Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 613

Reformat results as: short short into frame detailed detailed into frame

_id	bsct_paipai
id	bsct_paipai
authors	Paipai, Angeliki
year	2006
title	Computational Assessment of Passive Cooling Methods in Buildings
source	Vienna University of Technology; Building Science & Technology
summary	Various factors have been contributing to a recent steady increase in buildings’ demands for cooling energy: environmental changes, increased heat gains due to equipment and growing expectations in view of acceptable indoor thermal conditions. Given this context, it’s both environmentally and economically meaningful to develop and implement passive cooling techniques toward the reduction of buildings’ demand for cooling energy. In the present study, we use parametric simulations to compute the relative impact of various passive cooling technologies toward the reduction of overheating risk in residential buildings. The cooling measures under examination are shading, natural ventilation (emphasizing on night time natural ventilation), and the application of phase change materials (PCM). The buildings that are being used for the parametric studies are an apartment and a double-storey single house, both simulated for a Mediterranean climate (Athens, Greece) and middle-European one (Vienna, Austria). The results showed that passive cooling methods can significantly contribute the reduction of overheating in buildings. In particular shading and night time ventilation have been shown to be very effective especially if applied in combination. PCMs on the other hand, showed a limited potential in the reduction of overheating risk, at least under the specific climatic circumstances.
keywords	Passive cooling; Parametric modeling; Thermal storage; Night ventilation; Phase Changing materials
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2006/07/02 22:30

_id	sigradi2006_e090b
id	sigradi2006_e090b
authors	Hanna, Sean and Turner, Alasdair
year	2006
title	Teaching parametric design in code and construction
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 158-161
summary	Automated manufacturing processes with the ability to translate digital models into physical form promise both an increase in the complexity of what can be built, and through rapid prototyping, a possibility to experiment easily with tangible examples of the evolving design. The increasing literacy of designers in computer languages, on the other hand, offers a new range of techniques through which the models themselves might be generated. This paper reviews the results of an integrated parametric modelling and digital manufacturing workshop combining participants with a background in computer programming with those with a background in fabrication. Its aim was both to encourage collaboration in a domain that overlaps both backgrounds, as well as to explore the ways in which the two working methods naturally extend the boundaries of traditional parametric design. The types of projects chosen by the students, the working methods adopted and progress made will be discussed in light of future educational possibilities, and of the future direction of parametric tools themselves. Where standard CAD constructs isolated geometric primitives, parametric models allow the user to set up a hierarchy of relationships, deferring such details as specific dimension and sometimes quantity to a later point. Usually these are captured by a geometric schema. Many such relationships in real design however, can not be defined in terms of geometry alone. Logical operations, environmental effects such as lighting and air flow, the behaviour of people and the dynamic behaviour of materials are all essential design parameters that require other methods of definition, including the algorithm. It has been our position that the skills of the programmer are necessary in the future of design. Bentley’s Generative Components software was used as the primary vehicle for the workshop design projects. Built within the familiar Microstation framework, it enables the construction of a parametric model at a range of different interfaces, from purely graphic through to entirely code based, thus allowing the manipulation of such non-geometric, algorithmic relationships as described above. Two-dimensional laser cutting was the primary fabrication method, allowing for rapid manufacturing, and in some cases iterative physical testing. The two technologies have led in the workshop to working methods that extend the geometric schema: the first, by forcing an explicit understanding of design as procedural, and the second by encouraging physical experimentation and optimisation. The resulting projects have tended to focus on responsiveness to conditions either coded or incorporated into experimental loop. Examples will be discussed. While programming languages and geometry are universal in intent, their constraints on the design process were still notable. The default data structures of computer languages (in particular the rectangular array) replace one schema limitation with another. The indexing of data in this way is conceptually hard-wired into much of our thinking both in CAD and in code. Thankfully this can be overcome with a bit of programming, but the number of projects which have required this suggests that more intuitive, or spatial methods of data access might be developed in the future.
keywords	generative design; parametric model; teaching
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	2006_458
id	2006_458
authors	Laskari, Iro
year	2006
title	Automatic production of paths within audiovisual “narrative space” by making use of genetic algorithms
doi	https://doi.org/10.52842/conf.ecaade.2006.458
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 458-461
summary	This paper documents the theoretical aspect of a research project that deals with the application of an artificial life (AL) approach to engraving coherent paths within the narrative space of video fragments. These paths, which are constituted by the succession of short video segments, represent the best way to juxtapose isolated elements in the overall narrative landscape. In this case the notion of space is being used in a metaphorical way. Once this has been clarified, the concept of “narrative space” is used as a metaphorical representation of a database comprising all the fragmented/autonomous narrations that are being used. Therefore, the creation of an “intelligent” system that will be able to automatically create cinematographic narration is being examined. This project in particular investigates the possibility and the consequences of producing an autonomous cinematographic narration system, in which meaning results from a kind of hypermontage (Hakola, http://www.kromaproductions.net/HYPERMONTAGE.htm: Jan 2003) conditioned by genetic algorithms. A different type of spatial experience emerges when the video fragments used are automatically “put together” by the system. Video as a medium could be considered as representing crystallized shortcuts within physical reality. Since video fragments constitute the database, different elements of constructed space are parts of the same ensemble. From the composition of such fragments, there emerge new paths within the same spatial context and certain spatial experiences are formulated which are different from the ones experienced by actors during the shootings.
keywords	Non - linear narrative; cinematic language; Artificial Life
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia06_261
id	acadia06_261
authors	Lömker, Thorsten M.
year	2006
title	Revitalization of Existing Buildings through Sustainable Non-Destructive Floor Space Relocation
doi	https://doi.org/10.52842/conf.acadia.2006.261
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 261-268
summary	The revitalization of existing buildings is gaining importance. We are facing a development where, in many cases, there is no need to design new buildings because an increasing number of existing buildings are not used anymore. The most ecological procedure to revitalize these buildings would be through a continued usage and by making few or no alterations to the stock. Thus, the modus operandi could be called a “non-destructive” approach.From the architect’s point of view, non-destructive redesign of existing buildings is time-consuming and complex. The methodology we developed to aid architects in solving such tasks is based on exchanging or swapping utilization of specific rooms in order to reach a design solution. With the aid of mathematical rules, which will be executed by the use of a computer, solutions to floor space relocation problems will be generated. Provided that “design” is in principle a combinatorial problem, i.e., a constraint-based search for an overall optimal solution of a problem, an exemplary method will be described to solve such problems.The design of the model developed is related to problems in logistics (e.g., the loading in trans-shipment centers). The model does not alter geometric proportions or locations of rooms, but solely changes their occupancy such that a new usage could be applied to the building. From our point of view, non-destructive models can play an important role in floor space relocation processes. Our examinations demonstrate that new patterns of utilization could be found through the use of this model.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	ecaade2007_143
id	ecaade2007_143
authors	Ulmer, Andreas; Halatsch, Jan; Kunze, Antje; Müller, Pascal; Gool, Luc Van
year	2007
title	Procedural Design of Urban Open Spaces
doi	https://doi.org/10.52842/conf.ecaade.2007.351
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 351-358
summary	This paper presents a novel approach for the automatic creation of vegetation scenarios in real or virtual 3D cities in order to simplify the complex design process and time consuming modeling tasks in urban landscape planning. We introduce shape grammars as a practical tool for the rule-based generation of urban open spaces. The automatically generated designs can be used for pre-visualization, master planning, guided design variation and digital content creation in general (e.g. for the entertainment industry). In a first step, we extend the CGA shape grammar by Müller et al. (2006) with urban planning operations. In a second step, we employ the possibilities of shape grammars to encode design patterns (Alexander et al., 1977). Therefore, we propose several examples of design patterns allowing for an intuitive high-level placement of objects common in urban open spaces (e.g. plants). Furthermore, arbitrary interactions between distinct instances of the vegetation and the urban environment can be encoded. With the resulting system, the designer can efficiently vegetate landscape and city parks, alleys, gardens, patios and even single buildings by applying the corresponding shape grammar rules. Our results demonstrate the procedural design process on two practical example scenarios, each one covering a different scale and different contexts of planning. The first example illustrates a derivation of the Garden of Versailles and the second example describes the usage of high-level rule sets to generate a suburbia model.
keywords	City modeling, design methodology, generative design, simulation, virtual environments
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2006_269
id	caadria2006_269
authors	MATTHIAS HAASE, ALEX AMATO
year	2006
title	ND MODELLING FOR SUSTAINABLE ENVELOPES: The sustainable dimensions of envelope design
doi	https://doi.org/10.52842/conf.caadria.2006.x.e6l
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 269-276
summary	Sustainable development issues are currently the driving forces in many building projects. The building envelope is critical for the architectural expression as well as large parts of the environmental performance. This study tries to investigate the advantages of multidimensional computer aided modeling and simulation for a sustainable facade design approach. A first step towards nD modeling for sustainable design is to establish a list of parameter which are used as design criteria: Environmental performance, thermal visual and acoustic comfort. Computer simulation and analysis of different building elements can help to determine the performance according to a set of design parameter. Environmental impacts due to energy consumption are an important parameter but it is believed that comfort criteria need also to be accounted for.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	cf2011_p003
id	cf2011_p003
authors	Ng, Edward; Ren Chao
year	2011
title	Sustainable Planning with a Synergetic Collation of Thermal and Dynamic Characteristics of Urban Climate using Map Based Computational Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 367-382.
summary	Since 2006, half of the world’s population lives in cities. In the age of climate change, designing for quality environmental living conditions and sustainability is a topical concern. However, on the one hand, designers and city planners operate with their three dimensional city morphological data such as building shapes and volumes, forms and their spacings, and functional attributes and definition signatures. On the other hand, urban climatologists operate with their numbers and equations, quantities and signals, and normals and anomalies. Traditionally the two camps do not meet. It is a challenge to develop design tools that they can work together. Map based information system based on computational geographic information system (GIS) that is properly structured and represented offers a common language, so to speak, for the two professional groups to work together. Urban climatic map is a spatial and graphical tool with information embedded in defined layers that are collated so that planners and urban climatologists can dialogue over design issues. With various planning and meteorological data coded in defined grid resolutions onto the GIS map system, data can be synergized and collated for various understandings. This papers explains the formulation of Hong Kong’s GIS based Urban Climatic Map as an example of how the map works in practice. Using the map, zonal and district based planning decisions can be made by planners and urban climatologists that lead to new designs and policy changes.
keywords	sustainable development, urban planning, urban thermal, urban dynamics, computer tools
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia06_403
id	acadia06_403
authors	Taylor, Justin
year	2006
title	The Value of Arrhythmic Sounds in Isolated Space
doi	https://doi.org/10.52842/conf.acadia.2006.403
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 403-409
summary	This study examines the impact of bringing sound uninterrupted from outside a building into isolated spaces within the building. Is a silent space less or more productive than a space that is filled with normal outside sounds? Can bringing sound in from the outside, thereby allowing the users an uninterrupted connection to the outside without being in physical proximity of the exterior, make a difference in the work they do?Using music in these spaces has become commonplace. However, this research chooses to address sounds that do not mask the arrhythmic sounds of the world. These random sounds might break a person’s concentration, just as a bird flying by a window breaks one’s concentration. Even though these sounds of nature, vehicles, and people interrupt, do they give a greater sense of place than ambient music? Do these breaks in concentration help keep an individual oriented and aware of time while increasing both comfort and connection to the work being done?To test this thesis, students working in an isolated studio/classroom space will be subjected to the same sounds students in rooms near the outside would hear. Sounds will be provided by a direct audio link with the outside of the building. Student reaction will be evaluated by a series of observations and surveys that will focus on any differences in the amount of time spent on task, the sense of productivity experienced, the overall sense of functioning at a higher level and the interaction of student and professor.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ascaad2006_paper8
id	ascaad2006_paper8
authors	Abdullah, Sajid; Ramesh Marasini and Munir Ahmad
year	2006
title	An Analysis of the Applications of Rapid Prototyping in Architecture
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	Rapid prototyping (RP) techniques are widely used within the design/manufacturing industry and are well established in manufacturing industry. These digital techniques offer quick and accurate prototypes with relatively low cost when we require exact likeness to a particular scale and detail. 3D modeling of buildings on CAD-systems in the AEC sector is now becoming more popular and becoming widely used practice as the higher efficiency of working with computers is being recognized. However the building of scaled physical representations is still performed manually, which generally requires a high amount of time. Complex post-modernist building forms are more faithfully and easily represented in a solid visualization form, than they could be using traditional model making methods. Using RP within the engineering community has given the users the possibility to communicate and visualize designs with greater ease with the clients and capture any error within the CAD design at an early stage of the project or product lifecycle. In this paper, the application of RP in architecture is reviewed and the possibilities of modeling architectural models are explored. A methodology of developing rapid prototypes with 3D CAD models using methods of solid freeform manufacturing in particular Fused Deposition Modeling (FDM) is presented and compared against traditional model making methods. An economical analysis is presented and discussed using a case study and the potential of applying RP techniques to architectural models is discussed.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	2006_032
id	2006_032
authors	Al-Attili, Aghlab and Leonidas Koutsoumpos
year	2006
title	Ethics of Virtuality… Virtuality of Ethics
doi	https://doi.org/10.52842/conf.ecaade.2006.032
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 32-39
summary	This paper addresses issues pertaining to architecture, virtuality and ethics by establishing an interactive, non-linear virtual environment as a tool for investigation into the virtuality of ethics and ethics of virtuality, in the context of architecture. Starting from the assertion that ‘Virtual Environment (VE) is a metaphor of Real Environment (RE)’, we test the proposition that suggests ‘Ethics of RE can be tested and simulated in VE’. Challenging the notion that sees people reacting to VE in the same way as they interact with their surroundings in RE, we propose that since ethics are engulfing architecture they are also present and simulated in VE. Virtual architecture has elements of ethics that we refer to as ‘Ethics of Virtuality’. In this context, VE ethics seem to lose the ubiquity that is present in RE. In order to examine this hypothesis, we created a VE that corresponds to the RE of the PhD students’ offices, within the Department of Architecture, School of Arts, Culture, and Environment in the University of Edinburgh. The real life users of these offices were subjected to this VE. A qualitative method of research followed to probe their experience, focusing on issues related to ethics. Subjects were asked to give a personal accounts of their experience which gave us an insight into how they think. The compiled list of results and their evaluation showed startling possibilities, further establishing VE as an arena for investigating issues pertaining to both architecture and ethics.
keywords	Virtual Environments; Ethics; Place; Representation; Trust
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2006_e160c
id	sigradi2006_e160c
authors	Andrade, Max and Cheng, Liang-Yee
year	2006
title	Diretrizez Geométricas de Auxílio ao Processo de Projeto de Edifícios Residenciais [Geometrical Guidelines to Aid the Design of Floor Plants of Residential Buildings]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 243-247
summary	This paper discusses the basic principles of a geometric method to aid the design process of residential buildings. It makes part of the initial phases of a research whose aim is to develop a computer system to aid the sketching and evaluation of floor plant design of multi-storied residential buildings. The fundamental idea of the research is the existence of some basic patterns of floor plants that reflect the designer’s mental models in this category of building. The models are regarding the usage of the space such as forms and dimensions, the elements for the circulation and the external skins. During the design process, architects work on each one of these models to generate the sketches of the floor plant layout. Generally, the layout of an apartment in multi-storied buildings depends basically on the internal dynamics of the users without the complex relationship with the neighborhood environment as in the case of houses. In this way, it would be easier to identify, to organize and to associate the mental models of multi-storied buildings on geometric basis, which, in their turns, might be effectively used as inputs for the layout planning of new design. By applying the geometric basis, the architects may reduce the universe of feasible alternatives into a small group of heuristic solutions that can be described by using few simple guidelines. In addition to this, the geometric bases of the existing buildings might be used to build a knowledge-based system to aid the architectural design. The objective of this paper is to show some initial results of the research obtained from a survey and the case studies of form, dimensions and topology of existing buildings. To limit the scope of the discussion, only residential buildings with two to three bedrooms are considered. At first, a survey of plants of residential buildings with two and three bedrooms, in Brazil, is carried out. In the next step, the dimensions, shape, external skin perimeter, circulation system and accessibility are analyzed. Finally, typical topologies of the building are investigated.
keywords	Design process; geometric method; residential buildings
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2006_000
id	2006_000
authors	Bourdakis, Vassilis and Charitos, Dimitris (eds.)
year	2006
title	Communicating Space(s)
doi	https://doi.org/10.52842/conf.ecaade.2006
source	24th eCAADe Conference Proceedings [ISBN 0-9541183-5-9], Volos (Greece) 6-9 September 2006, 914 p.
summary	The theme of this conference builds on and investigates the pre-existing and endlessly unfolding relationship between two domains of scientific inquiry: Architecture, urban design and planning, environmental design, geography and Social theory, media and communication studies, political science, cultural studies and social anthropology. Architectural design involves communication and could thus be partly considered a communicational activity. Designers (or not) see architectural designs, implicitly, as carriers of information and symbolic content; similarly buildings and urban environments have been “read” and interpreted by many (usu- ally not architects) as cultural texts. At the same time, social and cultural studies have studied buildings and cities, as contexts for social and cultural activities and life in general, from their mundane expression of “everyday life” (Highmore, 2001) to elite expressions of artistic creativity and performance. Information and communication technologies (ICTs) support both of these levels of scientific inquiry in many ways. Most importantly however, ICTs need design studies, architectural and visual design, social and cultural studies in their quest to create aesthetically pleasing, ergonomically efficient and functional ICT sys- tems; this need for interdisciplinarity is best articulated by the low quality of most on-line content and applica- tions published on the web.
series	eCAADe
type	normal paper
email
more	http://www.ecaade.org
last changed	2022/06/07 07:49

_id	sigradi2006_e070c
id	sigradi2006_e070c
authors	Cardoso, Daniel
year	2006
title	Controlled Unpredictability: Constraining Stochastic Search as a Form-Finding Method for Architectural Design
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 263-267
summary	Provided with a strict set of rules a computer program can perform the role of a simple designer. Taking advantage of a computer’s processing power, it can also provide an unlimited number of variations in the form while following a given set of constraints. This paper delineates a model for interrelating a rule-based system based on purely architectural considerations with non-deterministic computational procedures in order to provide controlled variations and constrained unpredictability. The experimental model consists of a verisimilar architectural problem, the design of a residential tower with a strict program of 200 units of different types in a given site. Following the interpretation of the program, a set of rules is defined by considering architectural concerns such as lighting, dimensions, circulations, etc. These rules are then encoded in a program that generates form in an unsupervised manner by means of a stochastic search algorithm. Once the program generates a design it’s evaluated, and the parameters on the constraints are adjusted in order to produce a new design. This paper presents a description of the architectural problem and of the rule building process, images and descriptions of three different towers produced, and the code for the stochastic-search algorithm used for generating the form. The succesful evolution of the experiments show how in a computation-oriented design process the interpretation of the problem and the rule setting process play a major role in the production of meaningful form, outlining the shifting role of human designers from form-makers to rule-builders in a computation-oriented design endeavour.
keywords	Architectural Design; Stochastic; Random; Rule-based systems; Form-generation
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	8b29
id	8b29
authors	Chaszar, A. (ed.), Burry, M., Eliassen, T., Garofalo, D., Glymph, J., Hesselgren, L., Jonkhans, N., Kienzl, N., Kloft, H., Maher, A., Mueller, V., Palmer, A., Reuss, S., Schuler, M., Schwitter, C., Sharples, C., Sharples, W., Shea, K., Stoller, P., Takemori, T., Woodger, N.
year	2006
title	Blurring the Lines: Computer-Aided-Design and -Manufacturing in Architecture
source	Wiley-Academy, London 224 pp. Architecture in Practice series
summary	The first few years of the 21st century have seen a revolution in the ways that we think about designing and making buildings. In no other area is this more apparent than in the interface of computer-aided design (CAD) and computer-aided manufacture (CAM). The potential blurring or assimilation of these two systems holds the still elusive but golden promise of a direct, smooth transference of design data into large-scale production facilities in which components are directly cut, modelled and moulded. How far off are we from seeing the widespread adoption of this technology? What is the potential for CAD/CAM beyond tailor-made forms? In the future, what is the possibility of complex, large-scale forms being run out in mass-customised buildings?
keywords	associative geometry, auralization, CNC, collaborative design, generative design, parametric design, simulation, visualization
series	book
type	normal paper
email
last changed	2006/06/12 23:35

_id	2006_684
id	2006_684
authors	De Bodt, Kathleen
year	2006
title	SoundScapes & Architectural Spaces - Spatial sound research in digital architectural design
doi	https://doi.org/10.52842/conf.ecaade.2006.684
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 684-689
summary	The paper presents ongoing research focusing on the development of digital tools and methodologies for spatial design based on non-Euclidean geometries. It addresses the way sound can be used both conceptually and acoustically in the early stages of the design process, examining digital architectural design and modeling based on three-dimensional sound visualization and the acoustical analysis and evaluation of complex curved surface geometry. The paper describes SoundMatrix, the first part of a digital design tool created by using Max/Msp/Jitter, to assist in the preliminary design of building façades in small-scale urban environments, specifically studying the possibilities of curvature to decrease sound reflection between opposing street façades. Examples from a workshop with the SoundMatrix application illustrate the real-time 3D authoring and sound spatialisation processing currently implemented in the tool.
keywords	graphical programming; performance-based design; generative design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ijac20064202
id	ijac20064202
authors	de Vries, Bauke; Buma, Sjoerd; Jessurun, Joran
year	2006
title	An Intuitive Interface for Building Management and Planning
source	International Journal of Architectural Computing vol. 4 - no. 2, 17-26
summary	Building management and planning professionals utilize database systems for administrative support, but these systems are inadequate for conveying architectural plans. In this article we describe the so-called Virtual Maquette that was developed at the Eindhoven University of Technology for the board of the University. The Virtual Maquette consists of a vertical display for 3D view and information of building stock, and an interactive horizontal display for manipulation of view and information. Interaction is implemented using infrared tracking of devices that are positioned on the desktop with the projected plan view. Through this interface the states of the buildings can be inspected at different periods in history and in the future. The support of multiple devices in a single environment is a technical challenge, but it provides a new interaction method for non-technical persons.
series	journal
last changed	2007/03/04 07:08

_id	acadia06_304
id	acadia06_304
authors	Dorta, T., Perez, E.
year	2006
title	Immersive Drafted Virtual Reality a new approach for ideation within virtual reality
doi	https://doi.org/10.52842/conf.acadia.2006.304
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 304-316
summary	There is a void between design and computer in ideation. Traditional tools like sketching are more appropriate for conceptual design since they can sustain abstraction, ambiguity, and inaccuracy—essentials at the beginning of the design process. Actual graphical user interface approaches, as well as hardware devices, constrain creative thinking. Computer representations and virtual reality are now used for presentation and validation rather than for design. Most virtual reality tools are seen as passive rather than active instruments in this process of ideation. Moreover, virtual reality techniques come from other disciplines and are applied to design without considering the design process itself and the skills designers already possess.This paper proposes and evaluates a new approach for the conceptual design of spaces within virtual reality. Starting from the non-immersive technique we developed before, where the user was able to be inside a 3D modeled space through real sketches, this technique goes one step further, allowing the designer to sketch the space from the inside all in real-time. Using an interactive pen display for sketching and an immersive projective spherical display, designers and colleagues are able to propose and make design decisions from inside the project. The capabilities of the computer to display the virtual environment are, therefore, mixed with the designer’s skills in sketching and understanding the space.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2006_778
id	2006_778
authors	Dritsas, Stylianos; Renos Charitou and Lars Hesselgren
year	2006
title	Computational Methods on Tall Buildings - The Bishopsgate Tower
doi	https://doi.org/10.52842/conf.ecaade.2006.778
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 778-785
summary	This paper summarizes the ongoing research done on The Bishopsgate Tower in the City of London using parametric design methodologies. The process is indicative of how computational methods will develop in the future and help designers find solutions for increasingly complex spaces.
keywords	Tall Buildings; Computational Geometry; Building Information Management; Façade Optimization
series	eCAADe
email
last changed	2022/06/07 07:55

_id	5094
id	5094
authors	d’Estrée Sterk, Tristan
year	2006
title	Responsive Architecture: User-centered Interactions within the Hybridized Model of Control
source	Proceedings of the GAME, SET, MATCH II, conference at the Technical University of Delft, Netherlands, 29 March - 1 April 2006, pp. 494-501
summary	In the September 1969 issue of Architectural Design, Andrew Rabeneck wrote about the use of cybernetic devices within an automated architecture. He hypothesized that the concept of ‘flexibility’ was introduced to architecture because existing building technologies were inherently inflexible. He argued that architects should use cybernetic technologies to produce completely new types of increasingly flexible, user-centred, buildings. Three years later, Yona Friedman wrote about the changing relationship between clients and architects. He said that a new design methodology was needed because architects could not assess the future spatial needs of building users accurately enough. Proposing a new model, he split architectural design in two complementary halves, hardware design and software design, reasoning that this would give users the opportunity to adapt built spaces to suit their needs. Both of these ideas describe approaches to the production of an architecture that can change shape and configuration in response to changing patterns of use. Rabeneck’s approach illustrates the benefit of predictive technologies and automation, while Friedman’s model illustrates the benefit of user intervention and direct manipulation. This paper discusses developments in the field of responsive architecture in relation to two opposing user-centred interaction methodologies. It proposes methods for controlling responsive buildings and suggests that human computer interaction methodologies need to be re-thought and extended when applied within intelligent, responsive, architectures.
keywords	Responsive architecture, User-centred design, HCI, Intelligent buildings
series	other
type	normal paper
email
more	admin
last changed	2017/04/10 13:08

_id	2006_590
id	2006_590
authors	Flanagan, Robert
year	2006
title	Restructuring Cubist Narratives in Non-Linear Time
doi	https://doi.org/10.52842/conf.ecaade.2006.590
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 590-596
summary	The design of architectural environments through non-linear, abstract design techniques presents a significant opportunity for current architectural design theory. This paper explores time-functions in design, whether implied or actual, that are potentially interchangeable, and that are at least partially translatable between painting (implied) and film (actual). The founding theory is rooted in the convergence of two turn-of-the-century inventions: Cinématographe (1895), and Cubism (Picasso and Braque, 1906). A century later, the development of inexpensive digital tools facilitates essential capabilities in the application of time-functions in architectural design: the virtual simulation of dimensional space, and a practical approach to non-linear video editing.
keywords	translation; restructure; video; non-linear; Cubism
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: