Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	2006_898
id	2006_898
authors	Tsangrassoulis, Aris; Vassilis Geros and Vassilis Bourdakis
year	2006
title	Energy conscious automated design of building façades using genetic algorithms
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 898-902
doi	https://doi.org/10.52842/conf.ecaade.2006.898
summary	Various European Directives have been issued concerning the energy efficiency of the buildings. The target is the achievement of a near optimum energy efficient environment while at the same time satisfying occupant needs throughout the year within an integrated “holistic” or “whole building” framework. A variety of different antagonistic parameters should be balanced such as window size and glazing transmittance or daylighting and shading and in most cases this requires an examination of various scenarios. Thus the design of building envelopes should address a careful balance between internal requirements and loads, the materials and properties of the façade and the external environment. Nowadays, the available tools for façade design-in terms of building’s energy efficiency- are inappropriate for interactive or creative use. In this paper we examine the development of a genetic algorithm which is capable to optimise the opening areas, glazing properties and shading configurations –on the basis of minimum energy consumption- and then to design automatically simplistic alternative scenarios of the building façade.
keywords	Genetic algorithms; building energy efficiency
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ddss2006-pb-253
id	DDSS2006-PB-253
authors	R. Di Giulio, M. Coccagna, and G. Tonelli
year	2006
title	IT Tools for the Valorisation of the Building Heritage - Analysis and reuse of rural buildings to improve cultural-tourism activities
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 253-268
summary	According to the valorisation of sustainable policies, many European countries developed common or individual strategies to preserve and exploit their environmental and building heritage. Through the VILLAS transnational project it has been possible to create a set of specific tools, focused on different user types and needs that are easy to be combined and applied to assess and valorise private and public building heritage.
keywords	Design support tools, Geographical information systems (GIS), Multi-criteria & decision mapping, Networks for decision-making
series	DDSS
last changed	2006/08/29 12:55

_id	sigradi2021_18
id	sigradi2021_18
authors	Verniz, Debora and Duarte, José P
year	2021
title	Assessing Santa Marta: Using Evaluation Tools to Inform Parametric Urban Design
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 749–758
summary	Lack of affordable housing is a worldwide problem. Rapid urbanization, rural exodus, and poor governance policies have contributed to the problem and, in response, low-income populations resort to self-construction. The result are informal settlements located predominantly in marginalized urban areas (United Nations, 2015) that develop with neither urban infrastructure nor compliance with building and planning codes (Lall et al., 2006; Patel et al., 2018; United Nations Human Settlements Programme, 2012) and, consequently, offer a poor-quality built environment. The goal of this paper is to methodologically identify physical aspects of such built environments that could be improved. We evaluate a case study, the Santa Marta favela in Brazil, using a holistic housing-quality assessment tool and local building and planning codes as reference. Our results identify the physical characteristics with lower quality standards in the case study and demonstrate the efficacy of the methodology introduced for this purpose.
keywords	housing quality assessment, building codes, informal settlements, parametric urban design, Santa Marta favela.
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	sigradi2006_e172c
id	sigradi2006_e172c
authors	Donath, Dirk and González Böhme, Luis Felipe
year	2006
title	A Constraint-Based Building Bulk Design Support
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 278-282
summary	We introduce an architecture practice-oriented implementation strategy of constraint-based methods called BDS (Building Bulk Design Support) to supporting bulk analysis during the architectural programming phase. We examine the optmization problem of site coverage and building massing according to a set of standard planning and zoning regulations, and try a problem solving approach based on the paradigm of constraint satisfaction problems. The case study, which is focused on the paticipatory planning of very low-income dwellings within the Latin American context, serves as testbed for a prototypical application of the adopted methodology. The BDS constitutes a novel approach on computer-aided bulk analysis, regarding this particularly relevant context of application. In the case of participatively planned low-income housing projects, efficiency regarding time and cost of planning directly affects dwellers’ quality of life, whereas elementary programming tasks such as bulk analysis lack appropriate state-of-the-art technological support. Traditional architectural planning methods demand a large domain-specific knowledge base and skillful planners. A planning process, which is mainly driven by the formulation of planning-relevant constraints and sets of solution alternatives, suggests to avoid architects’ traditional procedure of: 1. Create an (yet not necessarily valid) instance of the eventual design solution by directly choosing specific values for its shape parameters. 2. Evaluate its validity by confronting the designed model to a set of applicable constraints, which have to be satisfied. Instead, the constraint-based design methodology poses a search procedure that operates in a space of pertinent constraint sets. A computer-aided interactive search procedure to find more valid design solution alternatives in less time and with less effort is particularly qualified to supply efficient support for participatory planning activities carried out between dwellers and planners. The set of solutions for a building-bulk design problem is constrained by both a large complex system of planning and zoning regulations and the geometry of the eventual design solution itself. Given a considerable amount of such regulations, a regular size geometric constraint satisfaction system proved to be capable of providing a highly efficient, interactive modeling and evaluation tool for the formulation in real time of valid solution alternatives for an ordinary building-bulk design problem. A BDS implementation will constitute one system module of a larger integrated system model called Esther. A BDS tool shall interact with other functional modules, like e.g. the FLS (Floor plan Layout Support), which also uses constraint-based design methods.
keywords	constraint-based design; bulk analysis; participatory planning; low-income housing; design theory; design proces
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	eaea2005_199
id	eaea2005_199
authors	Martens, Bob
year	2006
title	Dissemination of knowledge in architectural endoscopy
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 199-206
summary	The first EAEA conference was hosted 1993 in Tampere (Finland) and subsequently a further six conferences have taken place. Future conferences are already pre-scheduled and a steadily rising number of papers has been written. So far, the conference proceedings have been published in a paperbased format and, as these were published in small numbers, it is rather hard to take stock of preceding entries. However, the published proceedings can be regarded as capital for the EAEA-Association and it is both necessary and worthwhile to preserve this collective memory by means of an archived e-collection. At the time of the formation of the EAEA, electronic publishing was not yet widely used. Since then, computerbased infrastructure and related (web-based) software tools have become widely available. There is even an ongoing debate within the associations dedicated to electronic publishing, as to whether conference proceedings should be solely distributed in a digital format. Doubtless, a discussion towards the value of electronic publication output in the framework of research assessments etc. would be a step too far for this paper. Still, a dual strategy for the EAEA could be aiming at the production of a limited number of paperbased copies, which would mainly be distributed to the conference participants (and the remaining part being made available resp. free library copies to make this output more visible). However, the high commercial interest derived by financial revenues is not given and dissemination by digital means is far more in the interest of both the participants and the EAEA-association. Today, the creation of an electronic version of the conference proceedings costs very little extra. In both cases (analogue and digital) the materials should not only be “deposited” on the desktop of individuals, but also be capable of reaching more public destinations. As the conference host is changing biennially, it has to be confirmed that the hosting institution will handle the delivery of metadata. Local printing houses arrange the printing work, and no further interests (concerning copyright, revenues etc) from the side of publishing houses are in charge. The import of the provided metadata is supported by way of self-organisation on a shoestring budget, as it does not require extensive work if properly defined. This means that minimal effort is needed to make the material available and to achieve a certain level of sustainability.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	bsct_paipai
id	bsct_paipai
authors	Paipai, Angeliki
year	2006
title	Computational Assessment of Passive Cooling Methods in Buildings
source	Vienna University of Technology; Building Science & Technology
summary	Various factors have been contributing to a recent steady increase in buildings’ demands for cooling energy: environmental changes, increased heat gains due to equipment and growing expectations in view of acceptable indoor thermal conditions. Given this context, it’s both environmentally and economically meaningful to develop and implement passive cooling techniques toward the reduction of buildings’ demand for cooling energy. In the present study, we use parametric simulations to compute the relative impact of various passive cooling technologies toward the reduction of overheating risk in residential buildings. The cooling measures under examination are shading, natural ventilation (emphasizing on night time natural ventilation), and the application of phase change materials (PCM). The buildings that are being used for the parametric studies are an apartment and a double-storey single house, both simulated for a Mediterranean climate (Athens, Greece) and middle-European one (Vienna, Austria). The results showed that passive cooling methods can significantly contribute the reduction of overheating in buildings. In particular shading and night time ventilation have been shown to be very effective especially if applied in combination. PCMs on the other hand, showed a limited potential in the reduction of overheating risk, at least under the specific climatic circumstances.
keywords	Passive cooling; Parametric modeling; Thermal storage; Night ventilation; Phase Changing materials
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2006/07/02 22:30

_id	ddss2006-pb-51
id	DDSS2006-PB-51
authors	Dino Borri, Giovanni Circella, Michele Ottomanelli, and Domenico Sassanelli
year	2006
title	Optimization of Choice Modelling in Complex Urban Contexts - Applications in planning for sustainable development
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 51-66
summary	This paper focuses on the capabilities of choice models in assisting planners in the development of transport policies and interventions for strategic transport planning for urban systems. Models are looked at as part of a decision support system for the development of transport measures for sustainable mobility. The use of participation is looked at as a tool for the understanding of the real needs in terms of mobility in the complex contemporary society and for the construction of the future transport scenarios and transport alternatives.
keywords	Choice modelling, Behavioural models, Uncertainty, Sustainable development
series	DDSS
last changed	2006/08/29 12:55

_id	ddss2006-pb-169
id	DDSS2006-PB-169
authors	Zhenjiang Shen, Mitsuhiko Kawakami, and Ping Chen
year	2006
title	Study on a Decision Support System for Large-Scale Shopping Centre Location Planning Using a Multi-Agent System
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 169-184
summary	Multi-agent system as a bottom-up approach has been shown powerful in better understanding processes of urban development and growth. Most of them are approaching from economic theory and social behaviours but urban planning. This paper proposes an alternative approach to urban simulation that combines urban planning with agents' behaviour in multi-agent modelling thus to make scenarios analysis more reasonable particularly for decision based on urban land use plan. This paper discusses the approach as a computer simulative solution of a new large-scale shopping centre location for most regional cities in Japan where commercial heart of inner city is facing decline. We postulate that policy decision makers can get better understanding of the policies' impact on inner city commercial environment under different scenarios through computer experimentation.
keywords	Inner city decline, Planning regulations, Planning policy, Agent
series	DDSS
last changed	2006/08/29 12:55

_id	ascaad2006_paper8
id	ascaad2006_paper8
authors	Abdullah, Sajid; Ramesh Marasini and Munir Ahmad
year	2006
title	An Analysis of the Applications of Rapid Prototyping in Architecture
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	Rapid prototyping (RP) techniques are widely used within the design/manufacturing industry and are well established in manufacturing industry. These digital techniques offer quick and accurate prototypes with relatively low cost when we require exact likeness to a particular scale and detail. 3D modeling of buildings on CAD-systems in the AEC sector is now becoming more popular and becoming widely used practice as the higher efficiency of working with computers is being recognized. However the building of scaled physical representations is still performed manually, which generally requires a high amount of time. Complex post-modernist building forms are more faithfully and easily represented in a solid visualization form, than they could be using traditional model making methods. Using RP within the engineering community has given the users the possibility to communicate and visualize designs with greater ease with the clients and capture any error within the CAD design at an early stage of the project or product lifecycle. In this paper, the application of RP in architecture is reviewed and the possibilities of modeling architectural models are explored. A methodology of developing rapid prototypes with 3D CAD models using methods of solid freeform manufacturing in particular Fused Deposition Modeling (FDM) is presented and compared against traditional model making methods. An economical analysis is presented and discussed using a case study and the potential of applying RP techniques to architectural models is discussed.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	acadia06_230
id	acadia06_230
authors	Anzalone, Phillip
year	2006
title	Synthetic Research
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 230-231
doi	https://doi.org/10.52842/conf.acadia.2006.230
summary	Synthetic Research insinuates a relationship of a meticulous process of discovering truth contradicted against a fabricated, as in concocted, reality. It is important to recognize the logical aspect of synthetic when examining what synthetic research can provide for architectural discourse. Synthesis contrasts with analysis in that it’s primary methods involve recourse to experience; it is experience that is at the heart of synthetic research. The synthesis of theory, architectural constructions, technological artifacts and computational techniques requires experiencing the results of experimentation. Synthetic digital architecture necessitates a discovery process incorporating creation that allows for experience, be it virtual reality, full-scale prototyping or spatial creations; provided experience is a truthful one, and not disingenuous and thereby slipping into the alternate definition of synthetic.Research’s experimental arm, as opposed to the analytic, relies on tinkering - implying the unfinished, the incomplete, the prototype. Examples of this are everywhere. Computer screenshots are a strikingly literal example of synthetic research when used as a means of experiencing a process. Performance mock-ups of building assemblies are a method of synthetic research in that one experiences a set of defined performances in order to discover and redefine the project. The watchmaker craft is an exercise in research/experimentation where material properties are inherent in function and aesthetics; consider how the components interact with the environment - motion, gravity, space-time, temperature. Efficiency at this point is predominantly structural and physical. Decorative or aesthetic elements are applied or integrated in later iterations along with optimization of performance, marketing and costs.What is a architectural research? How can research synthesize the wide range of possibilities for the trajectory of architecture when engaged in digital and computational techniques? The goals, techniques, documentation and other methods of research production have a place in architecture that must be explored, particularly as it related to computation. As in other fields, we must build a legitimate body of research whereby others can use and expand upon, such that digital architectures evolve in innovative as well as prosperous paths.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia06_104
id	acadia06_104
authors	Barrow, Larry R.
year	2006
title	Performance House: A CADCAM Modular House System
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 104-121
doi	https://doi.org/10.52842/conf.acadia.2006.104
summary	Millions of persons around the globe live in low quality indigenous, or Manufactured Housing (MH) systems that often result in low “performance” undesirable living environments and, at times, life threatening habitation. Our research has explored mass production principles in product design and architecture, currently at the single family housing scale, with a focus on the recent devastation along the US Gulf Coast as a result of hurricane impact, most notably hurricane Katrina.“Modern architecture” theoreticians have conceived, written, prototyped and even launched business ventures in an attempt to bring their manufactured housing “ideas” to fruition. However, architects have generally had little “long-term” impact in the area of manufactured housing strategies and the current manufactured housing industry remains archaic and problematic. This paper includes our research of other architects attempts to leverage technology in the manufactured housing industry; additionally, we analyzed current problems in the US mass housing industry. We then derived a set of “design criterion” as a means of anchoring our design inquiry for a proposed factory-built modular house system.Our research encompasses both process and product innovation; this paper reflects on our use of technology to leverage an Industrial Design (ID) process that is inclusive of many “design” partners and team members. We are using both virtual and physical output representation and physical prototyping for a factory-built house system; our Research and Development (R&D) is on-going with our collaborating design-manufacture engineering partners from the automotive, furniture and aerospace research labs here at Mississippi State University. Our goal is to use “industrial design” principles to produce mass housing components that provide durable-sustainable housing.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ascaad2006_paper29
id	ascaad2006_paper29
authors	Bennadji, A. and A. Bellakha
year	2006
title	Evaluation of a Higher Education Self-learning Interface
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This paper is a follow-up to a previous paper published in ASCAAD 2004 (A. Bennadji et al 2005). The latter reported on CASD (Computer Aided Sustainable Design) a self-learning educational interface which assists the various building’s actors in their design with a particular attention to the aspect of energy saving. This paper focuses on the importance of software evaluation and how the testing is done to achieve a better human-machine interaction. The paper will go through the summative evaluation of CASD, presents the output of this evaluation and addresses the challenge facing software developers: how to make an interface accessible to all users and specifically students in higher education.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	eaea2005_49
id	eaea2005_49
authors	Breen, Jack
year	2006
title	The Model Image
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 49-59
summary	Designing is a specialized, unpredictable development process which is to a large extent visually generative and reflective – and, as such, predominantly pre-linguistic. Architectural designers make creative use of various imaging techniques, in order to elucidate design concepts that would otherwise remain ‘figments of the imagination’. By projecting their ideas, into readable information, these may be shared, communicated, evaluated and developed further. In this context, various types of models play an important role on different levels of design driven enquiry and representation. This contribution explores the dynamic conditions and potentials of models in architecture, in particular as a prerequisite for visual exploration and communication.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	2006_290
id	2006_290
authors	Cenani, Sehnaz and Gulen Cagdas
year	2006
title	Shape Grammar of Geometric Islamic Ornaments
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 290-297
doi	https://doi.org/10.52842/conf.ecaade.2006.290
summary	Shape grammars are the algorithmic systems used to analyze existing designs or create new ones. In spite of using text or symbols to express abstract representations, shape grammars aid to create novel designs through computational effort with shapes and rules. Many probabilities of rule selections and applications of these rules may generate emergent design solutions or create new design objectives. This paper aims to present the characteristics, shape grammar rules and historical background of geometrical ornaments in Islamic culture and to point out the possibilities of mathematics of symmetry. The knowledge presented in this paper can be used to generate new depictions and to gain new application areas like typography, wallpaper, landscape, façade design, tiling, jewelry, and textile designs. Even, these types of shape grammar studies can be used to open a novel approach as in Jean Nouvel’s “Arab World Institute” in Paris. The role of shape grammar analysis of geometrical Islamic ornaments explained in this paper is to increase the efficiency of architectural design education by facilitating the formal understanding of historical patterns. Novel use of shape grammars in education can enrich the designer’s ability to generate original designs. In this paper variants of Islamic ornaments are created with a CAAD program. A selected geometrical bezeme (ornament) from Islamic ornamental design is generated by encoding with a computer programming language. According to the generated bezeme, interaction scenario is as follows: Computer has the main control over grammar application. Only, some of the rules can be selected by the user. Varieties of this ornament are generated randomly through their line weight, line colors, filling types and filling colors. The shape grammar rules outlined in this paper are simple, but the resulting figures can be very inspiring. Furthermore, the endless potential for future design innovations is unlimited.
keywords	Computer-generated geometrical design; shape grammar rules; geometrical Islamic ornaments; Islamic patterns
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia06_232
id	acadia06_232
authors	Chaisuparasmikul, Pongsak
year	2006
title	Bidirectional Interoperability Between CAD and Energy Performance Simulation Through Virtual Model System Framework
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 232-250
doi	https://doi.org/10.52842/conf.acadia.2006.232
summary	The paper describes a novel approach involving interoperability, data modeling technology, and application of the building information model (BIM) focused on sustainable architecture. They share relationships and multiple experiences that have existed for years but have never have been proven. This interoperability of building performance simulation maps building information and parametric models with energy simulation models, establishing a seamless link between Computer Aided Design (CAD) and energy performance simulation software. During the last four decades, building designers have utilized information and communication technologies to create environmental representations to communicate spatial concepts or designs and to enhance spaces. Most architectural firms still rely on hand labor, drafted drawings, construction documents, specifications, schedules and work plans in traditional means. 3D modeling has been used primarily as a rendering tool, not as the actual representation of the project.With this innovative digitally exchange technology, architects and building designers can visually analyze dynamic building energy performance in response to changes of climate and building parameters. This software interoperability provides full data exchange bidirectional capabilities, which significantly reduces time and effort in energy simulation and data regeneration. Data mapping and exchange are key requirements for building more powerful energy simulations. An effective data model is the bidirectional nucleus of a well-designed relational database, critical in making good choices in selecting design parameters and in gaining and expanding a comprehensive understanding of existing data flows throughout the simulation process, making data systems for simulation more powerful, which has never been done before. Despite the variety of energy simulation applications in the lifecycle of building design and construction projects, there is a need for a system of data integration to allow seamless sharing and bidirectional reuse of data.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2006_690
id	2006_690
authors	Chuen-huei Huang, Joseph and Robert Krawczyk
year	2006
title	i_Prefab Home - Customizing Prefabricated Houses by Internet-Aided Design
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 690-698
doi	https://doi.org/10.52842/conf.ecaade.2006.690
summary	The paper demonstrates a web-based system for use in the area of prefabricated housing to assist the customer and architect in selecting appropriate building components. By collecting and evaluating client’s requirements with web technology, a methodology can be developed that can generate design options based on the client’s needs and available modular components in the market, and simulate the final design before beginning manufacturing. In this proposed model, a process of providing mass-customized prefabricated housing based on computer-aided design and a web-based product configuration system will be presented. How prefabricated housing design can be evolved from a mass repetitive production level to a mass customization level to meet variability and personality is the primary issue to be explored in this research.
keywords	Web-based design; clients input; mass customization; prefabrication
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac20064202
id	ijac20064202
authors	de Vries, Bauke; Buma, Sjoerd; Jessurun, Joran
year	2006
title	An Intuitive Interface for Building Management and Planning
source	International Journal of Architectural Computing vol. 4 - no. 2, 17-26
summary	Building management and planning professionals utilize database systems for administrative support, but these systems are inadequate for conveying architectural plans. In this article we describe the so-called Virtual Maquette that was developed at the Eindhoven University of Technology for the board of the University. The Virtual Maquette consists of a vertical display for 3D view and information of building stock, and an interactive horizontal display for manipulation of view and information. Interaction is implemented using infrared tracking of devices that are positioned on the desktop with the projected plan view. Through this interface the states of the buildings can be inspected at different periods in history and in the future. The support of multiple devices in a single environment is a technical challenge, but it provides a new interaction method for non-technical persons.
series	journal
last changed	2007/03/04 07:08

_id	eaea2005_000
id	eaea2005_000
authors	Dechène, Sigrun und Manfred Walz (Eds.)
year	2006
title	Motion, E-Motion and Urban Space
source	Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4, 260 p.
summary	Simulating the development and the image of architecture and urban design means to show how the environment of the future and the living conditions could develop. At the same time it is part of our task to explain our work to local people and to the public and to passion skills in methods, instruments and knowledge in planning to the next generation of architects, planners and last but not least to discuss and to renew them once more for ourselves. Our aim was also to reflect what we have done since starting the look through the key-hole of endoscopy. Meanwhile this look has been completed since the beginnings in 1993 much more by computer and monitor. It is not the question to take the endoscope or the computer as a methodical and instrumental approach. Nowadays we normally decide to take the endoscope and the computer. In preparing the conference and the workshop we thought that this should now also be the moment not only to inform each other and the participants on methods, tools and best practices in simulating and designing the environment but also to focus on the social and human consequences of perception, movement and use the present urban spaces and the urban space in future. So we proposed the theme “MOTION, E-MOTION and URBAN SPACE” and we invited a scientific expert in experimental psychology to give us some serious reflections and one or another hint on our research themes and methods. The contributions and discussions in the conference showed that the proposal has not only been accepted but has also been completed and enriched especially concerning the theme urban space, it’s processes of usage and it‘s atmosphere. Also in the themes of endoscopy and the research on modelling urban spaces and architecture, meanwhile nearly “traditional” ones, remarkable results were presented and discussed. A very important point of contributions and the following discussions was how to present our subjects to the interested public and to improve our own internal exchange. An object could be to enforce the research tasks in researching together even more.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	bsct_dervishi
id	bsct_dervishi
authors	Dervishi, Sokol
year	2006
title	Computational Derivation of Incident Irradiance on Building Facades based on Measured Global Horizontal Irradiance Data
source	Vienna University of Technology; Building Science & Technology
summary	Reliable simulation of buildings' energy performance requires, amongst other things, the availability of detailed information on the magnitudes of incident solar radiation on building facades. However, the availability of the measured data concerning the incident solar radiation on vertical surfaces is restricted to only few locations. In addition, concurrent measurements of horizontal global and horizontal diffuse (or direct normal) irradiance data are likewise available only for a limited number of locations. In contrast, global horizontal irradiance data is available for many locations. This research demonstrates how to computationally derive incident irradiance values on vertical (or otherwise inclined) building surfaces from measured globalirradiance values. Given this context, three methods are considered to compute incident vertical irradiance values based on measured global horizontal irradiance data. Vertical solar irradiance measurements are described. Then, the computationally derived values are compared withcorresponding measurements. The results are evaluated based on their correlation coefficients and relative error. Finally, the application of horizontal-to- vertical irradiance mapping is demonstrated using the case of an office building at Vienna University of Technology.
keywords	Horizontal and vertical irradiance, measurement and simulation, energy performance
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2006/07/02 22:30

_id	7987
id	7987
authors	Dimitrios Makris, Ioannis Havoutis, Georges Miaoulis, Dimitri Plemenos
year	2006
title	MultiCAD – MOGA A System for Conceptual Style Design of Buildings
source	Conference Proceedings of the 9th 3IA (2006) International Conference on Computer Graphics and Artificial Intelligence, p73-84
summary	The synthesis of the three-dimensional morphology of a building is one of the most important tasks in architecture. Space planning and morphology are of the most interesting and complex of architectural design problems. Architectural design is guided by the constraints on the spatial composition and the morphology of the final building. During the conceptual phase problems are characterised by fuzziness and complexity. Building requirements are ill-defined and contradictory. The designer should explore the solution space for alternative building solutions while refining requirements and style preferences. In this paper we present the development and implementation of an Evolutionary Declarative Design system prototype for the aid of conceptual style design of buildings. The system is a specific MultiCAD prototype system including architectural knowledge, architectural style and a multi-objective genetic algorithm. Two design cases are presented for two different architectural styles. The applicability and efficiency of the system prototype are discussed.
keywords	declarative modelling, evolutionary design, multi-objective genetic algorithms, architectural conceptual design, constraints
series	other
type	normal paper
email
more	http://3ia.teiath.gr/3ia_previous_conferences_cds/2006/Papers/Full/Makris_8.pdf
last changed	2007/11/29 15:55

For more results click below: