Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	2006_810
id	2006_810
authors	Dokonal, Wolfgang and Knight,Michael
year	2006
title	Pen or PC? - Is Sketching essential to architectural design?
doi	https://doi.org/10.52842/conf.ecaade.2006.810
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 810-817
summary	This paper reports on an ongoing student architectural design project that is investigating the differing effects of the use of PC’s or Pens in the design process. We are interested to see whether designing wholly on the computer with a volume modeling software would produce differing results to a traditional design process with a strong basis in 2D sketching. To minimize the influence of the participants previous experience in either the use of PC’s or the pen, we have been working with very young students that have not yet gone through a traditional training on architectural design and CAAD software. This is one of the key aspects of our experimental procedure. We have found that recent software developments in the field of CAAD clearly have and will influence the way architects design and brings the computer as a design tool to the “normal architect”. Until very recently the computer was seen as a design tool almost solely for “computer geeks” in the profession, the majority of architects still using it mainly as a drafting machine or to produce visualizations of their projects after a more ‘conventional’ design process had finished. It is now very clear to us that the ongoing change in technology will have a profound effect on the way all of us will work in future undertaking architectural design. It is an important question for every school of architecture what effect these developments will have on our teaching methods and the curricula. We use the above mentioned ongoing educational project to find out about the benefits and risks of using the computer as a design tool for first year students.
keywords	Early Design stages; Collaborative Design; Sketching
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ascaad2006_paper12
id	ascaad2006_paper12
authors	Katodrytis, George
year	2006
title	The Autopoiesis and Mimesis of Architecture
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	The use of digital technology in architecture has proven to be more assertive than originally thought: it has reconditioned the nature of the design process, and established new practices and techniques of fabrication. The 21st century began with the technology of art. There is a new responsiveness to the reading and understanding of digital space, which is characterized by complexity and the uncanny. Recent applications in digital technology show inquisitiveness in the contentious subject Genetic Algorithms. This new architectural process is characterized by two main shifts: from poiesis (or poetry) to autopoiesis, and from authenticity to mimesis. Since evolutionary simulations give rise to new forms rather than design them, architects should now be artists and operators of both Inventive and Systematic design. Inventive design: The digital media should bring about poiesis (poetry). Digital spaces reveal and visualize the unconscious desires of urban spaces and bring forth new dreamscapes, mysterious and surreal. This implies a Freudian spatial unconscious, which can be subjected to analysis and interpretation. “Space may be the projection or the extension of the physical apparatus”, Freud noted1. Space is never universal, but subjective. A space would be a result of introjection or projection – which is to say, a product of the thinking and sensing subject as opposed to the universal and stable entity envisaged since the Enlighten. There is a spatial unconscious, susceptible to analysis and interpretation. Systematic Design: Digital media should bring about an autopoiesis. This approach calls into question traditional methods of architectural design – which replace the hierarchical processes of production known as “cause and effect” - and proposes a design process where the architect becomes a constructor of formal systems. Will the evolutionary simulation replace design? Is metric space dead? Is it replaced by the new definition of space, that of topology? The new algorithmic evolutionary conditions give architecture an autopoiesis, similar to biological dynamics. The use of algorithms in design and fabrication has shifted the role of the architect from design to programming. Parametric design has introduced another dimension: that of variation and topological evolution, breaking the authentic into the reused. Architecture now is about topology than typology, variation than authenticity, it is mimetic than original, uncanny and subconscious than merely generic. In a parallel universe, which is both algorithmic and metaphysical, the modeling machine creates a new abstraction, the morphogenesis of the “new hybrid condition”. The emphasis of the exploration is on morphological complexity. Architecture may become – paradoxically - rigorous yet more uncanny and introverted.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	caadria2006_303
id	caadria2006_303
authors	YU-CHUN HUANG
year	2006
title	A SPACE MAKE YOU LIVELY: A BRAIN-COMPUTER INTERFACE APPROACH TO SMART SPACE
doi	https://doi.org/10.52842/conf.caadria.2006.x.b8j
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 303-312
summary	This research is paying attention to the new field of “Smart Homes”. The goal of Smart Homes is to provide and more economical dwellings for humans. Le Cobusier envisioned a house as a machine for living. To enable a space to take the initiative in perceiving the demands of the user and to respond with appropriate feedback under diverse conditions, there is a new field development of Brain-Computer Interface (BCI). This research proposes, therefore, a smart space that enables the user to work in an energized way via the BCI system. When the space “perceives” that someone is getting sleepy by monitoring the user’s brainwaves, it will take appropriate action such as providing specific background music or adjusting the lighting and temperature in the room as subliminal reminders to the user to stay alert and productive.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	2006_326
id	2006_326
authors	Zisimopoulou, Katerina and Alexis Fragkiadakis
year	2006
title	Constructing the String Wall - Mapping the Material Process
doi	https://doi.org/10.52842/conf.ecaade.2006.326
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 326-335
summary	The String Wall is the emergent product of a study on technological applications in architecture. Our team attempted to test the limits of the common partition wall construction, challenging the standard notion of the partition screen wall that recedes behind the structures, spaces and objects as a background condition. Such vibrant a partition as the SW becomes the center to the formation of the space it defines. The story of the SW could be described as the organic combination of the bow and the twist. The latent materiality and geometry of the bow and the twist as composite systems that are mined for their structural, tectonic and programmatic potential are tested prior to final construction by 3D printed scaled models. The SW is composed of successive frames that consist of vertical twisted strips of plywood attached to wooden beams. These frames emulate the stud elements of the conventional dry wall partition systems and are manufactured entirely manually. On the other hand, the use of CNC milling machine is employed for the production of the bowed plywood strips that fill in the frame. Three fluctuated curvatures produce strips that are combined rhythmically to produce the striated effect of the SW. The material is manipulated in order to expose its hidden side, the sequence of the multiple layers of the different infilling conditions. The oblique perspective of the SW is achieved through a novel geometric transparency, thus offering constantly changing views to a moving observer. The manipulation of the position of the component bowed and twisted strips explore the application of a see-through condition that escapes the norm and reveals the back to the front in a unique whole. The void of the screen wall becomes ultimately programmatic through the use of light. A sequence of halogen lights situated at the top and bottom of the in-between the wooden strips void create the dumbfounded effect of the SW experience.
keywords	Digital construction methods; shape studies; rapid prototyping; 3D printer models
series	eCAADe
email
last changed	2022/06/07 07:57

_id	2006_532
id	2006_532
authors	Abdelhameed, Wael
year	2006
title	How Does the Digital Environment Change What Architects Do in the Initial Phases of the Design Process?
doi	https://doi.org/10.52842/conf.ecaade.2006.532
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 532-539
summary	Some researchers have tried to answer the question: do we need to think differently while designing in terms of the digital environment? This methodological question leads to another question: what is the range of this difference, if there is one? This research investigates the range of changes in how architects conduct and develop the initial design within the digital environment. The role offered by the digital environment in visual design thinking during conceptual designing through shaping: concepts, forms, and design methods, is identified and explored.
keywords	Conceptual designing; architects; digital environment; design process; visual design thinking
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2006_106
id	2006_106
authors	Achten, Henri
year	2006
title	Feature clusters for online recognition of graphic units in drawings
doi	https://doi.org/10.52842/conf.ecaade.2006.106
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 106-112
summary	Automated recognition of sketch drawings can provide the means for a natural interface between the designer and a design support system. Sketch drawing recognition is knowledge-intensive in the sense that the system must know what to look for in a drawing. In earlier work, we identified 24 different types of representations, termed graphic units. For recognition of graphic units we combine a multi-agent approach and online recognition. Each agent is specialised for one graphic unit. It continuously parses the online input stream for stroke features that fall within its scope. When an agent-specific threshold is reached, the agent puts a claim. Each agent has a specific cluster of features that can be viewed as distributed over a decision tree. The activation pattern of feature clusters over the decision tree is an indication which graphic unit is likely to be identified by the system. In this paper, we present the exhaustive set of features for agents and a binary decision tree over which the features are distributed.
keywords	Image recognition; sketches; graphic units; feature-based modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2006_320
id	2006_320
authors	Ahmad, Sumbul and Scott Chase
year	2006
title	Grammar Representations to Facilitate Style Innovation - An Example From Mobile Phone Design
doi	https://doi.org/10.52842/conf.ecaade.2006.320
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 320-323
summary	Previous research in generative design has suggested that shape grammar transformations could be used for developing new design styles by the systematic modification of grammars that encode existing styles. Our research explores how such grammar transformations can be facilitated to be responsive to changes in design style requirements. For this it is important to consider the structure and organization of rules, as well as the description of the styles of designs generated by a grammar. Using an example of mobile phone design, we outline the development of a flexible grammar structure that is conducive to transformations. The grammar is augmented with a style description scheme based on the concept of semantic differential to map the style characteristics of grammar components. These measures could be significant for driving purposeful grammar transformations for style adaptation and innovation.
keywords	Design grammars; style; product design; generative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2006_032
id	2006_032
authors	Al-Attili, Aghlab and Leonidas Koutsoumpos
year	2006
title	Ethics of Virtuality… Virtuality of Ethics
doi	https://doi.org/10.52842/conf.ecaade.2006.032
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 32-39
summary	This paper addresses issues pertaining to architecture, virtuality and ethics by establishing an interactive, non-linear virtual environment as a tool for investigation into the virtuality of ethics and ethics of virtuality, in the context of architecture. Starting from the assertion that ‘Virtual Environment (VE) is a metaphor of Real Environment (RE)’, we test the proposition that suggests ‘Ethics of RE can be tested and simulated in VE’. Challenging the notion that sees people reacting to VE in the same way as they interact with their surroundings in RE, we propose that since ethics are engulfing architecture they are also present and simulated in VE. Virtual architecture has elements of ethics that we refer to as ‘Ethics of Virtuality’. In this context, VE ethics seem to lose the ubiquity that is present in RE. In order to examine this hypothesis, we created a VE that corresponds to the RE of the PhD students’ offices, within the Department of Architecture, School of Arts, Culture, and Environment in the University of Edinburgh. The real life users of these offices were subjected to this VE. A qualitative method of research followed to probe their experience, focusing on issues related to ethics. Subjects were asked to give a personal accounts of their experience which gave us an insight into how they think. The compiled list of results and their evaluation showed startling possibilities, further establishing VE as an arena for investigating issues pertaining to both architecture and ethics.
keywords	Virtual Environments; Ethics; Place; Representation; Trust
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2006_040
id	2006_040
authors	Ambach, Barbara
year	2006
title	Eve’s Four Faces-Interactive surface configurations
doi	https://doi.org/10.52842/conf.ecaade.2006.040
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 40-44
summary	Eve’s Four Faces consists of a series of digitally animated and interactive surfaces. Their content and structure are derived from a collection of sources outside the conventional boundaries of architectural research, namely psychology and the broader spectrum of arts and culture. The investigation stems from a psychological study documenting the attributes and social relationships of four distinct personality prototypes; the “Individuated”, the “Traditional”, the “Conflicted” and the “Assured”. (York and John, 1992) For the purposes of this investigation, all four prototypes are assumed to be inherent, to certain degrees, in each individual; however, the propensity towards one of the prototypes forms the basis for each individual’s “personality structure”. The attributes, social implications and prospects for habitation have been translated into animations and surfaces operating within A House for Eve’s Four Faces. The presentation illustrates the potential for constructed surfaces to be configured and transformed interactively, responding to the needs and qualities associated with each prototype. The intention is to study the effects of each configuration and how it may be therapeutic in supporting, challenging or altering one’s personality as it oscillates and shifts through the four prototypical conditions.
keywords	interaction; digital; environments; psychology; prototypes
series	eCAADe
type	normal paper
last changed	2022/06/07 07:54

_id	sigradi2006_e160c
id	sigradi2006_e160c
authors	Andrade, Max and Cheng, Liang-Yee
year	2006
title	Diretrizez Geométricas de Auxílio ao Processo de Projeto de Edifícios Residenciais [Geometrical Guidelines to Aid the Design of Floor Plants of Residential Buildings]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 243-247
summary	This paper discusses the basic principles of a geometric method to aid the design process of residential buildings. It makes part of the initial phases of a research whose aim is to develop a computer system to aid the sketching and evaluation of floor plant design of multi-storied residential buildings. The fundamental idea of the research is the existence of some basic patterns of floor plants that reflect the designer’s mental models in this category of building. The models are regarding the usage of the space such as forms and dimensions, the elements for the circulation and the external skins. During the design process, architects work on each one of these models to generate the sketches of the floor plant layout. Generally, the layout of an apartment in multi-storied buildings depends basically on the internal dynamics of the users without the complex relationship with the neighborhood environment as in the case of houses. In this way, it would be easier to identify, to organize and to associate the mental models of multi-storied buildings on geometric basis, which, in their turns, might be effectively used as inputs for the layout planning of new design. By applying the geometric basis, the architects may reduce the universe of feasible alternatives into a small group of heuristic solutions that can be described by using few simple guidelines. In addition to this, the geometric bases of the existing buildings might be used to build a knowledge-based system to aid the architectural design. The objective of this paper is to show some initial results of the research obtained from a survey and the case studies of form, dimensions and topology of existing buildings. To limit the scope of the discussion, only residential buildings with two to three bedrooms are considered. At first, a survey of plants of residential buildings with two and three bedrooms, in Brazil, is carried out. In the next step, the dimensions, shape, external skin perimeter, circulation system and accessibility are analyzed. Finally, typical topologies of the building are investigated.
keywords	Design process; geometric method; residential buildings
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2006_818
id	2006_818
authors	Angulo, Antonieta
year	2006
title	Communication in the Implementation of a Metacognitive Strategy for Learning to Design
doi	https://doi.org/10.52842/conf.ecaade.2006.818
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 818-825
summary	This paper describes an instructional communication strategy that makes use of time-based media techniques (story boarding and animation) in order to empower design studios with means to promote their students’ awareness on the acquisition of metacognitive knowledge and skills. This paper highlights the importance of including the communication of the design processes in the evaluation of learning outcomes. Moreover, the paper proposes that the students should be made constantly aware of their design processes and how effective are the methods they use. It is in this state of awareness that metacognitive knowledge is acquired: knowing how to learn to design. We can cultivate, exploit and enhance the capabilities of design learners, making them more confident and independent as learners as they understand what they need to know and what kind of strategies might work for different design problems and learning opportunities. In the development of an instructional strategy to accomplish this learning goal, the paper proposes it may be possible and potentially beneficial to transfer current metacognitive support strategies from a course on computer visualization techniques to the design studios. The paper elaborates on how these communication strategies could be transferred and implemented in a design studio setting. The results of a recent controlled experiment and considerations about the cognitive style of design students will be used in the preparation of recommendations for future full scale implementations in early design studios.
keywords	Design learning; metacognitive learning strategy; time-based media
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2006_paper15
id	ascaad2006_paper15
authors	Anz, Craig and Akel Ismail Kahera
year	2006
title	Critical Environmentalism and the Practice of Re-Construction
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This research focuses on the implications and applications of “critical environmentalism” as a quintessential epistemological framework for urban interventions while implementing digital applications that foster collective, round-table approaches to design. Essentially centering the environment (Umwelt) as an encompassing and interconnecting catalyst between multiple disciplines, philosophies, and modes of inquiry and technologies, the framework reciprocally fosters individual and critical identities associated with particular places, belief systems, and their participants as a primary concern. Critical environmentalism promotes a comprehensive, reciprocally unifying epistemological framework that can significantly inform architectural interventions and the tethered use of its technologies in order to foster increased vitality and a certain coinvested attention to the complexities of the greater domain. Grounding the theory in pedagogical practice, this paper documents an approach to urban design and architectural education, implemented as a case-study and design scenario, where divergent perspectives amalgamate into emergent urban configurations, critically rooted in the conditional partialities of place. Digital technologies are incorporated along with analogical methods as tools to integrate multiple perspectives into a single, working plane. Engaging the above framework, the approach fosters a critical (re)construction and on-going, co-vested regeneration of community and the context of place while attempting to dialogically converge multiple urban conditions and modes-of-thought through the co-application of various digital technologies. Critically understanding complex urban situations involves dialogically analyzing, mapping, and modeling a discursive, categorical structure through a common goal and rationale that seeks dialectic synthesis between divergent constructions while forming mutual, catalyzing impetuses between varying facets. In essence, the integration of varying technologies in conjunction, connected to real world scenarios and a guiding epistemic framework cultivates effective cross-pollination of ideas and modes through communicative and participatory interaction. As such it also provides greater ease in crosschecking between a multitude of divergent modes playing upon urban design and community development. Since current digital technologies aid in data collection and the synthesis of information, varying factors can be more easily and collectively identified, analyzed, and then simultaneously used in subsequent design configurations. It inherently fosters the not fully realized potential to collectively overlay or montage complex patterns and thoughts seamlessly and to thus subsequently merge a multitude of corresponding design configurations simultaneously within an ongoing, usable database. As a result, the pedagogical process reveals richly textured sociocultural fabrics and thus produces distinct amplifications in complexity and attentive management of diverse issues, while also generating significant narratives and themes for fostering creative and integrative solutions. As a model for urban community and social development, critical environmentalism is further supported the integrative use of digital technologies as an effective means and management for essential, communicative interchange of knowledge and thus rapprochement between divergent modes-of-thought, promoting critical, productive interaction with others in the (co)constructive processes of our life-space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	acadia06_230
id	acadia06_230
authors	Anzalone, Phillip
year	2006
title	Synthetic Research
doi	https://doi.org/10.52842/conf.acadia.2006.230
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 230-231
summary	Synthetic Research insinuates a relationship of a meticulous process of discovering truth contradicted against a fabricated, as in concocted, reality. It is important to recognize the logical aspect of synthetic when examining what synthetic research can provide for architectural discourse. Synthesis contrasts with analysis in that it’s primary methods involve recourse to experience; it is experience that is at the heart of synthetic research. The synthesis of theory, architectural constructions, technological artifacts and computational techniques requires experiencing the results of experimentation. Synthetic digital architecture necessitates a discovery process incorporating creation that allows for experience, be it virtual reality, full-scale prototyping or spatial creations; provided experience is a truthful one, and not disingenuous and thereby slipping into the alternate definition of synthetic.Research’s experimental arm, as opposed to the analytic, relies on tinkering - implying the unfinished, the incomplete, the prototype. Examples of this are everywhere. Computer screenshots are a strikingly literal example of synthetic research when used as a means of experiencing a process. Performance mock-ups of building assemblies are a method of synthetic research in that one experiences a set of defined performances in order to discover and redefine the project. The watchmaker craft is an exercise in research/experimentation where material properties are inherent in function and aesthetics; consider how the components interact with the environment - motion, gravity, space-time, temperature. Efficiency at this point is predominantly structural and physical. Decorative or aesthetic elements are applied or integrated in later iterations along with optimization of performance, marketing and costs.What is a architectural research? How can research synthesize the wide range of possibilities for the trajectory of architecture when engaged in digital and computational techniques? The goals, techniques, documentation and other methods of research production have a place in architecture that must be explored, particularly as it related to computation. As in other fields, we must build a legitimate body of research whereby others can use and expand upon, such that digital architectures evolve in innovative as well as prosperous paths.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2006_c159e
id	sigradi2006_c159e
authors	Aroztegui Massera, Carmen
year	2006
title	Aprendiendo del cine: Evaluación de códigos formales y estrategias narrativas en una instalación de video. [Learning from the movie: Formal codes and narrative strategies in a video installation]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 415-419
summary	Architectural animations often evidence limitations when trying to get across our design intensions in terms of the experiencing of a place. When architects design a space, they propose not only geometry and space functionality, All in all, any architectural design implies a way of experiencing the space. But how can we communicate it? Narrative films developed - in the last century - communication conventions that allow the audience to feel transported to the time and place of the movie. However, architects have barely introduced these conventions into their animations. The objective of this paper is to review two examples - a scene on a film and a video installation- that could help architects to use film codes creatively in when communicating the experiencing of a place.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20064408
id	ijac20064408
authors	Ataman, Osman; Rogers, John; Ilesanmi, Adesida
year	2006
title	Redefining the Wall: Architecture, Materials and Macroelectronics
source	International Journal of Architectural Computing vol. 4 - no. 4, pp. 125-136
summary	As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of a new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology of its own.
series	journal
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000004/art00009
last changed	2007/03/04 07:08

_id	2006_664
id	2006_664
authors	Balakrishnan, Bimal; Loukas N. Kalisperis and S. Shyam Sundar
year	2006
title	Capturing Affect in Architectural Visualization - A Case for integrating 3-dimensional visualization and psychophysiology
doi	https://doi.org/10.52842/conf.ecaade.2006.664
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 664-669
summary	Envisioning architectural experience afforded by a building under design has been difficult due to two reasons. One is simulating the space in full scale, eliminating the need to take a mental leap commonly required of abstract smaller scale representations. Second challenge is in fully capturing the affective experience, which is often subtle in nature. This paper suggests that 3-dimensional visualization - particularly immersive virtual reality can overcome the first challenge. In addition, psychophysiological measures such as facial electromyography (EMG) and electrodermal activity (EDA) can be used to capture the affective component of the architectural experience. We suggest that by taking advantage of these technologies together, one can better simulate and empirically understand the nature of architectural experience.
keywords	Architectural visualization; virtual reality; psychophysiology; electrodermal activity (EDA); facial electromyography (EMG)
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2006_e159b
id	sigradi2006_e159b
authors	Barrow, Larry
year	2006
title	Digital Design Pedagogy - Basic Design - CADCAM Space Box Exploration
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 127-130
summary	This proposed paper will highlight the work of a “pre-architecture” graduate student’s work produced in a “Digital Design II” course in Spring 06. This student has a bachelor’s degree in Architectural Technologies and hopes to attend a “professional” degree program in architecture after completing our Master of Science degree program. The student entered our “pre / post-professional” graduate program as a means of learning more about design, technology and architecture. This provided a rare opportunity to do “research” in the area of digital technology in the early formative phases of a new architecture / design students development. The student chose to study “shadows” as a means of design inquiry. The primary focus of the work was the study of various “4” x 4” x 4” “space-cubes.” The student was given various “design” constraints, and “transformative” operations for the study of positive-negative space relationships, light+shadows, and surface as a means of gaining in-sight to form. The CADCAM tools proved to be empowering for the student’s exploration and learning. With the recent emergence of both more user-friendly hardware and software, we are seeing a paradigm shift in design “ideation.” This is attributed to the evolving human-computer-interface (HCI) that now allows a fluidic means of creative design ideation, digital representation and physical making. Computing technology is now infusing early conceptual design ideation and allowing designers, and form, to follow their ideas. The argument will be supported with primary evidence generated in our pedagogy and research that has shown the visualization and representational power of emerging 2D and 3D CADCAM tools. This paper will analyze the basic “digital design” process used by the writer’s student. Architectural form concepts, heretofore, impossible to model and represent, are now possible due to CADCAM. Emerging designers are integrating “digital thinking” in their fundamental conceptualization of form. These creative free-forms are only feasible for translation to tectonic form using digital design-make techniques. CADCAM tools are empowering designers for form exploration and design creativity. Current computing technology is now infusing the creative design process; the computer is becoming a design “partner” with the designer and is changing form and architecture; thus, we are now seeing unprecedented design-make creativity in architecture.
keywords	Basic Design; CADCAM; Digital Design; Virtual 3D Models; Physical 3D Printed Models
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_e048c
id	sigradi2006_e048c
authors	Beck, Mateus Paulo; Brener, Rafael; Giustina, Marcelo and Turkienicz, Benamy
year	2006
title	Light and Form in Design – A Computational Approach
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 254-257
summary	Shape perception is strongly influenced by the reciprocal relation between light and form. Computational applications can increase the number of design alternatives taking into account possible variations in the relation between light and form. The aim of this study is to discuss a pedagogical experience carried out with 5th semester architectural students, based on a series of exercises prior to the term project. The exercises were concerned with the relation between light and form from an aesthetical point of view and should be understood as examples for the use of computers as tools to creatively accelerate the process of design and learning. The paper is divided in five parts. The first one describes the conceptual background for the exercises, a descriptive method for the identification of light effects in architectural objects based on ideas of shape emergence. The exercises’ methodology is explained in the second part, referring to the use of computational applications in 3-dimensional modeling, material and light simulation. The methodology includes different phases: –creation of bi-dimensional compositions according to symmetry operations; –creation of a minimal living space assigning functions to spaces originated from the former composition; –analysis of the impact of light on the form and spaces created; –alteration of form and materials creating new light effects considering the functions related to the spaces. The exercises alternate work in computational environment in two and three dimensions with the use of mockups, lamps and photography. In the third part the results –student’s design steps– are described. In the fourth part the results are analyzed and some conclusions are outlined in the fifth and last part. The use of emergent forms combined with computational tools has proved to be an effective way to achieve an accelerated understanding of the impact of light on forms as demonstrated by the evolution of the students work during the term and by their final results concerning the term project.
keywords	Architectural Design; Lighting; Design Simulation; Virtual Environment
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	2006_868
id	2006_868
authors	Becker, Mirco
year	2006
title	Branches and Bifurcations - Building a framework for modeling with isosurfaces in Generative Components
doi	https://doi.org/10.52842/conf.ecaade.2006.868
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 868-873
summary	An isosurface is a three-dimensional representation of a constant value of a field function within a given volume. They are normally used in computer graphics to visualize data in fluid dynamics, medical imaging, geophysics, and meteorology. The advantage of isosurfaces is that they can represent all sorts of topologies. That makes them a perfect tool for modeling, branching, forking, and bifurcating objects with smooth transitions. As they work of a field function, the surface is implicit, the polygonization an approximation. This is a good base for coupling performance with precision. The task was to define a set of handles to change and model an isosurface. It had to happen through the modeling of the field function in a way that is rather intuitive but without giving up the precision one is used to have from standard NURBS/BREP modeling. The paper shows how a modeling framework for isosurfaces is implemented as a plug-in for Bentley Systems Generative Components allowing an intuitive way of exploring design variations. The implementation is illustrated with a proof of concept showing a sketch design.
keywords	Isosurface; Polygonization; Scalar field; Marching Cube; Generative Components
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: