Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 26

Reformat results as: short short into frame detailed detailed into frame

_id	acadia06_455
id	acadia06_455
authors	Ambach, Barbara
year	2006
title	Eve’s Four Faces interactive surface configurations
doi	https://doi.org/10.52842/conf.acadia.2006.455
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 455-460
summary	Eve’s Four Faces consists of a series of digitally animated and interactive surfaces. Their content and structure are derived from a collection of sources outside the conventional boundaries of architectural research, namely psychology and the broader spectrum of arts and culture.The investigation stems from a psychological study documenting the attributes and social relationships of four distinct personality prototypes: the Individuated, the Traditional, the Conflicted, and the Assured (York and John 1992). For the purposes of this investigation, all four prototypes are assumed to be inherent, to certain degrees, in each individual. However, the propensity towards one of the prototypes forms the basis for each individual’s “personality structure.” The attributes, social implications and prospects for habitation have been translated into animations and surfaces operating within A House for Eve’s Four Faces. The presentation illustrates the potential for constructed surfaces to be configured and transformed interactively, responding to the needs and qualities associated with each prototype. The intention is to study the effects of each configuration and how each configuration may be therapeutic in supporting, challenging or altering one’s personality as it oscillates and shifts through the four prototypical conditions.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2006_040
id	2006_040
authors	Ambach, Barbara
year	2006
title	Eve’s Four Faces-Interactive surface configurations
doi	https://doi.org/10.52842/conf.ecaade.2006.040
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 40-44
summary	Eve’s Four Faces consists of a series of digitally animated and interactive surfaces. Their content and structure are derived from a collection of sources outside the conventional boundaries of architectural research, namely psychology and the broader spectrum of arts and culture. The investigation stems from a psychological study documenting the attributes and social relationships of four distinct personality prototypes; the “Individuated”, the “Traditional”, the “Conflicted” and the “Assured”. (York and John, 1992) For the purposes of this investigation, all four prototypes are assumed to be inherent, to certain degrees, in each individual; however, the propensity towards one of the prototypes forms the basis for each individual’s “personality structure”. The attributes, social implications and prospects for habitation have been translated into animations and surfaces operating within A House for Eve’s Four Faces. The presentation illustrates the potential for constructed surfaces to be configured and transformed interactively, responding to the needs and qualities associated with each prototype. The intention is to study the effects of each configuration and how it may be therapeutic in supporting, challenging or altering one’s personality as it oscillates and shifts through the four prototypical conditions.
keywords	interaction; digital; environments; psychology; prototypes
series	eCAADe
type	normal paper
last changed	2022/06/07 07:54

_id	ecaade2007_010
id	ecaade2007_010
authors	Artopoulos, Giorgos; Kourtis, Lampros
year	2007
title	The House of Affects Project
doi	https://doi.org/10.52842/conf.ecaade.2007.777
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 777-784
summary	The House of Affects is an experimental installation to be part of the PerFormaSpace project pursued at the University of Cambridge, UK (DIGIS) and Goldsmiths College London, U.C.L. (Digital Studios), currently partially funded by Arts&Business East 2006, in collaboration with Econavate, UK who will provide their technical expertise in fabrication using recycled materials. This paper presents project-specific information and theoretical discussion on the design process and the computational methods used to develop advanced adaptive structural components in relationship to behavioral goals, criteria and constraints.
keywords	Optimization, computational architecture, architectonics, adaptability
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia06_104
id	acadia06_104
authors	Barrow, Larry R.
year	2006
title	Performance House: A CADCAM Modular House System
doi	https://doi.org/10.52842/conf.acadia.2006.104
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 104-121
summary	Millions of persons around the globe live in low quality indigenous, or Manufactured Housing (MH) systems that often result in low “performance” undesirable living environments and, at times, life threatening habitation. Our research has explored mass production principles in product design and architecture, currently at the single family housing scale, with a focus on the recent devastation along the US Gulf Coast as a result of hurricane impact, most notably hurricane Katrina.“Modern architecture” theoreticians have conceived, written, prototyped and even launched business ventures in an attempt to bring their manufactured housing “ideas” to fruition. However, architects have generally had little “long-term” impact in the area of manufactured housing strategies and the current manufactured housing industry remains archaic and problematic. This paper includes our research of other architects attempts to leverage technology in the manufactured housing industry; additionally, we analyzed current problems in the US mass housing industry. We then derived a set of “design criterion” as a means of anchoring our design inquiry for a proposed factory-built modular house system.Our research encompasses both process and product innovation; this paper reflects on our use of technology to leverage an Industrial Design (ID) process that is inclusive of many “design” partners and team members. We are using both virtual and physical output representation and physical prototyping for a factory-built house system; our Research and Development (R&D) is on-going with our collaborating design-manufacture engineering partners from the automotive, furniture and aerospace research labs here at Mississippi State University. Our goal is to use “industrial design” principles to produce mass housing components that provide durable-sustainable housing.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2006_138
id	2006_138
authors	Chiu, Mao-Lin and Binsu Chiang
year	2006
title	Communicating with Space and People - Smart Interface Design for Enhancing User Awareness and Interactions
doi	https://doi.org/10.52842/conf.ecaade.2006.138
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 138-145
summary	Smart space design has become an important research paradigm because of the emerging information and communication technology, smart materials, and sensory technology. A space equipped with human-computer interfaces, communicates not only with space but also with its occupants. In previous researches, the focus was on developing smart houses which made decisions for its occupants on controlling the condition of space. However, the human tends to make choices and the subtle psychological changes of occupants may derive exceptional decisions. Therefore, this paper is aimed to propose smart interfaces in house design, i.e., the “Individual Sense” concept is introduced by examining the assumptions and cases. This research probed into how the interface is characterized by individual actions. The “Individual Sense” is implemented on the basis of commonsense for reasoning potential interactions and demonstration and discussion are reported.
keywords	Smart space; human computer interaction; interface design; house sense; commonsense
series	eCAADe
email
last changed	2022/06/07 07:56

_id	2006_860
id	2006_860
authors	Duarte, José P. and João Rocha
year	2006
title	A Grammar for the Patio Houses of the Medina of Marrakech - Towards a Tool for Housing Design in Islamic Contexts
doi	https://doi.org/10.52842/conf.ecaade.2006.860
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 860-866
summary	The goal of the research described in this paper is to develop a computational model of the Medina of Marrakech in Morocco. The ultimate goal is to develop a system that could capture some of the characteristics of traditional Muslim cities fabric and use it in contemporary urban planning. Previous papers have proposed the use of three grammars to encode the spatial complexity of the Medina: the urban grammar, the negotiation grammar, and the housing grammar, and addressed the development of the urban grammar. This paper proposes a grammar to describe the formal structure of the houses, the first step in the developments of the remaining two grammars. It describes the set of rules and then illustrates its application in the generation of an existing house. The basic formal structure consists of three concentric rectangular rings with the patio in the middle. The location of the entrance and the staircase are fundamental for the definition of the basic layout.
keywords	Shape grammars; housing design; Islamic architecture
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2006_506
id	2006_506
authors	Fioravanti, Antonio and Rinaldo Rustico
year	2006
title	x-House game - A Space for simulating a Collaborative Working Environment in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2006.506
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 506-511
summary	The research consists of the set up of a game simulating a e Collaborative Working Environment – CWE – in Architectural Design. The use of a game is particularly useful as it makes it possible to simplify the complex terms of the problem and, through the game itself, makes it easier to study knowledge engineering tools, communication protocols and the areas of an ICT implementation of a general model of collaborative design. In the following several characteristics of the game are given (also with reference to other games) such as; participating actors (Wix 1997), the “pieces” (construction components) used, the modular space employed, the PDWs/SDW dialectics, the screenshot of the interface prototype, the score.
keywords	Architectural Design; CWE; Game; Representation Model; KBs
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia06_426
id	acadia06_426
authors	Garber, R., Robertson, N.
year	2006
title	The Pleated Cape: From the Mass-Standardization of Levittown to Mass Customization Today
doi	https://doi.org/10.52842/conf.acadia.2006.426
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 426-439
summary	In the 1950’s, the Levitts put mass-production and the reverse assembly line into use in the building of thousands of single-family houses. However, the lack of variation that made their construction process so successful ultimately produced a mundane suburban landscape of sameness. While there were many attempts to differentiate these Levitt Cape Cods, none matched the ingenuity of their original construction process. The notion of mass-customization has been heavily theorized since the 1990’s, first appearing in the field of management and ultimately finding its way into the field of architecture. Greg Lynn used mass-customization in his design for the Embryological House in which thousands of unique houses could be generated using biological rules of differentiation (Lynn 1999). Other industries have embraced the premise that computer-numerically-controlled technologies allow for the production of variation, though it has not been thoroughly studied in architecture. While digital fabrication has been integral in the realization of several high-profile projects, the notion of large-scale mass-customization in the spec-housing market has yet to become a reality. Through the execution of an addition to a Cape Cod-style house, we examine the intersection between prefabricated standardized panels and digital fabrication to produce a mass-customized approach to housing design. Through illustrations and a detailed description of our design process, we will show how digital fabrication technologies allow for customization of mass produced products.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	be0c
id	be0c
authors	Hamza N, Horne M
year	2007
title	An operational model for teaching low energy architecture
source	Building and Environment Volume 42, Issue 11, November 2007, Pages 3841-3847 July 2007
summary	Awareness of the need to integrate sustainability at all levels has recently been gaining momentum in education to meet pedagogical university policy, government and employers’ expectations. Within the school of the Built Environment at Northumbria University an integrated course delivery has been adopted for second year students. This proposal intends to disseminate an operational model for integrating teaching and assessment between three modules which have traditionally been taught and assessed separately to achieve a low-energy house.
keywords	low-energy architecture, virtual reality, integrated curriculum, project decision making, mapping learning outcomes
series	other
type	normal paper
email
more	http://dx.doi.org/10.1016/j.buildenv.2006.11.003
last changed	2008/03/14 00:25

_id	sigradi2006_e081d
id	sigradi2006_e081d
authors	Hecker, Douglas
year	2006
title	Dry-In House: A Mass Customized Affordable House for New Orleans
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 359-362
summary	Dry-in house is a mass customized affordable housing system proposed for the reconstruction of New Orleans. The dry-in House gets the owner back to their home site quickly while providing the infrastructure an occupant needs (shelter, water, electricity). The owner is supplied with an inhabitable shell that is customizable before it is fabricated as well as onsite as the project is “fitted out” over time. The key concept is to allow families to participate in the design of their customized homes and to get people back to their home sites as quickly as possible and to give them the opportunity to finish and further customize their home over time. The project addresses inefficiencies and redundancies in emergency housing currently provided by FEMA. Primarily the dry-in House as its name implies provides a timely dried-in space which doubles as a customized infrastructure for the reconstruction of homes and neighborhoods. The project is designed to meet the $59,000 life cycle cost of the presently provided temporary housing, the notorious “FEMA Trailer”. However, the Dry-in House provides a solution that: a) Is permanent rather than temporary. The house will be finished and further customized over time rather than disposed of. b) Reoccupies the owner’s home site rather than a “FEMA ghetto” keeping the community together and functioning. c) Is mass customized rather than mass-standardized allowing the owner to have input on the design of their home. The design is a “starter home” rather than an inflexible and over-determined solution. This also has the benefit of giving variation to the reconstruction of New Orleans as opposed to the monotony of mass-production. d) Allows the owners to further customize their home over time with additional exterior finishes and the subdivision and fit out of the interior. By utilizing plate truss technology and associated parametric modeling software, highly customized trusses can be engineered and fabricated at no additional cost as compared to off-the-shelf trusses. This mass customization technology is employed to create the building section of each individual’s house. The truss is not used in its typical manner, spanning over the house; rather, it is extruded in section to form the house itself (roof, wall, and floor). Dry-in House exploits this building technology to quickly rebuild communities in a sensible manner. It allows for an increased speed of design and construction and most importantly it involves the owner in this process. The process has other benefits like reducing waste not only because it replaces the FEMA trailer which is expensive and disposable but also since the components are prefabricated there is more precision and also quality. The Dry-in House allows the owner-designer to “draw” the section of their new home providing them with a unique design and a sense of belonging and security. The design of the section of the house also provides them with spatial configurations customized relative to site conditions, program etc... Because of the narrow lot configuration of New Orleans, the design maximizes the roof as a source for natural ventilation and light for the interior of the house. In addition, the house is one room deep providing cross ventilation in all rooms minimizing reliance on artificial mechanical systems. The timely and efficient off site fabrication of building sections facilitate larger concentrations of volunteers on site at one time, thereby promoting a greater collective spirit among the community and volunteer workforce, a therapeutic event for the community as they participate in the rebuilding of their homes and city. With individualized building sections arriving on site, the construction process is imagined to be more akin to a barn raising, making possible the drying in of multiple houses in less than one day.
keywords	mass customization; digital manufacturing; affordable housing
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2006_c067d
id	sigradi2006_c067d
authors	Hernández Ibáñez, Luis; Juan D. Blanco; José A. Iglesias; Javier Taibo; Antonio Seoane; Alberto Jaspe and Rocío López
year	2006
title	El Museo Vacío. Uso de una instalación transitable de Realidad Virtual para la experimentación espacial de una unidad habitacional en un asentamiento prerromano. [“The Empty Museum” - Use of an immersive VR room to experience the space inside a pre-Roman housing unit]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 363-367
summary	This paper describes the use of a existing Virtual Reality installation developed by the authors named the Empty Museum that allows the users to walk physically into a virtual space. It is used in this case to explore a bronze age housing unit actually being excavated in the settlement of San Cibran de Las (Spain). The project involved a recreation of the architecture, domestic objects and characters related to the ancient Castro culture following an archaeological and historical point of view. The visitor explores the place by walking inside the kitchen of the house, examining several points of interest while triggering explanatory speeches related to what is displayed. The user can also watch the living in the settlement looking through the openings of the virtual building and interact with the virtual inhabitants of the house as he or she physically walks around them.
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	2006_298
id	2006_298
authors	Ireland, Tim
year	2006
title	Form follows function: Activity defines function, gesticulates space
doi	https://doi.org/10.52842/conf.ecaade.2006.298
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 298-301
summary	The foremost principle of this work is that the base level of architectonic form is spatial, and that the array of activities relative to the practice of habitation and their associational parameters to each other determine spatial boundaries, which might be uncovered, to define form. The array of activities, which define a particular ‘mode’ of habitation, will vary according to particular functions therefore defining building types. This might also be extended to the individual, in the case of an apartment or house in that the personal activities of an individual might be utilized to define custom form. Therefore defining a place of habitation, which reflects the individual qualities of that individual and responds to their personal mode of living, character and spatial requirements. Computationally I suppose space defined through an array of activities represented in 3D, and that the topology of activities defined geometrically through the application of an array of self-organizing activity maps for the morphology of space, to define form, relative to user/activity associations and context.
keywords	Emergence; SOM’s; Activities; Space
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia06_556
id	acadia06_556
authors	Johnson, J., Gattegno, N.
year	2006
title	Future Cities Lab \| Energy Farm: Seoul Opera House
doi	https://doi.org/10.52842/conf.acadia.2006.556
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 556-559
summary	The patterning ranges are developed by merging images of the river surface with tonal ranges that pair with the desired transparency of the metal surface. Water surface images were chosen for the non-uniform distribution of tone. Light tonal areas create small punches, while dark tonal areas create larger punches. The water composite image is rasterized in a half-tone patterning and converted to fabrication data with RhinoScripts for CNC production.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	caadria2006_313
id	caadria2006_313
authors	MAO-LIN CHIU, BINSU CHIANG, GUAN-CHENG LEE, HANYUN TSENG
year	2006
title	HOUSE SENSE: Designing smart houses with intelligent interface design
doi	https://doi.org/10.52842/conf.caadria.2006.x.s1v
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 313-322
summary	The research and development of smart houses are emergent because of the information and communication technological development and the search for better living quality from occupants. This paper therefore explores how smart technologies are applied into smart houses within the living context. Through a pilot study of cases and technological innovations to address the new living context by technology-interface-design strategies, a development framework of smart house is formed by three major elements, i.e. smart materials, technologies, and design. In order to actualize house senses, the prototype for smart houses is evolved. When space and wireless smart components are integrated, the living environment becomes more flexible and adaptable to accommodate or support activities digitally, and users can interact with space via context aware computing for acquiring and assimilating information in order to enhance their living experience.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2006_209
id	caadria2006_209
authors	MARCEL BOTHA, LAWRENCE D. SASS
year	2006
title	THE INSTANT HOUSE: Design and digital fabrication of housing for developing environments
doi	https://doi.org/10.52842/conf.caadria.2006.x.q2j
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 209-216
summary	Through a novel method, it is possible to provide mass customized, designed housing to emergency and poverty stricken locations. A definitive need exists for a system that is rapidly deployable and scalable while fostering individuality within the larger rebuilt community. This paper describes the relationship of digital fabrication to materials and design rules by example. The paper ends with different iterations of the Instant house and an explanation of its construction method and execution.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	2006_582
id	2006_582
authors	Nagakura, Takehiko and Panagiotis Chatzitsakyris
year	2006
title	Man with the Movie Camera - An Approach to Synthetic Cinematography for Built Environment
doi	https://doi.org/10.52842/conf.ecaade.2006.582
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 582-589
summary	This paper discusses shortcomings of current animation software, and introduces a new type of digital tool that helps an architect quickly construct a cinematic spatial representation. The novel approach is that this tool looks at architectural space as a condition populated with mobile human inhabitants, takes advantage of cinematic conventions a trained film-maker would deploy and automates the process of camera work and montage. A prototype implementation demonstrates its application to a small house designed by Le Corbusier.
keywords	Animation; Digital Cinematography; Architectural Visualization; Citrohan House
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ddss2006-pb-185
id	DDSS2006-PB-185
authors	O.T.J. Devisch, H.J.P. Timmermans, T.A. Arentze, and A.W.J. Borgers
year	2006
title	Modelling Residential Search and Location Choice - Framework and Numerical Experiments
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 185-200
summary	People only move a limited number of times during their lifetime. Factors such as high financial costs, local social networks, emotional bounds, etc. make that people typically postpone this decision as long as possible, up to the point where the benefit of alternative housing outperforms all these factors. Then things generally have to go fast. This combination of time-pressure, high costs and lack in experience turn residential search and location choice into a complex decision process. This paper presents a model developed to grasp some of this complexity. Households are approached as autonomous decision-makers continuously evaluating whether to search for information, to visit houses for inspection, to start negotiating with the owner of a house for sale or to do nothing and stay in the current house. Households make these evaluations on the basis of beliefs regarding their environment and update these beliefs each time they collect new information on this environment.
keywords	Microsimulation, Spatial simulation models, Strategic decision-making, State dependent behaviour, Belief-updating
series	DDSS
last changed	2006/08/29 12:55

_id	bsct_paipai
id	bsct_paipai
authors	Paipai, Angeliki
year	2006
title	Computational Assessment of Passive Cooling Methods in Buildings
source	Vienna University of Technology; Building Science & Technology
summary	Various factors have been contributing to a recent steady increase in buildings’ demands for cooling energy: environmental changes, increased heat gains due to equipment and growing expectations in view of acceptable indoor thermal conditions. Given this context, it’s both environmentally and economically meaningful to develop and implement passive cooling techniques toward the reduction of buildings’ demand for cooling energy. In the present study, we use parametric simulations to compute the relative impact of various passive cooling technologies toward the reduction of overheating risk in residential buildings. The cooling measures under examination are shading, natural ventilation (emphasizing on night time natural ventilation), and the application of phase change materials (PCM). The buildings that are being used for the parametric studies are an apartment and a double-storey single house, both simulated for a Mediterranean climate (Athens, Greece) and middle-European one (Vienna, Austria). The results showed that passive cooling methods can significantly contribute the reduction of overheating in buildings. In particular shading and night time ventilation have been shown to be very effective especially if applied in combination. PCMs on the other hand, showed a limited potential in the reduction of overheating risk, at least under the specific climatic circumstances.
keywords	Passive cooling; Parametric modeling; Thermal storage; Night ventilation; Phase Changing materials
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2006/07/02 22:30

_id	ascaad2006_paper1
id	ascaad2006_paper1
authors	Petzold, Frank and Jan Frohburg
year	2006
title	“Not Every new Monday…”: on using computer-games technology in architectural design education
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	The application of new media is common practice in architectural offices and complements traditional forms of presentation such as drawings and physical ‘haptic’ models. Other interactive forms of presentation are also already available, for example in the realm of computer gaming, however the transfer and application of game engines to an architectural environment has not yet been explored in any depth. This paper looks at how “new media” can be used as a means of communicating architectonic information without simply emulating an already available traditional means of representation. We discuss the process of learning how “new media” (the computer as a multi media) can be used as a tool for the analysis and reconstruction of architecture. Using Mies van der Rohe’s unrealised project for a brick country house as a basis, a project was devised which communicates valuable design and analysis skills and also allowed us to explore the use of “new media” and to draw conclusions for teaching and research as well as to critically assess the opportunities, limitations and risks involved.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ijac20064104
id	ijac20064104
authors	Sass, Larry
year	2006
title	A wood frame grammar: A generative system for digital fabrication
source	International Journal of Architectural Computing vol. 4 - no. 1, 51-67
summary	A novel design system is presented that generates information for house construction exclusively from 3/4" plywood sheets. A shape grammar routine is employed to subdivide an initial solid shape into constructible components for desktop digital fabrication and design evaluation as a physical model. Once approved final construction can happen with components cut on a CNC wood router after the design has been validated by a laser cut model. Shape grammar rule format is used to design functions that build geometry later converted to a scripting language in CAD. Future goals for the grammar are to develop a complete CAD program that translates 3D designs to 2D drawings for flat digital fabrication. The ultimate goal of the program is to automate the translation of solid models to information for digital fabrication. Currently a manual process the translation allows the designer to focus on the visual aspects of evaluation at any scale with little concern for constructability.
keywords	CNC; Shape Grammars; Scripting
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00005
last changed	2007/03/04 07:08

For more results click below: