific feature, the model is based on many agents acting independently from each other and that are mapped in several refinement steps into the same number of concurrent processes. The housing example is used as a case study to explain the process and show performance results.
keywords	Agent technology, User activity modeling, User activity simulation, Software engineering, Code generation, Software process
series	DDSS
last changed	2006/08/29 12:55

_id	f42b
id	f42b
authors	Hofmeyer, Herm
year	1994
title	KONSTRUKTIEF ONTWERPEN MET BEHULP VAN COMPUTERPROGRAMMATUUR (1) VERSLAG AFSTUDEERPROJECT (2) BIJLAGE GEBRUIKSAANWIJZING, CODE EN TOELICHTING BIJ PROGRAMMA
source	Technische Universiteit Eindhoven, Department of Architecture, Building and Planning, Structural Design Group
summary	This thesis presents the first basics of an expertsystem to transform a spatial into a structural design. The system thus relates space-allocation techniques and structural design software for stress-engineering. For the implementation Prolog-2 was used. Although in Dutch, the thesis provided background information for more recently written papers for eCAADe (2005) and CAADRIA (2006). The thesis was published as a paper in Design Studies (2006).
keywords	space-allocation; structural design; expert system
series	thesis:MSc
type	normal paper
email
last changed	2006/04/21 07:58

For more results click below: