Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 19 of 19

Reformat results as: short short into frame detailed detailed into frame

_id	2006_128
id	2006_128
authors	Kouzeleas, Stelios Th. and Kimon D. Papadimitriou
year	2006
title	Real-time remote 3D digitizing and modelling
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 128-131
doi	https://doi.org/10.52842/conf.ecaade.2006.128
summary	This paper describes a procedure that feeds remotely a modelling system with geographical coordinates and the relative measurements taken in place in order to model dynamically new entities in real-time. The operation of this system is based on methodologies that are commonly used in telegeoprocessing – telegeomonitoring systems and its purpose is to simulate in real-time an existing environment using the captured measurements. The direct input of geographic data to the proposed system, which is adapted to a modelling environment (CAD or GIS), triggers the creation of new 3D entities in real-time (points, linear or area features), as it could be done with a traditional tablet digitizer. Simultaneously, the proposed system represents thematically the properties of the modelling entities (according to the measured values) over a 3D mesh. The aim of the suggested system is the remote registration of additional spatial information, their adequate treatment and adjustment via special developed interfaces, including their representation via developed software which is applied in the AutoCAD environment because of its programming development support and its use by a variety of engineers.
keywords	Real-time modelling; Digitizing; Cartographic simulation; GIS
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2006_e165b
id	sigradi2006_e165b
authors	Angulo, Antonieta
year	2006
title	Optimization in the Balance between the Production Effort of E-learning Tutorials and their related Learning Outcome
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 122-126
summary	This paper provides evidence on the level of media richness that may be cost effective in the development of e-learning tutorials for teaching and learning computer visualization techniques. For such a purpose the author provides an analysis of low-cost / high-impact media rich products, the effort and cost required in their development and the measurement of related learning outcomes. Circa twenty years of R&D of multimedia and hypermedia applications for instruction have demonstrated the benefits of communicating relevant information to learners using engaging media. Based on this evidence, this paper assumes that due to the cognitive style of design students, the instructional packages for learning computer techniques for design visualization that are rich in media content, tend to be more effective. Available visualization technologies make the development of e-learning tutorials feasible and apparently the logical way to implement our instructional packages. However the question in the development of e-learning tutorials becomes a more strategic one when we are called to reach a level of optimization between producing a package with a basic standard, namely; text & still-graphic based tutorials, or a state-of-the-art package that is based on video demonstrations (more than enough?) that can accommodate the students’ learning requirements and also our production costs. The costs include the human resources (instructor, producers, assistants and others) and the material resources (hardware and software, copies, and others) involved in the creation of the e-learning tutorials. The key question is: What is good enough, and what is clearly superfluous? In order to confirm our hypothesis and propose a relevant balance between media richness and learning effectiveness, this paper describes an experiment in the use of two different levels of media richness as used to deliver instructions on the production of computer animations for design visualization. The students recruited for this experiment were fairly familiarized with the use of 3D modeling concepts and software, but had no previous knowledge of the techniques included in the tutorials; in specific; camera animation procedures. The students, separated in two groups, used one of the two methods; then they proceeded to apply their newly acquired skills in the production of an animation without using the help of any external means. The assessment of results was based on the quality of the final product and the students’ performance in the recall of the production procedures. Finally an interview with the students was conducted on their perception of what was accomplished from a metacognitive point of view. The results were processed in order to establish comparisons between the different levels of achievement and the students’ metacognitive assessment of learning. These results have helped us to create a clear set of recommendations for the production of e-learning tutorials and their conditions for implementation. The most beneficial characteristics of the two tested methods in relation to type of information, choice of media, method of information delivery, flexibility of production/editorial tools,! and overall cost of production, will be transferred into the development of a more refined product to be tested at larger scale.
keywords	e-learning tutorials; media richness; learning effectiveness; cognitive style; computer visualization techniques
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia06_230
id	acadia06_230
authors	Anzalone, Phillip
year	2006
title	Synthetic Research
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 230-231
doi	https://doi.org/10.52842/conf.acadia.2006.230
summary	Synthetic Research insinuates a relationship of a meticulous process of discovering truth contradicted against a fabricated, as in concocted, reality. It is important to recognize the logical aspect of synthetic when examining what synthetic research can provide for architectural discourse. Synthesis contrasts with analysis in that it’s primary methods involve recourse to experience; it is experience that is at the heart of synthetic research. The synthesis of theory, architectural constructions, technological artifacts and computational techniques requires experiencing the results of experimentation. Synthetic digital architecture necessitates a discovery process incorporating creation that allows for experience, be it virtual reality, full-scale prototyping or spatial creations; provided experience is a truthful one, and not disingenuous and thereby slipping into the alternate definition of synthetic.Research’s experimental arm, as opposed to the analytic, relies on tinkering - implying the unfinished, the incomplete, the prototype. Examples of this are everywhere. Computer screenshots are a strikingly literal example of synthetic research when used as a means of experiencing a process. Performance mock-ups of building assemblies are a method of synthetic research in that one experiences a set of defined performances in order to discover and redefine the project. The watchmaker craft is an exercise in research/experimentation where material properties are inherent in function and aesthetics; consider how the components interact with the environment - motion, gravity, space-time, temperature. Efficiency at this point is predominantly structural and physical. Decorative or aesthetic elements are applied or integrated in later iterations along with optimization of performance, marketing and costs.What is a architectural research? How can research synthesize the wide range of possibilities for the trajectory of architecture when engaged in digital and computational techniques? The goals, techniques, documentation and other methods of research production have a place in architecture that must be explored, particularly as it related to computation. As in other fields, we must build a legitimate body of research whereby others can use and expand upon, such that digital architectures evolve in innovative as well as prosperous paths.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2007_010
id	ecaade2007_010
authors	Artopoulos, Giorgos; Kourtis, Lampros
year	2007
title	The House of Affects Project
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 777-784
doi	https://doi.org/10.52842/conf.ecaade.2007.777
summary	The House of Affects is an experimental installation to be part of the PerFormaSpace project pursued at the University of Cambridge, UK (DIGIS) and Goldsmiths College London, U.C.L. (Digital Studios), currently partially funded by Arts&Business East 2006, in collaboration with Econavate, UK who will provide their technical expertise in fabrication using recycled materials. This paper presents project-specific information and theoretical discussion on the design process and the computational methods used to develop advanced adaptive structural components in relationship to behavioral goals, criteria and constraints.
keywords	Optimization, computational architecture, architectonics, adaptability
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2006_paper6
id	ascaad2006_paper6
authors	Biloria, Nimish; Kas Oosterhus, and Cas Aalbers
year	2006
title	Design Informatics: a case based investigation into parametric design scripting and CNC based manufacturing techniques
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for manifesting complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This designresearch approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. A pattern of points attained from this intersection: ‘the point cloud’ serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed scriptroutines, iteratively run calculations to generate steel-wire frames, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct thus enabling timely and effective construction of the conceptualized form.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddss2006-pb-51
id	DDSS2006-PB-51
authors	Dino Borri, Giovanni Circella, Michele Ottomanelli, and Domenico Sassanelli
year	2006
title	Optimization of Choice Modelling in Complex Urban Contexts - Applications in planning for sustainable development
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 51-66
summary	This paper focuses on the capabilities of choice models in assisting planners in the development of transport policies and interventions for strategic transport planning for urban systems. Models are looked at as part of a decision support system for the development of transport measures for sustainable mobility. The use of participation is looked at as a tool for the understanding of the real needs in terms of mobility in the complex contemporary society and for the construction of the future transport scenarios and transport alternatives.
keywords	Choice modelling, Behavioural models, Uncertainty, Sustainable development
series	DDSS
last changed	2006/08/29 12:55

_id	2006_778
id	2006_778
authors	Dritsas, Stylianos; Renos Charitou and Lars Hesselgren
year	2006
title	Computational Methods on Tall Buildings - The Bishopsgate Tower
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 778-785
doi	https://doi.org/10.52842/conf.ecaade.2006.778
summary	This paper summarizes the ongoing research done on The Bishopsgate Tower in the City of London using parametric design methodologies. The process is indicative of how computational methods will develop in the future and help designers find solutions for increasingly complex spaces.
keywords	Tall Buildings; Computational Geometry; Building Information Management; Façade Optimization
series	eCAADe
email
last changed	2022/06/07 07:55

_id	a126
id	a126
authors	Finucane E, Derix C and Coates P
year	2006
title	Evolving Urban Structures using Computational Optimisation
source	Proceedings of the Generative Arts conference, Milan, 2006
summary	This paper investigates the use of computer analogies for naturally inspired optimisation techniques as an aid to developing the site layout and massing for the new World Trade Centre development in Pristina Kosovo, which is being designed and developed by 4M Group architectural company, in conjunction with the Advanced Modelling Group Aedas. The development of a genetic algorithm will incorporate various techniques, that have been developed in the field of multi-objective optimisation, to create three dimensional massing models, and site layout solutions which partially fulfil the Prisina brief requirements, which are taken from specifications created by 4M Group. Genetic algorithms are based on natural evolutionary principles which are explained in this paper. It will incorporate Pareto concepts to manage the optimisation of the various objective functions. For example, these will include volume and position of units, which will ensure that the different and sometime conflicting needs of the site are balanced throughout the optimisation. This type of problem is often known as an NP-complete (non-determinate polynomial time) problem. This will provide architects and planners with a number of Pareto optimised site massing solutions as an aid to the design process. An initial investigation into the specifics of the Pristina site requirements, will be followed by an investigation into the the genetic algorithm which is created in Visual Basic for Applications (VBA) linked with AutoCAD as the graphical output of the code. The embryology (development) of the various solutions from the genetic information incorporates an ‘ant’ pheromone trail model, which simulates the action of ants during food foraging, as a tool for initial route planning within the site. Diffusion and cellular automata are used during the development of the solution to construct the massing for the site.
keywords	urban planning, evolutionary algorithms, pareto optimization, Lindenmayer systems, ant-colony optimization, cellular automaton
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:33

_id	ddss2006-hb-309
id	DDSS2006-HB-309
authors	John S. Gero and Udo Kannengiesser
year	2006
title	A Framework for Situated Design Optimization
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 309-324
summary	This paper presents a framework for situated design optimization that expands the traditional view of design optimization. It is based on the notion of interaction providing the potential for modifications of various aspects of the optimization process: problem formulation, the optimization tool, the designer and ultimately the result. In contrast to other approaches, these modifications can drive further interactions within the same optimization process. We use parts of the situated function-behaviour-structure (FBS) framework as an ontological basis to describe the effects of intertwined interactions and modifications on the state space of ongoing optimization processes.
keywords	Design optimization, Situatedness
series	DDSS
last changed	2006/08/29 12:55

_id	caadria2006_179
id	caadria2006_179
authors	KEATRUANGKAMALA K., NILKAEW P.
year	2006
title	STRONG VALID INEQUALITY CONSTRAINTS FOR ARCHITECTURAL LAYOUT DESIGN OPTIMIZATION
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 179-185
doi	https://doi.org/10.52842/conf.caadria.2006.x.w5d
summary	In the past decades, many attempts have been made to solve the challenging architectural layout design problem such as non-linear programming and evolutionary algorithm (Michalek and Papalambros, 2002). The Mixed Integer Programming (MIP) (Kamol and Krung, 2005) was recently developed to find the global optimal solution. However, the problem can be shown to belong to the class of NP-hard problem (Michalek and Papalambros, 2002). Hence, only the small instances of the problem can be solved in a reasonable time. In order to deal with large problem sizes, this paper utilizes the strong valid inequalities (George and Laurence). It cut off the infeasible points in the integral search space by formulated the disconnected constraints involved with line configurations of three rooms. It is shown to significantly increase the computational speed to more than thirty percents. This exhibits the practical use of the MIP formulation to solve the medium size architectural layout design problems.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	fcb4
id	fcb4
authors	Loemker, Thorsten Michael
year	2006
title	Solving Revitalization-Problems by the Use of a Constraint Programming Language
source	IKM 2006, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering, Weimar, July 2006
summary	This research focuses on an approach to describe principles in architectural layout planning within the domain of revitalization. With the aid of mathematical rules, which are executed by a computer, solutions to design problems are generated. Provided that “design” is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a problem, an exemplary method will be described to solve such problems in architectural layout planning. To avoid conflicts relating to theoretical subtleness, a customary approach adopted from Operations Research has been chosen in this work [1]. In this approach, design is a synonym for planning, which could be described as a systematic and methodical course of action for the analysis and solution of current or future problems. The planning task is defined as an analysis of a problem with the aim to prepare optimal decisions by the use of mathematical methods. The decision problem of a planning task is represented by an optimization model and the application of an efficient algorithm in order to aid finding one or more solutions to the problem. The basic principle underlying the approach presented herein is the understanding of design in terms of searching for solutions that fulfill specific criteria. This search is executed by the use of a constraint programming language.
keywords	Revitalization, Optimization, Constraint Programming, OPL
series	other
type	short paper
email
more	http://euklid.bauing.uni-weimar.de/ikm2006-cd/data/templates/papers/f26.pdf
last changed	2008/10/13 14:02

_id	ascaad2006_paper7
id	ascaad2006_paper7
authors	Lömker, Thorsten M.
year	2006
title	Designing with Machines: solving architectural layout planning problems by the use of a constraint programming language and scheduling algorithms
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	In 1845 Edgar Allan Poe wrote the poem “The Raven”, an act full of poetry, love, passion, mourning, melancholia and death. In his essay “The Theory of Composition” which was published in 1846 Poe proved that the poem is based on an accurate mathematical description. Not only in literature are structures present that are based on mathematics. In the work of famous musicians, artists or architects like Bach, Escher or Palladio it is evident that the beauty and clarity of their work as well as its traceability has often been reached through the use of intrinsic mathematic coherences. If suchlike structures could be described within architecture, their mathematical abstraction could supplement “The Theory of Composition” of a building. This research focuses on an approach to describe principles in architectural layout planning in the form of mathematical rules that will be executed by the use of a computer. Provided that “design” is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a design problem, an exemplary method will be described to solve problems in architectural layout planning. Two problem domains will be examined: the design of new buildings, as well as the revitalization of existing buildings. Mathematical and syntactical difficulties that arise from the attempt to extract rules that relate to the process of building design will be pointed out. To avoid conflicts relating to theoretical subtleness a customary approach has been chosen in this work which is adopted from Operations Research. In this approach design is a synonym for planning, which could be described as a systematic and methodical course of action for the analysis and solution of current or future problems. The planning task is defined as an analysis of a problem with the aim to prepare optimal decisions by the use of mathematical methods. The decision problem of a planning task is represented by an optimization model and the application of an efficient algorithm to aid finding one or more solutions to the problem. The basic principle underlying the approach presented herein is the understanding of design in terms of searching for solutions that fulfill specific criteria. This search will be executed by the use of a constraint programming language, which refers to mathematical as well as to integer and mixed integer programming. Examples of architectural layout problems will be presented that can be solved by the use of this programming paradigm. In addition to this, a second programming approach resulting from the domain of resource-allocation has been followed in this research. It will be demonstrated that it is as well possible, to aid architectural layout planning by the use of scheduling algorithms.
series	ASCAAD
email
last changed	2007/11/27 08:22

_id	2006_804
id	2006_804
authors	Lömker, Thorsten M.
year	2006
title	Non-Destructive Floor Space Relocation with the Aid of a Constraint Programming Language
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 804-807
doi	https://doi.org/10.52842/conf.ecaade.2006.804
summary	This research focuses on an approach to describe principles in non-destructive floor space relocation within the domain of revitalization. With the aid of mathematical rules, which are executed by the use of a computer, solutions to floor space relocation problems are generated. Provided that “design” is in principle a combinatorial problem, i.e., a constraint-based search for an overall optimal solution, an exemplary method is described to solve such problems.
keywords	Revitalization; Optimization; Constraint Programming; OPL
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2006_237
id	caadria2006_237
authors	N.BILORIA, K.OOSTERHUIS, C. AALBERS
year	2006
title	DESIGN INFORMATICS: (A case based investigation into parametric design, scripting and CNC based manufacturing techniques)
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 237-244
doi	https://doi.org/10.52842/conf.caadria.2006.x.q9e
summary	The research paper exemplifies a novel information integrated design technique developed at ONL (Oosterhuis and Lenard), Netherlands, specifically appropriated for envisaging complex geometric forms. The ‘informed design technique’, apart from being highly instrumental in conceptualizing and generating the geometric component constituting architectural form in a parametric manner, is also efficiently utilized for precise computer aided manufacturing and construction of the speculated form. Geometric complexities inherent in contemporary architectural constructs and the time spent in appropriation of such topologies, fueled the ‘informed design’ approach, which caters to issues of timely construction, precision oriented design and production (visual and material) and parametric modeling attuned to budgetary fluctuations. This design-research approach has been tested and deployed by ONL, for conceiving ‘the Acoustic Barrier’ project, Utrecht Leidsche Rijn in the Netherlands and is treated as a generic case for exemplifying the ‘informed design’ technique in this research paper. The design methodology encourages visualizing architectural substantiations from a systems perspective and envisages upon a rule based adaptive systems approach involving extrapolation of contextual dynamics/ground data in terms of logical ‘rules’. These rules/conditionalities form the basis for spawning parametric logistics to be mapped upon geometric counterparts exemplifying the conception. The simulated parametric relations bind dimensional aspects (length, width, height etc.) of the geometric construct in a relational manner, eventually culminating in a 3D spatial envelope. This evolved envelope is subsequently intersected with a ‘parametric spatio-constructive grid’, creating specific intersecting points between the two. The hence extorted ‘point cloud’ configuration serves as a generic information field concerning highly specific coordinates, parameters and values for each individual point/constructive node it embodies. The relations between these points are directly linked with precise displacements of structural profiles and related scaling factors of cladding materials. Parallel to this object oriented modeling approach, a detailed database (soft/information component) is also maintained to administer the relations between the obtained points. To be able to derive constructible structural and cladding components from the point cloud configuration customized Scripts (combination of Lisp and Max scripts) process the point cloud database. The programmed script-routines, iteratively run calculations to generate steel-wire frames, steel lattice-structure and cladding panels along with their dimensions and execution drawing data. Optimization-routines are also programmed to make rectifications and small adjustments in the calculated data. This precise information is further communicated with CNC milling machines to manifest complex sectional profiles formulating the construct hence enabling timely and effective construction of the conceptualized form.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	sigradi2006_e151c
id	sigradi2006_e151c
authors	Neumann, Oliver and Schmidt, Daniel
year	2006
title	CNC Timber Framing – Innovative Applications of Digital Wood Fabrication Technology
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 304-307
summary	The discourse on depleting natural resources and compromised environments have led to extended research on sustainable designs methods, building practices and materials. Beyond the actual performance of building products and components, research on sustainable building increasingly focuses on the long-term effects of the production, application and life cycle of building materials on the natural environment, human inhabitation and quality of life. Computer aided manufacturing technologies play a significant role not only in the transformation of design and building methods, but also in an extended discourse on cultural development. Globally available technologies connect the design and building process to a broad range of long-term ecological factors by creating a correlation between "the emergent political, economical and social processes and … architectural techniques, geometries and organization." Through this interrelationship to economy and culture, technology and its applications are also directly related to notions of place and territory as well as to fundamental ideas of ecology. The collaborative research and design study for an outdoor theater roof structure at the University of British Columbia Malcolm Knapp Research Forest at Maple Ridge, B.C., Canada, focuses on the use of digital media in prefabrication and material optimization. By utilizing small square section timber and minimizing the use of alienating connectors the research on the wood roof structure illustrates the potential of a design culture that seeks innovation in a broader understanding of ecology routed in regional culture, environmental conditions, economy and tradition. Labor intensive manufacturing techniques are redefined aided by computer controlled machines and virtual modeling of complex geometries is translated into simple operations. The result is a more sensible and accurate response to the place’s demands. In order to generate innovative design interventions that make a constructive long-term contribution to the preservation, maintenance and evolution of the environment, design needs to be based on a comprehensive understanding of its context and the distinctive qualities of the materials used. Following the example of the outdoor roof structure, this paper aims to define innovative design as work that resonates at the intersection of the fields of technology, material science, manufacturing processes, techniques of assembly and context that constitute the expanded context or complex ecology that projects need to engage. It is in design research studies like for the outdoor theater roof structure with focus on CNC wood fabrication technologies that the common design and building discourse is put to question, boundaries are explored and expanded and the collective understanding is improved towards ecological design.
keywords	CNC Wood Fabrication; Design Innovation; Ecology
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	ecaade2007_068
id	ecaade2007_068
authors	Schindler, Christoph; Châtelet, Maud; Wiskemann, Barbara; Zieta, Oskar
year	2007
title	Umbrella Schoolyard Roofs in Zurich
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 35-42
doi	https://doi.org/10.52842/conf.ecaade.2007.035
summary	The paper discusses a 1:1 student workshop on digital sheet metal fabrication organized in collaboration between ETH Zurich and the City of Zurich in 2005 and 2006. During the workshop a structure of fifteen sheet metal schoolyard roofs was designed, produced, and constructed by the participating students. The workshop was set up to explore how current academic topics such as CAD/CAM, digital fabrication with minimal tolerance, and design optimization with genetic algorithms could be incorporated in a permanent structure with legal building standards and a professional construction sequence.
keywords	Teaching seminar workshop 1:1, digital sheet metal fabrication, pavilion roof structure, genetic algorithms
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac20064105
id	ijac20064105
authors	Sowa, Agnieszka Katarzyna
year	2006
title	Towards architect-aided computing design
source	International Journal of Architectural Computing vol. 4 - no. 1, 69-85
summary	In the design process of some recent, specific architectural projects the part elaborated by computers and machines significantly grows. They could generate, optimize and produce the most complicated and complex solutions, taking over some tasks which before were the domain of architects. This article presents a project carried out by postgraduate students at Eidgenossische Technische Hochschule in Zurich, Switzerland, where such a digital design process was implemented, with all its advantages and disadvantages. The observations and conclusions gained during the work allow the author to formulate the concept of Architect-Aided Computing Design, to define some challenges for architects created by such a working method, and to present an analysis about the potential new software for architectural production.
keywords	Structural Optimization; Rapid Prototyping; CNC Production; CAAD Education
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00006
last changed	2007/03/04 07:08

_id	sigradi2006_000
id	sigradi2006_000
authors	Soza, Pedro (ed.)
year	2006
title	SiGradi2006
source	Proceedings of the 10th Iberoamerican Congress of Digital Graphics Graphics / ISBN 956-19-0539-6] Santiago de Chile (Chile) 21-23 november 2006, 494 p.
summary	Forty years of development have passed since digital technologies were used in the service of design for the first time but many of the early questions about its usefulness are still open. The beginning [early] period, known as call “analytical”, was founded in a rational and reductionist understanding of the phenomenon, including those related to creative processes. The target was rational optimization for possible solutions around a given problem. Later on, the graphic technologies development meant a huge jump in issues concerning 3D representation of designed objects. A great interest in visualization and “the virtual” then arose: almost everything and any shape, could be modelled and visualized, obtaining representations of space, time, light and matter as never seen before in any field related to imaging. Today these useful technologies are amplified due to the connectivity of the web, stimulating the birth of applications and models which seek to optimize the production processes. However, before of its impact, there is still a question waiting to be answered since the first days of CAD: has all this technology actually allowed the development of better design? The answer doesn’t seem to be obvious, when above all we see ourselves facing the context of a global world that becomes more and more complex. Digital technology is developing very rapidly. Despite this, an equally accelerated improvement in design products is not so clear. The reason for this could be the fact that our practices as designers have not been updated and improved at the same speed as technology. This next Sigradi is about debating how our organizational practices are changing with the digital phenomenon and how the users can positively trigger the potential that lies in these technologies. The hypothesis that underpins this question is the consideration that digital technologies are a unique platform to achieve the necessary integration of knowledge that must feed any contemporary design process. We think that the integration of multidisciplinary knowledge, memories, values and imagination must become the starting point in the production of better design.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	ddss2006-hb-293
id	DDSS2006-HB-293
authors	Wei Peng and John S. Gero
year	2006
title	Concept Formation in a Design Optimization Tool
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 293-308
summary	This paper presents how a situated agent model can wrap around a design optimization tool and construct concepts from interaction between the agent, the design problem and the use of the tool. The agent develops its structure and behaviour specific to what it is confronted with - its experience. As a consequence, designers can integrate their expertise with the learning results from the agent to develop design solutions. We present preliminary results.
keywords	Situated agent, Concept formation, Knowledge, Design optimization tool, Design & decision support systems
series	DDSS
last changed	2006/08/29 12:55

No more hits.