Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 320

Reformat results as: short short into frame detailed detailed into frame

_id	ijac20064106
id	ijac20064106
authors	Kilian, Axel
year	2006
title	Design innovation through constraint modeling
source	International Journal of Architectural Computing vol. 4 - no. 1, 87-105
summary	In this paper we describe how constraint modeling can support design innovation. Furthermore, we lay out how constraints are employed in the construction and exploration of a model's design space. We place the approach within the context of design exploration using computational and conceptual representations of design. A review of the literature reveals that geometric, topologic, functional, and quantitative constraints are those most commonly used. For each constraint type, an example is presented drawing from several workshops and research conducted by the author. The examples range from product design, to structural design, to fabrication issues in freeform geometry. Based on the case studies, we describe how the different types of constraints can be used as design drivers and help in the exploration of solution spaces. In conclusion, we identify the need for bidirectional exercising of constraints as the next challenge in design exploration and discuss how it is relevant in particular for cross domain design.
keywords	Design Exploration; Constraint Modeling; Parametric Modeling
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00007
last changed	2007/03/04 07:08

_id	ascaad2006_paper15
id	ascaad2006_paper15
authors	Anz, Craig and Akel Ismail Kahera
year	2006
title	Critical Environmentalism and the Practice of Re-Construction
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This research focuses on the implications and applications of “critical environmentalism” as a quintessential epistemological framework for urban interventions while implementing digital applications that foster collective, round-table approaches to design. Essentially centering the environment (Umwelt) as an encompassing and interconnecting catalyst between multiple disciplines, philosophies, and modes of inquiry and technologies, the framework reciprocally fosters individual and critical identities associated with particular places, belief systems, and their participants as a primary concern. Critical environmentalism promotes a comprehensive, reciprocally unifying epistemological framework that can significantly inform architectural interventions and the tethered use of its technologies in order to foster increased vitality and a certain coinvested attention to the complexities of the greater domain. Grounding the theory in pedagogical practice, this paper documents an approach to urban design and architectural education, implemented as a case-study and design scenario, where divergent perspectives amalgamate into emergent urban configurations, critically rooted in the conditional partialities of place. Digital technologies are incorporated along with analogical methods as tools to integrate multiple perspectives into a single, working plane. Engaging the above framework, the approach fosters a critical (re)construction and on-going, co-vested regeneration of community and the context of place while attempting to dialogically converge multiple urban conditions and modes-of-thought through the co-application of various digital technologies. Critically understanding complex urban situations involves dialogically analyzing, mapping, and modeling a discursive, categorical structure through a common goal and rationale that seeks dialectic synthesis between divergent constructions while forming mutual, catalyzing impetuses between varying facets. In essence, the integration of varying technologies in conjunction, connected to real world scenarios and a guiding epistemic framework cultivates effective cross-pollination of ideas and modes through communicative and participatory interaction. As such it also provides greater ease in crosschecking between a multitude of divergent modes playing upon urban design and community development. Since current digital technologies aid in data collection and the synthesis of information, varying factors can be more easily and collectively identified, analyzed, and then simultaneously used in subsequent design configurations. It inherently fosters the not fully realized potential to collectively overlay or montage complex patterns and thoughts seamlessly and to thus subsequently merge a multitude of corresponding design configurations simultaneously within an ongoing, usable database. As a result, the pedagogical process reveals richly textured sociocultural fabrics and thus produces distinct amplifications in complexity and attentive management of diverse issues, while also generating significant narratives and themes for fostering creative and integrative solutions. As a model for urban community and social development, critical environmentalism is further supported the integrative use of digital technologies as an effective means and management for essential, communicative interchange of knowledge and thus rapprochement between divergent modes-of-thought, promoting critical, productive interaction with others in the (co)constructive processes of our life-space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	caadria2006_111
id	caadria2006_111
authors	DAVID HARRISON, MICHAEL DONN
year	2006
title	USING WEB 2.0 TECHNOLOGIES TO PRESERVE DESIGN HISTORY AND IMPROVE COLLABORATION
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 111-117
doi	https://doi.org/10.52842/conf.caadria.2006.x.a7m
summary	This paper describes ongoing research into how emerging Internet concepts used in conjunction with existing Information Technologies (IT) can improve inter-project communication and understanding. The emphasis of the research is to use technology as an enabler to share personal thoughts and enhance the conversation that takes place within a development team. It stems from the observation that the emphasis of many new Architecture, Engineering and Construction (AEC) technologies is to minimise and diffuse project conversation with highly complex, machine interpretable building information models.Project teams are usually brought together for a relatively short but intense period of time. Following project completion these unique teams are dissolved just as quickly and often are never formed again. As a consequence it is difficult to justify the investment in time and resources required to implement complex IT-based collaboration solutions. A further barrier to adoption is the differential application of IT skills across the AEC industry. Therefore in order for a new technology to gain broad acceptance and be most beneficial it must be applicable to the broadest audience with the minimum investment required from all parties. The primary objective of this research is to preserve the rich design history of a project from conception to completion. Submitted information can be intelligently searched using the meta-data sourced from syndicated data feeds about team members, project timelines, work diaries and email communication. Once indexed users can tag documents and messages in order to provide a further, far richer layer of meta-data to assist in searching, identification of issues and semantic clarification. This strategy of defining AEC semantics through social interaction differs greatly from that of more complex, computer interpretable solutions such as Industry Foundation Classes. Rather than abstracting information to suit a generic yet highly intelligent building model, the emphasis is on preserving the participant’s own thoughts and conversation about decisions and issues in order to create a forum for intelligent conversation as the design evolves.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ijac20064307
id	ijac20064307
authors	Goldberg, Sergio Araya
year	2006
title	Computational Design of Parametric Scripts for Digital Fabrication of Curved Structures
source	International Journal of Architectural Computing vol. 4 - no. 3, 99-117
summary	This paper explores strategies for building toolchains to design, develop and fabricate architectural designs. It explains how complex curved structures can be constructed from flat standard panels. The hypothesis of this research is that by embedding ruled based procedures addressing generative, variational, iterative, and fabricational logics into early phases of design, both design techniques and digital fabrication methods can merge to solve a recurrent problem in contemporary architectural design, building double curved structures. Furthermore it achieves this using common fabrication methods and standard construction materials. It describes the processes of programming computational tools creating and developing designs to fabricate continuous complex curved structures. I describe this through a series of experiments, using parametric design environments and scripted functions, implementing certain techniques to fabricate these designs using rapid prototyping machines. Comparing different design and fabrication approaches I offer a discussion about universal application of programmed procedures into architectural design.
series	journal
last changed	2007/03/04 07:08

_id	2006_342
id	2006_342
authors	Lyon, Eduardo
year	2006
title	Component Based Design and Digital Manufacturing - A DfM Model for Curved Surfaces Fabrication using Three Axis CNC Router
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 342-350
doi	https://doi.org/10.52842/conf.ecaade.2006.342
summary	Through the use of design for manufacturing (DfM) method and looking at the relations between its potential application in architectural production and its implementation using digital manufacturing technologies, we analyze building construction processes and explore, in more detail curved surface fabrication using two dimensional cutting and three dimensional milling processes. Afterwards a DfM model for curved surfaces fabrication using three-axis computer numerical control (CNC) router is proposed. The proposed DfM model relies fundamentally in two supporting factors; the implementation of design heuristics that integrates production knowledge and the availability of some design related to production evaluation metrics. Subsequently, we test and refine the model using structured design experiences. This was accomplished by capturing new design heuristics and detecting useful evaluation metrics for production. In the final part of the research, a refined DfM model was tested in a component design case study. The case study is based on producing a curved surface module on wood for an existing proprietary component based wall system. As a summary, we conceptualize from this top-down development approach to create a design for manufacturing model that integrates design and construction in architecture, based on three possible applications fields: Design processes improvement, building production process improvement, CAD-CAM tools development. Our purpose is to provide better foundational constructs and approaches for integrating design with manufacturing in architecture.
keywords	Design for Manufacturing; Design Cognition; Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ed47
id	ed47
authors	Pektas S T, Pultar M
year	2006
title	MODELLING DETAILED INFORMATION FLOWS IN BUILDING DESIGN WITH THE PARAMETER-BASED DESIGN STRUCTURE MATRIX
source	Design Studies, 27(1), pp. 99-122
summary	The Architecture/Engineering/Construction (AEC) industry is one of the multidisciplinary domains in which collaboration among related parties is of utmost importance. Despite the intense flow of information between design professionals, there is a lack of research to better understand and manipulate these flows. Most of the current process modelling tools in the AEC industry do not enable analyses of iterative information cycles. Moreover, these tools represent the process at high levels, thus, they are inadequate for multi-parameter problems like building design. With a view to alleviate these problems, this paper introduces the use of parameter-based design structure matrix as a process modelling and system analysis tool for building design. The method reveals insights into the process structure, optimum sequence of parameter decisions, iterative cycles and concurrency in the process. The application of the method is demonstrated through a case study on suspended ceiling design in a real-life project.
keywords	design management; design processes; modelling; planning; information processing
series	other
type	normal paper
email
last changed	2005/12/01 15:47

_id	ascaad2006_paper8
id	ascaad2006_paper8
authors	Abdullah, Sajid; Ramesh Marasini and Munir Ahmad
year	2006
title	An Analysis of the Applications of Rapid Prototyping in Architecture
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	Rapid prototyping (RP) techniques are widely used within the design/manufacturing industry and are well established in manufacturing industry. These digital techniques offer quick and accurate prototypes with relatively low cost when we require exact likeness to a particular scale and detail. 3D modeling of buildings on CAD-systems in the AEC sector is now becoming more popular and becoming widely used practice as the higher efficiency of working with computers is being recognized. However the building of scaled physical representations is still performed manually, which generally requires a high amount of time. Complex post-modernist building forms are more faithfully and easily represented in a solid visualization form, than they could be using traditional model making methods. Using RP within the engineering community has given the users the possibility to communicate and visualize designs with greater ease with the clients and capture any error within the CAD design at an early stage of the project or product lifecycle. In this paper, the application of RP in architecture is reviewed and the possibilities of modeling architectural models are explored. A methodology of developing rapid prototypes with 3D CAD models using methods of solid freeform manufacturing in particular Fused Deposition Modeling (FDM) is presented and compared against traditional model making methods. An economical analysis is presented and discussed using a case study and the potential of applying RP techniques to architectural models is discussed.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2006_paper23
id	ascaad2006_paper23
authors	Ali, Rasha
year	2006
title	Islamic Architecture and Digital Databases
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	Epigraphy in Islamic architecture represented an indispensable element in its conceptual design and structure. Our research investigates this unique role, which epigraphy played in Islamic architecture as a tool singularizing this architecture and the sensuality it inspires inside a building while bestowing on it its particular identity. This how SADEPIG came to being: it is a virtual database regrouping all the information about the monumental epigraphy which date from the Sa‘dian period in Morocco (1527- 1660). The digital corpus of monumental Sa‘dian inscriptions provides also buildings plans, virtual tour within the monument, construction details, information about the identity of patron and builders.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2023_367
id	sigradi2023_367
authors	Andia, Alfredo
year	2023
title	Programmable Bio-Matter Architecture
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1797–1808
summary	Building with biology will be the most important platform to transform our planet in the next decades. Since 2006, Synthetic Biology (SynBio) has surfaced as the fastest-growing technology in human history. This field is allowing us to manipulate the genetic code, biology, food, and vaccines and ultimately aiming to reshape the very essence of existence. In this paper, we assess the development of SynBio and its impacts on architectural thinking, materials, and particularly in Architectural fiction. In this paper, we argue that there are at least three waves of impacts of SynBio technology in construction: Biomaterials, Engineered Living Materials (ELM), and Bio-Matter or biobots. We explore architectural thinking's domain, involving architects and engineers in research and startups. We embrace the architectural envisioning role and present our design work utilizing observed biological growth algorithms. Synthetic Biology urges questioning not only biomaterials but also the field's overarching vision.
keywords	Synthetic Biology, Bio-Architecture, Climate Change, Biotechnology, Architecture
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	ascaad2006_paper25
id	ascaad2006_paper25
authors	Artopoulos, Giorgos; Stanislav Roudavski and Francois Penz
year	2006
title	Adaptive Generative Patterns: design and construction of Prague Biennale pavilion
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This paper describes an experimental practice-based research project that considered design process, implementation and construction of a pavilion built to be part of the Performative Space section of the International Biennale of Contemporary Art, Prague 2005. The project was conceptualized as a time-bound performative situation with a parasite-like relationship to its host environment. Its design has emerged through an innovative iterative process that utilized digital simulative and procedural techniques and was formed in response to place-specific behavioral challenges. This paper presents the project as an in-depth case-study of digital methods in design, mass customization and unified methods of production. In particular, it considers the use of Voronoi patterns for production of structural elements providing detail on programming and construction techniques in relationship to design aspirations and practical constraints.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2006_paper6
id	ascaad2006_paper6
authors	Biloria, Nimish; Kas Oosterhus, and Cas Aalbers
year	2006
title	Design Informatics: a case based investigation into parametric design scripting and CNC based manufacturing techniques
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for manifesting complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This designresearch approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. A pattern of points attained from this intersection: ‘the point cloud’ serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed scriptroutines, iteratively run calculations to generate steel-wire frames, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct thus enabling timely and effective construction of the conceptualized form.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	acadia06_489
id	acadia06_489
authors	Bonswetch, T., Kobel, D., Gramazio, F., Kohler, M.
year	2006
title	The Informed Wall: applying additive digital fabrication techniques on architecture
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 489-495
doi	https://doi.org/10.52842/conf.acadia.2006.489
summary	In this work in progress report we present the results of a four week design studio with graduate students as part of a broader research project on investigating digital additive fabrication processes and their implications on architectural design.In a simple test arrangement we realized the digital design and additive fabrication of two by three meters brick walls. The use of bricks, being the primary module for construction, and at a relatively coarse resolution, allowed us to concentrate on the design of completely programmed walls encompassing material-dependent parameters. The resulting prototypes depict the great potential of the integration of the design and the fabrication process. Non-standardized solutions can be easily accomplished as the design data is directly used to control the fabrication process. In using an additive digital fabrication process, a novel architectural product of the kind “brick wall” emerged, which could not have been conceived or fabricated manually.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2006_786
id	2006_786
authors	Burry, Jane and Mark Burry
year	2006
title	Sharing hidden power - Communicating latency in digital models
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 786-793
doi	https://doi.org/10.52842/conf.ecaade.2006.786
summary	As digital spatial models take on the complex relationships inherent in a lattice of dependencies and variables, how easy is it to fully comprehend and communicate the underlying structure and logical subtext of the architectural model: the metadesign? The design of a building, the relationships between a host of different attributes and performances was ever a complex system. Now the models, the representations, are in the early stages of taking on more of that complexity and reflexivity. How do we share and communicate these modelling environments or work on them together? This paper explores the issue through examples from one particular associative geometry model constructed as research to underpin the collaborative design development of the narthex of the Passion Façade on the west transept of Gaudi’s Sagrada Família church, part of the building which is now in the early stages of construction.
keywords	Design communication; CAD CAM; mathematical models
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia06_232
id	acadia06_232
authors	Chaisuparasmikul, Pongsak
year	2006
title	Bidirectional Interoperability Between CAD and Energy Performance Simulation Through Virtual Model System Framework
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 232-250
doi	https://doi.org/10.52842/conf.acadia.2006.232
summary	The paper describes a novel approach involving interoperability, data modeling technology, and application of the building information model (BIM) focused on sustainable architecture. They share relationships and multiple experiences that have existed for years but have never have been proven. This interoperability of building performance simulation maps building information and parametric models with energy simulation models, establishing a seamless link between Computer Aided Design (CAD) and energy performance simulation software. During the last four decades, building designers have utilized information and communication technologies to create environmental representations to communicate spatial concepts or designs and to enhance spaces. Most architectural firms still rely on hand labor, drafted drawings, construction documents, specifications, schedules and work plans in traditional means. 3D modeling has been used primarily as a rendering tool, not as the actual representation of the project.With this innovative digitally exchange technology, architects and building designers can visually analyze dynamic building energy performance in response to changes of climate and building parameters. This software interoperability provides full data exchange bidirectional capabilities, which significantly reduces time and effort in energy simulation and data regeneration. Data mapping and exchange are key requirements for building more powerful energy simulations. An effective data model is the bidirectional nucleus of a well-designed relational database, critical in making good choices in selecting design parameters and in gaining and expanding a comprehensive understanding of existing data flows throughout the simulation process, making data systems for simulation more powerful, which has never been done before. Despite the variety of energy simulation applications in the lifecycle of building design and construction projects, there is a need for a system of data integration to allow seamless sharing and bidirectional reuse of data.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2006_245
id	caadria2006_245
authors	CHOR-KHENG LIM
year	2006
title	TOWARDS A FRAMEWORK FOR DIGITAL DESIGN PROCESS: In terms of CAD/CAM fabrication
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 245-252
doi	https://doi.org/10.52842/conf.caadria.2006.x.r2i
summary	This research aims to understand deeply the unique features of the CAD/CAM media tools and their applications, and come up with an initial framework of architectural design and construction process involving the use of CAD/CAM fabrication aids.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	2006_832
id	2006_832
authors	El-Khoury, Nada; De Paoli Giovanni and Dorta Tomás
year	2006
title	Digital Reconstruction as a means of understanding a building’s history - Case studies of a multilayer prototype
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 832-839
doi	https://doi.org/10.52842/conf.ecaade.2006.832
summary	The experiments presented in this paper are situated at the crossroads of two fields: the understanding and communication of history to students and the field of Information and Communication Technologies (ICT). More specifically, we aim to propose to students, ways of transferring information about lifestyles and techniques linked to the construction methods used in the past and which are present in ancient sites. It is not merely a question of proposing experiments for managing an inventory of knowledge such as that summarized in historical texts, but rather a means for understanding it: How do we communicate the invisible? How do we make visible what we cannot see but that we can imagine lies beneath the ruins of ancient sites? Lastly, how do we propose new approaches in the transferring of these historic skills and lifestyles? Such are the questions that the students’ experiments will attempt to answer while using computers as cognitive tools. In this case, these cognitive tools are designated as “multilayer prototypes” which aim to develop a dynamic virtual history space through augmented reality.
keywords	ICT; Byblos; multilayer prototype; augmented reality; education research
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ijac20064203
id	ijac20064203
authors	Eng, Markus; Camarata, Ken; Do, Ellen Yi-Luen; Gross, Mark D.
year	2006
title	FlexM: Designing a physical construction kit for 3d modeling
source	International Journal of Architectural Computing vol. 4 - no. 2, 27-47
summary	We have designed a hub and strut kit that interfaces to a 3D graphics application. FlexM is a prototype flexible physical interface for manipulating and building 3D geometry. Using the FlexM hub and strut components, designers can build and explore 3D geometry with the ease of a toy and the power of a computer. The hubs transmit the model's topology and geometry to the computer, where the model is rendered on the screen in real time. The paper reports on the iterative development of several versions of the project.
series	journal
last changed	2007/03/04 07:08

_id	2006_506
id	2006_506
authors	Fioravanti, Antonio and Rinaldo Rustico
year	2006
title	x-House game - A Space for simulating a Collaborative Working Environment in Architecture
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 506-511
doi	https://doi.org/10.52842/conf.ecaade.2006.506
summary	The research consists of the set up of a game simulating a e Collaborative Working Environment – CWE – in Architectural Design. The use of a game is particularly useful as it makes it possible to simplify the complex terms of the problem and, through the game itself, makes it easier to study knowledge engineering tools, communication protocols and the areas of an ICT implementation of a general model of collaborative design. In the following several characteristics of the game are given (also with reference to other games) such as; participating actors (Wix 1997), the “pieces” (construction components) used, the modular space employed, the PDWs/SDW dialectics, the screenshot of the interface prototype, the score.
keywords	Architectural Design; CWE; Game; Representation Model; KBs
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: