Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 599

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2006_e165b
id	sigradi2006_e165b
authors	Angulo, Antonieta
year	2006
title	Optimization in the Balance between the Production Effort of E-learning Tutorials and their related Learning Outcome
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 122-126
summary	This paper provides evidence on the level of media richness that may be cost effective in the development of e-learning tutorials for teaching and learning computer visualization techniques. For such a purpose the author provides an analysis of low-cost / high-impact media rich products, the effort and cost required in their development and the measurement of related learning outcomes. Circa twenty years of R&D of multimedia and hypermedia applications for instruction have demonstrated the benefits of communicating relevant information to learners using engaging media. Based on this evidence, this paper assumes that due to the cognitive style of design students, the instructional packages for learning computer techniques for design visualization that are rich in media content, tend to be more effective. Available visualization technologies make the development of e-learning tutorials feasible and apparently the logical way to implement our instructional packages. However the question in the development of e-learning tutorials becomes a more strategic one when we are called to reach a level of optimization between producing a package with a basic standard, namely; text & still-graphic based tutorials, or a state-of-the-art package that is based on video demonstrations (more than enough?) that can accommodate the students’ learning requirements and also our production costs. The costs include the human resources (instructor, producers, assistants and others) and the material resources (hardware and software, copies, and others) involved in the creation of the e-learning tutorials. The key question is: What is good enough, and what is clearly superfluous? In order to confirm our hypothesis and propose a relevant balance between media richness and learning effectiveness, this paper describes an experiment in the use of two different levels of media richness as used to deliver instructions on the production of computer animations for design visualization. The students recruited for this experiment were fairly familiarized with the use of 3D modeling concepts and software, but had no previous knowledge of the techniques included in the tutorials; in specific; camera animation procedures. The students, separated in two groups, used one of the two methods; then they proceeded to apply their newly acquired skills in the production of an animation without using the help of any external means. The assessment of results was based on the quality of the final product and the students’ performance in the recall of the production procedures. Finally an interview with the students was conducted on their perception of what was accomplished from a metacognitive point of view. The results were processed in order to establish comparisons between the different levels of achievement and the students’ metacognitive assessment of learning. These results have helped us to create a clear set of recommendations for the production of e-learning tutorials and their conditions for implementation. The most beneficial characteristics of the two tested methods in relation to type of information, choice of media, method of information delivery, flexibility of production/editorial tools,! and overall cost of production, will be transferred into the development of a more refined product to be tested at larger scale.
keywords	e-learning tutorials; media richness; learning effectiveness; cognitive style; computer visualization techniques
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_e159b
id	sigradi2006_e159b
authors	Barrow, Larry
year	2006
title	Digital Design Pedagogy - Basic Design - CADCAM Space Box Exploration
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 127-130
summary	This proposed paper will highlight the work of a “pre-architecture” graduate student’s work produced in a “Digital Design II” course in Spring 06. This student has a bachelor’s degree in Architectural Technologies and hopes to attend a “professional” degree program in architecture after completing our Master of Science degree program. The student entered our “pre / post-professional” graduate program as a means of learning more about design, technology and architecture. This provided a rare opportunity to do “research” in the area of digital technology in the early formative phases of a new architecture / design students development. The student chose to study “shadows” as a means of design inquiry. The primary focus of the work was the study of various “4” x 4” x 4” “space-cubes.” The student was given various “design” constraints, and “transformative” operations for the study of positive-negative space relationships, light+shadows, and surface as a means of gaining in-sight to form. The CADCAM tools proved to be empowering for the student’s exploration and learning. With the recent emergence of both more user-friendly hardware and software, we are seeing a paradigm shift in design “ideation.” This is attributed to the evolving human-computer-interface (HCI) that now allows a fluidic means of creative design ideation, digital representation and physical making. Computing technology is now infusing early conceptual design ideation and allowing designers, and form, to follow their ideas. The argument will be supported with primary evidence generated in our pedagogy and research that has shown the visualization and representational power of emerging 2D and 3D CADCAM tools. This paper will analyze the basic “digital design” process used by the writer’s student. Architectural form concepts, heretofore, impossible to model and represent, are now possible due to CADCAM. Emerging designers are integrating “digital thinking” in their fundamental conceptualization of form. These creative free-forms are only feasible for translation to tectonic form using digital design-make techniques. CADCAM tools are empowering designers for form exploration and design creativity. Current computing technology is now infusing the creative design process; the computer is becoming a design “partner” with the designer and is changing form and architecture; thus, we are now seeing unprecedented design-make creativity in architecture.
keywords	Basic Design; CADCAM; Digital Design; Virtual 3D Models; Physical 3D Printed Models
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2006_c048c
id	sigradi2006_c048c
authors	Bruscato Portella, Underléa
year	2006
title	I+D _ Ideación Digital en la Arquitectura Actual [I+D_Digital ideas in contemporary architecture]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 258-262
summary	Based on study of recent projects develop by reputed architectural firms, this paper reviews the role of digital techniques in the conception of design, describing mainly the proposals for Philarmonic Orchestra of Copenhagen by Jean Nouvel and the Harbour of Tenerife by Herzog and De Meuron, Both projects state innovative architectural concepts with diverse graphic resources. Digital media is not used as a specific tool, but as an integrated repertoire related to design issues, Image processing, photo-collages, 3D modelling, renderings, colored layouts and graphic sequences are applied to explore novelty shapes, spatial qualities, functional arrangements and constructive strategies. In these cases computer technologies are participating in design generation supporting overall architectural creativity. In order to benefit from new design media that approach express the relevance of firms' culture related to innovation and development (I+D).
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia06_148
id	acadia06_148
authors	Cabrinha, Mark
year	2006
title	Synthetic Pedagogy
doi	https://doi.org/10.52842/conf.acadia.2006.148
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 148-149
summary	As tools, techniques, and technologies expand design practice, there is likewise an innovation in design teaching shifting technology from a means of production and representation to a means of discovery and development. This has implications on studio culture and design pedagogy. Expanding the skills based notion of digital design from know-how, or know-how-to-do, toward know-for, or knowledge-for-action, forms a synthetic relationship between the skills necessary for action and the developing motivations of a young designer. This shifts digital design pedagogy to a medium of active inquiry through play and precision. As digital tools and infrastructure are now ubiquitous in most schools, including the increasing digital material exchange enabled through laser cutters, CNC routers, and rapid prototyping, this topic node presents research papers that engage technology not simply as tools to be taught, but as cognitive technologies which motivate and structure a design students knowledge, both tacit and explicit, in developing a digital and material, ecological and social synthetic environment. Digital fabrication, the Building Information Model, and parametric modeling have currency in architectural education today yet, beyond the instrumentality of teaching the tool, seldom is it questioned what the deeper motivations these technologies suggest. Each of these tools in their own way form a synthesis between representational artifacts and the technological impact on process weaving a wider web of materials, collaboration among peers and consultants, and engagement of the environment that the products of design are situated in.If it is true that this synthetic environment enabled by tools, techniques, and technologies moves from a representational model to a process model of design, the engagement of these tools in the design process is of critical importance in design education. What is the relationship between representation, simulation, and physical material in a digitally mediated design education? At the core of synthetic pedagogies is an underlying principle to form relationships of teaching architecture through digital tools, rather than simply teaching the tools themselves. What principles are taught through teaching with these tools, and furthermore, what new principles might these tools develop?
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2006_c133d
id	sigradi2006_c133d
authors	Castañé, Dora
year	2006
title	Rosario, Views on the Integral Revitalization of a Cultural Heritage
source	SIGraDi 2006 - [10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006
summary	This work shows the study of the methods and techniques for the development of a virtual vision VRML 3D included in an "Digitally-integrated knowledge base" with interactive interphases of a significantly revitalized fragment of a central area of the city of Rosario, Province of Santa Fé, Argentina, that includes an emblematic heritage for the Argentineans: the National Monument to the Flag. Digital models that partly allow the development of a hypothesis of integration between the digitized information and information technology - new digital proximity - to the effects of being able to investigate the generation of multimedia database that includes three-dimensional and dynamic models of the mentioned type, in this case, urban, architectonic, and cultural heritage. Different views and research on heritage have been developing. Nevertheless, the use of these new 3D non-immersive technologies and inter-phases are opening a new field of vision and understanding of the subject.
keywords	Urban-architectural planning; heritage; virtual reality
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:48

_id	2006_832
id	2006_832
authors	El-Khoury, Nada; De Paoli Giovanni and Dorta Tomás
year	2006
title	Digital Reconstruction as a means of understanding a building’s history - Case studies of a multilayer prototype
doi	https://doi.org/10.52842/conf.ecaade.2006.832
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 832-839
summary	The experiments presented in this paper are situated at the crossroads of two fields: the understanding and communication of history to students and the field of Information and Communication Technologies (ICT). More specifically, we aim to propose to students, ways of transferring information about lifestyles and techniques linked to the construction methods used in the past and which are present in ancient sites. It is not merely a question of proposing experiments for managing an inventory of knowledge such as that summarized in historical texts, but rather a means for understanding it: How do we communicate the invisible? How do we make visible what we cannot see but that we can imagine lies beneath the ruins of ancient sites? Lastly, how do we propose new approaches in the transferring of these historic skills and lifestyles? Such are the questions that the students’ experiments will attempt to answer while using computers as cognitive tools. In this case, these cognitive tools are designated as “multilayer prototypes” which aim to develop a dynamic virtual history space through augmented reality.
keywords	ICT; Byblos; multilayer prototype; augmented reality; education research
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaadesigradi2019_027
id	ecaadesigradi2019_027
authors	Erzetic, Catherine, Dobbs, Tiara, Fabbri, Alessandra, Gardner, Nicole, Haeusler, M. Hank and Zavoleas, Yannis
year	2019
title	Enhancing User-Engagement in the Design Process through Augmented Reality Applications
doi	https://doi.org/10.52842/conf.ecaade.2019.2.423
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 423-432
summary	Augmented Reality (AR) technologies are often perceived as the most impactful method to enhance the communication between the designer and the client during the iterative design process. However, the significance of designing the User Interface (UI) and the User Experience (UX) are often underestimated. To intercede, this research aims to employ new and existing techniques to develop UI's, and comparatively assess "the accuracy and completeness with which specified users can achieve specified goals in particular environments" (Stone, 2005) - a notion this research delineates as 'effectiveness'. Prompted by the work of key scholars, the developed UI's were assessed through the lens of existing UI evaluation techniques, including: Usability Heuristics (Nielsen, 1994) and Visual and Cognitive Heuristics (Zuk and Carpendale, 2006). In partnership with PTW Architects, characteristics such as the rapidity and complexity of interactions, in conjunction with the interface's simplicity and intuitiveness, were extracted from 15 trials underwent by architectural practitioners. The outcomes of this research highlights strategies for the effective development of user interface design for mobile augmented reality applications.
keywords	User Interface; Human Centered Design; User Experience; Heuristics; Usability Inspection Method
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	2006_352
id	2006_352
authors	Fricker, Pia and Oskar Zieta
year	2006
title	CNC Compliant Methods of Design - Understanding Technology
doi	https://doi.org/10.52842/conf.ecaade.2006.352
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 352-357
summary	This paper investigates new design methods, showing the experimental use of new digital tools, CNC-techniques and technologies so as to expand the definition of contemporary architecture. This investigation of new technologies extends the traditional practice of architectural design to include issues of design, multimedia, programming, control systems and fabrication by using computer controlled machines. The main teaching and research focus of the Master of Advanced Studies in Architecture (MAS), Specialization in Computer Aided Architectural Design (CAAD), Prof. Dr. Ludger Hovestadt, is the computer based architectural design and its automated production. The aim of our research and teaching project is to achieve a close connection between design and production by embedding the “digital chain” in the whole process. The digital chain is a design and production sequence with no analogue steps; the process offers high flexibility in terms of design and production. The use of new digital tools in architecture extends the profession beyond traditional design.
keywords	Digital Methods of Construction; Representation; Integration of CNC technology in Education; Digital Chain
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2006_e090b
id	sigradi2006_e090b
authors	Hanna, Sean and Turner, Alasdair
year	2006
title	Teaching parametric design in code and construction
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 158-161
summary	Automated manufacturing processes with the ability to translate digital models into physical form promise both an increase in the complexity of what can be built, and through rapid prototyping, a possibility to experiment easily with tangible examples of the evolving design. The increasing literacy of designers in computer languages, on the other hand, offers a new range of techniques through which the models themselves might be generated. This paper reviews the results of an integrated parametric modelling and digital manufacturing workshop combining participants with a background in computer programming with those with a background in fabrication. Its aim was both to encourage collaboration in a domain that overlaps both backgrounds, as well as to explore the ways in which the two working methods naturally extend the boundaries of traditional parametric design. The types of projects chosen by the students, the working methods adopted and progress made will be discussed in light of future educational possibilities, and of the future direction of parametric tools themselves. Where standard CAD constructs isolated geometric primitives, parametric models allow the user to set up a hierarchy of relationships, deferring such details as specific dimension and sometimes quantity to a later point. Usually these are captured by a geometric schema. Many such relationships in real design however, can not be defined in terms of geometry alone. Logical operations, environmental effects such as lighting and air flow, the behaviour of people and the dynamic behaviour of materials are all essential design parameters that require other methods of definition, including the algorithm. It has been our position that the skills of the programmer are necessary in the future of design. Bentley’s Generative Components software was used as the primary vehicle for the workshop design projects. Built within the familiar Microstation framework, it enables the construction of a parametric model at a range of different interfaces, from purely graphic through to entirely code based, thus allowing the manipulation of such non-geometric, algorithmic relationships as described above. Two-dimensional laser cutting was the primary fabrication method, allowing for rapid manufacturing, and in some cases iterative physical testing. The two technologies have led in the workshop to working methods that extend the geometric schema: the first, by forcing an explicit understanding of design as procedural, and the second by encouraging physical experimentation and optimisation. The resulting projects have tended to focus on responsiveness to conditions either coded or incorporated into experimental loop. Examples will be discussed. While programming languages and geometry are universal in intent, their constraints on the design process were still notable. The default data structures of computer languages (in particular the rectangular array) replace one schema limitation with another. The indexing of data in this way is conceptually hard-wired into much of our thinking both in CAD and in code. Thankfully this can be overcome with a bit of programming, but the number of projects which have required this suggests that more intuitive, or spatial methods of data access might be developed in the future.
keywords	generative design; parametric model; teaching
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2006_e145a
id	sigradi2006_e145a
authors	Heiss, Leah
year	2006
title	Empathy over distance: Wearables as tools for augmenting Remote Emotional Connection
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 66-69
summary	Mainstream communication modes emphasise network speed, connection access, resolution, portability, and aesthetic design as primary to the success of their products. Within this vision a three by four centimetre screen and high resolution display are deemed adequate to emulate the intensities and complexities of face-to-face connection with loved ones. They allow us to ‘be there with you’ from wherever we might be. Yet interpersonal communication is a massively complex phenomenon. It involves a plethora of micro-activities which occur at a physical, physiological, and psychological level allowing us to recognise at a cellular scale intention, motive and emotional authenticity. Our conscious and non-conscious involvement in spatially collocated communication is substantial due to these myriad channels of real-time bi-directional information transfer. While contemporary communications technologies have the capacity to mediate our relationships, they fall short of encouraging the richness of spatially co-present interaction. The research discussed in this paper investigates the potential expansion of remote connection when electronically enhanced apparel is incorporated into the communications mix. Rather than pursuing the manifold functionalities of traditional communications media the garments discussed focus solely on the goal of enhancing empathy between physically distant individuals. This paper reports on the development and testing of a range of garments that conduct presence information between remotely located people. The garments sense, process, transmit and receive the heartbeat wavelength (ECG). They are enabled with ECG sensors, signal processing equipment, small vibration motors, and radio transceivers which allow users to ‘feel’ the heartbeat of a remote friend/lover/relative as vibration through their garment. The prototypes aim to enrich the remote communications experience through reintroducing an embodied, tactile dimension that is present in face-to-face communication. A range of user testing trials will be discussed which have been undertaken to assess the impact of the garments at a conscious and a non-conscious level. Conscious experiences were gauged through qualitative testing, by way of interviews and unsolicited written reactions, which have provided a range of engaging emotional responses. Non-conscious physiological reactions were assessed by recording ECG throughout user-testing periods. This data has been processed using HRV (heart rate variability) analysis software, running on MatLab. Preliminary results suggest that users have strong conscious and non-conscious reactions to the experience of wearing the prototype garments. The paper will describe the data processing techniques and findings of the user testing trials. The development of biosignal sensing garments has raised a range of issues including: innovative potentials for embedded peripheral awareness media; the expansion of the classical body to incorporate remotely sensed information; the issue of data semantics and the development of intensely personal non-verbal languages; and the issue of corporeal privacy when one’s biological information is exposed for potential download. They also bring into question how our bodily experiences might change when we incorporate remote sensory systems.
keywords	Enabled apparel; emotional tools; biosignals
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	2006_444
id	2006_444
authors	Horne, Margaret and Emine Mine Thompson
year	2006
title	Extending the Palette - An analysis of the heterogeneity of techniques for communicating space
doi	https://doi.org/10.52842/conf.ecaade.2006.444
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 444-453
summary	This study offers an analysis of the increasing range of communication methods required by the emerging profession of the architectural technologist. It reviews the process of introducing methods of communication into the academic curriculum of undergraduate architectural technology students who have a need to select appropriate techniques in order to communicate to various stakeholders, design teams and clients. The paper reviews the integration of three-dimensional computer modelling technologies for the analysis and communication of proposed designs and considers the knowledge and skills which will be required to enable effective representation of increasingly complex buildings.
keywords	Architectural Technology; Undergraduate Curriculum; Communication Methods; Virtual Reality
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2006_710
id	2006_710
authors	Jemtrud, Michael; Philam Nguyen; James Hayes; Grant Oikawa and Ryan McLennan
year	2006
title	A Theory of Artistry for 3D Data Fusion - The element of craft in digital reconstruction
doi	https://doi.org/10.52842/conf.ecaade.2006.710
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 710-713
summary	The following paper will articulate through an urban renewal proposal project for an area in Montréal, Canada that uses a “3D imaging and modeling protocol” and that accounts for the interaction between mediation and making in digitizing and constructing existing conditions digital artifacts. The protocol incorporates multi-sensor technologies with modeling and rendering techniques through a process of interpolation between a heterogeneous set of existing photographic, physical, and 2D documentation. The mode of operation implemented is a multi-layered and hybrid approach that recognizes the interplay between human scale and perception, visualization and abstraction of data and geometric accuracy, space and time.
keywords	3D modeling; digital reconstruction; craft; urban re-development
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ijac20064308
id	ijac20064308
authors	Kenzari, Bechir
year	2006
title	Physical Modeling: the Convergence of Cutting-edge Technologies and Miniature Tooling
source	International Journal of Architectural Computing vol. 4 - no. 3, 119-134
summary	When Rapid Prototyping and CAD/CAM technologies (including CNC and Laser Cutting) became affordable, ten years ago or so, their reception within model-making circles turned from positive to disappointing because of their incomplete adaptability to the making of architectural objects. Then it was discovered, just few years later, that many modeling details can only be worked out through the use of specific materials, accessories and miniature tools which neither fall under the CNC, Laser or Rapid Prototyping headings. This new situation has implied, among other things, that the status of the model is to be defined in terms of a convergence of particular technological possibilities. Using two specific models as examples, the present article will debate this convergence, which is now allowing a smooth and fluid interaction between several model-making techniques. The tendency of model-making to move closer to the real act of building will also be highlighted.
series	journal
last changed	2007/03/04 07:08

_id	sigradi2006_p018d
id	sigradi2006_p018d
authors	Leão de Amorim, Arivaldo; Nogueira, Fabiano de Souza and Groetelaars, Natalie Johanna
year	2006
title	Em busca de uma Metodologia para Atualização cartográfica com tecnologias alternativas: um estudo de caso [Metodologyc search for a cartographic actualization with alternative technologies: A case study]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 368-372
summary	This paper presents an experiment using digital photogrammetry for the restitution of urban forms, using precise and low cost techniques, an alternative solution for the cartographic actualization of cities. The technique uses digital cameras (non-metric), with resolution compatible with the precision and scale required for the products. This process simplifies the acquisition of the photos, that can be taken by different places: in the ground, in the top of high buildings or by small airplanes or ultralights, in opposition of the traditional image acquisition method, done by costly aerial photogrammetric flights, realized by specialized companies.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	acadia06_064
id	acadia06_064
authors	Luhan, Gregory A.
year	2006
title	Synthetic Making
doi	https://doi.org/10.52842/conf.acadia.2006.064
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 64-67
summary	Various approaches of virtual and physical modeling have led to a synthetic form of making that is plastic and scalable in nature. This shift from traditional forms of representing and generating architecture now offers a better possibility of full-scale construction and fabrication processes and links transparently to industry. Architects are beginning to dynamically inform the visioning processes of assemblies and design through a range of precise subassemblies. Further to this end, the synthetic techniques and materials are opening up avenues for designers to investigate a range of fibers and fabrics that radically transform light and color renditions, and texture. Investigations in the realm of traditional materials such as stone, wood, and concrete continue to evolve, as do their associated methods of making. As a result of synthetic technologies, architects today have the possibility to work along side industry engineers and professionals to design castings, moldings, patterns, and tools that challenge not only the architectural work of art, but industrial and product design as well. This cultural shift from physical space to virtual space back to physical space and the combination of hand-, digital-, and robotic-making offers a unique juxtaposition of the built artifact to its manufacturing that challenges both spatial conventions and also the levels of precision and tolerance by which buildings are assembled. Traditional forms of documentation for example result typically in discrepancies between the drawn and the actualized which are now challenged by the level of precision and tolerance at the virtual level. It is within this context that leading-edge architects and designers operate today. Yet, how the profession and the academy respond to these opportunities remains an open line of inquiry and addressing these concerns opens up the rich potential enabled through synthetic making.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	sigradi2006_e151c
id	sigradi2006_e151c
authors	Neumann, Oliver and Schmidt, Daniel
year	2006
title	CNC Timber Framing – Innovative Applications of Digital Wood Fabrication Technology
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 304-307
summary	The discourse on depleting natural resources and compromised environments have led to extended research on sustainable designs methods, building practices and materials. Beyond the actual performance of building products and components, research on sustainable building increasingly focuses on the long-term effects of the production, application and life cycle of building materials on the natural environment, human inhabitation and quality of life. Computer aided manufacturing technologies play a significant role not only in the transformation of design and building methods, but also in an extended discourse on cultural development. Globally available technologies connect the design and building process to a broad range of long-term ecological factors by creating a correlation between "the emergent political, economical and social processes and … architectural techniques, geometries and organization." Through this interrelationship to economy and culture, technology and its applications are also directly related to notions of place and territory as well as to fundamental ideas of ecology. The collaborative research and design study for an outdoor theater roof structure at the University of British Columbia Malcolm Knapp Research Forest at Maple Ridge, B.C., Canada, focuses on the use of digital media in prefabrication and material optimization. By utilizing small square section timber and minimizing the use of alienating connectors the research on the wood roof structure illustrates the potential of a design culture that seeks innovation in a broader understanding of ecology routed in regional culture, environmental conditions, economy and tradition. Labor intensive manufacturing techniques are redefined aided by computer controlled machines and virtual modeling of complex geometries is translated into simple operations. The result is a more sensible and accurate response to the place’s demands. In order to generate innovative design interventions that make a constructive long-term contribution to the preservation, maintenance and evolution of the environment, design needs to be based on a comprehensive understanding of its context and the distinctive qualities of the materials used. Following the example of the outdoor roof structure, this paper aims to define innovative design as work that resonates at the intersection of the fields of technology, material science, manufacturing processes, techniques of assembly and context that constitute the expanded context or complex ecology that projects need to engage. It is in design research studies like for the outdoor theater roof structure with focus on CNC wood fabrication technologies that the common design and building discourse is put to question, boundaries are explored and expanded and the collective understanding is improved towards ecological design.
keywords	CNC Wood Fabrication; Design Innovation; Ecology
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	bsct_paipai
id	bsct_paipai
authors	Paipai, Angeliki
year	2006
title	Computational Assessment of Passive Cooling Methods in Buildings
source	Vienna University of Technology; Building Science & Technology
summary	Various factors have been contributing to a recent steady increase in buildings’ demands for cooling energy: environmental changes, increased heat gains due to equipment and growing expectations in view of acceptable indoor thermal conditions. Given this context, it’s both environmentally and economically meaningful to develop and implement passive cooling techniques toward the reduction of buildings’ demand for cooling energy. In the present study, we use parametric simulations to compute the relative impact of various passive cooling technologies toward the reduction of overheating risk in residential buildings. The cooling measures under examination are shading, natural ventilation (emphasizing on night time natural ventilation), and the application of phase change materials (PCM). The buildings that are being used for the parametric studies are an apartment and a double-storey single house, both simulated for a Mediterranean climate (Athens, Greece) and middle-European one (Vienna, Austria). The results showed that passive cooling methods can significantly contribute the reduction of overheating in buildings. In particular shading and night time ventilation have been shown to be very effective especially if applied in combination. PCMs on the other hand, showed a limited potential in the reduction of overheating risk, at least under the specific climatic circumstances.
keywords	Passive cooling; Parametric modeling; Thermal storage; Night ventilation; Phase Changing materials
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2006/07/02 22:30

_id	acadia08_382
id	acadia08_382
authors	Peters, Brady; Xavier De Kestelier
year	2008
title	Rapid Prototyping and Rapid Manufacturing at Foster + Partners
doi	https://doi.org/10.52842/conf.acadia.2008.382
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 382-389
summary	Over the last 15 years, rapid prototyping has been an integral part of the design process in the car and aerospace industry (Brad Fox 2006). Recently the architecture profession has started to use these techniques in its design process (Greg Corke 2006), and some architecture schools have begun experimenting with these technologies. ¶ Foster + Partners have been one of the first architecture practices to fully integrate rapid prototyping within its design process. The technology was initially seen as a sketch model making tool in the early stages of the design, in particular for projects with complicated geometries. It surpassed this purpose within a year and it is now seen an essential design tool for many projects and in for many project stages. The office’s rapid prototyping department now produces about 3500 models a year. ¶ Besides, or perhaps because of, rapid prototyping, Foster + Partners have started to experiment with rapid manufacturing. This first was done through the design and manufacture of a Christmas tree for the charity organisation Save the Children.
keywords	Complex Geometry; Design; Generative; Process; Rapid Prototyping
series	ACADIA
last changed	2022/06/07 08:00

_id	sigradi2006_c012b
id	sigradi2006_c012b
authors	Rodriguez Barros, Diana and Carmena, Sonia
year	2006
title	Estudio Descriptivo de Prácticas Padagógicas Mediadas por Tecnologías Digitales en Facultades de Arquitectura y Diseño asociadas a la buena Enseñanza [Descriptive study of pedagogical practices mediated by digital technologies in school of architecture and design, associated to the good education]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 191-194
summary	It is presented a descriptive type study link to the documentary investigation. It is considers to understand, interpretate and critically reconstruct the present practices of proyectual education in studio of school of architecture and design of the region in virtual surroundings, tie to good education. It was used the Burbules & Callister (2001) new emergent postecnocratic approach. It is boarded from the perspective of the authors, in its natural scenes, in its all complexity and its implicances. One worked with a quanti-qualitative methodology, where revision techniques, analysis, evaluation and interpretation of documental textual and visual materials from primary sources were integrated. One has been based on the selection of exposed works in Sigradi congresses, since its creation in 1997 to the present, with extended and updated versions of the authors. As conclusions are recognized professors that show expertise and disciplinar control, that develop investigation tasks tie to the education practices, that incorporate technologies valuating limitations and advantages, and that has recognized the multiple implicit effects in the technologically mediated practices.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	a3c8
id	a3c8
authors	Verdy Kwee, Dean Bruton, Antony Radford
year	2006
title	Visual Expressiveness in Educative Architectural Animations
source	Proceedings of the 4th international conference on Computer graphics and interactive techniques in Australasia and Southeast Asia. 2006, Kuala Lumpur, Malaysia November 29 - December 02, 2006
summary	Consider the current graphic capabilities of multimedia authoring tools. Many information technologies have been exploited to the fullest in the gaming and advertising industries. As far as educational materials produced to explain outstanding architectural and many heritage works, most publications still rely on print media. While much digital information has been propagated online through the Internet (and a few CD-ROM formats could also be found) the techniques of delivery have yet to take advantage of potential technologies, preferring only to digitally replicate and hyperlink the structure and content found in their printed cousins. The reason for this slow adoption is not clear and paradoxical since our society places abundant emphasis and stresses the importance of education over games. However, it seems that the industry and, more importantly, the architecture discipline themselves do not appear to promote architectural visualisations as a significant contributor to the education and learning process. Therefore, educative architectural information visualisation may have to set itself apart, especially to generate growth and interest in this area. This paper does not deal with the technical aspects of visualisation creation processes but proposes to emphasise architectural visualisations – animations, in particular - as a heightened form of art that could be approached with grammatical lens more than merely a technical exercise that aims to serve an outcome or an industry as they are often perceived now. Digital architectural visualisations and their delivery techniques can be expanded much more as an artistic (architectural) expression like architectural writings are to authors, games to game designers. Although differences could be identified, there are numerous lessons that can be drawn from other forms of art to propel architectural visualisations to a new level beyond those seen in real-estate websites, architectural practices and most students’ works in reputed educational institutions. Architectural information is peculiar to each building. In order to explicate the essences of architectural works (i.e. the vocabularies, designer’s intents, etc), in all fairness, their presentations cannot be generically produced and uniformly adapted. What one technique and approach could successfully achieve in explaining one building cannot exactly be re-applied to another building with the same expected results. Forms, scales, circulation paths, lighting assignments, designer’s intents, other information (and types) to be delivered differ from one building to another. As such, executions are also wide open to be explored to not only address the practical issues but also to express the intentions of the author/s or director/s to strengthen the architectural narratives. This paper highlights and illustrates by examples, specifically in architectural flythroughs/animations, considerations that need to be addressed in order that the results would serve as an artistic/architectural expression with a degree of educative substance.
keywords	Educative, education, animation, flythrough, expression, grammar, art,
series	other
type	short paper
email
more	http://portal.acm.org/citation.cfm?id=1174429.1174461&coll=GUIDE&dl=%23url.coll
last changed	2007/01/04 00:14

For more results click below: