Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	acadia06_251
id	acadia06_251
authors	d’Estrée Sterk, Tristan
year	2006
title	Shape Change in Responsive Architectural Structures: Current Reasons & Challenge
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 251-260
doi	https://doi.org/10.52842/conf.acadia.2006.251
summary	Shape control within architectural structures is a natural extension to the practice of engineering and architectural design. The knowledge needed for it’s development builds upon two well understood foundations: 1) the long existing knowledge that building performance and function are intimately connected to the shape of built spaces; and 2) the relatively new idea that embedded computational systems may be employed to control devices in useful and beautiful ways. When combined, each type of knowledge can be used to further architecture and engineering at both theoretical and methodological levels. Structural shape control is of major interest within architecture because it is the primary ingredient needed to produce building envelopes that change shape. Structural shape control also currently represents a major technological and methodological stumbling block for architects, posing many challenges that have theoretical and practical origins. Theoretically, responsive architectural structures demand a re-evaluation of existing notions of space making. Practically, these systems demand a re-evaluation of construction and design methodologies across both engineering and architectural practice.
series	ACADIA
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

_id	caadria2006_047
id	caadria2006_047
authors	SHAI YESHAYAHU, A.; B. MARIA VERA
year	2006
title	CUT, COPY, PASTE SOCIETY
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 47-52
doi	https://doi.org/10.52842/conf.caadria.2006.x.g1r
summary	You and I were not born in the 1990’s thus our experience about the true modalities of circulation and communication that have substantially transformed the methods that form and inform us today, are not really “pure”. Why? Because we know how slow time was before the communication boom of this last decade and because some of us still believe that we must read to be inform and thus, visit a bookstore, library or friends house and get peeks inside a subject of matter. So experiencing life as we bypass the book _ that’s a story of a brand new era! Taking note of the enormous changes this era brings, is fundamental to our current pedagogic undertakings. We seek data about the differences that lie in the way individuals, which never knew a world before or between analogue and digital zones, process information. It signals a dramatic shift in cognitive realms that is deeply imbedded in our emerging socio-economic spheres. So, you say “hypothesizing that economic, technologic, and cultural fluxes fabricate new means to learn and think, is not a fresh idea”_ True. But, it led us to ask one fundamental question _What are the upcoming learning habits employed by the “post digital” society? We noted that the post digital generation is an avid cut, copy, paste society that is able to extract information from infinite resources and mix, remix in diversified modes, through time and in real-time. We think these abilities are strengths, which will permit students to multitask yet they strongly differ from the academic agendas that are concerned with meditative processes and qualitative interdisciplinary task. As aspiring academics interested in the reconfiguration of current pedagogic formats we seek a creative intervention for future design generations, one that can benefit both the upheavals of the cultural world and the integrity of the academic setting where a pedagogy that links extended fields of knowledge with shifting cognitive habits can emerge. In this arena where cognition plays an important role, our goals are challenging and difficult, especially in the beginning years when the foundations set forward leaves lasting impressions. Thus, letting go of familiar grounds and tuning to continual alterations of the immediate surroundings enables us to seek means that facilitate important readings for our current learning/teaching processes. Demystifying changes and embracing differences as design potentials for new interventions are basic programmatic elements that permit us to incorporate a rigorous research agenda in the design exercises. Our presentation will project the current state of our teaching modality and provide examples of current studio work. It will demonstrate how everyday rituals, journeys and research observations, are documented by a society that heralds a new academic setting.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia06_302
id	acadia06_302
authors	Clarke, Cory
year	2006
title	Synthetic Dissemination
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 302-303
doi	https://doi.org/10.52842/conf.acadia.2006.302
summary	Synthetic Dissemination, within the context of architecture and information culture, offers seemingly contradictory possibilities. The ends of dissemination and synthesis are at odds. The purpose of the former being diffusion and distribution, and the byproduct of the latter being quite the opposite - namely the combination and association of information into a coherent whole. The conjoining of dissemination and synthesis implies these two contradictory operations can operate in a symbiotic or complementary manner.Relative to architecture and design the combination of dissemination and synthesis is potentially profound. The marriage of synthesis and dissemination presents a possibility that the method of distributing information could be, or have embedded within it, a synthetic process. In the simplest sense synthetic dissemination implies that the tools for design and synthesis could be the same as tools for documentation and dissemination; or more specifically that the fluidity and creativity of design software could be coupled with the practicality and meticulousness of building information modelers (BIM). More abstractly synthetic dissemination implies that the means of encoding and distributing information could propagate design. Architects have readily adopted digital tools for encoding and presenting their ideas, but have not fully recognized how the informational structures of these applications promote or hinder design. Developments in the information architecture of D software, such as the shift from geometrically based data structures to procedurally based directed action graphs (DAG) as seen in Maya and DMax, have opened up innovative methods of architectural design. Each new change in the information architecture of design software ushers in new approaches to design, raising the question - how does the production and storage of information affect design? More broadly, how can the tools of dissemination facilitate synthesis?
series	ACADIA
email
last changed	2022/06/07 07:56

_id	2006_234
id	2006_234
authors	Donath, Dirk and Christian Tonn
year	2006
title	Complex design strategies using building information models - Evaluation and interpretation of boundary conditions, supported by computer software
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 234-243
doi	https://doi.org/10.52842/conf.ecaade.2006.234
summary	The choice of a chord and its execution should be regarded as a must and not left to arbitrary wish or superficial speculation. (Johannes Itten, 1961) The paper describes a modular concept for the IT-support of planning practice using BIM (Building Information Modelling) and a parameterized building model. The platform used is the modularized software concept for architectural planning in existing built contexts (prototype software FREAK). The current progress in the development of a reasoned support of planning tasks is described in this paper in more detail. The system consists of a series of software prototypes which are linked to the BIM, utilize the specific data within and demonstrate the value of a consistent and extendable CAD-model. The “Colored Architecture” software prototype is one such design-support module of the software platform and enables the designer to experiment with the parameters colour, light and materials in architectural space. This module supports experimentation, assessment and realization of colours and materials in the architectural design process on a new quality. For instance, the integration of “live radiosity” light simulation allows a qualified and interactive assessment and evaluation of colours and materials in near-real lighting conditions. The paper also details further software prototypes, modules and concepts including building surveying and the design of self-supporting domed structures.
keywords	Design; Parameterized Building Information Modelling; Plausibility; Planning Support; Colour, Material and Light Design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia06_392
id	acadia06_392
authors	Dorta, T., Perez, E.
year	2006
title	Hybrid modeling revaluing manual action for 3D modeling
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 392-402
doi	https://doi.org/10.52842/conf.acadia.2006.392
summary	3D modeling software uses conventional interface devices like mouse, keyboard and display allowing the designer to model 3D shapes. Due to the complexity of 3D shape data structures, these programs work through a geometrical system and a graphical user interface to input and output data. However, these elements interfere with the conceptual stage of the design process because the software is always asking to be fed with accurate geometries—something hard to do at the beginning of the process. Furthermore, the interface does not recognize all the advantages and skills of the designer’s bare hands as a powerful modeling tool.This paper presents the evaluation of a hybrid modeling technique for conceptual design. The hybrid modeling approach proposes to use both computer and manual tools for 3D modeling at the beginning of the design process. Using 3D scanning and rapid prototyping techniques, the designer is able to go back and forth between digital and manual mode, thus taking advantage of each one. Starting from physical models, the design is then digitalized in order to be treated with special modeling software. Then, the rapid prototyping physical model becomes a matrix or physical 3D template used to explore design intentions with the hands, allowing the proposal of complex shapes, which is difficult to achieve by 3D modeling software alone.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2006_e090b
id	sigradi2006_e090b
authors	Hanna, Sean and Turner, Alasdair
year	2006
title	Teaching parametric design in code and construction
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 158-161
summary	Automated manufacturing processes with the ability to translate digital models into physical form promise both an increase in the complexity of what can be built, and through rapid prototyping, a possibility to experiment easily with tangible examples of the evolving design. The increasing literacy of designers in computer languages, on the other hand, offers a new range of techniques through which the models themselves might be generated. This paper reviews the results of an integrated parametric modelling and digital manufacturing workshop combining participants with a background in computer programming with those with a background in fabrication. Its aim was both to encourage collaboration in a domain that overlaps both backgrounds, as well as to explore the ways in which the two working methods naturally extend the boundaries of traditional parametric design. The types of projects chosen by the students, the working methods adopted and progress made will be discussed in light of future educational possibilities, and of the future direction of parametric tools themselves. Where standard CAD constructs isolated geometric primitives, parametric models allow the user to set up a hierarchy of relationships, deferring such details as specific dimension and sometimes quantity to a later point. Usually these are captured by a geometric schema. Many such relationships in real design however, can not be defined in terms of geometry alone. Logical operations, environmental effects such as lighting and air flow, the behaviour of people and the dynamic behaviour of materials are all essential design parameters that require other methods of definition, including the algorithm. It has been our position that the skills of the programmer are necessary in the future of design. Bentley’s Generative Components software was used as the primary vehicle for the workshop design projects. Built within the familiar Microstation framework, it enables the construction of a parametric model at a range of different interfaces, from purely graphic through to entirely code based, thus allowing the manipulation of such non-geometric, algorithmic relationships as described above. Two-dimensional laser cutting was the primary fabrication method, allowing for rapid manufacturing, and in some cases iterative physical testing. The two technologies have led in the workshop to working methods that extend the geometric schema: the first, by forcing an explicit understanding of design as procedural, and the second by encouraging physical experimentation and optimisation. The resulting projects have tended to focus on responsiveness to conditions either coded or incorporated into experimental loop. Examples will be discussed. While programming languages and geometry are universal in intent, their constraints on the design process were still notable. The default data structures of computer languages (in particular the rectangular array) replace one schema limitation with another. The indexing of data in this way is conceptually hard-wired into much of our thinking both in CAD and in code. Thankfully this can be overcome with a bit of programming, but the number of projects which have required this suggests that more intuitive, or spatial methods of data access might be developed in the future.
keywords	generative design; parametric model; teaching
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	acadia06_461
id	acadia06_461
authors	Martens, Bob
year	2006
title	Exploring the Design and Fabrication of Inflatables: “The Taming of the Shrew”
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 461-470
doi	https://doi.org/10.52842/conf.acadia.2006.461
summary	The building materials that help designers or architects achieve their goal of defining and enclosing space are usually concrete, steel, glass or wood. For these materials designers have both empirical data gained from experience and at times complex calculation methods enabling them to use them in their designs in a tangible, reckonable and, consequently, almost risk-free manner. It seems obvious that creating a design with well-known building materials will lead to more or less predictable outcomes. This is a good reason for investigating a design process dealing with air-filled building-elements. Architectural structures look completely different when one employs a “building material” which has not been subjected to either detailed investigations or sophisticated calculations. The “Smart_Air” Design Studio was devised to take a closer look at the unusual building material “air,” which we have only just begun to explore, and to make it the centre of a focused design exercise. The objective was to use “air” or, rather, pneumatic technologies, to arrive at structurally sound solutions for enclosing space, which could be considered a “roof” in the widest sense of the term.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	8d88
id	8d88
authors	Verdy Kwee, Antony Radford, Dean Bruton, Ian Roberts
year	2006
title	Architecture \| Media \| Representations : Survey Data 2006
summary	In the architecture education field, the modes of lecturers‚ deliveries are constantly assessed and rightly so, for their performance and effectiveness in disseminating information or imparting knowledge. This is normally done through institution-wide survey of student satisfaction. But are lectures the only source of knowledge in the process of understanding a particular architecture, for example? As we understand, this is not the case. Interestingly enough, as the attached survey shows, they are not even the preferred ones by most. It could easily be established that architectural information has undergone various manners of representations in publications; most, if not all of which are author-driven in contents and structures. To whatever extent that these publications may have been relied upon as other sources of information and knowledge, it is unusual that there appears to be an absence of assessment of the effectiveness they assume to deliver. It is often found that in such publications, readers are met with irrational expectations of prior understanding of the subject matters that the publications themselves often become beacons which spotlight the positions or commands of knowledge of the authors rather than ones that genuinely guide readers to achieve maximum possible comprehension. Could the reclusive nature of the activity, brought upon by these publications unlike that of the lecture settings, allow them to be easily unquestion-ed/able? Or have they become so effective that their positions are beyond reproach? In the age where a shadow of change is being brought upon by the presence of a more interactive electronic delivery, it is an interesting period to retreat and reassess the position of the current available media in relation to message recipients. Have the available sources of information really been effective? Will/Should Technology see mere replicas of traditional mode of delivery in digital forms? Could we see possible shifts of delivery methods? What should we be prepared for? These questions were springboards that launched the need for the survey. However, the collected data may be used in a few other various manners than to locate the present scenario or serve as basis to drive the future direction/s in architectural information representations.
keywords	survey, media, representations, architectural information
series	other
type	normal paper
email
last changed	2006/07/05 05:36

_id	ascaad2007_012
id	ascaad2007_012
authors	Zeile, P.; F. Farnoudi and B. Streich
year	2007
title	Fascination google earth – use in urban and landscape design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 141-148
summary	Virtual 3D-City-and Architecture models, Virtual Globe systems like NASA World Wind and Google Earth as well as new attempts of immersive technologies become more important, not only among experts in spatial planning, but also many private users are interested in these new tools. These developments cause powerful impacts in the general social, cultural and everyday life. Given the dynamic development of Google Earth, the discussion about the representation and the use of geodata for a wide user group - beyond the planning disciplines - reaches new heights. According to expert's opinion, Google Earth with its computer language KML (Keyhole Markup Language) becomes a 3D-GIS-Standard [Rush in 2006]. By the easy and quick representation of three-dimensional (city) structures and single buildings, Google Earth will significantly influence all groups of society. User groups which have not been acquainted with geodata or highly specified and complex GIS-Systems [Dworschak in 2006], discover that working with this data by using Google Earth is great fun. They recognize, that with the help of generally understandable and easily recognizable visualisation of these data, mediation of knowledge becomes very easy. In addition, it is acknowledged that geodata has great potential to add value, in disciplines such as the academics, the financial sector or personal use.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	2006_890
id	2006_890
authors	Calabrese, Antonio; Carlo Coppola; Luca Licenziato; Francesco Mele; Antonio Sorgente and Oliviero Talamo
year	2006
title	Creation and editing of artifacts’ models by Generative Projects
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 890-896
doi	https://doi.org/10.52842/conf.ecaade.2006.890
summary	In this paper we propose an aiding system for the creation of models of artifacts which is based on a methodology that has its foundations in a concept that we call generative projects. This methodology has been defined separating the design paradigm of the designer from the computational model, defined in order to implement the system that support the designer in the design process, and from the graphical engine of the specific rendering system, chosen for the visualization of the generated artifact. In this work we defined an user interface that assists the designer during the design process, translates the result of the design into the underlying computational model and carries out the access to the rendering system in a transparent way. The experimentation of the system was conducted on various artifacts domains, as jewels, glasses, lamps, cutlery, wireless headphones, aerosols, pots and plans.
keywords	formal ontology; generative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia06_411
id	acadia06_411
authors	Campbell, Cameron
year	2006
title	Digital Design Pedagogy Setting the Foundation for Digital Design in the Architecture Curriculum
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 411-417
doi	https://doi.org/10.52842/conf.acadia.2006.411
summary	In this paper I will present the work of developing a digital media foundation course that addresses this need to give design students a digital design foundation that crosses over many design disciplines and navigates the inter-relationships of various software packages. These considerations do not preclude students from engaging in the analog-digital debate. Instead, the students become informed participants in understanding the differences, benefits, and liabilities of the mediums. Furthermore, by addressing digital technology at an early stage, the digital divide in architectural education is reduced, and more students have the opportunity to fold digital technology into their foundations of methodologies.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2006_e171c
id	sigradi2006_e171c
authors	González Böhme, Luis Felipe and Vargas Cárdenas, Bernardo
year	2006
title	Foundations for a Constraint-Based Floor Plan Layout Support in Participatory Planning of Low-Income Housing
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 283-287
summary	We introduce the foundations of a novel approach that deals with constraint-based design methods to supporting participatory planning processes of low-income dwellings. We examine the space allocation problem inside the architectural domain on the basis of graph theory and combinatorics, providing a concise mathematical background for an implementation strategy called FLS (Floor plan Layout Support), which is analyzed here for the first time regarding this particular context of application. The philosophy underlying a design method that is mainly driven by the formulation of distinct constraints suggests to avoid the traditional procedure of first to create a yet not necessarily valid instance of the eventual design solution by directly choosing specific parameter values of its shape, and later on to evaluate its validity by confronting the designed model to a set of applicable constraints. Instead, constraint-based design poses a search procedure that operates in a space of planning-relevant constraint sets. The FLS methodology integrates some few principles of constraint-based automated reasoning with high user interactivity, into a design environment where as much dwellers as planners can collaboratively work in solving spatial organization problems of housing projects. The FLS model of application makes use of a combination of dweller-specified constraints, planning and zoning regulations, and a small library of modular space units. Constraint-based design ! methods are particularly capable of supplying efficient support for the collaborative involvement of dwellers into the architectural programming process of her/his own home. Mainly, because dwellers themselves tend to describe their space need and design intentions as a set of constraints on room quantity, space utilization, circulation system, allocation of available furniture, available budget, construction time, and so forth. The goal is to achieve an integrated tool for finding and modelling topologically valid solutions for floor plan layout alternatives, by combining user-driven interactive procedures with automatic search and generative processes. Thus, several design alternatives can be explored in less time and with less effort than using mainstream procedures of architectural practice. A FLS implementation will constitute one system module of a larger integrated system model called Esther. A FLS tool shall interact with other functional modules, like e.g. the BDS (Building Bulk Design Support), which also uses constraint-based design methods. A preliminary procedural model for the FLS was tested on Chile’s official social housing standards (Chilean Building Code – OGUC. Art. 6.4.1) which are very similar to most Latin American housing programs currently in operation.
keywords	constraint-based design; floor plan layout; participatory planning; low-income housing; design theory; design proces
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddss2006-pb-313
id	DDSS2006-PB-313
authors	Jakob Beetz, Jos van Leeuwen, and Bauke de Vries
year	2006
title	Distributed Collaboration in the Context of the Semantic Web
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 313-323
summary	In this paper we are proposing a Multi Agent System (MAS) framework for the facilitation of distributed collaboration in the AEC/FM domain. We are showing how the stack of technologies developed in the Semantic Web community can be put to use for the specific requirements of the building industry. Based on our earlier findings and developments in the area of logic based knowledge representations for the Design and Construction industry, we are outlining how these can form the semantic foundations of internal agent representations and their interconnection using speech acts.
keywords	Collaborative design, Multi-agent systems, Semantic Web
series	DDSS
last changed	2006/08/29 12:55

_id	sigradi2006_c176b
id	sigradi2006_c176b
authors	Rossado Espinoza, Veronica Paola
year	2006
title	Entre la Grafica Digital y Analoga: Metodologia Empleada en la Formacion de Arquitectos [Between digital and analogue graphic: Methodology in architects development]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 195-199
summary	From the beginning of the new millennium, the Faculty of Architecture and Urbanism of the Ricardo Palma University, it's convinced that it requires to adapt itself to the constant technological changes, it has seen necessary the updating of its Curricular Plan, the same one that from year 2000 has suffered modifications to fulfill the demands that the society demands. This research attempt to establish the new profile of the architect, as well as a new curricular structure and the academic principles and foundations that the Faculty for the development of architects. The objectives of each academic area are emphasized, in special of the Area of workshops, teaching methodology that identifies the formation of Architects in the Ricardo Palma University.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	sigradi2009_1158
id	sigradi2009_1158
authors	Tiani, André
year	2009
title	O Uso do Computador no Ensino de Projeto de Arquitetura: Análise Crítica da Produção dos Seminários SIGraDi e Projetar [The Use of Computer in Teaching Design Architecture: critical analysis of the production of Seminars SIGraDI and PROJETAR ]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This work, tied with the research line Education of Architecture, has as objective to reflect on the use of the computer in the education of architecture design in Brazil from the literature review of articles related to the subject published by Brazilian authors in the annals of the seminars SIGraDI and PROJETAR, in the period from 2000 to 2006. The analysis focuses on two issues: (a) the theoretical foundations and practices related to the processes and ways of rapprochement between the computer and the teaching of design, (b) the use of terminology and concepts related to the theme,
keywords	Ensino-aprendizagem; Projeto de Arquitetura; Projeto Auxiliado por Computador; SIGraDI; PROJETAR
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	2006_758
id	2006_758
authors	Ucelli, Giuliana; Giuseppe Conti; Stefano Piffer; Gabrio Girardi and Raffaele De Amicis
year	2006
title	Virtual Walk in a Lost Built Environment using Immersive Virtual Reality
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 758-762
doi	https://doi.org/10.52842/conf.ecaade.2006.758
summary	This paper illustrates the methodology, technological solutions and interaction metaphors chosen for the development of a 3D immersive Virtual exhibition that aims at enriching the visit of an important part of the historical cultural heritage of the city of Trento, in Italy. The goal of this work, supported by the local authority for Cultural Heritage, was to implement a user friendly virtual environment, which could show to the visitors the significance of the archeological findings of the ancient Roman town of Tridentum, despite the peculiarity of the site’s premises, located below a square among a theatre foundations. Outcomes of the research work are a high-quality and scientifically correct reconstruction of the Roman town in various historical eras, thanks to fruitful interaction with archeologists, and the development of an ad-hoc user-friendly immersive virtual environment implementing a customized interaction metaphor for the fruition of the virtual reconstruction. The developed interface allows users speaking different languages to share simultaneously the experience of virtual tours across time using a joystick. The whole environment has been developed to become a permanent virtual exhibition in the premises of the archeological site.
keywords	Virtual Reality; Cultural Heritage; User Interfaces
series	eCAADe
email
last changed	2022/06/07 07:57

_id	eaea2005_133
id	eaea2005_133
authors	Weber, Ralf
year	2006
title	Urban space and architectural scale - Two examples of empirical research in architectural aesthetics
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 133-149
summary	As one of the oldest schools of architecture in Germany, Dresden has a long and continuous tradition in the field of architectural aesthetics and building composition. Architects such as Fritz Schumacher initiated research and teaching in the field in the 1920s, and this was revitalised during the 1950s by Otto Schubert who laid the foundations for a scientific description of the correlation between optics and architectural design, and also worked towards a comprehensive theory of architectural composition. As a result of the architectural ideology of the East German regime, such studies were consigned to near oblivion and the main concern became interior decoration. With the appointment of Professor Ralf Weber, the institute was reestablished in 1994 under its original name, the Institute of Spatial Design (Raumgestaltung). Its new research agenda originated from Weber’s book “On the Aesthetics of Architectural Form - A Psychological Approach to the Structure and the Order of Perceived Architectural Space” (Ashgate 1994). In order to verify some of the hypotheses advanced in the book empirically, members of the institute have been carrying out a number of studies in the areas of oculomotor research and the perceptual foundations of design, and have been addressing issues that would help formulate principles of good architectural form and space applicable to the everyday practice of architectural design. Currently, the Institute of Spatial Design focuses on the further development of the psychological bases of experiencing architecture, as well as on theories of aesthetics and their application in practice. Specifically, attention is paid, on the one hand, to the perception and experience of architecture, i.e. aesthetics, and on the other, to the assemblage of various parts into an overall whole in a building, city or landscape – in other words, architectural composition. These two aspects are naturally inextricably intertwined: the one concerns the reception of architecture, the other, its production. Under these headings, various other areas of interest, such as architectural tectonics, systems of order and proportions, or the issue of scale in architecture, are tackled through dissertations, research projects and seminars. The institute has been cooperating on several studies with the Cognitive & Biological Psychology Unit at the University of Leipzig and the intention is eventually to establish an interdisciplinary research unit for architectural aesthetics.
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	ascaad2006_paper15
id	ascaad2006_paper15
authors	Anz, Craig and Akel Ismail Kahera
year	2006
title	Critical Environmentalism and the Practice of Re-Construction
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This research focuses on the implications and applications of “critical environmentalism” as a quintessential epistemological framework for urban interventions while implementing digital applications that foster collective, round-table approaches to design. Essentially centering the environment (Umwelt) as an encompassing and interconnecting catalyst between multiple disciplines, philosophies, and modes of inquiry and technologies, the framework reciprocally fosters individual and critical identities associated with particular places, belief systems, and their participants as a primary concern. Critical environmentalism promotes a comprehensive, reciprocally unifying epistemological framework that can significantly inform architectural interventions and the tethered use of its technologies in order to foster increased vitality and a certain coinvested attention to the complexities of the greater domain. Grounding the theory in pedagogical practice, this paper documents an approach to urban design and architectural education, implemented as a case-study and design scenario, where divergent perspectives amalgamate into emergent urban configurations, critically rooted in the conditional partialities of place. Digital technologies are incorporated along with analogical methods as tools to integrate multiple perspectives into a single, working plane. Engaging the above framework, the approach fosters a critical (re)construction and on-going, co-vested regeneration of community and the context of place while attempting to dialogically converge multiple urban conditions and modes-of-thought through the co-application of various digital technologies. Critically understanding complex urban situations involves dialogically analyzing, mapping, and modeling a discursive, categorical structure through a common goal and rationale that seeks dialectic synthesis between divergent constructions while forming mutual, catalyzing impetuses between varying facets. In essence, the integration of varying technologies in conjunction, connected to real world scenarios and a guiding epistemic framework cultivates effective cross-pollination of ideas and modes through communicative and participatory interaction. As such it also provides greater ease in crosschecking between a multitude of divergent modes playing upon urban design and community development. Since current digital technologies aid in data collection and the synthesis of information, varying factors can be more easily and collectively identified, analyzed, and then simultaneously used in subsequent design configurations. It inherently fosters the not fully realized potential to collectively overlay or montage complex patterns and thoughts seamlessly and to thus subsequently merge a multitude of corresponding design configurations simultaneously within an ongoing, usable database. As a result, the pedagogical process reveals richly textured sociocultural fabrics and thus produces distinct amplifications in complexity and attentive management of diverse issues, while also generating significant narratives and themes for fostering creative and integrative solutions. As a model for urban community and social development, critical environmentalism is further supported the integrative use of digital technologies as an effective means and management for essential, communicative interchange of knowledge and thus rapprochement between divergent modes-of-thought, promoting critical, productive interaction with others in the (co)constructive processes of our life-space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2006_paper10
id	ascaad2006_paper10
authors	Babsail, Mohammad and Andy Dong
year	2006
title	Sensor-based Aware Environment
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This paper provides an overview of the requirements for a computational model of a Sensor-Based Aware Environment (SBAE) that integrates sensor technologies with the Building Information Modelling (BIM) in order to sense ambient and physical aspects of the built environment. Wireless sensors sense ambient data of a built environment, process, and communicate these data through an ad-hoc wireless network. The BIM, on the other hand, is based on International Foundation Classes (IFCs) and contains data about the physical infrastructure (i.e. Walls, Windows, doors) and abstract entities (i.e. Spaces, Relationships) and relationships between those entities. Therefore, the proposed computational model could sense real time data that are related to the as-built information model allowing for holistic building state information.
series	ASCAAD
last changed	2007/04/08 19:47

For more results click below: