Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	acadia06_232
id	acadia06_232
authors	Chaisuparasmikul, Pongsak
year	2006
title	Bidirectional Interoperability Between CAD and Energy Performance Simulation Through Virtual Model System Framework
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 232-250
doi	https://doi.org/10.52842/conf.acadia.2006.232
summary	The paper describes a novel approach involving interoperability, data modeling technology, and application of the building information model (BIM) focused on sustainable architecture. They share relationships and multiple experiences that have existed for years but have never have been proven. This interoperability of building performance simulation maps building information and parametric models with energy simulation models, establishing a seamless link between Computer Aided Design (CAD) and energy performance simulation software. During the last four decades, building designers have utilized information and communication technologies to create environmental representations to communicate spatial concepts or designs and to enhance spaces. Most architectural firms still rely on hand labor, drafted drawings, construction documents, specifications, schedules and work plans in traditional means. 3D modeling has been used primarily as a rendering tool, not as the actual representation of the project.With this innovative digitally exchange technology, architects and building designers can visually analyze dynamic building energy performance in response to changes of climate and building parameters. This software interoperability provides full data exchange bidirectional capabilities, which significantly reduces time and effort in energy simulation and data regeneration. Data mapping and exchange are key requirements for building more powerful energy simulations. An effective data model is the bidirectional nucleus of a well-designed relational database, critical in making good choices in selecting design parameters and in gaining and expanding a comprehensive understanding of existing data flows throughout the simulation process, making data systems for simulation more powerful, which has never been done before. Despite the variety of energy simulation applications in the lifecycle of building design and construction projects, there is a need for a system of data integration to allow seamless sharing and bidirectional reuse of data.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	bsct_tsiopoulou
id	bsct_tsiopoulou
authors	Tsiopoulou, Chamaidi
year	2006
title	Calibrated Sky Luminance Maps for Daylight Simulation
source	Vienna University of Technology; Building Science & Technology
summary	Building design and control applications can benefit from daylight simulation. Sky models help to model the sky conditions and predict the availability of daylight in indoor environments. Sky luminance is changing according to the weather, the season of the year and the time of the day, therefore it is difficult to create an accurate sky model. The simplified models that are currently used for computational simulation do not take into account these constant changes. It is important to test if there is the possibility of creating a sky model that approaches the characteristics of real sky and provides the architects with more precise daylight predictions. As past research has demonstrated, relatively low-cost sky luminance mapping via digital imaging can provide an alternative to highly sophisticated sky scanners and support the provision of information on sky luminance distribution patterns on a more pervasive basis. The aim of this research is first to explore the potential of deriving sky luminance distribution maps based on digital imaging and then to test their efficiency for the prediction of indoor daylight. A comparison is made between the predictions based on existing sky models (CIE Standard Skies and Perez All-weather sky) and the camera-based sky model. Thus, the effects of the selection of the sky model on indoor daylighting prediction are explored. A set of measurements were performed at the roof of the TU Vienna in order to obtain the necessary data. The horizontal illuminance levels due to 12 sky sectors were measured with the help of a sky monitoring device. A scale (1:5) model of an architectural space was used to measure the indoor illuminance values with the help of three sensors. At the same time, images of the sky were obtained with the help of a digital camera with a fish-eye converter. Luminance values were derived from the images and four calibration methods were used to generate accurate sky luminance distribution maps. These variously calibrated luminance values were then compared with the corresponding photometric measurements. Finally, the application of a digitally derived sky model based on the best calibration method was compared with the other two sky models toward the prediction of indoor illuminance levels using the case of the scale model. The results demonstrated that the camera-based sky model was more reliable than the other two sky models. It was concluded that digital imaging combined with parallel photometric calibration can provide a valuable means for a real-time generation of sky luminance maps. Detailed sky luminance models can be generated and their application can increase the predictive accuracy of the computational daylight prediction tools. Moreover, the reliability of daylight simulation can be increased toward supporting the design process and the operation of daylighting systems in buildings.
keywords	Daylight simulation; sky luminance mapping; digital imaging; sky models.
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2006/07/02 22:33

_id	2006_342
id	2006_342
authors	Lyon, Eduardo
year	2006
title	Component Based Design and Digital Manufacturing - A DfM Model for Curved Surfaces Fabrication using Three Axis CNC Router
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 342-350
doi	https://doi.org/10.52842/conf.ecaade.2006.342
summary	Through the use of design for manufacturing (DfM) method and looking at the relations between its potential application in architectural production and its implementation using digital manufacturing technologies, we analyze building construction processes and explore, in more detail curved surface fabrication using two dimensional cutting and three dimensional milling processes. Afterwards a DfM model for curved surfaces fabrication using three-axis computer numerical control (CNC) router is proposed. The proposed DfM model relies fundamentally in two supporting factors; the implementation of design heuristics that integrates production knowledge and the availability of some design related to production evaluation metrics. Subsequently, we test and refine the model using structured design experiences. This was accomplished by capturing new design heuristics and detecting useful evaluation metrics for production. In the final part of the research, a refined DfM model was tested in a component design case study. The case study is based on producing a curved surface module on wood for an existing proprietary component based wall system. As a summary, we conceptualize from this top-down development approach to create a design for manufacturing model that integrates design and construction in architecture, based on three possible applications fields: Design processes improvement, building production process improvement, CAD-CAM tools development. Our purpose is to provide better foundational constructs and approaches for integrating design with manufacturing in architecture.
keywords	Design for Manufacturing; Design Cognition; Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2006_e160c
id	sigradi2006_e160c
authors	Andrade, Max and Cheng, Liang-Yee
year	2006
title	Diretrizez Geométricas de Auxílio ao Processo de Projeto de Edifícios Residenciais [Geometrical Guidelines to Aid the Design of Floor Plants of Residential Buildings]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 243-247
summary	This paper discusses the basic principles of a geometric method to aid the design process of residential buildings. It makes part of the initial phases of a research whose aim is to develop a computer system to aid the sketching and evaluation of floor plant design of multi-storied residential buildings. The fundamental idea of the research is the existence of some basic patterns of floor plants that reflect the designer’s mental models in this category of building. The models are regarding the usage of the space such as forms and dimensions, the elements for the circulation and the external skins. During the design process, architects work on each one of these models to generate the sketches of the floor plant layout. Generally, the layout of an apartment in multi-storied buildings depends basically on the internal dynamics of the users without the complex relationship with the neighborhood environment as in the case of houses. In this way, it would be easier to identify, to organize and to associate the mental models of multi-storied buildings on geometric basis, which, in their turns, might be effectively used as inputs for the layout planning of new design. By applying the geometric basis, the architects may reduce the universe of feasible alternatives into a small group of heuristic solutions that can be described by using few simple guidelines. In addition to this, the geometric bases of the existing buildings might be used to build a knowledge-based system to aid the architectural design. The objective of this paper is to show some initial results of the research obtained from a survey and the case studies of form, dimensions and topology of existing buildings. To limit the scope of the discussion, only residential buildings with two to three bedrooms are considered. At first, a survey of plants of residential buildings with two and three bedrooms, in Brazil, is carried out. In the next step, the dimensions, shape, external skin perimeter, circulation system and accessibility are analyzed. Finally, typical topologies of the building are investigated.
keywords	Design process; geometric method; residential buildings
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia06_230
id	acadia06_230
authors	Anzalone, Phillip
year	2006
title	Synthetic Research
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 230-231
doi	https://doi.org/10.52842/conf.acadia.2006.230
summary	Synthetic Research insinuates a relationship of a meticulous process of discovering truth contradicted against a fabricated, as in concocted, reality. It is important to recognize the logical aspect of synthetic when examining what synthetic research can provide for architectural discourse. Synthesis contrasts with analysis in that it’s primary methods involve recourse to experience; it is experience that is at the heart of synthetic research. The synthesis of theory, architectural constructions, technological artifacts and computational techniques requires experiencing the results of experimentation. Synthetic digital architecture necessitates a discovery process incorporating creation that allows for experience, be it virtual reality, full-scale prototyping or spatial creations; provided experience is a truthful one, and not disingenuous and thereby slipping into the alternate definition of synthetic.Research’s experimental arm, as opposed to the analytic, relies on tinkering - implying the unfinished, the incomplete, the prototype. Examples of this are everywhere. Computer screenshots are a strikingly literal example of synthetic research when used as a means of experiencing a process. Performance mock-ups of building assemblies are a method of synthetic research in that one experiences a set of defined performances in order to discover and redefine the project. The watchmaker craft is an exercise in research/experimentation where material properties are inherent in function and aesthetics; consider how the components interact with the environment - motion, gravity, space-time, temperature. Efficiency at this point is predominantly structural and physical. Decorative or aesthetic elements are applied or integrated in later iterations along with optimization of performance, marketing and costs.What is a architectural research? How can research synthesize the wide range of possibilities for the trajectory of architecture when engaged in digital and computational techniques? The goals, techniques, documentation and other methods of research production have a place in architecture that must be explored, particularly as it related to computation. As in other fields, we must build a legitimate body of research whereby others can use and expand upon, such that digital architectures evolve in innovative as well as prosperous paths.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia06_148
id	acadia06_148
authors	Cabrinha, Mark
year	2006
title	Synthetic Pedagogy
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 148-149
doi	https://doi.org/10.52842/conf.acadia.2006.148
summary	As tools, techniques, and technologies expand design practice, there is likewise an innovation in design teaching shifting technology from a means of production and representation to a means of discovery and development. This has implications on studio culture and design pedagogy. Expanding the skills based notion of digital design from know-how, or know-how-to-do, toward know-for, or knowledge-for-action, forms a synthetic relationship between the skills necessary for action and the developing motivations of a young designer. This shifts digital design pedagogy to a medium of active inquiry through play and precision. As digital tools and infrastructure are now ubiquitous in most schools, including the increasing digital material exchange enabled through laser cutters, CNC routers, and rapid prototyping, this topic node presents research papers that engage technology not simply as tools to be taught, but as cognitive technologies which motivate and structure a design students knowledge, both tacit and explicit, in developing a digital and material, ecological and social synthetic environment. Digital fabrication, the Building Information Model, and parametric modeling have currency in architectural education today yet, beyond the instrumentality of teaching the tool, seldom is it questioned what the deeper motivations these technologies suggest. Each of these tools in their own way form a synthesis between representational artifacts and the technological impact on process weaving a wider web of materials, collaboration among peers and consultants, and engagement of the environment that the products of design are situated in.If it is true that this synthetic environment enabled by tools, techniques, and technologies moves from a representational model to a process model of design, the engagement of these tools in the design process is of critical importance in design education. What is the relationship between representation, simulation, and physical material in a digitally mediated design education? At the core of synthetic pedagogies is an underlying principle to form relationships of teaching architecture through digital tools, rather than simply teaching the tools themselves. What principles are taught through teaching with these tools, and furthermore, what new principles might these tools develop?
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia06_302
id	acadia06_302
authors	Clarke, Cory
year	2006
title	Synthetic Dissemination
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 302-303
doi	https://doi.org/10.52842/conf.acadia.2006.302
summary	Synthetic Dissemination, within the context of architecture and information culture, offers seemingly contradictory possibilities. The ends of dissemination and synthesis are at odds. The purpose of the former being diffusion and distribution, and the byproduct of the latter being quite the opposite - namely the combination and association of information into a coherent whole. The conjoining of dissemination and synthesis implies these two contradictory operations can operate in a symbiotic or complementary manner.Relative to architecture and design the combination of dissemination and synthesis is potentially profound. The marriage of synthesis and dissemination presents a possibility that the method of distributing information could be, or have embedded within it, a synthetic process. In the simplest sense synthetic dissemination implies that the tools for design and synthesis could be the same as tools for documentation and dissemination; or more specifically that the fluidity and creativity of design software could be coupled with the practicality and meticulousness of building information modelers (BIM). More abstractly synthetic dissemination implies that the means of encoding and distributing information could propagate design. Architects have readily adopted digital tools for encoding and presenting their ideas, but have not fully recognized how the informational structures of these applications promote or hinder design. Developments in the information architecture of D software, such as the shift from geometrically based data structures to procedurally based directed action graphs (DAG) as seen in Maya and DMax, have opened up innovative methods of architectural design. Each new change in the information architecture of design software ushers in new approaches to design, raising the question - how does the production and storage of information affect design? More broadly, how can the tools of dissemination facilitate synthesis?
series	ACADIA
email
last changed	2022/06/07 07:56

_id	acadia06_540
id	acadia06_540
authors	Diewald, J., Frederick, M.
year	2006
title	Building Information Modeling: Interactive Versioning Experiment
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 540-541
doi	https://doi.org/10.52842/conf.acadia.2006.540
summary	Interactive Versioning, is the first experiment of an ongoing investigation into the conceptual role of parametric modeling in the design process. In this case, the form is defined by constrained floor-plate relationships. Originally testing methods using numerical values exported to excel, we obtained undesirable results and shifted our focus to the creation of an interactive model; restoring the direct influence of user input. The result is a 10-floor structure that allows the user to tweak point locations along the slab perimeters that in turn have global effect on the overall geometry of the architectural body. We are using four point definition types: reference above, interactive reference, reference below, and independent value. Interactive reference points use referential constraints defined as x and y distances from the global origin, which change on account of user inputs. Reference above points pull (x,y) values from an interactive point above. Reference below points pull (x,y) values from interactive points below. Independent points are unaffected by changes in any of the other points but may also be tweaked to adjust a form. On any given level, there are 2 interactive reference points, 2 reference above points, 2 reference below points, and 4 independent points. Additionally, 2 length constraints link interactive points with reference above points on the same level. This allows for changes to affect the entire structure rather than only the floor plates immediately above and below a given change. The addition of constraints to the floor outlines will yield a variety of formal results and offer the possibility to further control the output.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2006_234
id	2006_234
authors	Donath, Dirk and Christian Tonn
year	2006
title	Complex design strategies using building information models - Evaluation and interpretation of boundary conditions, supported by computer software
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 234-243
doi	https://doi.org/10.52842/conf.ecaade.2006.234
summary	The choice of a chord and its execution should be regarded as a must and not left to arbitrary wish or superficial speculation. (Johannes Itten, 1961) The paper describes a modular concept for the IT-support of planning practice using BIM (Building Information Modelling) and a parameterized building model. The platform used is the modularized software concept for architectural planning in existing built contexts (prototype software FREAK). The current progress in the development of a reasoned support of planning tasks is described in this paper in more detail. The system consists of a series of software prototypes which are linked to the BIM, utilize the specific data within and demonstrate the value of a consistent and extendable CAD-model. The “Colored Architecture” software prototype is one such design-support module of the software platform and enables the designer to experiment with the parameters colour, light and materials in architectural space. This module supports experimentation, assessment and realization of colours and materials in the architectural design process on a new quality. For instance, the integration of “live radiosity” light simulation allows a qualified and interactive assessment and evaluation of colours and materials in near-real lighting conditions. The paper also details further software prototypes, modules and concepts including building surveying and the design of self-supporting domed structures.
keywords	Design; Parameterized Building Information Modelling; Plausibility; Planning Support; Colour, Material and Light Design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	eaea2005_31
id	eaea2005_31
authors	Franke, Ronald
year	2006
title	Space imagery - Model simulation as work equipment
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 31-36
summary	The architectural design task involves the development of a building or an urban space, which communicates a social and cultural meaning and allows sensual experiences. Therefore, there is a need to design the building or urban space from the users view. In order to achieve this aim, architects use different methods and techniques of representation such as various kinds of drawings, models and images. The main impact of this is: Creating and developing the architectural form by drawing or modelling the architectural form. By using Video-Supported- Model-Simulation the benefits of representation can be utilised in a very simple way. The following report gives an introduction to - the method of Video-Supported-Model-Simulation - the principles for organisation the process of architectural design
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	sigradi2006_e171c
id	sigradi2006_e171c
authors	González Böhme, Luis Felipe and Vargas Cárdenas, Bernardo
year	2006
title	Foundations for a Constraint-Based Floor Plan Layout Support in Participatory Planning of Low-Income Housing
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 283-287
summary	We introduce the foundations of a novel approach that deals with constraint-based design methods to supporting participatory planning processes of low-income dwellings. We examine the space allocation problem inside the architectural domain on the basis of graph theory and combinatorics, providing a concise mathematical background for an implementation strategy called FLS (Floor plan Layout Support), which is analyzed here for the first time regarding this particular context of application. The philosophy underlying a design method that is mainly driven by the formulation of distinct constraints suggests to avoid the traditional procedure of first to create a yet not necessarily valid instance of the eventual design solution by directly choosing specific parameter values of its shape, and later on to evaluate its validity by confronting the designed model to a set of applicable constraints. Instead, constraint-based design poses a search procedure that operates in a space of planning-relevant constraint sets. The FLS methodology integrates some few principles of constraint-based automated reasoning with high user interactivity, into a design environment where as much dwellers as planners can collaboratively work in solving spatial organization problems of housing projects. The FLS model of application makes use of a combination of dweller-specified constraints, planning and zoning regulations, and a small library of modular space units. Constraint-based design ! methods are particularly capable of supplying efficient support for the collaborative involvement of dwellers into the architectural programming process of her/his own home. Mainly, because dwellers themselves tend to describe their space need and design intentions as a set of constraints on room quantity, space utilization, circulation system, allocation of available furniture, available budget, construction time, and so forth. The goal is to achieve an integrated tool for finding and modelling topologically valid solutions for floor plan layout alternatives, by combining user-driven interactive procedures with automatic search and generative processes. Thus, several design alternatives can be explored in less time and with less effort than using mainstream procedures of architectural practice. A FLS implementation will constitute one system module of a larger integrated system model called Esther. A FLS tool shall interact with other functional modules, like e.g. the BDS (Building Bulk Design Support), which also uses constraint-based design methods. A preliminary procedural model for the FLS was tested on Chile’s official social housing standards (Chilean Building Code – OGUC. Art. 6.4.1) which are very similar to most Latin American housing programs currently in operation.
keywords	constraint-based design; floor plan layout; participatory planning; low-income housing; design theory; design proces
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ijac20053402
id	ijac20053402
authors	Janssen, Patrick H.T.; Frazer, John H.; Tang, Ming-Xi
year	2005
title	A Framework For Generating And Evolving Building Designs
source	International Journal of Architectural Computing vol. 3 - no. 4, 449-470
summary	This paper describes a comprehensive framework for generative evolutionary design. The key problem that is identified is generating alternative designs with an appropriate level of variability. Within the proposed framework, the design process is split into two phases: in the first phase, the design team develops and encodes the essential and identifiable character of the designs to be generated and evolved; in the second phase, the design team uses an evolutionary system to generate and evolve designs that embody this character. This approach allows design variability to be carefully controlled. In order to verify the feasibility of the proposed framework, a generative process capable of generating controlled variability is implemented and demonstrated.
series	journal
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00002
last changed	2007/03/04 07:08

_id	acadia06_079
id	acadia06_079
authors	Kumar, Shilpi
year	2006
title	Architecture and Industrial Design A Convergent Process for Design
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 79-94
doi	https://doi.org/10.52842/conf.acadia.2006.079
summary	The use of technology has grown with the way design professions have evolved over time. Changing needs, desires of comfort, and perceptions of the consumers have led to a distinct improvement in the design of both product and architecture. The use of the digital media and emerging technologies has brought a dramatic change to the design process allowing us to view, feel, and mould a virtual object at every stage of design, development, and engineering. Change is often quick and easy since a virtual product does not inherently carry the biases of its physical counterpart. In order to communicate ideas across the team, digital processes are also used to bring together opinions, experiences, and perspectives. These methods encourage decision making based on information rather than prejudice or instinct. Thus, digital exchanges (technology) impact firm strategies at three levels: product, process, and administrative or support activities (Adler 1989).Digital tools for design exchange in Industrial Design (ID) began much earlier than many other professions. The profession of Architecture is also slowly moving to a similar model with digital exchange finding increasing prevalence in drawing, modeling, performance simulation, design collaboration, construction management, and building fabrication. The biggest problem is the disintegrated use of technology in the architectural profession without a strategy toward streamlining the design process from conception to fabrication. In this paper we investigate how the use of technology has evolved in the professions of Industrial Design and Architecture comparatively in their product, process, and support activities. Further, we will present a set of guidelines that will help architects in the convergence of design process, helping in a more efficient work flow with a strategic use of digital technology.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	caadria2006_269
id	caadria2006_269
authors	MATTHIAS HAASE, ALEX AMATO
year	2006
title	ND MODELLING FOR SUSTAINABLE ENVELOPES: The sustainable dimensions of envelope design
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 269-276
doi	https://doi.org/10.52842/conf.caadria.2006.x.e6l
summary	Sustainable development issues are currently the driving forces in many building projects. The building envelope is critical for the architectural expression as well as large parts of the environmental performance. This study tries to investigate the advantages of multidimensional computer aided modeling and simulation for a sustainable facade design approach. A first step towards nD modeling for sustainable design is to establish a list of parameter which are used as design criteria: Environmental performance, thermal visual and acoustic comfort. Computer simulation and analysis of different building elements can help to determine the performance according to a set of design parameter. Environmental impacts due to energy consumption are an important parameter but it is believed that comfort criteria need also to be accounted for.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	sigradi2006_e151c
id	sigradi2006_e151c
authors	Neumann, Oliver and Schmidt, Daniel
year	2006
title	CNC Timber Framing – Innovative Applications of Digital Wood Fabrication Technology
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 304-307
summary	The discourse on depleting natural resources and compromised environments have led to extended research on sustainable designs methods, building practices and materials. Beyond the actual performance of building products and components, research on sustainable building increasingly focuses on the long-term effects of the production, application and life cycle of building materials on the natural environment, human inhabitation and quality of life. Computer aided manufacturing technologies play a significant role not only in the transformation of design and building methods, but also in an extended discourse on cultural development. Globally available technologies connect the design and building process to a broad range of long-term ecological factors by creating a correlation between "the emergent political, economical and social processes and … architectural techniques, geometries and organization." Through this interrelationship to economy and culture, technology and its applications are also directly related to notions of place and territory as well as to fundamental ideas of ecology. The collaborative research and design study for an outdoor theater roof structure at the University of British Columbia Malcolm Knapp Research Forest at Maple Ridge, B.C., Canada, focuses on the use of digital media in prefabrication and material optimization. By utilizing small square section timber and minimizing the use of alienating connectors the research on the wood roof structure illustrates the potential of a design culture that seeks innovation in a broader understanding of ecology routed in regional culture, environmental conditions, economy and tradition. Labor intensive manufacturing techniques are redefined aided by computer controlled machines and virtual modeling of complex geometries is translated into simple operations. The result is a more sensible and accurate response to the place’s demands. In order to generate innovative design interventions that make a constructive long-term contribution to the preservation, maintenance and evolution of the environment, design needs to be based on a comprehensive understanding of its context and the distinctive qualities of the materials used. Following the example of the outdoor roof structure, this paper aims to define innovative design as work that resonates at the intersection of the fields of technology, material science, manufacturing processes, techniques of assembly and context that constitute the expanded context or complex ecology that projects need to engage. It is in design research studies like for the outdoor theater roof structure with focus on CNC wood fabrication technologies that the common design and building discourse is put to question, boundaries are explored and expanded and the collective understanding is improved towards ecological design.
keywords	CNC Wood Fabrication; Design Innovation; Ecology
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	caadria2006_495
id	caadria2006_495
authors	R. SATO, W. YEO, A. KAGA, M. OYAMA
year	2006
title	NEW METHODS FOR URBAN DESIGN AND ARCHITECTURE USING THE VR TECHNIQUE AND ANALYSIS OF THE PSYCHOLOGICAL INFLUENCE
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 495-501
doi	https://doi.org/10.52842/conf.caadria.2006.x.p0n
summary	Urban plan and architecture require the use of VR systems. We adapted the buildings into a VR system, and then performed a virtual realization in the world’s largest dome at Matsushita Electric Works, Ltd. Walking or flying through life-size space was enabled. We viewed the planned future scenes that featured real size, space composition, and a simulated environment. The construction, the materials and colors of the building were examined. In addition, VR system on PC was applied to city planning and architectural design and a number of novel functions were added to the VR system by plug-in, which assisted and facilitated the design process. The stereoscopic thinking mode in 3-D space can inspire and comprehend more directly the ideas of design, and confirm the intended effects. We accordingly carried out a further study on users operating the VR system to investigate their responses of “like” or “dislike” towards the real time adjustments of design effect at identical viewpoints. Fractals analysis was conducted to demonstrate physically the influence of real time 3-dimentional design and presentation on the psychological trends of subjective judgment. Our findings pave the way for future research on monitoring psychological impacts on observers of VR system during design process.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ascaad2006_paper14
id	ascaad2006_paper14
authors	Techel, Florian
year	2006
title	Future of Communicating Digital Design in Architecture: overcoming the divisive power of Computer Aided Design
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	A few decades ago architects, engineers and the building industry relied on a set of self-developed tools for drawing and standards for communication within the profession and beyond. Everyone involved in the process of building understood these standards that were developed, controlled and updated by the profession. Today the situation appears more ambiguous. The introduction of Digital Media, and specifically Computer Aided Design, has greatly enhanced the potential for productivity gains. On the other hand, the lack of standardized open file exchange formats in CAD has created communication barriers by making data exchange more confusing and ambiguous. Frequently this has consumed the very productivity gains that were originally envisioned by industry. Problems with proper and fluent data exchange between software applications to no small extent are due to fundamental disagreements between software designers on the proper digital description of a building, leading to nearly insurmountable communication obstacles, designed to potentially divide the profession, practitioners and the educational environment. Consequently construction has not partaken in the productivity gains that other industries have enjoyed. Proprietary file formats and closed software systems have fostered the development of design camps that rally behind one software. Others reluctantly buy into certain “solutions” for they are perceived to be standards. Innovation is hampered as development of industry design tools is no longer controlled by architects, engineers and the construction sector but instead by private software companies frequently pursuing their Based on 20 years of experience with CAD in the profession and academia this paper critically investigates the status quo of CAD in the building industry. It points towards strategies of overcoming the current problematic situation and putting the profession back in control of its own communication process.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2006_e048c
id	sigradi2006_e048c
authors	Beck, Mateus Paulo; Brener, Rafael; Giustina, Marcelo and Turkienicz, Benamy
year	2006
title	Light and Form in Design – A Computational Approach
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 254-257
summary	Shape perception is strongly influenced by the reciprocal relation between light and form. Computational applications can increase the number of design alternatives taking into account possible variations in the relation between light and form. The aim of this study is to discuss a pedagogical experience carried out with 5th semester architectural students, based on a series of exercises prior to the term project. The exercises were concerned with the relation between light and form from an aesthetical point of view and should be understood as examples for the use of computers as tools to creatively accelerate the process of design and learning. The paper is divided in five parts. The first one describes the conceptual background for the exercises, a descriptive method for the identification of light effects in architectural objects based on ideas of shape emergence. The exercises’ methodology is explained in the second part, referring to the use of computational applications in 3-dimensional modeling, material and light simulation. The methodology includes different phases: –creation of bi-dimensional compositions according to symmetry operations; –creation of a minimal living space assigning functions to spaces originated from the former composition; –analysis of the impact of light on the form and spaces created; –alteration of form and materials creating new light effects considering the functions related to the spaces. The exercises alternate work in computational environment in two and three dimensions with the use of mockups, lamps and photography. In the third part the results –student’s design steps– are described. In the fourth part the results are analyzed and some conclusions are outlined in the fifth and last part. The use of emergent forms combined with computational tools has proved to be an effective way to achieve an accelerated understanding of the impact of light on forms as demonstrated by the evolution of the students work during the term and by their final results concerning the term project.
keywords	Architectural Design; Lighting; Design Simulation; Virtual Environment
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2009_046
id	caadria2009_046
authors	Haeusler, Matthias Hank
year	2009
title	Modulations of Voxel Surfaces Through Emotional Expressions to Generate A Feedback Loop Between Private Mood and Public Image
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 173-182
doi	https://doi.org/10.52842/conf.caadria.2009.173
summary	My proposal is an investigation into the perceptual boundaries between human and architectural expression. It asks how architecture can creatively adopt human expression by using the emotions ‘displayed’ on the ‘surface face’ as a generator for displaying a surface on a voxel façade to achieve a cross-connecting perceptual change with modulations through emotion (Massumi, 2006). Through voxel facades the public with their expressed emotions will be included in the decision process of defining space, by expressing our innermost feelings through an architectural medium. Thus emotions of the individual have a platform and can be conveyed indirectly to the public, and in turn open up discussions about the state of the community through the state of the façade. An alliance of media and place in an urban context can be achieved and created, with the participation of its inhabitants, along with a new perception of how media and architecture can together shape and inform spatial relations for a feedback loop between private mood and public image.
keywords	Voxel façade; simulation; human-environment interaction; dynamic space
series	CAADRIA
email
last changed	2022/06/07 07:49

For more results click below: