Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 584

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2006_c177b
id	sigradi2006_c177b
authors	Rossado Espinoza, Veronica Paola
year	2006
title	Enseñanza de Dibujo Arquitectonico con Medios Digitales: La Expresion Arquitectonica Actual [Architectural drawing with digital media: The actual architectural expression]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 200-204
summary	The Faculty of Architecture and Urbanism of the Ricardo Palma University incorporated more than 15 years ago the obligatory course of Drawing by Computer. Since then, and in view of the technological advances and the exigencies of the market, the lectures have been modified from those that traditionally used manual means. There are many lectures that use digital means in the Faculty, the present investigation tries to show to the objectives and methodology used in these lectures. The Faculty has the area of Communications; this area includes three courses for the education of Computer Drawing, 2D, 3D and virtual presentations. We have for example, inside the area of communications, the different modifications that have suffered the drawing courses, in the technology area, the courses of Environmental Technology, and in the area of workshops, the appearance of a virtual workshop that is carried out entirely with the employment of the digital technology.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	sigradi2006_e113b
id	sigradi2006_e113b
authors	Sanza, Paolo
year	2006
title	The built environment revisited digitally: an approach to 2D and 3D CAD teaching
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 215-218
summary	There is a characteristic that distinguishes the School of Architecture at Oklahoma State University from other architecture schools in the United States and that is the absence of a design studio in the spring semester of the third year. Among the various classes the students are required to take during this time is ARCH 3253_computer applications in architecture defined in the School catalog as an “introduction to 2D and 3D computer CAD topics and their application in the design process.” The absence of a design studio has allowed [me] to morph an otherwise technically oriented course to a course that weaves the learning of the basic of various computer programs with research, writing, graphic and physical explorations. This paper exposes the pedagogy of the course alongside sample of students’ work during the spring 2006 semester and will disclose its future development as web and film technologies are introduced to the course. The introduction of the “forth dimension” to the course will both augment and foster alternative means of architectural communication by promoting multimodal representations and will respond to the personal observation that in spite of the essentially total use of the computer in the daily creative life of students and professionals alike, the architectural representation output has virtually remained unchanged [and for the most part unchallenged] since the time when pens, pencils, and papers were the media of choice. In addition to its pedagogical character, the paper will also share the personal explorations that triggered following one of the assignments and led to the development and realization of a graphic piece for one of the summer 2006 exhibits at the Scottsdale Museum of Contemporary Art in Scottsdale, Arizona and prompted the initial development of the design of a restaurant, also in Scottsdale, Arizona [in its schematic design phase at the time of the writing of this abstract].
keywords	virtual; representation; 4th dimension
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	acadia06_304
id	acadia06_304
authors	Dorta, T., Perez, E.
year	2006
title	Immersive Drafted Virtual Reality a new approach for ideation within virtual reality
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 304-316
doi	https://doi.org/10.52842/conf.acadia.2006.304
summary	There is a void between design and computer in ideation. Traditional tools like sketching are more appropriate for conceptual design since they can sustain abstraction, ambiguity, and inaccuracy—essentials at the beginning of the design process. Actual graphical user interface approaches, as well as hardware devices, constrain creative thinking. Computer representations and virtual reality are now used for presentation and validation rather than for design. Most virtual reality tools are seen as passive rather than active instruments in this process of ideation. Moreover, virtual reality techniques come from other disciplines and are applied to design without considering the design process itself and the skills designers already possess.This paper proposes and evaluates a new approach for the conceptual design of spaces within virtual reality. Starting from the non-immersive technique we developed before, where the user was able to be inside a 3D modeled space through real sketches, this technique goes one step further, allowing the designer to sketch the space from the inside all in real-time. Using an interactive pen display for sketching and an immersive projective spherical display, designers and colleagues are able to propose and make design decisions from inside the project. The capabilities of the computer to display the virtual environment are, therefore, mixed with the designer’s skills in sketching and understanding the space.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2006_132
id	2006_132
authors	Guéna, François and Louis-Paul Untersteller
year	2006
title	Towards a Sketching Tool for Architects: 3D Reconstruction of Polyhedron
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 132-135
doi	https://doi.org/10.52842/conf.ecaade.2006.132
summary	This paper presents a tool for assisting 3D modeling from perspective projections. The proposed system uses a projective geometry engine capable of rebuilding a 3D model from a set of lines and geometric constraints. A dialogue interface assists the user in expressing geometric constraints. The system finds out the relevant geometrical components in the sketch and automatically posts the constraints. The system is limited to rebuilding polyhedrons. If we can deduce, from a perspective sketch of a polyhedron, the planar constraints of the faces and the parallelism constraints of the edges that meet in the same vanishing points, the geometric engine will be able to build a 3D model of the polyhedron.
keywords	sketching; 3D reconstruction; projective geometry
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2006_730
id	2006_730
authors	Paterson, Inga
year	2006
title	Architectural Interiors and Exteriors in Computer Games
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 730-737
doi	https://doi.org/10.52842/conf.ecaade.2006.730
summary	This paper looks at the design of place in a game environment. Many 3D video games have a strong orientation to streetscape and interior design. This paper questions what can be learned from architectural insights and examines how cultural references can be used in computer games to enhance the game experience by supporting game play through a deepened sense of immersion. Focusing on the cultural ideologies of play, this paper sets out to consider the suitability of real-world building design in the creation of game-world environments, with an emphasis on how level design can be enhanced through a deepened understanding of the virtual locations in which the game challenges are situated.
keywords	Game-world; game-play; architectural-design; immersive environments
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2006_471
id	caadria2006_471
authors	Y. TAKASE, K. YANO, T. NAKAYA, Y. ISODA, T. KAWASUMI, N. KAWAHARA, S. TANAKA, M. INOUE, A. TSUKAMOTO, T. KIRIMURA, K. MATSUOKA, N. SHO, A. SONE, T. HATANAKA, K. SHIMIYA, M. SHIROKI, T. MASUMI, D. KAWAHARA
year	2006
title	VR AND WEB3D-GIS APPLICATIONS USING 3D CITY MODELS
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 471-477
doi	https://doi.org/10.52842/conf.caadria.2006.x.j5g
summary	For the recent years the authors have developed techniques for automatic generation of 3D city models using LIDAR data, 2D digital map and aerial photograph, as well as a virtual reality (VR) viewer software with high-speed graphic engine which can deal with a large area of 3D city models on VR. The authors also have developed Web3D-GIS system which can provide transmission and reception of a great amount of urban information with interactive manipulation of detailed 3D city models linked with geographic information systems (GIS), on ordinary internet infrastructure such as DSL. Using those techniques and systems the authors have been conducting a research project called “Kyoto Virtual Time-Space” which aims at reconstruction and visualization of Kyoto at different eras on VR and on the internet, starting from the present and finally up to Heian era.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2006_e160c
id	sigradi2006_e160c
authors	Andrade, Max and Cheng, Liang-Yee
year	2006
title	Diretrizez Geométricas de Auxílio ao Processo de Projeto de Edifícios Residenciais [Geometrical Guidelines to Aid the Design of Floor Plants of Residential Buildings]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 243-247
summary	This paper discusses the basic principles of a geometric method to aid the design process of residential buildings. It makes part of the initial phases of a research whose aim is to develop a computer system to aid the sketching and evaluation of floor plant design of multi-storied residential buildings. The fundamental idea of the research is the existence of some basic patterns of floor plants that reflect the designer’s mental models in this category of building. The models are regarding the usage of the space such as forms and dimensions, the elements for the circulation and the external skins. During the design process, architects work on each one of these models to generate the sketches of the floor plant layout. Generally, the layout of an apartment in multi-storied buildings depends basically on the internal dynamics of the users without the complex relationship with the neighborhood environment as in the case of houses. In this way, it would be easier to identify, to organize and to associate the mental models of multi-storied buildings on geometric basis, which, in their turns, might be effectively used as inputs for the layout planning of new design. By applying the geometric basis, the architects may reduce the universe of feasible alternatives into a small group of heuristic solutions that can be described by using few simple guidelines. In addition to this, the geometric bases of the existing buildings might be used to build a knowledge-based system to aid the architectural design. The objective of this paper is to show some initial results of the research obtained from a survey and the case studies of form, dimensions and topology of existing buildings. To limit the scope of the discussion, only residential buildings with two to three bedrooms are considered. At first, a survey of plants of residential buildings with two and three bedrooms, in Brazil, is carried out. In the next step, the dimensions, shape, external skin perimeter, circulation system and accessibility are analyzed. Finally, typical topologies of the building are investigated.
keywords	Design process; geometric method; residential buildings
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2006_656
id	2006_656
authors	Breen, Jack and Martijn Stellingwerff
year	2006
title	De-coding the Vernacular - Dynamic Representation Approaches to Case-based Compositional Study
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 656-663
doi	https://doi.org/10.52842/conf.ecaade.2006.656
summary	Representational approaches have always played an important role in the design-driven development of built environments, the analytical study of architectural compositions and their effects. With the introduction – and successive steady development – of computer-based platforms of visualization, the professional and intellectual palette of designers, as well as researchers, have expanded considerably. Nonetheless, in recent years the opportunities for systematic scrutiny and understanding of the expressive qualities of design proposals and artefacts have all too frequently been overshadowed by high-flying conceptual developments and seductive representation modes. It is time that the objective description and unravelling of architectural compositions – so to speak the discipline of Ekphrasis in design practice, education and research – is once again given more prominence in architectural discourse and debate. The central idea behind this contribution is that, by linking instruments of design with the methods of formal composition and decomposition, renewed opportunities for representation-driven study in a scholarly context, focusing upon elusive compositional attributes and their workings, may be given a new impulse. The project that is presented here concerns a case-based explorative study into the domains of aesthetic convention and invention, making use of a variety of virtual and physical representation techniques. These include digital as well as tangible modelling and sketching approaches (separately and in combination), in conjunction with computer-based image manipulation techniques, making use of systematic data identification and denotation. The opportunities, merits and shortcomings of the computer-based and physical visualization approaches, which were applied and tested, are discussed on the basis of results and findings from the ongoing AA Variations project.
keywords	Design representation; Computer-based sketching; Virtual and physical modelling; Compositional variation; Contemporary aesthetics
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac20064101
id	ijac20064101
authors	Cheng, Nancy Yen-Wen
year	2006
title	Learning design sketching from animations and storyboards
source	International Journal of Architectural Computing vol. 4 - no. 1, 1-17
summary	A digital pen-and-paper system that generates stroke-by-stroke animations was used to compare the perception of interactive animations versus printed storyboards. Design students studied a space-planning example as either an animation or a storyboard and then emulated the example in doing a similar problem. Students viewing the animations rather than the storyboards performed marginally better in terms of matching the example steps and meeting design quality criteria. Students may understand the process of design sketching, but may lack the skills to copy the steps. Emulating the solution requires both cognitive skills and graphic facility. While beginners could logically organize spatial adjacencies, they often radically resized required program areas to streamline geometry. After organizing building spaces, they lacked the graphic conventions to articulate architectural features, so they could not copy refinement steps. Subjects at all levels used approximately the same number of strokes, with more productive sketching from advanced subjects.
keywords	Teaching with Technology; Sketching; Design Teaching; Pen-Based Computing
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00002
last changed	2007/03/04 07:08

_id	2006_810
id	2006_810
authors	Dokonal, Wolfgang and Knight,Michael
year	2006
title	Pen or PC? - Is Sketching essential to architectural design?
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 810-817
doi	https://doi.org/10.52842/conf.ecaade.2006.810
summary	This paper reports on an ongoing student architectural design project that is investigating the differing effects of the use of PC’s or Pens in the design process. We are interested to see whether designing wholly on the computer with a volume modeling software would produce differing results to a traditional design process with a strong basis in 2D sketching. To minimize the influence of the participants previous experience in either the use of PC’s or the pen, we have been working with very young students that have not yet gone through a traditional training on architectural design and CAAD software. This is one of the key aspects of our experimental procedure. We have found that recent software developments in the field of CAAD clearly have and will influence the way architects design and brings the computer as a design tool to the “normal architect”. Until very recently the computer was seen as a design tool almost solely for “computer geeks” in the profession, the majority of architects still using it mainly as a drafting machine or to produce visualizations of their projects after a more ‘conventional’ design process had finished. It is now very clear to us that the ongoing change in technology will have a profound effect on the way all of us will work in future undertaking architectural design. It is an important question for every school of architecture what effect these developments will have on our teaching methods and the curricula. We use the above mentioned ongoing educational project to find out about the benefits and risks of using the computer as a design tool for first year students.
keywords	Early Design stages; Collaborative Design; Sketching
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2006_074
id	2006_074
authors	Gül, Leman Figen and Mary Lou Maher
year	2006
title	The Impact of Virtual Environments on Design Collaboration
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 74-83
doi	https://doi.org/10.52842/conf.ecaade.2006.074
summary	With recent developments in communication and information technology there has been increasing research into the role and the impact of computer media in collaborative design. This paper presents a case study that compares two designers collaborating in three different types of virtual environments with face to face (FTF) collaboration. The aim of the study is to identify similarities and differences between remote locations in order to have a better understanding of the impact of different virtual environments on design collaboration. Our results show that the architects had different designing behaviour depending on the type of external representation: they developed more design concepts, and had more design iterations through analysis-synthesis-evaluation while designing FTF and in a remote sketching environment; while the same architects focused on one design concept and making the design when designing in 3D virtual worlds.
keywords	Collaborative design; virtual environments; remote sketching; 3D virtual worlds; face to face collaboration
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ascaad2006_paper4
id	ascaad2006_paper4
authors	Kouider, Tahar
year	2006
title	Evolution or Revolution: is digital conceptual design the way forward for Architects?
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This research investigates architectural conceptual design and discusses its recent historical, philosophical and theoretical development within the overall architectural design process and attempts to establish an objective definition more tuned to current thinking and advancement in technology. It also evaluates the various traditional and information technology (IT) tools available to the designer and establishes their relationship to the conceptual design process in order to identify if any of these tools, in particular the IT tools, have a role to play in the practice and the enhancement of the conceptual design process. A survey of Scottish practicing architects (small to medium size practices) was undertaken to validate the results of the investigation. The results seem to suggest that IT tools are not essential to the conceptual design process but that they are very well capable of enhancing the creativity and speed of some aspects of it. They also suggest the existence of an inherent resistance amongst Architects / designers to utilising these tools in conceptual design. It is, furthermore, identified that if practitioners were to encompass new working practices and acquire new skills, IT tools could also provide powerful new modes of communication with the client. A correlation between the size of the practice and the degree of exposure and experience of IT tools was also established. To test some of the above findings, a design studio experiment was undertaken where half of the students adopted digital tools, utilising SketchUp software and digital sketchpads, whilst the others adopted traditional tools for the conceptual design part of their projects. No attempt was made to gauge the quality of the actual designs produced. The results indicate that the SketchUp group rated their conceptual design experience higher in terms of efficiency, flexibility and communication. The control group, who had dominantly adopted traditional freehand sketching, were impressed by the outcome from the SketchUp group. All student who answered the questionnaire, both SketchUp and control groups, said they would consider adopting some form of 3D sketching in the future.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ijac20064102
id	ijac20064102
authors	Lee, Jackie Chia-Hsun; Hu, Yuchang; Selker, Ted
year	2006
title	iSphere:A free-hand 3D modeling interface
source	International Journal of Architectural Computing vol. 4 - no. 1, 19-31
summary	Making 3D models should be an easy and intuitive task like free-hand sketching. This paper presents iSphere, a 24 degree of freedom 3D input device. iSphere is a dodecahedron embedded with 12 capacitive sensors for pulling-out and pressing-in manipulation on 12 control points of 3D geometries. It exhibits a conceptual 3D modeling approach for saving mental loads of low-level commands. Using analog inputs of 3D manipulation, designers are able to have high-level modeling concepts like pushing or pulling 3D surfaces. Our experiment shows that iSphere saved steps in the selection of control points in the review of menus and leading to a clearer focus on what to build instead of how to build it. Novices saved significant time learning 3D manipulation by using iSphere to making conceptual models. However, one tradeoff of the iSphere is its lack of fidelity in its analog input mechanism.
keywords	3D Input Device; Proximity Sensing; Parametric Modeling; Human-Computer Interaction
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00003
last changed	2007/03/04 07:08

_id	caadria2006_553
id	caadria2006_553
authors	MARY LOU MAHER, ZAFER BILDA, LEMAN FIGEN GÜL, DAVID MARCHANT
year	2006
title	STUDYING COLLABORATIVE DESIGN IN FACE TO FACE, REMOTE SKETCHING, AND 3D VIRTUAL WORLD ENVIRONMENTS
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 553-555
doi	https://doi.org/10.52842/conf.caadria.2006.x.j4o
summary	The impact of collaborative design in virtual environments on the behaviour of designers depends on the nature of the design task and the resources available to the designers. By introducing new technology, we can identify the kinds of positive impacts that should be integrated, and the kinds of negative impacts that should be eliminated, in order to improve the collaborative design environment. We studied designers collaborating in three environments: (1) face-to-face with their current design and communication tools (pen and paper), (2) a shared remote drawing system (Group Board) with synchronous voice and video conference and (3) a 3D virtual world with synchronous voice and video conference. Collaborative design sessions of 5 architect pairs were video recorded. They respectively worked on separate design briefs in the three different design settings. Protocol analysis was used to study and compare collaborative design behaviour.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2006_e048c
id	sigradi2006_e048c
authors	Beck, Mateus Paulo; Brener, Rafael; Giustina, Marcelo and Turkienicz, Benamy
year	2006
title	Light and Form in Design – A Computational Approach
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 254-257
summary	Shape perception is strongly influenced by the reciprocal relation between light and form. Computational applications can increase the number of design alternatives taking into account possible variations in the relation between light and form. The aim of this study is to discuss a pedagogical experience carried out with 5th semester architectural students, based on a series of exercises prior to the term project. The exercises were concerned with the relation between light and form from an aesthetical point of view and should be understood as examples for the use of computers as tools to creatively accelerate the process of design and learning. The paper is divided in five parts. The first one describes the conceptual background for the exercises, a descriptive method for the identification of light effects in architectural objects based on ideas of shape emergence. The exercises’ methodology is explained in the second part, referring to the use of computational applications in 3-dimensional modeling, material and light simulation. The methodology includes different phases: –creation of bi-dimensional compositions according to symmetry operations; –creation of a minimal living space assigning functions to spaces originated from the former composition; –analysis of the impact of light on the form and spaces created; –alteration of form and materials creating new light effects considering the functions related to the spaces. The exercises alternate work in computational environment in two and three dimensions with the use of mockups, lamps and photography. In the third part the results –student’s design steps– are described. In the fourth part the results are analyzed and some conclusions are outlined in the fifth and last part. The use of emergent forms combined with computational tools has proved to be an effective way to achieve an accelerated understanding of the impact of light on forms as demonstrated by the evolution of the students work during the term and by their final results concerning the term project.
keywords	Architectural Design; Lighting; Design Simulation; Virtual Environment
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2006_545
id	caadria2006_545
authors	DIETRICH ELGER, ANDREAS DIECKMANN, PETER RUSSELL, THOMAS STACHELHAUS
year	2006
title	THE INTEGRATED DESIGN STUDIO: A VIEW BEHIND THE SCENES:Liquid Campus 3
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 545-548
doi	https://doi.org/10.52842/conf.caadria.2006.x.v4r
summary	Over 10 months ending in July 2005, architecture students from Aachen, Karlsruhe and Weimar took part in a design studio that differed significantly from other studios in that the result of the studio was a 1:1 realisation of the design. This is part of an evolution of the virtual faculty of architecture “Liquid Campus”, founded in 2001, which has seen the complexity of the projects steadily rise and this continued in the Project “Ein Fest: Ein Dach”. The integrated studio is arranged to encourage an active, economic and transparent learning process, which encompasses design, communication and cooperation issues. The stated goal at the beginning of the two-semester process is to build and although only a few of the ideas are realised, all participants are involved in the realisation. In this case, the project was to create “roofs” for an open-air concert for 200,000 people in Karlsruhe, Germany. The planning was carried out using the Netzentwurf platform, with which the authors have several years experience.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2006_c185c
id	sigradi2006_c185c
authors	Hernández, Silvia Patricia; Barbaresi, Paulo; Gabarro, Maximiliano and Lanzone, Luciana
year	2006
title	Diseñando con Robótica / Domótica el Espacio Interior [Design with robotic/domotic in interior spaces]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 288-292
summary	The aim of the present study is to present the experience of the teaching of interior design together with domotics in a workshop of 5th year of the Architecture School at the National University of Cordoba, Argentina. A practice of Inner Space Design is carried out in a place of the City of Cordoba; this space is refunctionalized into a commercial space. The students design spaces and develop equipment to optimize this space so as to give an answer to commercial and image needs, design tendencies and the high technology required by the domotics. We discuss the advantages of representation in 3D and the performance of animation for both adjusting the design and checking domotics application. We intend to propose objectives and useful and necessary tools in the teaching of design with front-kine technology for both the concretion of spaces and objects and their representation.
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	c8de
id	c8de
authors	Horne, Margaret; Hamza, Neveen
year	2006
title	Integration of Virtual Reality within the Built Environment Curriculum
source	ITCon Vol.11 pp. 311-324
summary	Virtual Reality (VR) technology is still perceived by many as being inaccessible and cost prohibitive with VR applications considered expensive to develop as well as challenging to operate. This paper reflects on current developments in VR technologies and describes an approach adopted for its phased integration into the academic curriculum of built environment students. The process and end results of implementing the integration are discussed and the paper illustrates the challenges of introducing VR, including the acceptance of the technology by academic staff and students, interest from industry, and issues pertaining to model development. It sets out to show that fairly sophisticated VR models can now be created by non-VR specialists using commercially available software and advocates that the implementation of VR will increase alongside industry’s adoption of these tools and the emergence of a new generation of students with VR skills. The study shows that current VR technologies, if integrated appropriately within built environment academic programmes, demonstrate clear promise to provide a foundation for more widespread collaborative working environments.
keywords	virtual reality, built environment, integration, academic curriculum
series	journal paper
type	normal paper
email
more	http://itcon.org/2006/23/
last changed	2006/06/07 23:49

_id	ascaad2006_paper18
id	ascaad2006_paper18
authors	Huang, Chie-Chieh
year	2006
title	An Approach to 3D Conceptual Modelling
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This article presents a 3D user interface required by the development of conceptual modeling. This 3D user interface provides a new structure for solving the problems of difficult interface operations and complicated commands due to the application of CAD 2D interface for controlling 3D environment. The 3D user interface integrates the controlling actions of “seeing – moving –seeing” while designers are operating CAD (Schön and Wiggins, 1992). Simple gestures are used to control the operations instead. The interface also provides a spatial positioning method which helps designers to eliminate the commands of converting a coordinate axis. The study aims to discuss the provision of more intuitively interactive control through CAD so as to fulfil the needs of designers. In our practices and experiments, a pair of LED gloves equipped with two CCD cameras for capturing is used to sense the motions of hands and positions in 3D. In addition, circuit design is applied to convert the motions of hands including selecting, browsing, zoom in / zoom out and rotating to LED switches in different colours so as to identify images.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	sigradi2006_e149b
id	sigradi2006_e149b
authors	Kendir, Elif
year	2006
title	Prêt-à-Construire – An Educational Inquiry into Computer Aided Fabrication
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 162-165
summary	This paper aims to show and discuss the relevance of developing necessary strategies for reintegrating the concept of fabrication into the architectural design process. The discussion will be partly based on the outcome of a graduate architectural design studio conducted in Spring semester 2002-2003. The graduate studio was part of a series of exploratory studies conducted on the nature of architectural design process transformed by information technologies. Preceded by studios investigating cognition and representation, this last studio focused on the concept of fabrication. The overarching aim of the studio series was to put CAD and CAM in context both within the actual architectural design process and within architectural education. The last of this series, which will be discussed within the frame of this paper, has specifically focused on CAM and the concept of fabrication in architecture. In accordance with the nature of a design studio, the research was more methodological than technical. The studio derived its main inspiration from the constructional templates used in dressmaking, which can be considered as an initial model for mass customization. In this context, the recladding of Le Corbusier’s Maison Domino was given as the main design problem, along with several methodological constraints. The main constraint was to develop the design idea through constructional drawings instead of representational ones. The students were asked to develop their volumetric ideas through digital 3D CAD models while working out structural solutions on a physical 1/50 model of Maison Domino. There was also a material constraint for the model, where only specified types of non-structural paper could be used. At this stage, origami provided the working model for adding structural strength to sheet materials. The final outcome included the explanation of different surface generation strategies and preliminary design proposals for their subcomponents. The paper will discuss both the utilized methodology and the final outcome along the lines of the issues raised during the studio sessions, some of which could be decisive in the putting into context of CAD – CAM in architectural design process. One such issue is mass customization, that is, the mass production of different specific elements with the help of CAM technologies. Another issue is “open source” design, indicating the possibility of a do-it-yourself architecture, where architecture is coded as information, and its code can be subject to change by different designers. The final key issue is the direct utilization of constructional drawings in the preliminary design phase as opposed to representational ones, which aimed at reminding the designer the final phase of fabrication right from the beginning. Finally, the paper will also point at the problems faced during the conduct of the studio and discuss those in the context of promoting CAM for architectural design and production in countries where there is no actual utilization of these technologies for these purposes yet.
keywords	Education; Fabrication; CAM
series	SIGRADI
email
last changed	2016/03/10 09:53

For more results click below: